Lines Matching refs:hostapd

1 hostapd, wpa_supplicant and the Multi-AP Specification
4 This document describes how hostapd and wpa_supplicant can be configured to
18 hostapd/wpa_supplicant. hostapd/wpa_supplicant is only involved for the items
20 daemon, e.g., prplMesh [2]. That daemon also needs to communicate with hostapd,
22 hostapd interfaces.
24 hostapd/wpa_supplicant needs to be configured specifically to support:
36 From the point of view of hostapd, there is nothing special about these
46 A backhaul link must be treated specially by hostapd and wpa_supplicant. One
63 be handled specially by hostapd, because it must add an additional information
73 A BSS is configured in Multi-AP mode in hostapd by setting the 'multi_ap'
75 (simultaneous backhaul and fronthaul BSS). If this option is set, hostapd
78 hostapd sets up 4-address mode. Since there may be multiple stations connected
94 hostapd on AP). Note that point 1 means that hostapd must not be configured
95 with WPS support on the backhaul BSS (multi_ap=1). hostapd does not check for
112 BSS in hostapd.conf. The WPS configuration purely works on the fronthaul BSS.
114 a Multi-AP backhaul link, hostapd must not respond with the normal fronthaul
118 To support this, hostapd has the 'multi_ap_backhaul_ssid',
121 credentials when hostapd receives a WPS M1 message with the Multi-AP IE. Only
141 in hostapd on Registrar AP).