1#!/bin/awk -f 2# scripts/options.awk - library build configuration control 3# 4# last changed in libpng version 1.6.11 - June 5, 2014 5# 6# Copyright (c) 1998-2014 Glenn Randers-Pehrson 7# 8# This code is released under the libpng license. 9# For conditions of distribution and use, see the disclaimer 10# and license in png.h 11 12# The output of this script is written to the file given by 13# the variable 'out'. The script is run twice, once with 14# an intermediate output file, 'options.tmp' then again on 15# that file to produce the final output: 16# 17# awk -f scripts/options.awk out=options.tmp scripts/options.dfa 1>&2 18# awk -f scripts/options.awk out=options.dfn options.tmp 1>&2 19# 20# Some options may be specified on the command line: 21# 22# deb=1 Causes debugging to be output 23# logunsupported=1 Causes all options to be recorded in the output 24# everything=off Causes all options to be disabled by default 25# everything=on Causes all options to be enabled by default 26# 27# If awk fails on your platform, try nawk instead. 28# 29# These options may also be specified in the original input file (and 30# are copied to the preprocessed file). 31 32BEGIN{ 33 out="" # intermediate, preprocessed, file 34 pre=-1 # preprocess (first line) 35 version="libpng version unknown" # version information 36 version_file="" # where to find the version 37 err=0 # in-line exit sets this 38 # The following definitions prevent the C preprocessor noticing the lines 39 # that will be in the final output file. Some C preprocessors tokenise 40 # the lines, for example by inserting spaces around operators, and all 41 # C preprocessors notice lines that start with '#', most remove comments. 42 # The technique adopted here is to make the final output lines into 43 # C strings (enclosed in double quotes), preceeded by PNG_DFN. As a 44 # consequence the output cannot contain a 'raw' double quote - instead put 45 # @' in, this will be replaced by a single " afterward. See the parser 46 # script dfn.awk for more capabilities (not required here). Note that if 47 # you need a " in a 'setting' in pnglibconf.dfa it must also be @'! 48 dq="@'" # For a single double quote 49 start=" PNG_DFN \"" # Start stuff to output (can't contain a "!) 50 end="\" " # End stuff to output 51 subs="@\" " # Substitute start (substitute a C macro) 52 sube=" \"@" # Substitute end 53 comment=start "/*" # Comment start 54 cend="*/" end # Comment end 55 def=start "#define PNG_" # Arbitrary define 56 sup="_SUPPORTED" end # end supported option 57 und=comment "#undef PNG_" # Unsupported option 58 une="_SUPPORTED" cend # end unsupported option 59 error=start "ERROR:" # error message, terminate with 'end' 60 61 # Variables 62 deb=0 # debug - set on command line 63 everything="" # do not override defaults 64 logunsupported=0 # write unsupported options too 65 66 # Precreate arrays 67 # for each option: 68 option[""] = "" # list of all options: default enabled/disabled 69 done[""] = 1 # marks option as having been output 70 requires[""] = "" # requires by option 71 iffs[""] = "" # if by option 72 enabledby[""] = "" # options that enable it by option 73 sets[""] = "" # settings set by each option 74 setval[""] = "" # value to set (indexed: 'option sets[option]') 75 # for each setting: 76 setting[""] = "" # requires by setting 77 defaults[""] = "" # used for a defaulted value 78 doneset[""] = 1 # marks setting as having been output 79 r[""] = "" # Temporary array 80 81 # For decorating the output file 82 protect = "" 83} 84 85# The output file must be specified before any input: 86out == "" { 87 print "out=output.file must be given on the command line" 88 err = 1 89 exit 1 90} 91 92# The very first line indicates whether we are reading pre-processed 93# input or not, this must come *first* because 'PREPROCESSED' needs 94# to be the very first line in the temporary file. 95pre == -1{ 96 if ($0 == "PREPROCESSED") { 97 pre = 0 98 next 99 } else { 100 pre = 1 101 print "PREPROCESSED" >out 102 # And fall through to continue processing 103 } 104} 105 106# While pre-processing if version is set to "search" look for a version string 107# in the following file. 108pre && version == "search" && version_file == ""{ 109 version_file = FILENAME 110} 111 112pre && version == "search" && version_file != FILENAME{ 113 print "version string not found in", version_file 114 err = 1 115 exit 1 116} 117 118pre && version == "search" && $0 ~ /^ \* libpng version/{ 119 version = substr($0, 4) 120 print "version =", version >out 121 next 122} 123 124pre && FILENAME == version_file{ 125 next 126} 127 128# variable=value 129# Sets the given variable to the given value (the syntax is fairly 130# free form, except for deb (you are expected to understand how to 131# set the debug variable...) 132# 133# This happens before the check on 'pre' below skips most of the 134# rest of the actions, so the variable settings happen during 135# preprocessing but are recorded in the END action too. This 136# allows them to be set on the command line too. 137$0 ~ /^[ ]*version[ ]*=/{ 138 sub(/^[ ]*version[ ]*=[ ]*/, "") 139 version = $0 140 next 141} 142$0 ~ /^[ ]*everything[ =]*off[ ]*$/{ 143 everything = "off" 144 next 145} 146$0 ~ /^[ ]*everything[ =]*on[ ]*$/{ 147 everything = "on" 148 next 149} 150$0 ~ /^[ ]*logunsupported[ =]*0[ ]*$/{ 151 logunsupported = 0 152 next 153} 154$0 ~ /^[ ]*logunsupported[ =]*1[ ]*$/{ 155 logunsupported = 1 156 next 157} 158$1 == "deb" && $2 == "=" && NF == 3{ 159 deb = $3 160 next 161} 162 163# Preprocessing - this just copies the input file with lines 164# that need preprocessing (just chunk at present) expanded 165# The bare "pre" instead of "pre != 0" crashes under Sunos awk 166pre && $1 != "chunk"{ 167 print >out 168 next 169} 170 171# The first characters of the line determine how it is processed, 172# leading spaces are ignored. In general tokens that are not 173# keywords are the names of options. An option 'name' is 174# controlled by the definition of the corresponding macros: 175# 176# PNG_name_SUPPORTED The option is turned on 177# PNG_NO_name 178# PNG_NO_name_SUPPORTED If the first macro is not defined 179# either of these will turn the option off 180# 181# If none of these macros are defined the option is turned on, unless 182# the keyword 'off' is given in a line relating to the option. The 183# keyword 'on' can also be given, but it will be ignored (since it is 184# the default.) 185# 186# In the syntax below a 'name' is indicated by "NAME", other macro 187# values are indicated by "MACRO", as with "NAME" the leading "PNG_" 188# is omitted, but in this case the "NO_" prefix and the "_SUPPORTED" 189# suffix are never used. 190# 191# Each line is introduced by a keyword - the first non-space characters 192# on the line. A line starting with a '#' is a comment - it is totally 193# ignored. Keywords are as follows, a NAME, is simply a macro name 194# without the leading PNG_, PNG_NO_ or the trailing _SUPPORTED. 195 196$1 ~ /^#/ || $0 ~ /^[ ]*$/{ 197 next 198} 199 200# com <comment> 201# The whole line is placed in the output file as a comment with 202# the preceding 'com' removed 203$1 == "com"{ 204 if (NF > 1) { 205 # sub(/^[ ]*com[ ]*/, "") 206 $1 = "" 207 print comment $0, cend >out 208 } else 209 print start end >out 210 next 211} 212 213# version 214# Inserts a version comment 215$1 == "version" && NF == 1{ 216 if (version == "") { 217 print "ERROR: no version string set" 218 err = 1 # prevent END{} running 219 exit 1 220 } 221 222 print comment, version, cend >out 223 next 224} 225 226# file output input protect 227# Informational: the official name of the input file (without 228# make generated local directories), the official name of the 229# output file and, if required, a name to use in a protection 230# macro for the contents. 231$1 == "file" && NF >= 2{ 232 print comment, $2, cend >out 233 print comment, "Machine generated file: DO NOT EDIT", cend >out 234 if (NF >= 3) 235 print comment, "Derived from:", $3, cend >out 236 protect = $4 237 if (protect != "") { 238 print start "#ifndef", protect end >out 239 print start "#define", protect end >out 240 } 241 next 242} 243 244# option NAME ( (requires|enables|if) NAME* | on | off | disabled | 245# sets SETTING VALUE+ )* 246# 247# Declares an option 'NAME' and describes its default setting (disabled) 248# and its relationship to other options. The option is disabled 249# unless *all* the options listed after 'requires' are set and at 250# least one of the options listed after 'if' is set. If the 251# option is set then it turns on all the options listed after 'enables'. 252# 253# Note that "enables" takes priority over the required/if/disabled/off 254# setting of the target option. 255# 256# The definition file may list an option as 'disabled': off by default, 257# otherwise the option is enabled: on by default. A later (and it must 258# be later) entry may turn an option on or off explicitly. 259 260$1 == "option" && NF >= 2{ 261 opt = $2 262 sub(/,$/,"",opt) 263 onoff = option[opt] # records current (and the default is "", enabled) 264 key = "" 265 istart = 3 266 do { 267 if (istart == 1) { # continuation line 268 val = getline 269 270 if (val != 1) { # error reading it 271 if (val == 0) 272 print "option", opt ": ERROR: missing continuation line" 273 else 274 print "option", opt ": ERROR: error reading continuation line" 275 276 # This is a hard error 277 err = 1 # prevent END{} running 278 exit 1 279 } 280 } 281 282 for (i=istart; i<=NF; ++i) { 283 val=$(i) 284 sub(/,$/,"",val) 285 if (val == "on" || val == "off" || val == "disabled" || val =="enabled") { 286 key = "" 287 if (onoff != val) { 288 # on or off can zap disabled or enabled: 289 if (onoff == "" || (onoff == "disabled" || onoff == "enabled") && 290 (val == "on" || val == "off")) { 291 # It's easy to mis-spell the option when turning it 292 # on or off, so warn about it here: 293 if (onoff == "" && (val == "on" || val == "off")) { 294 print "option", opt ": ERROR: turning unrecognized option", val 295 # For the moment error out - it is safer 296 err = 1 # prevent END{} running 297 exit 1 298 } 299 onoff = val 300 } else { 301 # Print a message, otherwise the error 302 # below is incomprehensible 303 print "option", opt ": currently", onoff ": attempt to turn", val 304 break 305 } 306 } 307 } else if (val == "requires" || val == "if" || val == "enables" || val =="sets") { 308 key = val 309 } else if (key == "requires") { 310 requires[opt] = requires[opt] " " val 311 } else if (key == "if") { 312 iffs[opt] = iffs[opt] " " val 313 } else if (key == "enables") { 314 enabledby[val] = enabledby[val] " " opt 315 } else if (key == "sets") { 316 sets[opt] = sets[opt] " " val 317 key = "setval" 318 set = val 319 } else if (key == "setval") { 320 setval[opt " " set] = setval[opt " " set] " " val 321 } else 322 break # bad line format 323 } 324 325 istart = 1 326 } while (i > NF && $0 ~ /,$/) 327 328 if (i > NF) { 329 # Set the option, defaulting to 'enabled' 330 if (onoff == "") onoff = "enabled" 331 option[opt] = onoff 332 next 333 } 334 # Else fall through to the error handler 335} 336 337# chunk NAME [requires OPT] [enables LIST] [on|off|disabled] 338# Expands to the 'option' settings appropriate to the reading and 339# writing of an ancilliary PNG chunk 'NAME': 340# 341# option READ_NAME requires READ_ANCILLARY_CHUNKS [READ_OPT] 342# option READ_NAME enables NAME LIST 343# [option READ_NAME off] 344# option WRITE_NAME requires WRITE_ANCILLARY_CHUNKS [WRITE_OPT] 345# option WRITE_NAME enables NAME LIST 346# [option WRITE_NAME off] 347 348pre != 0 && $1 == "chunk" && NF >= 2{ 349 # 'chunk' is handled on the first pass by writing appropriate 350 # 'option' lines into the intermediate file. 351 opt = $2 352 sub(/,$/,"",opt) 353 onoff = "" 354 reqread = "" 355 reqwrite = "" 356 enables = "" 357 req = 0 358 istart = 3 359 do { 360 if (istart == 1) { # continuation line 361 val = getline 362 363 if (val != 1) { # error reading it 364 if (val == 0) 365 print "chunk", opt ": ERROR: missing continuation line" 366 else 367 print "chunk", opt ": ERROR: error reading continuation line" 368 369 # This is a hard error 370 err = 1 # prevent END{} running 371 exit 1 372 } 373 } 374 375 # read the keywords/additional OPTS 376 for (i=istart; i<=NF; ++i) { 377 val = $(i) 378 sub(/,$/,"",val) 379 if (val == "on" || val == "off" || val == "disabled") { 380 if (onoff != val) { 381 if (onoff == "") 382 onoff = val 383 else 384 break # on/off conflict 385 } 386 req = 0 387 } else if (val == "requires") 388 req = 1 389 else if (val == "enables") 390 req = 2 391 else if (req == 1){ 392 reqread = reqread " READ_" val 393 reqwrite = reqwrite " WRITE_" val 394 } else if (req == 2) 395 enables = enables " " val 396 else 397 break # bad line: handled below 398 } 399 400 istart = 1 401 } while (i > NF && $0 ~ /,$/) 402 403 if (i > NF) { 404 # Output new 'option' lines to the intermediate file (out) 405 print "option READ_" opt, "requires READ_ANCILLARY_CHUNKS" reqread, "enables", opt enables , onoff >out 406 print "option WRITE_" opt, "requires WRITE_ANCILLARY_CHUNKS" reqwrite, "enables", opt enables, onoff >out 407 next 408 } 409 # Else hit the error handler below - bad line format! 410} 411 412# setting MACRO ( requires MACRO* )* [ default VALUE ] 413# Behaves in a similar way to 'option' without looking for NO_ or 414# _SUPPORTED; the macro is enabled if it is defined so long as all 415# the 'requires' macros are also defined. The definitions may be 416# empty, an error will be issued if the 'requires' macros are 417# *not* defined. If given the 'default' value is used if the 418# macro is not defined. The default value will be re-tokenised. 419# (BTW: this is somewhat restrictive, it mainly exists for the 420# support of non-standard configurations and numeric parameters, 421# see the uses in scripts/options.dat 422 423$1 == "setting" && (NF == 2 || NF >= 3 && ($3 == "requires" || $3 == "default")){ 424 reqs = "" 425 deflt = "" 426 isdef = 0 427 key = "" 428 for (i=3; i<=NF; ++i) 429 if ($(i) == "requires" || $(i) == "default") { 430 key = $(i) 431 if (key == "default") isdef = 1 432 } else if (key == "requires") 433 reqs = reqs " " $(i) 434 else if (key == "default") 435 deflt = deflt " " $(i) 436 else 437 break # Format error, handled below 438 439 setting[$2] = reqs 440 # NOTE: this overwrites a previous value silently 441 if (isdef && deflt == "") 442 deflt = " " # as a flag to force output 443 defaults[$2] = deflt 444 next 445} 446 447# The order of the dependency lines (option, chunk, setting) is irrelevant 448# - the 'enables', 'requires' and 'if' settings will be used to determine 449# the correct order in the output and the final values in pnglibconf.h are 450# not order dependent. 'requires' and 'if' entries take precedence over 451# 'enables' from other options; if an option requires another option it 452# won't be set regardless of any options that enable it unless the other 453# option is also enabled. 454# 455# Similarly 'enables' trumps a NO_ definition in CFLAGS or pngusr.h 456# 457# For simplicity cycles in the definitions are regarded as errors, 458# even if they are not ambiguous. 459# A given NAME can be specified in as many 'option' lines as required, the 460# definitions are additive. 461 462# For backwards compatibility equivalent macros may be listed thus: 463# 464# = [NO_]NAME MACRO 465# Makes -DMACRO equivalent to -DPNG_NO_NAME or -DPNG_NAME_SUPPORTED 466# as appropriate. 467# 468# The definition is injected into the C compiler input when encountered 469# in the second pass (so all these definitions appear *after* the @ 470# lines!) 471# 472# 'NAME' is as above, but 'MACRO' is the full text of the equivalent 473# old, deprecated, macro. 474 475$1 == "=" && NF == 3{ 476 print "#ifdef PNG_" $3 >out 477 if ($2 ~ /^NO_/) 478 print "# define PNG_" $2 >out 479 else 480 print "# define PNG_" $2 "_SUPPORTED" >out 481 print "#endif" >out 482 next 483} 484 485# Lines may be injected into the C compiler input by preceding them 486# with an "@" character. The line is copied with just the leading 487# @ removed. 488 489$1 ~ /^@/{ 490 # sub(/^[ ]*@/, "") 491 $1 = substr($1, 2) 492 print >out 493 next 494} 495 496# Check for unrecognized lines, because of the preprocessing chunk 497# format errors will be detected on the first pass independent of 498# any other format errors. 499{ 500 print "options.awk: bad line (" NR "):", $0 501 err = 1 # prevent END{} running 502 exit 1 503} 504 505# For checking purposes names that start with "ok_" or "fail_" are 506# not output to pnglibconf.h and must be either enabled or disabled 507# respectively for the build to succeed. This allows interdependencies 508# between options of the form "at least one of" or "at most one of" 509# to be checked. For example: 510# 511# option FLOATING_POINT enables ok_math 512# option FIXED_POINT enables ok_math 513# This ensures that at least one of FLOATING_POINT and FIXED_POINT 514# must be set for the build to succeed. 515# 516# option fail_math requires FLOATING_POINT FIXED_POINT 517# This means the build will fail if *both* FLOATING_POINT and 518# FIXED_POINT are set (this is an example; in fact both are allowed.) 519# 520# If all these options were given the build would require exactly one 521# of the names to be enabled. 522 523END{ 524 # END{} gets run on an exit (a traditional awk feature) 525 if (err) exit 1 526 527 if (pre) { 528 # Record the final value of the variables 529 print "deb =", deb >out 530 if (everything != "") { 531 print "everything =", everything >out 532 } 533 print "logunsupported =", logunsupported >out 534 exit 0 535 } 536 537 # Do the options first (allowing options to set settings). The dependency 538 # tree is thus: 539 # 540 # name > name 541 # name requires name 542 # name if name 543 # name enabledby name 544 # 545 # First build a list 'tree' by option of all the things on which 546 # it depends. 547 print "" >out 548 print "/* OPTIONS */" >out 549 print comment, "options", cend >out 550 for (opt in enabledby) tree[opt] = 1 # may not be explicit options 551 for (opt in option) if (opt != "") { 552 o = option[opt] 553 # option should always be one of the following values 554 if (o != "on" && o != "off" && o != "disabled" && o != "enabled") { 555 print "internal option error (" o ")" 556 exit 1 557 } 558 tree[opt] = "" # so unlisted options marked 559 } 560 for (opt in tree) if (opt != "") { 561 if (tree[opt] == 1) { 562 tree[opt] = "" 563 if (option[opt] != "") { 564 print "internal error (1)" 565 exit 1 566 } 567 # Macros only listed in 'enables' remain off unless 568 # one of the enabling macros is on. 569 option[opt] = "disabled" 570 } 571 572 split("", list) # clear 'list' 573 # Now add every requires, iffs or enabledby entry to 'list' 574 # so that we can add a unique list of requirements to tree[i] 575 split(requires[opt] iffs[opt] enabledby[opt], r) 576 for (i in r) list[r[i]] = 1 577 for (i in list) tree[opt] = tree[opt] " " i 578 } 579 580 # print the tree for extreme debugging 581 if (deb > 2) for (i in tree) if (i != "") print i, "depends-on" tree[i] 582 583 # Ok, now check all options marked explicitly 'on' or 'off': 584 # 585 # If an option[opt] is 'on' then turn on all requires[opt] 586 # If an option[opt] is 'off' then turn off all enabledby[opt] 587 # 588 # Error out if we have to turn 'on' to an 'off' option or vice versa. 589 npending = 0 590 for (opt in option) if (opt != "") { 591 if (option[opt] == "on" || option[opt] == "off") { 592 pending[++npending] = opt 593 } 594 } 595 596 err = 0 # set on error 597 while (npending > 0) { 598 opt = pending[npending--] 599 if (option[opt] == "on") { 600 nreqs = split(requires[opt], r) 601 for (j=1; j<=nreqs; ++j) { 602 if (option[r[j]] == "off") { 603 print "option", opt, "turned on, but requirement", r[j], "is turned off" 604 err = 1 605 } else if (option[r[j]] != "on") { 606 option[r[j]] = "on" 607 pending[++npending] = r[j] 608 } 609 } 610 } else { 611 if (option[opt] != "off") { 612 print "internal error (2)" 613 exit 1 614 } 615 nreqs = split(enabledby[opt], r) 616 for (j=1; j<=nreqs; ++j) { 617 if (option[r[j]] == "on") { 618 print "option", opt, "turned off, but enabled by", r[j], "which is turned on" 619 err = 1 620 } else if (option[r[j]] != "off") { 621 option[r[j]] = "off" 622 pending[++npending] = r[j] 623 } 624 } 625 } 626 } 627 if (err) exit 1 628 629 # Sort options: 630 print "PNG_DFN_START_SORT 2" >out 631 632 # option[i] is now the complete list of all the tokens we may 633 # need to output, go through it as above, depth first. 634 finished = 0 635 while (!finished) { 636 finished = 1 637 movement = 0 # done nothing 638 for (i in option) if (!done[i]) { 639 nreqs = split(tree[i], r) 640 if (nreqs > 0) { 641 for (j=1; j<=nreqs; ++j) if (!done[r[j]]) { 642 break 643 } 644 if (j<=nreqs) { 645 finished = 0 646 continue # next option 647 } 648 } 649 650 # All the requirements have been processed, output 651 # this option. An option is _SUPPORTED if: 652 # 653 # all 'requires' are _SUPPORTED AND 654 # at least one of the 'if' options are _SUPPORTED AND 655 # EITHER: 656 # The name is _SUPPORTED (on the command line) 657 # OR: 658 # an 'enabledby' is _SUPPORTED 659 # OR: 660 # NO_name is not defined AND 661 # the option is not disabled; an option is disabled if: 662 # option == off 663 # option == disabled && everything != on 664 # option == "" && everything == off 665 if (deb) print "option", i 666 print "" >out 667 print "/* option:", i, option[i] >out 668 print " * requires: " requires[i] >out 669 print " * if: " iffs[i] >out 670 print " * enabled-by:" enabledby[i] >out 671 print " * sets: " sets[i], "*/" >out 672 print "#undef PNG_on" >out 673 print "#define PNG_on 1" >out 674 675 # requires 676 nreqs = split(requires[i], r) 677 for (j=1; j<=nreqs; ++j) { 678 print "#ifndef PNG_" r[j] "_SUPPORTED" >out 679 print "# undef PNG_on /*!" r[j] "*/" >out 680 # This error appears in the final output if something 681 # was switched 'on' but the processing above to force 682 # the requires did not work 683 if (option[i] == "on") { 684 print error, i, "requires", r[j] end >out 685 } 686 print "#endif" >out 687 } 688 689 # if 690 have_ifs = 0 691 nreqs = split(iffs[i], r) 692 print "#undef PNG_no_if" >out 693 if (nreqs > 0) { 694 have_ifs = 1 695 print "/* if" iffs[i], "*/" >out 696 print "#define PNG_no_if 1" >out 697 for (j=1; j<=nreqs; ++j) { 698 print "#ifdef PNG_" r[j] "_SUPPORTED" >out 699 print "# undef PNG_no_if /*" r[j] "*/" >out 700 print "#endif" >out 701 } 702 print "#ifdef PNG_no_if /*missing if*/" >out 703 print "# undef PNG_on" >out 704 # There is no checking above for this, because we 705 # don't know which 'if' to choose, so whine about 706 # it here: 707 if (option[i] == "on") { 708 print error, i, "needs one of:", iffs[i] end >out 709 } 710 print "#endif" >out 711 } 712 713 print "#ifdef PNG_on /*requires, if*/" >out 714 # enables 715 print "# undef PNG_not_enabled" >out 716 print "# define PNG_not_enabled 1" >out 717 print " /* enabled by" enabledby[i], "*/" >out 718 nreqs = split(enabledby[i], r) 719 for (j=1; j<=nreqs; ++j) { 720 print "#ifdef PNG_" r[j] "_SUPPORTED" >out 721 print "# undef PNG_not_enabled /*" r[j] "*/" >out 722 # Oops, probably not intended (should be factored 723 # out by the checks above). 724 if (option[i] == "off") { 725 print error, i, "enabled by:", r[j] end >out 726 } 727 print "#endif" >out 728 } 729 730 print "# ifndef PNG_" i "_SUPPORTED /*!command line*/" >out 731 print "# ifdef PNG_not_enabled /*!enabled*/" >out 732 # 'have_ifs' here means that everything = "off" still allows an 'if' on 733 # an otherwise enabled option to turn it on; otherwise the 'if' 734 # handling is effectively disabled by 'everything = off' 735 if (option[i] == "off" || option[i] == "disabled" && everything != "on" || option[i] == "enabled" && everything == "off" && !have_ifs) { 736 print "# undef PNG_on /*default off*/" >out 737 } else { 738 print "# ifdef PNG_NO_" i >out 739 print "# undef PNG_on /*turned off*/" >out 740 print "# endif" >out 741 print "# ifdef PNG_NO_" i "_SUPPORTED" >out 742 print "# undef PNG_on /*turned off*/" >out 743 print "# endif" >out 744 } 745 print "# endif /*!enabled*/" >out 746 print "# ifdef PNG_on" >out 747 # The _SUPPORTED macro must be defined so that dependent 748 # options output later work. 749 print "# define PNG_" i "_SUPPORTED" >out 750 print "# endif" >out 751 print "# endif /*!command line*/" >out 752 # If PNG_on is still set the option should be defined in 753 # pnglibconf.h 754 print "# ifdef PNG_on" >out 755 if (i ~ /^fail_/) { 756 print error, i, "is on: enabled by:" iffs[i] enabledby[i] ", requires" requires[i] end >out 757 } else if (i !~ /^ok_/) { 758 print def i sup >out 759 # Supported option, set required settings 760 nreqs = split(sets[i], r) 761 for (j=1; j<=nreqs; ++j) { 762 print "# ifdef PNG_set_" r[j] >out 763 # Some other option has already set a value: 764 print error, i, "sets", r[j] ": duplicate setting" end >out 765 print error, " previous value: " end "PNG_set_" r[j] >out 766 print "# else" >out 767 # Else set the default: note that this won't accept arbitrary 768 # values, the setval string must be acceptable to all the C 769 # compilers we use. That means it must be VERY simple; a number, 770 # a name or a string. 771 print "# define PNG_set_" r[j], setval[i " " r[j]] >out 772 print "# endif" >out 773 } 774 } 775 print "# endif /* definition */" >out 776 print "#endif /*requires, if*/" >out 777 if (logunsupported || i ~ /^ok_/) { 778 print "#ifndef PNG_on" >out 779 if (logunsupported) { 780 print und i une >out 781 } 782 if (i ~ /^ok_/) { 783 print error, i, "not enabled: requires:" requires[i] ", enabled by:" iffs[i] enabledby[i] end >out 784 } 785 print "#endif" >out 786 } 787 788 done[i] = 1 789 ++movement 790 } 791 792 if (!finished && !movement) { 793 print "option: loop or missing option in dependency tree, cannot process:" 794 for (i in option) if (!done[i]) { 795 print " option", i, "depends on" tree[i], "needs:" 796 nreqs = split(tree[i], r) 797 if (nreqs > 0) for (j=1; j<=nreqs; ++j) if (!done[r[j]]) { 798 print " " r[j] 799 } 800 } 801 exit 1 802 } 803 } 804 print "PNG_DFN_END_SORT" >out 805 print comment, "end of options", cend >out 806 807 # Do the 'setting' values second, the algorithm the standard 808 # tree walk (O(1)) done in an O(2) while/for loop; interations 809 # settings x depth, outputing the deepest required macros 810 # first. 811 print "" >out 812 print "/* SETTINGS */" >out 813 print comment, "settings", cend >out 814 # Sort (in dfn.awk) on field 2, the setting name 815 print "PNG_DFN_START_SORT 2" >out 816 finished = 0 817 while (!finished) { 818 finished = 1 819 movement = 0 # done nothing 820 for (i in setting) if (!doneset[i]) { 821 nreqs = split(setting[i], r) 822 if (nreqs > 0) { 823 # By default assume the requires values are options, but if there 824 # is no option with that name check for a setting 825 for (j=1; j<=nreqs; ++j) if (option[r[j]] == "" && !doneset[r[j]]) { 826 break 827 } 828 if (j<=nreqs) { 829 finished = 0 830 continue # try a different setting 831 } 832 } 833 834 # All the requirements have been processed, output 835 # this setting. 836 if (deb) print "setting", i 837 deflt = defaults[i] 838 # Remove any spurious trailing spaces 839 sub(/ *$/,"",deflt) 840 # A leading @ means leave it unquoted so the preprocessor 841 # can substitute the build time value 842 if (deflt ~ /^ @/) 843 deflt = " " subs substr(deflt, 3) sube 844 print "" >out 845 print "/* setting: ", i >out 846 print " * requires:" setting[i] >out 847 print " * default: ", defaults[i] deflt, "*/" >out 848 for (j=1; j<=nreqs; ++j) { 849 if (option[r[j]] != "") 850 print "#ifndef PNG_" r[j] "_SUPPORTED" >out 851 else 852 print "#ifndef PNG_" r[j] >out 853 print error, i, "requires", r[j] end >out 854 print "# endif" >out 855 } 856 # The precedence is: 857 # 858 # 1) External definition; trumps: 859 # 2) Option 'sets' value; trumps: 860 # 3) Setting 'default' 861 # 862 print "#ifdef PNG_" i >out 863 # PNG_<i> is defined, so substitute the value: 864 print def i, subs "PNG_" i sube end >out 865 print "#else /* use default */" >out 866 print "# ifdef PNG_set_" i >out 867 # Value from an option 'sets' argument 868 print def i, subs "PNG_set_" i sube end >out 869 # This is so that subsequent tests on the setting work: 870 print "# define PNG_" i, "1" >out 871 if (defaults[i] != "") { 872 print "# else /*default*/" >out 873 print def i deflt end >out 874 print "# define PNG_" i, "1" >out 875 } 876 print "# endif /* defaults */" >out 877 print "#endif /* setting", i, "*/" >out 878 879 doneset[i] = 1 880 ++movement 881 } 882 883 if (!finished && !movement) { 884 print "setting: loop or missing setting in 'requires', cannot process:" 885 for (i in setting) if (!doneset[i]) { 886 print " setting", i, "requires" setting[i] 887 } 888 exit 1 889 } 890 } 891 print "PNG_DFN_END_SORT" >out 892 print comment, "end of settings", cend >out 893 894 # Regular end - everything looks ok 895 if (protect != "") { 896 print start "#endif", "/*", protect, "*/" end >out 897 } 898} 899