| /external/u-boot/board/freescale/p1010rdb/ |
| D | README.P1010RDB-PB | 67 SW4[1:4]= 1010
73 SW4[1:4]= 1111 and SW3[3:4]= 00 for 16bit NOR boot
74 SW4[1:4]= 1010 and SW3[3:4]= 01 for 8bit NAND boot
75 SW4[1:4]= 0110 and SW3[3:4]= 00 for SPI boot
76 SW4[1:4]= 0111 and SW3[3:4]= 10 for SD boot
153 set SW1[8]=0, SW4[1:4]= 1111 and SW3[3:4]= 00, then power on the board
157 set SW1[8]=1, SW4[1:4]= 1111 and SW3[3:4]= 00, then power on the board
162 Set SW4[1:4]= 1010 and SW3[3:4]= 01, then power on the board
168 set SW4[1:4]= 0110 and SW3[3:4]= 00, then power on the board
175 set SW4[1:4]= 0111 and SW3[3:4]= 10, then power on the board
|
| D | README.P1010RDB-PA | 82 SW4[1:4]= 1111 and SW6[4]=0 for boot from 16bit NOR flash
83 SW4[1:4]= 1000 and SW6[4]=1 for boot from 8bit NAND flash
84 SW4[1:4]= 0110 and SW6[4]=0 for boot from SPI flash
111 3. Check SW4[1:4]= 1111 and SW6[4]=0, then power on.
146 3. Check SW4[1:4]= 1000 and SW6[4]=1, then power on.
165 3. Check SW4[1:4]= 0110 and SW6[4]=0, then power on.
|
| /external/u-boot/board/freescale/ls1088a/ |
| D | README | 19 SW4 1001 0011
26 SW4 1001 0011
33 SW4 1001 0011
94 SW4 0010 0000
|
| /external/u-boot/board/freescale/common/ |
| D | mc34vr500.c | 30 if (sw > SW4) { in mc34vr500_get_sw_volt()
69 if (sw > SW4 || sw_volt < 625) in mc34vr500_set_sw_volt()
|
| /external/u-boot/board/freescale/ls1046ardb/ |
| D | ls1046ardb.c | 111 return mc34vr500_get_sw_volt(SW4); in get_serdes_volt()
116 return mc34vr500_set_sw_volt(SW4, svdd); in set_serdes_volt()
|
| /external/u-boot/board/freescale/mpc8641hpcn/ |
| D | README | 48 SW4(1-2) = 11 CONFIG_SYS_HOSTMODE = 11 :: both prots host/root
49 SW4(3-4) = 11 CONFIG_SYS_BOOTSEQ = 11 :: no boot seq
50 SW4(5-8) = 0011 CONFIG_SYS_IOPORT = 0011 :: both PEX
|
| /external/libaom/libaom/aom_dsp/mips/ |
| D | intrapred_msa.c | 28 SW4(src_data, src_data, src_data, src_data, dst, dst_stride); in intra_predict_vert_4x4_msa()
82 SW4(out0, out1, out2, out3, dst, dst_stride); in intra_predict_horiz_4x4_msa()
174 SW4(val0, val0, val0, val0, dst, dst_stride); in intra_predict_dc_4x4_msa()
192 SW4(val0, val0, val0, val0, dst, dst_stride); in intra_predict_dc_tl_4x4_msa()
201 SW4(out, out, out, out, dst, dst_stride); in intra_predict_128dc_4x4_msa()
|
| D | macros_msa.h | 265 #define SW4(in0, in1, in2, in3, pdst, stride) \ macro
534 SW4(out0_m, out1_m, out2_m, out3_m, pblk_4x4_m, stride); \
|
| /external/u-boot/board/freescale/mpc837xemds/ |
| D | README | 17 SW4[8] is the bit labeled 8 on Switch 4.
27 SW4[1-8]= 0000_0110 (core PLL setting)
|
| /external/u-boot/doc/ |
| D | README.mpc85xxcds | 135 SW4=10001000
160 SW4=11111110
174 SW4=11110011
|
| /external/u-boot/include/power/ |
| D | mc34vr500_pmic.h | 168 SW4, enumerator
|
| /external/u-boot/board/freescale/mpc832xemds/ |
| D | README | 18 SW4[8] is the bit labeled 8 on Switch 4.
29 SW4[1-8]= 0001_0010 (Flash boot on local bus, system PLL setting)
|
| /external/libvpx/libvpx/vpx_dsp/mips/ |
| D | intrapred_msa.c | 26 SW4(src_data, src_data, src_data, src_data, dst, dst_stride); in intra_predict_vert_4x4_msa()
80 SW4(out0, out1, out2, out3, dst, dst_stride); in intra_predict_horiz_4x4_msa()
172 SW4(val0, val0, val0, val0, dst, dst_stride); in intra_predict_dc_4x4_msa()
190 SW4(val0, val0, val0, val0, dst, dst_stride); in intra_predict_dc_tl_4x4_msa()
199 SW4(out, out, out, out, dst, dst_stride); in intra_predict_128dc_4x4_msa()
|
| D | vpx_convolve_avg_msa.c | 35 SW4(out0, out1, out2, out3, dst, dst_stride); in avg_width4_msa()
|
| D | macros_msa.h | 205 #define SW4(in0, in1, in2, in3, pdst, stride) \ macro
406 SW4(out0_m, out1_m, out2_m, out3_m, pblk_4x4_m, stride); \
|
| /external/python/cpython2/Lib/plat-irix6/ |
| D | DEVICE.py | 198 SW4 = 115 variable
|
| /external/python/cpython2/Lib/plat-irix5/ |
| D | DEVICE.py | 198 SW4 = 115 variable
|
| /external/u-boot/board/freescale/mx35pdk/ |
| D | README | 77 (SW1-SW2) and on the DEBUG board (SW4-SW10).
|
| /external/webp/src/dsp/ |
| D | enc_msa.c | 272 SW4(out, out, out, out, dst, BPS); in VE4()
293 SW4(dc, dc, dc, dc, dst, BPS); in DC4()
313 SW4(val3, val2, val1, val0, dst, BPS); in RD4()
333 SW4(val0, val1, val2, val3, dst, BPS); in LD4()
|
| D | dec_msa.c | 686 SW4(dc, dc, dc, dc, dst, BPS); in DC4()
721 SW4(out, out, out, out, dst, BPS); in VE4()
749 SW4(val0, val1, val2, val3, dst, BPS); in RD4()
773 SW4(val0, val1, val2, val3, dst, BPS); in LD4()
|
| D | msa_macro.h | 168 #define SW4(in0, in1, in2, in3, pdst, stride) do { \ macro
400 SW4(out0_m, out1_m, out2_m, out3_m, pblk_4x4_m, stride); \
|
| /external/u-boot/arch/arm/dts/ |
| D | r8a7794-silk.dts | 59 label = "SW4";
|
| /external/u-boot/board/sbc8548/ |
| D | README | 237 SW4 settings are readable from the EPLD and are currently not used for
|
| /external/u-boot/board/freescale/t102xqds/ |
| D | README | 195 SRDS_PRTCL_S1 SD1_REF_CLK1 SD1_REF_CLK2 SW4[1:4]
|
| /external/libvpx/libvpx/vp8/common/mips/msa/ |
| D | vp8_macros_msa.h | 238 #define SW4(in0, in1, in2, in3, pdst, stride) \ macro
438 SW4(out0_m, out1_m, out2_m, out3_m, pblk_4x4_m, stride); \
|