| /external/autotest/client/site_tests/cellular_ActivateLTE/ |
| D | cellular_ActivateLTE.py | 43 modem = self.test.pseudomm.wait_for_modem(timeout_seconds=LONG_TIMEOUT)
44 modem.iface_properties.Set(mm1_constants.I_MODEM,
147 modem = self.test.pseudomm.get_modem()
148 modem.iface_properties.Set(mm1_constants.I_MODEM,
174 modem = self.pseudomm.get_modem()
175 props = modem.properties(mm1_constants.I_MODEM)
187 modem = self.pseudomm.get_modem()
188 if modem is None:
190 modem.iface_properties.Set(
196 def GetResetCalled(self, modem): argument
[all …]
|
| /external/autotest/server/site_tests/cellular_StaleModemReboot/ |
| D | control | 9 PURPOSE = "Verify modem is available for testing."
11 This test will fail if either there is no response to modem status command or
12 modem is in a non testable state after two or more tries.
22 Tests that a cellular modem is available for testing.
24 The test attempts to detect the modem state by running the modem status
26 original modem state and reboots the DUT regardless of what state the modem
27 is in. After the reboot, it tries to get the modem state again and if the
28 modem does not respond or the state is one of the following as listed below,
32 REBOOT STATES (If modem is in any of these states, DUT is cold rebooted using
44 WAIT DELAY STATES (Waits for a maximum of 120 seconds for the modem to get
[all …]
|
| /external/autotest/client/site_tests/cellular_Smoke/ |
| D | control.huawei-me936 | 7 PURPOSE = "Verify 3G modem can connect to the network."
10 - 3G modem fails to connect to network
11 - the modem is not left in a working state
18 DEPENDENCIES = "modem:huawei-me936"
20 Tests that 3G modem can connect to the network
23 a 3G modem is plugged in and has a signal. The test then
24 disconnects from the network, and verifies that the modem still
25 responds to modem manager DBUS API calls. It repeats the
|
| D | control.huawei-e303 | 7 PURPOSE = "Verify 3G modem can connect to the network."
10 - 3G modem fails to connect to network
11 - the modem is not left in a working state
18 DEPENDENCIES = "modem:huawei-e303"
20 Tests that 3G modem can connect to the network
23 a 3G modem is plugged in and has a signal. The test then
24 disconnects from the network, and verifies that the modem still
25 responds to modem manager DBUS API calls. It repeats the
|
| D | control.altair-messi_v | 7 PURPOSE = "Verify 3G modem can connect to the network."
10 - 3G modem fails to connect to network
11 - the modem is not left in a working state
18 DEPENDENCIES = "modem:altair-messi_v"
20 Tests that 3G modem can connect to the network
23 a 3G modem is plugged in and has a signal. The test then
24 disconnects from the network, and verifies that the modem still
25 responds to modem manager DBUS API calls. It repeats the
|
| D | control.zte-mf190 | 7 PURPOSE = "Verify 3G modem can connect to the network."
10 - 3G modem fails to connect to network
11 - the modem is not left in a working state
18 DEPENDENCIES = "modem:zte-mf190"
20 Tests that 3G modem can connect to the network
23 a 3G modem is plugged in and has a signal. The test then
24 disconnects from the network, and verifies that the modem still
25 responds to modem manager DBUS API calls. It repeats the
|
| D | control.altair-alt3100 | 7 PURPOSE = "Verify 3G modem can connect to the network."
10 - 3G modem fails to connect to network
11 - the modem is not left in a working state
18 DEPENDENCIES = "modem:altair-alt3100"
20 Tests that 3G modem can connect to the network
23 a 3G modem is plugged in and has a signal. The test then
24 disconnects from the network, and verifies that the modem still
25 responds to modem manager DBUS API calls. It repeats the
|
| D | control.novatel-e362 | 7 PURPOSE = "Verify 3G modem can connect to the network."
10 - 3G modem fails to connect to network
11 - the modem is not left in a working state
18 DEPENDENCIES = "modem:novatel-e362"
20 Tests that 3G modem can connect to the network
23 a 3G modem is plugged in and has a signal. The test then
24 disconnects from the network, and verifies that the modem still
25 responds to modem manager DBUS API calls. It repeats the
|
| D | control.gobi3k | 7 PURPOSE = "Verify 3G modem can connect to the network."
10 - 3G modem fails to connect to network
11 - the modem is not left in a working state
18 DEPENDENCIES = "modem:gobi3k"
25 Tests that 3G modem can connect to the network
28 a 3G modem is plugged in and has a signal. The test then
29 disconnects from the network, and verifies that the modem still
30 responds to modem manager DBUS API calls. It repeats the
|
| D | control.huawei-mu736 | 7 PURPOSE = "Verify 3G modem can connect to the network."
10 - 3G modem fails to connect to network
11 - the modem is not left in a working state
18 DEPENDENCIES = "modem:huawei-mu736"
25 Tests that 3G modem can connect to the network
28 a 3G modem is plugged in and has a signal. The test then
29 disconnects from the network, and verifies that the modem still
30 responds to modem manager DBUS API calls. It repeats the
|
| D | control.fibocom-l850gl | 7 PURPOSE = "Verify 3G modem can connect to the network."
10 - 3G modem fails to connect to network
11 - the modem is not left in a working state
18 DEPENDENCIES = "modem:fibocom-l850gl"
25 Tests that 3G modem can connect to the network
28 a 3G modem is plugged in and has a signal. The test then
29 disconnects from the network, and verifies that the modem still
30 responds to modem manager DBUS API calls. It repeats the
|
| D | control | 7 PURPOSE = "Verify 3G modem can connect to the network."
10 - 3G modem fails to connect to network
11 - the modem is not left in a working state
19 Tests that 3G modem can connect to the network
22 a 3G modem is plugged in and has a signal. The test then
23 disconnects from the network, and verifies that the modem still
24 responds to modem manager DBUS API calls. It repeats the
|
| D | control.pseudomodem | 7 PURPOSE = "Verify 3G modem can connect to the network."
10 - 3G modem fails to connect to network
11 - the modem is not left in a working state
19 Tests that 3G modem can connect to the network
22 disconnects from the network, and verifies that the modem still
23 responds to modem manager DBUS API calls. It repeats the
|
| /external/autotest/client/site_tests/cellular_ModemControl/ |
| D | cellular_ModemControl.py | 58 def __init__(self, modem, slow_connect): argument
59 self.modem = modem
63 self.modem.Enable(True)
66 self.modem.Enable(False)
70 self.modem.Connect(simple_connect_props)
82 self.modem.Disconnect()
169 def CompareModemPowerState(self, modem, expected_state): argument
171 return modem.IsEnabled() == expected_state
204 lambda: not self.test_env.modem.IsConnectingOrDisconnecting(),
218 lambda: self.CompareModemPowerState(self.test_env.modem, False),
[all …]
|
| D | control.pseudomodem | 7 PURPOSE = "Verify commands sent to a modem manager are reflected in shill."
9 This test will fail if modem manager state differs from shill state.
21 ensure that the modem state is always properly reflected in shill --
22 even if the commands are sent to the modem manager instead of shill.
23 Uses a pseudo modem to simulate modem manager so that this test can
|
| /external/autotest/client/site_tests/cellular_ActivateCDMA/ |
| D | cellular_ActivateCDMA.py | 52 modem = self.pseudomm.get_modem()
53 return modem.properties(mm1_constants.I_MODEM_CDMA)['ActivationState']
171 modem = self.pseudomm.get_modem()
173 lambda: (modem.properties(I_ACTIVATION_TEST)['ActivateCount'] ==
204 modem = pm_proxy.PseudoMMProxy.get_proxy().get_modem()
205 modem.wait_for_states([expected_state], timeout_seconds=timeout)
235 modem = self.test_env.shill.find_cellular_device_object()
236 self.test_env.shill.reset_modem(modem)
|
| /external/autotest/client/site_tests/cellular_GobiSwitchCarrier/ |
| D | cellular_GobiSwitchCarrier.py | 20 self.modem = self.bus.get_object(self.CMM, dev)
54 status = self.modem.GetStatus(dbus_interface=self.IMODEM_SIMPLE)
62 self.modem.SetCarrier(c, dbus_interface=self.IMODEM_GOBI)
67 self.modem = self.bus.get_object(self.CMM, modems[0])
69 self.modem = None
94 self.device_added(self.modem.__dbus_object_path__) # start test
97 if self.modem and self.to_carrier != carrier:
|
| /external/autotest/client/site_tests/cellular_GobiRecoverFromDesync/ |
| D | cellular_GobiRecoverFromDesync.py | 222 self.test_env.modem.GobiModem().InjectFault('SdkError', 12)
223 self.test_env.modem.SimpleModem().GetStatus()
239 gobi = self.test_env.modem.GobiModem()
242 self.test_env.modem.SimpleModem().Connect(
251 self.test_env.modem.Enable(False)
255 self.test_env.modem.GobiModem().InjectFault('SdkError', 1)
257 self.test_env.modem.Enable(True)
269 def CompareModemPowerState(self, modem, expected_state): argument
271 props = modem.GetModemProperties()
307 if not self.CompareModemPowerState(self.test_env.modem, True):
[all …]
|
| /external/autotest/client/site_tests/cellular_ConnectFailure/ |
| D | control.pseudomodem | 7 PURPOSE = "Verify that a failed modem connect attempt puts the service in a failed state."
22 service to enter the Failed state. It requires a machine with a modem
34 'test-modem-class' : 'GetFailConnectModem',
35 'test-modem-arg' : ['3GPP']},))
42 'test-modem-class' : 'GetFailConnectModem',
43 'test-modem-arg' : ['CDMA']},))
|
| /external/autotest/client/site_tests/cellular_Identifiers/ |
| D | control.altair-messi_v | 7 PURPOSE = "Verify cellular modem provides correct identification information."
10 - Cellular modem does not provide an identifier
17 DEPENDENCIES = "modem:altair-messi_v"
19 Tests that a cellular modem provides correct identification information
21 The test queries the modem for the following identifiers:
|
| D | control.altair-alt3100 | 7 PURPOSE = "Verify cellular modem provides correct identification information."
10 - Cellular modem does not provide an identifier
17 DEPENDENCIES = "modem:altair-alt3100"
19 Tests that a cellular modem provides correct identification information
21 The test queries the modem for the following identifiers:
|
| D | control.novatel-e362 | 7 PURPOSE = "Verify cellular modem provides correct identification information."
10 - Cellular modem does not provide an identifier
17 DEPENDENCIES = "modem:novatel-e362"
19 Tests that a cellular modem provides correct identification information
21 The test queries the modem for the following identifiers:
|
| D | control.huawei-mu736 | 7 PURPOSE = "Verify cellular modem provides correct identification information."
10 - Cellular modem does not provide an identifier
17 DEPENDENCIES = "modem:huawei-mu736"
19 Tests that a cellular modem provides correct identification information
21 The test queries the modem for the following identifiers:
|
| D | control.gobi3k | 7 PURPOSE = "Verify cellular modem provides correct identification information."
10 - Cellular modem does not provide an identifier
17 DEPENDENCIES = "modem:gobi3k"
19 Tests that a cellular modem provides correct identification information
21 The test queries the modem for the following identifiers:
|
| D | control.zte-mf190 | 7 PURPOSE = "Verify cellular modem provides correct identification information."
10 - Cellular modem does not provide an identifier
17 DEPENDENCIES = "modem:zte-mf190"
19 Tests that a cellular modem provides correct identification information
21 The test queries the modem for the following identifiers:
|