Name |
Date |
Size |
#Lines |
LOC |
||
---|---|---|---|---|---|---|
.. | - | - | ||||
Kconfig | D | 23-Nov-2023 | 150 | 13 | 8 | |
MAINTAINERS | D | 23-Nov-2023 | 162 | 7 | 6 | |
Makefile | D | 23-Nov-2023 | 171 | 8 | 1 | |
README | D | 23-Nov-2023 | 561 | 22 | 13 | |
mx6cuboxi.c | D | 23-Nov-2023 | 19.3 KiB | 759 | 595 |
README
1How to use U-Boot on Solid-run mx6 Hummingboard and Cubox-i 2----------------------------------------------------------- 3 4- Build U-Boot for Hummingboard/Cubox-i: 5 6$ make mrproper 7$ make mx6cuboxi_defconfig 8$ make 9 10This will generate the SPL image called SPL and the u-boot.img. 11 12- Flash the SPL image into the SD card: 13 14sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync 15 16- Flash the u-boot.img image into the SD card: 17 18sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync 19 20- Insert the SD card in the board, power it up and U-Boot messages should 21come up. 22