Lines Matching full:6
1 <6>[ 0.000000] Booting Linux on physical CPU 0
2 <6>[ 0.000000] Initializing cgroup subsys cpu
8 <6>[ 0.000000] memory pool 3 (start fe9ff000 size 1600000) initialized
9 <6>[ 0.000000] Initialized persistent memory from 88700000-887fffff
12 <6>[ 0.000000] socinfo_init: v6, id=109, ver=1.1, raw_id=1817, raw_ver=1817, hw_plat=8, hw_plat…
13 <6>[ 0.000000] accessory_chip=0 hw_plat_subtype=1
20 <6>[ 0.000000] allocating 21626880 bytes at c228e000 (8248e000 physical) for fb
21 <6>[ 0.000000] PERCPU: Embedded 7 pages/cpu @c3731000 s15680 r0 d12992 u32768
26 <6>[ 0.000000] UART CONSOLE : enable
27 <6>[ 0.000000] kcal is 0|0|0|x
28 <6>[ 0.000000] kcal not calibrated yet : 120
29 <6>[ 0.000000] set to default : 255
30 <6>[ 0.000000] BOARD : LGE input rev_11
31 <6>[ 0.000000] BOARD : LGE matched rev_11
32 <6>[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
33 <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
34 <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
35 <6>[ 0.000000] Memory: 134MB 74MB 7MB 1MB 253MB 1420MB = 1889MB total
47 <6>[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
48 <6>[ 0.000000] Preemptible hierarchical RCU implementation.
49 <6>[ 0.000000] NR_IRQS:921
50 <6>[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30520ns, wraps every 131084001ms
51 <6>[ 0.000000] Console: colour dummy device 80x30
52 <6>[ 0.000183] Calibrating delay loop (skipped) preset value.. 13.53 BogoMIPS (lpj=67677)
53 <6>[ 0.000213] pid_max: default: 32768 minimum: 301
54 <6>[ 0.000427] Security Framework initialized
55 <6>[ 0.000457] SELinux: Initializing.
57 <6>[ 0.000610] Mount-cache hash table entries: 512
58 <6>[ 0.001861] Initializing cgroup subsys debug
59 <6>[ 0.001892] Initializing cgroup subsys cpuacct
60 <6>[ 0.001892] Initializing cgroup subsys freezer
61 <6>[ 0.002014] CPU: Testing write buffer coherency: ok
62 <6>[ 0.002289] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
63 <6>[ 0.002319] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
64 <6>[ 0.002411] Setting up static identity map for 0x80a27078 - 0x80a27100
65 <6>[ 0.005676] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
66 <6>[ 0.008148] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
67 <6>[ 0.010621] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
68 <6>[ 0.010743] Brought up 4 CPUs
69 <6>[ 0.010773] SMP: Total of 4 processors activated (54.14 BogoMIPS).
70 <6>[ 0.027010] dummy:
71 <6>[ 0.027407] NET: Registered protocol family 16
73 <6>[ 0.031222] meminfo_init: smem ram ptable found: ver: 0 len: 6
74 <6>[ 0.031222] Found 2 memory banks grouped into 16 memory regions
75 <6>[ 0.031435] gpiochip_add: registered GPIOs 0 to 151 on device: msmgpio
77 <6>[ 0.032290] socinfo_init: v6, id=109, ver=1.1, raw_id=1817, raw_ver=1817, hw_plat=8, hw_plat…
78 <6>[ 0.032290] accessory_chip=0 hw_plat_subtype=1
79 <6>[ 0.032321] msm_rpm_init: RPM firmware 3.0.16842886
88 <6>[ 0.071295] pm8921_probe: PMIC revision 1: F4
89 <6>[ 0.071326] pm8921_probe: PMIC revision 2: 06
90 <6>[ 0.071326] pm8921_probe: PMIC version: PM8921 rev 3.0
91 <6>[ 0.071356] pm8921_probe: PMIC Restart Reason: Triggered from CHG (usb charger insertion)
92 <6>[ 0.072485] gpiochip_add: registered GPIOs 152 to 195 on device: pm-gpio
93 <6>[ 0.073004] pm_gpio_probe: OK: base=152, ngpio=44
94 <6>[ 0.073279] gpiochip_add: registered GPIOs 196 to 207 on device: pm8xxx-mpp
95 <6>[ 0.073370] pm8xxx_mpp_probe: OK: base=196, ngpio=12
96 <6>[ 0.075446] pm8821_probe: PMIC revision 1: PM8821 rev F3
97 <6>[ 0.075476] pm8821_probe: PMIC revision 2: PM8821 rev 0B
98 <6>[ 0.075476] pm8821_probe: PMIC version: PM8821 ver 2.1
99 <6>[ 0.076087] gpiochip_add: registered GPIOs 208 to 211 on device: pm8xxx-mpp
100 <6>[ 0.076117] pm8xxx_mpp_probe: OK: base=208, ngpio=4
101 <6>[ 0.076667] gpio_vreg_probe: id=86, name=ext_dsv_load, gpio=86, gpio_label=ext_dsv_load_en
102 <6>[ 0.077979] saw_probe: id=0, name=8921_s5
103 <6>[ 0.078345] saw_probe: id=1, name=8921_s6
104 <6>[ 0.078712] saw_probe: id=2, name=8821_s0
105 <6>[ 0.079078] saw_probe: id=3, name=8821_s1
106 <6>[ 0.088081] persistent_ram: found existing buffer, size 47451, start 47451
107 <6>[ 0.237479] console [ram-1] enabled
108 <6>[ 0.238882] [NORMAL-DEBUG] apq8064_device_uart_gsbi4.id : 0
109 <6>[ 0.238974] [DEBUG] uart_enable : 1
110 <6>[ 0.241660] [Touch D] apq8064_init_input: NOT DCM KDDI, reg synaptics driver
120 <6>[ 0.246757] sps:BAM 0x12244000 enabled: ver:0x5, number of pipes:20
121 <6>[ 0.246909] sps:BAM 0x12244000 is registered.
122 <6>[ 0.247489] sps:sps is ready.
123 <6>[ 0.277979] bio: create slab <bio-0> at 0
124 <6>[ 0.278773] ION heap vmalloc created
125 <6>[ 0.278895] ION heap mm created at a0000000 with size 5c00000
126 <6>[ 0.279017] ION heap mm_fw created at 9fe00000 with size 1e0000
127 <6>[ 0.279200] ION heap mfc created at a5c00000 with size 2000
128 <6>[ 0.279322] ION heap iommu created
129 <6>[ 0.279536] ION heap qsecom created at fea07000 with size 780000
130 <6>[ 0.279658] ION heap audio created at ff187000 with size 4cf000
133 <6>[ 0.282160] sps:BAM 0x28084000 enabled: ver:0x12, number of pipes:31
134 <6>[ 0.282313] sps:BAM 0x28084000 is registered.
135 <6>[ 0.283168] usbcore: registered new interface driver usbfs
136 <6>[ 0.283473] usbcore: registered new interface driver hub
137 <6>[ 0.283686] usbcore: registered new device driver usb
138 <6>[ 0.284175] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-pwrkey/…
139 <6>[ 0.285121] Linux media interface: v0.10
140 <6>[ 0.285273] Linux video capture interface: v2.00
144 <6>[ 0.287532] msm_iommu_dev: device vpe mapped at f0400000, with 2 ctx banks
145 <6>[ 0.287837] msm_iommu_dev: device mdp0 mapped at f0600000, with 2 ctx banks
146 <6>[ 0.288112] msm_iommu_dev: device mdp1 mapped at f0800000, with 2 ctx banks
147 <6>[ 0.288325] msm_iommu_dev: device rot mapped at f0a00000, with 2 ctx banks
148 <6>[ 0.288631] msm_iommu_dev: device ijpeg mapped at f0c00000, with 2 ctx banks
149 <6>[ 0.288844] msm_iommu_dev: device vfe mapped at f0e00000, with 2 ctx banks
150 <6>[ 0.289119] msm_iommu_dev: device vcodec_a mapped at f1000000, with 2 ctx banks
151 <6>[ 0.289394] msm_iommu_dev: device vcodec_b mapped at f1200000, with 2 ctx banks
152 <6>[ 0.289607] msm_iommu_dev: device gfx3d mapped at f1400000, with 3 ctx banks
153 <6>[ 0.289913] msm_iommu_dev: device jpegd mapped at f1600000, with 2 ctx banks
154 <6>[ 0.290187] msm_iommu_dev: device gfx3d1 mapped at f1800000, with 3 ctx banks
155 <6>[ 0.290431] msm_iommu_dev: device vcap mapped at f1a00000, with 2 ctx banks
156 <6>[ 0.290950] msm_iommu_ctx msm_iommu_ctx.2: context vpe_src using bank 0
157 <6>[ 0.291194] msm_iommu_ctx msm_iommu_ctx.3: context vpe_dst using bank 1
158 <6>[ 0.291500] msm_iommu_ctx msm_iommu_ctx.4: context mdp_port0_cb0 using bank 0
159 <6>[ 0.291835] msm_iommu_ctx msm_iommu_ctx.5: context mdp_port0_cb1 using bank 1
160 <6>[ 0.292079] msm_iommu_ctx msm_iommu_ctx.6: context mdp_port1_cb0 using bank 0
161 <6>[ 0.292415] msm_iommu_ctx msm_iommu_ctx.7: context mdp_port1_cb1 using bank 1
162 <6>[ 0.292720] msm_iommu_ctx msm_iommu_ctx.8: context rot_src using bank 0
163 <6>[ 0.292965] msm_iommu_ctx msm_iommu_ctx.9: context rot_dst using bank 1
164 <6>[ 0.293300] msm_iommu_ctx msm_iommu_ctx.10: context ijpeg_src using bank 0
165 <6>[ 0.293514] msm_iommu_ctx msm_iommu_ctx.11: context ijpeg_dst using bank 1
166 <6>[ 0.293850] msm_iommu_ctx msm_iommu_ctx.12: context vfe_imgwr using bank 0
167 <6>[ 0.294155] msm_iommu_ctx msm_iommu_ctx.13: context vfe_misc using bank 1
168 <6>[ 0.294399] msm_iommu_ctx msm_iommu_ctx.14: context vcodec_a_stream using bank 0
169 <6>[ 0.294735] msm_iommu_ctx msm_iommu_ctx.15: context vcodec_a_mm1 using bank 1
170 <6>[ 0.295009] msm_iommu_ctx msm_iommu_ctx.16: context vcodec_b_mm2 using bank 0
171 <6>[ 0.295376] msm_iommu_ctx msm_iommu_ctx.17: context gfx3d_user using bank 0
172 <6>[ 0.295742] msm_iommu_ctx msm_iommu_ctx.18: context gfx3d_priv using bank 1
173 <6>[ 0.295986] msm_iommu_ctx msm_iommu_ctx.0: context jpegd_src using bank 0
174 <6>[ 0.296291] msm_iommu_ctx msm_iommu_ctx.1: context jpegd_dst using bank 1
175 <6>[ 0.296658] msm_iommu_ctx msm_iommu_ctx.19: context gfx3d1_user using bank 0
176 <6>[ 0.296963] msm_iommu_ctx msm_iommu_ctx.20: context gfx3d1_priv using bank 1
177 <6>[ 0.297268] msm_iommu_ctx msm_iommu_ctx.21: context vcap_vc using bank 0
178 <6>[ 0.297512] msm_iommu_ctx msm_iommu_ctx.22: context vcap_vp using bank 1
179 <6>[ 0.297848] Advanced Linux Sound Architecture Driver Version 1.0.25.
180 <6>[ 0.298580] Bluetooth: Core ver 2.16
181 <6>[ 0.298702] NET: Registered protocol family 31
182 <6>[ 0.298794] Bluetooth: HCI device and connection manager initialized
183 <6>[ 0.298977] Bluetooth: HCI socket layer initialized
184 <6>[ 0.299069] Bluetooth: L2CAP socket layer initialized
185 <6>[ 0.299465] Bluetooth: SCO socket layer initialized
186 <6>[ 0.299862] cfg80211: Calling CRDA to update world regulatory domain
187 <6>[ 0.300076] cfg80211: World regulatory domain updated:
188 <6>[ 0.300167] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
189 <6>[ 0.300320] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
190 <6>[ 0.300473] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
191 <6>[ 0.300564] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
192 <6>[ 0.300747] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
193 <6>[ 0.300900] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
194 <6>[ 0.301602] earjack debugger probed
195 <6>[ 0.302701] Switching to clocksource gp_timer
196 <6>[ 0.340546] NET: Registered protocol family 2
197 <6>[ 0.340912] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
198 <6>[ 0.341675] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
199 <6>[ 0.343110] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
200 <6>[ 0.343842] TCP: Hash tables configured (established 131072 bind 65536)
201 <6>[ 0.343995] TCP: reno registered
202 <6>[ 0.344117] UDP hash table entries: 512 (order: 2, 16384 bytes)
203 <6>[ 0.344300] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
204 <6>[ 0.344727] NET: Registered protocol family 1
205 <6>[ 0.345215] Trying to unpack rootfs image as initramfs...
206 <6>[ 0.380344] Freeing initrd memory: 564K
207 <6>[ 0.382054] Detected 5 counters on the L2CC PMU.
208 <6>[ 0.384159] pil_qdsp6v4 pil_qdsp6v4.0: using secure boot
209 <6>[ 0.385899] pil_riva pil_riva: using secure boot
210 <6>[ 0.389012] pil_dsps pil_dsps: using secure boot
211 <6>[ 0.390538] pil_gss pil_gss: using secure boot
213 <6>[ 0.398931] msm_dsps driver version 4.03.
214 <6>[ 0.400396] NET: Registered protocol family 27
215 <6>[ 0.403479] lpass_fatal_init: lpass SSR driver init'ed.
216 <6>[ 0.403692] wcnss_8960: module initialized
217 <6>[ 0.404150] gss_8064_init: gss fatal driver init'ed.
218 <6>[ 0.404791] acpuclk-8064 acpuclk-8064: SPEED BIN: 0
219 <6>[ 0.404883] acpuclk-8064 acpuclk-8064: ACPU PVS: 4
220 <6>[ 0.407508] acpuclk-8064 acpuclk-8064: CPU0: 12 frequencies supported
221 <6>[ 0.407599] acpuclk-8064 acpuclk-8064: CPU1: 12 frequencies supported
222 <6>[ 0.407752] acpuclk-8064 acpuclk-8064: CPU2: 12 frequencies supported
223 <6>[ 0.407935] acpuclk-8064 acpuclk-8064: CPU3: 12 frequencies supported
224 <6>[ 0.408545] kcal_ctrl_init
225 <6>[ 0.409125] persistent_ram: no valid data in buffer (sig = 0x4e4f524d)
229 <6>[ 0.480756] mdm_pblrdy_change: mdm id 0: pbl ready:1
230 <6>[ 0.694033] usbcore: registered new interface driver hsic_sysmon
231 <6>[ 0.694460] audit: initializing netlink socket (disabled)
234 <6>[ 0.706455] fuse init (API version 7.18)
235 <6>[ 0.706851] msgmni has been set to 1157
237 <6>[ 0.710331] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
238 <6>[ 0.710514] io scheduler noop registered
239 <6>[ 0.710605] io scheduler deadline registered
240 <6>[ 0.710972] io scheduler cfq registered (default)
241 <6>[ 0.711613] lm3530 probed
242 <6>[ 0.714146] mipi_dsi base phy_addr = 0x4700000 virt = 0xf1c00000
243 <6>[ 0.714329] mmss_sfpb base phy_addr = 0x5700000,virt = 0xf00f8000
244 <6>[ 0.715092] mipi_lgit_lcd_probe start
245 <6>[ 0.715275] setting pdata->panel_info.fb_num to 3. type: 8
246 <6>[ 0.727178] FrameBuffer[0] 768x1280 size=11796480 bytes is registered successfully!
249 <6>[ 0.729345] setting pdata->panel_info.fb_num to 1. type: 7
250 <6>[ 0.730505] FrameBuffer[1] 1920x1080 size=0 bytes is registered successfully!
252 <6>[ 0.731329] mdp4_dtv_vsync_init: ndx=0
254 <6>[ 0.731756] hdmi_msm hdmi_msm.1: hdmi_msm_config_hdcp_feature: HDCP Feature: Enabled
255 <6>[ 0.732611] setting pdata->panel_info.fb_num to 1. type: 10
258 <6>[ 0.734167] FrameBuffer[2] 1280x720 size=0 bytes is registered successfully!
260 <6>[ 0.736090]
261 <6>[ 0.736090] msm_vidc_enc: Inside vid_enc_init()
262 <6>[ 0.736517]
263 <6>[ 0.736548] msm_vidc_enc: Inside vid_enc_vcd_init()
265 <6>[ 0.738348] msm_serial_hs module loaded
266 <6>[ 0.738745] msm_serial_hsl: detected port #0
267 <6>[ 0.739020] msm_serial_hsl.0: ttyHSL0 at MMIO 0x16340000 (irq = 184) is a MSM
268 <6>[ 0.739264] msm_serial_hsl: console setup on port #0
269 <6>[ 0.739569] console [ttyHSL0] enabled
270 <6>[ 0.739935] msm_serial_hsl: driver initialized
271 <6>[ 0.741584] msm_rotator_probe: rotator_hw_revision=2
272 <6>[ 0.745246] diagchar initialized now
273 <6>[ 0.746955] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
274 <6>[ 0.757759] brd: module loaded
275 <6>[ 0.762063] loop: module loaded
276 <6>[ 0.764016] anx7808 init gpio
277 <6>[ 0.803174] anx7808 dvdd is already on
278 <6>[ 0.833206] sp_tx_hardware_poweron: anx7808 power on
279 <6>[ 0.834304] sp_tx_chip_located: ANX7808 BA is found.
281 <6>[ 0.893239] sp_tx_hardware_powerdown: anx7808 power down
284 <6>[ 0.894155] tabla2x-slim tabla2x-slim: Platform data from board file
285 <6>[ 0.960933] wcd9xxx_check_codec_type: codec is tabla_codec
286 <6>[ 0.961117] wcd9xxx_check_codec_type: Read codec idbytes & version
287 <6>[ 0.961147] byte_0[00000002] byte_1[00000000] byte_2[00000000]
288 <6>[ 0.961147] byte_3[00000001] version = 2
291 <6>[ 0.965145] bcm2079x-i2c 0-a1fa: bcm2079x_probe, probing bcm2079x driver flags = 10
292 <6>[ 0.965573] bcm2079x-i2c 0-a1fa: requesting IRQ 317
293 <6>[ 0.966061] bcm2079x-i2c 0-a1fa: bcm2079x_probe, probing bcm2079x driver exited successfully
294 <6>[ 0.967251] SCSI Media Changer driver v0.25
295 <6>[ 0.969113] tun: Universal TUN/TAP device driver, 1.6
296 <6>[ 0.969327] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
297 <6>[ 0.969845] rmnet_init: BAM devices[8]
298 <6>[ 0.994994] PPP generic driver version 2.4.2
299 <6>[ 0.995666] PPP BSD Compression module registered
300 <6>[ 0.995849] PPP Deflate Compression module registered
301 <6>[ 0.996673] PPP MPPE Compression module registered
302 <6>[ 0.997009] NET: Registered protocol family 24
303 <6>[ 0.997283] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulat…
304 <6>[ 0.997619] CSLIP: code copyright 1989 Regents of the University of California.
305 <6>[ 0.998168] wcnss_wlan probed in built-in mode
306 <6>[ 0.999786] usbcore: registered new interface driver asix
307 <6>[ 1.000213] usbcore: registered new interface driver cdc_ether
308 <6>[ 1.000488] usbcore: registered new interface driver net1080
309 <6>[ 1.000915] usbcore: registered new interface driver cdc_subset
310 <6>[ 1.001190] usbcore: registered new interface driver zaurus
311 <6>[ 1.001831] usbcore: registered new interface driver cdc_ncm
312 <6>[ 1.002166] msm_otg msm_otg: msm_otg probe
314 <6>[ 1.002838] msm_otg msm_otg: OTG regs = f01f2000
315 <6>[ 1.006104] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
316 <6>[ 1.019471] msm_hsic_host msm_hsic_host: Qualcomm EHCI Host Controller using HSIC
317 <6>[ 1.019655] msm_hsic_host msm_hsic_host: new USB bus registered, assigned bus number 1
318 <6>[ 1.043338] msm_hsic_host msm_hsic_host: irq 261, io mem 0x12510000
319 <6>[ 1.063329] msm_hsic_host msm_hsic_host: USB 2.0 started, EHCI 1.00
320 <6>[ 1.063726] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
321 <6>[ 1.063879] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
322 <6>[ 1.064062] usb usb1: Product: Qualcomm EHCI Host Controller using HSIC
323 <6>[ 1.064153] usb usb1: Manufacturer: Linux 3.4.0-perf-gdffc258 ehci_hcd
324 <6>[ 1.064336] usb usb1: SerialNumber: msm_hsic_host
325 <6>[ 1.064886] hub 1-0:1.0: USB hub found
326 <6>[ 1.065099] hub 1-0:1.0: 1 port detected
327 <6>[ 1.066412] usbcore: registered new interface driver cdc_acm
328 <6>[ 1.066503] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
329 <6>[ 1.066687] Initializing USB Mass Storage driver...
330 <6>[ 1.066931] usbcore: registered new interface driver usb-storage
331 <6>[ 1.067053] USB Mass Storage support registered.
332 <6>[ 1.067236] usbcore: registered new interface driver ums-alauda
333 <6>[ 1.067388] usbcore: registered new interface driver ums-cypress
334 <6>[ 1.067602] usbcore: registered new interface driver ums-datafab
335 <6>[ 1.067724] usbcore: registered new interface driver ums-freecom
336 <6>[ 1.067938] usbcore: registered new interface driver ums-isd200
337 <6>[ 1.068090] usbcore: registered new interface driver ums-jumpshot
338 <6>[ 1.068304] usbcore: registered new interface driver ums-karma
339 <6>[ 1.068457] usbcore: registered new interface driver ums-onetouch
340 <6>[ 1.068670] usbcore: registered new interface driver ums-sddr09
341 <6>[ 1.068792] usbcore: registered new interface driver ums-sddr55
342 <6>[ 1.069037] usbcore: registered new interface driver ums-usbat
343 <6>[ 1.069250] usbcore: registered new interface driver usbserial
344 <6>[ 1.069433] usbserial: USB Serial Driver core
345 <6>[ 1.069555] usbcore: registered new interface driver qc_csvt
346 <6>[ 1.069769] USB Serial support registered for qc_csvt
347 <6>[ 1.069922] usbcore: registered new interface driver usb_ehset_test
348 <6>[ 1.070166] usbcore: registered new interface driver diag_bridge
349 <6>[ 1.070502] usbcore: registered new interface driver mdm_bridge
350 <6>[ 1.071478] usbcore: registered new interface driver ks_bridge
351 <6>[ 1.071570] ksb_init: init done
352 <6>[ 1.071997] msm_otg msm_otg: phy_reset: success
353 <6>[ 1.072821] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
354 <6>[ 1.073157] mbim_init: initialize 1 instances
355 <6>[ 1.073462] mbim_init: Initialized 1 ports
356 <6>[ 1.075568] rndis_qc_init: initialize rndis QC instance
357 <6>[ 1.076117] android_usb gadget: Mass Storage Function, version: 2009/09/11
358 <6>[ 1.076209] android_usb gadget: Number of LUNs=1
359 <6>[ 1.076392] lun0: LUN: removable file: (no medium)
360 <6>[ 1.076850] android_usb gadget: android_usb ready
361 <6>[ 1.078467] input: keypad_8064 as /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-keypad/inpu…
363 <6>[ 1.283564] input: touch_dev as /devices/virtual/input/input2
364 <6>[ 1.305753] [Touch] common[1] finger[17] flash[52] button[0]
365 <6>[ 1.307034] [Touch] IC is 7020, H pattern, panel is G2, Firmware: E159.
366 <6>[ 1.309110] [Touch] fw_rev[0:0] product_id[TM2369:SynaReadCo] force_upgrade[0]
367 <6>[ 1.309171] [Touch] Touch driver is initialized
368 <6>[ 1.309781] [Touch] DO NOT UPDATE 7020 G2 H pattern FW-upgrade is not executed
369 <6>[ 1.310636] using rtc device, pm8xxx_rtc, for alarms
370 <6>[ 1.310758] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
371 <6>[ 1.311460] i2c /dev entries driver
372 <6>[ 1.312009] usbcore: registered new interface driver uvcvideo
373 <6>[ 1.312162] USB Video Class driver (1.1.1)
376 <6>[ 1.342255] msm_server_update_sensor_info mctl_node_name[0] = video1
378 <6>[ 1.371555] msm_server_update_sensor_info mctl_node_name[1] = video3
379 <6>[ 1.375553] msm_cam_server_request_irq IRQ Router hw is not present.
380 <6>[ 1.376346] lm3559_init
382 <6>[ 1.402929] pm8xxx_tm_probe: OK
383 <6>[ 1.403448] usb 1-1: new high-speed USB device number 2 using msm_hsic_host
384 <6>[ 1.404028] pm8xxx_tm_probe: OK
385 <6>[ 1.405951] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
386 <6>[ 1.407416] cpuidle: using governor ladder
387 <6>[ 1.407599] cpuidle: using governor menu
388 <6>[ 1.408515] mmc0: SDCC Version: 0x0000001a
389 <6>[ 1.410315] mmc0: bam physical base=0x12402000
390 <6>[ 1.410437] mmc0: bam virtual base=0xf0334000
391 <6>[ 1.410590] sps:BAM 0x12402000 is registered.
392 <6>[ 1.410712] mmc0: BAM device registered. bam_handle=0xef00c800
393 <6>[ 1.411109] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
394 <6>[ 1.411628] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012402000 irq 130
395 <6>[ 1.411902] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012400800
397 <6>[ 1.413978] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma -1 dmacrcri -1
398 <6>[ 1.414161] mmc0: Controller capabilities: 0x0000039e
399 <6>[ 1.414253] mmc0: 8 bit data mode enabled
400 <6>[ 1.414344] mmc0: 4 bit data mode disabled
401 <6>[ 1.414497] mmc0: polling status mode disabled
402 <6>[ 1.414619] mmc0: MMC clock 400000 -> 96000000 Hz, PCLK 0 Hz
403 <6>[ 1.414802] mmc0: Slot eject status = 0
404 <6>[ 1.414893] mmc0: Power save feature enable = 1
405 <6>[ 1.414985] mmc0: SPS-BAM data transfer mode available
406 <6>[ 1.415809] usbcore: registered new interface driver usbhid
407 <6>[ 1.415931] usbhid: USB HID core driver
408 <6>[ 1.416847] ashmem: initialized
409 <6>[ 1.417701] usbcore: registered new interface driver snd-usb-audio
411 <6>[ 1.420265] amp_enable: amp enable bypass(2)
412 <6>[ 1.420387] amp_enable: AMP_EN is set to 0
413 <6>[ 1.421486] msm_pcm_probe: dev name msm-voip-dsp
414 <6>[ 1.421974] msm-dai-q6-mi2s msm-dai-q6-mi2s: msm_dai_q6_mi2s_platform_data_validation: playba…
415 <6>[ 1.422157] msm-dai-q6-mi2s msm-dai-q6-mi2s: msm_dai_q6_mi2s_platform_data_validation: playba…
416 <6>[ 1.423531] msm_pcm_probe: dev name msm-pcm-dsp
417 <6>[ 1.423989] msm_pcm_probe: dev name msm-multi-ch-pcm-dsp
418 <6>[ 1.424477] msm_pcm_probe: dev name msm-lowlatency-pcm-dsp
419 <6>[ 1.424568] adding pm_qos request in low latency driver
420 <6>[ 1.424752] done adding pm_qos request in low latency driver
421 <6>[ 1.425820] msm_compr_probe: dev name msm-compr-dsp
422 <6>[ 1.426583] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
425 <6>[ 1.428017] msm_audio_init: Not APQ8064 in I2S mode
426 <6>[ 1.470410] usb 1-1: New USB device found, idVendor=05c6, idProduct=9008
427 <6>[ 1.470746] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
428 <6>[ 1.471081] usb 1-1: Product: QHSUSB__BULK
429 <6>[ 1.471295] usb 1-1: Manufacturer: Qualcomm CDMA Technologies MSM
430 <6>[ 1.548084] mmc0: new HS200 MMC card at address 0001
431 <6>[ 1.549580] mmcblk0: mmc0:0001 016G92 14.6 GiB
433 <6>[ 1.555989] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 …
434 <6>[ 1.559804] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
435 <6>[ 1.560598] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
436 <6>[ 1.561483] asoc: snd-soc-dummy-dai <-> CS-VOICE mapping ok
437 <6>[ 1.562337] asoc: snd-soc-dummy-dai <-> VoIP mapping ok
438 <6>[ 1.563131] asoc: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
439 <6>[ 1.564047] asoc: snd-soc-dummy-dai <-> SLIMBUS0_HOSTLESS mapping ok
440 <6>[ 1.565023] asoc: snd-soc-dummy-dai <-> INT_FM_HOSTLESS mapping ok
441 <6>[ 1.565725] asoc: msm-stub-rx <-> msm-dai-q6.241 mapping ok
442 <6>[ 1.566580] asoc: msm-stub-tx <-> msm-dai-q6.240 mapping ok
443 <6>[ 1.567465] asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok
444 <6>[ 1.568319] asoc: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok
445 <6>[ 1.569113] asoc: snd-soc-dummy-dai <-> HDMI_HOSTLESS mapping ok
446 <6>[ 1.570028] asoc: snd-soc-dummy-dai <-> VOICE_STUB mapping ok
447 <6>[ 1.570822] asoc: snd-soc-dummy-dai <-> VoLTE mapping ok
448 <6>[ 1.571707] asoc: snd-soc-dummy-dai <-> MultiMedia5 mapping ok
449 <6>[ 1.573050] asoc: tabla_rx1 <-> msm-dai-q6.16384 mapping ok
450 <6>[ 1.577872] asoc: tabla_tx1 <-> msm-dai-q6.16385 mapping ok
451 <6>[ 1.578574] asoc: msm-stub-rx <-> msm-dai-q6.12288 mapping ok
452 <6>[ 1.579398] asoc: msm-stub-tx <-> msm-dai-q6.12289 mapping ok
453 <6>[ 1.580070] asoc: msm-stub-rx <-> msm-dai-q6.12292 mapping ok
454 <6>[ 1.580833] asoc: msm-stub-tx <-> msm-dai-q6.12293 mapping ok
455 <6>[ 1.581535] asoc: msm-stub-rx <-> msm-dai-q6-hdmi.8 mapping ok
456 <6>[ 1.582420] asoc: msm-stub-rx <-> msm-dai-q6.224 mapping ok
457 <6>[ 1.583091] asoc: msm-stub-tx <-> msm-dai-q6.225 mapping ok
458 <6>[ 1.583824] asoc: msm-stub-rx <-> msm-dai-q6.2 mapping ok
459 <6>[ 1.584465] asoc: msm-stub-tx <-> msm-dai-q6.3 mapping ok
460 <6>[ 1.585228] asoc: tabla_rx2 <-> msm-dai-stub mapping ok
461 <6>[ 1.585899] asoc: tabla_tx1 <-> msm-dai-stub mapping ok
462 <6>[ 1.586601] asoc: msm-stub-rx <-> msm-dai-q6.16386 mapping ok
463 <6>[ 1.587273] asoc: msm-stub-tx <-> msm-dai-q6.16387 mapping ok
464 <6>[ 1.588127] asoc: tabla_tx2 <-> msm-dai-q6.16389 mapping ok
465 <6>[ 1.588829] asoc: tabla_rx3 <-> msm-dai-q6.16388 mapping ok
466 <6>[ 1.589714] asoc: msm-stub-rx <-> msm-dai-q6.16392 mapping ok
467 <6>[ 1.590691] asoc: msm-stub-tx <-> msm-dai-q6.16393 mapping ok
468 <6>[ 1.591820] asoc: tabla_tx3 <-> msm-dai-stub mapping ok
469 <6>[ 1.592827] asoc: msm-stub-rx <-> msm-dai-q6.16390 mapping ok
470 <6>[ 1.594109] asoc: msm-stub-tx <-> msm-dai-q6.16391 mapping ok
471 <6>[ 1.598138] input: apq8064-tabla-snd-card Button Jack as /devices/platform/soc-audio.0/sound/…
472 <6>[ 1.599053] input: apq8064-tabla-snd-card Headset Jack as /devices/platform/soc-audio.0/sound…
473 <6>[ 1.606134] u32 classifier
474 <6>[ 1.606317] Actions configured
475 <6>[ 1.606683] Netfilter messages via NETLINK v0.30.
476 <6>[ 1.606989] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
477 <6>[ 1.608850] ctnetlink v0.93: registering with nfnetlink.
478 <6>[ 1.609156] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
479 <6>[ 1.609491] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
480 <6>[ 1.610315] xt_time: kernel timezone is -0000
481 <6>[ 1.611689] ip_tables: (C) 2000-2006 Netfilter Core Team
482 <6>[ 1.612635] arp_tables: (C) 2002 David S. Miller
483 <6>[ 1.613001] TCP: cubic registered
484 <6>[ 1.613337] Initializing XFRM netlink socket
485 <6>[ 1.614924] NET: Registered protocol family 10
486 <6>[ 1.622798] Mobile IPv6
487 <6>[ 1.623226] ip6_tables: (C) 2000-2006 Netfilter Core Team
488 <6>[ 1.624019] IPv6 over IPv4 tunneling driver
489 <6>[ 1.625667] NET: Registered protocol family 17
490 <6>[ 1.625942] NET: Registered protocol family 15
491 <6>[ 1.626430] Bluetooth: RFCOMM TTY layer initialized
492 <6>[ 1.626827] Bluetooth: RFCOMM socket layer initialized
493 <6>[ 1.627010] Bluetooth: RFCOMM ver 1.11
494 <6>[ 1.627346] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
495 <6>[ 1.627529] Bluetooth: BNEP filters: protocol multicast
496 <6>[ 1.627712] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
497 <6>[ 1.628170] L2TP core driver, V2.0
498 <6>[ 1.628414] PPPoL2TP kernel driver, V2.0
499 <6>[ 1.630520] VFP support v0.3: implementor 51 architecture 64 part 6f variant 0 rev 2
501 <6>[ 1.631313] clock_late_init: Removing enables held for handed-off clocks
502 <6>[ 1.642270] MSM Watchdog Initialized
503 <6>[ 1.652586] registered taskstats version 1
504 <6>[ 1.653166] rtc-pm8xxx rtc-pm8xxx: setting system clock to 1970-01-01 00:02:01 UTC (121)
507 <3>[ 1.654295] read_ocv_trim: trim delta is 6
511 <6>[ 1.658019] ocv_ir_compensation: comp ocv = 3167663, ocv = 3190526, ibatt_ua = -104400, rbatt…
512 <6>[ 1.658141] read_soc_params_raw: discard shutdown soc! cc_raw = 0xffc556de
516 <6>[ 1.683656] adjust_soc: ibat_ua = -219600, vbat_uv = 3452615, soc = 0, batt_temp=253
518 <6>[ 1.686067] pm8921_bms_probe: OK battery_capacity_at_boot=0 volt = 3456405 ocv = 3563000
533 <6>[ 1.710422] wlc: bq51051b_wlc_probe: probe
534 <6>[ 1.710483] wlc: bq51051b_wlc_hw_init: hw_init
536 <6>[ 1.710880] [Touch] CHARGER = 1
538 <6>[ 1.711033] batt_temp_ctrl_init
539 <6>[ 1.711094] batt_temp_ctrl_probe
540 <6>[ 1.711643] android_vibrator: default amplitude 88
541 <6>[ 1.711765] android vibrator probed
542 <6>[ 1.711979] fsa8008 init
543 <6>[ 1.712223] fsa8008 probe
546 <6>[ 1.712772] input: hs_detect as /devices/virtual/input/input5
547 <6>[ 1.713016] ALSA device list:
548 <6>[ 1.713077] #0: apq8064-tabla-snd-card
549 <6>[ 1.713993] Freeing init memory: 1036K
569 <6>[ 1.823683] msm_otg msm_otg: Avail curr from USB = 500
570 <6>[ 1.823805] msm_otg msm_otg: current: 0 -> 500 (mA)
571 <6>[ 1.823897] pm_power_set_property_usb: usb_target_ma 0
572 <6>[ 1.826980] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
575 <6>[ 1.953670] unplug_check_worker: Stopping Unplug Check Worker USB == 500mA
576 <6>[ 2.041782] pm8921_battery_gauge_alarm_notify: status: 1
581 <6>[ 2.705264] keychord: using input dev pmic8xxx_pwrkey for fevent
582 <6>[ 2.705386] keychord: using input dev keypad_8064 for fevent
588 <6>[ 2.845566] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: barrier=1
590 <6>[ 2.845811] fs_mgr: __mount(source=/dev/block/platform/msm_sdcc.1/by-name/system,target=/syst…
591 <6>[ 2.854997] EXT4-fs (mmcblk0p22): recovery complete
592 <6>[ 2.855821] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: nomblk_io_…
594 <6>[ 2.855943] fs_mgr: check_fs(): mount(/dev/block/platform/msm_sdcc.1/by-name/cache,/cache,ext…
595 <6>[ 2.945032] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/cache
596 <6>[ 2.983641] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
597 <6>[ 2.983732] e2fsck: /dev/block/platform/msm_sdcc.1/by-name/cache: clean, 15/35840 files, 4621…
598 <6>[ 2.988554] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: barrier=1,…
600 <6>[ 2.988768] fs_mgr: __mount(source=/dev/block/platform/msm_sdcc.1/by-name/cache,target=/cache…
601 <6>[ 3.125927] EXT4-fs (mmcblk0p23): recovery complete
602 <6>[ 3.126690] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts: nomblk_io_…
604 <6>[ 3.126903] fs_mgr: check_fs(): mount(/dev/block/platform/msm_sdcc.1/by-name/userdata,/data,e…
605 <6>[ 3.214344] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/user…
606 <6>[ 3.239981] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
607 <6>[ 3.240103] e2fsck: /dev/block/platform/msm_sdcc.1/by-name/userdata: clean, 1607/863264 files…
608 <6>[ 3.245200] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts: barrier=1,…
610 <6>[ 3.245383] fs_mgr: __mount(source=/dev/block/platform/msm_sdcc.1/by-name/userdata,target=/da…
611 <6>[ 3.254173] EXT4-fs (mmcblk0p20): recovery complete
612 <6>[ 3.255028] EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts: barrier=1,…
614 <6>[ 3.255180] fs_mgr: __mount(source=/dev/block/platform/msm_sdcc.1/by-name/persist,target=/per…
616 <6>[ 3.262994] fs_mgr: __mount(source=/dev/block/platform/msm_sdcc.1/by-name/modem,target=/firmw…
617 <6>[ 3.300289] adsp_boot_store:going to call adsp_loader_do
618 <6>[ 3.586876] pil pil0: q6: Brought out of reset
619 <6>[ 3.619075] apr_tal:Q6 Is Up
621 <6>[ 3.694796] adsp_loader_do: Q6/ADSP image is loaded
622 <6>[ 3.699191] wcnss_wlan triggered by userspace
623 <6>[ 3.840195] pil pil1: wcnss: Brought out of reset
624 <6>[ 3.840439] wcnss_8960: Subsystem restart activated for riva.
625 <6>[ 3.981931] binder: 168:168 transaction failed 29189, size 0-0
630 <6>[ 4.029635] usbcore: registered new interface driver rmnet_usb
631 <6>[ 4.031039] rmnet usb ctrl Initialized.
634 <6>[ 4.049107] adb_open
635 <6>[ 4.049198] mtp_bind_config
636 <6>[ 4.049290] adb_bind_config
637 <6>[ 4.081489] mdm_modem_ioctl: Powering on mdm id 0
640 <6>[ 4.134137] msm_thermal: enabled = 0
641 <6>[ 4.151289] android_work: android_work: did not send uevent (0 0 (null))
642 <6>[ 4.221181] android_work: android_work: sent uevent USB_STATE=CONNECTED
643 <6>[ 4.254112] wcnss_wlan_ctrl_probe: SMD ctrl channel up
644 <6>[ 4.289577] android_usb gadget: high-speed config #1: android_usb
647 <6>[ 4.344636] android_work: android_work: sent uevent USB_STATE=CONFIGURED
648 <6>[ 4.425240] pil pil3: dsps: Brought out of reset
649 <6>[ 4.484999] wcnss_wlan triggered by userspace
650 <6>[ 4.814741] mipi_dsi_controller_cfg: DSI status=8 failed
651 <6>[ 4.814771] mipi_dsi_panel_power: mipi lcd function started status = 1
653 <6>[ 4.817091] mipi_dsi_panel_power : reset start.
654 <6>[ 4.838303] mipi_lgit_lcd_on started
655 <6>[ 4.859087] mipi_lgit_lcd_on finished
657 <6>[ 5.036807] hdmi_msm hdmi_msm.1: hdmi_msm_hpd_feature: 1
658 <6>[ 5.514115] mdp4_overlay_mdp_perf_upd mdp clk is changed [1] from 0 to 96000000
660 <6>[ 6.834610] msm_ta_detect_work: USB exit ta detection - frindex
661 <6>[ 8.058721] wcnss: version 01040102
662 <6>[ 8.125103] warning: `main' uses 32-bit capabilities (legacy support in use)
664 <6>[ 11.031252] request_suspend_state: wakeup (3->0) at 11026680147 (1970-01-01 00:02:10.86525641…
665 <6>[ 11.071417] mdm_modem_ioctl: normal boot of mdm id 0 done
666 <6>[ 11.080665] mdm_pblrdy_change: mdm id 0: pbl ready:0
667 <6>[ 11.726354] mdm_status_change: status = 1: mdm id 0 is now ready
668 <6>[ 11.764718] msm_hsic_host msm_hsic_host: remove, state 1
669 <6>[ 11.764810] usb usb1: USB disconnect, device number 1
670 <6>[ 11.764932] usb 1-1: USB disconnect, device number 2
671 <6>[ 11.768472] msm_hsic_host msm_hsic_host: USB bus 1 deregistered
672 <6>[ 11.783091] msm_hsic_host msm_hsic_host: Qualcomm EHCI Host Controller using HSIC
673 <6>[ 11.783152] msm_hsic_host msm_hsic_host: new USB bus registered, assigned bus number 1
674 <6>[ 11.804700] msm_hsic_host msm_hsic_host: irq 261, io mem 0x12510000
675 <6>[ 11.824629] msm_hsic_host msm_hsic_host: USB 2.0 started, EHCI 1.00
676 <6>[ 11.824843] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
677 <6>[ 11.824935] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
678 <6>[ 11.824996] usb usb1: Product: Qualcomm EHCI Host Controller using HSIC
679 <6>[ 11.825118] usb usb1: Manufacturer: Linux 3.4.0-perf-gdffc258 ehci_hcd
680 <6>[ 11.825240] usb usb1: SerialNumber: msm_hsic_host
681 <6>[ 11.826766] hub 1-0:1.0: USB hub found
682 <6>[ 11.826827] hub 1-0:1.0: 1 port detected
684 <6>[ 12.042728] pm8921_battery_gauge_alarm_notify: status: 1
691 <6>[ 12.164657] usb 1-1: new high-speed USB device number 2 using msm_hsic_host
692 <6>[ 12.230398] usb 1-1: New USB device found, idVendor=05c6, idProduct=9048
693 <6>[ 12.230520] usb 1-1: New USB device strings: Mfr=3, Product=2, SerialNumber=0
694 <6>[ 12.230611] usb 1-1: Product: Qualcomm CDMA Technologies MSM
695 <6>[ 12.230672] usb 1-1: Manufacturer: Qualcomm, Incorporated
696 <6>[ 12.247916] rmnet_usb 1-1:1.5: rmnet_usb0: register 'rmnet_usb' at usb-msm_hsic_host-1, RmNET…
697 <6>[ 12.253288] rmnet_usb 1-1:1.6: rmnet_usb1: register 'rmnet_usb' at usb-msm_hsic_host-1, RmNET…
698 <6>[ 12.338928] rmnet_usb 1-1:1.7: rmnet_usb2: register 'rmnet_usb' at usb-msm_hsic_host-1, RmNET…
699 <6>[ 12.417182] rmnet_usb 1-1:1.8: rmnet_usb3: register 'rmnet_usb' at usb-msm_hsic_host-1, RmNET…
704 <6>[ 14.265008] wcnss_post_bootup: Cancel APPS vote for Iris & Riva
715 <6>[ 16.650419] acc_open
716 <6>[ 16.650511] acc_release
717 <6>[ 16.866198] wlan: loading driver v3.2.3.22
724 <6>[ 16.887837] DefaultCountry is WS
725 <6>[ 17.182878] wlan: WCNSS WLAN version 1.4.1.2
726 <6>[ 17.183122] wlan: WCNSS software version 201078
727 <6>[ 17.183580] wlan: WCNSS hardware version WCN v2.0 RadioPhy vIris_TSMC_2.0 with 48MHz XO
728 <6>[ 17.187273] DefaultCountry is WS
731 <6>[ 17.260125] wlan: driver loaded
733 <6>[ 17.390660] ADDRCONF(NETDEV_UP): p2p0: link is not ready
735 <6>[ 17.599481] ADDRCONF(NETDEV_UP): wlan0: link is not ready
776 <6>[ 17.918419] mtp_open
777 <6>[ 17.927300] msm_vidc_venc: Inside vid_enc_open()
778 <6>[ 17.927422]
779 <6>[ 17.927422] msm_vidc_enc: Inside vid_enc_open_client()
782 <6>[ 17.964901] fw_version 9:23:2014
783 <6>[ 17.966061]
784 <6>[ 17.966061] msm_vidc_enc: Inside vid_enc_release()
785 <6>[ 17.966366]
786 <6>[ 17.966366] msm_vidc_enc: Inside vid_enc_close_client()
787 <6>[ 17.989409]
788 <6>[ 17.989409] msm_vidc_enc: Return from vid_enc_release()
789 <6>[ 17.990752] msm_vidc_venc: Inside vid_enc_open()
790 <6>[ 17.990874]
791 <6>[ 17.990874] msm_vidc_enc: Inside vid_enc_open_client()
792 <6>[ 18.015199] fw_version 9:23:2014
793 <6>[ 18.016297]
794 <6>[ 18.016297] msm_vidc_enc: Inside vid_enc_release()
795 <6>[ 18.016542]
796 <6>[ 18.016542] msm_vidc_enc: Inside vid_enc_close_client()
797 <6>[ 18.039188]
798 <6>[ 18.039218] msm_vidc_enc: Return from vid_enc_release()
799 <6>[ 18.040531] msm_vidc_venc: Inside vid_enc_open()
800 <6>[ 18.040683]
801 <6>[ 18.040683] msm_vidc_enc: Inside vid_enc_open_client()
802 <6>[ 18.065038] fw_version 9:23:2014
803 <6>[ 18.066137]
804 <6>[ 18.066137] msm_vidc_enc: Inside vid_enc_release()
805 <6>[ 18.066351]
806 <6>[ 18.066351] msm_vidc_enc: Inside vid_enc_close_client()
807 <6>[ 18.089424]
808 <6>[ 18.089424] msm_vidc_enc: Return from vid_enc_release()
809 <6>[ 18.101724] msm_vidc_dec: Inside vid_dec_open()
810 <6>[ 18.124919] fw_version 9:23:2014
811 <6>[ 18.126293] msm_vidc_dec: Inside vid_dec_release()
812 <6>[ 18.151014] msm_vidc_dec: Return from vid_dec_release()
813 <6>[ 18.224690] pil pil2: vidc: Brought out of reset
814 <6>[ 18.244956] fw_version 9:23:2014
816 <6>[ 18.250511] msm_vidc_dec: Inside vid_dec_release_secure()
819 <6>[ 18.292385] msm_vidc_dec: Return from vid_dec_release_secure()
820 <6>[ 18.293728] msm_vidc_dec: Inside vid_dec_open()
821 <6>[ 18.314939] fw_version 9:23:2014
822 <6>[ 18.316007] msm_vidc_dec: Inside vid_dec_release()
823 <6>[ 18.339508] msm_vidc_dec: Return from vid_dec_release()
824 <6>[ 18.340759] msm_vidc_dec: Inside vid_dec_open()
825 <6>[ 18.364932] fw_version 9:23:2014
826 <6>[ 18.366091] msm_vidc_dec: Inside vid_dec_release()
827 <6>[ 18.388921] msm_vidc_dec: Return from vid_dec_release()
840 <6>[ 19.178788] bcm2079x-i2c 0-a1fa: 10,28
841 <6>[ 19.428933] msm_enqueue: queue eventdata new max is 1
845 <6>[ 19.490004] bcm2079x-i2c 0-a1fa: bcm2079x_dev_unlocked_ioctl, BCMNFC_CHANGE_ADDR (fa02, 77):
846 <6>[ 19.490065] bcm2079x-i2c 0-a1fa: Change client device from (0x0079) flag = 0000, addr_data[9]…
847 <6>[ 19.490553] bcm2079x-i2c 0-a1fa: Change client device changed to (0x0077) flag = 0000, ret = …
848 <6>[ 19.586326] msm_enqueue: queue control new max is 1
849 <6>[ 19.622676] lm3559_flash_set_led_state: led_state = 3
850 <6>[ 19.688203] lm3559_flash_set_led_state: led_state = 4
851 <6>[ 19.688264] lm3559_config_gpio_off
853 <6>[ 19.846116] msm_enqueue: queue eventdata new max is 1
854 <6>[ 19.897939] msm_enqueue: queue control new max is 1
855 <6>[ 19.916038] lm3559_flash_set_led_state: led_state = 3
856 <6>[ 19.953975] lm3559_flash_set_led_state: led_state = 4
857 <6>[ 19.954097] lm3559_config_gpio_off
859 <6>[ 22.034732] adjust_soc: ibat_ua = 302400, vbat_uv = 3340250, soc = 0, batt_temp=253
867 <6>[ 22.543720] pm8921_battery_gauge_alarm_notify: status: 1