/* * Copyright © 2011 Intel Corporation * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice (including the next * paragraph) shall be included in all copies or substantial portions of the * Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS * IN THE SOFTWARE. */ #include "brw_vec4.h" #include "brw_cfg.h" #include "brw_eu.h" #include "util/u_math.h" namespace brw { vec4_instruction::vec4_instruction(enum opcode opcode, const dst_reg &dst, const src_reg &src0, const src_reg &src1, const src_reg &src2) { this->opcode = opcode; this->dst = dst; this->src[0] = src0; this->src[1] = src1; this->src[2] = src2; this->saturate = false; this->force_writemask_all = false; this->no_dd_clear = false; this->no_dd_check = false; this->writes_accumulator = false; this->conditional_mod = BRW_CONDITIONAL_NONE; this->predicate = BRW_PREDICATE_NONE; this->predicate_inverse = false; this->target = 0; this->shadow_compare = false; this->eot = false; this->ir = NULL; this->urb_write_flags = BRW_URB_WRITE_NO_FLAGS; this->header_size = 0; this->flag_subreg = 0; this->mlen = 0; this->base_mrf = 0; this->offset = 0; this->exec_size = 8; this->group = 0; this->size_written = (dst.file == BAD_FILE ? 0 : this->exec_size * type_sz(dst.type)); this->annotation = NULL; } vec4_instruction * vec4_visitor::emit(vec4_instruction *inst) { inst->ir = this->base_ir; inst->annotation = this->current_annotation; this->instructions.push_tail(inst); return inst; } vec4_instruction * vec4_visitor::emit_before(bblock_t *block, vec4_instruction *inst, vec4_instruction *new_inst) { new_inst->ir = inst->ir; new_inst->annotation = inst->annotation; inst->insert_before(block, new_inst); return inst; } vec4_instruction * vec4_visitor::emit(enum opcode opcode, const dst_reg &dst, const src_reg &src0, const src_reg &src1, const src_reg &src2) { return emit(new(mem_ctx) vec4_instruction(opcode, dst, src0, src1, src2)); } vec4_instruction * vec4_visitor::emit(enum opcode opcode, const dst_reg &dst, const src_reg &src0, const src_reg &src1) { return emit(new(mem_ctx) vec4_instruction(opcode, dst, src0, src1)); } vec4_instruction * vec4_visitor::emit(enum opcode opcode, const dst_reg &dst, const src_reg &src0) { return emit(new(mem_ctx) vec4_instruction(opcode, dst, src0)); } vec4_instruction * vec4_visitor::emit(enum opcode opcode, const dst_reg &dst) { return emit(new(mem_ctx) vec4_instruction(opcode, dst)); } vec4_instruction * vec4_visitor::emit(enum opcode opcode) { return emit(new(mem_ctx) vec4_instruction(opcode, dst_reg())); } #define ALU1(op) \ vec4_instruction * \ vec4_visitor::op(const dst_reg &dst, const src_reg &src0) \ { \ return new(mem_ctx) vec4_instruction(BRW_OPCODE_##op, dst, src0); \ } #define ALU2(op) \ vec4_instruction * \ vec4_visitor::op(const dst_reg &dst, const src_reg &src0, \ const src_reg &src1) \ { \ return new(mem_ctx) vec4_instruction(BRW_OPCODE_##op, dst, \ src0, src1); \ } #define ALU2_ACC(op) \ vec4_instruction * \ vec4_visitor::op(const dst_reg &dst, const src_reg &src0, \ const src_reg &src1) \ { \ vec4_instruction *inst = new(mem_ctx) vec4_instruction( \ BRW_OPCODE_##op, dst, src0, src1); \ inst->writes_accumulator = true; \ return inst; \ } #define ALU3(op) \ vec4_instruction * \ vec4_visitor::op(const dst_reg &dst, const src_reg &src0, \ const src_reg &src1, const src_reg &src2) \ { \ assert(devinfo->gen >= 6); \ return new(mem_ctx) vec4_instruction(BRW_OPCODE_##op, dst, \ src0, src1, src2); \ } ALU1(NOT) ALU1(MOV) ALU1(FRC) ALU1(RNDD) ALU1(RNDE) ALU1(RNDZ) ALU1(F32TO16) ALU1(F16TO32) ALU2(ADD) ALU2(MUL) ALU2_ACC(MACH) ALU2(AND) ALU2(OR) ALU2(XOR) ALU2(DP3) ALU2(DP4) ALU2(DPH) ALU2(SHL) ALU2(SHR) ALU2(ASR) ALU3(LRP) ALU1(BFREV) ALU3(BFE) ALU2(BFI1) ALU3(BFI2) ALU1(FBH) ALU1(FBL) ALU1(CBIT) ALU3(MAD) ALU2_ACC(ADDC) ALU2_ACC(SUBB) ALU2(MAC) ALU1(DIM) /** Gen4 predicated IF. */ vec4_instruction * vec4_visitor::IF(enum brw_predicate predicate) { vec4_instruction *inst; inst = new(mem_ctx) vec4_instruction(BRW_OPCODE_IF); inst->predicate = predicate; return inst; } /** Gen6 IF with embedded comparison. */ vec4_instruction * vec4_visitor::IF(src_reg src0, src_reg src1, enum brw_conditional_mod condition) { assert(devinfo->gen == 6); vec4_instruction *inst; resolve_ud_negate(&src0); resolve_ud_negate(&src1); inst = new(mem_ctx) vec4_instruction(BRW_OPCODE_IF, dst_null_d(), src0, src1); inst->conditional_mod = condition; return inst; } /** * CMP: Sets the low bit of the destination channels with the result * of the comparison, while the upper bits are undefined, and updates * the flag register with the packed 16 bits of the result. */ vec4_instruction * vec4_visitor::CMP(dst_reg dst, src_reg src0, src_reg src1, enum brw_conditional_mod condition) { vec4_instruction *inst; /* Take the instruction: * * CMP null src0 src1 * * Original gen4 does type conversion to the destination type before * comparison, producing garbage results for floating point comparisons. * * The destination type doesn't matter on newer generations, so we set the * type to match src0 so we can compact the instruction. */ dst.type = src0.type; resolve_ud_negate(&src0); resolve_ud_negate(&src1); inst = new(mem_ctx) vec4_instruction(BRW_OPCODE_CMP, dst, src0, src1); inst->conditional_mod = condition; return inst; } vec4_instruction * vec4_visitor::SCRATCH_READ(const dst_reg &dst, const src_reg &index) { vec4_instruction *inst; inst = new(mem_ctx) vec4_instruction(SHADER_OPCODE_GEN4_SCRATCH_READ, dst, index); inst->base_mrf = FIRST_SPILL_MRF(devinfo->gen) + 1; inst->mlen = 2; return inst; } vec4_instruction * vec4_visitor::SCRATCH_WRITE(const dst_reg &dst, const src_reg &src, const src_reg &index) { vec4_instruction *inst; inst = new(mem_ctx) vec4_instruction(SHADER_OPCODE_GEN4_SCRATCH_WRITE, dst, src, index); inst->base_mrf = FIRST_SPILL_MRF(devinfo->gen); inst->mlen = 3; return inst; } src_reg vec4_visitor::fix_3src_operand(const src_reg &src) { /* Using vec4 uniforms in SIMD4x2 programs is difficult. You'd like to be * able to use vertical stride of zero to replicate the vec4 uniform, like * * g3<0;4,1>:f - [0, 4][1, 5][2, 6][3, 7] * * But you can't, since vertical stride is always four in three-source * instructions. Instead, insert a MOV instruction to do the replication so * that the three-source instruction can consume it. */ /* The MOV is only needed if the source is a uniform or immediate. */ if (src.file != UNIFORM && src.file != IMM) return src; if (src.file == UNIFORM && brw_is_single_value_swizzle(src.swizzle)) return src; dst_reg expanded = dst_reg(this, glsl_type::vec4_type); expanded.type = src.type; emit(VEC4_OPCODE_UNPACK_UNIFORM, expanded, src); return src_reg(expanded); } src_reg vec4_visitor::fix_math_operand(const src_reg &src) { if (devinfo->gen < 6 || src.file == BAD_FILE) return src; /* The gen6 math instruction ignores the source modifiers -- * swizzle, abs, negate, and at least some parts of the register * region description. * * Rather than trying to enumerate all these cases, *always* expand the * operand to a temp GRF for gen6. * * For gen7, keep the operand as-is, except if immediate, which gen7 still * can't use. */ if (devinfo->gen == 7 && src.file != IMM) return src; dst_reg expanded = dst_reg(this, glsl_type::vec4_type); expanded.type = src.type; emit(MOV(expanded, src)); return src_reg(expanded); } vec4_instruction * vec4_visitor::emit_math(enum opcode opcode, const dst_reg &dst, const src_reg &src0, const src_reg &src1) { vec4_instruction *math = emit(opcode, dst, fix_math_operand(src0), fix_math_operand(src1)); if (devinfo->gen == 6 && dst.writemask != WRITEMASK_XYZW) { /* MATH on Gen6 must be align1, so we can't do writemasks. */ math->dst = dst_reg(this, glsl_type::vec4_type); math->dst.type = dst.type; math = emit(MOV(dst, src_reg(math->dst))); } else if (devinfo->gen < 6) { math->base_mrf = 1; math->mlen = src1.file == BAD_FILE ? 1 : 2; } return math; } void vec4_visitor::emit_pack_half_2x16(dst_reg dst, src_reg src0) { if (devinfo->gen < 7) { unreachable("ir_unop_pack_half_2x16 should be lowered"); } assert(dst.type == BRW_REGISTER_TYPE_UD); assert(src0.type == BRW_REGISTER_TYPE_F); /* From the Ivybridge PRM, Vol4, Part3, Section 6.27 f32to16: * * Because this instruction does not have a 16-bit floating-point type, * the destination data type must be Word (W). * * The destination must be DWord-aligned and specify a horizontal stride * (HorzStride) of 2. The 16-bit result is stored in the lower word of * each destination channel and the upper word is not modified. * * The above restriction implies that the f32to16 instruction must use * align1 mode, because only in align1 mode is it possible to specify * horizontal stride. We choose here to defy the hardware docs and emit * align16 instructions. * * (I [chadv] did attempt to emit align1 instructions for VS f32to16 * instructions. I was partially successful in that the code passed all * tests. However, the code was dubiously correct and fragile, and the * tests were not harsh enough to probe that frailty. Not trusting the * code, I chose instead to remain in align16 mode in defiance of the hw * docs). * * I've [chadv] experimentally confirmed that, on gen7 hardware and the * simulator, emitting a f32to16 in align16 mode with UD as destination * data type is safe. The behavior differs from that specified in the PRM * in that the upper word of each destination channel is cleared to 0. */ dst_reg tmp_dst(this, glsl_type::uvec2_type); src_reg tmp_src(tmp_dst); #if 0 /* Verify the undocumented behavior on which the following instructions * rely. If f32to16 fails to clear the upper word of the X and Y channels, * then the result of the bit-or instruction below will be incorrect. * * You should inspect the disasm output in order to verify that the MOV is * not optimized away. */ emit(MOV(tmp_dst, brw_imm_ud(0x12345678u))); #endif /* Give tmp the form below, where "." means untouched. * * w z y x w z y x * |.|.|0x0000hhhh|0x0000llll|.|.|0x0000hhhh|0x0000llll| * * That the upper word of each write-channel be 0 is required for the * following bit-shift and bit-or instructions to work. Note that this * relies on the undocumented hardware behavior mentioned above. */ tmp_dst.writemask = WRITEMASK_XY; emit(F32TO16(tmp_dst, src0)); /* Give the write-channels of dst the form: * 0xhhhh0000 */ tmp_src.swizzle = BRW_SWIZZLE_YYYY; emit(SHL(dst, tmp_src, brw_imm_ud(16u))); /* Finally, give the write-channels of dst the form of packHalf2x16's * output: * 0xhhhhllll */ tmp_src.swizzle = BRW_SWIZZLE_XXXX; emit(OR(dst, src_reg(dst), tmp_src)); } void vec4_visitor::emit_unpack_half_2x16(dst_reg dst, src_reg src0) { if (devinfo->gen < 7) { unreachable("ir_unop_unpack_half_2x16 should be lowered"); } assert(dst.type == BRW_REGISTER_TYPE_F); assert(src0.type == BRW_REGISTER_TYPE_UD); /* From the Ivybridge PRM, Vol4, Part3, Section 6.26 f16to32: * * Because this instruction does not have a 16-bit floating-point type, * the source data type must be Word (W). The destination type must be * F (Float). * * To use W as the source data type, we must adjust horizontal strides, * which is only possible in align1 mode. All my [chadv] attempts at * emitting align1 instructions for unpackHalf2x16 failed to pass the * Piglit tests, so I gave up. * * I've verified that, on gen7 hardware and the simulator, it is safe to * emit f16to32 in align16 mode with UD as source data type. */ dst_reg tmp_dst(this, glsl_type::uvec2_type); src_reg tmp_src(tmp_dst); tmp_dst.writemask = WRITEMASK_X; emit(AND(tmp_dst, src0, brw_imm_ud(0xffffu))); tmp_dst.writemask = WRITEMASK_Y; emit(SHR(tmp_dst, src0, brw_imm_ud(16u))); dst.writemask = WRITEMASK_XY; emit(F16TO32(dst, tmp_src)); } void vec4_visitor::emit_unpack_unorm_4x8(const dst_reg &dst, src_reg src0) { /* Instead of splitting the 32-bit integer, shifting, and ORing it back * together, we can shift it by <0, 8, 16, 24>. The packed integer immediate * is not suitable to generate the shift values, but we can use the packed * vector float and a type-converting MOV. */ dst_reg shift(this, glsl_type::uvec4_type); emit(MOV(shift, brw_imm_vf4(0x00, 0x60, 0x70, 0x78))); dst_reg shifted(this, glsl_type::uvec4_type); src0.swizzle = BRW_SWIZZLE_XXXX; emit(SHR(shifted, src0, src_reg(shift))); shifted.type = BRW_REGISTER_TYPE_UB; dst_reg f(this, glsl_type::vec4_type); emit(VEC4_OPCODE_MOV_BYTES, f, src_reg(shifted)); emit(MUL(dst, src_reg(f), brw_imm_f(1.0f / 255.0f))); } void vec4_visitor::emit_unpack_snorm_4x8(const dst_reg &dst, src_reg src0) { /* Instead of splitting the 32-bit integer, shifting, and ORing it back * together, we can shift it by <0, 8, 16, 24>. The packed integer immediate * is not suitable to generate the shift values, but we can use the packed * vector float and a type-converting MOV. */ dst_reg shift(this, glsl_type::uvec4_type); emit(MOV(shift, brw_imm_vf4(0x00, 0x60, 0x70, 0x78))); dst_reg shifted(this, glsl_type::uvec4_type); src0.swizzle = BRW_SWIZZLE_XXXX; emit(SHR(shifted, src0, src_reg(shift))); shifted.type = BRW_REGISTER_TYPE_B; dst_reg f(this, glsl_type::vec4_type); emit(VEC4_OPCODE_MOV_BYTES, f, src_reg(shifted)); dst_reg scaled(this, glsl_type::vec4_type); emit(MUL(scaled, src_reg(f), brw_imm_f(1.0f / 127.0f))); dst_reg max(this, glsl_type::vec4_type); emit_minmax(BRW_CONDITIONAL_GE, max, src_reg(scaled), brw_imm_f(-1.0f)); emit_minmax(BRW_CONDITIONAL_L, dst, src_reg(max), brw_imm_f(1.0f)); } void vec4_visitor::emit_pack_unorm_4x8(const dst_reg &dst, const src_reg &src0) { dst_reg saturated(this, glsl_type::vec4_type); vec4_instruction *inst = emit(MOV(saturated, src0)); inst->saturate = true; dst_reg scaled(this, glsl_type::vec4_type); emit(MUL(scaled, src_reg(saturated), brw_imm_f(255.0f))); dst_reg rounded(this, glsl_type::vec4_type); emit(RNDE(rounded, src_reg(scaled))); dst_reg u(this, glsl_type::uvec4_type); emit(MOV(u, src_reg(rounded))); src_reg bytes(u); emit(VEC4_OPCODE_PACK_BYTES, dst, bytes); } void vec4_visitor::emit_pack_snorm_4x8(const dst_reg &dst, const src_reg &src0) { dst_reg max(this, glsl_type::vec4_type); emit_minmax(BRW_CONDITIONAL_GE, max, src0, brw_imm_f(-1.0f)); dst_reg min(this, glsl_type::vec4_type); emit_minmax(BRW_CONDITIONAL_L, min, src_reg(max), brw_imm_f(1.0f)); dst_reg scaled(this, glsl_type::vec4_type); emit(MUL(scaled, src_reg(min), brw_imm_f(127.0f))); dst_reg rounded(this, glsl_type::vec4_type); emit(RNDE(rounded, src_reg(scaled))); dst_reg i(this, glsl_type::ivec4_type); emit(MOV(i, src_reg(rounded))); src_reg bytes(i); emit(VEC4_OPCODE_PACK_BYTES, dst, bytes); } /* * Returns the minimum number of vec4 (as_vec4 == true) or dvec4 (as_vec4 == * false) elements needed to pack a type. */ static int type_size_xvec4(const struct glsl_type *type, bool as_vec4, bool bindless) { unsigned int i; int size; switch (type->base_type) { case GLSL_TYPE_UINT: case GLSL_TYPE_INT: case GLSL_TYPE_FLOAT: case GLSL_TYPE_FLOAT16: case GLSL_TYPE_BOOL: case GLSL_TYPE_DOUBLE: case GLSL_TYPE_UINT16: case GLSL_TYPE_INT16: case GLSL_TYPE_UINT8: case GLSL_TYPE_INT8: case GLSL_TYPE_UINT64: case GLSL_TYPE_INT64: if (type->is_matrix()) { const glsl_type *col_type = type->column_type(); unsigned col_slots = (as_vec4 && col_type->is_dual_slot()) ? 2 : 1; return type->matrix_columns * col_slots; } else { /* Regardless of size of vector, it gets a vec4. This is bad * packing for things like floats, but otherwise arrays become a * mess. Hopefully a later pass over the code can pack scalars * down if appropriate. */ return (as_vec4 && type->is_dual_slot()) ? 2 : 1; } case GLSL_TYPE_ARRAY: assert(type->length > 0); return type_size_xvec4(type->fields.array, as_vec4, bindless) * type->length; case GLSL_TYPE_STRUCT: case GLSL_TYPE_INTERFACE: size = 0; for (i = 0; i < type->length; i++) { size += type_size_xvec4(type->fields.structure[i].type, as_vec4, bindless); } return size; case GLSL_TYPE_SUBROUTINE: return 1; case GLSL_TYPE_SAMPLER: /* Samplers take up no register space, since they're baked in at * link time. */ return bindless ? 1 : 0; case GLSL_TYPE_ATOMIC_UINT: return 0; case GLSL_TYPE_IMAGE: return bindless ? 1 : DIV_ROUND_UP(BRW_IMAGE_PARAM_SIZE, 4); case GLSL_TYPE_VOID: case GLSL_TYPE_ERROR: case GLSL_TYPE_FUNCTION: unreachable("not reached"); } return 0; } /** * Returns the minimum number of vec4 elements needed to pack a type. * * For simple types, it will return 1 (a single vec4); for matrices, the * number of columns; for array and struct, the sum of the vec4_size of * each of its elements; and for sampler and atomic, zero. * * This method is useful to calculate how much register space is needed to * store a particular type. */ extern "C" int type_size_vec4(const struct glsl_type *type, bool bindless) { return type_size_xvec4(type, true, bindless); } /** * Returns the minimum number of dvec4 elements needed to pack a type. * * For simple types, it will return 1 (a single dvec4); for matrices, the * number of columns; for array and struct, the sum of the dvec4_size of * each of its elements; and for sampler and atomic, zero. * * This method is useful to calculate how much register space is needed to * store a particular type. * * Measuring double-precision vertex inputs as dvec4 is required because * ARB_vertex_attrib_64bit states that these uses the same number of locations * than the single-precision version. That is, two consecutives dvec4 would be * located in location "x" and location "x+1", not "x+2". * * In order to map vec4/dvec4 vertex inputs in the proper ATTRs, * remap_vs_attrs() will take in account both the location and also if the * type fits in one or two vec4 slots. */ extern "C" int type_size_dvec4(const struct glsl_type *type, bool bindless) { return type_size_xvec4(type, false, bindless); } src_reg::src_reg(class vec4_visitor *v, const struct glsl_type *type) { init(); this->file = VGRF; this->nr = v->alloc.allocate(type_size_vec4(type, false)); if (type->is_array() || type->is_struct()) { this->swizzle = BRW_SWIZZLE_NOOP; } else { this->swizzle = brw_swizzle_for_size(type->vector_elements); } this->type = brw_type_for_base_type(type); } src_reg::src_reg(class vec4_visitor *v, const struct glsl_type *type, int size) { assert(size > 0); init(); this->file = VGRF; this->nr = v->alloc.allocate(type_size_vec4(type, false) * size); this->swizzle = BRW_SWIZZLE_NOOP; this->type = brw_type_for_base_type(type); } dst_reg::dst_reg(class vec4_visitor *v, const struct glsl_type *type) { init(); this->file = VGRF; this->nr = v->alloc.allocate(type_size_vec4(type, false)); if (type->is_array() || type->is_struct()) { this->writemask = WRITEMASK_XYZW; } else { this->writemask = (1 << type->vector_elements) - 1; } this->type = brw_type_for_base_type(type); } vec4_instruction * vec4_visitor::emit_minmax(enum brw_conditional_mod conditionalmod, dst_reg dst, src_reg src0, src_reg src1) { vec4_instruction *inst = emit(BRW_OPCODE_SEL, dst, src0, src1); inst->conditional_mod = conditionalmod; return inst; } /** * Emits the instructions needed to perform a pull constant load. before_block * and before_inst can be NULL in which case the instruction will be appended * to the end of the instruction list. */ void vec4_visitor::emit_pull_constant_load_reg(dst_reg dst, src_reg surf_index, src_reg offset_reg, bblock_t *before_block, vec4_instruction *before_inst) { assert((before_inst == NULL && before_block == NULL) || (before_inst && before_block)); vec4_instruction *pull; if (devinfo->gen >= 7) { dst_reg grf_offset = dst_reg(this, glsl_type::uint_type); grf_offset.type = offset_reg.type; pull = MOV(grf_offset, offset_reg); if (before_inst) emit_before(before_block, before_inst, pull); else emit(pull); pull = new(mem_ctx) vec4_instruction(VS_OPCODE_PULL_CONSTANT_LOAD_GEN7, dst, surf_index, src_reg(grf_offset)); pull->mlen = 1; } else { pull = new(mem_ctx) vec4_instruction(VS_OPCODE_PULL_CONSTANT_LOAD, dst, surf_index, offset_reg); pull->base_mrf = FIRST_PULL_LOAD_MRF(devinfo->gen) + 1; pull->mlen = 1; } if (before_inst) emit_before(before_block, before_inst, pull); else emit(pull); } src_reg vec4_visitor::emit_uniformize(const src_reg &src) { const src_reg chan_index(this, glsl_type::uint_type); const dst_reg dst = retype(dst_reg(this, glsl_type::uint_type), src.type); emit(SHADER_OPCODE_FIND_LIVE_CHANNEL, dst_reg(chan_index)) ->force_writemask_all = true; emit(SHADER_OPCODE_BROADCAST, dst, src, chan_index) ->force_writemask_all = true; return src_reg(dst); } src_reg vec4_visitor::emit_mcs_fetch(const glsl_type *coordinate_type, src_reg coordinate, src_reg surface) { vec4_instruction *inst = new(mem_ctx) vec4_instruction(SHADER_OPCODE_TXF_MCS, dst_reg(this, glsl_type::uvec4_type)); inst->base_mrf = 2; inst->src[1] = surface; inst->src[2] = brw_imm_ud(0); /* sampler */ inst->mlen = 1; const int param_base = inst->base_mrf; /* parameters are: u, v, r, lod; lod will always be zero due to api restrictions */ int coord_mask = (1 << coordinate_type->vector_elements) - 1; int zero_mask = 0xf & ~coord_mask; emit(MOV(dst_reg(MRF, param_base, coordinate_type, coord_mask), coordinate)); emit(MOV(dst_reg(MRF, param_base, coordinate_type, zero_mask), brw_imm_d(0))); emit(inst); return src_reg(inst->dst); } bool vec4_visitor::is_high_sampler(src_reg sampler) { if (!devinfo->is_haswell) return false; return sampler.file != IMM || sampler.ud >= 16; } void vec4_visitor::emit_texture(ir_texture_opcode op, dst_reg dest, const glsl_type *dest_type, src_reg coordinate, int coord_components, src_reg shadow_comparator, src_reg lod, src_reg lod2, src_reg sample_index, uint32_t constant_offset, src_reg offset_value, src_reg mcs, uint32_t surface, src_reg surface_reg, src_reg sampler_reg) { enum opcode opcode; switch (op) { case ir_tex: opcode = SHADER_OPCODE_TXL; break; case ir_txl: opcode = SHADER_OPCODE_TXL; break; case ir_txd: opcode = SHADER_OPCODE_TXD; break; case ir_txf: opcode = SHADER_OPCODE_TXF; break; case ir_txf_ms: opcode = SHADER_OPCODE_TXF_CMS; break; case ir_txs: opcode = SHADER_OPCODE_TXS; break; case ir_tg4: opcode = offset_value.file != BAD_FILE ? SHADER_OPCODE_TG4_OFFSET : SHADER_OPCODE_TG4; break; case ir_query_levels: opcode = SHADER_OPCODE_TXS; break; case ir_texture_samples: opcode = SHADER_OPCODE_SAMPLEINFO; break; case ir_txb: unreachable("TXB is not valid for vertex shaders."); case ir_lod: unreachable("LOD is not valid for vertex shaders."); case ir_samples_identical: { /* There are some challenges implementing this for vec4, and it seems * unlikely to be used anyway. For now, just return false ways. */ emit(MOV(dest, brw_imm_ud(0u))); return; } default: unreachable("Unrecognized tex op"); } vec4_instruction *inst = new(mem_ctx) vec4_instruction(opcode, dest); inst->offset = constant_offset; /* The message header is necessary for: * - Gen4 (always) * - Texel offsets * - Gather channel selection * - Sampler indices too large to fit in a 4-bit value. * - Sampleinfo message - takes no parameters, but mlen = 0 is illegal */ inst->header_size = (devinfo->gen < 5 || inst->offset != 0 || op == ir_tg4 || op == ir_texture_samples || is_high_sampler(sampler_reg)) ? 1 : 0; inst->base_mrf = 2; inst->mlen = inst->header_size; inst->dst.writemask = WRITEMASK_XYZW; inst->shadow_compare = shadow_comparator.file != BAD_FILE; inst->src[1] = surface_reg; inst->src[2] = sampler_reg; /* MRF for the first parameter */ int param_base = inst->base_mrf + inst->header_size; if (op == ir_txs || op == ir_query_levels) { int writemask = devinfo->gen == 4 ? WRITEMASK_W : WRITEMASK_X; emit(MOV(dst_reg(MRF, param_base, lod.type, writemask), lod)); inst->mlen++; } else if (op == ir_texture_samples) { inst->dst.writemask = WRITEMASK_X; } else { /* Load the coordinate */ /* FINISHME: gl_clamp_mask and saturate */ int coord_mask = (1 << coord_components) - 1; int zero_mask = 0xf & ~coord_mask; emit(MOV(dst_reg(MRF, param_base, coordinate.type, coord_mask), coordinate)); inst->mlen++; if (zero_mask != 0) { emit(MOV(dst_reg(MRF, param_base, coordinate.type, zero_mask), brw_imm_d(0))); } /* Load the shadow comparator */ if (shadow_comparator.file != BAD_FILE && op != ir_txd && (op != ir_tg4 || offset_value.file == BAD_FILE)) { emit(MOV(dst_reg(MRF, param_base + 1, shadow_comparator.type, WRITEMASK_X), shadow_comparator)); inst->mlen++; } /* Load the LOD info */ if (op == ir_tex || op == ir_txl) { int mrf, writemask; if (devinfo->gen >= 5) { mrf = param_base + 1; if (shadow_comparator.file != BAD_FILE) { writemask = WRITEMASK_Y; /* mlen already incremented */ } else { writemask = WRITEMASK_X; inst->mlen++; } } else /* devinfo->gen == 4 */ { mrf = param_base; writemask = WRITEMASK_W; } emit(MOV(dst_reg(MRF, mrf, lod.type, writemask), lod)); } else if (op == ir_txf) { emit(MOV(dst_reg(MRF, param_base, lod.type, WRITEMASK_W), lod)); } else if (op == ir_txf_ms) { emit(MOV(dst_reg(MRF, param_base + 1, sample_index.type, WRITEMASK_X), sample_index)); if (devinfo->gen >= 7) { /* MCS data is in the first channel of `mcs`, but we need to get it into * the .y channel of the second vec4 of params, so replicate .x across * the whole vec4 and then mask off everything except .y */ mcs.swizzle = BRW_SWIZZLE_XXXX; emit(MOV(dst_reg(MRF, param_base + 1, glsl_type::uint_type, WRITEMASK_Y), mcs)); } inst->mlen++; } else if (op == ir_txd) { const brw_reg_type type = lod.type; if (devinfo->gen >= 5) { lod.swizzle = BRW_SWIZZLE4(SWIZZLE_X,SWIZZLE_X,SWIZZLE_Y,SWIZZLE_Y); lod2.swizzle = BRW_SWIZZLE4(SWIZZLE_X,SWIZZLE_X,SWIZZLE_Y,SWIZZLE_Y); emit(MOV(dst_reg(MRF, param_base + 1, type, WRITEMASK_XZ), lod)); emit(MOV(dst_reg(MRF, param_base + 1, type, WRITEMASK_YW), lod2)); inst->mlen++; if (dest_type->vector_elements == 3 || shadow_comparator.file != BAD_FILE) { lod.swizzle = BRW_SWIZZLE_ZZZZ; lod2.swizzle = BRW_SWIZZLE_ZZZZ; emit(MOV(dst_reg(MRF, param_base + 2, type, WRITEMASK_X), lod)); emit(MOV(dst_reg(MRF, param_base + 2, type, WRITEMASK_Y), lod2)); inst->mlen++; if (shadow_comparator.file != BAD_FILE) { emit(MOV(dst_reg(MRF, param_base + 2, shadow_comparator.type, WRITEMASK_Z), shadow_comparator)); } } } else /* devinfo->gen == 4 */ { emit(MOV(dst_reg(MRF, param_base + 1, type, WRITEMASK_XYZ), lod)); emit(MOV(dst_reg(MRF, param_base + 2, type, WRITEMASK_XYZ), lod2)); inst->mlen += 2; } } else if (op == ir_tg4 && offset_value.file != BAD_FILE) { if (shadow_comparator.file != BAD_FILE) { emit(MOV(dst_reg(MRF, param_base, shadow_comparator.type, WRITEMASK_W), shadow_comparator)); } emit(MOV(dst_reg(MRF, param_base + 1, glsl_type::ivec2_type, WRITEMASK_XY), offset_value)); inst->mlen++; } } emit(inst); /* fixup num layers (z) for cube arrays: hardware returns faces * layers; * spec requires layers. */ if (op == ir_txs && devinfo->gen < 7) { /* Gen4-6 return 0 instead of 1 for single layer surfaces. */ emit_minmax(BRW_CONDITIONAL_GE, writemask(inst->dst, WRITEMASK_Z), src_reg(inst->dst), brw_imm_d(1)); } if (devinfo->gen == 6 && op == ir_tg4) { emit_gen6_gather_wa(key_tex->gen6_gather_wa[surface], inst->dst); } if (op == ir_query_levels) { /* # levels is in .w */ src_reg swizzled(dest); swizzled.swizzle = BRW_SWIZZLE4(SWIZZLE_W, SWIZZLE_W, SWIZZLE_W, SWIZZLE_W); emit(MOV(dest, swizzled)); } } /** * Apply workarounds for Gen6 gather with UINT/SINT */ void vec4_visitor::emit_gen6_gather_wa(uint8_t wa, dst_reg dst) { if (!wa) return; int width = (wa & WA_8BIT) ? 8 : 16; dst_reg dst_f = dst; dst_f.type = BRW_REGISTER_TYPE_F; /* Convert from UNORM to UINT */ emit(MUL(dst_f, src_reg(dst_f), brw_imm_f((float)((1 << width) - 1)))); emit(MOV(dst, src_reg(dst_f))); if (wa & WA_SIGN) { /* Reinterpret the UINT value as a signed INT value by * shifting the sign bit into place, then shifting back * preserving sign. */ emit(SHL(dst, src_reg(dst), brw_imm_d(32 - width))); emit(ASR(dst, src_reg(dst), brw_imm_d(32 - width))); } } void vec4_visitor::gs_emit_vertex(int /* stream_id */) { unreachable("not reached"); } void vec4_visitor::gs_end_primitive() { unreachable("not reached"); } void vec4_visitor::emit_ndc_computation() { if (output_reg[VARYING_SLOT_POS][0].file == BAD_FILE) return; /* Get the position */ src_reg pos = src_reg(output_reg[VARYING_SLOT_POS][0]); /* Build ndc coords, which are (x/w, y/w, z/w, 1/w) */ dst_reg ndc = dst_reg(this, glsl_type::vec4_type); output_reg[BRW_VARYING_SLOT_NDC][0] = ndc; output_num_components[BRW_VARYING_SLOT_NDC][0] = 4; current_annotation = "NDC"; dst_reg ndc_w = ndc; ndc_w.writemask = WRITEMASK_W; src_reg pos_w = pos; pos_w.swizzle = BRW_SWIZZLE4(SWIZZLE_W, SWIZZLE_W, SWIZZLE_W, SWIZZLE_W); emit_math(SHADER_OPCODE_RCP, ndc_w, pos_w); dst_reg ndc_xyz = ndc; ndc_xyz.writemask = WRITEMASK_XYZ; emit(MUL(ndc_xyz, pos, src_reg(ndc_w))); } void vec4_visitor::emit_psiz_and_flags(dst_reg reg) { if (devinfo->gen < 6 && ((prog_data->vue_map.slots_valid & VARYING_BIT_PSIZ) || output_reg[VARYING_SLOT_CLIP_DIST0][0].file != BAD_FILE || devinfo->has_negative_rhw_bug)) { dst_reg header1 = dst_reg(this, glsl_type::uvec4_type); dst_reg header1_w = header1; header1_w.writemask = WRITEMASK_W; emit(MOV(header1, brw_imm_ud(0u))); if (prog_data->vue_map.slots_valid & VARYING_BIT_PSIZ) { src_reg psiz = src_reg(output_reg[VARYING_SLOT_PSIZ][0]); current_annotation = "Point size"; emit(MUL(header1_w, psiz, brw_imm_f((float)(1 << 11)))); emit(AND(header1_w, src_reg(header1_w), brw_imm_d(0x7ff << 8))); } if (output_reg[VARYING_SLOT_CLIP_DIST0][0].file != BAD_FILE) { current_annotation = "Clipping flags"; dst_reg flags0 = dst_reg(this, glsl_type::uint_type); emit(CMP(dst_null_f(), src_reg(output_reg[VARYING_SLOT_CLIP_DIST0][0]), brw_imm_f(0.0f), BRW_CONDITIONAL_L)); emit(VS_OPCODE_UNPACK_FLAGS_SIMD4X2, flags0, brw_imm_d(0)); emit(OR(header1_w, src_reg(header1_w), src_reg(flags0))); } if (output_reg[VARYING_SLOT_CLIP_DIST1][0].file != BAD_FILE) { dst_reg flags1 = dst_reg(this, glsl_type::uint_type); emit(CMP(dst_null_f(), src_reg(output_reg[VARYING_SLOT_CLIP_DIST1][0]), brw_imm_f(0.0f), BRW_CONDITIONAL_L)); emit(VS_OPCODE_UNPACK_FLAGS_SIMD4X2, flags1, brw_imm_d(0)); emit(SHL(flags1, src_reg(flags1), brw_imm_d(4))); emit(OR(header1_w, src_reg(header1_w), src_reg(flags1))); } /* i965 clipping workaround: * 1) Test for -ve rhw * 2) If set, * set ndc = (0,0,0,0) * set ucp[6] = 1 * * Later, clipping will detect ucp[6] and ensure the primitive is * clipped against all fixed planes. */ if (devinfo->has_negative_rhw_bug && output_reg[BRW_VARYING_SLOT_NDC][0].file != BAD_FILE) { src_reg ndc_w = src_reg(output_reg[BRW_VARYING_SLOT_NDC][0]); ndc_w.swizzle = BRW_SWIZZLE_WWWW; emit(CMP(dst_null_f(), ndc_w, brw_imm_f(0.0f), BRW_CONDITIONAL_L)); vec4_instruction *inst; inst = emit(OR(header1_w, src_reg(header1_w), brw_imm_ud(1u << 6))); inst->predicate = BRW_PREDICATE_NORMAL; output_reg[BRW_VARYING_SLOT_NDC][0].type = BRW_REGISTER_TYPE_F; inst = emit(MOV(output_reg[BRW_VARYING_SLOT_NDC][0], brw_imm_f(0.0f))); inst->predicate = BRW_PREDICATE_NORMAL; } emit(MOV(retype(reg, BRW_REGISTER_TYPE_UD), src_reg(header1))); } else if (devinfo->gen < 6) { emit(MOV(retype(reg, BRW_REGISTER_TYPE_UD), brw_imm_ud(0u))); } else { emit(MOV(retype(reg, BRW_REGISTER_TYPE_D), brw_imm_d(0))); if (output_reg[VARYING_SLOT_PSIZ][0].file != BAD_FILE) { dst_reg reg_w = reg; reg_w.writemask = WRITEMASK_W; src_reg reg_as_src = src_reg(output_reg[VARYING_SLOT_PSIZ][0]); reg_as_src.type = reg_w.type; reg_as_src.swizzle = brw_swizzle_for_size(1); emit(MOV(reg_w, reg_as_src)); } if (output_reg[VARYING_SLOT_LAYER][0].file != BAD_FILE) { dst_reg reg_y = reg; reg_y.writemask = WRITEMASK_Y; reg_y.type = BRW_REGISTER_TYPE_D; output_reg[VARYING_SLOT_LAYER][0].type = reg_y.type; emit(MOV(reg_y, src_reg(output_reg[VARYING_SLOT_LAYER][0]))); } if (output_reg[VARYING_SLOT_VIEWPORT][0].file != BAD_FILE) { dst_reg reg_z = reg; reg_z.writemask = WRITEMASK_Z; reg_z.type = BRW_REGISTER_TYPE_D; output_reg[VARYING_SLOT_VIEWPORT][0].type = reg_z.type; emit(MOV(reg_z, src_reg(output_reg[VARYING_SLOT_VIEWPORT][0]))); } } } vec4_instruction * vec4_visitor::emit_generic_urb_slot(dst_reg reg, int varying, int component) { assert(varying < VARYING_SLOT_MAX); unsigned num_comps = output_num_components[varying][component]; if (num_comps == 0) return NULL; assert(output_reg[varying][component].type == reg.type); current_annotation = output_reg_annotation[varying]; if (output_reg[varying][component].file != BAD_FILE) { src_reg src = src_reg(output_reg[varying][component]); src.swizzle = BRW_SWZ_COMP_OUTPUT(component); reg.writemask = brw_writemask_for_component_packing(num_comps, component); return emit(MOV(reg, src)); } return NULL; } void vec4_visitor::emit_urb_slot(dst_reg reg, int varying) { reg.type = BRW_REGISTER_TYPE_F; output_reg[varying][0].type = reg.type; switch (varying) { case VARYING_SLOT_PSIZ: { /* PSIZ is always in slot 0, and is coupled with other flags. */ current_annotation = "indices, point width, clip flags"; emit_psiz_and_flags(reg); break; } case BRW_VARYING_SLOT_NDC: current_annotation = "NDC"; if (output_reg[BRW_VARYING_SLOT_NDC][0].file != BAD_FILE) emit(MOV(reg, src_reg(output_reg[BRW_VARYING_SLOT_NDC][0]))); break; case VARYING_SLOT_POS: current_annotation = "gl_Position"; if (output_reg[VARYING_SLOT_POS][0].file != BAD_FILE) emit(MOV(reg, src_reg(output_reg[VARYING_SLOT_POS][0]))); break; case VARYING_SLOT_EDGE: { /* This is present when doing unfilled polygons. We're supposed to copy * the edge flag from the user-provided vertex array * (glEdgeFlagPointer), or otherwise we'll copy from the current value * of that attribute (starts as 1.0f). This is then used in clipping to * determine which edges should be drawn as wireframe. */ current_annotation = "edge flag"; int edge_attr = util_bitcount64(nir->info.inputs_read & BITFIELD64_MASK(VERT_ATTRIB_EDGEFLAG)); emit(MOV(reg, src_reg(dst_reg(ATTR, edge_attr, glsl_type::float_type, WRITEMASK_XYZW)))); break; } case BRW_VARYING_SLOT_PAD: /* No need to write to this slot */ break; default: for (int i = 0; i < 4; i++) { emit_generic_urb_slot(reg, varying, i); } break; } } static unsigned align_interleaved_urb_mlen(const struct gen_device_info *devinfo, unsigned mlen) { if (devinfo->gen >= 6) { /* URB data written (does not include the message header reg) must * be a multiple of 256 bits, or 2 VS registers. See vol5c.5, * section 5.4.3.2.2: URB_INTERLEAVED. * * URB entries are allocated on a multiple of 1024 bits, so an * extra 128 bits written here to make the end align to 256 is * no problem. */ if ((mlen % 2) != 1) mlen++; } return mlen; } /** * Generates the VUE payload plus the necessary URB write instructions to * output it. * * The VUE layout is documented in Volume 2a. */ void vec4_visitor::emit_vertex() { /* MRF 0 is reserved for the debugger, so start with message header * in MRF 1. */ int base_mrf = 1; int mrf = base_mrf; /* In the process of generating our URB write message contents, we * may need to unspill a register or load from an array. Those * reads would use MRFs 14-15. */ int max_usable_mrf = FIRST_SPILL_MRF(devinfo->gen); /* The following assertion verifies that max_usable_mrf causes an * even-numbered amount of URB write data, which will meet gen6's * requirements for length alignment. */ assert ((max_usable_mrf - base_mrf) % 2 == 0); /* First mrf is the g0-based message header containing URB handles and * such. */ emit_urb_write_header(mrf++); if (devinfo->gen < 6) { emit_ndc_computation(); } /* We may need to split this up into several URB writes, so do them in a * loop. */ int slot = 0; bool complete = false; do { /* URB offset is in URB row increments, and each of our MRFs is half of * one of those, since we're doing interleaved writes. */ int offset = slot / 2; mrf = base_mrf + 1; for (; slot < prog_data->vue_map.num_slots; ++slot) { emit_urb_slot(dst_reg(MRF, mrf++), prog_data->vue_map.slot_to_varying[slot]); /* If this was max_usable_mrf, we can't fit anything more into this * URB WRITE. Same thing if we reached the maximum length available. */ if (mrf > max_usable_mrf || align_interleaved_urb_mlen(devinfo, mrf - base_mrf + 1) > BRW_MAX_MSG_LENGTH) { slot++; break; } } complete = slot >= prog_data->vue_map.num_slots; current_annotation = "URB write"; vec4_instruction *inst = emit_urb_write_opcode(complete); inst->base_mrf = base_mrf; inst->mlen = align_interleaved_urb_mlen(devinfo, mrf - base_mrf); inst->offset += offset; } while(!complete); } src_reg vec4_visitor::get_scratch_offset(bblock_t *block, vec4_instruction *inst, src_reg *reladdr, int reg_offset) { /* Because we store the values to scratch interleaved like our * vertex data, we need to scale the vec4 index by 2. */ int message_header_scale = 2; /* Pre-gen6, the message header uses byte offsets instead of vec4 * (16-byte) offset units. */ if (devinfo->gen < 6) message_header_scale *= 16; if (reladdr) { /* A vec4 is 16 bytes and a dvec4 is 32 bytes so for doubles we have * to multiply the reladdr by 2. Notice that the reg_offset part * is in units of 16 bytes and is used to select the low/high 16-byte * chunk of a full dvec4, so we don't want to multiply that part. */ src_reg index = src_reg(this, glsl_type::int_type); if (type_sz(inst->dst.type) < 8) { emit_before(block, inst, ADD(dst_reg(index), *reladdr, brw_imm_d(reg_offset))); emit_before(block, inst, MUL(dst_reg(index), index, brw_imm_d(message_header_scale))); } else { emit_before(block, inst, MUL(dst_reg(index), *reladdr, brw_imm_d(message_header_scale * 2))); emit_before(block, inst, ADD(dst_reg(index), index, brw_imm_d(reg_offset * message_header_scale))); } return index; } else { return brw_imm_d(reg_offset * message_header_scale); } } /** * Emits an instruction before @inst to load the value named by @orig_src * from scratch space at @base_offset to @temp. * * @base_offset is measured in 32-byte units (the size of a register). */ void vec4_visitor::emit_scratch_read(bblock_t *block, vec4_instruction *inst, dst_reg temp, src_reg orig_src, int base_offset) { assert(orig_src.offset % REG_SIZE == 0); int reg_offset = base_offset + orig_src.offset / REG_SIZE; src_reg index = get_scratch_offset(block, inst, orig_src.reladdr, reg_offset); if (type_sz(orig_src.type) < 8) { emit_before(block, inst, SCRATCH_READ(temp, index)); } else { dst_reg shuffled = dst_reg(this, glsl_type::dvec4_type); dst_reg shuffled_float = retype(shuffled, BRW_REGISTER_TYPE_F); emit_before(block, inst, SCRATCH_READ(shuffled_float, index)); index = get_scratch_offset(block, inst, orig_src.reladdr, reg_offset + 1); vec4_instruction *last_read = SCRATCH_READ(byte_offset(shuffled_float, REG_SIZE), index); emit_before(block, inst, last_read); shuffle_64bit_data(temp, src_reg(shuffled), false, block, last_read); } } /** * Emits an instruction after @inst to store the value to be written * to @orig_dst to scratch space at @base_offset, from @temp. * * @base_offset is measured in 32-byte units (the size of a register). */ void vec4_visitor::emit_scratch_write(bblock_t *block, vec4_instruction *inst, int base_offset) { assert(inst->dst.offset % REG_SIZE == 0); int reg_offset = base_offset + inst->dst.offset / REG_SIZE; src_reg index = get_scratch_offset(block, inst, inst->dst.reladdr, reg_offset); /* Create a temporary register to store *inst's result in. * * We have to be careful in MOVing from our temporary result register in * the scratch write. If we swizzle from channels of the temporary that * weren't initialized, it will confuse live interval analysis, which will * make spilling fail to make progress. */ bool is_64bit = type_sz(inst->dst.type) == 8; const glsl_type *alloc_type = is_64bit ? glsl_type::dvec4_type : glsl_type::vec4_type; const src_reg temp = swizzle(retype(src_reg(this, alloc_type), inst->dst.type), brw_swizzle_for_mask(inst->dst.writemask)); if (!is_64bit) { dst_reg dst = dst_reg(brw_writemask(brw_vec8_grf(0, 0), inst->dst.writemask)); vec4_instruction *write = SCRATCH_WRITE(dst, temp, index); if (inst->opcode != BRW_OPCODE_SEL) write->predicate = inst->predicate; write->ir = inst->ir; write->annotation = inst->annotation; inst->insert_after(block, write); } else { dst_reg shuffled = dst_reg(this, alloc_type); vec4_instruction *last = shuffle_64bit_data(shuffled, temp, true, block, inst); src_reg shuffled_float = src_reg(retype(shuffled, BRW_REGISTER_TYPE_F)); uint8_t mask = 0; if (inst->dst.writemask & WRITEMASK_X) mask |= WRITEMASK_XY; if (inst->dst.writemask & WRITEMASK_Y) mask |= WRITEMASK_ZW; if (mask) { dst_reg dst = dst_reg(brw_writemask(brw_vec8_grf(0, 0), mask)); vec4_instruction *write = SCRATCH_WRITE(dst, shuffled_float, index); if (inst->opcode != BRW_OPCODE_SEL) write->predicate = inst->predicate; write->ir = inst->ir; write->annotation = inst->annotation; last->insert_after(block, write); } mask = 0; if (inst->dst.writemask & WRITEMASK_Z) mask |= WRITEMASK_XY; if (inst->dst.writemask & WRITEMASK_W) mask |= WRITEMASK_ZW; if (mask) { dst_reg dst = dst_reg(brw_writemask(brw_vec8_grf(0, 0), mask)); src_reg index = get_scratch_offset(block, inst, inst->dst.reladdr, reg_offset + 1); vec4_instruction *write = SCRATCH_WRITE(dst, byte_offset(shuffled_float, REG_SIZE), index); if (inst->opcode != BRW_OPCODE_SEL) write->predicate = inst->predicate; write->ir = inst->ir; write->annotation = inst->annotation; last->insert_after(block, write); } } inst->dst.file = temp.file; inst->dst.nr = temp.nr; inst->dst.offset %= REG_SIZE; inst->dst.reladdr = NULL; } /** * Checks if \p src and/or \p src.reladdr require a scratch read, and if so, * adds the scratch read(s) before \p inst. The function also checks for * recursive reladdr scratch accesses, issuing the corresponding scratch * loads and rewriting reladdr references accordingly. * * \return \p src if it did not require a scratch load, otherwise, the * register holding the result of the scratch load that the caller should * use to rewrite src. */ src_reg vec4_visitor::emit_resolve_reladdr(int scratch_loc[], bblock_t *block, vec4_instruction *inst, src_reg src) { /* Resolve recursive reladdr scratch access by calling ourselves * with src.reladdr */ if (src.reladdr) *src.reladdr = emit_resolve_reladdr(scratch_loc, block, inst, *src.reladdr); /* Now handle scratch access on src */ if (src.file == VGRF && scratch_loc[src.nr] != -1) { dst_reg temp = dst_reg(this, type_sz(src.type) == 8 ? glsl_type::dvec4_type : glsl_type::vec4_type); emit_scratch_read(block, inst, temp, src, scratch_loc[src.nr]); src.nr = temp.nr; src.offset %= REG_SIZE; src.reladdr = NULL; } return src; } /** * We can't generally support array access in GRF space, because a * single instruction's destination can only span 2 contiguous * registers. So, we send all GRF arrays that get variable index * access to scratch space. */ void vec4_visitor::move_grf_array_access_to_scratch() { int scratch_loc[this->alloc.count]; memset(scratch_loc, -1, sizeof(scratch_loc)); /* First, calculate the set of virtual GRFs that need to be punted * to scratch due to having any array access on them, and where in * scratch. */ foreach_block_and_inst(block, vec4_instruction, inst, cfg) { if (inst->dst.file == VGRF && inst->dst.reladdr) { if (scratch_loc[inst->dst.nr] == -1) { scratch_loc[inst->dst.nr] = last_scratch; last_scratch += this->alloc.sizes[inst->dst.nr]; } for (src_reg *iter = inst->dst.reladdr; iter->reladdr; iter = iter->reladdr) { if (iter->file == VGRF && scratch_loc[iter->nr] == -1) { scratch_loc[iter->nr] = last_scratch; last_scratch += this->alloc.sizes[iter->nr]; } } } for (int i = 0 ; i < 3; i++) { for (src_reg *iter = &inst->src[i]; iter->reladdr; iter = iter->reladdr) { if (iter->file == VGRF && scratch_loc[iter->nr] == -1) { scratch_loc[iter->nr] = last_scratch; last_scratch += this->alloc.sizes[iter->nr]; } } } } /* Now, for anything that will be accessed through scratch, rewrite * it to load/store. Note that this is a _safe list walk, because * we may generate a new scratch_write instruction after the one * we're processing. */ foreach_block_and_inst_safe(block, vec4_instruction, inst, cfg) { /* Set up the annotation tracking for new generated instructions. */ base_ir = inst->ir; current_annotation = inst->annotation; /* First handle scratch access on the dst. Notice we have to handle * the case where the dst's reladdr also points to scratch space. */ if (inst->dst.reladdr) *inst->dst.reladdr = emit_resolve_reladdr(scratch_loc, block, inst, *inst->dst.reladdr); /* Now that we have handled any (possibly recursive) reladdr scratch * accesses for dst we can safely do the scratch write for dst itself */ if (inst->dst.file == VGRF && scratch_loc[inst->dst.nr] != -1) emit_scratch_write(block, inst, scratch_loc[inst->dst.nr]); /* Now handle scratch access on any src. In this case, since inst->src[i] * already is a src_reg, we can just call emit_resolve_reladdr with * inst->src[i] and it will take care of handling scratch loads for * both src and src.reladdr (recursively). */ for (int i = 0 ; i < 3; i++) { inst->src[i] = emit_resolve_reladdr(scratch_loc, block, inst, inst->src[i]); } } } /** * Emits an instruction before @inst to load the value named by @orig_src * from the pull constant buffer (surface) at @base_offset to @temp. */ void vec4_visitor::emit_pull_constant_load(bblock_t *block, vec4_instruction *inst, dst_reg temp, src_reg orig_src, int base_offset, src_reg indirect) { assert(orig_src.offset % 16 == 0); const unsigned index = prog_data->base.binding_table.pull_constants_start; /* For 64bit loads we need to emit two 32-bit load messages and we also * we need to shuffle the 32-bit data result into proper 64-bit data. To do * that we emit the 32-bit loads into a temporary and we shuffle the result * into the original destination. */ dst_reg orig_temp = temp; bool is_64bit = type_sz(orig_src.type) == 8; if (is_64bit) { assert(type_sz(temp.type) == 8); dst_reg temp_df = dst_reg(this, glsl_type::dvec4_type); temp = retype(temp_df, BRW_REGISTER_TYPE_F); } src_reg src = orig_src; for (int i = 0; i < (is_64bit ? 2 : 1); i++) { int reg_offset = base_offset + src.offset / 16; src_reg offset; if (indirect.file != BAD_FILE) { offset = src_reg(this, glsl_type::uint_type); emit_before(block, inst, ADD(dst_reg(offset), indirect, brw_imm_ud(reg_offset * 16))); } else { offset = brw_imm_d(reg_offset * 16); } emit_pull_constant_load_reg(byte_offset(temp, i * REG_SIZE), brw_imm_ud(index), offset, block, inst); src = byte_offset(src, 16); } if (is_64bit) { temp = retype(temp, BRW_REGISTER_TYPE_DF); shuffle_64bit_data(orig_temp, src_reg(temp), false, block, inst); } } /** * Implements array access of uniforms by inserting a * PULL_CONSTANT_LOAD instruction. * * Unlike temporary GRF array access (where we don't support it due to * the difficulty of doing relative addressing on instruction * destinations), we could potentially do array access of uniforms * that were loaded in GRF space as push constants. In real-world * usage we've seen, though, the arrays being used are always larger * than we could load as push constants, so just always move all * uniform array access out to a pull constant buffer. */ void vec4_visitor::move_uniform_array_access_to_pull_constants() { /* The vulkan dirver doesn't support pull constants other than UBOs so * everything has to be pushed regardless. */ if (!compiler->supports_pull_constants) { split_uniform_registers(); return; } /* Allocate the pull_params array */ assert(stage_prog_data->nr_pull_params == 0); stage_prog_data->pull_param = ralloc_array(mem_ctx, uint32_t, this->uniforms * 4); int pull_constant_loc[this->uniforms]; memset(pull_constant_loc, -1, sizeof(pull_constant_loc)); /* First, walk through the instructions and determine which things need to * be pulled. We mark something as needing to be pulled by setting * pull_constant_loc to 0. */ foreach_block_and_inst(block, vec4_instruction, inst, cfg) { /* We only care about MOV_INDIRECT of a uniform */ if (inst->opcode != SHADER_OPCODE_MOV_INDIRECT || inst->src[0].file != UNIFORM) continue; int uniform_nr = inst->src[0].nr + inst->src[0].offset / 16; for (unsigned j = 0; j < DIV_ROUND_UP(inst->src[2].ud, 16); j++) pull_constant_loc[uniform_nr + j] = 0; } /* Next, we walk the list of uniforms and assign real pull constant * locations and set their corresponding entries in pull_param. */ for (int j = 0; j < this->uniforms; j++) { if (pull_constant_loc[j] < 0) continue; pull_constant_loc[j] = stage_prog_data->nr_pull_params / 4; for (int i = 0; i < 4; i++) { stage_prog_data->pull_param[stage_prog_data->nr_pull_params++] = stage_prog_data->param[j * 4 + i]; } } /* Finally, we can walk through the instructions and lower MOV_INDIRECT * instructions to actual uniform pulls. */ foreach_block_and_inst_safe(block, vec4_instruction, inst, cfg) { /* We only care about MOV_INDIRECT of a uniform */ if (inst->opcode != SHADER_OPCODE_MOV_INDIRECT || inst->src[0].file != UNIFORM) continue; int uniform_nr = inst->src[0].nr + inst->src[0].offset / 16; assert(inst->src[0].swizzle == BRW_SWIZZLE_NOOP); emit_pull_constant_load(block, inst, inst->dst, inst->src[0], pull_constant_loc[uniform_nr], inst->src[1]); inst->remove(block); } /* Now there are no accesses of the UNIFORM file with a reladdr, so * no need to track them as larger-than-vec4 objects. This will be * relied on in cutting out unused uniform vectors from push * constants. */ split_uniform_registers(); } void vec4_visitor::resolve_ud_negate(src_reg *reg) { if (reg->type != BRW_REGISTER_TYPE_UD || !reg->negate) return; src_reg temp = src_reg(this, glsl_type::uvec4_type); emit(BRW_OPCODE_MOV, dst_reg(temp), *reg); *reg = temp; } vec4_visitor::vec4_visitor(const struct brw_compiler *compiler, void *log_data, const struct brw_sampler_prog_key_data *key_tex, struct brw_vue_prog_data *prog_data, const nir_shader *shader, void *mem_ctx, bool no_spills, int shader_time_index) : backend_shader(compiler, log_data, mem_ctx, shader, &prog_data->base), key_tex(key_tex), prog_data(prog_data), fail_msg(NULL), first_non_payload_grf(0), live_analysis(this), performance_analysis(this), need_all_constants_in_pull_buffer(false), no_spills(no_spills), shader_time_index(shader_time_index), last_scratch(0) { this->failed = false; this->base_ir = NULL; this->current_annotation = NULL; memset(this->output_reg_annotation, 0, sizeof(this->output_reg_annotation)); memset(this->output_num_components, 0, sizeof(this->output_num_components)); this->max_grf = devinfo->gen >= 7 ? GEN7_MRF_HACK_START : BRW_MAX_GRF; this->uniforms = 0; this->nir_locals = NULL; this->nir_ssa_values = NULL; } void vec4_visitor::fail(const char *format, ...) { va_list va; char *msg; if (failed) return; failed = true; va_start(va, format); msg = ralloc_vasprintf(mem_ctx, format, va); va_end(va); msg = ralloc_asprintf(mem_ctx, "%s compile failed: %s\n", stage_abbrev, msg); this->fail_msg = msg; if (debug_enabled) { fprintf(stderr, "%s", msg); } } } /* namespace brw */