Lines Matching refs:receiver

203          * The GNSS receiver internal clock value. This is the local hardware clock
209          * hwClockDiscontinuityCount field). The receiver's estimate of GNSS time
214          * that GNSS receiver can achieve.
235          * The difference between hardware clock ('time' field) inside GNSS receiver
241          * If receiver has computed time for a non-GPS constellation, the time offset of
248          * This value is mandatory if the receiver has estimated GPS time.
260          * This value is mandatory if the receiver has estimated GPS time.
274          * This value is mandatory if the receiver has estimated GPS time.
287          * This value is mandatory if the receiver has estimated GPS time.
298          * This value is mandatory if the receiver has estimated GPS time.
375          * The reference receiver's time is specified by GnssData::clock::timeNs.
495          * the receiver only processes one of the components, then the reported
504          * Pseudorange Rate value includes corrections for receiver and satellite
514          * the receiver.
548          * A positive value indicates that the SV is moving away from the receiver.
575          * For an L1, L5 receiver tracking a satellite on L1 and L5 at the same
588          * receiver. The reference frequency is given by the field
599          * The RF phase detected by the receiver, in the range [0.0, 1.0].
666      * request, when the GNSS receiver is searching/tracking signals.