Lines Matching refs:is
11 * distributed under the License is distributed on an "AS IS" BASIS,
23 * This interface is used by telephony & telecom to talk to cellular radio.
44 * Response function is IRadioResponse.getIccCardStatusResponse()
56 * Response function is IRadioResponse.supplyIccPinForAppResponse()
69 * Response function is IRadioResponse.supplyIccPukForAppResponse()
82 * Response function is IRadioResponse.supplyIccPin2ForAppResponse()
95 * Response function is IRadioResponse.supplyIccPuk2ForAppResponse()
109 * Response function is IRadioResponse.changeIccPinForAppResponse()
123 * Response function is IRadioResponse.changeIccPin2ForAppResponse()
135 * Response function is IRadioResponse.supplyNetworkDepersonalizationResponse()
145 * Response function is IRadioResponse.getCurrentCallsResponse()
152 * This method is never used for supplementary service codes
157 * Response function is IRadioResponse.dialResponse()
164 * Only valid when radio state is "RADIO_STATE_ON"
169 * Response function is IRadioResponse.getImsiForAppResponse()
176 * After this HANGUP request returns, Radio must show the connection is NOT
182 * Response function is IRadioResponse.hangupResponse()
189 * After this HANGUP request returns, Radio must show the connection is NOT
194 * Response function is IRadioResponse.hangupWaitingOrBackgroundResponse()
201 * After this HANGUP request returns, Radio must show the connection is NOT
206 * Response function is IRadioResponse.hangupForegroundResumeBackgroundResponse()
227 * Response function is IRadioResponse.switchWaitingOrHoldingAndActiveResponse()
237 * Response function is IRadioResponse.conferenceResponse()
248 * Response function is IRadioResponse.rejectCallResponse()
258 * Response function is IRadioResponse.getLastCallFailCauseResponse()
265 * Must succeed if radio is on.
269 * Response function is IRadioResponse.getSignalStrengthResponse()
278 * Response function is IRadioResponse.getVoiceRegistrationStateResponse()
287 * Response function is IRadioResponse.getDataRegistrationStateResponse()
296 * Response function is IRadioResponse.getOperatorResponse()
302 * If the radio is turned off/on the radio modem subsystem
303 * is expected return to an initialized state. For instance,
310 * Response function is IRadioResponse.setRadioPowerResponse()
317 * If the implementation is currently playing a tone requested via
324 * Response function is IRadioResponse.sendDtmfResponse()
334 * Response function is IRadioResponse.sendSmsResponse()
337 * fails. RadioError:SMS_SEND_FAIL_RETRY means retry (i.e. error cause is 332)
338 * and RadioError:GENERIC_FAILURE means no retry (i.e. error cause is 500)
350 * Response function is IRadioResponse.sendSMSExpectMoreResponse()
353 * fails. RadioError:SMS_SEND_FAIL_RETRY means retry (i.e. error cause is 332)
354 * and RadioError:GENERIC_FAILURE means no retry (i.e. error cause is 500)
360 * return DataCallFailCause:NONE it is added to the list of data calls and a
361 * unsolDataCallListChanged() is sent. The call remains in the
362 * list until deactivateDataCall() is issued or the
363 * radio is powered off/on. This list is returned by getDataCallList()
366 * The Radio is expected to:
370 * - The interface is configured with one or more addresses and
371 * is capable of sending and receiving packets. The prefix length
382 * @param roamingAllowed Indicating data roaming is allowed or not by the user.
383 * @param isRoaming Indicating the device is roaming or not. The 'protocol' parameter in the old
385 * Note this is for backward compatibility with the old radio modem. The modem
388 * Response function is IRadioResponse.setupDataCallResponse() which may return
389 * RadioError:REQUEST_NOT_SUPPORTED if @1.2::IRadio or higher is supported.
399 * This is similar to the TS 27.007 "restricted SIM" operation
413 * Response function is IRadioResponse.iccIOForAppResponse()
425 * Only one USSD session must exist at a time, and the session is assumed
434 * Response function is IRadioResponse.sendUssdResponse()
445 * Response function is IRadioResponse.cancelPendingUssdResponse()
454 * Response function is IRadioResponse.getClirResponse()
464 * Response function is IRadioResponse.setClirResponse()
474 * Response function is IRadioResponse.getCallForwardStatusResponse()
485 * Response function is IRadioResponse.setCallForwardResponse()
493 * @param serviceClass Service class is the TS 27.007 service class to query
495 * Response function is IRadioResponse.getCallWaitingResponse()
503 * @param enable is false for "disabled" and true for "enabled"
504 * @param serviceClass is the TS 27.007 service class bit vector of services to modify
506 * Response function is IRadioResponse.setCallWaitingResponse()
516 * @param success is true on successful receipt
517 * (basically, AT+CNMA=1 from TS 27.005 is 0 on failed receipt
519 * @param cause: if success is false, this contains the failure cause as defined
522 * Response function is IRadioResponse.acknowledgeLastIncomingGsmSmsResponse()
535 * Response function is IRadioResponse.acceptCallResponse()
541 * data call list if RadioError:NONE is returned. Any other return
552 * Response function is IRadioResponse.deactivateDataCallResponse() which may return
553 * RadioError:REQUEST_NOT_SUPPORTED if @1.2::IRadio or higher is supported.
564 * @param facility is the facility string code from TS 27.007 7.4
566 * @param password is the password, or "" if not required
567 * @param serviceClass is the TS 27.007 service class bit vector of services to query
568 * @param appId is AID value, See ETSI 102.221 8.1 and 101.220 4, empty string if no value.
569 * This is only applicable in the case of Fixed Dialing Numbers (FDN) requests.
571 * Response function is IRadioResponse.getFacilityLockForAppResponse()
580 * @param facility is the facility string code from TS 27.007 7.4 (eg "AO" for BAOC)
582 * @param password is the password
583 * @param serviceClass is string representation of decimal TS 27.007
586 * @param appId is AID value, See ETSI 102.221 8.1 and 101.220 4, empty string if no value.
587 * This is only applicable in the case of Fixed Dialing Numbers (FDN) requests.
589 * Response function is IRadioResponse.setFacilityLockForAppResponse()
602 * Response function is IRadioResponse.setBarringPasswordResponse()
612 * Response function is IRadioResponse.getNetworkSelectionModeResponse()
618 * This request must not respond until the new operator is selected and registered.
622 * Response function is IRadioResponse.setNetworkSelectionModeAutomaticResponse()
628 * This request must not respond until the new operator is selected and registered.
633 * Response function is IRadioResponse.setNetworkSelectionModeManualResponse()
642 * Response function is IRadioResponse.getAvailableNetworksResponse()
648 * stopDtmf is received.
649 * If a startDtmf() is received while a tone is currently playing,
655 * Response function is IRadioResponse.startDtmfResponse()
664 * Response function is IRadioResponse.stopDtmfResponse()
673 * Response function is IRadioResponse.getBasebandVersionResponse()
691 * Response function is IRadioResponse.separateConnectionResponse()
697 * Must only be sent while voice call is active.
698 * Must always be reset to "disable mute" when a new voice call is initiated
703 * Response function is IRadioResponse.setMuteResponse()
712 * Response function is IRadioResponse.getMuteResponse()
722 * Response function is IRadioResponse.getClipResponse()
727 * Returns the data call list. An entry is added when a
728 * setupDataCall() is issued and removed on a
729 * deactivateDataCall(). The list is emptied when
730 * setRadioPower() off/on is issued.
734 * Response function is IRadioResponse.getDataCallListResponse()
745 * Response function is IRadioResponse.setSuppServiceNotificationsResponse()
755 * Response function is IRadioResponse.writeSmsToSimResponse()
765 * Response function is IRadioResponse.deleteSmsOnSimResponse()
775 * Response function is IRadioResponse.setBandModeResponse()
784 * Response function is IRadioResponse.getAvailableBandModesResponse()
795 * Response function is IRadioResponse.sendEnvelopeResponse()
806 * Response function is IRadioResponse.sendTerminalResponseResponseToSim()
819 * Response callback is IRadioResponse.handleStkCallSetupRequestFromSimResponse()
829 * Response callback is IRadioResponse.explicitCallTransferResponse()
840 * Response callback is IRadioResponse.setPreferredNetworkTypeResponse()
851 * Response callback is IRadioResponse.getPreferredNetworkTypeResponse()
860 * Response callback is IRadioResponse.getNeighboringCidsResponse()
869 * when the screen is on and "updates disabled" when the screen is off.
874 * Response callback is IRadioResponse.setLocationUpdatesResponse()
885 * Response callback is IRadioResponse.setCdmaSubscriptionSourceResponse()
896 * Response callback is IRadioResponse.setCdmaRoamingPreferenceResponse()
906 * Response callback is IRadioResponse.getCdmaRoamingPreferenceResponse()
916 * Response callback is IRadioResponse.setTTYModeResponse()
925 * Response callback is IRadioResponse.getTTYModeResponse()
936 * Response callback is IRadioResponse.setPreferredVoicePrivacyResponse()
945 * Response callback is IRadioResponse.getPreferredVoicePrivacyResponse()
955 * Response callback is IRadioResponse.sendCDMAFeatureCodeResponse()
965 * @param off is the DTMF OFF length in milliseconds, or 0 to use default
967 * Response callback is IRadioResponse.sendBurstDtmfResponse()
977 * Response callback is IRadioResponse.sendCdmaSmsResponse()
988 * Response callback is IRadioResponse.acknowledgeLastIncomingCdmaSmsResponse()
997 * Response callback is IRadioResponse.getGsmBroadcastConfigResponse()
1007 * Response callback is IRadioResponse.setGsmBroadcastConfigResponse()
1018 * Response callback is IRadioResponse.setGsmBroadcastActivationResponse()
1027 * Response callback is IRadioResponse.getCdmaBroadcastConfigResponse()
1037 * Response callback is IRadioResponse.setCdmaBroadcastConfigResponse()
1048 * Response callback is IRadioResponse.setCdmaBroadcastActivationResponse()
1054 * The request is only allowed when CDMA subscription is available. When CDMA
1055 * subscription is changed, application layer must re-issue the request to
1060 * Response callback is IRadioResponse.getCDMASubscriptionResponse()
1070 * Response callback is IRadioResponse.writeSmsToRuimResponse()
1080 * Response callback is IRadioResponse.deleteSmsOnRuimResponse()
1086 * The request is always allowed and contains GSM and CDMA device identity.
1087 * When CDMA subscription is changed the ESN/MEID changes. The application
1092 * Response callback is IRadioResponse.getDeviceIdentityResponse()
1103 * Response callback is IRadioResponse.exitEmergencyCallbackModeResponse()
1112 * Response callback is IRadioResponse.getSmscAddressResponse()
1122 * Response callback is IRadioResponse.setSmscAddressResponse()
1127 * Indicates whether there is storage available for new SMS messages.
1130 * @param available true if memory is available for storing new messages,
1131 * false if memory capacity is exceeded
1133 * Response callback is IRadioResponse.reportSmsMemoryStatusResponse()
1138 * Indicates that the StkService is running and is
1143 * Response callback is IRadioResponse.reportStkServiceIsRunningResponse()
1152 * Response callback is IRadioResponse.getCdmaSubscriptionSourceResponse()
1163 * Response callback is IRadioResponse.requestIsimAuthenticationResponse()
1177 * Response callback is IRadioResponse.acknowledgeIncomingGsmSmsWithPduResponse()
1196 * Response callback is IRadioResponse.sendEnvelopeWithStatusResponse()
1201 * Query the radio technology type (3GPP/3GPP2) used for voice. Query is valid only
1202 * when radio state is not RADIO_STATE_UNAVAILABLE
1206 * Response callback is IRadioResponse.getVoiceRadioTechnologyResponse()
1218 * Response callback is IRadioResponse.getCellInfoListResponse()
1231 * Response callback is IRadioResponse.setCellInfoListRateResponse()
1242 * @param isRoaming Indicating the device is roaming or not. The 'protocol' parameter in the old
1244 * condition. Note this is for backward compatibility with the old radio modem.
1247 * Response callback is IRadioResponse.setInitialAttachApnResponse()
1257 * Response callback is IRadioResponse.getImsRegistrationStateResponse()
1265 * In case of retry, data is encoded based on Voice Technology available.
1270 * Response callback is IRadioResponse.sendImsSmsResponse()
1284 * Response callback is IRadioResponse.iccTransmitApduBasicChannelResponse()
1296 * Response callback is IRadioResponse.iccOpenLogicalChannelResponse()
1307 * Response callback is IRadioResponse.iccCloseLogicalChannelResponse()
1320 * Response callback is IRadioResponse.iccTransmitApduLogicalChannelResponse()
1326 * This is used for device configuration by some CDMA operators.
1329 * @param itemId NvItem is radio NV item as defined in types.hal
1331 * Response callback is IRadioResponse.nvReadItemResponse()
1337 * This is used for device configuration by some CDMA operators.
1342 * Response callback is IRadioResponse.nvWriteItemResponse()
1348 * This is used for device configuration by some CDMA operators.
1353 * Response callback is IRadioResponse.nvWriteCdmaPrlResponse()
1359 * This is used for device configuration by some CDMA operators.
1364 * Response callback is IRadioResponse.nvResetConfigResponse()
1374 * Response callback is IRadioResponse.setUiccSubscriptionResponse()
1384 * Response callback is IRadioResponse.setDataAllowedResponse()
1393 * Response callback is IRadioResponse.getHardwareConfigResponse()
1406 * Response callback is IRadioResponse.requestIccSimAuthenticationResponse()
1417 * @param isRoaming Indicating the device is roaming or not. The 'protocol' parameter in the old
1419 * roaming condition. Note this is for backward compatibility with the old
1422 * Response callback is IRadioResponse.setDataProfileResponse()
1427 * Device is shutting down. All further commands are ignored
1432 * Response callback is IRadioResponse.requestShutdownResponse()
1441 * Response callback is IRadioResponse.getRadioCapabilityResponse()
1454 * Response callback is IRadioResponse.setRadioCapabilityResponse()
1465 * Response callback is IRadioResponse.startLceServiceResponse() which may return
1466 * RadioError:REQUEST_NOT_SUPPORTED if @1.2::IRadio or higher is supported.
1478 * Response callback is IRadioResponse.stopLceServiceResponse() which may return
1479 * RadioError:REQUEST_NOT_SUPPORTED if @1.2::IRadio or higher is supported.
1490 * Response callback is IRadioResponse.pullLceDataResponse() which may return
1491 * RadioError:REQUEST_NOT_SUPPORTED if @1.2::IRadio or higher is supported.
1499 * Request clear-on-read statistics information that is used for
1505 * Response callback is IRadioResponse.getModemActivityInfoResponse()
1514 * - Must allow all carriers. If a previously allowed SIM is present, modem must not reload
1515 * the SIM. If a previously disallowed SIM is present, reload the SIM and notify Android.
1518 * is in the allowed list, modem must not reload the SIM. If a present SIM is *not* in
1529 * Response callback is IRadioResponse.setAllowedCarriersResponse()
1538 * Response callback is IRadioResponse.getAllowedCarriersResponse()
1544 * This is providing the device state information for the modem to perform power saving
1551 * Response callback is IRadioResponse.sendDeviceStateResponse()
1557 * This is used to prevent unnecessary application processor wake up for power saving purposes
1564 * Response callback is IRadioResponse.setIndicationFilterResponse() which may return
1565 * RadioError:REQUEST_NOT_SUPPORTED if @1.2::IRadio or higher is supported.
1573 * Request is equivalent to inserting or removing the card.
1581 * Response callback is IRadioResponse.setSimCardPowerResponse() which may return
1582 * RadioError:REQUEST_NOT_SUPPORTED if @1.1::IRadio or higher is supported.
1589 * When response type received from a radio indication or radio response is