#
# Copyright (C) 2017 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

# Include all languages
$(call inherit-product, $(SRC_TARGET_DIR)/product/languages_full.mk)

# Enable updating of APEXes
$(call inherit-product, $(SRC_TARGET_DIR)/product/updatable_apex.mk)

# Enable userspace reboot
$(call inherit-product, $(SRC_TARGET_DIR)/product/userspace_reboot.mk)

# Enforce generic ramdisk allow list
$(call inherit-product, $(SRC_TARGET_DIR)/product/generic_ramdisk.mk)

# Set Vendor SPL to match platform
VENDOR_SECURITY_PATCH = $(PLATFORM_SECURITY_PATCH)

# Set boot SPL
BOOT_SECURITY_PATCH = $(PLATFORM_SECURITY_PATCH)

PRODUCT_VENDOR_PROPERTIES += \
    ro.vendor.boot_security_patch=$(BOOT_SECURITY_PATCH)

PRODUCT_SOONG_NAMESPACES += device/generic/goldfish # for audio, wifi and sensors

PRODUCT_USE_DYNAMIC_PARTITIONS := true
DISABLE_RILD_OEM_HOOK := true

# TODO(b/294888357) Remove this condition when OpenWRT is supported for RISC-V.
ifndef PRODUCT_ENFORCE_MAC80211_HWSIM
PRODUCT_ENFORCE_MAC80211_HWSIM := true
endif

PRODUCT_SET_DEBUGFS_RESTRICTIONS := true

PRODUCT_FS_COMPRESSION := 1
TARGET_RO_FILE_SYSTEM_TYPE ?= erofs
TARGET_USERDATAIMAGE_FILE_SYSTEM_TYPE ?= f2fs
TARGET_USERDATAIMAGE_PARTITION_SIZE ?= 8589934592

TARGET_VULKAN_SUPPORT ?= true

# Enable Virtual A/B
$(call inherit-product, $(SRC_TARGET_DIR)/product/virtual_ab_ota/vabc_features.mk)
PRODUCT_VIRTUAL_AB_COMPRESSION_METHOD := lz4
PRODUCT_VIRTUAL_AB_COW_VERSION := 3
PRODUCT_VIRTUAL_AB_COMPRESSION_FACTOR := 65536

PRODUCT_VENDOR_PROPERTIES += ro.virtual_ab.compression.threads=true
PRODUCT_VENDOR_PROPERTIES += ro.virtual_ab.batch_writes=true

# Enable Scoped Storage related
$(call inherit-product, $(SRC_TARGET_DIR)/product/emulated_storage.mk)

# Properties that are not vendor-specific. These will go in the product
# partition, instead of the vendor partition, and do not need vendor
# sepolicy
PRODUCT_PRODUCT_PROPERTIES += \
    remote_provisioning.hostname=staging-remoteprovisioning.sandbox.googleapis.com \
    persist.adb.tcp.port=5555 \
    ro.com.google.locationfeatures=1 \
    persist.sys.fuse.passthrough.enable=true \
    remote_provisioning.tee.rkp_only=1

# Until we support adb keys on user builds, and fix logcat over serial,
# spawn adbd by default without authorization for "adb logcat"
ifeq ($(TARGET_BUILD_VARIANT),user)
PRODUCT_PRODUCT_PROPERTIES += \
    ro.adb.secure=0 \
    ro.debuggable=1

PRODUCT_PACKAGES += \
    logpersist.start

PRODUCT_ARTIFACT_PATH_REQUIREMENT_ALLOWED_LIST += \
    $(TARGET_COPY_OUT_SYSTEM)/bin/logcatd \
    $(TARGET_COPY_OUT_SYSTEM)/bin/logpersist.cat \
    $(TARGET_COPY_OUT_SYSTEM)/bin/logpersist.start \
    $(TARGET_COPY_OUT_SYSTEM)/bin/logpersist.stop \
    $(TARGET_COPY_OUT_SYSTEM)/etc/init/logcatd.rc
endif

# Use AIDL for media.c2 HAL
PRODUCT_VENDOR_PROPERTIES += media.c2.hal.selection=aidl

# Explanation of specific properties:
#   ro.hardware.keystore_desede=true needed for CtsKeystoreTestCases
PRODUCT_VENDOR_PROPERTIES += \
    tombstoned.max_tombstone_count=100 \
    ro.carrier=unknown \
    ro.com.android.dataroaming?=false \
    ro.hardware.virtual_device=1 \
    ro.logd.size=1M \
    wifi.interface=wlan0 \
    wifi.direct.interface=p2p-dev-wlan0 \
    persist.sys.zram_enabled=1 \
    ro.hardware.keystore_desede=true \
    ro.incremental.enable=1 \
    debug.c2.use_dmabufheaps=1

# Below is a list of properties we probably should get rid of.
PRODUCT_VENDOR_PROPERTIES += \
    wlan.driver.status=ok

PRODUCT_VENDOR_PROPERTIES += \
    debug.stagefright.c2inputsurface=-1

# Enforce privapp permissions control.
PRODUCT_VENDOR_PROPERTIES += ro.control_privapp_permissions?=enforce

# Copy preopted files from system_b on first boot
PRODUCT_VENDOR_PROPERTIES += ro.cp_system_other_odex=1

AB_OTA_POSTINSTALL_CONFIG += \
    RUN_POSTINSTALL_system=true \
    POSTINSTALL_PATH_system=system/bin/otapreopt_script \
    FILESYSTEM_TYPE_system=erofs \
    POSTINSTALL_OPTIONAL_system=true

AB_OTA_POSTINSTALL_CONFIG += \
    RUN_POSTINSTALL_vendor=true \
    POSTINSTALL_PATH_vendor=bin/checkpoint_gc \
    FILESYSTEM_TYPE_vendor=erofs \
    POSTINSTALL_OPTIONAL_vendor=true

# Userdata Checkpointing OTA GC
PRODUCT_PACKAGES += \
    checkpoint_gc

# DRM service opt-in
PRODUCT_VENDOR_PROPERTIES += drm.service.enabled=true

# Call deleteAllKeys if vold detects a factory reset
PRODUCT_VENDOR_PROPERTIES += ro.crypto.metadata_init_delete_all_keys.enabled=true

#
# Packages for various GCE-specific utilities
#
PRODUCT_PACKAGES += \
    CuttlefishService \
    socket_vsock_proxy \
    tombstone_transmit \
    tombstone_producer \
    suspend_blocker \
    metrics_helper \
    snapshot_hook_post_resume \
    snapshot_hook_pre_suspend

$(call soong_config_append,cvd,launch_configs,cvd_config_auto.json cvd_config_auto_portrait.json cvd_config_auto_md.json cvd_config_foldable.json cvd_config_go.json cvd_config_phone.json cvd_config_slim.json cvd_config_tablet.json cvd_config_tv.json cvd_config_wear.json)
$(call soong_config_append,cvd,grub_config,grub.cfg)

#
# Packages for AOSP-available stuff we use from the framework
#
PRODUCT_PACKAGES += \
    e2fsck \
    ip \
    sleep \
    tcpdump \
    wificond \

#
# Package for AOSP QNS
#
PRODUCT_PACKAGES += \
    QualifiedNetworksService

#
# Package for AOSP GBA
#
PRODUCT_PACKAGES += \
    GbaService

#
# Packages for testing
#
PRODUCT_PACKAGES += \
    aidl_lazy_test_server \
    aidl_lazy_cb_test_server \

# Runtime Resource Overlays
PRODUCT_PACKAGES += \
    cuttlefish_overlay_connectivity \
    cuttlefish_overlay_frameworks_base_core \
    cuttlefish_overlay_nfc \
    cuttlefish_overlay_settings_provider \
    cuttlefish_overlay_uwb \

#
# Satellite vendor service for CF
#
PRODUCT_PACKAGES += CFSatelliteService

# PRODUCT_AAPT_CONFIG and PRODUCT_AAPT_PREF_CONFIG are intentionally not set to
# pick up every density resources.

#
# Common manifest for all targets
#
PRODUCT_SHIPPING_API_LEVEL := 35
LOCAL_DEVICE_FCM_MANIFEST_FILE ?= device/google/cuttlefish/shared/config/manifest.xml
DEVICE_MANIFEST_FILE += $(LOCAL_DEVICE_FCM_MANIFEST_FILE)

PRODUCT_CHECK_PREBUILT_MAX_PAGE_SIZE := true

#
# General files
#

PRODUCT_COPY_FILES += \
    device/google/cuttlefish/shared/config/init.product.rc:$(TARGET_COPY_OUT_PRODUCT)/etc/init/init.rc \
    device/google/cuttlefish/shared/config/init.vendor.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.cutf_cvm.rc \
    device/google/cuttlefish/shared/config/media_codecs_google_video.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_google_video.xml \
    device/google/cuttlefish/shared/config/media_codecs_performance.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_performance.xml \
    device/google/cuttlefish/shared/config/media_codecs.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs.xml \
    device/google/cuttlefish/shared/config/media_profiles.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_profiles_V1_0.xml \
    device/google/cuttlefish/shared/config/media_profiles.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_profiles_vendor.xml \
    device/google/cuttlefish/shared/config/seriallogging.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/seriallogging.rc \
    device/google/cuttlefish/shared/config/ueventd.rc:$(TARGET_COPY_OUT_VENDOR)/etc/ueventd.rc \
    device/google/cuttlefish/shared/permissions/cuttlefish_excluded_hardware.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/cuttlefish_excluded_hardware.xml \
    device/google/cuttlefish/shared/permissions/privapp-permissions-cuttlefish.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/privapp-permissions-cuttlefish.xml \
    frameworks/av/media/libeffects/data/audio_effects.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_effects.xml \
    frameworks/av/media/libstagefright/data/media_codecs_google_audio.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_google_audio.xml \
    frameworks/av/media/libstagefright/data/media_codecs_google_telephony.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_google_telephony.xml \
    frameworks/av/services/audiopolicy/config/audio_policy_volumes.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy_volumes.xml \
    frameworks/av/services/audiopolicy/config/default_volume_tables.xml:$(TARGET_COPY_OUT_VENDOR)/etc/default_volume_tables.xml \
    frameworks/av/services/audiopolicy/config/r_submix_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/r_submix_audio_policy_configuration.xml \
    frameworks/av/services/audiopolicy/config/surround_sound_configuration_5_0.xml:$(TARGET_COPY_OUT_VENDOR)/etc/surround_sound_configuration_5_0.xml \
    frameworks/av/services/audiopolicy/config/usb_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/usb_audio_policy_configuration.xml \
    frameworks/native/data/etc/android.hardware.ethernet.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.ethernet.xml \
    frameworks/native/data/etc/android.hardware.usb.accessory.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.usb.accessory.xml \
    frameworks/native/data/etc/android.hardware.usb.host.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.usb.host.xml \
    frameworks/native/data/etc/android.hardware.uwb.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.uwb.xml \
    frameworks/native/data/etc/android.hardware.wifi.direct.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.direct.xml \
    frameworks/native/data/etc/android.hardware.wifi.passpoint.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.passpoint.xml \
    frameworks/native/data/etc/android.hardware.wifi.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.xml \
    frameworks/native/data/etc/android.software.credentials.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.credentials.xml \
    frameworks/native/data/etc/android.software.ipsec_tunnels.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.ipsec_tunnels.xml \
    frameworks/native/data/etc/android.software.verified_boot.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.verified_boot.xml \

#
# Device input config
# Install .kcm/.kl/.idc files via input.config apex
#
PRODUCT_PACKAGES += com.google.cf.input.config

PRODUCT_PACKAGES += \
    fstab.cf.f2fs.hctr2 \
    fstab.cf.f2fs.hctr2.vendor_ramdisk \
    fstab.cf.f2fs.cts \
    fstab.cf.f2fs.cts.vendor_ramdisk \
    fstab.cf.ext4.hctr2 \
    fstab.cf.ext4.hctr2.vendor_ramdisk \
    fstab.cf.ext4.cts \
    fstab.cf.ext4.cts.vendor_ramdisk \

# Packages for HAL implementations

# TODO(b/218588089) remove this once cuttlefish can drop HIDL.
# This adds hwservicemanager and the allocator service to the device.
PRODUCT_PACKAGES += \
    hwservicemanager \
    android.hidl.allocator@1.0-service

#
# Weaver aidl HAL
#
# TODO(b/262418065) Add a real weaver implementation


#
# Authsecret AIDL HAL
#
PRODUCT_PACKAGES += \
    com.android.hardware.authsecret

ifndef LOCAL_AUDIO_PRODUCT_PACKAGE
#
# Still use HIDL Audio HAL on 'next'
#
LOCAL_AUDIO_PRODUCT_PACKAGE += \
    android.hardware.audio.parameter_parser.example_service \
    com.android.hardware.audio
PRODUCT_SYSTEM_EXT_PROPERTIES += \
    ro.audio.ihaladaptervendorextension_enabled=true
endif

ifndef LOCAL_AUDIO_PRODUCT_COPY_FILES
LOCAL_AUDIO_PRODUCT_COPY_FILES := \
    device/generic/goldfish/audio/policy/audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy_configuration.xml \
    device/generic/goldfish/audio/policy/primary_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/primary_audio_policy_configuration.xml \
    frameworks/av/services/audiopolicy/config/r_submix_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/r_submix_audio_policy_configuration.xml \
    frameworks/av/services/audiopolicy/config/audio_policy_volumes.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy_volumes.xml \
    frameworks/av/services/audiopolicy/config/default_volume_tables.xml:$(TARGET_COPY_OUT_VENDOR)/etc/default_volume_tables.xml
LOCAL_AUDIO_PRODUCT_COPY_FILES += \
    hardware/interfaces/audio/aidl/default/audio_effects_config.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_effects_config.xml
endif

PRODUCT_PACKAGES += $(LOCAL_AUDIO_PRODUCT_PACKAGE)
PRODUCT_COPY_FILES += $(LOCAL_AUDIO_PRODUCT_COPY_FILES)
DEVICE_PACKAGE_OVERLAYS += $(LOCAL_AUDIO_DEVICE_PACKAGE_OVERLAYS)

#
# Contexthub HAL
#
LOCAL_CONTEXTHUB_PRODUCT_PACKAGE ?= \
    com.android.hardware.contexthub
PRODUCT_PACKAGES += $(LOCAL_CONTEXTHUB_PRODUCT_PACKAGE)

#
# Drm HAL
#
ifeq ($(TARGET_USE_LAZY_CLEARKEY),true)
PRODUCT_PACKAGES += \
    com.android.hardware.drm.clearkey.lazy
else
PRODUCT_PACKAGES += \
    android.hardware.drm@latest-service.clearkey
endif

LOCAL_ENABLE_WIDEVINE ?= true
ifeq ($(LOCAL_ENABLE_WIDEVINE),true)
-include vendor/widevine/libwvdrmengine/apex/device/device.mk
endif

#
# Confirmation UI HAL
#
ifeq ($(LOCAL_CONFIRMATIONUI_PRODUCT_PACKAGE),)
    LOCAL_CONFIRMATIONUI_PRODUCT_PACKAGE := com.google.cf.confirmationui
endif
PRODUCT_PACKAGES += $(LOCAL_CONFIRMATIONUI_PRODUCT_PACKAGE)

#
# Dumpstate HAL
#
ifeq ($(LOCAL_DUMPSTATE_PRODUCT_PACKAGE),)
    LOCAL_DUMPSTATE_PRODUCT_PACKAGE += com.android.hardware.dumpstate
endif
PRODUCT_PACKAGES += $(LOCAL_DUMPSTATE_PRODUCT_PACKAGE)

#
# Gatekeeper
#
PRODUCT_PACKAGES += \
  com.android.hardware.gatekeeper.cf_remote \
  com.android.hardware.gatekeeper.nonsecure \

#
# Oemlock
#
LOCAL_ENABLE_OEMLOCK ?= true
ifeq ($(LOCAL_ENABLE_OEMLOCK),true)
ifeq ($(LOCAL_OEMLOCK_PRODUCT_PACKAGE),)
    LOCAL_OEMLOCK_PRODUCT_PACKAGE := com.google.cf.oemlock
endif
PRODUCT_PACKAGES += \
    $(LOCAL_OEMLOCK_PRODUCT_PACKAGE)

PRODUCT_VENDOR_PROPERTIES += ro.oem_unlock_supported=1
endif

# Health
ifeq ($(LOCAL_HEALTH_PRODUCT_PACKAGE),)
    LOCAL_HEALTH_PRODUCT_PACKAGE := \
    com.google.cf.health \
    android.hardware.health-service.cuttlefish_recovery \

endif
PRODUCT_PACKAGES += $(LOCAL_HEALTH_PRODUCT_PACKAGE)

# Health Storage
PRODUCT_PACKAGES += \
    com.google.cf.health.storage

PRODUCT_PACKAGES += \
    com.android.hardware.input.processor

# Netlink Interceptor HAL
PRODUCT_PACKAGES += \
    com.android.hardware.net.nlinterceptor

#
# Lights
#
LOCAL_ENABLE_LIGHT ?= true
ifeq ($(LOCAL_ENABLE_LIGHT),true)
PRODUCT_PACKAGES += \
    com.google.cf.light \

endif

#
# KeyMint HAL
#
PRODUCT_PACKAGES += \
	com.android.hardware.keymint.rust_cf_remote \
	com.android.hardware.keymint.rust_nonsecure \

# Indicate that KeyMint includes support for the ATTEST_KEY key purpose.
PRODUCT_COPY_FILES += \
    frameworks/native/data/etc/android.hardware.keystore.app_attest_key.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.keystore.app_attest_key.xml
# Indicate that KeyMint includes (emulated) support for device ID attestation.
PRODUCT_COPY_FILES += \
    frameworks/native/data/etc/android.software.device_id_attestation.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.device_id_attestation.xml

#
# Non-secure implementation of AuthGraph HAL for compliance.
#
PRODUCT_PACKAGES += \
    com.android.hardware.security.authgraph

#
# Non-secure implementation of Secretkeeper HAL for compliance.
#
PRODUCT_PACKAGES += \
    com.android.hardware.security.secretkeeper

#
# Power and PowerStats HALs
#
PRODUCT_PACKAGES += com.android.hardware.power

#
# Tetheroffload HAL
#
PRODUCT_PACKAGES += \
    com.android.hardware.tetheroffload

#
# Thermal HAL
#
LOCAL_THERMAL_HAL_PRODUCT_PACKAGE ?= com.android.hardware.thermal
PRODUCT_PACKAGES += $(LOCAL_THERMAL_HAL_PRODUCT_PACKAGE)

#
# NeuralNetworks HAL
#
PRODUCT_PACKAGES += \
    com.android.hardware.neuralnetworks

# USB
PRODUCT_PACKAGES += \
    com.android.hardware.usb

# BootControl HAL
PRODUCT_PACKAGES += \
    com.android.hardware.boot \
    android.hardware.boot-service.default_recovery


# Memtrack HAL
PRODUCT_PACKAGES += \
    com.android.hardware.memtrack

# Fastboot HAL & fastbootd
PRODUCT_PACKAGES += \
    android.hardware.fastboot@1.1-impl-mock \
    fastbootd

# Recovery mode
ifneq ($(TARGET_NO_RECOVERY),true)

PRODUCT_COPY_FILES += \
    device/google/cuttlefish/shared/config/init.recovery.rc:$(TARGET_COPY_OUT_RECOVERY)/root/init.recovery.cutf_cvm.rc \
    device/google/cuttlefish/shared/config/cgroups.json:$(TARGET_COPY_OUT_RECOVERY)/root/vendor/etc/cgroups.json \
    device/google/cuttlefish/shared/config/ueventd.rc:$(TARGET_COPY_OUT_RECOVERY)/root/ueventd.cutf_cvm.rc \

PRODUCT_PACKAGES += \
    update_engine_sideload

endif

ifdef TARGET_DEDICATED_RECOVERY
PRODUCT_BUILD_RECOVERY_IMAGE := true
PRODUCT_PACKAGES += linker.vendor_ramdisk shell_and_utilities_vendor_ramdisk
else
PRODUCT_PACKAGES += linker.recovery shell_and_utilities_recovery
endif

# wifi
# Add com.android.hardware.wifi for android.hardware.wifi-service
PRODUCT_PACKAGES += com.android.hardware.wifi
# Add com.google.cf.wifi and com.google.cf.wpa_supplicant for hostapd and wpa_supplicant
PRODUCT_PACKAGES += com.google.cf.wifi
PRODUCT_PACKAGES += com.google.cf.wpa_supplicant
$(call add_soong_config_namespace, wpa_supplicant)
$(call add_soong_config_var_value, wpa_supplicant, platform_version, $(PLATFORM_VERSION))
$(call add_soong_config_var_value, wpa_supplicant, nl80211_driver, CONFIG_DRIVER_NL80211_QCA)

# VirtWifi interface configuration
ifeq ($(DEVICE_VIRTWIFI_PORT),)
    DEVICE_VIRTWIFI_PORT := eth2
endif
PRODUCT_VENDOR_PROPERTIES += ro.vendor.virtwifi.port=${DEVICE_VIRTWIFI_PORT}

# Wifi Runtime Resource Overlay
PRODUCT_PACKAGES += \
    CuttlefishTetheringOverlay \
    CuttlefishWifiOverlay

ifeq ($(PRODUCT_ENFORCE_MAC80211_HWSIM),true)
PRODUCT_VENDOR_PROPERTIES += ro.vendor.wifi_impl=mac80211_hwsim_virtio
$(call soong_config_append,cvdhost,enforce_mac80211_hwsim,true)
else
PRODUCT_VENDOR_PROPERTIES += ro.vendor.wifi_impl=virt_wifi
endif

# UWB HAL
PRODUCT_PACKAGES += com.android.hardware.uwb
PRODUCT_VENDOR_PROPERTIES += ro.vendor.uwb.dev=/dev/hvc9

# Host packages to install
PRODUCT_HOST_PACKAGES += socket_vsock_proxy

#for Confirmation UI
PRODUCT_SOONG_NAMESPACES += vendor/google_devices/common/proprietary/confirmatioui_hal

# Need this so that the application's loop on reading input can be synchronized
# with HW VSYNC
PRODUCT_VENDOR_PROPERTIES += \
    ro.surface_flinger.running_without_sync_framework=true

# Enable GPU-intensive background blur support on Cuttlefish when requested by apps
PRODUCT_VENDOR_PROPERTIES += \
    ro.surface_flinger.supports_background_blur=1

# Set Game Default Frame Rate
# See b/286084594
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \
    ro.surface_flinger.game_default_frame_rate_override=60

# Disable GPU-intensive background blur for widget picker
PRODUCT_SYSTEM_PROPERTIES += \
    ro.launcher.depth.widget=0

# Start fingerprint virtual HAL process
PRODUCT_VENDOR_PROPERTIES += ro.vendor.fingerprint_virtual_hal_start=true

# Vendor Dlkm Locader
PRODUCT_PACKAGES += \
   dlkm_loader

# CAS AIDL HAL
PRODUCT_PACKAGES += \
    com.android.hardware.cas

PRODUCT_COPY_FILES += \
    device/google/cuttlefish/shared/config/pci.ids:$(TARGET_COPY_OUT_VENDOR)/pci.ids

# Thread Network AIDL HAL and Demo App
PRODUCT_PACKAGES += \
    com.android.hardware.threadnetwork \
    ThreadNetworkDemoApp

PRODUCT_CHECK_VENDOR_SEAPP_VIOLATIONS := true

PRODUCT_CHECK_DEV_TYPE_VIOLATIONS := true

TARGET_BOARD_FASTBOOT_INFO_FILE = device/google/cuttlefish/shared/fastboot-info.txt