android-15.0.0_r3/s

/******************************************************************************
 *
 *  Copyright 2019 The Android Open Source Project
 *
 *  Licensed under the Apache License, Version 2.0 (the "License");
 *  you may not use this file except in compliance with the License.
 *  You may obtain a copy of the License at:
 *
 *  http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software
 *  distributed under the License is distributed on an "AS IS" BASIS,
 *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *  See the License for the specific language governing permissions and
 *  limitations under the License.
 *
 ******************************************************************************/

#include "security/pairing_handler_le.h"

#include <bluetooth/log.h>

#include "hci/octets.h"
#include "os/rand.h"

namespace bluetooth {
namespace security {

using hci::Octet16;

MyOobData PairingHandlerLe::GenerateOobData() {
  MyOobData data{};
  std::tie(data.private_key, data.public_key) = GenerateECDHKeyPair();

  data.r = bluetooth::os::GenerateRandom<16>();
  data.c = crypto_toolbox::f4(data.public_key.x.data(), data.public_key.x.data(), data.r, 0);
  return data;
}

void PairingHandlerLe::PairingMain(InitialInformations i) {
  log::info("Pairing Started");

  if (i.remotely_initiated) {
    log::info("Was remotely initiated, presenting user with the accept prompt");
    i.user_interface_handler->Post(common::BindOnce(&UI::DisplayPairingPrompt, common::Unretained(i.user_interface),
                                                    i.remote_connection_address, i.remote_name));

    // If pairing was initiated by remote device, wait for the user to accept
    // the request from the UI.
    log::info("Waiting for the prompt response");
    std::optional<PairingEvent> pairingAccepted = WaitUiPairingAccept();
    if (!pairingAccepted || pairingAccepted->ui_value == 0) {
      log::info("User either did not accept the remote pairing, or the prompt timed out");
      // TODO: Uncomment this one once we find a way to attempt to send packet when the link is down
      // SendL2capPacket(i, PairingFailedBuilder::Create(PairingFailedReason::UNSPECIFIED_REASON));
      i.OnPairingFinished(PairingFailure("User either did not accept the remote pairing, or the prompt timed out"));
      return;
    }

    log::info("Pairing prompt accepted");
  }

  /************************************************ PHASE 1 *********************************************************/
  Phase1ResultOrFailure phase_1_result = ExchangePairingFeature(i);
  if (std::holds_alternative<PairingFailure>(phase_1_result)) {
    log::warn("Pairing failed in phase 1");
    // We already send pairing fialed in lower layer. Which one should do that ? how about disconneciton?
    // SendL2capPacket(i, PairingFailedBuilder::Create(PairingFailedReason::UNSPECIFIED_REASON));
    // TODO: disconnect?
    i.OnPairingFinished(std::get<PairingFailure>(phase_1_result));
    return;
  }

  auto [pairing_request, pairing_response] = std::get<Phase1Result>(phase_1_result);

  uint8_t key_size =
      std::min(pairing_request.GetMaximumEncryptionKeySize(), pairing_response.GetMaximumEncryptionKeySize());
  if (key_size < 7 || key_size > 16) {
    log::warn("Resulting key size is bad {}", key_size);
    SendL2capPacket(i, PairingFailedBuilder::Create(PairingFailedReason::ENCRYPTION_KEY_SIZE));
    i.OnPairingFinished(PairingFailure("Resulting key size is bad", PairingFailedReason::ENCRYPTION_KEY_SIZE));
    return;
  }
  if (key_size != 16) {
    log::warn("Resulting key size is less than 16 octets!");
  }

  /************************************************ PHASE 2 *********************************************************/
  bool isSecureConnections = pairing_request.GetAuthReq() & pairing_response.GetAuthReq() & AuthReqMaskSc;
  if (isSecureConnections) {
    // 2.3.5.6 LE Secure Connections pairing phase 2
    log::info("Pairing Phase 2 LE Secure connections Started");

    /*
    TODO: what to do with this piece of spec ?
    If Secure Connections pairing has been initiated over BR/EDR, the
    following fields of the SM Pairing Request PDU are reserved for future use:
     • the IO Capability field,
     • the OOB data flag field, and
     • all bits in the Auth Req field except the CT2 bit.
    */

    OobDataFlag remote_have_oob_data =
        IAmCentral(i) ? pairing_response.GetOobDataFlag() : pairing_request.GetOobDataFlag();

    auto key_exchange_result = ExchangePublicKeys(i, remote_have_oob_data);
    if (std::holds_alternative<PairingFailure>(key_exchange_result)) {
      log::error("Public key exchange failed");
      i.OnPairingFinished(std::get<PairingFailure>(key_exchange_result));
      return;
    }
    auto [PKa, PKb, dhkey] = std::get<KeyExchangeResult>(key_exchange_result);

    // Public key exchange finished, Diffie-Hellman key computed.

    Stage1ResultOrFailure stage1result = DoSecureConnectionsStage1(i, PKa, PKb, pairing_request, pairing_response);
    if (std::holds_alternative<PairingFailure>(stage1result)) {
      i.OnPairingFinished(std::get<PairingFailure>(stage1result));
      return;
    }

    Stage2ResultOrFailure stage_2_result = DoSecureConnectionsStage2(i, PKa, PKb, pairing_request, pairing_response,
                                                                     std::get<Stage1Result>(stage1result), dhkey);
    if (std::holds_alternative<PairingFailure>(stage_2_result)) {
      i.OnPairingFinished(std::get<PairingFailure>(stage_2_result));
      return;
    }

    Octet16 ltk = std::get<Octet16>(stage_2_result);
    // Mask the key
    std::fill(ltk.begin() + key_size, ltk.end(), 0x00);

    if (IAmCentral(i)) {
      log::info("Sending start encryption request");
      SendHciLeStartEncryption(i, i.connection_handle, {0}, {0}, ltk);
    } else {
      auto ltk_req = WaitLeLongTermKeyRequest();
      SendHciLeLongTermKeyReply(i, i.connection_handle, ltk);
    }
  } else {
    // 2.3.5.5 LE legacy pairing phase 2
    log::info("Pairing Phase 2 LE legacy pairing Started");

    LegacyStage1ResultOrFailure stage1result = DoLegacyStage1(i, pairing_request, pairing_response);
    if (std::holds_alternative<PairingFailure>(stage1result)) {
      log::error("Phase 1 failed");
      i.OnPairingFinished(std::get<PairingFailure>(stage1result));
      return;
    }

    Octet16 tk = std::get<Octet16>(stage1result);
    StkOrFailure stage2result = DoLegacyStage2(i, pairing_request, pairing_response, tk);
    if (std::holds_alternative<PairingFailure>(stage2result)) {
      log::error("stage 2 failed");
      i.OnPairingFinished(std::get<PairingFailure>(stage2result));
      return;
    }

    Octet16 stk = std::get<Octet16>(stage2result);
    // Mask the key
    std::fill(stk.begin() + key_size, stk.end(), 0x00);
    if (IAmCentral(i)) {
      log::info("Sending start encryption request");
      SendHciLeStartEncryption(i, i.connection_handle, {0}, {0}, stk);
    } else {
      auto ltk_req = WaitLeLongTermKeyRequest();
      SendHciLeLongTermKeyReply(i, i.connection_handle, stk);
    }
  }

  /************************************************ PHASE 3 *********************************************************/
  log::info("Waiting for encryption changed");
  auto encryption_change_result = WaitEncryptionChanged();
  if (std::holds_alternative<PairingFailure>(encryption_change_result)) {
    i.OnPairingFinished(std::get<PairingFailure>(encryption_change_result));
    return;
  } else if (std::holds_alternative<EncryptionChangeView>(encryption_change_result)) {
    EncryptionChangeView encryption_changed = std::get<EncryptionChangeView>(encryption_change_result);
    if (encryption_changed.GetStatus() != hci::ErrorCode::SUCCESS ||
        encryption_changed.GetEncryptionEnabled() != hci::EncryptionEnabled::ON) {
      i.OnPairingFinished(PairingFailure("Encryption change failed"));
      return;
    }
  } else if (std::holds_alternative<EncryptionKeyRefreshCompleteView>(encryption_change_result)) {
    EncryptionKeyRefreshCompleteView encryption_changed =
        std::get<EncryptionKeyRefreshCompleteView>(encryption_change_result);
    if (encryption_changed.GetStatus() != hci::ErrorCode::SUCCESS) {
      i.OnPairingFinished(PairingFailure("Encryption key refresh failed"));
      return;
    }
  } else {
    i.OnPairingFinished(PairingFailure("Unknown case of encryption change result"));
    return;
  }
  log::info("Encryption change finished successfully");

  DistributedKeysOrFailure keyExchangeStatus = DistributeKeys(i, pairing_response, isSecureConnections);
  if (std::holds_alternative<PairingFailure>(keyExchangeStatus)) {
    i.OnPairingFinished(std::get<PairingFailure>(keyExchangeStatus));
    log::error("Key exchange failed");
    return;
  }

  // If it's secure connections pairing, do cross-transport key derivation
  DistributedKeys distributed_keys = std::get<DistributedKeys>(keyExchangeStatus);
  if ((pairing_response.GetAuthReq() & AuthReqMaskSc) && distributed_keys.remote_ltk.has_value()) {
    bool use_h7 = (pairing_response.GetAuthReq() & AuthReqMaskCt2);
    Octet16 link_key = crypto_toolbox::ltk_to_link_key(*(distributed_keys.remote_ltk), use_h7);
    distributed_keys.remote_link_key = link_key;
  }

  // bool bonding = pairing_request.GetAuthReq() & pairing_response.GetAuthReq() & AuthReqMaskBondingFlag;

  i.OnPairingFinished(PairingResult{
      .connection_address = i.remote_connection_address,
      .distributed_keys = distributed_keys,
      .key_size = key_size,
  });

  log::info("Pairing finished successfully.");
}

Phase1ResultOrFailure PairingHandlerLe::ExchangePairingFeature(const InitialInformations& i) {
  log::info("Phase 1 start");

  if (IAmCentral(i)) {
    // Send Pairing Request
    const auto& x = i.myPairingCapabilities;
    auto pairing_request_builder =
        PairingRequestBuilder::Create(x.io_capability, x.oob_data_flag, x.auth_req, x.maximum_encryption_key_size,
                                      x.initiator_key_distribution, x.responder_key_distribution);
    // basically pairing_request = myPairingCapabilities;

    // Convert builder to view
    std::shared_ptr<std::vector<uint8_t>> packet_bytes = std::make_shared<std::vector<uint8_t>>();
    BitInserter it(*packet_bytes);
    pairing_request_builder->Serialize(it);
    PacketView<kLittleEndian> packet_bytes_view(packet_bytes);
    auto temp_cmd_view = CommandView::Create(packet_bytes_view);
    auto pairing_request = PairingRequestView::Create(temp_cmd_view);
    log::assert_that(pairing_request.IsValid(), "assert failed: pairing_request.IsValid()");

    log::info("Sending Pairing Request");
    SendL2capPacket(i, std::move(pairing_request_builder));

    log::info("Waiting for Pairing Response");
    auto response = WaitPairingResponse();

    /* There is a potential collision where the peripheral initiates the pairing at the same time we initiate it, by
     * sending security request. */
    if (std::holds_alternative<PairingFailure>(response) &&
        std::get<PairingFailure>(response).received_code_ == Code::SECURITY_REQUEST) {
      log::info("Received security request, waiting for Pairing Response again...");
      response = WaitPairingResponse();
    }

    if (std::holds_alternative<PairingFailure>(response)) {
      // TODO: should the failure reason be different in some cases ? How about
      // when we lost connection ? Don't send anything at all, or have L2CAP
      // layer ignore it?
      SendL2capPacket(i, PairingFailedBuilder::Create(PairingFailedReason::UNSPECIFIED_REASON));
      return std::get<PairingFailure>(response);
    }

    auto pairing_response = std::get<PairingResponseView>(response);

    log::info("Phase 1 finish");
    return Phase1Result{pairing_request, pairing_response};
  } else {
    std::optional<PairingRequestView> pairing_request;

    if (i.remotely_initiated) {
      if (!i.pairing_request.has_value()) {
        return PairingFailure("You must pass PairingRequest as a initial information to peripheral!");
      }

      pairing_request = i.pairing_request.value();

      if (!pairing_request->IsValid()) return PairingFailure("Malformed PairingRequest");
    } else {
      SendL2capPacket(i, SecurityRequestBuilder::Create(i.myPairingCapabilities.auth_req));

      log::info("Waiting for Pairing Request");
      auto request = WaitPairingRequest();
      if (std::holds_alternative<PairingFailure>(request)) {
        log::info("{}", std::get<PairingFailure>(request).message);
        SendL2capPacket(i, PairingFailedBuilder::Create(PairingFailedReason::UNSPECIFIED_REASON));
        return std::get<PairingFailure>(request);
      }

      pairing_request = std::get<PairingRequestView>(request);
    }

    uint8_t key_size = pairing_request->GetMaximumEncryptionKeySize();
    if (key_size < 7 || key_size > 16) {
      log::warn("Resulting key size is bad {}", key_size);
      SendL2capPacket(i, PairingFailedBuilder::Create(PairingFailedReason::ENCRYPTION_KEY_SIZE));
      return PairingFailure("Resulting key size is bad", PairingFailedReason::ENCRYPTION_KEY_SIZE);
    }

    // Send Pairing Request
    const auto& x = i.myPairingCapabilities;
    // basically pairing_response_builder = my_first_packet;
    // We are not allowed to enable bits that the remote did not allow us to set in initiator_key_dist and
    // responder_key_distribution
    auto pairing_response_builder =
        PairingResponseBuilder::Create(x.io_capability, x.oob_data_flag, x.auth_req, x.maximum_encryption_key_size,
                                       x.initiator_key_distribution & pairing_request->GetInitiatorKeyDistribution(),
                                       x.responder_key_distribution & pairing_request->GetResponderKeyDistribution());

    // Convert builder to view
    std::shared_ptr<std::vector<uint8_t>> packet_bytes = std::make_shared<std::vector<uint8_t>>();
    BitInserter it(*packet_bytes);
    pairing_response_builder->Serialize(it);
    PacketView<kLittleEndian> packet_bytes_view(packet_bytes);
    auto temp_cmd_view = CommandView::Create(packet_bytes_view);
    auto pairing_response = PairingResponseView::Create(temp_cmd_view);
    log::assert_that(pairing_response.IsValid(), "assert failed: pairing_response.IsValid()");

    log::info("Sending Pairing Response");
    SendL2capPacket(i, std::move(pairing_response_builder));

    log::info("Phase 1 finish");
    return Phase1Result{pairing_request.value(), pairing_response};
  }
}

DistributedKeysOrFailure PairingHandlerLe::DistributeKeys(const InitialInformations& i,
                                                          const PairingResponseView& pairing_response,
                                                          bool isSecureConnections) {
  uint8_t keys_i_receive =
      IAmCentral(i) ? pairing_response.GetResponderKeyDistribution() : pairing_response.GetInitiatorKeyDistribution();
  uint8_t keys_i_send =
      IAmCentral(i) ? pairing_response.GetInitiatorKeyDistribution() : pairing_response.GetResponderKeyDistribution();

  // In Secure Connections on the LE Transport, the EncKey field shall be ignored
  if (isSecureConnections) {
    keys_i_send = (~KeyMaskEnc) & keys_i_send;
    keys_i_receive = (~KeyMaskEnc) & keys_i_receive;
  }

  log::info(
      "Key distribution start, keys_i_send=0x{:02x}, keys_i_receive=0x{:02x}",
      keys_i_send,
      keys_i_receive);

  // TODO: obtain actual values, and apply key_size to the LTK
  Octet16 my_ltk = bluetooth::os::GenerateRandom<16>();
  uint16_t my_ediv = bluetooth::os::GenerateRandom();
  std::array<uint8_t, 8> my_rand = bluetooth::os::GenerateRandom<8>();

  Octet16 my_irk = i.my_identity_resolving_key;
  Address my_identity_address = i.my_identity_address.GetAddress();
  AddrType my_identity_address_type =
      static_cast<bluetooth::security::AddrType>(i.my_identity_address.GetAddressType());
  Octet16 my_signature_key{0};

  if (IAmCentral(i)) {
    // EncKey is unused for LE Secure Connections
    DistributedKeysOrFailure keys = ReceiveKeys(keys_i_receive);
    if (std::holds_alternative<PairingFailure>(keys)) {
      return keys;
    }

    SendKeys(i, keys_i_send, my_ltk, my_ediv, my_rand, my_irk, my_identity_address, my_identity_address_type,
             my_signature_key);

    std::get<DistributedKeys>(keys).local_ltk = my_ltk;
    std::get<DistributedKeys>(keys).local_ediv = my_ediv;
    std::get<DistributedKeys>(keys).local_rand = my_rand;
    log::info("Key distribution finish");
    return keys;
  } else {
    SendKeys(i, keys_i_send, my_ltk, my_ediv, my_rand, my_irk, my_identity_address, my_identity_address_type,
             my_signature_key);

    DistributedKeysOrFailure keys = ReceiveKeys(keys_i_receive);
    if (std::holds_alternative<PairingFailure>(keys)) {
      return keys;
    }

    std::get<DistributedKeys>(keys).local_ltk = my_ltk;
    std::get<DistributedKeys>(keys).local_ediv = my_ediv;
    std::get<DistributedKeys>(keys).local_rand = my_rand;
    log::info("Key distribution finish");
    return keys;
  }
}

DistributedKeysOrFailure PairingHandlerLe::ReceiveKeys(const uint8_t& keys_i_receive) {
  std::optional<Octet16> ltk;                 /* Legacy only */
  std::optional<uint16_t> ediv;               /* Legacy only */
  std::optional<std::array<uint8_t, 8>> rand; /* Legacy only */
  std::optional<hci::AddressWithType> identity_address;
  std::optional<Octet16> irk;
  std::optional<Octet16> signature_key;

  if (keys_i_receive & KeyMaskEnc) {
    {
      auto packet = WaitEncryptionInformation();
      if (std::holds_alternative<PairingFailure>(packet)) {
        log::error("Was expecting Encryption Information but did not receive!");
        return std::get<PairingFailure>(packet);
      }
      ltk = std::get<EncryptionInformationView>(packet).GetLongTermKey();
    }

    {
      auto packet = WaitCentralIdentification();
      if (std::holds_alternative<PairingFailure>(packet)) {
        log::error("Was expecting Central Identification but did not receive!");
        return std::get<PairingFailure>(packet);
      }
      ediv = std::get<CentralIdentificationView>(packet).GetEdiv();
      rand = std::get<CentralIdentificationView>(packet).GetRand();
    }
  }

  if (keys_i_receive & KeyMaskId) {
    auto packet = WaitIdentityInformation();
    if (std::holds_alternative<PairingFailure>(packet)) {
      log::error("Was expecting Identity Information but did not receive!");
      return std::get<PairingFailure>(packet);
    }

    log::info("Received Identity Information");
    irk = std::get<IdentityInformationView>(packet).GetIdentityResolvingKey();

    auto iapacket = WaitIdentityAddressInformation();
    if (std::holds_alternative<PairingFailure>(iapacket)) {
      log::error("Was expecting Identity Address Information but did not receive!");
      return std::get<PairingFailure>(iapacket);
    }
    log::info("Received Identity Address Information");
    auto iapacketview = std::get<IdentityAddressInformationView>(iapacket);
    identity_address = hci::AddressWithType(iapacketview.GetBdAddr(), iapacketview.GetAddrType() == AddrType::PUBLIC
                                                                          ? hci::AddressType::PUBLIC_DEVICE_ADDRESS
                                                                          : hci::AddressType::RANDOM_DEVICE_ADDRESS);
  }

  if (keys_i_receive & KeyMaskSign) {
    auto packet = WaitSigningInformation();
    if (std::holds_alternative<PairingFailure>(packet)) {
      log::error("Was expecting Signing Information but did not receive!");
      return std::get<PairingFailure>(packet);
    }

    log::info("Received Signing Information");
    signature_key = std::get<SigningInformationView>(packet).GetSignatureKey();
  }

  return DistributedKeys{.remote_ltk = ltk,
                         .remote_ediv = ediv,
                         .remote_rand = rand,
                         .remote_identity_address = identity_address,
                         .remote_irk = irk,
                         .remote_signature_key = signature_key};
}

void PairingHandlerLe::SendKeys(const InitialInformations& i, const uint8_t& keys_i_send, Octet16 ltk, uint16_t ediv,
                                std::array<uint8_t, 8> rand, Octet16 irk, Address identity_address,
                                AddrType identity_addres_type, Octet16 signature_key) {
  if (keys_i_send & KeyMaskEnc) {
    log::info("Sending Encryption Information");
    SendL2capPacket(i, EncryptionInformationBuilder::Create(ltk));
    log::info("Sending Central Identification");
    SendL2capPacket(i, CentralIdentificationBuilder::Create(ediv, rand));
  }

  if (keys_i_send & KeyMaskId) {
    log::info("Sending Identity Information");
    SendL2capPacket(i, IdentityInformationBuilder::Create(irk));
    log::info("Sending Identity Address Information");
    SendL2capPacket(i, IdentityAddressInformationBuilder::Create(identity_addres_type, identity_address));
  }

  if (keys_i_send & KeyMaskSign) {
    log::info("Sending Signing Information");
    SendL2capPacket(i, SigningInformationBuilder::Create(signature_key));
  }
}

}  // namespace security
}  // namespace bluetooth