1<?xml version="1.0" encoding="utf-8"?>
2<!-- Copyright (C) 2009 The Android Open Source Project
3
4     Licensed under the Apache License, Version 2.0 (the "License");
5     you may not use this file except in compliance with the License.
6     You may obtain a copy of the License at
7
8          http://www.apache.org/licenses/LICENSE-2.0
9
10     Unless required by applicable law or agreed to in writing, software
11     distributed under the License is distributed on an "AS IS" BASIS,
12     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13     See the License for the specific language governing permissions and
14     limitations under the License.
15-->
16
17<!-- Phone app resources that may need to be customized
18     for different hardware or product builds. -->
19<resources>
20    <!-- Flag indicating whether the Phone app should ignore
21         EVENT_SIM_NETWORK_LOCKED events from the Sim.  If true, this will
22         prevent the IccNetworkDepersonalizationPanel from being shown,
23         and effectively disable the "Sim network lock" feature. -->
24    <bool name="ignore_sim_network_locked_events">false</bool>
25
26    <!-- Flag indicating whether the Phone app should provide
27         a "Dismiss" button on the SIM network unlock screen.
28         The default value is true.
29         If set to false, there will be *no way* to dismiss the SIM
30         network unlock screen if you don't enter the correct unlock code.
31         (One important consequence: there will be no way to make an
32         Emergency Call if your SIM is network-locked and you don't know
33         the PIN.) -->
34    <bool name="sim_network_unlock_allow_dismiss">true</bool>
35
36    <!-- OTA configuration values, used when provisioning CDMA devices.
37         Following defaults values of zero means OTA UI is completely disabled.
38         These OTA UI can be enabled by setting config value to one in the product
39         specific overlay file -->
40
41    <!-- Determine whether we want to display the OTA activation screen, which
42         gives the user option to activate or cancel -->
43    <integer name="OtaShowActivationScreen">1</integer>
44    <!-- Determine whether we should show the "listen for instructions" screen after
45         successfully placing the OTA call -->
46    <integer name="OtaShowListeningScreen">0</integer>
47    <!-- The number of times we should show the activation screen/allow the provisioning
48         to fail before just showing an unsuccessful dialog -->
49    <integer name="OtaShowActivateFailTimes">0</integer>
50    <!-- Determine whether or not we should play the success/failure tone -->
51    <integer name="OtaPlaySuccessFailureTone">0</integer>
52
53    <!-- Flag indicating if the phone is a world phone -->
54    <bool name="world_phone">false</bool>
55
56    <!-- If true, enable vibration (haptic feedback) for key presses
57         in the EmergencyDialer activity. The pattern is set on a
58         per-platform basis using config_virtualKeyVibePattern.  To be
59         consistent with the regular Dialer, this value should agree
60         with the corresponding values from config.xml under
61         apps/Contacts. -->
62    <bool name="config_enable_dialer_key_vibration">true</bool>
63
64    <!-- Flag indicating if hac is enabled -->
65    <bool name="hac_enabled">false</bool>
66
67    <!-- Flag indicating if dtmf tone type is enabled -->
68    <bool name="dtmf_type_enabled">false</bool>
69
70    <!-- Flag indicating if auto retry is enabled -->
71    <bool name="auto_retry_enabled">false</bool>
72
73    <!-- Determine whether we want to play local DTMF tones in a call, or
74         just let the radio/BP handle playing of the tones. -->
75    <bool name="allow_local_dtmf_tones">true</bool>
76
77    <!-- If true, show an onscreen "Dial" button in the dialer.
78         In practice this is used on all platforms, even the ones with hard SEND/END
79         keys, but for maximum flexibility it's controlled by a flag here
80         (which can be overridden on a per-product basis.) -->
81    <bool name="config_show_onscreen_dial_button">true</bool>
82
83    <!-- Determine whether calls to mute the microphone in PhoneUtils
84         are routed through the android.media.AudioManager class (true) or through
85         the com.android.internal.telephony.Phone interface (false). -->
86    <bool name="send_mic_mute_to_AudioManager">false</bool>
87
88    <!-- Determines if device implements a noise suppression device for in call audio-->
89    <bool name="has_in_call_noise_suppression">false</bool>
90
91    <!-- Determines if the current device should allow emergency numbers
92         to be logged in the Call Log.
93         (Some carriers require that emergency calls *not* be logged,
94         presumably to avoid the risk of accidental redialing from the
95         call log UI.  This is a good idea, so the default here is false.)
96
97         TODO: on the other hand, it might still be useful to have some
98         record of the emergency calls you've made, or to be able to look
99         up the exact date/time of an emergency call.  So perhaps we
100         *should* log those calls, but instead fix the call log to disable
101         the "call" button for emergency numbers. -->
102    <bool name="allow_emergency_numbers_in_call_log">false</bool>
103
104    <!-- If this is true, the SIM card (through Customer Service Profile EF file) will be
105         able to prevent manual operator selection. If false, this SIM setting will be
106         ignored and manual operator selection will always be available. See
107         CPHS4_2.WW6, CPHS B.4.7.1 for more information -->
108    <bool name="csp_enabled">false</bool>
109
110    <!-- If true, removes the Voice Privacy option from Call Settings -->
111    <bool name="config_voice_privacy_disable">false</bool>
112
113    <!-- Configure certain GsmUmtsOptions to be available or not. The
114         default values are in Phone/res/values/config.xml and maybe overridden
115         in operator specific resource directories or device specific overlays. -->
116    <bool name="config_apn_expand" translatable="false">true</bool>
117    <bool name="config_operator_selection_expand" translatable="false">true</bool>
118    <bool name="config_prefer_2g" translatable="false">true</bool>
119    <!-- Show enabled lte option for lte device -->
120    <bool name="config_enabled_lte" translatable="false">false</bool>
121    <!-- Show cdma auto network mode in (glabal) roaming -->
122    <bool name="config_show_cdma" translatable="false">false</bool>
123
124    <!-- Package name for the default in-call UI and dialer [DO NOT TRANSLATE] -->
125    <string name="ui_default_package" translatable="false">com.android.dialer</string>
126
127    <!-- Class name for the default main Dialer activity [DO NOT TRANSLATE] -->
128    <string name="dialer_default_class" translatable="false">com.android.dialer.DialtactsActivity</string>
129
130    <!-- CDMA activation goes through HFA -->
131    <bool name="config_use_hfa_for_provisioning">false</bool>
132
133    <!-- CDMA activation goes through OTASP.
134        TODO: This should be combined with config_use_hfa_for_provisioning and implemented
135        as an enum (NONE, HFA, OTASP). -->
136    <bool name="config_use_otasp_for_provisioning">false</bool>
137
138    <!-- Display carrier settings menu if true -->
139    <bool name="config_carrier_settings_enable">false</bool>
140    <!-- carrier settings menu -->
141    <string name="carrier_settings" translatable="false"></string>
142    <string name="carrier_settings_menu" translatable="false"></string>
143
144    <!-- Does not display additional call seting for IMS phone based on GSM Phone -->
145    <bool name="config_additional_call_setting">true</bool>
146
147    <!-- Show APN Settings for some CDMA carriers -->
148    <bool name="config_show_apn_setting_cdma">false</bool>
149
150    <!-- Allows the telephony HFA logic to run even if we're not in setup wizard. -->
151    <bool name="config_allow_hfa_outside_of_setup_wizard">true</bool>
152
153    <!-- After a CDMA conference call is merged, the swap button should be displayed. -->
154    <bool name="support_swap_after_merge" translatable="false">true</bool>
155</resources>
156