This document describes the media codec, container, and network protocol support provided by the Android platform.
As an application developer, you are free to make use of any media codec that is available on any Android-powered device, including those provided by the Android platform and those that are device-specific. However, it is a best practice to use media encoding profiles that are device-agnostic.
The following network protocols are supported for audio and video playback:
Note: HTTPS is not supported before Android 3.1.
The table below describes the media format support built into the Android platform. Note that any given mobile device may provide support for additional formats or file types not listed in the table.
Note: Media codecs that are not guaranteed to be available on all Android platform versions are accordingly noted in parentheses—for example "(Android 3.0+)".
Table 1. Core media format and codec support.
| Type | Format / Codec | Encoder | Decoder | Details | Supported File Type(s) / Container Formats |
|---|---|---|---|---|---|
| Audio | AAC LC | • | • | Support for mono/stereo/5.0/5.1 content with standard sampling rates from 8 to 48 kHz. |
• 3GPP (.3gp) • ADTS raw AAC (.aac, decode in Android 3.1+, encode in Android 4.0+, ADIF not supported) • MPEG-TS (.ts, not seekable, Android 3.0+) |
| HE-AACv1 (AAC+) | • (Android 4.1+) |
• | |||
| HE-AACv2 (enhanced AAC+) | • | Support for stereo/5.0/5.1 content with standard sampling rates from 8 to 48 kHz. | |||
| AAC ELD (enhanced low delay AAC) | • (Android 4.1+) |
• (Android 4.1+) |
Support for mono/stereo content with standard sampling rates from 16 to 48 kHz | ||
| AMR-NB | • | • | 4.75 to 12.2 kbps sampled @ 8kHz | 3GPP (.3gp) | |
| AMR-WB | • | • | 9 rates from 6.60 kbit/s to 23.85 kbit/s sampled @ 16kHz | 3GPP (.3gp) | |
| FLAC | • (Android 3.1+) |
Mono/Stereo (no multichannel). Sample rates up to 48 kHz (but up to 44.1 kHz is recommended on devices with 44.1 kHz output, as the 48 to 44.1 kHz downsampler does not include a low-pass filter). 16-bit recommended; no dither applied for 24-bit. | FLAC (.flac) only | ||
| MP3 | • | Mono/Stereo 8-320Kbps constant (CBR) or variable bit-rate (VBR) | MP3 (.mp3) | ||
| MIDI | • | MIDI Type 0 and 1. DLS Version 1 and 2. XMF and Mobile XMF. Support for ringtone formats RTTTL/RTX, OTA, and iMelody |
• Type 0 and 1 (.mid, .xmf, .mxmf) • RTTTL/RTX (.rtttl, .rtx) • OTA (.ota) • iMelody (.imy) |
||
| Vorbis | • |
• Ogg (.ogg) • Matroska (.mkv, Android 4.0+) |
|||
| PCM/WAVE | • (Android 4.1+) |
• | 8- and 16-bit linear PCM (rates up to limit of hardware). Sampling rates for raw PCM recordings at 8000, 16000 and 44100 Hz. | WAVE (.wav) | |
| Opus | • (Android 5.0+) |
Matroska (.mkv) | |||
| Image | JPEG | • | • | Base+progressive | JPEG (.jpg) |
| GIF | • | GIF (.gif) | |||
| PNG | • | • | PNG (.png) | ||
| BMP | • | BMP (.bmp) | |||
| WebP |
• (Android 4.0+) (Lossless, Transparency, Android 4.2.1+) |
• (Android 4.0+) (Lossless, Transparency, Android 4.2.1+) |
WebP (.webp) | ||
| Video | H.263 | • | • |
• 3GPP (.3gp) • MPEG-4 (.mp4) |
|
| H.264 AVC | • (Android 3.0+) |
• | Baseline Profile (BP) |
• 3GPP (.3gp) • MPEG-4 (.mp4) • MPEG-TS (.ts, AAC audio only, not seekable, Android 3.0+) |
|
| H.265 HEVC | • (Android 5.0+) |
Main Profile Level 3 for mobile devices and Main Profile Level 4.1 for Android TV |
• MPEG-4 (.mp4) | ||
| MPEG-4 SP | • | 3GPP (.3gp) | |||
| VP8 | • (Android 4.3+) |
• (Android 2.3.3+) |
Streamable only in Android 4.0 and above |
• WebM (.webm) • Matroska (.mkv, Android 4.0+) |
|
| VP9 | • (Android 4.4+) |
• WebM (.webm) • Matroska (.mkv, Android 4.0+) |
Table 2, below, lists examples of video encoding profiles and parameters that the Android media framework supports for playback in the H.264 Baseline Profile codec. While table 3 lists examples that the framework supports for playback in the VP8 media codec.
In addition to these encoding parameter recommendations, a device's available video recording profiles can be used as a proxy for media playback capabilities. These profiles can be inspected using the {@link android.media.CamcorderProfile CamcorderProfile} class, which is available since API level 8.
Table 2. Examples of supported video encoding parameters for the H.264 Baseline Profile codec.
| SD (Low quality) | SD (High quality) | HD 720p (N/A on all devices) | |
|---|---|---|---|
| Video resolution | 176 x 144 px | 480 x 360 px | 1280 x 720 px |
| Video frame rate | 12 fps | 30 fps | 30 fps |
| Video bitrate | 56 Kbps | 500 Kbps | 2 Mbps |
| Audio codec | AAC-LC | AAC-LC | AAC-LC |
| Audio channels | 1 (mono) | 2 (stereo) | 2 (stereo) |
| Audio bitrate | 24 Kbps | 128 Kbps | 192 Kbps |
Table 3. Examples of supported video encoding parameters for the VP8 codec.
| SD (Low quality) | SD (High quality) | HD 720p (N/A on all devices) | HD 1080p (N/A on all devices) | |
|---|---|---|---|---|
| Video resolution | 320 x 180 px | 640 x 360 px | 1280 x 720 px | 1920 x 1080 px |
| Video frame rate | 30 fps | 30 fps | 30 fps | 30 fps |
| Video bitrate | 800 Kbps | 2 Mbps | 4 Mbps | 10 Mbps |
For video content that is streamed over HTTP or RTSP, there are additional requirements:
moov atom must precede any mdat atoms, but must succeed the
ftyp atom.