/****************************************************************************** * * Copyright (C) 1999-2012 Broadcom Corporation * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at: * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * ******************************************************************************/ /****************************************************************************** * * this file contains GATT authentication handling functions * ******************************************************************************/ #include "bt_target.h" #include "bt_utils.h" #if BLE_INCLUDED == TRUE #include #include "gki.h" #include "gatt_int.h" #include "gatt_api.h" #include "btm_int.h" /******************************************************************************* ** ** Function gatt_sign_data ** ** Description This function sign the data for write command. ** ** Returns TRUE if encrypted, otherwise FALSE. ** *******************************************************************************/ static BOOLEAN gatt_sign_data (tGATT_CLCB *p_clcb) { tGATT_VALUE *p_attr = (tGATT_VALUE *)p_clcb->p_attr_buf; UINT8 *p_data = NULL, *p; UINT16 payload_size = p_clcb->p_tcb->payload_size; BOOLEAN status = FALSE; UINT8 *p_signature; /* do not need to mark channel securoty activity for data signing */ gatt_set_sec_act(p_clcb->p_tcb, GATT_SEC_OK); p_data = (UINT8 *)GKI_getbuf((UINT16)(p_attr->len + 3)); /* 3 = 2 byte handle + opcode */ if (p_data != NULL) { p = p_data; UINT8_TO_STREAM(p, GATT_SIGN_CMD_WRITE); UINT16_TO_STREAM(p, p_attr->handle); ARRAY_TO_STREAM(p, p_attr->value, p_attr->len); /* sign data length should be attribulte value length plus 2B handle + 1B op code */ if ((payload_size - GATT_AUTH_SIGN_LEN - 3) < p_attr->len) p_attr->len = payload_size - GATT_AUTH_SIGN_LEN - 3; p_signature = p_attr->value + p_attr->len; if (BTM_BleDataSignature(p_clcb->p_tcb->peer_bda, p_data, (UINT16)(p_attr->len + 3), /* 3 = 2 byte handle + opcode */ p_signature)) { p_attr->len += BTM_BLE_AUTH_SIGN_LEN; gatt_set_ch_state(p_clcb->p_tcb, GATT_CH_OPEN); gatt_act_write(p_clcb, GATT_SEC_SIGN_DATA); } else { gatt_end_operation(p_clcb, GATT_INTERNAL_ERROR, NULL); } GKI_freebuf(p_data); } return status; } /******************************************************************************* ** ** Function gatt_verify_signature ** ** Description This function start to verify the sign data when receiving ** the data from peer device. ** ** Returns ** *******************************************************************************/ void gatt_verify_signature(tGATT_TCB *p_tcb, BT_HDR *p_buf) { UINT16 cmd_len; UINT8 op_code; UINT8 *p, *p_orig = (UINT8 *)(p_buf + 1) + p_buf->offset; UINT32 counter; cmd_len = p_buf->len - GATT_AUTH_SIGN_LEN + 4; p = p_orig + cmd_len - 4; STREAM_TO_UINT32(counter, p); if (BTM_BleVerifySignature(p_tcb->peer_bda, p_orig, cmd_len, counter, p)) { STREAM_TO_UINT8(op_code, p_orig); gatt_server_handle_client_req (p_tcb, op_code, (UINT16)(p_buf->len - 1), p_orig); } else { /* if this is a bad signature, assume from attacker, ignore it */ GATT_TRACE_ERROR("Signature Verification Failed, data ignored"); } return; } /******************************************************************************* ** ** Function gatt_sec_check_complete ** ** Description security check complete and proceed to data sending action. ** ** Returns void. ** *******************************************************************************/ void gatt_sec_check_complete(BOOLEAN sec_check_ok, tGATT_CLCB *p_clcb, UINT8 sec_act) { if (p_clcb && p_clcb->p_tcb && GKI_queue_is_empty(&p_clcb->p_tcb->pending_enc_clcb)) gatt_set_sec_act(p_clcb->p_tcb, GATT_SEC_NONE); if (!sec_check_ok) { gatt_end_operation(p_clcb, GATT_AUTH_FAIL, NULL); } else if (p_clcb->operation == GATTC_OPTYPE_WRITE) { gatt_act_write(p_clcb, sec_act); } else if (p_clcb->operation == GATTC_OPTYPE_READ) { gatt_act_read(p_clcb, p_clcb->counter); } } /******************************************************************************* ** ** Function gatt_enc_cmpl_cback ** ** Description link encryption complete callback. ** ** Returns ** *******************************************************************************/ void gatt_enc_cmpl_cback(BD_ADDR bd_addr, tBT_TRANSPORT transport, void *p_ref_data, tBTM_STATUS result) { tGATT_TCB *p_tcb; UINT8 sec_flag; BOOLEAN status = FALSE; tGATT_PENDING_ENC_CLCB *p_buf; UINT16 count; UNUSED(p_ref_data); GATT_TRACE_DEBUG("gatt_enc_cmpl_cback"); if ((p_tcb = gatt_find_tcb_by_addr(bd_addr, transport)) != NULL) { if (gatt_get_sec_act(p_tcb) == GATT_SEC_ENC_PENDING) return; if ((p_buf = (tGATT_PENDING_ENC_CLCB *)GKI_dequeue (&p_tcb->pending_enc_clcb)) != NULL) { if (result == BTM_SUCCESS) { if (gatt_get_sec_act(p_tcb) == GATT_SEC_ENCRYPT_MITM ) { BTM_GetSecurityFlagsByTransport(bd_addr, &sec_flag, transport); if (sec_flag & BTM_SEC_FLAG_LKEY_AUTHED) { status = TRUE; } } else { status = TRUE; } } gatt_sec_check_complete(status , p_buf->p_clcb, p_tcb->sec_act); GKI_freebuf(p_buf); /* start all other pending operation in queue */ count = GKI_queue_length(&p_tcb->pending_enc_clcb); for (; count > 0; count --) { if ((p_buf = (tGATT_PENDING_ENC_CLCB *)GKI_dequeue (&p_tcb->pending_enc_clcb)) != NULL) { gatt_security_check_start(p_buf->p_clcb); GKI_freebuf(p_buf); } else break; } } else { GATT_TRACE_ERROR("Unknown operation encryption completed"); } } else { GATT_TRACE_ERROR("enc callback for unknown bd_addr"); } } /******************************************************************************* ** ** Function gatt_notify_enc_cmpl ** ** Description link encryption complete notification for all encryption process ** initiated outside GATT. ** ** Returns ** *******************************************************************************/ void gatt_notify_enc_cmpl(BD_ADDR bd_addr) { tGATT_TCB *p_tcb; tGATT_PENDING_ENC_CLCB *p_buf; UINT16 count; UINT8 i = 0; if ((p_tcb = gatt_find_tcb_by_addr(bd_addr, BT_TRANSPORT_LE)) != NULL) { for (i = 0; i < GATT_MAX_APPS; i++) { if (gatt_cb.cl_rcb[i].in_use && gatt_cb.cl_rcb[i].app_cb.p_enc_cmpl_cb) { (*gatt_cb.cl_rcb[i].app_cb.p_enc_cmpl_cb)(gatt_cb.cl_rcb[i].gatt_if, bd_addr); } } if (gatt_get_sec_act(p_tcb) == GATT_SEC_ENC_PENDING) { gatt_set_sec_act(p_tcb, GATT_SEC_NONE); count = GKI_queue_length(&p_tcb->pending_enc_clcb); for (; count > 0; count --) { if ((p_buf = (tGATT_PENDING_ENC_CLCB *)GKI_dequeue (&p_tcb->pending_enc_clcb)) != NULL) { gatt_security_check_start(p_buf->p_clcb); GKI_freebuf(p_buf); } else break; } } } else { GATT_TRACE_DEBUG("notify GATT for encryption completion of unknown device"); } return; } /******************************************************************************* ** ** Function gatt_set_sec_act ** ** Description This function set the sec_act in clcb ** ** Returns none ** *******************************************************************************/ void gatt_set_sec_act(tGATT_TCB *p_tcb, tGATT_SEC_ACTION sec_act) { if (p_tcb) { p_tcb->sec_act = sec_act; } } /******************************************************************************* ** ** Function gatt_get_sec_act ** ** Description This function get the sec_act in clcb ** ** Returns none ** *******************************************************************************/ tGATT_SEC_ACTION gatt_get_sec_act(tGATT_TCB *p_tcb) { tGATT_SEC_ACTION sec_act = GATT_SEC_NONE; if (p_tcb) { sec_act = p_tcb->sec_act; } return sec_act; } /******************************************************************************* ** ** Function gatt_determine_sec_act ** ** Description This routine determine the security action based on auth_request and ** current link status ** ** Returns tGATT_SEC_ACTION security action ** *******************************************************************************/ tGATT_SEC_ACTION gatt_determine_sec_act(tGATT_CLCB *p_clcb ) { tGATT_SEC_ACTION act = GATT_SEC_OK; UINT8 sec_flag; tGATT_TCB *p_tcb = p_clcb->p_tcb; tGATT_AUTH_REQ auth_req = p_clcb->auth_req; BOOLEAN is_link_encrypted= FALSE; BOOLEAN is_link_key_known=FALSE; BOOLEAN is_key_mitm=FALSE; UINT8 key_type; tBTM_BLE_SEC_REQ_ACT sec_act = BTM_LE_SEC_NONE; if (auth_req == GATT_AUTH_REQ_NONE ) return act; BTM_GetSecurityFlagsByTransport(p_tcb->peer_bda, &sec_flag, p_clcb->p_tcb->transport); btm_ble_link_sec_check(p_tcb->peer_bda, auth_req, &sec_act); /* if a encryption is pending, need to wait */ if (sec_act == BTM_BLE_SEC_REQ_ACT_DISCARD && auth_req != GATT_AUTH_REQ_NONE) return GATT_SEC_ENC_PENDING; if (sec_flag & (BTM_SEC_FLAG_ENCRYPTED| BTM_SEC_FLAG_LKEY_KNOWN)) { if (sec_flag & BTM_SEC_FLAG_ENCRYPTED) is_link_encrypted = TRUE; is_link_key_known = TRUE; if (sec_flag & BTM_SEC_FLAG_LKEY_AUTHED) is_key_mitm = TRUE; } /* first check link key upgrade required or not */ switch (auth_req) { case GATT_AUTH_REQ_MITM: case GATT_AUTH_REQ_SIGNED_MITM: if (!is_key_mitm) act = GATT_SEC_ENCRYPT_MITM; break; case GATT_AUTH_REQ_NO_MITM: case GATT_AUTH_REQ_SIGNED_NO_MITM: if (!is_link_key_known) act = GATT_SEC_ENCRYPT_NO_MITM; break; default: break; } /* now check link needs to be encrypted or not if the link key upgrade is not required */ if (act == GATT_SEC_OK) { if (p_tcb->transport == BT_TRANSPORT_LE && (p_clcb->operation == GATTC_OPTYPE_WRITE) && (p_clcb->op_subtype == GATT_WRITE_NO_RSP)) { /* this is a write command request check data signing required or not */ if (!is_link_encrypted) { btm_ble_get_enc_key_type(p_tcb->peer_bda, &key_type); if ( (key_type & BTM_LE_KEY_LCSRK) && ((auth_req == GATT_AUTH_REQ_SIGNED_NO_MITM) || (auth_req == GATT_AUTH_REQ_SIGNED_MITM))) { act = GATT_SEC_SIGN_DATA; } else { act = GATT_SEC_ENCRYPT; } } } else { if (!is_link_encrypted) { act = GATT_SEC_ENCRYPT; } } } return act ; } /******************************************************************************* ** ** Function gatt_get_link_encrypt_status ** ** Description This routine get the encryption status of the specified link ** ** ** Returns tGATT_STATUS link encryption status ** *******************************************************************************/ tGATT_STATUS gatt_get_link_encrypt_status(tGATT_TCB *p_tcb) { tGATT_STATUS encrypt_status = GATT_NOT_ENCRYPTED; UINT8 sec_flag=0; BTM_GetSecurityFlagsByTransport(p_tcb->peer_bda, &sec_flag, p_tcb->transport); if ((sec_flag & BTM_SEC_FLAG_ENCRYPTED) && (sec_flag & BTM_SEC_FLAG_LKEY_KNOWN)) { encrypt_status = GATT_ENCRYPED_NO_MITM; if (sec_flag & BTM_SEC_FLAG_LKEY_AUTHED) encrypt_status = GATT_ENCRYPED_MITM; } GATT_TRACE_DEBUG("gatt_get_link_encrypt_status status=0x%x",encrypt_status); return encrypt_status ; } /******************************************************************************* ** ** Function gatt_convert_sec_action ** ** Description Convert GATT security action enum into equivalent BTM BLE security action enum ** ** Returns BOOLEAN TRUE - conversation is successful ** *******************************************************************************/ static BOOLEAN gatt_convert_sec_action(tGATT_SEC_ACTION gatt_sec_act, tBTM_BLE_SEC_ACT *p_btm_sec_act ) { BOOLEAN status = TRUE; switch (gatt_sec_act) { case GATT_SEC_ENCRYPT: *p_btm_sec_act = BTM_BLE_SEC_ENCRYPT; break; case GATT_SEC_ENCRYPT_NO_MITM: *p_btm_sec_act = BTM_BLE_SEC_ENCRYPT_NO_MITM; break; case GATT_SEC_ENCRYPT_MITM: *p_btm_sec_act = BTM_BLE_SEC_ENCRYPT_MITM; break; default: status = FALSE; break; } return status; } /******************************************************************************* ** ** Function gatt_check_enc_req ** ** Description check link security. ** ** Returns TRUE if encrypted, otherwise FALSE. ** *******************************************************************************/ BOOLEAN gatt_security_check_start(tGATT_CLCB *p_clcb) { tGATT_TCB *p_tcb = p_clcb->p_tcb; tGATT_SEC_ACTION gatt_sec_act; tBTM_BLE_SEC_ACT btm_ble_sec_act; BOOLEAN status = TRUE; tBTM_STATUS btm_status; tGATT_SEC_ACTION sec_act_old = gatt_get_sec_act(p_tcb); gatt_sec_act = gatt_determine_sec_act(p_clcb); if (sec_act_old == GATT_SEC_NONE) gatt_set_sec_act(p_tcb, gatt_sec_act); switch (gatt_sec_act ) { case GATT_SEC_SIGN_DATA: GATT_TRACE_DEBUG("gatt_security_check_start: Do data signing"); gatt_sign_data(p_clcb); break; case GATT_SEC_ENCRYPT: case GATT_SEC_ENCRYPT_NO_MITM: case GATT_SEC_ENCRYPT_MITM: if (sec_act_old < GATT_SEC_ENCRYPT) { GATT_TRACE_DEBUG("gatt_security_check_start: Encrypt now or key upgreade first"); gatt_convert_sec_action(gatt_sec_act, &btm_ble_sec_act); btm_status = BTM_SetEncryption(p_tcb->peer_bda, p_tcb->transport , gatt_enc_cmpl_cback, &btm_ble_sec_act); if ( (btm_status != BTM_SUCCESS) && (btm_status != BTM_CMD_STARTED)) { GATT_TRACE_ERROR("gatt_security_check_start BTM_SetEncryption failed btm_status=%d", btm_status); status = FALSE; } } if (status) gatt_add_pending_enc_channel_clcb (p_tcb, p_clcb); break; case GATT_SEC_ENC_PENDING: gatt_add_pending_enc_channel_clcb (p_tcb, p_clcb); /* wait for link encrypotion to finish */ break; default: gatt_sec_check_complete(TRUE, p_clcb, gatt_sec_act); break; } if (status == FALSE) { gatt_set_sec_act(p_tcb, GATT_SEC_NONE); gatt_set_ch_state(p_tcb, GATT_CH_OPEN); } return status; } #endif /* BLE_INCLUDED */