1 /* 2 * Copyright (C) 2013 The Android Open Source Project 3 * 4 * Licensed under the Apache License, Version 2.0 (the "License"); 5 * you may not use this file except in compliance with the License. 6 * You may obtain a copy of the License at 7 * 8 * http://www.apache.org/licenses/LICENSE-2.0 9 * 10 * Unless required by applicable law or agreed to in writing, software 11 * distributed under the License is distributed on an "AS IS" BASIS, 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 13 * See the License for the specific language governing permissions and 14 * limitations under the License. 15 */ 16 17 package android.hardware.camera2; 18 19 import android.annotation.NonNull; 20 import android.annotation.Nullable; 21 import android.annotation.IntDef; 22 import android.hardware.camera2.params.InputConfiguration; 23 import android.hardware.camera2.params.StreamConfigurationMap; 24 import android.hardware.camera2.params.OutputConfiguration; 25 import android.os.Handler; 26 import android.view.Surface; 27 28 import java.util.List; 29 import java.lang.annotation.Retention; 30 import java.lang.annotation.RetentionPolicy; 31 32 /** 33 * <p>The CameraDevice class is a representation of a single camera connected to an 34 * Android device, allowing for fine-grain control of image capture and 35 * post-processing at high frame rates.</p> 36 * 37 * <p>Your application must declare the 38 * {@link android.Manifest.permission#CAMERA Camera} permission in its manifest 39 * in order to access camera devices.</p> 40 * 41 * <p>A given camera device may provide support at one of two levels: limited or 42 * full. If a device only supports the limited level, then Camera2 exposes a 43 * feature set that is roughly equivalent to the older 44 * {@link android.hardware.Camera Camera} API, although with a cleaner and more 45 * efficient interface. Devices that implement the full level of support 46 * provide substantially improved capabilities over the older camera 47 * API. Applications that target the limited level devices will run unchanged on 48 * the full-level devices; if your application requires a full-level device for 49 * proper operation, declare the "android.hardware.camera2.full" feature in your 50 * manifest.</p> 51 * 52 * @see CameraManager#openCamera 53 * @see android.Manifest.permission#CAMERA 54 */ 55 public abstract class CameraDevice implements AutoCloseable { 56 57 /** 58 * Create a request suitable for a camera preview window. Specifically, this 59 * means that high frame rate is given priority over the highest-quality 60 * post-processing. These requests would normally be used with the 61 * {@link CameraCaptureSession#setRepeatingRequest} method. 62 * This template is guaranteed to be supported on all camera devices. 63 * 64 * @see #createCaptureRequest 65 */ 66 public static final int TEMPLATE_PREVIEW = 1; 67 68 /** 69 * Create a request suitable for still image capture. Specifically, this 70 * means prioritizing image quality over frame rate. These requests would 71 * commonly be used with the {@link CameraCaptureSession#capture} method. 72 * This template is guaranteed to be supported on all camera devices. 73 * 74 * @see #createCaptureRequest 75 */ 76 public static final int TEMPLATE_STILL_CAPTURE = 2; 77 78 /** 79 * Create a request suitable for video recording. Specifically, this means 80 * that a stable frame rate is used, and post-processing is set for 81 * recording quality. These requests would commonly be used with the 82 * {@link CameraCaptureSession#setRepeatingRequest} method. 83 * This template is guaranteed to be supported on all camera devices. 84 * 85 * @see #createCaptureRequest 86 */ 87 public static final int TEMPLATE_RECORD = 3; 88 89 /** 90 * Create a request suitable for still image capture while recording 91 * video. Specifically, this means maximizing image quality without 92 * disrupting the ongoing recording. These requests would commonly be used 93 * with the {@link CameraCaptureSession#capture} method while a request based on 94 * {@link #TEMPLATE_RECORD} is is in use with {@link CameraCaptureSession#setRepeatingRequest}. 95 * This template is guaranteed to be supported on all camera devices except 96 * legacy devices ({@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL} 97 * {@code == }{@link CameraMetadata#INFO_SUPPORTED_HARDWARE_LEVEL_LEGACY LEGACY}) 98 * 99 * @see #createCaptureRequest 100 */ 101 public static final int TEMPLATE_VIDEO_SNAPSHOT = 4; 102 103 /** 104 * Create a request suitable for zero shutter lag still capture. This means 105 * means maximizing image quality without compromising preview frame rate. 106 * AE/AWB/AF should be on auto mode. 107 * This template is guaranteed to be supported on camera devices that support the 108 * {@link CameraMetadata#REQUEST_AVAILABLE_CAPABILITIES_PRIVATE_REPROCESSING PRIVATE_REPROCESSING} 109 * capability or the 110 * {@link CameraMetadata#REQUEST_AVAILABLE_CAPABILITIES_YUV_REPROCESSING YUV_REPROCESSING} 111 * capability. 112 * 113 * @see #createCaptureRequest 114 */ 115 public static final int TEMPLATE_ZERO_SHUTTER_LAG = 5; 116 117 /** 118 * A basic template for direct application control of capture 119 * parameters. All automatic control is disabled (auto-exposure, auto-white 120 * balance, auto-focus), and post-processing parameters are set to preview 121 * quality. The manual capture parameters (exposure, sensitivity, and so on) 122 * are set to reasonable defaults, but should be overriden by the 123 * application depending on the intended use case. 124 * This template is guaranteed to be supported on camera devices that support the 125 * {@link CameraMetadata#REQUEST_AVAILABLE_CAPABILITIES_MANUAL_SENSOR MANUAL_SENSOR} 126 * capability. 127 * 128 * @see #createCaptureRequest 129 */ 130 public static final int TEMPLATE_MANUAL = 6; 131 132 /** @hide */ 133 @Retention(RetentionPolicy.SOURCE) 134 @IntDef( 135 {TEMPLATE_PREVIEW, 136 TEMPLATE_STILL_CAPTURE, 137 TEMPLATE_RECORD, 138 TEMPLATE_VIDEO_SNAPSHOT, 139 TEMPLATE_ZERO_SHUTTER_LAG, 140 TEMPLATE_MANUAL }) 141 public @interface RequestTemplate {}; 142 143 /** 144 * Get the ID of this camera device. 145 * 146 * <p>This matches the ID given to {@link CameraManager#openCamera} to instantiate this 147 * this camera device.</p> 148 * 149 * <p>This ID can be used to query the camera device's {@link 150 * CameraCharacteristics fixed properties} with {@link 151 * CameraManager#getCameraCharacteristics}.</p> 152 * 153 * <p>This method can be called even if the device has been closed or has encountered 154 * a serious error.</p> 155 * 156 * @return the ID for this camera device 157 * 158 * @see CameraManager#getCameraCharacteristics 159 * @see CameraManager#getCameraIdList 160 */ 161 @NonNull getId()162 public abstract String getId(); 163 164 /** 165 * <p>Create a new camera capture session by providing the target output set of Surfaces to the 166 * camera device.</p> 167 * 168 * <p>The active capture session determines the set of potential output Surfaces for 169 * the camera device for each capture request. A given request may use all 170 * or only some of the outputs. Once the CameraCaptureSession is created, requests can be 171 * can be submitted with {@link CameraCaptureSession#capture capture}, 172 * {@link CameraCaptureSession#captureBurst captureBurst}, 173 * {@link CameraCaptureSession#setRepeatingRequest setRepeatingRequest}, or 174 * {@link CameraCaptureSession#setRepeatingBurst setRepeatingBurst}.</p> 175 * 176 * <p>Surfaces suitable for inclusion as a camera output can be created for 177 * various use cases and targets:</p> 178 * 179 * <ul> 180 * 181 * <li>For drawing to a {@link android.view.SurfaceView SurfaceView}: Once the SurfaceView's 182 * Surface is {@link android.view.SurfaceHolder.Callback#surfaceCreated created}, set the size 183 * of the Surface with {@link android.view.SurfaceHolder#setFixedSize} to be one of the sizes 184 * returned by {@link StreamConfigurationMap#getOutputSizes(Class) 185 * getOutputSizes(SurfaceHolder.class)} and then obtain the Surface by calling {@link 186 * android.view.SurfaceHolder#getSurface}. If the size is not set by the application, it will 187 * be rounded to the nearest supported size less than 1080p, by the camera device.</li> 188 * 189 * <li>For accessing through an OpenGL texture via a {@link android.graphics.SurfaceTexture 190 * SurfaceTexture}: Set the size of the SurfaceTexture with {@link 191 * android.graphics.SurfaceTexture#setDefaultBufferSize} to be one of the sizes returned by 192 * {@link StreamConfigurationMap#getOutputSizes(Class) getOutputSizes(SurfaceTexture.class)} 193 * before creating a Surface from the SurfaceTexture with {@link Surface#Surface}. If the size 194 * is not set by the application, it will be set to be the smallest supported size less than 195 * 1080p, by the camera device.</li> 196 * 197 * <li>For recording with {@link android.media.MediaCodec}: Call 198 * {@link android.media.MediaCodec#createInputSurface} after configuring 199 * the media codec to use one of the sizes returned by 200 * {@link StreamConfigurationMap#getOutputSizes(Class) getOutputSizes(MediaCodec.class)} 201 * </li> 202 * 203 * <li>For recording with {@link android.media.MediaRecorder}: Call 204 * {@link android.media.MediaRecorder#getSurface} after configuring the media recorder to use 205 * one of the sizes returned by 206 * {@link StreamConfigurationMap#getOutputSizes(Class) getOutputSizes(MediaRecorder.class)}, 207 * or configuring it to use one of the supported 208 * {@link android.media.CamcorderProfile CamcorderProfiles}.</li> 209 * 210 * <li>For efficient YUV processing with {@link android.renderscript}: 211 * Create a RenderScript 212 * {@link android.renderscript.Allocation Allocation} with a supported YUV 213 * type, the IO_INPUT flag, and one of the sizes returned by 214 * {@link StreamConfigurationMap#getOutputSizes(Class) getOutputSizes(Allocation.class)}, 215 * Then obtain the Surface with 216 * {@link android.renderscript.Allocation#getSurface}.</li> 217 * 218 * <li>For access to RAW, uncompressed YUV, or compressed JPEG data in the application: Create an 219 * {@link android.media.ImageReader} object with one of the supported output formats given by 220 * {@link StreamConfigurationMap#getOutputFormats()}, setting its size to one of the 221 * corresponding supported sizes by passing the chosen output format into 222 * {@link StreamConfigurationMap#getOutputSizes(int)}. Then obtain a 223 * {@link android.view.Surface} from it with {@link android.media.ImageReader#getSurface()}. 224 * If the ImageReader size is not set to a supported size, it will be rounded to a supported 225 * size less than 1080p by the camera device. 226 * </li> 227 * 228 * </ul> 229 * 230 * <p>The camera device will query each Surface's size and formats upon this 231 * call, so they must be set to a valid setting at this time.</p> 232 * 233 * <p>It can take several hundred milliseconds for the session's configuration to complete, 234 * since camera hardware may need to be powered on or reconfigured. Once the configuration is 235 * complete and the session is ready to actually capture data, the provided 236 * {@link CameraCaptureSession.StateCallback}'s 237 * {@link CameraCaptureSession.StateCallback#onConfigured} callback will be called.</p> 238 * 239 * <p>If a prior CameraCaptureSession already exists when this method is called, the previous 240 * session will no longer be able to accept new capture requests and will be closed. Any 241 * in-progress capture requests made on the prior session will be completed before it's closed. 242 * {@link CameraCaptureSession.StateListener#onConfigured} for the new session may be invoked 243 * before {@link CameraCaptureSession.StateListener#onClosed} is invoked for the prior 244 * session. Once the new session is {@link CameraCaptureSession.StateListener#onConfigured 245 * configured}, it is able to start capturing its own requests. To minimize the transition time, 246 * the {@link CameraCaptureSession#abortCaptures} call can be used to discard the remaining 247 * requests for the prior capture session before a new one is created. Note that once the new 248 * session is created, the old one can no longer have its captures aborted.</p> 249 * 250 * <p>Using larger resolution outputs, or more outputs, can result in slower 251 * output rate from the device.</p> 252 * 253 * <p>Configuring a session with an empty or null list will close the current session, if 254 * any. This can be used to release the current session's target surfaces for another use.</p> 255 * 256 * <p>While any of the sizes from {@link StreamConfigurationMap#getOutputSizes} can be used when 257 * a single output stream is configured, a given camera device may not be able to support all 258 * combination of sizes, formats, and targets when multiple outputs are configured at once. The 259 * tables below list the maximum guaranteed resolutions for combinations of streams and targets, 260 * given the capabilities of the camera device.</p> 261 * 262 * <p>If an application tries to create a session using a set of targets that exceed the limits 263 * described in the below tables, one of three possibilities may occur. First, the session may 264 * be successfully created and work normally. Second, the session may be successfully created, 265 * but the camera device won't meet the frame rate guarantees as described in 266 * {@link StreamConfigurationMap#getOutputMinFrameDuration}. Or third, if the output set 267 * cannot be used at all, session creation will fail entirely, with 268 * {@link CameraCaptureSession.StateListener#onConfigureFailed} being invoked.</p> 269 * 270 * <p>For the type column, {@code PRIV} refers to any target whose available sizes are found 271 * using {@link StreamConfigurationMap#getOutputSizes(Class)} with no direct application-visible 272 * format, {@code YUV} refers to a target Surface using the 273 * {@link android.graphics.ImageFormat#YUV_420_888} format, {@code JPEG} refers to the 274 * {@link android.graphics.ImageFormat#JPEG} format, and {@code RAW} refers to the 275 * {@link android.graphics.ImageFormat#RAW_SENSOR} format.</p> 276 * 277 * <p>For the maximum size column, {@code PREVIEW} refers to the best size match to the 278 * device's screen resolution, or to 1080p ({@code 1920x1080}), whichever is 279 * smaller. {@code RECORD} refers to the camera device's maximum supported recording resolution, 280 * as determined by {@link android.media.CamcorderProfile}. And {@code MAXIMUM} refers to the 281 * camera device's maximum output resolution for that format or target from 282 * {@link StreamConfigurationMap#getOutputSizes}.</p> 283 * 284 * <p>To use these tables, determine the number and the formats/targets of outputs needed, and 285 * find the row(s) of the table with those targets. The sizes indicate the maximum set of sizes 286 * that can be used; it is guaranteed that for those targets, the listed sizes and anything 287 * smaller from the list given by {@link StreamConfigurationMap#getOutputSizes} can be 288 * successfully used to create a session. For example, if a row indicates that a 8 megapixel 289 * (MP) YUV_420_888 output can be used together with a 2 MP {@code PRIV} output, then a session 290 * can be created with targets {@code [8 MP YUV, 2 MP PRIV]} or targets {@code [2 MP YUV, 2 MP 291 * PRIV]}; but a session with targets {@code [8 MP YUV, 4 MP PRIV]}, targets {@code [4 MP YUV, 4 292 * MP PRIV]}, or targets {@code [8 MP PRIV, 2 MP YUV]} would not be guaranteed to work, unless 293 * some other row of the table lists such a combination.</p> 294 * 295 * <style scoped> 296 * #rb { border-right-width: thick; } 297 * </style> 298 * <p>Legacy devices ({@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL} 299 * {@code == }{@link CameraMetadata#INFO_SUPPORTED_HARDWARE_LEVEL_LEGACY LEGACY}) support at 300 * least the following stream combinations: 301 * 302 * <table> 303 * <tr><th colspan="7">LEGACY-level guaranteed configurations</th></tr> 304 * <tr> <th colspan="2" id="rb">Target 1</th> <th colspan="2" id="rb">Target 2</th> <th colspan="2" id="rb">Target 3</th> <th rowspan="2">Sample use case(s)</th> </tr> 305 * <tr> <th>Type</th><th id="rb">Max size</th> <th>Type</th><th id="rb">Max size</th> <th>Type</th><th id="rb">Max size</th></tr> 306 * <tr> <td>{@code PRIV}</td><td id="rb">{@code MAXIMUM}</td> <td colspan="2" id="rb"></td> <td colspan="2" id="rb"></td> <td>Simple preview, GPU video processing, or no-preview video recording.</td> </tr> 307 * <tr> <td>{@code JPEG}</td><td id="rb">{@code MAXIMUM}</td> <td colspan="2" id="rb"></td> <td colspan="2" id="rb"></td> <td>No-viewfinder still image capture.</td> </tr> 308 * <tr> <td>{@code YUV }</td><td id="rb">{@code MAXIMUM}</td> <td colspan="2" id="rb"></td> <td colspan="2" id="rb"></td> <td>In-application video/image processing.</td> </tr> 309 * <tr> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code JPEG}</td><td id="rb">{@code MAXIMUM}</td> <td colspan="2" id="rb"></td> <td>Standard still imaging.</td> </tr> 310 * <tr> <td>{@code YUV }</td><td id="rb">{@code PREVIEW}</td> <td>{@code JPEG}</td><td id="rb">{@code MAXIMUM}</td> <td colspan="2" id="rb"></td> <td>In-app processing plus still capture.</td> </tr> 311 * <tr> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td colspan="2" id="rb"></td> <td>Standard recording.</td> </tr> 312 * <tr> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code YUV }</td><td id="rb">{@code PREVIEW}</td> <td colspan="2" id="rb"></td> <td>Preview plus in-app processing.</td> </tr> 313 * <tr> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code YUV }</td><td id="rb">{@code PREVIEW}</td> <td>{@code JPEG}</td><td id="rb">{@code MAXIMUM}</td> <td>Still capture plus in-app processing.</td> </tr> 314 * </table><br> 315 * </p> 316 * 317 * <p>Limited-capability ({@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL} 318 * {@code == }{@link CameraMetadata#INFO_SUPPORTED_HARDWARE_LEVEL_LIMITED LIMITED}) devices 319 * support at least the following stream combinations in addition to those for 320 * {@link CameraMetadata#INFO_SUPPORTED_HARDWARE_LEVEL_LEGACY LEGACY} devices: 321 * 322 * <table> 323 * <tr><th colspan="7">LIMITED-level additional guaranteed configurations</th></tr> 324 * <tr><th colspan="2" id="rb">Target 1</th><th colspan="2" id="rb">Target 2</th><th colspan="2" id="rb">Target 3</th> <th rowspan="2">Sample use case(s)</th> </tr> 325 * <tr><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th></tr> 326 * <tr> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code PRIV}</td><td id="rb">{@code RECORD }</td> <td colspan="2" id="rb"></td> <td>High-resolution video recording with preview.</td> </tr> 327 * <tr> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code YUV }</td><td id="rb">{@code RECORD }</td> <td colspan="2" id="rb"></td> <td>High-resolution in-app video processing with preview.</td> </tr> 328 * <tr> <td>{@code YUV }</td><td id="rb">{@code PREVIEW}</td> <td>{@code YUV }</td><td id="rb">{@code RECORD }</td> <td colspan="2" id="rb"></td> <td>Two-input in-app video processing.</td> </tr> 329 * <tr> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code PRIV}</td><td id="rb">{@code RECORD }</td> <td>{@code JPEG}</td><td id="rb">{@code RECORD }</td> <td>High-resolution recording with video snapshot.</td> </tr> 330 * <tr> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code YUV }</td><td id="rb">{@code RECORD }</td> <td>{@code JPEG}</td><td id="rb">{@code RECORD }</td> <td>High-resolution in-app processing with video snapshot.</td> </tr> 331 * <tr> <td>{@code YUV }</td><td id="rb">{@code PREVIEW}</td> <td>{@code YUV }</td><td id="rb">{@code PREVIEW}</td> <td>{@code JPEG}</td><td id="rb">{@code MAXIMUM}</td> <td>Two-input in-app processing with still capture.</td> </tr> 332 * </table><br> 333 * </p> 334 * 335 * <p>FULL-capability ({@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL} 336 * {@code == }{@link CameraMetadata#INFO_SUPPORTED_HARDWARE_LEVEL_FULL FULL}) devices 337 * support at least the following stream combinations in addition to those for 338 * {@link CameraMetadata#INFO_SUPPORTED_HARDWARE_LEVEL_LIMITED LIMITED} devices: 339 * 340 * <table> 341 * <tr><th colspan="7">FULL-capability additional guaranteed configurations</th></tr> 342 * <tr><th colspan="2" id="rb">Target 1</th><th colspan="2" id="rb">Target 2</th><th colspan="2" id="rb">Target 3</th> <th rowspan="2">Sample use case(s)</th> </tr> 343 * <tr><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th> </tr> 344 * <tr> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code PRIV}</td><td id="rb">{@code MAXIMUM}</td> <td colspan="2" id="rb"></td> <td>Maximum-resolution GPU processing with preview.</td> </tr> 345 * <tr> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code YUV }</td><td id="rb">{@code MAXIMUM}</td> <td colspan="2" id="rb"></td> <td>Maximum-resolution in-app processing with preview.</td> </tr> 346 * <tr> <td>{@code YUV }</td><td id="rb">{@code PREVIEW}</td> <td>{@code YUV }</td><td id="rb">{@code MAXIMUM}</td> <td colspan="2" id="rb"></td> <td>Maximum-resolution two-input in-app processsing.</td> </tr> 347 * <tr> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code JPEG}</td><td id="rb">{@code MAXIMUM}</td> <td>Video recording with maximum-size video snapshot</td> </tr> 348 * <tr> <td>{@code YUV }</td><td id="rb">{@code 640x480}</td> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code YUV }</td><td id="rb">{@code MAXIMUM}</td> <td>Standard video recording plus maximum-resolution in-app processing.</td> </tr> 349 * <tr> <td>{@code YUV }</td><td id="rb">{@code 640x480}</td> <td>{@code YUV }</td><td id="rb">{@code PREVIEW}</td> <td>{@code YUV }</td><td id="rb">{@code MAXIMUM}</td> <td>Preview plus two-input maximum-resolution in-app processing.</td> </tr> 350 * </table><br> 351 * </p> 352 * 353 * <p>RAW-capability ({@link CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES} includes 354 * {@link CameraMetadata#REQUEST_AVAILABLE_CAPABILITIES_RAW RAW}) devices additionally support 355 * at least the following stream combinations on both 356 * {@link CameraMetadata#INFO_SUPPORTED_HARDWARE_LEVEL_FULL FULL} and 357 * {@link CameraMetadata#INFO_SUPPORTED_HARDWARE_LEVEL_LIMITED LIMITED} devices: 358 * 359 * <table> 360 * <tr><th colspan="7">RAW-capability additional guaranteed configurations</th></tr> 361 * <tr><th colspan="2" id="rb">Target 1</th><th colspan="2" id="rb">Target 2</th><th colspan="2" id="rb">Target 3</th> <th rowspan="2">Sample use case(s)</th> </tr> 362 * <tr><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th> </tr> 363 * <tr> <td>{@code RAW }</td><td id="rb">{@code MAXIMUM}</td> <td colspan="2" id="rb"></td> <td colspan="2" id="rb"></td> <td>No-preview DNG capture.</td> </tr> 364 * <tr> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code RAW }</td><td id="rb">{@code MAXIMUM}</td> <td colspan="2" id="rb"></td> <td>Standard DNG capture.</td> </tr> 365 * <tr> <td>{@code YUV }</td><td id="rb">{@code PREVIEW}</td> <td>{@code RAW }</td><td id="rb">{@code MAXIMUM}</td> <td colspan="2" id="rb"></td> <td>In-app processing plus DNG capture.</td> </tr> 366 * <tr> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code RAW }</td><td id="rb">{@code MAXIMUM}</td> <td>Video recording with DNG capture.</td> </tr> 367 * <tr> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code YUV }</td><td id="rb">{@code PREVIEW}</td> <td>{@code RAW }</td><td id="rb">{@code MAXIMUM}</td> <td>Preview with in-app processing and DNG capture.</td> </tr> 368 * <tr> <td>{@code YUV }</td><td id="rb">{@code PREVIEW}</td> <td>{@code YUV }</td><td id="rb">{@code PREVIEW}</td> <td>{@code RAW }</td><td id="rb">{@code MAXIMUM}</td> <td>Two-input in-app processing plus DNG capture.</td> </tr> 369 * <tr> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code JPEG}</td><td id="rb">{@code MAXIMUM}</td> <td>{@code RAW }</td><td id="rb">{@code MAXIMUM}</td> <td>Still capture with simultaneous JPEG and DNG.</td> </tr> 370 * <tr> <td>{@code YUV }</td><td id="rb">{@code PREVIEW}</td> <td>{@code JPEG}</td><td id="rb">{@code MAXIMUM}</td> <td>{@code RAW }</td><td id="rb">{@code MAXIMUM}</td> <td>In-app processing with simultaneous JPEG and DNG.</td> </tr> 371 * </table><br> 372 * </p> 373 * 374 * <p>BURST-capability ({@link CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES} includes 375 * {@link CameraMetadata#REQUEST_AVAILABLE_CAPABILITIES_BURST_CAPTURE BURST_CAPTURE}) devices 376 * support at least the below stream combinations in addition to those for 377 * {@link CameraMetadata#INFO_SUPPORTED_HARDWARE_LEVEL_LIMITED LIMITED} devices. Note that all 378 * FULL-level devices support the BURST capability, and the below list is a strict subset of the 379 * list for FULL-level devices, so this table is only relevant for LIMITED-level devices that 380 * support the BURST_CAPTURE capability. 381 * 382 * <table> 383 * <tr><th colspan="5">BURST-capability additional guaranteed configurations</th></tr> 384 * <tr><th colspan="2" id="rb">Target 1</th><th colspan="2" id="rb">Target 2</th><th rowspan="2">Sample use case(s)</th> </tr> 385 * <tr><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th> </tr> 386 * <tr> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code PRIV}</td><td id="rb">{@code MAXIMUM}</td> <td>Maximum-resolution GPU processing with preview.</td> </tr> 387 * <tr> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code YUV }</td><td id="rb">{@code MAXIMUM}</td> <td>Maximum-resolution in-app processing with preview.</td> </tr> 388 * <tr> <td>{@code YUV }</td><td id="rb">{@code PREVIEW}</td> <td>{@code YUV }</td><td id="rb">{@code MAXIMUM}</td> <td>Maximum-resolution two-input in-app processsing.</td> </tr> 389 * </table><br> 390 * </p> 391 * 392 * <p>Since the capabilities of camera devices vary greatly, a given camera device may support 393 * target combinations with sizes outside of these guarantees, but this can only be tested for 394 * by attempting to create a session with such targets.</p> 395 * 396 * @param outputs The new set of Surfaces that should be made available as 397 * targets for captured image data. 398 * @param callback The callback to notify about the status of the new capture session. 399 * @param handler The handler on which the callback should be invoked, or {@code null} to use 400 * the current thread's {@link android.os.Looper looper}. 401 * 402 * @throws IllegalArgumentException if the set of output Surfaces do not meet the requirements, 403 * the callback is null, or the handler is null but the current 404 * thread has no looper. 405 * @throws CameraAccessException if the camera device is no longer connected or has 406 * encountered a fatal error 407 * @throws IllegalStateException if the camera device has been closed 408 * 409 * @see CameraCaptureSession 410 * @see StreamConfigurationMap#getOutputFormats() 411 * @see StreamConfigurationMap#getOutputSizes(int) 412 * @see StreamConfigurationMap#getOutputSizes(Class) 413 */ createCaptureSession(@onNull List<Surface> outputs, @NonNull CameraCaptureSession.StateCallback callback, @Nullable Handler handler)414 public abstract void createCaptureSession(@NonNull List<Surface> outputs, 415 @NonNull CameraCaptureSession.StateCallback callback, @Nullable Handler handler) 416 throws CameraAccessException; 417 418 /** 419 * <p>Create a new camera capture session by providing the target output set of Surfaces and 420 * its corresponding surface configuration to the camera device.</p> 421 * 422 * @see #createCaptureSession 423 * @see OutputConfiguration 424 * 425 * @hide 426 */ createCaptureSessionByOutputConfiguration( List<OutputConfiguration> outputConfigurations, CameraCaptureSession.StateCallback callback, Handler handler)427 public abstract void createCaptureSessionByOutputConfiguration( 428 List<OutputConfiguration> outputConfigurations, 429 CameraCaptureSession.StateCallback callback, Handler handler) 430 throws CameraAccessException; 431 /** 432 * Create a new reprocessable camera capture session by providing the desired reprocessing 433 * input Surface configuration and the target output set of Surfaces to the camera device. 434 * 435 * <p>If a camera device supports YUV reprocessing 436 * ({@link CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES_YUV_REPROCESSING}) or PRIVATE 437 * reprocessing 438 * ({@link CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES_PRIVATE_REPROCESSING}), besides 439 * the capture session created via {@link #createCaptureSession createCaptureSession}, the 440 * application can also create a reprocessable capture session to submit reprocess capture 441 * requests in addition to regular capture requests. A reprocess capture request takes the next 442 * available buffer from the session's input Surface, and sends it through the camera device's 443 * processing pipeline again, to produce buffers for the request's target output Surfaces. No 444 * new image data is captured for a reprocess request. However the input buffer provided by 445 * the application must be captured previously by the same camera device in the same session 446 * directly (e.g. for Zero-Shutter-Lag use case) or indirectly (e.g. combining multiple output 447 * images).</p> 448 * 449 * <p>The active reprocessable capture session determines an input {@link Surface} and the set 450 * of potential output Surfaces for the camera devices for each capture request. The application 451 * can use {@link #createCaptureRequest createCaptureRequest} to create regular capture requests 452 * to capture new images from the camera device, and use {@link #createReprocessCaptureRequest 453 * createReprocessCaptureRequest} to create reprocess capture requests to process buffers from 454 * the input {@link Surface}. Some combinations of output Surfaces in a session may not be used 455 * in a request simultaneously. The guaranteed combinations of output Surfaces that can be used 456 * in a request simultaneously are listed in the tables under {@link #createCaptureSession 457 * createCaptureSession}. All the output Surfaces in one capture request will come from the 458 * same source, either from a new capture by the camera device, or from the input Surface 459 * depending on if the request is a reprocess capture request.</p> 460 * 461 * <p>Input formats and sizes supported by the camera device can be queried via 462 * {@link StreamConfigurationMap#getInputFormats} and 463 * {@link StreamConfigurationMap#getInputSizes}. For each supported input format, the camera 464 * device supports a set of output formats and sizes for reprocessing that can be queried via 465 * {@link StreamConfigurationMap#getValidOutputFormatsForInput} and 466 * {@link StreamConfigurationMap#getOutputSizes}. While output Surfaces with formats that 467 * aren't valid reprocess output targets for the input configuration can be part of a session, 468 * they cannot be used as targets for a reprocessing request.</p> 469 * 470 * <p>Since the application cannot access {@link android.graphics.ImageFormat#PRIVATE} images 471 * directly, an output Surface created by {@link android.media.ImageReader#newInstance} with 472 * {@link android.graphics.ImageFormat#PRIVATE} as the format will be considered as intended to 473 * be used for reprocessing input and thus the {@link android.media.ImageReader} size must 474 * match one of the supported input sizes for {@link android.graphics.ImageFormat#PRIVATE} 475 * format. Otherwise, creating a reprocessable capture session will fail.</p> 476 * 477 * <p>The guaranteed stream configurations listed in 478 * {@link #createCaptureSession createCaptureSession} are also guaranteed to work for 479 * {@link #createReprocessableCaptureSession createReprocessableCaptureSession}. In addition, 480 * the configurations in the tables below are also guaranteed for creating a reprocessable 481 * capture session if the camera device supports YUV reprocessing or PRIVATE reprocessing. 482 * However, not all output targets used to create a reprocessable session may be used in a 483 * {@link CaptureRequest} simultaneously. For devices that support only 1 output target in a 484 * reprocess {@link CaptureRequest}, submitting a reprocess {@link CaptureRequest} with multiple 485 * output targets will result in a {@link CaptureFailure}. For devices that support multiple 486 * output targets in a reprocess {@link CaptureRequest}, the guaranteed output targets that can 487 * be included in a {@link CaptureRequest} simultaneously are listed in the tables under 488 * {@link #createCaptureSession createCaptureSession}. For example, with a FULL-capability 489 * ({@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL} {@code == } 490 * {@link CameraMetadata#INFO_SUPPORTED_HARDWARE_LEVEL_FULL FULL}) device that supports PRIVATE 491 * reprocessing, an application can create a reprocessable capture session with 1 input, 492 * ({@code PRIV}, {@code MAXIMUM}), and 3 outputs, ({@code PRIV}, {@code MAXIMUM}), 493 * ({@code PRIV}, {@code PREVIEW}), and ({@code YUV}, {@code MAXIMUM}). However, it's not 494 * guaranteed that an application can submit a regular or reprocess capture with ({@code PRIV}, 495 * {@code MAXIMUM}) and ({@code YUV}, {@code MAXIMUM}) outputs based on the table listed under 496 * {@link #createCaptureSession createCaptureSession}. In other words, use the tables below to 497 * determine the guaranteed stream configurations for creating a reprocessable capture session, 498 * and use the tables under {@link #createCaptureSession createCaptureSession} to determine the 499 * guaranteed output targets that can be submitted in a regular or reprocess 500 * {@link CaptureRequest} simultaneously.</p> 501 * 502 * <style scoped> 503 * #rb { border-right-width: thick; } 504 * </style> 505 * 506 * <p>Limited-capability ({@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL} 507 * {@code == }{@link CameraMetadata#INFO_SUPPORTED_HARDWARE_LEVEL_LIMITED LIMITED}) devices 508 * support at least the following stream combinations for creating a reprocessable capture 509 * session in addition to those listed in {@link #createCaptureSession createCaptureSession} for 510 * {@link CameraMetadata#INFO_SUPPORTED_HARDWARE_LEVEL_LIMITED LIMITED} devices: 511 * 512 * <table> 513 * <tr><th colspan="11">LIMITED-level additional guaranteed configurations for creating a reprocessable capture session<br>({@code PRIV} input is guaranteed only if PRIVATE reprocessing is supported. {@code YUV} input is guaranteed only if YUV reprocessing is supported)</th></tr> 514 * <tr><th colspan="2" id="rb">Input</th><th colspan="2" id="rb">Target 1</th><th colspan="2" id="rb">Target 2</th><th colspan="2" id="rb">Target 3</th><th colspan="2" id="rb">Target 4</th><th rowspan="2">Sample use case(s)</th> </tr> 515 * <tr><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th></tr> 516 * <tr> <td>{@code PRIV}/{@code YUV}</td><td id="rb">{@code MAXIMUM}</td> <td>Same as input</td><td id="rb">{@code MAXIMUM}</td> <td>{@code JPEG}</td><td id="rb">{@code MAXIMUM}</td> <td></td><td id="rb"></td> <td></td><td id="rb"></td> <td>No-viewfinder still image reprocessing.</td> </tr> 517 * <tr> <td>{@code PRIV}/{@code YUV}</td><td id="rb">{@code MAXIMUM}</td> <td>Same as input</td><td id="rb">{@code MAXIMUM}</td> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code JPEG}</td><td id="rb">{@code MAXIMUM}</td> <td></td><td id="rb"></td> <td>ZSL(Zero-Shutter-Lag) still imaging.</td> </tr> 518 * <tr> <td>{@code PRIV}/{@code YUV}</td><td id="rb">{@code MAXIMUM}</td> <td>Same as input</td><td id="rb">{@code MAXIMUM}</td> <td>{@code YUV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code JPEG}</td><td id="rb">{@code MAXIMUM}</td> <td></td><td id="rb"></td> <td>ZSL still and in-app processing imaging.</td> </tr> 519 * <tr> <td>{@code PRIV}/{@code YUV}</td><td id="rb">{@code MAXIMUM}</td> <td>Same as input</td><td id="rb">{@code MAXIMUM}</td> <td>{@code YUV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code YUV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code JPEG}</td><td id="rb">{@code MAXIMUM}</td> <td>ZSL in-app processing with still capture.</td> </tr> 520 * </table><br> 521 * </p> 522 * 523 * <p>FULL-capability ({@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL} 524 * {@code == }{@link CameraMetadata#INFO_SUPPORTED_HARDWARE_LEVEL_FULL FULL}) devices 525 * support at least the following stream combinations for creating a reprocessable capture 526 * session in addition to those for 527 * {@link CameraMetadata#INFO_SUPPORTED_HARDWARE_LEVEL_LIMITED LIMITED} devices: 528 * 529 * <table> 530 * <tr><th colspan="11">FULL-capability additional guaranteed configurations for creating a reprocessable capture session<br>({@code PRIV} input is guaranteed only if PRIVATE reprocessing is supported. {@code YUV} input is guaranteed only if YUV reprocessing is supported)</th></tr> 531 * <tr><th colspan="2" id="rb">Input</th><th colspan="2" id="rb">Target 1</th><th colspan="2" id="rb">Target 2</th><th colspan="2" id="rb">Target 3</th><th colspan="2" id="rb">Target 4</th><th rowspan="2">Sample use case(s)</th> </tr> 532 * <tr><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th></tr> 533 * <tr> <td>{@code YUV}</td><td id="rb">{@code MAXIMUM}</td> <td>{@code YUV}</td><td id="rb">{@code MAXIMUM}</td> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td></td><td id="rb"></td> <td></td><td id="rb"></td> <td>Maximum-resolution multi-frame image fusion in-app processing with regular preview.</td> </tr> 534 * <tr> <td>{@code YUV}</td><td id="rb">{@code MAXIMUM}</td> <td>{@code YUV}</td><td id="rb">{@code MAXIMUM}</td> <td>{@code YUV}</td><td id="rb">{@code PREVIEW}</td> <td></td><td id="rb"></td> <td></td><td id="rb"></td> <td>Maximum-resolution multi-frame image fusion two-input in-app processing.</td> </tr> 535 * <tr> <td>{@code PRIV}/{@code YUV}</td><td id="rb">{@code MAXIMUM}</td> <td>Same as input</td><td id="rb">{@code MAXIMUM}</td> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code YUV}</td><td id="rb">{@code RECORD}</td> <td></td><td id="rb"></td> <td>High-resolution ZSL in-app video processing with regular preview.</td> </tr> 536 * <tr> <td>{@code PRIV}</td><td id="rb">{@code MAXIMUM}</td> <td>{@code PRIV}</td><td id="rb">{@code MAXIMUM}</td> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code YUV}</td><td id="rb">{@code MAXIMUM}</td> <td></td><td id="rb"></td> <td>Maximum-resolution ZSL in-app processing with regular preview.</td> </tr> 537 * <tr> <td>{@code PRIV}</td><td id="rb">{@code MAXIMUM}</td> <td>{@code PRIV}</td><td id="rb">{@code MAXIMUM}</td> <td>{@code YUV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code YUV}</td><td id="rb">{@code MAXIMUM}</td> <td></td><td id="rb"></td> <td>Maximum-resolution two-input ZSL in-app processing.</td> </tr> 538 * <tr> <td>{@code PRIV}/{@code YUV}</td><td id="rb">{@code MAXIMUM}</td> <td>Same as input</td><td id="rb">{@code MAXIMUM}</td> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code YUV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code JPEG}</td><td id="rb">{@code MAXIMUM}</td> <td>ZSL still capture and in-app processing.</td> </tr> 539 * </table><br> 540 * </p> 541 * 542 * <p>RAW-capability ({@link CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES} includes 543 * {@link CameraMetadata#REQUEST_AVAILABLE_CAPABILITIES_RAW RAW}) devices additionally support 544 * at least the following stream combinations for creating a reprocessable capture session 545 * on both {@link CameraMetadata#INFO_SUPPORTED_HARDWARE_LEVEL_FULL FULL} and 546 * {@link CameraMetadata#INFO_SUPPORTED_HARDWARE_LEVEL_LIMITED LIMITED} devices 547 * 548 * <table> 549 * <tr><th colspan="11">RAW-capability additional guaranteed configurations for creating a reprocessable capture session<br>({@code PRIV} input is guaranteed only if PRIVATE reprocessing is supported. {@code YUV} input is guaranteed only if YUV reprocessing is supported)</th></tr> 550 * <tr><th colspan="2" id="rb">Input</th><th colspan="2" id="rb">Target 1</th><th colspan="2" id="rb">Target 2</th><th colspan="2" id="rb">Target 3</th><th colspan="2" id="rb">Target 4</th><th rowspan="2">Sample use case(s)</th> </tr> 551 * <tr><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th></tr> 552 * <tr> <td>{@code PRIV}/{@code YUV}</td><td id="rb">{@code MAXIMUM}</td> <td>Same as input</td><td id="rb">{@code MAXIMUM}</td> <td>{@code YUV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code RAW}</td><td id="rb">{@code MAXIMUM}</td> <td></td><td id="rb"></td> <td>Mutually exclusive ZSL in-app processing and DNG capture.</td> </tr> 553 * <tr> <td>{@code PRIV}/{@code YUV}</td><td id="rb">{@code MAXIMUM}</td> <td>Same as input</td><td id="rb">{@code MAXIMUM}</td> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code YUV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code RAW}</td><td id="rb">{@code MAXIMUM}</td> <td>Mutually exclusive ZSL in-app processing and preview with DNG capture.</td> </tr> 554 * <tr> <td>{@code PRIV}/{@code YUV}</td><td id="rb">{@code MAXIMUM}</td> <td>Same as input</td><td id="rb">{@code MAXIMUM}</td> <td>{@code YUV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code YUV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code RAW}</td><td id="rb">{@code MAXIMUM}</td> <td>Mutually exclusive ZSL two-input in-app processing and DNG capture.</td> </tr> 555 * <tr> <td>{@code PRIV}/{@code YUV}</td><td id="rb">{@code MAXIMUM}</td> <td>Same as input</td><td id="rb">{@code MAXIMUM}</td> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code JPEG}</td><td id="rb">{@code MAXIMUM}</td> <td>{@code RAW}</td><td id="rb">{@code MAXIMUM}</td> <td>Mutually exclusive ZSL still capture and preview with DNG capture.</td> </tr> 556 * <tr> <td>{@code PRIV}/{@code YUV}</td><td id="rb">{@code MAXIMUM}</td> <td>Same as input</td><td id="rb">{@code MAXIMUM}</td> <td>{@code YUV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code JPEG}</td><td id="rb">{@code MAXIMUM}</td> <td>{@code RAW}</td><td id="rb">{@code MAXIMUM}</td> <td>Mutually exclusive ZSL in-app processing with still capture and DNG capture.</td> </tr> 557 * </table><br> 558 * </p> 559 * 560 * @param inputConfig The configuration for the input {@link Surface} 561 * @param outputs The new set of Surfaces that should be made available as 562 * targets for captured image data. 563 * @param callback The callback to notify about the status of the new capture session. 564 * @param handler The handler on which the callback should be invoked, or {@code null} to use 565 * the current thread's {@link android.os.Looper looper}. 566 * 567 * @throws IllegalArgumentException if the input configuration is null or not supported, the set 568 * of output Surfaces do not meet the requirements, the 569 * callback is null, or the handler is null but the current 570 * thread has no looper. 571 * @throws CameraAccessException if the camera device is no longer connected or has 572 * encountered a fatal error 573 * @throws IllegalStateException if the camera device has been closed 574 * 575 * @see #createCaptureSession 576 * @see CameraCaptureSession 577 * @see StreamConfigurationMap#getInputFormats 578 * @see StreamConfigurationMap#getInputSizes 579 * @see StreamConfigurationMap#getValidOutputFormatsForInput 580 * @see StreamConfigurationMap#getOutputSizes 581 * @see android.media.ImageWriter 582 * @see android.media.ImageReader 583 */ createReprocessableCaptureSession(@onNull InputConfiguration inputConfig, @NonNull List<Surface> outputs, @NonNull CameraCaptureSession.StateCallback callback, @Nullable Handler handler)584 public abstract void createReprocessableCaptureSession(@NonNull InputConfiguration inputConfig, 585 @NonNull List<Surface> outputs, @NonNull CameraCaptureSession.StateCallback callback, 586 @Nullable Handler handler) 587 throws CameraAccessException; 588 589 /** 590 * <p>Create a new constrained high speed capture session.</p> 591 * 592 * <p>The application can use normal capture session (created via {@link #createCaptureSession}) 593 * for high speed capture if the desired high speed FPS ranges are advertised by 594 * {@link CameraCharacteristics#CONTROL_AE_AVAILABLE_TARGET_FPS_RANGES}, in which case all API 595 * semantics associated with normal capture sessions applies.</p> 596 * 597 * <p>The method creates a specialized capture session that is only targeted at high speed 598 * video recording (>=120fps) use case if the camera device supports high speed video 599 * capability (i.e., {@link CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES} contains 600 * {@link CameraMetadata#REQUEST_AVAILABLE_CAPABILITIES_CONSTRAINED_HIGH_SPEED_VIDEO}). 601 * Therefore, it has special characteristics compared with a normal capture session:</p> 602 * 603 * <ul> 604 * 605 * <li>In addition to the output target Surface requirements specified by the 606 * {@link #createCaptureSession} method, an active high speed capture session will support up 607 * to 2 output Surfaces, though the application might choose to configure just one Surface 608 * (e.g., preview only). All Surfaces must be either video encoder surfaces (acquired by 609 * {@link android.media.MediaRecorder#getSurface} or 610 * {@link android.media.MediaCodec#createInputSurface}) or preview surfaces (obtained from 611 * {@link android.view.SurfaceView}, {@link android.graphics.SurfaceTexture} via 612 * {@link android.view.Surface#Surface(android.graphics.SurfaceTexture)}). The Surface sizes 613 * must be one of the sizes reported by {@link StreamConfigurationMap#getHighSpeedVideoSizes}. 614 * When multiple Surfaces are configured, their size must be same.</li> 615 * 616 * <li>An active high speed capture session only accepts request lists created via 617 * {@link CameraConstrainedHighSpeedCaptureSession#createHighSpeedRequestList}, and the 618 * request list can only be submitted to this session via 619 * {@link CameraCaptureSession#captureBurst captureBurst}, or 620 * {@link CameraCaptureSession#setRepeatingBurst setRepeatingBurst}.</li> 621 * 622 * <li>The FPS ranges being requested to this session must be selected from 623 * {@link StreamConfigurationMap#getHighSpeedVideoFpsRangesFor}. The application can still use 624 * {@link CaptureRequest#CONTROL_AE_TARGET_FPS_RANGE} to control the desired FPS range. 625 * Switching to an FPS range that has different 626 * {@link android.util.Range#getUpper() maximum FPS} may trigger some camera device 627 * reconfigurations, which may introduce extra latency. It is recommended that the 628 * application avoids unnecessary maximum target FPS changes as much as possible during high 629 * speed streaming.</li> 630 * 631 * <li>For the request lists submitted to this session, the camera device will override the 632 * {@link CaptureRequest#CONTROL_MODE control mode}, auto-exposure (AE), auto-white balance 633 * (AWB) and auto-focus (AF) to {@link CameraMetadata#CONTROL_MODE_AUTO}, 634 * {@link CameraMetadata#CONTROL_AE_MODE_ON}, {@link CameraMetadata#CONTROL_AWB_MODE_AUTO} 635 * and {@link CameraMetadata#CONTROL_AF_MODE_CONTINUOUS_VIDEO}, respectively. All 636 * post-processing block mode controls will be overridden to be FAST. Therefore, no manual 637 * control of capture and post-processing parameters is possible. Beside these, only a subset 638 * of controls will work, see 639 * {@link CameraMetadata#REQUEST_AVAILABLE_CAPABILITIES_CONSTRAINED_HIGH_SPEED_VIDEO} for 640 * more details.</li> 641 * 642 * </ul> 643 * 644 * @param outputs The new set of Surfaces that should be made available as 645 * targets for captured high speed image data. 646 * @param callback The callback to notify about the status of the new capture session. 647 * @param handler The handler on which the callback should be invoked, or {@code null} to use 648 * the current thread's {@link android.os.Looper looper}. 649 * 650 * @throws IllegalArgumentException if the set of output Surfaces do not meet the requirements, 651 * the callback is null, or the handler is null but the current 652 * thread has no looper, or the camera device doesn't support 653 * high speed video capability. 654 * @throws CameraAccessException if the camera device is no longer connected or has 655 * encountered a fatal error 656 * @throws IllegalStateException if the camera device has been closed 657 * 658 * @see #createCaptureSession 659 * @see CaptureRequest#CONTROL_AE_TARGET_FPS_RANGE 660 * @see StreamConfigurationMap#getHighSpeedVideoSizes 661 * @see StreamConfigurationMap#getHighSpeedVideoFpsRangesFor 662 * @see CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES 663 * @see CameraMetadata#REQUEST_AVAILABLE_CAPABILITIES_CONSTRAINED_HIGH_SPEED_VIDEO 664 * @see CameraCaptureSession#captureBurst 665 * @see CameraCaptureSession#setRepeatingBurst 666 * @see CameraConstrainedHighSpeedCaptureSession#createHighSpeedRequestList 667 */ createConstrainedHighSpeedCaptureSession(@onNull List<Surface> outputs, @NonNull CameraCaptureSession.StateCallback callback, @Nullable Handler handler)668 public abstract void createConstrainedHighSpeedCaptureSession(@NonNull List<Surface> outputs, 669 @NonNull CameraCaptureSession.StateCallback callback, 670 @Nullable Handler handler) 671 throws CameraAccessException; 672 673 /** 674 * <p>Create a {@link CaptureRequest.Builder} for new capture requests, 675 * initialized with template for a target use case. The settings are chosen 676 * to be the best options for the specific camera device, so it is not 677 * recommended to reuse the same request for a different camera device; 678 * create a builder specific for that device and template and override the 679 * settings as desired, instead.</p> 680 * 681 * @param templateType An enumeration selecting the use case for this 682 * request; one of the CameraDevice.TEMPLATE_ values. Not all template 683 * types are supported on every device. See the documentation for each 684 * template type for details. 685 * @return a builder for a capture request, initialized with default 686 * settings for that template, and no output streams 687 * 688 * @throws IllegalArgumentException if the templateType is not supported by 689 * this device. 690 * @throws CameraAccessException if the camera device is no longer connected or has 691 * encountered a fatal error 692 * @throws IllegalStateException if the camera device has been closed 693 * 694 * @see #TEMPLATE_PREVIEW 695 * @see #TEMPLATE_RECORD 696 * @see #TEMPLATE_STILL_CAPTURE 697 * @see #TEMPLATE_VIDEO_SNAPSHOT 698 * @see #TEMPLATE_MANUAL 699 */ 700 @NonNull createCaptureRequest(@equestTemplate int templateType)701 public abstract CaptureRequest.Builder createCaptureRequest(@RequestTemplate int templateType) 702 throws CameraAccessException; 703 704 /** 705 * <p>Create a {@link CaptureRequest.Builder} for a new reprocess {@link CaptureRequest} from a 706 * {@link TotalCaptureResult}. 707 * 708 * <p>Each reprocess {@link CaptureRequest} processes one buffer from 709 * {@link CameraCaptureSession}'s input {@link Surface} to all output {@link Surface Surfaces} 710 * included in the reprocess capture request. The reprocess input images must be generated from 711 * one or multiple output images captured from the same camera device. The application can 712 * provide input images to camera device via {@link android.media.ImageWriter#queueInputImage}. 713 * The application must use the capture result of one of those output images to create a 714 * reprocess capture request so that the camera device can use the information to achieve 715 * optimal reprocess image quality. For camera devices that support only 1 output 716 * {@link Surface}, submitting a reprocess {@link CaptureRequest} with multiple 717 * output targets will result in a {@link CaptureFailure}. 718 * 719 * @param inputResult The capture result of the output image or one of the output images used 720 * to generate the reprocess input image for this capture request. 721 * 722 * @throws IllegalArgumentException if inputResult is null. 723 * @throws CameraAccessException if the camera device is no longer connected or has 724 * encountered a fatal error 725 * @throws IllegalStateException if the camera device has been closed 726 * 727 * @see CaptureRequest.Builder 728 * @see TotalCaptureResult 729 * @see CameraDevice#createReprocessableCaptureSession 730 * @see android.media.ImageWriter 731 */ 732 @NonNull createReprocessCaptureRequest( @onNull TotalCaptureResult inputResult)733 public abstract CaptureRequest.Builder createReprocessCaptureRequest( 734 @NonNull TotalCaptureResult inputResult) throws CameraAccessException; 735 736 /** 737 * Close the connection to this camera device as quickly as possible. 738 * 739 * <p>Immediately after this call, all calls to the camera device or active session interface 740 * will throw a {@link IllegalStateException}, except for calls to close(). Once the device has 741 * fully shut down, the {@link StateCallback#onClosed} callback will be called, and the camera 742 * is free to be re-opened.</p> 743 * 744 * <p>Immediately after this call, besides the final {@link StateCallback#onClosed} calls, no 745 * further callbacks from the device or the active session will occur, and any remaining 746 * submitted capture requests will be discarded, as if 747 * {@link CameraCaptureSession#abortCaptures} had been called, except that no success or failure 748 * callbacks will be invoked.</p> 749 * 750 */ 751 @Override close()752 public abstract void close(); 753 754 /** 755 * A callback objects for receiving updates about the state of a camera device. 756 * 757 * <p>A callback instance must be provided to the {@link CameraManager#openCamera} method to 758 * open a camera device.</p> 759 * 760 * <p>These state updates include notifications about the device completing startup ( 761 * allowing for {@link #createCaptureSession} to be called), about device 762 * disconnection or closure, and about unexpected device errors.</p> 763 * 764 * <p>Events about the progress of specific {@link CaptureRequest CaptureRequests} are provided 765 * through a {@link CameraCaptureSession.CaptureCallback} given to the 766 * {@link CameraCaptureSession#capture}, {@link CameraCaptureSession#captureBurst}, 767 * {@link CameraCaptureSession#setRepeatingRequest}, or 768 * {@link CameraCaptureSession#setRepeatingBurst} methods. 769 * 770 * @see CameraManager#openCamera 771 */ 772 public static abstract class StateCallback { 773 /** 774 * An error code that can be reported by {@link #onError} 775 * indicating that the camera device is in use already. 776 * 777 * <p> 778 * This error can be produced when opening the camera fails due to the camera 779 * being used by a higher-priority camera API client. 780 * </p> 781 * 782 * @see #onError 783 */ 784 public static final int ERROR_CAMERA_IN_USE = 1; 785 786 /** 787 * An error code that can be reported by {@link #onError} 788 * indicating that the camera device could not be opened 789 * because there are too many other open camera devices. 790 * 791 * <p> 792 * The system-wide limit for number of open cameras has been reached, 793 * and more camera devices cannot be opened until previous instances are 794 * closed. 795 * </p> 796 * 797 * <p> 798 * This error can be produced when opening the camera fails. 799 * </p> 800 * 801 * @see #onError 802 */ 803 public static final int ERROR_MAX_CAMERAS_IN_USE = 2; 804 805 /** 806 * An error code that can be reported by {@link #onError} 807 * indicating that the camera device could not be opened due to a device 808 * policy. 809 * 810 * @see android.app.admin.DevicePolicyManager#setCameraDisabled(android.content.ComponentName, boolean) 811 * @see #onError 812 */ 813 public static final int ERROR_CAMERA_DISABLED = 3; 814 815 /** 816 * An error code that can be reported by {@link #onError} 817 * indicating that the camera device has encountered a fatal error. 818 * 819 * <p>The camera device needs to be re-opened to be used again.</p> 820 * 821 * @see #onError 822 */ 823 public static final int ERROR_CAMERA_DEVICE = 4; 824 825 /** 826 * An error code that can be reported by {@link #onError} 827 * indicating that the camera service has encountered a fatal error. 828 * 829 * <p>The Android device may need to be shut down and restarted to restore 830 * camera function, or there may be a persistent hardware problem.</p> 831 * 832 * <p>An attempt at recovery <i>may</i> be possible by closing the 833 * CameraDevice and the CameraManager, and trying to acquire all resources 834 * again from scratch.</p> 835 * 836 * @see #onError 837 */ 838 public static final int ERROR_CAMERA_SERVICE = 5; 839 840 /** @hide */ 841 @Retention(RetentionPolicy.SOURCE) 842 @IntDef( 843 {ERROR_CAMERA_IN_USE, 844 ERROR_MAX_CAMERAS_IN_USE, 845 ERROR_CAMERA_DISABLED, 846 ERROR_CAMERA_DEVICE, 847 ERROR_CAMERA_SERVICE }) 848 public @interface ErrorCode {}; 849 850 /** 851 * The method called when a camera device has finished opening. 852 * 853 * <p>At this point, the camera device is ready to use, and 854 * {@link CameraDevice#createCaptureSession} can be called to set up the first capture 855 * session.</p> 856 * 857 * @param camera the camera device that has become opened 858 */ onOpened(@onNull CameraDevice camera)859 public abstract void onOpened(@NonNull CameraDevice camera); // Must implement 860 861 /** 862 * The method called when a camera device has been closed with 863 * {@link CameraDevice#close}. 864 * 865 * <p>Any attempt to call methods on this CameraDevice in the 866 * future will throw a {@link IllegalStateException}.</p> 867 * 868 * <p>The default implementation of this method does nothing.</p> 869 * 870 * @param camera the camera device that has become closed 871 */ onClosed(@onNull CameraDevice camera)872 public void onClosed(@NonNull CameraDevice camera) { 873 // Default empty implementation 874 } 875 876 /** 877 * The method called when a camera device is no longer available for 878 * use. 879 * 880 * <p>This callback may be called instead of {@link #onOpened} 881 * if opening the camera fails.</p> 882 * 883 * <p>Any attempt to call methods on this CameraDevice will throw a 884 * {@link CameraAccessException}. The disconnection could be due to a 885 * change in security policy or permissions; the physical disconnection 886 * of a removable camera device; or the camera being needed for a 887 * higher-priority camera API client.</p> 888 * 889 * <p>There may still be capture callbacks that are invoked 890 * after this method is called, or new image buffers that are delivered 891 * to active outputs.</p> 892 * 893 * <p>The default implementation logs a notice to the system log 894 * about the disconnection.</p> 895 * 896 * <p>You should clean up the camera with {@link CameraDevice#close} after 897 * this happens, as it is not recoverable until the camera can be opened 898 * again. For most use cases, this will be when the camera again becomes 899 * {@link CameraManager.AvailabilityCallback#onCameraAvailable available}. 900 * </p> 901 * 902 * @param camera the device that has been disconnected 903 */ onDisconnected(@onNull CameraDevice camera)904 public abstract void onDisconnected(@NonNull CameraDevice camera); // Must implement 905 906 /** 907 * The method called when a camera device has encountered a serious error. 908 * 909 * <p>This callback may be called instead of {@link #onOpened} 910 * if opening the camera fails.</p> 911 * 912 * <p>This indicates a failure of the camera device or camera service in 913 * some way. Any attempt to call methods on this CameraDevice in the 914 * future will throw a {@link CameraAccessException} with the 915 * {@link CameraAccessException#CAMERA_ERROR CAMERA_ERROR} reason. 916 * </p> 917 * 918 * <p>There may still be capture completion or camera stream callbacks 919 * that will be called after this error is received.</p> 920 * 921 * <p>You should clean up the camera with {@link CameraDevice#close} after 922 * this happens. Further attempts at recovery are error-code specific.</p> 923 * 924 * @param camera The device reporting the error 925 * @param error The error code, one of the 926 * {@code StateCallback.ERROR_*} values. 927 * 928 * @see #ERROR_CAMERA_IN_USE 929 * @see #ERROR_MAX_CAMERAS_IN_USE 930 * @see #ERROR_CAMERA_DISABLED 931 * @see #ERROR_CAMERA_DEVICE 932 * @see #ERROR_CAMERA_SERVICE 933 */ onError(@onNull CameraDevice camera, @ErrorCode int error)934 public abstract void onError(@NonNull CameraDevice camera, 935 @ErrorCode int error); // Must implement 936 } 937 938 /** 939 * Temporary for migrating to Callback naming 940 * @hide 941 */ 942 public static abstract class StateListener extends StateCallback { 943 } 944 945 /** 946 * To be inherited by android.hardware.camera2.* code only. 947 * @hide 948 */ CameraDevice()949 public CameraDevice() {} 950 } 951