1@(#) $Header: /tcpdump/master/libpcap/msdos/readme.dos,v 1.3 2004-12-19 19:47:01 guy Exp $ (LBL) 2 3libpcap for DOS 4--------------- 5 6This file contains some notes on building and using libpcap for MS-DOS. 7Look in `README' and `pcap.man' for usage and details. These targets are 8supported: 9 10 - Borland C 4.0+ small or large model. 11 - Metaware HighC 3.1+ with PharLap DOS-extender 12 - GNU C 2.7+ with djgpp 2.01+ DOS extender 13 - Watcom C 11.x with DOS4GW extender 14 15Note: the files in the libpcap.zip contains short trucated filenames. 16 So for djgpp to work with these, disable the use of long file names by 17 setting "LFN=n" in the environment. 18 19Files specific to DOS are pcap-dos.[ch] and the assembly and C files in 20the MSDOS sub-directory. Remember to built lipcap libraries from the top 21install directory. And not from the MSDOS sub-directory. 22 23Note for djgpp users: 24 If you got the libpcap from the official site www.tcpdump, then that 25 distribution does NOT contain any sources for building 32-bit drivers. 26 Instead get the full version at 27 http://www.bgnett.no/~giva/pcap/libpcap.zip 28 29 and set "USE_32BIT_DRIVERS = 1" in msdos\common.dj. 30 31 32 33Requirements 34------------ 35 36DOS-libpcap currently only works reliably with a real-mode Ethernet packet- 37driver. This driver must be installed prior to using any program (e.g. 38tcpdump) compiled with libpcap. Work is underway to implement protected- 39mode drivers for 32-bit targets (djgpp only). The 3Com 3c509 driver is 40working almost perfectly. Due to lack of LAN-cards, I've not had the 41opportunity to test other drivers. These 32-bit drivers are modified 42Linux drivers. 43 44 45Required packages 46----------------- 47 48The following packages and tools must be present for all targets. 49 501. Watt-32 tcp/ip library. This library is *not* used to send or 51 receive network data. It's mostly used to access the 'hosts' 52 file and other <netdb.h> features. Get 'watt32s*.zip' at: 53 54 http://www.bgnett.no/~giva/ 55 562. Exception handler and disassember library (libexc.a) is needed if 57 "USE_EXCEPT = 1" in common.dj. Available at: 58 59 http://www.bgnett.no/~giva/misc/exc_dx07.zip 60 613. Flex & Bison is used to generate parser for the filter handler 62 pcap_compile: 63 64 ftp://ftp.simtel.net/pub/simtelnet/gnu/djgpp/v2gnu/flx254b.zip 65 ftp://ftp.simtel.net/pub/simtelnet/gnu/djgpp/v2gnu/bsn128b.zip 66 674. NASM assembler v 0.98 or later is required when building djgpp and 68 Watcom targets: 69 70 ftp://ftp.simtel.net/pub/simtelnet/gnu/djgpp/v2tk/nasm098p.zip 71 725. sed (Stream Editor) is required for doing `make depend'. 73 It's available at 74 ftp://ftp.simtel.net/pub/simtelnet/gnu/djgpp/v2gnu/sed*.zip 75 76 A touch tool to update the time-stamp of a file. E.g. 77 ftp://ftp.simtel.net/pub/simtelnet/gnu/djgpp/v2gnu/grep*.zip 78 796. For djgpp rm.exe and cp.exe are required. These should already be 80 part of your djgpp installation. Also required (experimental at the 81 time) for djgpp is DLX 2.91 or later. This tool is for the generation 82 of dynamically loadable modules. 83 84 85Compiling libpcap 86----------------- 87 88Follow these steps in building libpcap: 89 901. Make sure you've installed Watt-32 properly (see it's `INSTALL' file). 91 During that installation a environment variable `WATT_ROOT' is set. 92 This variable is used for building libpcap also (`WATT_INC' is 93 deducted from `WATT_ROOT'). djgpp users should also define environment 94 variables `C_INCLUDE_PATH' and `LIBRARY_PATH' to point to the include 95 directory and library directory respectively. E.g. put this in your 96 AUTOEXEC.BAT: 97 set C_INCLUDE_PATH=c:/net/watt/inc 98 set LIBRARY_PATH=c:/net/watt/lib 99 1002. Revise the msdos/common.dj file for your djgpp/gcc installation; 101 - change the value of `GCCLIB' to match location of libgcc.a. 102 - set `USE_32BIT_DRIVERS = 1' to build 32-bit driver objects. 103 104 1053. Build pcap by using appropriate makefile. For djgpp, use: 106 `make -f msdos/makefile.dj' (i.e. GNU `make') 107 108 For a Watcom target say: 109 `wmake -f msdos\makefile.wc' 110 111 For a Borland target say: 112 `maker -f msdos\Makefile pcap_bc.lib' (Borland's `maker.exe') 113 114 And for a HighC/Pharlap target say: 115 `maker -f msdos\Makefile pcap_hc.lib' (Borland's `maker.exe') 116 117 You might like to change some `CFLAGS' -- only `DEBUG' define currently 118 have any effect. It shows a rotating "fan" in upper right corner of 119 screen. Remove `DEBUG' if you don't like it. You could add 120 `-fomit-frame-pointer' to `CFLAGS' to speed up the generated code. 121 But note, this makes debugging and crash-traceback difficult. Only 122 add it if you're fully confident your application is 100% stable. 123 124 Note: Code in `USE_NDIS2' does not work at the moment. 125 1264. The resulting libraries are put in current directory. There's no 127 test-program for `libpcap'. Linking the library with `tcpdump' is 128 the ultimate test anyway. 129 130 131 132Extensions to libpcap 133--------------------- 134 135I've included some extra functions to DOS-libpcap: 136 137 `pcap_config_hook (const char *name, const char *value)' 138 139 Allows an application to set values of internal libpcap variables. 140 `name' is typically a left-side keyword with an associated `value' 141 that is called from application's configure process (see tcpdump's 142 config.c file). libpcap keeps a set of tables that are searched for 143 a name/value match. Currently only used to set debug-levels and 144 parameters for the 32-bit network drivers. 145 146 `pcap_set_wait (pcap_t *, void (*)(void), int)' : 147 148 Only effective when reading offline traffic from dump-files. 149 Function `pcap_offline_read()' will wait (and optionally yield) 150 before printing next packet. This will simulate the pace the packets 151 where actually recorded. 152 153 154 155Happy sniffing ! 156 157 158Gisle Vanem <giva@bgnett.no> 159 <gvanem@broadpark.no> 160 161October 1999, 2004 162 163