Lines Matching refs:upgrade

1199 the field upgrade commands. As a side effect, that TPM may process TPM2_GetTestResult(),
1200 TPM2_GetCapability() or the field upgrade commands before TPM2_Startup().
2180 See 11.2.1 for other command options for a TPM supporting field upgrade mode.
28008 This clause contains the commands for managing field upgrade of the firmware in the TPM. The field
28009 upgrade scheme may be used for replacement or augmentation of the firmware installed in the TPM.
28013 upgrade process. The patch might be a replacement of a portion of the code or a complete
28023 upgrade
28035 upgrade be signed by the PM or the TPM owner and include any other constraints that are desired
28042 Each block of the field upgrade shall contain the digest of the next block of the field upgrade dat…
28046 upgrade data block and as the identifier of the field upgrade sequence.
28047 For each field upgrade data block that is sent to the TPM by TPM2_FieldUpgradeData(), the TPM shall
28051 The system may attempt to abandon the firmware upgrade by using a zero-length buffer in
28053 upgrade started, then the TPM will indicate that it has abandon the update by setting the digest of…
28060 After a _TPM_Init, system software may not be able to resume the field upgrade that was in process
28069 the firmware that was in the TPM when the field upgrade process started (“previous firmware”).
28091 When the last block of the firmware upgrade is loaded into the TPM (indicated to the TPM by data in…
28092 data block in a TPM vendor-specific manner), the TPM will complete the upgrade process. If the TPM …
28106 During the field upgrade process, the TPM shall preserve:
28242 digest of the first block in the field upgrade sequence
28338 This command will take the actual field upgrade image to be installed on the TPM. The exact format …
28394 field upgrade image data
28506 to recover from an abandoned upgrade of this firmware.
28591 field upgrade image data