Lines Matching refs:then

1578 // then umarshal value1, and if that succeeds...
1580 // then return the results of unmarshaling values
1633 the conditional value is allowed. If no “+” is present, then the conditional value is not allowed.
1711 If a parameter is the keyword “null,” then this denotes a selector with no contents. The table in E…
1905 base type had been UINT8, then no checking would occur prior to checking that the value is in the
1934 The selector in Example 2 can then be used in a subset union as shown in Example 3.
2035 indicates the maximum. If the minimum or maximum value expression is omitted, then the range is ope…
2142 array, then the unmarshaled size of that parameter is determined by its data type. The table in Exa…
2228 enclosed in angle brackets (“<>”) as part of the table title. If the angle brackets are empty, then…
2230 contain the letter “I” (such as in “IN” or “in” or “i”), then the structure is input and unmarshali…
2231 generated. If the angle brackets contain the letter “O” (such as in “OUT” or “out” or “o”), then th…
3315 If this column contains a “Y,” then successful completion of the
3318 If the column contains an “O,” then the command may cause a
3334 If the entry is blank, then writing to NV is not allowed in the command
4503 When the format bit (bit 7) is SET, then the error occurred during the unmarshaling or validation o…
4557 words, if P is clear, then a value of 0 to 7 in the N field will indicate a handle error, and a val…
4561 If an implementation is not able to designate the handle, session, or parameter in error, then P an…
4609 If P is SET, then this field is the parameter in error. If P is CLEAR, then this field indicates the
5870 TPM_RC_SUCCESS, then the response tag shall
6063 defined in this table to be, say, TPM_SU_NONE, then TPM_SU_NONE would be a valid input value but
6663 This value is an estimate. If this value is at least 1, then at
6702 This value is an estimate. If this value is at least 1, then at
6717 This value is an estimate. If this value is at least 1, then at
6739 This value is an estimate. If this value is at least 1, then at
6765 This value is an estimate. If this value is at least 1, then at
8038 SET (1): If the object is duplicated, then symmetricAlg shall not be
8157 If fixedTPM is SET in the object's parent, then fixedTPM and fixedParent shall both be
8168 If fixedTPM is SET in the object's parent, then fixedTPM and fixedParent shall both be
8201 If this attribute is SET, then saved contexts of this object will be invalidated on
8202 TPM2_Startup(TPM_SU_CLEAR). If the attribute is CLEAR, then the TPM shall not invalidate the saved
8204 at the next TPM2_Startup(), then the TPM shall continue to be able to use the saved contexts.
8232 of a TPM2_Duplicate(). If this attribute is CLEAR, then this object may be the object of a
8266 If the fixedTPM attribute is SET, then this attribute is authoritative and accurately reflects the …
8267 the sensitive area data. If the fixedTPM attribute is CLEAR, then validation of this attribute requ…
8272 If inSensitive.sensitive.data.size is zero, then this attribute shall be SET in the template;
8323 If this attribute is CLEAR, then then HMAC or password authorizations may not be used for USER role
8333 provide the bind value in TPM2_StartAuthSession(). However, if userWithAuth is CLEAR, then the obje…
8335 actions on the object. If this were allowed, then the userWithAuth control could be circumvented si…
8366 If this attribute is SET, then then HMAC or password authorizations may not be used for ADMIN role
8407 If SET, then authorization failures for the object do not affect the dictionary attack protection l…
8447 If SET, then when the object is duplicated, the sensitive portion of the object is required to be e…
8460 If an object's parent has fixedTPM SET, and the object is duplicable (fixedParent == CLEAR), then
8467 If an object's parent has fixedTPM CLEAR, then the object is required to have the same setting of
8496 shall be CLEAR if fixedTPM is SET. If fixedTPM is CLEAR, then this attribute shall have
8504 shall be CLEAR if fixedTPM is SET. If fixedTPM is CLEAR, then this attribute shall have
8512 if fixedTPM is SET in the object's new parent, then this attribute may be SET or CLEAR,
8569 then the TPM will return an error if the external decrypted blob is not formatted as appropriate fo…
8614 SET, then the key may only be used to sign a digest that was computed by the TPM. A restricted sign…
8617 supplied and has TPM_GENERATED_VALUE as its first octets, then the TPM will not sign a digest of
8619 If restricted is CLEAR, then the key may be used to sign any digest, whether generated by the TPM or
8705 CLEAR (0): If audit is CLEAR, then this field is reserved but the error is
8715 CLEAR (0): If audit is CLEAR, then this field is reserved but the error is
8795 the command, then this attribute will be SET in the response.
8839 If Extended is non-zero, then an extended locality is indicated and the TPMA_LOCALITY contains an
9100 If the RAM memory is shared, then context save of a session may make it possible to load an additio…
9240 attribute. If V is zero, then the commandIndex shall be in the set of commands defined in a version…
9241 specification. If V is one, then the meaning of commandIndex is as determined by the TPM vendor.
9246 If this attribute is SET, then the TPM may perform an NV write as part of the command actions. This…
9248 CLEAR, then the TPM shall not perform an NV write as part of the command actions.
9266 If this attribute is SET, then the TPM may flush many transient objects as a side effect of this co…
9282 If this attribute is SET, then the TPM will flush transient objects as a side effect of this comman…
9316 If this attribute is SET, then the response to this command has a handle area. This area will conta…
9318 response, which is then used to locate the authorizations.
9372 in parentheses. When an interface type is used, the base type is unmarshaled and then checked to se…
9981 algorithm is not implemented on the TPM, then the case for the algorithm is not generated, and use …
10061 If the outside provides the nonce and initial counter, then the caller can
10337 If the TPM2B_ defines a structure and not an array of octets, then the structure is self-describing…
10339 of octets is not equal to the size parameter, then it is an error.
10354 byte of data. The TPM2B_ is then defined as a union that contains a TPM2B (union member ‘b’) and the
10682 …ype of Name in the structure is determined by context and the size parameter. If size is four, then
10683 the Name is a handle. If size is zero, then no Name is present. Otherwise, the size shall be the si…
10718 The bit in pcrSelect [2] corresponding to PCR 19 is bit 3 (19 mod 8). If sizeofSelect is 3, then the
10722 is all zero bits, then no PCR is selected.
10762 TPM implements 32, then a PCR select of 3 octets would imply that PCR 24-31 are not selected.
11575 to create a “message” containing all of the PCR, and then the message is hashed using the contextsp…
12366 TPM_RC_SUCCESS, then the session area of the response contains the same number of authorizations
13836 the type of point were BYTE, then size could have been zero. However, this would complicate the pro…
14702 If the sign attribute of the key is SET, then this shall be a valid
14707 scheme, then this field shall have the same value.
14709 If the decrypt attribute of the key is SET, then this shall be a
14711 If the key is a Storage Key, then this field shall be
14727 TPM_ALG_NULL then this is required to be NULL.
15206 integrity checks and the proper object is loaded in the TPM, then the TPM will return the CV.
15368 If access to an NV Index is to be restricted based on PCR, then an appropriate authPolicy shall be
15374 If TPMA_NV_AUTHREAD is SET, then the Index may be read if the Index authValue is provided. If
15375 TPMA_NV_POLICYREAD is SET, then the Index may be read if the Index authPolicy is satisfied.
15385 If TPMA_NV_AUTHWRITE is SET, then the Index may be written if the Index authValue is provided. If
15386 TPMA_NV_POLICYWRITE is SET, then the Index may be written if the Index authPolicy is satisfied.
15389 If TPMA_NV_WRITELOCKED is SET, then the Index may not be written. If TPMA_NV_WRITEDEFINE is
15391 TPMA_NV_WRITEDEFINE is CLEAR, then TPMA_NV_WRITELOCK will be CLEAR on the next
15393 If TPMA_NV_READLOCKED is SET, then the Index may not be read. TPMA_NV_READLOCK will be
15400 If TPMA_NV_EXTEND is SET, then writes to the Index will cause an update of the Index using the exte…
15568 SET (1): If TPM2_NV_GlobalWriteLock() is successful, then further
15876 was saved (TPM2_ContextSave()), then the TPM shall not load the context.
15886 …of the clearCount if the object has the stClear attribute. If the values are not the same, then the
15893 match the value in the sequence parameter, then TPM shall enter the failure mode because this is
15900 generated the valid context, then there is no reason for the sequence value in the context to be de…
15971 If the handle type for savedHandle is TPM_HT_TRANSIENT, then the low order bits are used to
16069 TPM_RH_ENDORSEMENT, or TPM_RH_NULL), then parentName and parentQualifiedName will be set
16466 If LITTLE_ENDIAN is YES, then the setting of this value has no effect.