Lines Matching refs:when

1402 response code returned when the unmarshaling of this type fails
1414 list of numeric values may be given a name. Then, when used in an interface definition, the name wo…
1629 response code returned when the input value is not one of the
1632 … an interface type is used, a “+” will be appended to the type specification for the parameter when
1708 that are used when referring a specific type. The “Type” column identifies the data type of the mem…
1792 A table may have a type with no selector. This is used when the first part of the structure for all…
2140 semantic applies when the size field determines the number of octets to unmarshal. However, in some
2198 The size of the structure is computed when it is
2250 By default, when a structure is used for input to the TPM, the code generation tool will generate t…
2266 …e cases, additional qualifying characters will follow the underscore. These are generally used when
2321 The value is specified for purposes of dynamic type checking when unmarshaled.
2395 embedded in the table to indicate the error returned when the input value does not match the parame…
2613 This table will require editing when the specification is updated.
4369 The formats defined in this clause only apply when the tag for the response is TPM_ST_NO_SESSIONS.
4374 Figure 2 shows the format for the response codes when bit 7 is zero.
4460 CLEAR when the format is as defined in this Table 12 or when the response code is
4468 SET (1): The error number is defined in this specification and is returned when the response tag
4471 returned when the response tag is TPM_TAG_RSP_COMMAND.
4477 when the response tag is TPM_TAG_RSP_COMMAND value used in TPM 1.2.
4504 input parameter to the TPM. Figure 3 shows the format for the response codes when bit 7 is one.
4953 returned when an internal function cannot process
5795 Response code returned when unmarshaling of this type fails
5814 TPM_TAG_RSP_COMMAND tag from earlier versions of this specification. This value is used when the
5836 tag value for a response; used when there is an error
5838 1.2 when an error occurs. This value is used in this
5915 when the response has no associated sessions.
5938 when the response has authorization sessions.
6096 response code when incorrect value is used
6128 response code when incorrect value is used
6230 should be persistent over power cycles and only changed when indicated by the detailed actions code.
6433 A session is active when it has a context associated with
6870 or returned. The PCR properties can be read when capability == TPM_CAP_PCR_PROPERTIES.
7311 HMAC Authorization Session – assigned by the TPM when the
7327 Policy Authorization Session – assigned by the TPM when the
7349 Transient Objects – assigned by the TPM when an object is loaded
7350 into transient-object memory or when a persistent object is converted
7357 Persistent Objects – assigned by the TPM when a loaded transient
7384 A handle is assigned to a session when the session is started. The handle shall have an MSO equal to
7843 bit would be the bit that is set when the value of the integer is 1.
7939 The state of the attributes is determined when the object is created and they are never changed by …
7941 object in order to allow the TPM to detect modifications of the Protected Object when stored off th…
7995 SET (1): Indicates that, when the object was created with TPM2_Create() or
8098 when an object is created, when it is loaded, and when it is imported. In these descriptions:
8139 For TPM2_LoadExternal() when only the public portion of the object is loaded, the only attribute ch…
8152 This attribute is the logical inverse of the migratable attribute in 1.2. That is, when this attrib…
8203 context if the TPM received TPM2_Shutdown(TPM_SU_STATE). If the saved state is valid when checked
8447 If SET, then when the object is duplicated, the sensitive portion of the object is required to be e…
8687 session and flush any related context when the command completes successfully. In
9041 would leak the existence of an index even when disabled.
9132 slot in RAM when the persistent object is referenced in a command. The TRM
9134 CLEAR (0): indicates that the TPM does not use transient-object slots when
9208 be flushed when this command completes.
9298 The TRM is expected to know the behaviour of TPM2_ContextSave(), and sessions are flushed when
9370 This clause contains definitions for interface types. An interface type is type checked when it is
9557 This interface type is used for an authorization handle when the authorization session uses an HMAC.
9575 This interface type is used for a policy handle when it appears in a policy command.
9615 The TPMI_RH_HIERARCHY interface type is used as the type of a handle in a command when the
9640 response code returned when the unmarshaling of this type fails
9643 The TPMI_RH_ENABLES interface type is used as the type of a handle in a command when the handle
9672 response code returned when the unmarshaling of this type fails
9688 This interface type is used as the type of a handle in a command when the handle is required to be …
9713 response code returned when the unmarshaling of this type fails
9716 The TPMI_RH_PLATFORM interface type is used as the type of a handle in a command when the only
9729 response code returned when the unmarshaling of this type fails
9732 This interface type is used as the type of a handle in a command when the only allowed handle is
9749 response code returned when the unmarshaling of this type fails
9765 This interface type is used as the type of a handle in a command when the only allowed handle is
9782 response code returned when the unmarshaling of this type fails
9785 The TPMI_RH_PROVISION interface type is used as the type of the handle in a command when the only
9805 response code returned when the unmarshaling of this type fails
9808 The TPMI_RH_CLEAR interface type is used as the type of the handle in a command when the only
9827 response code returned when the unmarshaling of this type fails
9866 response code returned when unmarshaling of this type fails
9869 The TPMI_RH_LOCKOUT interface type is used as the type of a handle in a command when the only
9879 response code returned when the unmarshaling of this type fails
10150 response code when a signature scheme is not correct
10172 response code when a key exchange scheme is not correct
10297 In the exemplary code, when a TPMT_HA is allocated, the digest field is large enough to support the
10338 TPM will be able to determine how many octets are in the structure when it is unmarshaled. If that …
10655 when the Name is a digest
10661 when the Name is a handle
10982 error returned when tag is not TPM_ST_CREATION
11060 error returned when tag is not TPM_ST_VERIFIED
11094 This ticket is produced by TPM2_PolicySigned() and TPM2_PolicySecret() when the authorization has an
11119 implementation-specific value indicating when the authorization expires
11146 error returned when tag is
11183 This ticket is produced by TPM2_SequenceComplete() when the message that was digested did not start
11224 error returned when is not TPM_ST_HASHCHECK
11355 response code when count is greater than the
11414 response code when count is greater than the
11420 This structure is used when the TPM returns a list of loaded handles when the capability in
11451 response code when count is greater than the
11491 response code when count is not at least two or is
11526 response code when count is greater than the possible
11566 This list is used to indicate the PCR that are included in a selection when more than one PCR value…
11572 digest of the PCR state when the object was created. The structure is also contained in the attesta…
11595 response code when count is greater
11822 This value is reset to zero when the Storage Primary Seed is
11876 This parameter is set to YES when the value reported in Clock is guaranteed to be unique for the cu…
11877 Owner. It is set to NO when the value of Clock may have been reported in a previous attestation or
11940 This clause describes the structures that are used when a TPM creates a structure to be signed. The
11943 This structure is used when the TPM performs TPM2_GetClock.
12434 error when key size is not supported
12503 when selector may be any of the
12566 when selector may be any of the
12622 when selector may be any of the
12635 those cases when different symmetric algorithms may be selected.
12673 This structure is used when different symmetric block cipher (not XOR) algorithms may be selected.
13705 able to accept a smaller RSA key size in TPM2_LoadExternal() when only the public area is loaded but
13738 error when key size is not supported
13914 error when curve is not supported
14229 Table 173 shows the basic algorithm-agile structure when a symmetric or asymmetric signature is
14254 The structures in this clause are used when a key or secret is being exchanged. The exchange may be…
14415 response code when a public type is not supported
14927 an error (generally TPM_RC_SIZE) when attempting
14948 various entities. A TPM may store the sensitive information in any desired format but when construc…
15131 The integrity computation is used to ensure that a protected object is modified when stored in memo…
15616 and authorization of the Index is not blocked when the TPM is in
15620 allowed when the TPM is in Lockout mode.
15626 SET (1): NV Index state is only required to be saved when the TPM
15677 The TPM will validate that this attribute is SET when the Index is
15679 CLEAR when the Index is defined using ownerAuth.
15754 response code returned when the requested size
15758 This structure is used when a TPMS_NV_PUBLIC is sent on the TPM interface.
15805 TPM when the context was saved, the integrity check of the TPM2B_CONTEXT will fail and the object or
15875 TPMS_CONTEXT structure in TPM2_ContextLoad() are not the same as the values when the context
15878 Saved object contexts are invalidated when the Primary Seed of their hierarchy changes. Objects in …
15879 Endorsement hierarchy are invalidated when either the EPS or SPS is changed.
15958 counter for objects (transient and sequence) is incremented when an object context is saved, and the
15959 sequence counter for sessions increments when a session is created or when it is loaded
15969 For a session, this is the handle that was assigned to the session when it was saved. For a transie…
16057 determine if an object was created when some appropriate protections were present.