Lines Matching +refs:change +refs:log +refs:mode +refs:map
222 * config/m68k-parse.y (yylex): In MRI mode, '@' can start an octal
256 multi-byte nops to avoid changing gcc. The necessary gcc change
404 (ppc_frob_symbol): Don't change C_BLOCK symbols to C_HIDEXT.
604 common mode operation.
691 * cond.c (s_endif): Call demand_empty_rest_of_line. In MRI mode,
695 (s_include): In MRI mode, skip characters after the file name.
699 * config/m68k-parse.y (m68k_reg_parse): In MRI mode, permit
710 Add some support for i960 MRI compatibility mode.
719 TC_I960, in MRI mode permit `sizeof secname' and `startof
733 (s_org): Only punt in MRI mode if TC_M68K.
741 (do_formals): If macro_strip_at, change NARG to $NARG.
749 (macro_expand): If macro_strip_at, change NARG to $NARG.
758 * doc/as.texinfo: Document i960 MRI mode.
857 (md_assemble): For absolute branches, map PC relative relocations
879 little endian mode.
934 (s_mri_if): In MRI mode, stop at the first '*'.
936 (s_mri_else): In MRI mode, ignore trailing characters.
939 * config/m68k-parse.y: Revert yesterday's change.
940 * config/m68k-parse.h: Revert yesterday's change.
976 * config/tc-m68k.c (s_reg): Ignore comment field in MRI mode.
993 it inline. In MRI mode, call current_location for '*'.
1044 (macro_expand): In MRI mode, stop when whitespace is seen in the
1052 * app.c (do_scrub_chars): In MRI mode, keep a space before a
1054 * config/tc-m68k.c (m68k_ip): In MRI mode, ignore anything after
1067 * expr.c (operand): Handle 08 and 09 in MRI mode.
1071 * read.c (s_space): In MRI mode, the expressions stop at the first
1073 (cons_worker): In MRI mode, restore the terminating character at
1081 * app.c (do_scrub_chars): In MRI mode, silently end quoted strings
1082 at newline characters. In MRI mode, always keep spaces in the
1083 operands field. In MRI mode, treat a line comment character as a
1087 * read.c (cons_worker): In MRI mode, the expressions stop at the
1154 * write.c (fixup_segment): Remove change of 29th.
1161 index suppress bit is set (for memory indirect addressing mode).
1287 * read.c (read_a_source_file): In MRI mode, don't end the
1289 (s_space): Don't warn about a zero repeat count in MRI mode.
1290 * config/tc-m68k.c (crack_operand): In MRI mode, don't count
1292 (md_assemble): In MRI mode, anything after the operands field is a
1306 * doc/as.texinfo: Document irp, irpc, macro, and rept. MRI mode
1321 MRI/LABELS_WITHOUT_COLONS handling. In MRI mode, permit label:
1322 equ val. Set line_label when calling colon. In MRI mode, a
1369 * app.c (do_scrub_begin): In MRI mode, set lex of ' to
1383 * read.c (s_include): In MRI mode, don't expect quotes around the
1389 (process_file): In MRI mode, lines beginning with '*' or '!' are
1391 (do_reg): In MRI mode, don't require parentheses.
1392 (do_include): In MRI mode, don't requires quotes. If the file can
1395 (chartype_init): In MRI mode, set FIRSTBIT for '.'.
1396 (main): Set comment_char to ';' when entering MRI mode.
1411 * config/tc-sparc.c (tc_gen_reloc): If PIC, only change PCREL_S2
1475 (do_end): Add parameter. In MRI mode, print it out.
1485 (process_pseudo_op): In MRI mode, print out END pseudo-op. Pass
1514 * gasp.c (change_base): Don't treat ' specially in MRI mode.
1515 (process_file): Don't warn about missing END in MRI mode.
1518 (buffer_and_nest): Treat MRI mode like alternate syntax mode.
1519 (do_aendr): Change error message in MRI mode.
1520 (do_arepeat): Use REPT/ENDR in MRI mode.
1521 (do_formals): In MRI mode, add special NARG formal.
1522 (macro_expand): Various changes for MRI mode: permit a qualifier
1527 (getstring): In MRI mode, allow <> to quote a string.
1532 (process_pseudo_op): Don't require leading '.' in MRI mode.
1535 (process_init): Use add_keyword. In MRI mode, add mrikinfo table.
1577 * doc/as.texinfo: Add documentation for MRI compatibility mode.
1592 mode, call s_mri_sect.
1597 (obj_elf_section): In MRI mode, call s_mri_sect.
1631 (md_begin): In MRI mode, initialize m68k_abspcadd and m68k_rel32.
1632 In MRI mode, change unsized branch aliases to be variable sized.
1646 (s_org): Error if in MRI mode.
1693 (ignore_input): Don't require an initial dot in MRI mode, or if
1759 (read_a_source_file): In MRI mode, set mri_line_label for a label
1784 * config/m68k-parse.y (motorola_operand): For (%pc), set mode to
1809 change type to enum m68k_size. Change all uses.
1847 (expr_begin): Set op_encoding['"'] in MRI mode.
1864 (md_begin): In MRI mode, force flag_reg_prefix_optional to 1.
1877 mode. Do set lex for ';', '*', and '!' in MRI mode.
1879 In MRI mode, keep spaces between labels and colons. Remove MRI
1880 ifndef around LEX_IS_ONECHAR_QUOTE case. In MRI mode, don't use
1886 (read_begin): In MRI mode, set lex_type of '?' to 3.
1890 for MRI mode at runtime rather than compile time. Handle the EQU
1891 pseudo-op in MRI mode. Remove bogus MRI ifdef around done_pseudo.
1892 Change NO_PSEUDO_DOT ifdef to also take effect for MRI mode at
1894 (cons): In MRI mode, always call parse_mri_cons rather than
1902 * expr.c (integer_constant): In MRI mode, if the base was not
1905 (operand): Remove MRI ifdef. In MRI mode, do various things: Pass
1920 * atof-generic.c (atof_generic): In MRI mode, accept underscores
1928 (S_IS_LOCAL): In MRI mode, names beginning with two '?' characters
1978 fields with just n_name; delete field n_value; change n_other from
2500 change.
2620 change.
2626 * config/e-mipself.c (mipself): New emulation mode, doesn't change
2633 (select_emulation_mode): Set emulation_name. Don't change argv.
2778 ALWAYS be at addresses i+2-i+3. In LE mode it is i+0-i+1.
3125 * config/tc-m68k.c (m68k_ip): Fix bug in last change regarding
3261 to be fleshed out later). Note m68k PCINDEX mode has been checked
3278 md_relax_table to prevent relaxation of PCINDEX/BYTE mode to
3279 SHORT, since they don't support that mode.
3282 (md_estimate_size_before_relax): Process PCINDEX/SZ_UNDEF mode.
3376 * config/obj-coff.c: Redo my 10 Jan change, but get it right this
3652 based on the current mode. Ensure that 32-bit addressing will
3729 m620 for PowerPC64 mode.
3794 break out of the loop. Fixes bug in Jan 18 change.
3798 * hash.c (hash_code): Undo last change.
4241 change. The real bug was in bfd/elfcode.h and has been fixed.
4347 * listing.c (file_info): Use text mode when opening file for read.
4479 change; it breaks the rs6000 support, and doesn't seem to be
4501 (comparison): Revert yesterday's change.
4552 (coff_frob_file): New function; map coff_adjust_section_syms over
5066 * ecoff.h : change name to generate_asm_lineno and add function
5068 * ecoff.c : change name to generate_asm_lineno.
5164 * configure.in: Don't change quote characters around AC_MSG_ERROR
5338 * gas/config/tc-hppa.c (pa_comm): Undo last change. Set sy_frag for
5343 * gas/config/tc-hppa.c (pa_comm): Undo last change. Set sy_frag for
5368 zero. Undoes change of June 4, 1993.
5497 * subsegs.c (section_symbol): Had last change backwards.
5630 * config/obj-ecoff.h: change calling interface of
5634 * ecoff.h: change calling interface of
5637 files, also change default built-in type from int to void for
6065 * config/tc-sparc.c (md_section_align): Don't change the size if
6509 PPC_OPERAND_SIGNOPT flag is set and assembling in 32 bit mode.
6594 (s_change_sec): For EMBEDDED_PIC, change .data and .rdata to
7193 * config/obj-som.c (obj_som_init_stab_section): Same change
7637 (md_parse_option): If -EL or -EB is used, change byte_order and
7734 needed, returns pointer, but doesn't change current segment.
7907 * config/obj-som.[ch] (obj_read_begin_hook): Remove last change.
7933 expansion due to rounding mode selectors. Handle R_[RDSN]_MODE
7934 relocations for selecting the current rounding mode.
8084 * config/tc-hppa.c (md_apply_fix_1): Never change fx_addsy to
8358 silently ignore attempt to change the symbol type for a function
8421 a fixup is $global$ change it to NULL as $global$ is really only
9010 that I don't dare change.
9236 (m68k_ip): Generate proper fixup for mode 7.3.
9258 * config/m88k-opcode.h (m88k_opcodes): comment change; o6 field is
9660 change in opcode table.
10320 handling (subsumed by write.c change).
10430 Removed; don't change the symbol value.
10918 * config/tc-h5000.c (build_bytes): Understand @rd mode and build
11056 * configure.in: Warn if BFD mode is explicitly turned off but is
11165 compatibility with BFD_ASSEMBLER mode; rewrite switch statements
11778 (subseg_new) [BFD_ASSEMBLER]: Rewritten to change to new section,
11780 (subseg_set) [BFD_ASSEMBLER]: New function; change to a possibly
11794 compatibility macros declared for non-BFD mode.
11966 * read.c (s_data) [!BFD_ASSEMBLER]: Fix typo in 4 Jan change --
12025 * read.c (s_data): Always use "data_section", since it'll map to
12588 * Makefile.in: map "as" through program_transform_name when
12591 * doc/Makefile.in: map "as" through program_transform_name when
12767 * read.c (potable): Revert sac's incorrect change made Jul 13.
12799 * configure.in: recognize m680x0 as having sun3 emulation mode for
12852 * configure.in: recognize m680x0 as having sun3 emulation mode for
13093 * write.c: comment change only.
13126 mode: change-log