/* * This file was generated automatically by gen-mterp.py for 'arm64'. * * --> DO NOT EDIT <-- */ /* File: arm64/header.S */ /* * Copyright (C) 2016 The Android Open Source Project * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ /* Art assembly interpreter notes: First validate assembly code by implementing ExecuteXXXImpl() style body (doesn't handle invoke, allows higher-level code to create frame & shadow frame. Once that's working, support direct entry code & eliminate shadow frame (and excess locals allocation. Some (hopefully) temporary ugliness. We'll treat xFP as pointing to the base of the vreg array within the shadow frame. Access the other fields, dex_pc_, method_ and number_of_vregs_ via negative offsets. For now, we'll continue the shadow frame mechanism of double-storing object references - via xFP & number_of_vregs_. */ /* ARM64 Runtime register usage conventions. r0 : w0 is 32-bit return register and x0 is 64-bit. r0-r7 : Argument registers. r8-r15 : Caller save registers (used as temporary registers). r16-r17: Also known as ip0-ip1, respectively. Used as scratch registers by the linker, by the trampolines and other stubs (the backend uses these as temporary registers). r18 : Caller save register (used as temporary register). r19 : Pointer to thread-local storage. r20-r29: Callee save registers. r30 : (lr) is reserved (the link register). rsp : (sp) is reserved (the stack pointer). rzr : (zr) is reserved (the zero register). Floating-point registers v0-v31 v0 : s0 is return register for singles (32-bit) and d0 for doubles (64-bit). This is analogous to the C/C++ (hard-float) calling convention. v0-v7 : Floating-point argument registers in both Dalvik and C/C++ conventions. Also used as temporary and codegen scratch registers. v0-v7 and v16-v31 : trashed across C calls. v8-v15 : bottom 64-bits preserved across C calls (d8-d15 are preserved). v16-v31: Used as codegen temp/scratch. v8-v15 : Can be used for promotion. Must maintain 16-byte stack alignment. Mterp notes: The following registers have fixed assignments: reg nick purpose x20 xPC interpreted program counter, used for fetching instructions x21 xFP interpreted frame pointer, used for accessing locals and args x22 xSELF self (Thread) pointer x23 xINST first 16-bit code unit of current instruction x24 xIBASE interpreted instruction base pointer, used for computed goto x25 xREFS base of object references in shadow frame (ideally, we'll get rid of this later). x26 wPROFILE jit profile hotness countdown x16 ip scratch reg x17 ip2 scratch reg (used by macros) Macros are provided for common operations. They MUST NOT alter unspecified registers or condition codes. */ /* * This is a #include, not a %include, because we want the C pre-processor * to expand the macros into assembler assignment statements. */ #include "asm_support.h" #define MTERP_PROFILE_BRANCHES 1 #define MTERP_LOGGING 0 /* During bringup, we'll use the shadow frame model instead of xFP */ /* single-purpose registers, given names for clarity */ #define xPC x20 #define xFP x21 #define xSELF x22 #define xINST x23 #define wINST w23 #define xIBASE x24 #define xREFS x25 #define wPROFILE w26 #define xPROFILE x26 #define ip x16 #define ip2 x17 /* * Instead of holding a pointer to the shadow frame, we keep xFP at the base of the vregs. So, * to access other shadow frame fields, we need to use a backwards offset. Define those here. */ #define OFF_FP(a) (a - SHADOWFRAME_VREGS_OFFSET) #define OFF_FP_NUMBER_OF_VREGS OFF_FP(SHADOWFRAME_NUMBER_OF_VREGS_OFFSET) #define OFF_FP_DEX_PC OFF_FP(SHADOWFRAME_DEX_PC_OFFSET) #define OFF_FP_LINK OFF_FP(SHADOWFRAME_LINK_OFFSET) #define OFF_FP_METHOD OFF_FP(SHADOWFRAME_METHOD_OFFSET) #define OFF_FP_RESULT_REGISTER OFF_FP(SHADOWFRAME_RESULT_REGISTER_OFFSET) #define OFF_FP_DEX_PC_PTR OFF_FP(SHADOWFRAME_DEX_PC_PTR_OFFSET) #define OFF_FP_CODE_ITEM OFF_FP(SHADOWFRAME_CODE_ITEM_OFFSET) #define OFF_FP_SHADOWFRAME OFF_FP(0) /* * "export" the PC to dex_pc field in the shadow frame, f/b/o future exception objects. Must * be done *before* something throws. * * It's okay to do this more than once. * * NOTE: the fast interpreter keeps track of dex pc as a direct pointer to the mapped * dex byte codes. However, the rest of the runtime expects dex pc to be an instruction * offset into the code_items_[] array. For effiency, we will "export" the * current dex pc as a direct pointer using the EXPORT_PC macro, and rely on GetDexPC * to convert to a dex pc when needed. */ .macro EXPORT_PC str xPC, [xFP, #OFF_FP_DEX_PC_PTR] .endm /* * Fetch the next instruction from xPC into wINST. Does not advance xPC. */ .macro FETCH_INST ldrh wINST, [xPC] .endm /* * Fetch the next instruction from the specified offset. Advances xPC * to point to the next instruction. "_count" is in 16-bit code units. * * Because of the limited size of immediate constants on ARM, this is only * suitable for small forward movements (i.e. don't try to implement "goto" * with this). * * This must come AFTER anything that can throw an exception, or the * exception catch may miss. (This also implies that it must come after * EXPORT_PC.) */ .macro FETCH_ADVANCE_INST count ldrh wINST, [xPC, #((\count)*2)]! .endm /* * The operation performed here is similar to FETCH_ADVANCE_INST, except the * src and dest registers are parameterized (not hard-wired to xPC and xINST). */ .macro PREFETCH_ADVANCE_INST dreg, sreg, count ldrh \dreg, [\sreg, #((\count)*2)]! .endm /* * Similar to FETCH_ADVANCE_INST, but does not update xPC. Used to load * xINST ahead of possible exception point. Be sure to manually advance xPC * later. */ .macro PREFETCH_INST count ldrh wINST, [xPC, #((\count)*2)] .endm /* Advance xPC by some number of code units. */ .macro ADVANCE count add xPC, xPC, #((\count)*2) .endm /* * Fetch the next instruction from an offset specified by _reg and advance xPC. * xPC to point to the next instruction. "_reg" must specify the distance * in bytes, *not* 16-bit code units, and may be a signed value. Must not set flags. * */ .macro FETCH_ADVANCE_INST_RB reg add xPC, xPC, \reg, sxtw ldrh wINST, [xPC] .endm /* * Fetch a half-word code unit from an offset past the current PC. The * "_count" value is in 16-bit code units. Does not advance xPC. * * The "_S" variant works the same but treats the value as signed. */ .macro FETCH reg, count ldrh \reg, [xPC, #((\count)*2)] .endm .macro FETCH_S reg, count ldrsh \reg, [xPC, #((\count)*2)] .endm /* * Fetch one byte from an offset past the current PC. Pass in the same * "_count" as you would for FETCH, and an additional 0/1 indicating which * byte of the halfword you want (lo/hi). */ .macro FETCH_B reg, count, byte ldrb \reg, [xPC, #((\count)*2+(\byte))] .endm /* * Put the instruction's opcode field into the specified register. */ .macro GET_INST_OPCODE reg and \reg, xINST, #255 .endm /* * Put the prefetched instruction's opcode field into the specified register. */ .macro GET_PREFETCHED_OPCODE oreg, ireg and \oreg, \ireg, #255 .endm /* * Begin executing the opcode in _reg. Clobbers reg */ .macro GOTO_OPCODE reg add \reg, xIBASE, \reg, lsl #7 br \reg .endm .macro GOTO_OPCODE_BASE base,reg add \reg, \base, \reg, lsl #7 br \reg .endm /* * Get/set the 32-bit value from a Dalvik register. */ .macro GET_VREG reg, vreg ldr \reg, [xFP, \vreg, uxtw #2] .endm .macro SET_VREG reg, vreg str \reg, [xFP, \vreg, uxtw #2] str wzr, [xREFS, \vreg, uxtw #2] .endm .macro SET_VREG_OBJECT reg, vreg, tmpreg str \reg, [xFP, \vreg, uxtw #2] str \reg, [xREFS, \vreg, uxtw #2] .endm /* * Get/set the 64-bit value from a Dalvik register. * TUNING: can we do better here? */ .macro GET_VREG_WIDE reg, vreg add ip2, xFP, \vreg, lsl #2 ldr \reg, [ip2] .endm .macro SET_VREG_WIDE reg, vreg add ip2, xFP, \vreg, lsl #2 str \reg, [ip2] add ip2, xREFS, \vreg, lsl #2 str xzr, [ip2] .endm /* * Convert a virtual register index into an address. */ .macro VREG_INDEX_TO_ADDR reg, vreg add \reg, xFP, \vreg, lsl #2 /* WARNING: handle shadow frame vreg zero if store */ .endm /* * Refresh handler table. */ .macro REFRESH_IBASE ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] .endm /* File: arm64/entry.S */ /* * Copyright (C) 2016 The Android Open Source Project * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ .text /* * Interpreter entry point. * On entry: * x0 Thread* self/ * x1 code_item * x2 ShadowFrame * x3 JValue* result_register * */ .global ExecuteMterpImpl .type ExecuteMterpImpl, %function .balign 16 ExecuteMterpImpl: .cfi_startproc stp xPROFILE, x27, [sp, #-80]! stp xIBASE, xREFS, [sp, #16] stp xSELF, xINST, [sp, #32] stp xPC, xFP, [sp, #48] stp fp, lr, [sp, #64] add fp, sp, #64 /* Remember the return register */ str x3, [x2, #SHADOWFRAME_RESULT_REGISTER_OFFSET] /* Remember the code_item */ str x1, [x2, #SHADOWFRAME_CODE_ITEM_OFFSET] /* set up "named" registers */ mov xSELF, x0 ldr w0, [x2, #SHADOWFRAME_NUMBER_OF_VREGS_OFFSET] add xFP, x2, #SHADOWFRAME_VREGS_OFFSET // point to vregs. add xREFS, xFP, w0, lsl #2 // point to reference array in shadow frame ldr w0, [x2, #SHADOWFRAME_DEX_PC_OFFSET] // Get starting dex_pc. add xPC, x1, #CODEITEM_INSNS_OFFSET // Point to base of insns[] add xPC, xPC, w0, lsl #1 // Create direct pointer to 1st dex opcode EXPORT_PC /* Starting ibase */ ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] /* Set up for backwards branches & osr profiling */ ldr x0, [xFP, #OFF_FP_METHOD] add x1, xFP, #OFF_FP_SHADOWFRAME bl MterpSetUpHotnessCountdown mov wPROFILE, w0 // Starting hotness countdown to xPROFILE /* start executing the instruction at rPC */ FETCH_INST // load wINST from rPC GET_INST_OPCODE ip // extract opcode from wINST GOTO_OPCODE ip // jump to next instruction /* NOTE: no fallthrough */ .global artMterpAsmInstructionStart .type artMterpAsmInstructionStart, %function artMterpAsmInstructionStart = .L_op_nop .text /* ------------------------------ */ .balign 128 .L_op_nop: /* 0x00 */ /* File: arm64/op_nop.S */ FETCH_ADVANCE_INST 1 // advance to next instr, load rINST GET_INST_OPCODE ip // ip<- opcode from rINST GOTO_OPCODE ip // execute it /* ------------------------------ */ .balign 128 .L_op_move: /* 0x01 */ /* File: arm64/op_move.S */ /* for move, move-object, long-to-int */ /* op vA, vB */ lsr w1, wINST, #12 // x1<- B from 15:12 ubfx w0, wINST, #8, #4 // x0<- A from 11:8 FETCH_ADVANCE_INST 1 // advance rPC, load wINST GET_VREG w2, w1 // x2<- fp[B] GET_INST_OPCODE ip // ip<- opcode from wINST .if 0 SET_VREG_OBJECT w2, w0 // fp[A]<- x2 .else SET_VREG w2, w0 // fp[A]<- x2 .endif GOTO_OPCODE ip // execute next instruction /* ------------------------------ */ .balign 128 .L_op_move_from16: /* 0x02 */ /* File: arm64/op_move_from16.S */ /* for: move/from16, move-object/from16 */ /* op vAA, vBBBB */ FETCH w1, 1 // r1<- BBBB lsr w0, wINST, #8 // r0<- AA FETCH_ADVANCE_INST 2 // advance rPC, load wINST GET_VREG w2, w1 // r2<- fp[BBBB] GET_INST_OPCODE ip // extract opcode from wINST .if 0 SET_VREG_OBJECT w2, w0 // fp[AA]<- r2 .else SET_VREG w2, w0 // fp[AA]<- r2 .endif GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_move_16: /* 0x03 */ /* File: arm64/op_move_16.S */ /* for: move/16, move-object/16 */ /* op vAAAA, vBBBB */ FETCH w1, 2 // w1<- BBBB FETCH w0, 1 // w0<- AAAA FETCH_ADVANCE_INST 3 // advance xPC, load xINST GET_VREG w2, w1 // w2<- fp[BBBB] GET_INST_OPCODE ip // extract opcode from xINST .if 0 SET_VREG_OBJECT w2, w0 // fp[AAAA]<- w2 .else SET_VREG w2, w0 // fp[AAAA]<- w2 .endif GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_move_wide: /* 0x04 */ /* File: arm64/op_move_wide.S */ /* move-wide vA, vB */ /* NOTE: regs can overlap, e.g. "move v6,v7" or "move v7,v6" */ lsr w3, wINST, #12 // w3<- B ubfx w2, wINST, #8, #4 // w2<- A GET_VREG_WIDE x3, w3 FETCH_ADVANCE_INST 1 // advance rPC, load wINST GET_INST_OPCODE ip // extract opcode from wINST SET_VREG_WIDE x3, w2 GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_move_wide_from16: /* 0x05 */ /* File: arm64/op_move_wide_from16.S */ /* move-wide/from16 vAA, vBBBB */ /* NOTE: regs can overlap, e.g. "move v6,v7" or "move v7,v6" */ FETCH w3, 1 // w3<- BBBB lsr w2, wINST, #8 // w2<- AA GET_VREG_WIDE x3, w3 FETCH_ADVANCE_INST 2 // advance rPC, load wINST GET_INST_OPCODE ip // extract opcode from wINST SET_VREG_WIDE x3, w2 GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_move_wide_16: /* 0x06 */ /* File: arm64/op_move_wide_16.S */ /* move-wide/16 vAAAA, vBBBB */ /* NOTE: regs can overlap, e.g. "move v6,v7" or "move v7,v6" */ FETCH w3, 2 // w3<- BBBB FETCH w2, 1 // w2<- AAAA GET_VREG_WIDE x3, w3 FETCH_ADVANCE_INST 3 // advance rPC, load rINST SET_VREG_WIDE x3, w2 GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_move_object: /* 0x07 */ /* File: arm64/op_move_object.S */ /* File: arm64/op_move.S */ /* for move, move-object, long-to-int */ /* op vA, vB */ lsr w1, wINST, #12 // x1<- B from 15:12 ubfx w0, wINST, #8, #4 // x0<- A from 11:8 FETCH_ADVANCE_INST 1 // advance rPC, load wINST GET_VREG w2, w1 // x2<- fp[B] GET_INST_OPCODE ip // ip<- opcode from wINST .if 1 SET_VREG_OBJECT w2, w0 // fp[A]<- x2 .else SET_VREG w2, w0 // fp[A]<- x2 .endif GOTO_OPCODE ip // execute next instruction /* ------------------------------ */ .balign 128 .L_op_move_object_from16: /* 0x08 */ /* File: arm64/op_move_object_from16.S */ /* File: arm64/op_move_from16.S */ /* for: move/from16, move-object/from16 */ /* op vAA, vBBBB */ FETCH w1, 1 // r1<- BBBB lsr w0, wINST, #8 // r0<- AA FETCH_ADVANCE_INST 2 // advance rPC, load wINST GET_VREG w2, w1 // r2<- fp[BBBB] GET_INST_OPCODE ip // extract opcode from wINST .if 1 SET_VREG_OBJECT w2, w0 // fp[AA]<- r2 .else SET_VREG w2, w0 // fp[AA]<- r2 .endif GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_move_object_16: /* 0x09 */ /* File: arm64/op_move_object_16.S */ /* File: arm64/op_move_16.S */ /* for: move/16, move-object/16 */ /* op vAAAA, vBBBB */ FETCH w1, 2 // w1<- BBBB FETCH w0, 1 // w0<- AAAA FETCH_ADVANCE_INST 3 // advance xPC, load xINST GET_VREG w2, w1 // w2<- fp[BBBB] GET_INST_OPCODE ip // extract opcode from xINST .if 1 SET_VREG_OBJECT w2, w0 // fp[AAAA]<- w2 .else SET_VREG w2, w0 // fp[AAAA]<- w2 .endif GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_move_result: /* 0x0a */ /* File: arm64/op_move_result.S */ /* for: move-result, move-result-object */ /* op vAA */ lsr w2, wINST, #8 // r2<- AA FETCH_ADVANCE_INST 1 // advance rPC, load wINST ldr x0, [xFP, #OFF_FP_RESULT_REGISTER] // get pointer to result JType. ldr w0, [x0] // r0 <- result.i. GET_INST_OPCODE ip // extract opcode from wINST .if 0 SET_VREG_OBJECT w0, w2, w1 // fp[AA]<- r0 .else SET_VREG w0, w2 // fp[AA]<- r0 .endif GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_move_result_wide: /* 0x0b */ /* File: arm64/op_move_result_wide.S */ /* for: move-result-wide */ /* op vAA */ lsr w2, wINST, #8 // r2<- AA FETCH_ADVANCE_INST 1 // advance rPC, load wINST ldr x0, [xFP, #OFF_FP_RESULT_REGISTER] // get pointer to result JType. ldr x0, [x0] // r0 <- result.i. GET_INST_OPCODE ip // extract opcode from wINST SET_VREG_WIDE x0, x2 // fp[AA]<- r0 GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_move_result_object: /* 0x0c */ /* File: arm64/op_move_result_object.S */ /* File: arm64/op_move_result.S */ /* for: move-result, move-result-object */ /* op vAA */ lsr w2, wINST, #8 // r2<- AA FETCH_ADVANCE_INST 1 // advance rPC, load wINST ldr x0, [xFP, #OFF_FP_RESULT_REGISTER] // get pointer to result JType. ldr w0, [x0] // r0 <- result.i. GET_INST_OPCODE ip // extract opcode from wINST .if 1 SET_VREG_OBJECT w0, w2, w1 // fp[AA]<- r0 .else SET_VREG w0, w2 // fp[AA]<- r0 .endif GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_move_exception: /* 0x0d */ /* File: arm64/op_move_exception.S */ /* move-exception vAA */ lsr w2, wINST, #8 // w2<- AA ldr x3, [xSELF, #THREAD_EXCEPTION_OFFSET] mov x1, #0 // w1<- 0 FETCH_ADVANCE_INST 1 // advance rPC, load rINST SET_VREG_OBJECT w3, w2 // fp[AA]<- exception obj GET_INST_OPCODE ip // extract opcode from rINST str x1, [xSELF, #THREAD_EXCEPTION_OFFSET] // clear exception GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_return_void: /* 0x0e */ /* File: arm64/op_return_void.S */ .extern MterpThreadFenceForConstructor bl MterpThreadFenceForConstructor ldr w7, [xSELF, #THREAD_FLAGS_OFFSET] mov x0, xSELF ands w7, w7, #(THREAD_SUSPEND_REQUEST | THREAD_CHECKPOINT_REQUEST) b.ne .Lop_return_void_check .Lop_return_void_return: mov x0, #0 b MterpReturn .Lop_return_void_check: bl MterpSuspendCheck // (self) b .Lop_return_void_return /* ------------------------------ */ .balign 128 .L_op_return: /* 0x0f */ /* File: arm64/op_return.S */ /* * Return a 32-bit value. * * for: return, return-object */ /* op vAA */ .extern MterpThreadFenceForConstructor bl MterpThreadFenceForConstructor ldr w7, [xSELF, #THREAD_FLAGS_OFFSET] mov x0, xSELF ands w7, w7, #(THREAD_SUSPEND_REQUEST | THREAD_CHECKPOINT_REQUEST) b.ne .Lop_return_check .Lop_return_return: lsr w2, wINST, #8 // r2<- AA GET_VREG w0, w2 // r0<- vAA b MterpReturn .Lop_return_check: bl MterpSuspendCheck // (self) b .Lop_return_return /* ------------------------------ */ .balign 128 .L_op_return_wide: /* 0x10 */ /* File: arm64/op_return_wide.S */ /* * Return a 64-bit value. */ /* return-wide vAA */ /* op vAA */ .extern MterpThreadFenceForConstructor bl MterpThreadFenceForConstructor ldr w7, [xSELF, #THREAD_FLAGS_OFFSET] mov x0, xSELF ands w7, w7, #(THREAD_SUSPEND_REQUEST | THREAD_CHECKPOINT_REQUEST) b.ne .Lop_return_wide_check .Lop_return_wide_return: lsr w2, wINST, #8 // w2<- AA GET_VREG_WIDE x0, w2 // x0<- vAA b MterpReturn .Lop_return_wide_check: bl MterpSuspendCheck // (self) b .Lop_return_wide_return /* ------------------------------ */ .balign 128 .L_op_return_object: /* 0x11 */ /* File: arm64/op_return_object.S */ /* File: arm64/op_return.S */ /* * Return a 32-bit value. * * for: return, return-object */ /* op vAA */ .extern MterpThreadFenceForConstructor bl MterpThreadFenceForConstructor ldr w7, [xSELF, #THREAD_FLAGS_OFFSET] mov x0, xSELF ands w7, w7, #(THREAD_SUSPEND_REQUEST | THREAD_CHECKPOINT_REQUEST) b.ne .Lop_return_object_check .Lop_return_object_return: lsr w2, wINST, #8 // r2<- AA GET_VREG w0, w2 // r0<- vAA b MterpReturn .Lop_return_object_check: bl MterpSuspendCheck // (self) b .Lop_return_object_return /* ------------------------------ */ .balign 128 .L_op_const_4: /* 0x12 */ /* File: arm64/op_const_4.S */ /* const/4 vA, #+B */ lsl w1, wINST, #16 // w1<- Bxxx0000 ubfx w0, wINST, #8, #4 // w0<- A FETCH_ADVANCE_INST 1 // advance xPC, load wINST asr w1, w1, #28 // w1<- sssssssB (sign-extended) GET_INST_OPCODE ip // ip<- opcode from xINST SET_VREG w1, w0 // fp[A]<- w1 GOTO_OPCODE ip // execute next instruction /* ------------------------------ */ .balign 128 .L_op_const_16: /* 0x13 */ /* File: arm64/op_const_16.S */ /* const/16 vAA, #+BBBB */ FETCH_S w0, 1 // w0<- ssssBBBB (sign-extended lsr w3, wINST, #8 // w3<- AA FETCH_ADVANCE_INST 2 // advance xPC, load wINST SET_VREG w0, w3 // vAA<- w0 GET_INST_OPCODE ip // extract opcode from wINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_const: /* 0x14 */ /* File: arm64/op_const.S */ /* const vAA, #+BBBBbbbb */ lsr w3, wINST, #8 // w3<- AA FETCH w0, 1 // w0<- bbbb (low FETCH w1, 2 // w1<- BBBB (high FETCH_ADVANCE_INST 3 // advance rPC, load wINST orr w0, w0, w1, lsl #16 // w0<- BBBBbbbb GET_INST_OPCODE ip // extract opcode from wINST SET_VREG w0, w3 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_const_high16: /* 0x15 */ /* File: arm64/op_const_high16.S */ /* const/high16 vAA, #+BBBB0000 */ FETCH w0, 1 // r0<- 0000BBBB (zero-extended lsr w3, wINST, #8 // r3<- AA lsl w0, w0, #16 // r0<- BBBB0000 FETCH_ADVANCE_INST 2 // advance rPC, load rINST SET_VREG w0, w3 // vAA<- r0 GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_const_wide_16: /* 0x16 */ /* File: arm64/op_const_wide_16.S */ /* const-wide/16 vAA, #+BBBB */ FETCH_S w0, 1 // w0<- ssssBBBB (sign-extended lsr w3, wINST, #8 // w3<- AA FETCH_ADVANCE_INST 2 // advance rPC, load rINST sbfm x0, x0, 0, 31 GET_INST_OPCODE ip // extract opcode from rINST SET_VREG_WIDE x0, w3 GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_const_wide_32: /* 0x17 */ /* File: arm64/op_const_wide_32.S */ /* const-wide/32 vAA, #+BBBBbbbb */ FETCH w0, 1 // w0<- 0000bbbb (low) lsr w3, wINST, #8 // w3<- AA FETCH_S w2, 2 // w2<- ssssBBBB (high) FETCH_ADVANCE_INST 3 // advance rPC, load wINST GET_INST_OPCODE ip // extract opcode from wINST orr w0, w0, w2, lsl #16 // w0<- BBBBbbbb sbfm x0, x0, 0, 31 SET_VREG_WIDE x0, w3 GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_const_wide: /* 0x18 */ /* File: arm64/op_const_wide.S */ /* const-wide vAA, #+HHHHhhhhBBBBbbbb */ FETCH w0, 1 // w0<- bbbb (low) FETCH w1, 2 // w1<- BBBB (low middle) FETCH w2, 3 // w2<- hhhh (high middle) FETCH w3, 4 // w3<- HHHH (high) lsr w4, wINST, #8 // r4<- AA FETCH_ADVANCE_INST 5 // advance rPC, load wINST GET_INST_OPCODE ip // extract opcode from wINST orr w0, w0, w1, lsl #16 // w0<- BBBBbbbb orr x0, x0, x2, lsl #32 // w0<- hhhhBBBBbbbb orr x0, x0, x3, lsl #48 // w0<- HHHHhhhhBBBBbbbb SET_VREG_WIDE x0, w4 GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_const_wide_high16: /* 0x19 */ /* File: arm64/op_const_wide_high16.S */ /* const-wide/high16 vAA, #+BBBB000000000000 */ FETCH w0, 1 // w0<- 0000BBBB (zero-extended) lsr w1, wINST, #8 // w1<- AA FETCH_ADVANCE_INST 2 // advance rPC, load wINST lsl x0, x0, #48 SET_VREG_WIDE x0, w1 GET_INST_OPCODE ip // extract opcode from wINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_const_string: /* 0x1a */ /* File: arm64/op_const_string.S */ /* const/string vAA, String//BBBB */ EXPORT_PC FETCH w0, 1 // w0<- BBBB lsr w1, wINST, #8 // w1<- AA add x2, xFP, #OFF_FP_SHADOWFRAME mov x3, xSELF bl MterpConstString // (index, tgt_reg, shadow_frame, self) PREFETCH_INST 2 // load rINST cbnz w0, MterpPossibleException // let reference interpreter deal with it. ADVANCE 2 // advance rPC GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_const_string_jumbo: /* 0x1b */ /* File: arm64/op_const_string_jumbo.S */ /* const/string vAA, String//BBBBBBBB */ EXPORT_PC FETCH w0, 1 // w0<- bbbb (low FETCH w2, 2 // w2<- BBBB (high lsr w1, wINST, #8 // w1<- AA orr w0, w0, w2, lsl #16 // w1<- BBBBbbbb add x2, xFP, #OFF_FP_SHADOWFRAME mov x3, xSELF bl MterpConstString // (index, tgt_reg, shadow_frame, self) PREFETCH_INST 3 // advance rPC cbnz w0, MterpPossibleException // let reference interpreter deal with it. ADVANCE 3 // advance rPC GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_const_class: /* 0x1c */ /* File: arm64/op_const_class.S */ /* const/class vAA, Class//BBBB */ EXPORT_PC FETCH w0, 1 // w0<- BBBB lsr w1, wINST, #8 // w1<- AA add x2, xFP, #OFF_FP_SHADOWFRAME mov x3, xSELF bl MterpConstClass // (index, tgt_reg, shadow_frame, self) PREFETCH_INST 2 cbnz w0, MterpPossibleException ADVANCE 2 GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_monitor_enter: /* 0x1d */ /* File: arm64/op_monitor_enter.S */ /* * Synchronize on an object. */ /* monitor-enter vAA */ EXPORT_PC lsr w2, wINST, #8 // w2<- AA GET_VREG w0, w2 // w0<- vAA (object) mov x1, xSELF // w1<- self bl artLockObjectFromCode cbnz w0, MterpException FETCH_ADVANCE_INST 1 GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_monitor_exit: /* 0x1e */ /* File: arm64/op_monitor_exit.S */ /* * Unlock an object. * * Exceptions that occur when unlocking a monitor need to appear as * if they happened at the following instruction. See the Dalvik * instruction spec. */ /* monitor-exit vAA */ EXPORT_PC lsr w2, wINST, #8 // w2<- AA GET_VREG w0, w2 // w0<- vAA (object) mov x1, xSELF // w0<- self bl artUnlockObjectFromCode // w0<- success for unlock(self, obj) cbnz w0, MterpException FETCH_ADVANCE_INST 1 // before throw: advance rPC, load rINST GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_check_cast: /* 0x1f */ /* File: arm64/op_check_cast.S */ /* * Check to see if a cast from one class to another is allowed. */ /* check-cast vAA, class//BBBB */ EXPORT_PC FETCH w0, 1 // w0<- BBBB lsr w1, wINST, #8 // w1<- AA VREG_INDEX_TO_ADDR x1, w1 // w1<- &object ldr x2, [xFP, #OFF_FP_METHOD] // w2<- method mov x3, xSELF // w3<- self bl MterpCheckCast // (index, &obj, method, self) PREFETCH_INST 2 cbnz w0, MterpPossibleException ADVANCE 2 GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_instance_of: /* 0x20 */ /* File: arm64/op_instance_of.S */ /* * Check to see if an object reference is an instance of a class. * * Most common situation is a non-null object, being compared against * an already-resolved class. */ /* instance-of vA, vB, class//CCCC */ EXPORT_PC FETCH w0, 1 // w0<- CCCC lsr w1, wINST, #12 // w1<- B VREG_INDEX_TO_ADDR x1, w1 // w1<- &object ldr x2, [xFP, #OFF_FP_METHOD] // w2<- method mov x3, xSELF // w3<- self bl MterpInstanceOf // (index, &obj, method, self) ldr x1, [xSELF, #THREAD_EXCEPTION_OFFSET] lsr w2, wINST, #8 // w2<- A+ and w2, w2, #15 // w2<- A PREFETCH_INST 2 cbnz x1, MterpException ADVANCE 2 // advance rPC SET_VREG w0, w2 // vA<- w0 GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_array_length: /* 0x21 */ /* File: arm64/op_array_length.S */ /* * Return the length of an array. */ lsr w1, wINST, #12 // w1<- B ubfx w2, wINST, #8, #4 // w2<- A GET_VREG w0, w1 // w0<- vB (object ref) cbz w0, common_errNullObject // yup, fail FETCH_ADVANCE_INST 1 // advance rPC, load rINST ldr w3, [x0, #MIRROR_ARRAY_LENGTH_OFFSET] // w3<- array length GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w3, w2 // vB<- length GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_new_instance: /* 0x22 */ /* File: arm64/op_new_instance.S */ /* * Create a new instance of a class. */ /* new-instance vAA, class//BBBB */ EXPORT_PC add x0, xFP, #OFF_FP_SHADOWFRAME mov x1, xSELF mov w2, wINST bl MterpNewInstance // (shadow_frame, self, inst_data) cbz w0, MterpPossibleException FETCH_ADVANCE_INST 2 // advance rPC, load rINST GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_new_array: /* 0x23 */ /* File: arm64/op_new_array.S */ /* * Allocate an array of objects, specified with the array class * and a count. * * The verifier guarantees that this is an array class, so we don't * check for it here. */ /* new-array vA, vB, class//CCCC */ EXPORT_PC add x0, xFP, #OFF_FP_SHADOWFRAME mov x1, xPC mov w2, wINST mov x3, xSELF bl MterpNewArray cbz w0, MterpPossibleException FETCH_ADVANCE_INST 2 // advance rPC, load rINST GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_filled_new_array: /* 0x24 */ /* File: arm64/op_filled_new_array.S */ /* * Create a new array with elements filled from registers. * * for: filled-new-array, filled-new-array/range */ /* op vB, {vD, vE, vF, vG, vA}, class//CCCC */ /* op {vCCCC..v(CCCC+AA-1)}, type//BBBB */ .extern MterpFilledNewArray EXPORT_PC add x0, xFP, #OFF_FP_SHADOWFRAME mov x1, xPC mov x2, xSELF bl MterpFilledNewArray cbz w0, MterpPossibleException FETCH_ADVANCE_INST 3 // advance rPC, load rINST GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_filled_new_array_range: /* 0x25 */ /* File: arm64/op_filled_new_array_range.S */ /* File: arm64/op_filled_new_array.S */ /* * Create a new array with elements filled from registers. * * for: filled-new-array, filled-new-array/range */ /* op vB, {vD, vE, vF, vG, vA}, class//CCCC */ /* op {vCCCC..v(CCCC+AA-1)}, type//BBBB */ .extern MterpFilledNewArrayRange EXPORT_PC add x0, xFP, #OFF_FP_SHADOWFRAME mov x1, xPC mov x2, xSELF bl MterpFilledNewArrayRange cbz w0, MterpPossibleException FETCH_ADVANCE_INST 3 // advance rPC, load rINST GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_fill_array_data: /* 0x26 */ /* File: arm64/op_fill_array_data.S */ /* fill-array-data vAA, +BBBBBBBB */ EXPORT_PC FETCH w0, 1 // w0<- bbbb (lo) FETCH w1, 2 // w1<- BBBB (hi) lsr w3, wINST, #8 // w3<- AA orr w1, w0, w1, lsl #16 // w1<- BBBBbbbb GET_VREG w0, w3 // w0<- vAA (array object) add x1, xPC, w1, lsl #1 // w1<- PC + BBBBbbbb*2 (array data off.) bl MterpFillArrayData // (obj, payload) cbz w0, MterpPossibleException // exception? FETCH_ADVANCE_INST 3 // advance rPC, load rINST GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_throw: /* 0x27 */ /* File: arm64/op_throw.S */ /* * Throw an exception object in the current thread. */ /* throw vAA */ EXPORT_PC lsr w2, wINST, #8 // r2<- AA GET_VREG w1, w2 // r1<- vAA (exception object) cbz w1, common_errNullObject str x1, [xSELF, #THREAD_EXCEPTION_OFFSET] // thread->exception<- obj b MterpException /* ------------------------------ */ .balign 128 .L_op_goto: /* 0x28 */ /* File: arm64/op_goto.S */ /* * Unconditional branch, 8-bit offset. * * The branch distance is a signed code-unit offset, which we need to * double to get a byte offset. */ /* goto +AA */ sbfx wINST, wINST, #8, #8 // wINST<- ssssssAA (sign-extended) b MterpCommonTakenBranchNoFlags /* ------------------------------ */ .balign 128 .L_op_goto_16: /* 0x29 */ /* File: arm64/op_goto_16.S */ /* * Unconditional branch, 16-bit offset. * * The branch distance is a signed code-unit offset, which we need to * double to get a byte offset. */ /* goto/16 +AAAA */ FETCH_S wINST, 1 // wINST<- ssssAAAA (sign-extended) b MterpCommonTakenBranchNoFlags /* ------------------------------ */ .balign 128 .L_op_goto_32: /* 0x2a */ /* File: arm64/op_goto_32.S */ /* * Unconditional branch, 32-bit offset. * * The branch distance is a signed code-unit offset, which we need to * double to get a byte offset. * * Unlike most opcodes, this one is allowed to branch to itself, so * our "backward branch" test must be "<=0" instead of "<0". Because * we need the V bit set, we'll use an adds to convert from Dalvik * offset to byte offset. */ /* goto/32 +AAAAAAAA */ FETCH w0, 1 // w0<- aaaa (lo) FETCH w1, 2 // w1<- AAAA (hi) orr wINST, w0, w1, lsl #16 // wINST<- AAAAaaaa b MterpCommonTakenBranchNoFlags /* ------------------------------ */ .balign 128 .L_op_packed_switch: /* 0x2b */ /* File: arm64/op_packed_switch.S */ /* * Handle a packed-switch or sparse-switch instruction. In both cases * we decode it and hand it off to a helper function. * * We don't really expect backward branches in a switch statement, but * they're perfectly legal, so we check for them here. * * for: packed-switch, sparse-switch */ /* op vAA, +BBBB */ FETCH w0, 1 // w0<- bbbb (lo) FETCH w1, 2 // w1<- BBBB (hi) lsr w3, wINST, #8 // w3<- AA orr w0, w0, w1, lsl #16 // w0<- BBBBbbbb GET_VREG w1, w3 // w1<- vAA add x0, xPC, w0, lsl #1 // w0<- PC + BBBBbbbb*2 bl MterpDoPackedSwitch // w0<- code-unit branch offset sbfm xINST, x0, 0, 31 b MterpCommonTakenBranchNoFlags /* ------------------------------ */ .balign 128 .L_op_sparse_switch: /* 0x2c */ /* File: arm64/op_sparse_switch.S */ /* File: arm64/op_packed_switch.S */ /* * Handle a packed-switch or sparse-switch instruction. In both cases * we decode it and hand it off to a helper function. * * We don't really expect backward branches in a switch statement, but * they're perfectly legal, so we check for them here. * * for: packed-switch, sparse-switch */ /* op vAA, +BBBB */ FETCH w0, 1 // w0<- bbbb (lo) FETCH w1, 2 // w1<- BBBB (hi) lsr w3, wINST, #8 // w3<- AA orr w0, w0, w1, lsl #16 // w0<- BBBBbbbb GET_VREG w1, w3 // w1<- vAA add x0, xPC, w0, lsl #1 // w0<- PC + BBBBbbbb*2 bl MterpDoSparseSwitch // w0<- code-unit branch offset sbfm xINST, x0, 0, 31 b MterpCommonTakenBranchNoFlags /* ------------------------------ */ .balign 128 .L_op_cmpl_float: /* 0x2d */ /* File: arm64/op_cmpl_float.S */ /* File: arm64/fcmp.S */ /* * Compare two floating-point values. Puts 0, 1, or -1 into the * destination register based on the results of the comparison. */ /* op vAA, vBB, vCC */ FETCH w0, 1 // w0<- CCBB lsr w4, wINST, #8 // w4<- AA and w2, w0, #255 // w2<- BB lsr w3, w0, #8 // w3<- CC GET_VREG s1, w2 GET_VREG s2, w3 mov w0, #-1 fcmp s1, s2 csneg w0, w0, w0, le csel w0, wzr, w0, eq FETCH_ADVANCE_INST 2 // advance rPC, load rINST GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w4 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_cmpg_float: /* 0x2e */ /* File: arm64/op_cmpg_float.S */ /* File: arm64/fcmp.S */ /* * Compare two floating-point values. Puts 0, 1, or -1 into the * destination register based on the results of the comparison. */ /* op vAA, vBB, vCC */ FETCH w0, 1 // w0<- CCBB lsr w4, wINST, #8 // w4<- AA and w2, w0, #255 // w2<- BB lsr w3, w0, #8 // w3<- CC GET_VREG s1, w2 GET_VREG s2, w3 mov w0, #1 fcmp s1, s2 csneg w0, w0, w0, pl csel w0, wzr, w0, eq FETCH_ADVANCE_INST 2 // advance rPC, load rINST GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w4 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_cmpl_double: /* 0x2f */ /* File: arm64/op_cmpl_double.S */ /* File: arm64/fcmp.S */ /* * Compare two floating-point values. Puts 0, 1, or -1 into the * destination register based on the results of the comparison. */ /* op vAA, vBB, vCC */ FETCH w0, 1 // w0<- CCBB lsr w4, wINST, #8 // w4<- AA and w2, w0, #255 // w2<- BB lsr w3, w0, #8 // w3<- CC GET_VREG_WIDE d1, w2 GET_VREG_WIDE d2, w3 mov w0, #-1 fcmp d1, d2 csneg w0, w0, w0, le csel w0, wzr, w0, eq FETCH_ADVANCE_INST 2 // advance rPC, load rINST GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w4 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_cmpg_double: /* 0x30 */ /* File: arm64/op_cmpg_double.S */ /* File: arm64/fcmp.S */ /* * Compare two floating-point values. Puts 0, 1, or -1 into the * destination register based on the results of the comparison. */ /* op vAA, vBB, vCC */ FETCH w0, 1 // w0<- CCBB lsr w4, wINST, #8 // w4<- AA and w2, w0, #255 // w2<- BB lsr w3, w0, #8 // w3<- CC GET_VREG_WIDE d1, w2 GET_VREG_WIDE d2, w3 mov w0, #1 fcmp d1, d2 csneg w0, w0, w0, pl csel w0, wzr, w0, eq FETCH_ADVANCE_INST 2 // advance rPC, load rINST GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w4 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_cmp_long: /* 0x31 */ /* File: arm64/op_cmp_long.S */ FETCH w0, 1 // w0<- CCBB lsr w4, wINST, #8 // w4<- AA and w2, w0, #255 // w2<- BB lsr w3, w0, #8 // w3<- CC GET_VREG_WIDE x1, w2 GET_VREG_WIDE x2, w3 cmp x1, x2 csinc w0, wzr, wzr, eq csneg w0, w0, w0, ge FETCH_ADVANCE_INST 2 // advance rPC, load wINST SET_VREG w0, w4 GET_INST_OPCODE ip // extract opcode from wINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_if_eq: /* 0x32 */ /* File: arm64/op_if_eq.S */ /* File: arm64/bincmp.S */ /* * Generic two-operand compare-and-branch operation. Provide a "condition" * fragment that specifies the comparison to perform. * * For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le */ /* if-cmp vA, vB, +CCCC */ lsr w1, wINST, #12 // w1<- B ubfx w0, wINST, #8, #4 // w0<- A GET_VREG w3, w1 // w3<- vB GET_VREG w2, w0 // w2<- vA FETCH_S wINST, 1 // wINST<- branch offset, in code units cmp w2, w3 // compare (vA, vB) b.eq MterpCommonTakenBranchNoFlags cmp wPROFILE, #JIT_CHECK_OSR // possible OSR re-entry? b.eq .L_check_not_taken_osr FETCH_ADVANCE_INST 2 GET_INST_OPCODE ip // extract opcode from wINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_if_ne: /* 0x33 */ /* File: arm64/op_if_ne.S */ /* File: arm64/bincmp.S */ /* * Generic two-operand compare-and-branch operation. Provide a "condition" * fragment that specifies the comparison to perform. * * For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le */ /* if-cmp vA, vB, +CCCC */ lsr w1, wINST, #12 // w1<- B ubfx w0, wINST, #8, #4 // w0<- A GET_VREG w3, w1 // w3<- vB GET_VREG w2, w0 // w2<- vA FETCH_S wINST, 1 // wINST<- branch offset, in code units cmp w2, w3 // compare (vA, vB) b.ne MterpCommonTakenBranchNoFlags cmp wPROFILE, #JIT_CHECK_OSR // possible OSR re-entry? b.eq .L_check_not_taken_osr FETCH_ADVANCE_INST 2 GET_INST_OPCODE ip // extract opcode from wINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_if_lt: /* 0x34 */ /* File: arm64/op_if_lt.S */ /* File: arm64/bincmp.S */ /* * Generic two-operand compare-and-branch operation. Provide a "condition" * fragment that specifies the comparison to perform. * * For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le */ /* if-cmp vA, vB, +CCCC */ lsr w1, wINST, #12 // w1<- B ubfx w0, wINST, #8, #4 // w0<- A GET_VREG w3, w1 // w3<- vB GET_VREG w2, w0 // w2<- vA FETCH_S wINST, 1 // wINST<- branch offset, in code units cmp w2, w3 // compare (vA, vB) b.lt MterpCommonTakenBranchNoFlags cmp wPROFILE, #JIT_CHECK_OSR // possible OSR re-entry? b.eq .L_check_not_taken_osr FETCH_ADVANCE_INST 2 GET_INST_OPCODE ip // extract opcode from wINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_if_ge: /* 0x35 */ /* File: arm64/op_if_ge.S */ /* File: arm64/bincmp.S */ /* * Generic two-operand compare-and-branch operation. Provide a "condition" * fragment that specifies the comparison to perform. * * For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le */ /* if-cmp vA, vB, +CCCC */ lsr w1, wINST, #12 // w1<- B ubfx w0, wINST, #8, #4 // w0<- A GET_VREG w3, w1 // w3<- vB GET_VREG w2, w0 // w2<- vA FETCH_S wINST, 1 // wINST<- branch offset, in code units cmp w2, w3 // compare (vA, vB) b.ge MterpCommonTakenBranchNoFlags cmp wPROFILE, #JIT_CHECK_OSR // possible OSR re-entry? b.eq .L_check_not_taken_osr FETCH_ADVANCE_INST 2 GET_INST_OPCODE ip // extract opcode from wINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_if_gt: /* 0x36 */ /* File: arm64/op_if_gt.S */ /* File: arm64/bincmp.S */ /* * Generic two-operand compare-and-branch operation. Provide a "condition" * fragment that specifies the comparison to perform. * * For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le */ /* if-cmp vA, vB, +CCCC */ lsr w1, wINST, #12 // w1<- B ubfx w0, wINST, #8, #4 // w0<- A GET_VREG w3, w1 // w3<- vB GET_VREG w2, w0 // w2<- vA FETCH_S wINST, 1 // wINST<- branch offset, in code units cmp w2, w3 // compare (vA, vB) b.gt MterpCommonTakenBranchNoFlags cmp wPROFILE, #JIT_CHECK_OSR // possible OSR re-entry? b.eq .L_check_not_taken_osr FETCH_ADVANCE_INST 2 GET_INST_OPCODE ip // extract opcode from wINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_if_le: /* 0x37 */ /* File: arm64/op_if_le.S */ /* File: arm64/bincmp.S */ /* * Generic two-operand compare-and-branch operation. Provide a "condition" * fragment that specifies the comparison to perform. * * For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le */ /* if-cmp vA, vB, +CCCC */ lsr w1, wINST, #12 // w1<- B ubfx w0, wINST, #8, #4 // w0<- A GET_VREG w3, w1 // w3<- vB GET_VREG w2, w0 // w2<- vA FETCH_S wINST, 1 // wINST<- branch offset, in code units cmp w2, w3 // compare (vA, vB) b.le MterpCommonTakenBranchNoFlags cmp wPROFILE, #JIT_CHECK_OSR // possible OSR re-entry? b.eq .L_check_not_taken_osr FETCH_ADVANCE_INST 2 GET_INST_OPCODE ip // extract opcode from wINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_if_eqz: /* 0x38 */ /* File: arm64/op_if_eqz.S */ /* File: arm64/zcmp.S */ /* * Generic one-operand compare-and-branch operation. Provide a "condition" * fragment that specifies the comparison to perform. * * for: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez */ /* if-cmp vAA, +BBBB */ lsr w0, wINST, #8 // w0<- AA GET_VREG w2, w0 // w2<- vAA FETCH_S wINST, 1 // w1<- branch offset, in code units cmp w2, #0 // compare (vA, 0) b.eq MterpCommonTakenBranchNoFlags cmp wPROFILE, #JIT_CHECK_OSR // possible OSR re-entry? b.eq .L_check_not_taken_osr FETCH_ADVANCE_INST 2 GET_INST_OPCODE ip // extract opcode from wINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_if_nez: /* 0x39 */ /* File: arm64/op_if_nez.S */ /* File: arm64/zcmp.S */ /* * Generic one-operand compare-and-branch operation. Provide a "condition" * fragment that specifies the comparison to perform. * * for: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez */ /* if-cmp vAA, +BBBB */ lsr w0, wINST, #8 // w0<- AA GET_VREG w2, w0 // w2<- vAA FETCH_S wINST, 1 // w1<- branch offset, in code units cmp w2, #0 // compare (vA, 0) b.ne MterpCommonTakenBranchNoFlags cmp wPROFILE, #JIT_CHECK_OSR // possible OSR re-entry? b.eq .L_check_not_taken_osr FETCH_ADVANCE_INST 2 GET_INST_OPCODE ip // extract opcode from wINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_if_ltz: /* 0x3a */ /* File: arm64/op_if_ltz.S */ /* File: arm64/zcmp.S */ /* * Generic one-operand compare-and-branch operation. Provide a "condition" * fragment that specifies the comparison to perform. * * for: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez */ /* if-cmp vAA, +BBBB */ lsr w0, wINST, #8 // w0<- AA GET_VREG w2, w0 // w2<- vAA FETCH_S wINST, 1 // w1<- branch offset, in code units cmp w2, #0 // compare (vA, 0) b.lt MterpCommonTakenBranchNoFlags cmp wPROFILE, #JIT_CHECK_OSR // possible OSR re-entry? b.eq .L_check_not_taken_osr FETCH_ADVANCE_INST 2 GET_INST_OPCODE ip // extract opcode from wINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_if_gez: /* 0x3b */ /* File: arm64/op_if_gez.S */ /* File: arm64/zcmp.S */ /* * Generic one-operand compare-and-branch operation. Provide a "condition" * fragment that specifies the comparison to perform. * * for: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez */ /* if-cmp vAA, +BBBB */ lsr w0, wINST, #8 // w0<- AA GET_VREG w2, w0 // w2<- vAA FETCH_S wINST, 1 // w1<- branch offset, in code units cmp w2, #0 // compare (vA, 0) b.ge MterpCommonTakenBranchNoFlags cmp wPROFILE, #JIT_CHECK_OSR // possible OSR re-entry? b.eq .L_check_not_taken_osr FETCH_ADVANCE_INST 2 GET_INST_OPCODE ip // extract opcode from wINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_if_gtz: /* 0x3c */ /* File: arm64/op_if_gtz.S */ /* File: arm64/zcmp.S */ /* * Generic one-operand compare-and-branch operation. Provide a "condition" * fragment that specifies the comparison to perform. * * for: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez */ /* if-cmp vAA, +BBBB */ lsr w0, wINST, #8 // w0<- AA GET_VREG w2, w0 // w2<- vAA FETCH_S wINST, 1 // w1<- branch offset, in code units cmp w2, #0 // compare (vA, 0) b.gt MterpCommonTakenBranchNoFlags cmp wPROFILE, #JIT_CHECK_OSR // possible OSR re-entry? b.eq .L_check_not_taken_osr FETCH_ADVANCE_INST 2 GET_INST_OPCODE ip // extract opcode from wINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_if_lez: /* 0x3d */ /* File: arm64/op_if_lez.S */ /* File: arm64/zcmp.S */ /* * Generic one-operand compare-and-branch operation. Provide a "condition" * fragment that specifies the comparison to perform. * * for: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez */ /* if-cmp vAA, +BBBB */ lsr w0, wINST, #8 // w0<- AA GET_VREG w2, w0 // w2<- vAA FETCH_S wINST, 1 // w1<- branch offset, in code units cmp w2, #0 // compare (vA, 0) b.le MterpCommonTakenBranchNoFlags cmp wPROFILE, #JIT_CHECK_OSR // possible OSR re-entry? b.eq .L_check_not_taken_osr FETCH_ADVANCE_INST 2 GET_INST_OPCODE ip // extract opcode from wINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_unused_3e: /* 0x3e */ /* File: arm64/op_unused_3e.S */ /* File: arm64/unused.S */ /* * Bail to reference interpreter to throw. */ b MterpFallback /* ------------------------------ */ .balign 128 .L_op_unused_3f: /* 0x3f */ /* File: arm64/op_unused_3f.S */ /* File: arm64/unused.S */ /* * Bail to reference interpreter to throw. */ b MterpFallback /* ------------------------------ */ .balign 128 .L_op_unused_40: /* 0x40 */ /* File: arm64/op_unused_40.S */ /* File: arm64/unused.S */ /* * Bail to reference interpreter to throw. */ b MterpFallback /* ------------------------------ */ .balign 128 .L_op_unused_41: /* 0x41 */ /* File: arm64/op_unused_41.S */ /* File: arm64/unused.S */ /* * Bail to reference interpreter to throw. */ b MterpFallback /* ------------------------------ */ .balign 128 .L_op_unused_42: /* 0x42 */ /* File: arm64/op_unused_42.S */ /* File: arm64/unused.S */ /* * Bail to reference interpreter to throw. */ b MterpFallback /* ------------------------------ */ .balign 128 .L_op_unused_43: /* 0x43 */ /* File: arm64/op_unused_43.S */ /* File: arm64/unused.S */ /* * Bail to reference interpreter to throw. */ b MterpFallback /* ------------------------------ */ .balign 128 .L_op_aget: /* 0x44 */ /* File: arm64/op_aget.S */ /* * Array get, 32 bits or less. vAA <- vBB[vCC]. * * Note: using the usual FETCH/and/shift stuff, this fits in exactly 17 * instructions. We use a pair of FETCH_Bs instead. * * for: aget, aget-boolean, aget-byte, aget-char, aget-short * * NOTE: assumes data offset for arrays is the same for all non-wide types. * If this changes, specialize. */ /* op vAA, vBB, vCC */ FETCH_B w2, 1, 0 // w2<- BB lsr w9, wINST, #8 // w9<- AA FETCH_B w3, 1, 1 // w3<- CC GET_VREG w0, w2 // w0<- vBB (array object) GET_VREG w1, w3 // w1<- vCC (requested index) cbz x0, common_errNullObject // bail if null array object. ldr w3, [x0, #MIRROR_ARRAY_LENGTH_OFFSET] // w3<- arrayObj->length add x0, x0, w1, uxtw #2 // w0<- arrayObj + index*width cmp w1, w3 // compare unsigned index, length bcs common_errArrayIndex // index >= length, bail FETCH_ADVANCE_INST 2 // advance rPC, load rINST ldr w2, [x0, #MIRROR_INT_ARRAY_DATA_OFFSET] // w2<- vBB[vCC] GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w2, w9 // vAA<- w2 GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_aget_wide: /* 0x45 */ /* File: arm64/op_aget_wide.S */ /* * Array get, 64 bits. vAA <- vBB[vCC]. * */ /* aget-wide vAA, vBB, vCC */ FETCH w0, 1 // w0<- CCBB lsr w4, wINST, #8 // w4<- AA and w2, w0, #255 // w2<- BB lsr w3, w0, #8 // w3<- CC GET_VREG w0, w2 // w0<- vBB (array object) GET_VREG w1, w3 // w1<- vCC (requested index) cbz w0, common_errNullObject // yes, bail ldr w3, [x0, #MIRROR_ARRAY_LENGTH_OFFSET] // w3<- arrayObj->length add x0, x0, w1, lsl #3 // w0<- arrayObj + index*width cmp w1, w3 // compare unsigned index, length bcs common_errArrayIndex // index >= length, bail FETCH_ADVANCE_INST 2 // advance rPC, load wINST ldr x2, [x0, #MIRROR_WIDE_ARRAY_DATA_OFFSET] // x2<- vBB[vCC] GET_INST_OPCODE ip // extract opcode from wINST SET_VREG_WIDE x2, w4 GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_aget_object: /* 0x46 */ /* File: arm64/op_aget_object.S */ /* * Array object get. vAA <- vBB[vCC]. * * for: aget-object */ /* op vAA, vBB, vCC */ FETCH_B w2, 1, 0 // w2<- BB FETCH_B w3, 1, 1 // w3<- CC EXPORT_PC GET_VREG w0, w2 // w0<- vBB (array object) GET_VREG w1, w3 // w1<- vCC (requested index) bl artAGetObjectFromMterp // (array, index) ldr x1, [xSELF, #THREAD_EXCEPTION_OFFSET] lsr w2, wINST, #8 // w9<- AA PREFETCH_INST 2 cbnz w1, MterpException SET_VREG_OBJECT w0, w2 ADVANCE 2 GET_INST_OPCODE ip GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_aget_boolean: /* 0x47 */ /* File: arm64/op_aget_boolean.S */ /* File: arm64/op_aget.S */ /* * Array get, 32 bits or less. vAA <- vBB[vCC]. * * Note: using the usual FETCH/and/shift stuff, this fits in exactly 17 * instructions. We use a pair of FETCH_Bs instead. * * for: aget, aget-boolean, aget-byte, aget-char, aget-short * * NOTE: assumes data offset for arrays is the same for all non-wide types. * If this changes, specialize. */ /* op vAA, vBB, vCC */ FETCH_B w2, 1, 0 // w2<- BB lsr w9, wINST, #8 // w9<- AA FETCH_B w3, 1, 1 // w3<- CC GET_VREG w0, w2 // w0<- vBB (array object) GET_VREG w1, w3 // w1<- vCC (requested index) cbz x0, common_errNullObject // bail if null array object. ldr w3, [x0, #MIRROR_ARRAY_LENGTH_OFFSET] // w3<- arrayObj->length add x0, x0, w1, uxtw #0 // w0<- arrayObj + index*width cmp w1, w3 // compare unsigned index, length bcs common_errArrayIndex // index >= length, bail FETCH_ADVANCE_INST 2 // advance rPC, load rINST ldrb w2, [x0, #MIRROR_BOOLEAN_ARRAY_DATA_OFFSET] // w2<- vBB[vCC] GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w2, w9 // vAA<- w2 GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_aget_byte: /* 0x48 */ /* File: arm64/op_aget_byte.S */ /* File: arm64/op_aget.S */ /* * Array get, 32 bits or less. vAA <- vBB[vCC]. * * Note: using the usual FETCH/and/shift stuff, this fits in exactly 17 * instructions. We use a pair of FETCH_Bs instead. * * for: aget, aget-boolean, aget-byte, aget-char, aget-short * * NOTE: assumes data offset for arrays is the same for all non-wide types. * If this changes, specialize. */ /* op vAA, vBB, vCC */ FETCH_B w2, 1, 0 // w2<- BB lsr w9, wINST, #8 // w9<- AA FETCH_B w3, 1, 1 // w3<- CC GET_VREG w0, w2 // w0<- vBB (array object) GET_VREG w1, w3 // w1<- vCC (requested index) cbz x0, common_errNullObject // bail if null array object. ldr w3, [x0, #MIRROR_ARRAY_LENGTH_OFFSET] // w3<- arrayObj->length add x0, x0, w1, uxtw #0 // w0<- arrayObj + index*width cmp w1, w3 // compare unsigned index, length bcs common_errArrayIndex // index >= length, bail FETCH_ADVANCE_INST 2 // advance rPC, load rINST ldrsb w2, [x0, #MIRROR_BYTE_ARRAY_DATA_OFFSET] // w2<- vBB[vCC] GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w2, w9 // vAA<- w2 GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_aget_char: /* 0x49 */ /* File: arm64/op_aget_char.S */ /* File: arm64/op_aget.S */ /* * Array get, 32 bits or less. vAA <- vBB[vCC]. * * Note: using the usual FETCH/and/shift stuff, this fits in exactly 17 * instructions. We use a pair of FETCH_Bs instead. * * for: aget, aget-boolean, aget-byte, aget-char, aget-short * * NOTE: assumes data offset for arrays is the same for all non-wide types. * If this changes, specialize. */ /* op vAA, vBB, vCC */ FETCH_B w2, 1, 0 // w2<- BB lsr w9, wINST, #8 // w9<- AA FETCH_B w3, 1, 1 // w3<- CC GET_VREG w0, w2 // w0<- vBB (array object) GET_VREG w1, w3 // w1<- vCC (requested index) cbz x0, common_errNullObject // bail if null array object. ldr w3, [x0, #MIRROR_ARRAY_LENGTH_OFFSET] // w3<- arrayObj->length add x0, x0, w1, uxtw #1 // w0<- arrayObj + index*width cmp w1, w3 // compare unsigned index, length bcs common_errArrayIndex // index >= length, bail FETCH_ADVANCE_INST 2 // advance rPC, load rINST ldrh w2, [x0, #MIRROR_CHAR_ARRAY_DATA_OFFSET] // w2<- vBB[vCC] GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w2, w9 // vAA<- w2 GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_aget_short: /* 0x4a */ /* File: arm64/op_aget_short.S */ /* File: arm64/op_aget.S */ /* * Array get, 32 bits or less. vAA <- vBB[vCC]. * * Note: using the usual FETCH/and/shift stuff, this fits in exactly 17 * instructions. We use a pair of FETCH_Bs instead. * * for: aget, aget-boolean, aget-byte, aget-char, aget-short * * NOTE: assumes data offset for arrays is the same for all non-wide types. * If this changes, specialize. */ /* op vAA, vBB, vCC */ FETCH_B w2, 1, 0 // w2<- BB lsr w9, wINST, #8 // w9<- AA FETCH_B w3, 1, 1 // w3<- CC GET_VREG w0, w2 // w0<- vBB (array object) GET_VREG w1, w3 // w1<- vCC (requested index) cbz x0, common_errNullObject // bail if null array object. ldr w3, [x0, #MIRROR_ARRAY_LENGTH_OFFSET] // w3<- arrayObj->length add x0, x0, w1, uxtw #1 // w0<- arrayObj + index*width cmp w1, w3 // compare unsigned index, length bcs common_errArrayIndex // index >= length, bail FETCH_ADVANCE_INST 2 // advance rPC, load rINST ldrsh w2, [x0, #MIRROR_SHORT_ARRAY_DATA_OFFSET] // w2<- vBB[vCC] GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w2, w9 // vAA<- w2 GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_aput: /* 0x4b */ /* File: arm64/op_aput.S */ /* * Array put, 32 bits or less. vBB[vCC] <- vAA. * * Note: using the usual FETCH/and/shift stuff, this fits in exactly 17 * instructions. We use a pair of FETCH_Bs instead. * * for: aput, aput-boolean, aput-byte, aput-char, aput-short * * NOTE: this assumes data offset for arrays is the same for all non-wide types. * If this changes, specialize. */ /* op vAA, vBB, vCC */ FETCH_B w2, 1, 0 // w2<- BB lsr w9, wINST, #8 // w9<- AA FETCH_B w3, 1, 1 // w3<- CC GET_VREG w0, w2 // w0<- vBB (array object) GET_VREG w1, w3 // w1<- vCC (requested index) cbz w0, common_errNullObject // bail if null ldr w3, [x0, #MIRROR_ARRAY_LENGTH_OFFSET] // w3<- arrayObj->length add x0, x0, w1, lsl #2 // w0<- arrayObj + index*width cmp w1, w3 // compare unsigned index, length bcs common_errArrayIndex // index >= length, bail FETCH_ADVANCE_INST 2 // advance rPC, load rINST GET_VREG w2, w9 // w2<- vAA GET_INST_OPCODE ip // extract opcode from rINST str w2, [x0, #MIRROR_INT_ARRAY_DATA_OFFSET] // vBB[vCC]<- w2 GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_aput_wide: /* 0x4c */ /* File: arm64/op_aput_wide.S */ /* * Array put, 64 bits. vBB[vCC] <- vAA. * */ /* aput-wide vAA, vBB, vCC */ FETCH w0, 1 // w0<- CCBB lsr w4, wINST, #8 // w4<- AA and w2, w0, #255 // w2<- BB lsr w3, w0, #8 // w3<- CC GET_VREG w0, w2 // w0<- vBB (array object) GET_VREG w1, w3 // w1<- vCC (requested index) cbz w0, common_errNullObject // bail if null ldr w3, [x0, #MIRROR_ARRAY_LENGTH_OFFSET] // w3<- arrayObj->length add x0, x0, w1, lsl #3 // w0<- arrayObj + index*width cmp w1, w3 // compare unsigned index, length bcs common_errArrayIndex // index >= length, bail GET_VREG_WIDE x1, w4 FETCH_ADVANCE_INST 2 // advance rPC, load wINST GET_INST_OPCODE ip // extract opcode from wINST str x1, [x0, #MIRROR_WIDE_ARRAY_DATA_OFFSET] GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_aput_object: /* 0x4d */ /* File: arm64/op_aput_object.S */ /* * Store an object into an array. vBB[vCC] <- vAA. */ /* op vAA, vBB, vCC */ EXPORT_PC add x0, xFP, #OFF_FP_SHADOWFRAME mov x1, xPC mov w2, wINST bl MterpAputObject cbz w0, MterpPossibleException FETCH_ADVANCE_INST 2 // advance rPC, load rINST GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_aput_boolean: /* 0x4e */ /* File: arm64/op_aput_boolean.S */ /* File: arm64/op_aput.S */ /* * Array put, 32 bits or less. vBB[vCC] <- vAA. * * Note: using the usual FETCH/and/shift stuff, this fits in exactly 17 * instructions. We use a pair of FETCH_Bs instead. * * for: aput, aput-boolean, aput-byte, aput-char, aput-short * * NOTE: this assumes data offset for arrays is the same for all non-wide types. * If this changes, specialize. */ /* op vAA, vBB, vCC */ FETCH_B w2, 1, 0 // w2<- BB lsr w9, wINST, #8 // w9<- AA FETCH_B w3, 1, 1 // w3<- CC GET_VREG w0, w2 // w0<- vBB (array object) GET_VREG w1, w3 // w1<- vCC (requested index) cbz w0, common_errNullObject // bail if null ldr w3, [x0, #MIRROR_ARRAY_LENGTH_OFFSET] // w3<- arrayObj->length add x0, x0, w1, lsl #0 // w0<- arrayObj + index*width cmp w1, w3 // compare unsigned index, length bcs common_errArrayIndex // index >= length, bail FETCH_ADVANCE_INST 2 // advance rPC, load rINST GET_VREG w2, w9 // w2<- vAA GET_INST_OPCODE ip // extract opcode from rINST strb w2, [x0, #MIRROR_BOOLEAN_ARRAY_DATA_OFFSET] // vBB[vCC]<- w2 GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_aput_byte: /* 0x4f */ /* File: arm64/op_aput_byte.S */ /* File: arm64/op_aput.S */ /* * Array put, 32 bits or less. vBB[vCC] <- vAA. * * Note: using the usual FETCH/and/shift stuff, this fits in exactly 17 * instructions. We use a pair of FETCH_Bs instead. * * for: aput, aput-boolean, aput-byte, aput-char, aput-short * * NOTE: this assumes data offset for arrays is the same for all non-wide types. * If this changes, specialize. */ /* op vAA, vBB, vCC */ FETCH_B w2, 1, 0 // w2<- BB lsr w9, wINST, #8 // w9<- AA FETCH_B w3, 1, 1 // w3<- CC GET_VREG w0, w2 // w0<- vBB (array object) GET_VREG w1, w3 // w1<- vCC (requested index) cbz w0, common_errNullObject // bail if null ldr w3, [x0, #MIRROR_ARRAY_LENGTH_OFFSET] // w3<- arrayObj->length add x0, x0, w1, lsl #0 // w0<- arrayObj + index*width cmp w1, w3 // compare unsigned index, length bcs common_errArrayIndex // index >= length, bail FETCH_ADVANCE_INST 2 // advance rPC, load rINST GET_VREG w2, w9 // w2<- vAA GET_INST_OPCODE ip // extract opcode from rINST strb w2, [x0, #MIRROR_BYTE_ARRAY_DATA_OFFSET] // vBB[vCC]<- w2 GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_aput_char: /* 0x50 */ /* File: arm64/op_aput_char.S */ /* File: arm64/op_aput.S */ /* * Array put, 32 bits or less. vBB[vCC] <- vAA. * * Note: using the usual FETCH/and/shift stuff, this fits in exactly 17 * instructions. We use a pair of FETCH_Bs instead. * * for: aput, aput-boolean, aput-byte, aput-char, aput-short * * NOTE: this assumes data offset for arrays is the same for all non-wide types. * If this changes, specialize. */ /* op vAA, vBB, vCC */ FETCH_B w2, 1, 0 // w2<- BB lsr w9, wINST, #8 // w9<- AA FETCH_B w3, 1, 1 // w3<- CC GET_VREG w0, w2 // w0<- vBB (array object) GET_VREG w1, w3 // w1<- vCC (requested index) cbz w0, common_errNullObject // bail if null ldr w3, [x0, #MIRROR_ARRAY_LENGTH_OFFSET] // w3<- arrayObj->length add x0, x0, w1, lsl #1 // w0<- arrayObj + index*width cmp w1, w3 // compare unsigned index, length bcs common_errArrayIndex // index >= length, bail FETCH_ADVANCE_INST 2 // advance rPC, load rINST GET_VREG w2, w9 // w2<- vAA GET_INST_OPCODE ip // extract opcode from rINST strh w2, [x0, #MIRROR_CHAR_ARRAY_DATA_OFFSET] // vBB[vCC]<- w2 GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_aput_short: /* 0x51 */ /* File: arm64/op_aput_short.S */ /* File: arm64/op_aput.S */ /* * Array put, 32 bits or less. vBB[vCC] <- vAA. * * Note: using the usual FETCH/and/shift stuff, this fits in exactly 17 * instructions. We use a pair of FETCH_Bs instead. * * for: aput, aput-boolean, aput-byte, aput-char, aput-short * * NOTE: this assumes data offset for arrays is the same for all non-wide types. * If this changes, specialize. */ /* op vAA, vBB, vCC */ FETCH_B w2, 1, 0 // w2<- BB lsr w9, wINST, #8 // w9<- AA FETCH_B w3, 1, 1 // w3<- CC GET_VREG w0, w2 // w0<- vBB (array object) GET_VREG w1, w3 // w1<- vCC (requested index) cbz w0, common_errNullObject // bail if null ldr w3, [x0, #MIRROR_ARRAY_LENGTH_OFFSET] // w3<- arrayObj->length add x0, x0, w1, lsl #1 // w0<- arrayObj + index*width cmp w1, w3 // compare unsigned index, length bcs common_errArrayIndex // index >= length, bail FETCH_ADVANCE_INST 2 // advance rPC, load rINST GET_VREG w2, w9 // w2<- vAA GET_INST_OPCODE ip // extract opcode from rINST strh w2, [x0, #MIRROR_SHORT_ARRAY_DATA_OFFSET] // vBB[vCC]<- w2 GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_iget: /* 0x52 */ /* File: arm64/op_iget.S */ /* * General instance field get. * * for: iget, iget-object, iget-boolean, iget-byte, iget-char, iget-short */ EXPORT_PC FETCH w0, 1 // w0<- field ref CCCC lsr w1, wINST, #12 // w1<- B GET_VREG w1, w1 // w1<- fp[B], the object pointer ldr x2, [xFP, #OFF_FP_METHOD] // w2<- referrer mov x3, xSELF // w3<- self bl artGet32InstanceFromCode ldr x3, [xSELF, #THREAD_EXCEPTION_OFFSET] ubfx w2, wINST, #8, #4 // w2<- A PREFETCH_INST 2 cbnz x3, MterpPossibleException // bail out .if 0 SET_VREG_OBJECT w0, w2 // fp[A]<- w0 .else SET_VREG w0, w2 // fp[A]<- w0 .endif ADVANCE 2 GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_iget_wide: /* 0x53 */ /* File: arm64/op_iget_wide.S */ /* * 64-bit instance field get. * * for: iget-wide */ EXPORT_PC FETCH w0, 1 // w0<- field ref CCCC lsr w1, wINST, #12 // w1<- B GET_VREG w1, w1 // w1<- fp[B], the object pointer ldr x2, [xFP, #OFF_FP_METHOD] // w2<- referrer mov x3, xSELF // w3<- self bl artGet64InstanceFromCode ldr x3, [xSELF, #THREAD_EXCEPTION_OFFSET] ubfx w2, wINST, #8, #4 // w2<- A PREFETCH_INST 2 cmp w3, #0 cbnz w3, MterpException // bail out SET_VREG_WIDE x0, w2 ADVANCE 2 GET_INST_OPCODE ip // extract opcode from wINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_iget_object: /* 0x54 */ /* File: arm64/op_iget_object.S */ /* File: arm64/op_iget.S */ /* * General instance field get. * * for: iget, iget-object, iget-boolean, iget-byte, iget-char, iget-short */ EXPORT_PC FETCH w0, 1 // w0<- field ref CCCC lsr w1, wINST, #12 // w1<- B GET_VREG w1, w1 // w1<- fp[B], the object pointer ldr x2, [xFP, #OFF_FP_METHOD] // w2<- referrer mov x3, xSELF // w3<- self bl artGetObjInstanceFromCode ldr x3, [xSELF, #THREAD_EXCEPTION_OFFSET] ubfx w2, wINST, #8, #4 // w2<- A PREFETCH_INST 2 cbnz x3, MterpPossibleException // bail out .if 1 SET_VREG_OBJECT w0, w2 // fp[A]<- w0 .else SET_VREG w0, w2 // fp[A]<- w0 .endif ADVANCE 2 GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_iget_boolean: /* 0x55 */ /* File: arm64/op_iget_boolean.S */ /* File: arm64/op_iget.S */ /* * General instance field get. * * for: iget, iget-object, iget-boolean, iget-byte, iget-char, iget-short */ EXPORT_PC FETCH w0, 1 // w0<- field ref CCCC lsr w1, wINST, #12 // w1<- B GET_VREG w1, w1 // w1<- fp[B], the object pointer ldr x2, [xFP, #OFF_FP_METHOD] // w2<- referrer mov x3, xSELF // w3<- self bl artGetBooleanInstanceFromCode ldr x3, [xSELF, #THREAD_EXCEPTION_OFFSET] uxtb w0, w0 ubfx w2, wINST, #8, #4 // w2<- A PREFETCH_INST 2 cbnz x3, MterpPossibleException // bail out .if 0 SET_VREG_OBJECT w0, w2 // fp[A]<- w0 .else SET_VREG w0, w2 // fp[A]<- w0 .endif ADVANCE 2 GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_iget_byte: /* 0x56 */ /* File: arm64/op_iget_byte.S */ /* File: arm64/op_iget.S */ /* * General instance field get. * * for: iget, iget-object, iget-boolean, iget-byte, iget-char, iget-short */ EXPORT_PC FETCH w0, 1 // w0<- field ref CCCC lsr w1, wINST, #12 // w1<- B GET_VREG w1, w1 // w1<- fp[B], the object pointer ldr x2, [xFP, #OFF_FP_METHOD] // w2<- referrer mov x3, xSELF // w3<- self bl artGetByteInstanceFromCode ldr x3, [xSELF, #THREAD_EXCEPTION_OFFSET] sxtb w0, w0 ubfx w2, wINST, #8, #4 // w2<- A PREFETCH_INST 2 cbnz x3, MterpPossibleException // bail out .if 0 SET_VREG_OBJECT w0, w2 // fp[A]<- w0 .else SET_VREG w0, w2 // fp[A]<- w0 .endif ADVANCE 2 GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_iget_char: /* 0x57 */ /* File: arm64/op_iget_char.S */ /* File: arm64/op_iget.S */ /* * General instance field get. * * for: iget, iget-object, iget-boolean, iget-byte, iget-char, iget-short */ EXPORT_PC FETCH w0, 1 // w0<- field ref CCCC lsr w1, wINST, #12 // w1<- B GET_VREG w1, w1 // w1<- fp[B], the object pointer ldr x2, [xFP, #OFF_FP_METHOD] // w2<- referrer mov x3, xSELF // w3<- self bl artGetCharInstanceFromCode ldr x3, [xSELF, #THREAD_EXCEPTION_OFFSET] uxth w0, w0 ubfx w2, wINST, #8, #4 // w2<- A PREFETCH_INST 2 cbnz x3, MterpPossibleException // bail out .if 0 SET_VREG_OBJECT w0, w2 // fp[A]<- w0 .else SET_VREG w0, w2 // fp[A]<- w0 .endif ADVANCE 2 GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_iget_short: /* 0x58 */ /* File: arm64/op_iget_short.S */ /* File: arm64/op_iget.S */ /* * General instance field get. * * for: iget, iget-object, iget-boolean, iget-byte, iget-char, iget-short */ EXPORT_PC FETCH w0, 1 // w0<- field ref CCCC lsr w1, wINST, #12 // w1<- B GET_VREG w1, w1 // w1<- fp[B], the object pointer ldr x2, [xFP, #OFF_FP_METHOD] // w2<- referrer mov x3, xSELF // w3<- self bl artGetShortInstanceFromCode ldr x3, [xSELF, #THREAD_EXCEPTION_OFFSET] sxth w0, w0 ubfx w2, wINST, #8, #4 // w2<- A PREFETCH_INST 2 cbnz x3, MterpPossibleException // bail out .if 0 SET_VREG_OBJECT w0, w2 // fp[A]<- w0 .else SET_VREG w0, w2 // fp[A]<- w0 .endif ADVANCE 2 GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_iput: /* 0x59 */ /* File: arm64/op_iput.S */ /* * General 32-bit instance field put. * * for: iput, iput-object, iput-boolean, iput-byte, iput-char, iput-short */ /* op vA, vB, field//CCCC */ .extern artSet32InstanceFromMterp EXPORT_PC FETCH w0, 1 // w0<- field ref CCCC lsr w1, wINST, #12 // w1<- B GET_VREG w1, w1 // w1<- fp[B], the object pointer ubfx w2, wINST, #8, #4 // w2<- A GET_VREG w2, w2 // w2<- fp[A] ldr x3, [xFP, #OFF_FP_METHOD] // w3<- referrer PREFETCH_INST 2 bl artSet32InstanceFromMterp cbnz w0, MterpPossibleException ADVANCE 2 // advance rPC GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_iput_wide: /* 0x5a */ /* File: arm64/op_iput_wide.S */ /* iput-wide vA, vB, field//CCCC */ .extern artSet64InstanceFromMterp EXPORT_PC FETCH w0, 1 // w0<- field ref CCCC lsr w1, wINST, #12 // w1<- B GET_VREG w1, w1 // w1<- fp[B], the object pointer ubfx w2, wINST, #8, #4 // w2<- A VREG_INDEX_TO_ADDR x2, x2 // w2<- &fp[A] ldr x3, [xFP, #OFF_FP_METHOD] // w3<- referrer PREFETCH_INST 2 bl artSet64InstanceFromMterp cbnz w0, MterpPossibleException ADVANCE 2 // advance rPC GET_INST_OPCODE ip // extract opcode from wINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_iput_object: /* 0x5b */ /* File: arm64/op_iput_object.S */ EXPORT_PC add x0, xFP, #OFF_FP_SHADOWFRAME mov x1, xPC mov w2, wINST mov x3, xSELF bl MterpIputObject cbz w0, MterpException FETCH_ADVANCE_INST 2 // advance rPC, load rINST GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_iput_boolean: /* 0x5c */ /* File: arm64/op_iput_boolean.S */ /* File: arm64/op_iput.S */ /* * General 32-bit instance field put. * * for: iput, iput-object, iput-boolean, iput-byte, iput-char, iput-short */ /* op vA, vB, field//CCCC */ .extern artSet8InstanceFromMterp EXPORT_PC FETCH w0, 1 // w0<- field ref CCCC lsr w1, wINST, #12 // w1<- B GET_VREG w1, w1 // w1<- fp[B], the object pointer ubfx w2, wINST, #8, #4 // w2<- A GET_VREG w2, w2 // w2<- fp[A] ldr x3, [xFP, #OFF_FP_METHOD] // w3<- referrer PREFETCH_INST 2 bl artSet8InstanceFromMterp cbnz w0, MterpPossibleException ADVANCE 2 // advance rPC GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_iput_byte: /* 0x5d */ /* File: arm64/op_iput_byte.S */ /* File: arm64/op_iput.S */ /* * General 32-bit instance field put. * * for: iput, iput-object, iput-boolean, iput-byte, iput-char, iput-short */ /* op vA, vB, field//CCCC */ .extern artSet8InstanceFromMterp EXPORT_PC FETCH w0, 1 // w0<- field ref CCCC lsr w1, wINST, #12 // w1<- B GET_VREG w1, w1 // w1<- fp[B], the object pointer ubfx w2, wINST, #8, #4 // w2<- A GET_VREG w2, w2 // w2<- fp[A] ldr x3, [xFP, #OFF_FP_METHOD] // w3<- referrer PREFETCH_INST 2 bl artSet8InstanceFromMterp cbnz w0, MterpPossibleException ADVANCE 2 // advance rPC GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_iput_char: /* 0x5e */ /* File: arm64/op_iput_char.S */ /* File: arm64/op_iput.S */ /* * General 32-bit instance field put. * * for: iput, iput-object, iput-boolean, iput-byte, iput-char, iput-short */ /* op vA, vB, field//CCCC */ .extern artSet16InstanceFromMterp EXPORT_PC FETCH w0, 1 // w0<- field ref CCCC lsr w1, wINST, #12 // w1<- B GET_VREG w1, w1 // w1<- fp[B], the object pointer ubfx w2, wINST, #8, #4 // w2<- A GET_VREG w2, w2 // w2<- fp[A] ldr x3, [xFP, #OFF_FP_METHOD] // w3<- referrer PREFETCH_INST 2 bl artSet16InstanceFromMterp cbnz w0, MterpPossibleException ADVANCE 2 // advance rPC GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_iput_short: /* 0x5f */ /* File: arm64/op_iput_short.S */ /* File: arm64/op_iput.S */ /* * General 32-bit instance field put. * * for: iput, iput-object, iput-boolean, iput-byte, iput-char, iput-short */ /* op vA, vB, field//CCCC */ .extern artSet16InstanceFromMterp EXPORT_PC FETCH w0, 1 // w0<- field ref CCCC lsr w1, wINST, #12 // w1<- B GET_VREG w1, w1 // w1<- fp[B], the object pointer ubfx w2, wINST, #8, #4 // w2<- A GET_VREG w2, w2 // w2<- fp[A] ldr x3, [xFP, #OFF_FP_METHOD] // w3<- referrer PREFETCH_INST 2 bl artSet16InstanceFromMterp cbnz w0, MterpPossibleException ADVANCE 2 // advance rPC GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_sget: /* 0x60 */ /* File: arm64/op_sget.S */ /* * General SGET handler wrapper. * * for: sget, sget-object, sget-boolean, sget-byte, sget-char, sget-short */ /* op vAA, field//BBBB */ .extern artGet32StaticFromCode EXPORT_PC FETCH w0, 1 // w0<- field ref BBBB ldr x1, [xFP, #OFF_FP_METHOD] mov x2, xSELF bl artGet32StaticFromCode ldr x3, [xSELF, #THREAD_EXCEPTION_OFFSET] lsr w2, wINST, #8 // w2<- AA PREFETCH_INST 2 cbnz x3, MterpException // bail out .if 0 SET_VREG_OBJECT w0, w2 // fp[AA]<- w0 .else SET_VREG w0, w2 // fp[AA]<- w0 .endif ADVANCE 2 GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip /* ------------------------------ */ .balign 128 .L_op_sget_wide: /* 0x61 */ /* File: arm64/op_sget_wide.S */ /* * SGET_WIDE handler wrapper. * */ /* sget-wide vAA, field//BBBB */ .extern artGet64StaticFromCode EXPORT_PC FETCH w0, 1 // w0<- field ref BBBB ldr x1, [xFP, #OFF_FP_METHOD] mov x2, xSELF bl artGet64StaticFromCode ldr x3, [xSELF, #THREAD_EXCEPTION_OFFSET] lsr w4, wINST, #8 // w4<- AA cbnz x3, MterpException // bail out FETCH_ADVANCE_INST 2 // advance rPC, load wINST SET_VREG_WIDE x0, w4 GET_INST_OPCODE ip // extract opcode from wINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_sget_object: /* 0x62 */ /* File: arm64/op_sget_object.S */ /* File: arm64/op_sget.S */ /* * General SGET handler wrapper. * * for: sget, sget-object, sget-boolean, sget-byte, sget-char, sget-short */ /* op vAA, field//BBBB */ .extern artGetObjStaticFromCode EXPORT_PC FETCH w0, 1 // w0<- field ref BBBB ldr x1, [xFP, #OFF_FP_METHOD] mov x2, xSELF bl artGetObjStaticFromCode ldr x3, [xSELF, #THREAD_EXCEPTION_OFFSET] lsr w2, wINST, #8 // w2<- AA PREFETCH_INST 2 cbnz x3, MterpException // bail out .if 1 SET_VREG_OBJECT w0, w2 // fp[AA]<- w0 .else SET_VREG w0, w2 // fp[AA]<- w0 .endif ADVANCE 2 GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip /* ------------------------------ */ .balign 128 .L_op_sget_boolean: /* 0x63 */ /* File: arm64/op_sget_boolean.S */ /* File: arm64/op_sget.S */ /* * General SGET handler wrapper. * * for: sget, sget-object, sget-boolean, sget-byte, sget-char, sget-short */ /* op vAA, field//BBBB */ .extern artGetBooleanStaticFromCode EXPORT_PC FETCH w0, 1 // w0<- field ref BBBB ldr x1, [xFP, #OFF_FP_METHOD] mov x2, xSELF bl artGetBooleanStaticFromCode ldr x3, [xSELF, #THREAD_EXCEPTION_OFFSET] lsr w2, wINST, #8 // w2<- AA uxtb w0, w0 PREFETCH_INST 2 cbnz x3, MterpException // bail out .if 0 SET_VREG_OBJECT w0, w2 // fp[AA]<- w0 .else SET_VREG w0, w2 // fp[AA]<- w0 .endif ADVANCE 2 GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip /* ------------------------------ */ .balign 128 .L_op_sget_byte: /* 0x64 */ /* File: arm64/op_sget_byte.S */ /* File: arm64/op_sget.S */ /* * General SGET handler wrapper. * * for: sget, sget-object, sget-boolean, sget-byte, sget-char, sget-short */ /* op vAA, field//BBBB */ .extern artGetByteStaticFromCode EXPORT_PC FETCH w0, 1 // w0<- field ref BBBB ldr x1, [xFP, #OFF_FP_METHOD] mov x2, xSELF bl artGetByteStaticFromCode ldr x3, [xSELF, #THREAD_EXCEPTION_OFFSET] lsr w2, wINST, #8 // w2<- AA sxtb w0, w0 PREFETCH_INST 2 cbnz x3, MterpException // bail out .if 0 SET_VREG_OBJECT w0, w2 // fp[AA]<- w0 .else SET_VREG w0, w2 // fp[AA]<- w0 .endif ADVANCE 2 GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip /* ------------------------------ */ .balign 128 .L_op_sget_char: /* 0x65 */ /* File: arm64/op_sget_char.S */ /* File: arm64/op_sget.S */ /* * General SGET handler wrapper. * * for: sget, sget-object, sget-boolean, sget-byte, sget-char, sget-short */ /* op vAA, field//BBBB */ .extern artGetCharStaticFromCode EXPORT_PC FETCH w0, 1 // w0<- field ref BBBB ldr x1, [xFP, #OFF_FP_METHOD] mov x2, xSELF bl artGetCharStaticFromCode ldr x3, [xSELF, #THREAD_EXCEPTION_OFFSET] lsr w2, wINST, #8 // w2<- AA uxth w0, w0 PREFETCH_INST 2 cbnz x3, MterpException // bail out .if 0 SET_VREG_OBJECT w0, w2 // fp[AA]<- w0 .else SET_VREG w0, w2 // fp[AA]<- w0 .endif ADVANCE 2 GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip /* ------------------------------ */ .balign 128 .L_op_sget_short: /* 0x66 */ /* File: arm64/op_sget_short.S */ /* File: arm64/op_sget.S */ /* * General SGET handler wrapper. * * for: sget, sget-object, sget-boolean, sget-byte, sget-char, sget-short */ /* op vAA, field//BBBB */ .extern artGetShortStaticFromCode EXPORT_PC FETCH w0, 1 // w0<- field ref BBBB ldr x1, [xFP, #OFF_FP_METHOD] mov x2, xSELF bl artGetShortStaticFromCode ldr x3, [xSELF, #THREAD_EXCEPTION_OFFSET] lsr w2, wINST, #8 // w2<- AA sxth w0, w0 PREFETCH_INST 2 cbnz x3, MterpException // bail out .if 0 SET_VREG_OBJECT w0, w2 // fp[AA]<- w0 .else SET_VREG w0, w2 // fp[AA]<- w0 .endif ADVANCE 2 GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip /* ------------------------------ */ .balign 128 .L_op_sput: /* 0x67 */ /* File: arm64/op_sput.S */ /* * General SPUT handler wrapper. * * for: sput, sput-boolean, sput-byte, sput-char, sput-short */ /* op vAA, field//BBBB */ EXPORT_PC FETCH w0, 1 // r0<- field ref BBBB lsr w3, wINST, #8 // r3<- AA GET_VREG w1, w3 // r1<= fp[AA] ldr x2, [xFP, #OFF_FP_METHOD] mov x3, xSELF PREFETCH_INST 2 // Get next inst, but don't advance rPC bl artSet32StaticFromCode cbnz w0, MterpException // 0 on success ADVANCE 2 // Past exception point - now advance rPC GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_sput_wide: /* 0x68 */ /* File: arm64/op_sput_wide.S */ /* * SPUT_WIDE handler wrapper. * */ /* sput-wide vAA, field//BBBB */ .extern artSet64IndirectStaticFromMterp EXPORT_PC FETCH w0, 1 // w0<- field ref BBBB ldr x1, [xFP, #OFF_FP_METHOD] lsr w2, wINST, #8 // w3<- AA VREG_INDEX_TO_ADDR x2, w2 mov x3, xSELF PREFETCH_INST 2 // Get next inst, but don't advance rPC bl artSet64IndirectStaticFromMterp cbnz w0, MterpException // 0 on success, -1 on failure ADVANCE 2 // Past exception point - now advance rPC GET_INST_OPCODE ip // extract opcode from wINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_sput_object: /* 0x69 */ /* File: arm64/op_sput_object.S */ EXPORT_PC add x0, xFP, #OFF_FP_SHADOWFRAME mov x1, xPC mov x2, xINST mov x3, xSELF bl MterpSputObject cbz w0, MterpException FETCH_ADVANCE_INST 2 // advance rPC, load rINST GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_sput_boolean: /* 0x6a */ /* File: arm64/op_sput_boolean.S */ /* File: arm64/op_sput.S */ /* * General SPUT handler wrapper. * * for: sput, sput-boolean, sput-byte, sput-char, sput-short */ /* op vAA, field//BBBB */ EXPORT_PC FETCH w0, 1 // r0<- field ref BBBB lsr w3, wINST, #8 // r3<- AA GET_VREG w1, w3 // r1<= fp[AA] ldr x2, [xFP, #OFF_FP_METHOD] mov x3, xSELF PREFETCH_INST 2 // Get next inst, but don't advance rPC bl artSet8StaticFromCode cbnz w0, MterpException // 0 on success ADVANCE 2 // Past exception point - now advance rPC GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_sput_byte: /* 0x6b */ /* File: arm64/op_sput_byte.S */ /* File: arm64/op_sput.S */ /* * General SPUT handler wrapper. * * for: sput, sput-boolean, sput-byte, sput-char, sput-short */ /* op vAA, field//BBBB */ EXPORT_PC FETCH w0, 1 // r0<- field ref BBBB lsr w3, wINST, #8 // r3<- AA GET_VREG w1, w3 // r1<= fp[AA] ldr x2, [xFP, #OFF_FP_METHOD] mov x3, xSELF PREFETCH_INST 2 // Get next inst, but don't advance rPC bl artSet8StaticFromCode cbnz w0, MterpException // 0 on success ADVANCE 2 // Past exception point - now advance rPC GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_sput_char: /* 0x6c */ /* File: arm64/op_sput_char.S */ /* File: arm64/op_sput.S */ /* * General SPUT handler wrapper. * * for: sput, sput-boolean, sput-byte, sput-char, sput-short */ /* op vAA, field//BBBB */ EXPORT_PC FETCH w0, 1 // r0<- field ref BBBB lsr w3, wINST, #8 // r3<- AA GET_VREG w1, w3 // r1<= fp[AA] ldr x2, [xFP, #OFF_FP_METHOD] mov x3, xSELF PREFETCH_INST 2 // Get next inst, but don't advance rPC bl artSet16StaticFromCode cbnz w0, MterpException // 0 on success ADVANCE 2 // Past exception point - now advance rPC GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_sput_short: /* 0x6d */ /* File: arm64/op_sput_short.S */ /* File: arm64/op_sput.S */ /* * General SPUT handler wrapper. * * for: sput, sput-boolean, sput-byte, sput-char, sput-short */ /* op vAA, field//BBBB */ EXPORT_PC FETCH w0, 1 // r0<- field ref BBBB lsr w3, wINST, #8 // r3<- AA GET_VREG w1, w3 // r1<= fp[AA] ldr x2, [xFP, #OFF_FP_METHOD] mov x3, xSELF PREFETCH_INST 2 // Get next inst, but don't advance rPC bl artSet16StaticFromCode cbnz w0, MterpException // 0 on success ADVANCE 2 // Past exception point - now advance rPC GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_invoke_virtual: /* 0x6e */ /* File: arm64/op_invoke_virtual.S */ /* File: arm64/invoke.S */ /* * Generic invoke handler wrapper. */ /* op vB, {vD, vE, vF, vG, vA}, class@CCCC */ /* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */ .extern MterpInvokeVirtual EXPORT_PC mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME mov x2, xPC mov x3, xINST bl MterpInvokeVirtual cbz w0, MterpException FETCH_ADVANCE_INST 3 bl MterpShouldSwitchInterpreters cbnz w0, MterpFallback GET_INST_OPCODE ip GOTO_OPCODE ip /* * Handle a virtual method call. * * for: invoke-virtual, invoke-virtual/range */ /* op vB, {vD, vE, vF, vG, vA}, class@CCCC */ /* op vAA, {vCCCC..v(CCCC+AA-1)}, meth@BBBB */ /* ------------------------------ */ .balign 128 .L_op_invoke_super: /* 0x6f */ /* File: arm64/op_invoke_super.S */ /* File: arm64/invoke.S */ /* * Generic invoke handler wrapper. */ /* op vB, {vD, vE, vF, vG, vA}, class@CCCC */ /* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */ .extern MterpInvokeSuper EXPORT_PC mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME mov x2, xPC mov x3, xINST bl MterpInvokeSuper cbz w0, MterpException FETCH_ADVANCE_INST 3 bl MterpShouldSwitchInterpreters cbnz w0, MterpFallback GET_INST_OPCODE ip GOTO_OPCODE ip /* * Handle a "super" method call. * * for: invoke-super, invoke-super/range */ /* op vB, {vD, vE, vF, vG, vA}, class@CCCC */ /* op vAA, {vCCCC..v(CCCC+AA-1)}, meth@BBBB */ /* ------------------------------ */ .balign 128 .L_op_invoke_direct: /* 0x70 */ /* File: arm64/op_invoke_direct.S */ /* File: arm64/invoke.S */ /* * Generic invoke handler wrapper. */ /* op vB, {vD, vE, vF, vG, vA}, class@CCCC */ /* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */ .extern MterpInvokeDirect EXPORT_PC mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME mov x2, xPC mov x3, xINST bl MterpInvokeDirect cbz w0, MterpException FETCH_ADVANCE_INST 3 bl MterpShouldSwitchInterpreters cbnz w0, MterpFallback GET_INST_OPCODE ip GOTO_OPCODE ip /* ------------------------------ */ .balign 128 .L_op_invoke_static: /* 0x71 */ /* File: arm64/op_invoke_static.S */ /* File: arm64/invoke.S */ /* * Generic invoke handler wrapper. */ /* op vB, {vD, vE, vF, vG, vA}, class@CCCC */ /* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */ .extern MterpInvokeStatic EXPORT_PC mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME mov x2, xPC mov x3, xINST bl MterpInvokeStatic cbz w0, MterpException FETCH_ADVANCE_INST 3 bl MterpShouldSwitchInterpreters cbnz w0, MterpFallback GET_INST_OPCODE ip GOTO_OPCODE ip /* ------------------------------ */ .balign 128 .L_op_invoke_interface: /* 0x72 */ /* File: arm64/op_invoke_interface.S */ /* File: arm64/invoke.S */ /* * Generic invoke handler wrapper. */ /* op vB, {vD, vE, vF, vG, vA}, class@CCCC */ /* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */ .extern MterpInvokeInterface EXPORT_PC mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME mov x2, xPC mov x3, xINST bl MterpInvokeInterface cbz w0, MterpException FETCH_ADVANCE_INST 3 bl MterpShouldSwitchInterpreters cbnz w0, MterpFallback GET_INST_OPCODE ip GOTO_OPCODE ip /* * Handle an interface method call. * * for: invoke-interface, invoke-interface/range */ /* op vB, {vD, vE, vF, vG, vA}, class@CCCC */ /* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */ /* ------------------------------ */ .balign 128 .L_op_return_void_no_barrier: /* 0x73 */ /* File: arm64/op_return_void_no_barrier.S */ ldr w7, [xSELF, #THREAD_FLAGS_OFFSET] mov x0, xSELF ands w7, w7, #(THREAD_SUSPEND_REQUEST | THREAD_CHECKPOINT_REQUEST) b.ne .Lop_return_void_no_barrier_check .Lop_return_void_no_barrier_return: mov x0, #0 b MterpReturn .Lop_return_void_no_barrier_check: bl MterpSuspendCheck // (self) b .Lop_return_void_no_barrier_return /* ------------------------------ */ .balign 128 .L_op_invoke_virtual_range: /* 0x74 */ /* File: arm64/op_invoke_virtual_range.S */ /* File: arm64/invoke.S */ /* * Generic invoke handler wrapper. */ /* op vB, {vD, vE, vF, vG, vA}, class@CCCC */ /* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */ .extern MterpInvokeVirtualRange EXPORT_PC mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME mov x2, xPC mov x3, xINST bl MterpInvokeVirtualRange cbz w0, MterpException FETCH_ADVANCE_INST 3 bl MterpShouldSwitchInterpreters cbnz w0, MterpFallback GET_INST_OPCODE ip GOTO_OPCODE ip /* ------------------------------ */ .balign 128 .L_op_invoke_super_range: /* 0x75 */ /* File: arm64/op_invoke_super_range.S */ /* File: arm64/invoke.S */ /* * Generic invoke handler wrapper. */ /* op vB, {vD, vE, vF, vG, vA}, class@CCCC */ /* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */ .extern MterpInvokeSuperRange EXPORT_PC mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME mov x2, xPC mov x3, xINST bl MterpInvokeSuperRange cbz w0, MterpException FETCH_ADVANCE_INST 3 bl MterpShouldSwitchInterpreters cbnz w0, MterpFallback GET_INST_OPCODE ip GOTO_OPCODE ip /* ------------------------------ */ .balign 128 .L_op_invoke_direct_range: /* 0x76 */ /* File: arm64/op_invoke_direct_range.S */ /* File: arm64/invoke.S */ /* * Generic invoke handler wrapper. */ /* op vB, {vD, vE, vF, vG, vA}, class@CCCC */ /* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */ .extern MterpInvokeDirectRange EXPORT_PC mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME mov x2, xPC mov x3, xINST bl MterpInvokeDirectRange cbz w0, MterpException FETCH_ADVANCE_INST 3 bl MterpShouldSwitchInterpreters cbnz w0, MterpFallback GET_INST_OPCODE ip GOTO_OPCODE ip /* ------------------------------ */ .balign 128 .L_op_invoke_static_range: /* 0x77 */ /* File: arm64/op_invoke_static_range.S */ /* File: arm64/invoke.S */ /* * Generic invoke handler wrapper. */ /* op vB, {vD, vE, vF, vG, vA}, class@CCCC */ /* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */ .extern MterpInvokeStaticRange EXPORT_PC mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME mov x2, xPC mov x3, xINST bl MterpInvokeStaticRange cbz w0, MterpException FETCH_ADVANCE_INST 3 bl MterpShouldSwitchInterpreters cbnz w0, MterpFallback GET_INST_OPCODE ip GOTO_OPCODE ip /* ------------------------------ */ .balign 128 .L_op_invoke_interface_range: /* 0x78 */ /* File: arm64/op_invoke_interface_range.S */ /* File: arm64/invoke.S */ /* * Generic invoke handler wrapper. */ /* op vB, {vD, vE, vF, vG, vA}, class@CCCC */ /* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */ .extern MterpInvokeInterfaceRange EXPORT_PC mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME mov x2, xPC mov x3, xINST bl MterpInvokeInterfaceRange cbz w0, MterpException FETCH_ADVANCE_INST 3 bl MterpShouldSwitchInterpreters cbnz w0, MterpFallback GET_INST_OPCODE ip GOTO_OPCODE ip /* ------------------------------ */ .balign 128 .L_op_unused_79: /* 0x79 */ /* File: arm64/op_unused_79.S */ /* File: arm64/unused.S */ /* * Bail to reference interpreter to throw. */ b MterpFallback /* ------------------------------ */ .balign 128 .L_op_unused_7a: /* 0x7a */ /* File: arm64/op_unused_7a.S */ /* File: arm64/unused.S */ /* * Bail to reference interpreter to throw. */ b MterpFallback /* ------------------------------ */ .balign 128 .L_op_neg_int: /* 0x7b */ /* File: arm64/op_neg_int.S */ /* File: arm64/unop.S */ /* * Generic 32-bit unary operation. Provide an "instr" line that * specifies an instruction that performs "result = op w0". * This could be an ARM instruction or a function call. * * for: neg-int, not-int, neg-float, int-to-float, float-to-int, * int-to-byte, int-to-char, int-to-short */ /* unop vA, vB */ lsr w3, wINST, #12 // w3<- B GET_VREG w0, w3 // w0<- vB ubfx w9, wINST, #8, #4 // w9<- A // optional op; may set condition codes FETCH_ADVANCE_INST 1 // advance rPC, load rINST sub w0, wzr, w0 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 8-9 instructions */ /* ------------------------------ */ .balign 128 .L_op_not_int: /* 0x7c */ /* File: arm64/op_not_int.S */ /* File: arm64/unop.S */ /* * Generic 32-bit unary operation. Provide an "instr" line that * specifies an instruction that performs "result = op w0". * This could be an ARM instruction or a function call. * * for: neg-int, not-int, neg-float, int-to-float, float-to-int, * int-to-byte, int-to-char, int-to-short */ /* unop vA, vB */ lsr w3, wINST, #12 // w3<- B GET_VREG w0, w3 // w0<- vB ubfx w9, wINST, #8, #4 // w9<- A // optional op; may set condition codes FETCH_ADVANCE_INST 1 // advance rPC, load rINST mvn w0, w0 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 8-9 instructions */ /* ------------------------------ */ .balign 128 .L_op_neg_long: /* 0x7d */ /* File: arm64/op_neg_long.S */ /* File: arm64/unopWide.S */ /* * Generic 64-bit unary operation. Provide an "instr" line that * specifies an instruction that performs "result = op x0". * * For: neg-long, not-long */ /* unop vA, vB */ lsr w3, wINST, #12 // w3<- B ubfx w4, wINST, #8, #4 // w4<- A GET_VREG_WIDE x0, w3 FETCH_ADVANCE_INST 1 // advance rPC, load wINST sub x0, xzr, x0 GET_INST_OPCODE ip // extract opcode from wINST SET_VREG_WIDE x0, w4 GOTO_OPCODE ip // jump to next instruction /* 10-11 instructions */ /* ------------------------------ */ .balign 128 .L_op_not_long: /* 0x7e */ /* File: arm64/op_not_long.S */ /* File: arm64/unopWide.S */ /* * Generic 64-bit unary operation. Provide an "instr" line that * specifies an instruction that performs "result = op x0". * * For: neg-long, not-long */ /* unop vA, vB */ lsr w3, wINST, #12 // w3<- B ubfx w4, wINST, #8, #4 // w4<- A GET_VREG_WIDE x0, w3 FETCH_ADVANCE_INST 1 // advance rPC, load wINST mvn x0, x0 GET_INST_OPCODE ip // extract opcode from wINST SET_VREG_WIDE x0, w4 GOTO_OPCODE ip // jump to next instruction /* 10-11 instructions */ /* ------------------------------ */ .balign 128 .L_op_neg_float: /* 0x7f */ /* File: arm64/op_neg_float.S */ /* File: arm64/unop.S */ /* * Generic 32-bit unary operation. Provide an "instr" line that * specifies an instruction that performs "result = op w0". * This could be an ARM instruction or a function call. * * for: neg-int, not-int, neg-float, int-to-float, float-to-int, * int-to-byte, int-to-char, int-to-short */ /* unop vA, vB */ lsr w3, wINST, #12 // w3<- B GET_VREG w0, w3 // w0<- vB ubfx w9, wINST, #8, #4 // w9<- A mov w4, #0x80000000 // optional op; may set condition codes FETCH_ADVANCE_INST 1 // advance rPC, load rINST add w0, w0, w4 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 8-9 instructions */ /* ------------------------------ */ .balign 128 .L_op_neg_double: /* 0x80 */ /* File: arm64/op_neg_double.S */ /* File: arm64/unopWide.S */ /* * Generic 64-bit unary operation. Provide an "instr" line that * specifies an instruction that performs "result = op x0". * * For: neg-long, not-long */ /* unop vA, vB */ lsr w3, wINST, #12 // w3<- B ubfx w4, wINST, #8, #4 // w4<- A GET_VREG_WIDE x0, w3 FETCH_ADVANCE_INST 1 // advance rPC, load wINST mov x1, #0x8000000000000000 add x0, x0, x1 GET_INST_OPCODE ip // extract opcode from wINST SET_VREG_WIDE x0, w4 GOTO_OPCODE ip // jump to next instruction /* 10-11 instructions */ /* ------------------------------ */ .balign 128 .L_op_int_to_long: /* 0x81 */ /* File: arm64/op_int_to_long.S */ /* File: arm64/funopWider.S */ /* * Generic 32bit-to-64bit floating point unary operation. Provide an * "instr" line that specifies an instruction that performs "x0 = op w0". * * For: int-to-double, float-to-double, float-to-long */ /* unop vA, vB */ lsr w3, wINST, #12 // w3<- B lsr w4, wINST, #8 // w4<- A+ GET_VREG w0, w3 FETCH_ADVANCE_INST 1 // advance rPC, load wINST and w4, w4, #15 // w4<- A sbfm x0, x0, 0, 31 // d0<- op GET_INST_OPCODE ip // extract opcode from wINST SET_VREG_WIDE x0, w4 // vA<- d0 GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_int_to_float: /* 0x82 */ /* File: arm64/op_int_to_float.S */ /* File: arm64/funopNarrow.S */ /* * Generic 32bit-to-32bit floating point unary operation. Provide an * "instr" line that specifies an instruction that performs "s0 = op w0". * * For: int-to-float, float-to-int * TODO: refactor all of the conversions - parameterize width and use same template. */ /* unop vA, vB */ lsr w3, wINST, #12 // w3<- B lsr w4, wINST, #8 // w4<- A+ GET_VREG w0, w3 FETCH_ADVANCE_INST 1 // advance rPC, load wINST and w4, w4, #15 // w4<- A scvtf s0, w0 // d0<- op GET_INST_OPCODE ip // extract opcode from wINST SET_VREG s0, w4 // vA<- d0 GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_int_to_double: /* 0x83 */ /* File: arm64/op_int_to_double.S */ /* File: arm64/funopWider.S */ /* * Generic 32bit-to-64bit floating point unary operation. Provide an * "instr" line that specifies an instruction that performs "d0 = op w0". * * For: int-to-double, float-to-double, float-to-long */ /* unop vA, vB */ lsr w3, wINST, #12 // w3<- B lsr w4, wINST, #8 // w4<- A+ GET_VREG w0, w3 FETCH_ADVANCE_INST 1 // advance rPC, load wINST and w4, w4, #15 // w4<- A scvtf d0, w0 // d0<- op GET_INST_OPCODE ip // extract opcode from wINST SET_VREG_WIDE d0, w4 // vA<- d0 GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_long_to_int: /* 0x84 */ /* File: arm64/op_long_to_int.S */ /* File: arm64/funopNarrower.S */ /* * Generic 64bit-to-32bit floating point unary operation. Provide an * "instr" line that specifies an instruction that performs "w0 = op x0". * * For: int-to-double, float-to-double, float-to-long */ /* unop vA, vB */ lsr w3, wINST, #12 // w3<- B lsr w4, wINST, #8 // w4<- A+ GET_VREG_WIDE x0, w3 FETCH_ADVANCE_INST 1 // advance rPC, load wINST and w4, w4, #15 // w4<- A // d0<- op GET_INST_OPCODE ip // extract opcode from wINST SET_VREG w0, w4 // vA<- d0 GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_long_to_float: /* 0x85 */ /* File: arm64/op_long_to_float.S */ /* File: arm64/funopNarrower.S */ /* * Generic 64bit-to-32bit floating point unary operation. Provide an * "instr" line that specifies an instruction that performs "s0 = op x0". * * For: int-to-double, float-to-double, float-to-long */ /* unop vA, vB */ lsr w3, wINST, #12 // w3<- B lsr w4, wINST, #8 // w4<- A+ GET_VREG_WIDE x0, w3 FETCH_ADVANCE_INST 1 // advance rPC, load wINST and w4, w4, #15 // w4<- A scvtf s0, x0 // d0<- op GET_INST_OPCODE ip // extract opcode from wINST SET_VREG s0, w4 // vA<- d0 GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_long_to_double: /* 0x86 */ /* File: arm64/op_long_to_double.S */ /* File: arm64/funopWide.S */ /* * Generic 64bit-to-64bit floating point unary operation. Provide an * "instr" line that specifies an instruction that performs "d0 = op x0". * * For: long-to-double, double-to-long */ /* unop vA, vB */ lsr w3, wINST, #12 // w3<- B lsr w4, wINST, #8 // w4<- A+ GET_VREG_WIDE x0, w3 FETCH_ADVANCE_INST 1 // advance rPC, load wINST and w4, w4, #15 // w4<- A scvtf d0, x0 // d0<- op GET_INST_OPCODE ip // extract opcode from wINST SET_VREG_WIDE d0, w4 // vA<- d0 GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_float_to_int: /* 0x87 */ /* File: arm64/op_float_to_int.S */ /* File: arm64/funopNarrow.S */ /* * Generic 32bit-to-32bit floating point unary operation. Provide an * "instr" line that specifies an instruction that performs "w0 = op s0". * * For: int-to-float, float-to-int * TODO: refactor all of the conversions - parameterize width and use same template. */ /* unop vA, vB */ lsr w3, wINST, #12 // w3<- B lsr w4, wINST, #8 // w4<- A+ GET_VREG s0, w3 FETCH_ADVANCE_INST 1 // advance rPC, load wINST and w4, w4, #15 // w4<- A fcvtzs w0, s0 // d0<- op GET_INST_OPCODE ip // extract opcode from wINST SET_VREG w0, w4 // vA<- d0 GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_float_to_long: /* 0x88 */ /* File: arm64/op_float_to_long.S */ /* File: arm64/funopWider.S */ /* * Generic 32bit-to-64bit floating point unary operation. Provide an * "instr" line that specifies an instruction that performs "x0 = op s0". * * For: int-to-double, float-to-double, float-to-long */ /* unop vA, vB */ lsr w3, wINST, #12 // w3<- B lsr w4, wINST, #8 // w4<- A+ GET_VREG s0, w3 FETCH_ADVANCE_INST 1 // advance rPC, load wINST and w4, w4, #15 // w4<- A fcvtzs x0, s0 // d0<- op GET_INST_OPCODE ip // extract opcode from wINST SET_VREG_WIDE x0, w4 // vA<- d0 GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_float_to_double: /* 0x89 */ /* File: arm64/op_float_to_double.S */ /* File: arm64/funopWider.S */ /* * Generic 32bit-to-64bit floating point unary operation. Provide an * "instr" line that specifies an instruction that performs "d0 = op s0". * * For: int-to-double, float-to-double, float-to-long */ /* unop vA, vB */ lsr w3, wINST, #12 // w3<- B lsr w4, wINST, #8 // w4<- A+ GET_VREG s0, w3 FETCH_ADVANCE_INST 1 // advance rPC, load wINST and w4, w4, #15 // w4<- A fcvt d0, s0 // d0<- op GET_INST_OPCODE ip // extract opcode from wINST SET_VREG_WIDE d0, w4 // vA<- d0 GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_double_to_int: /* 0x8a */ /* File: arm64/op_double_to_int.S */ /* File: arm64/funopNarrower.S */ /* * Generic 64bit-to-32bit floating point unary operation. Provide an * "instr" line that specifies an instruction that performs "w0 = op d0". * * For: int-to-double, float-to-double, float-to-long */ /* unop vA, vB */ lsr w3, wINST, #12 // w3<- B lsr w4, wINST, #8 // w4<- A+ GET_VREG_WIDE d0, w3 FETCH_ADVANCE_INST 1 // advance rPC, load wINST and w4, w4, #15 // w4<- A fcvtzs w0, d0 // d0<- op GET_INST_OPCODE ip // extract opcode from wINST SET_VREG w0, w4 // vA<- d0 GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_double_to_long: /* 0x8b */ /* File: arm64/op_double_to_long.S */ /* File: arm64/funopWide.S */ /* * Generic 64bit-to-64bit floating point unary operation. Provide an * "instr" line that specifies an instruction that performs "x0 = op d0". * * For: long-to-double, double-to-long */ /* unop vA, vB */ lsr w3, wINST, #12 // w3<- B lsr w4, wINST, #8 // w4<- A+ GET_VREG_WIDE d0, w3 FETCH_ADVANCE_INST 1 // advance rPC, load wINST and w4, w4, #15 // w4<- A fcvtzs x0, d0 // d0<- op GET_INST_OPCODE ip // extract opcode from wINST SET_VREG_WIDE x0, w4 // vA<- d0 GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_double_to_float: /* 0x8c */ /* File: arm64/op_double_to_float.S */ /* File: arm64/funopNarrower.S */ /* * Generic 64bit-to-32bit floating point unary operation. Provide an * "instr" line that specifies an instruction that performs "s0 = op d0". * * For: int-to-double, float-to-double, float-to-long */ /* unop vA, vB */ lsr w3, wINST, #12 // w3<- B lsr w4, wINST, #8 // w4<- A+ GET_VREG_WIDE d0, w3 FETCH_ADVANCE_INST 1 // advance rPC, load wINST and w4, w4, #15 // w4<- A fcvt s0, d0 // d0<- op GET_INST_OPCODE ip // extract opcode from wINST SET_VREG s0, w4 // vA<- d0 GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_int_to_byte: /* 0x8d */ /* File: arm64/op_int_to_byte.S */ /* File: arm64/unop.S */ /* * Generic 32-bit unary operation. Provide an "instr" line that * specifies an instruction that performs "result = op w0". * This could be an ARM instruction or a function call. * * for: neg-int, not-int, neg-float, int-to-float, float-to-int, * int-to-byte, int-to-char, int-to-short */ /* unop vA, vB */ lsr w3, wINST, #12 // w3<- B GET_VREG w0, w3 // w0<- vB ubfx w9, wINST, #8, #4 // w9<- A // optional op; may set condition codes FETCH_ADVANCE_INST 1 // advance rPC, load rINST sxtb w0, w0 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 8-9 instructions */ /* ------------------------------ */ .balign 128 .L_op_int_to_char: /* 0x8e */ /* File: arm64/op_int_to_char.S */ /* File: arm64/unop.S */ /* * Generic 32-bit unary operation. Provide an "instr" line that * specifies an instruction that performs "result = op w0". * This could be an ARM instruction or a function call. * * for: neg-int, not-int, neg-float, int-to-float, float-to-int, * int-to-byte, int-to-char, int-to-short */ /* unop vA, vB */ lsr w3, wINST, #12 // w3<- B GET_VREG w0, w3 // w0<- vB ubfx w9, wINST, #8, #4 // w9<- A // optional op; may set condition codes FETCH_ADVANCE_INST 1 // advance rPC, load rINST uxth w0, w0 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 8-9 instructions */ /* ------------------------------ */ .balign 128 .L_op_int_to_short: /* 0x8f */ /* File: arm64/op_int_to_short.S */ /* File: arm64/unop.S */ /* * Generic 32-bit unary operation. Provide an "instr" line that * specifies an instruction that performs "result = op w0". * This could be an ARM instruction or a function call. * * for: neg-int, not-int, neg-float, int-to-float, float-to-int, * int-to-byte, int-to-char, int-to-short */ /* unop vA, vB */ lsr w3, wINST, #12 // w3<- B GET_VREG w0, w3 // w0<- vB ubfx w9, wINST, #8, #4 // w9<- A // optional op; may set condition codes FETCH_ADVANCE_INST 1 // advance rPC, load rINST sxth w0, w0 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 8-9 instructions */ /* ------------------------------ */ .balign 128 .L_op_add_int: /* 0x90 */ /* File: arm64/op_add_int.S */ /* File: arm64/binop.S */ /* * Generic 32-bit binary operation. Provide an "instr" line that * specifies an instruction that performs "result = w0 op w1". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than w0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. Note that we * *don't* check for (INT_MIN / -1) here, because the ARM math lib * handles it correctly. * * For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int, * xor-int, shl-int, shr-int, ushr-int, add-float, sub-float, * mul-float, div-float, rem-float */ /* binop vAA, vBB, vCC */ FETCH w0, 1 // w0<- CCBB lsr w9, wINST, #8 // w9<- AA lsr w3, w0, #8 // w3<- CC and w2, w0, #255 // w2<- BB GET_VREG w1, w3 // w1<- vCC GET_VREG w0, w2 // w0<- vBB .if 0 cbz w1, common_errDivideByZero // is second operand zero? .endif FETCH_ADVANCE_INST 2 // advance rPC, load rINST // optional op; may set condition codes add w0, w0, w1 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 11-14 instructions */ /* ------------------------------ */ .balign 128 .L_op_sub_int: /* 0x91 */ /* File: arm64/op_sub_int.S */ /* File: arm64/binop.S */ /* * Generic 32-bit binary operation. Provide an "instr" line that * specifies an instruction that performs "result = w0 op w1". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than w0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. Note that we * *don't* check for (INT_MIN / -1) here, because the ARM math lib * handles it correctly. * * For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int, * xor-int, shl-int, shr-int, ushr-int, add-float, sub-float, * mul-float, div-float, rem-float */ /* binop vAA, vBB, vCC */ FETCH w0, 1 // w0<- CCBB lsr w9, wINST, #8 // w9<- AA lsr w3, w0, #8 // w3<- CC and w2, w0, #255 // w2<- BB GET_VREG w1, w3 // w1<- vCC GET_VREG w0, w2 // w0<- vBB .if 0 cbz w1, common_errDivideByZero // is second operand zero? .endif FETCH_ADVANCE_INST 2 // advance rPC, load rINST // optional op; may set condition codes sub w0, w0, w1 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 11-14 instructions */ /* ------------------------------ */ .balign 128 .L_op_mul_int: /* 0x92 */ /* File: arm64/op_mul_int.S */ /* must be "mul w0, w1, w0" -- "w0, w0, w1" is illegal */ /* File: arm64/binop.S */ /* * Generic 32-bit binary operation. Provide an "instr" line that * specifies an instruction that performs "result = w0 op w1". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than w0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. Note that we * *don't* check for (INT_MIN / -1) here, because the ARM math lib * handles it correctly. * * For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int, * xor-int, shl-int, shr-int, ushr-int, add-float, sub-float, * mul-float, div-float, rem-float */ /* binop vAA, vBB, vCC */ FETCH w0, 1 // w0<- CCBB lsr w9, wINST, #8 // w9<- AA lsr w3, w0, #8 // w3<- CC and w2, w0, #255 // w2<- BB GET_VREG w1, w3 // w1<- vCC GET_VREG w0, w2 // w0<- vBB .if 0 cbz w1, common_errDivideByZero // is second operand zero? .endif FETCH_ADVANCE_INST 2 // advance rPC, load rINST // optional op; may set condition codes mul w0, w1, w0 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 11-14 instructions */ /* ------------------------------ */ .balign 128 .L_op_div_int: /* 0x93 */ /* File: arm64/op_div_int.S */ /* File: arm64/binop.S */ /* * Generic 32-bit binary operation. Provide an "instr" line that * specifies an instruction that performs "result = w0 op w1". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than w0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. Note that we * *don't* check for (INT_MIN / -1) here, because the ARM math lib * handles it correctly. * * For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int, * xor-int, shl-int, shr-int, ushr-int, add-float, sub-float, * mul-float, div-float, rem-float */ /* binop vAA, vBB, vCC */ FETCH w0, 1 // w0<- CCBB lsr w9, wINST, #8 // w9<- AA lsr w3, w0, #8 // w3<- CC and w2, w0, #255 // w2<- BB GET_VREG w1, w3 // w1<- vCC GET_VREG w0, w2 // w0<- vBB .if 1 cbz w1, common_errDivideByZero // is second operand zero? .endif FETCH_ADVANCE_INST 2 // advance rPC, load rINST // optional op; may set condition codes sdiv w0, w0, w1 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 11-14 instructions */ /* ------------------------------ */ .balign 128 .L_op_rem_int: /* 0x94 */ /* File: arm64/op_rem_int.S */ /* File: arm64/binop.S */ /* * Generic 32-bit binary operation. Provide an "instr" line that * specifies an instruction that performs "result = w0 op w1". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than w0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. Note that we * *don't* check for (INT_MIN / -1) here, because the ARM math lib * handles it correctly. * * For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int, * xor-int, shl-int, shr-int, ushr-int, add-float, sub-float, * mul-float, div-float, rem-float */ /* binop vAA, vBB, vCC */ FETCH w0, 1 // w0<- CCBB lsr w9, wINST, #8 // w9<- AA lsr w3, w0, #8 // w3<- CC and w2, w0, #255 // w2<- BB GET_VREG w1, w3 // w1<- vCC GET_VREG w0, w2 // w0<- vBB .if 1 cbz w1, common_errDivideByZero // is second operand zero? .endif FETCH_ADVANCE_INST 2 // advance rPC, load rINST sdiv w2, w0, w1 // optional op; may set condition codes msub w0, w2, w1, w0 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 11-14 instructions */ /* ------------------------------ */ .balign 128 .L_op_and_int: /* 0x95 */ /* File: arm64/op_and_int.S */ /* File: arm64/binop.S */ /* * Generic 32-bit binary operation. Provide an "instr" line that * specifies an instruction that performs "result = w0 op w1". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than w0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. Note that we * *don't* check for (INT_MIN / -1) here, because the ARM math lib * handles it correctly. * * For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int, * xor-int, shl-int, shr-int, ushr-int, add-float, sub-float, * mul-float, div-float, rem-float */ /* binop vAA, vBB, vCC */ FETCH w0, 1 // w0<- CCBB lsr w9, wINST, #8 // w9<- AA lsr w3, w0, #8 // w3<- CC and w2, w0, #255 // w2<- BB GET_VREG w1, w3 // w1<- vCC GET_VREG w0, w2 // w0<- vBB .if 0 cbz w1, common_errDivideByZero // is second operand zero? .endif FETCH_ADVANCE_INST 2 // advance rPC, load rINST // optional op; may set condition codes and w0, w0, w1 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 11-14 instructions */ /* ------------------------------ */ .balign 128 .L_op_or_int: /* 0x96 */ /* File: arm64/op_or_int.S */ /* File: arm64/binop.S */ /* * Generic 32-bit binary operation. Provide an "instr" line that * specifies an instruction that performs "result = w0 op w1". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than w0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. Note that we * *don't* check for (INT_MIN / -1) here, because the ARM math lib * handles it correctly. * * For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int, * xor-int, shl-int, shr-int, ushr-int, add-float, sub-float, * mul-float, div-float, rem-float */ /* binop vAA, vBB, vCC */ FETCH w0, 1 // w0<- CCBB lsr w9, wINST, #8 // w9<- AA lsr w3, w0, #8 // w3<- CC and w2, w0, #255 // w2<- BB GET_VREG w1, w3 // w1<- vCC GET_VREG w0, w2 // w0<- vBB .if 0 cbz w1, common_errDivideByZero // is second operand zero? .endif FETCH_ADVANCE_INST 2 // advance rPC, load rINST // optional op; may set condition codes orr w0, w0, w1 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 11-14 instructions */ /* ------------------------------ */ .balign 128 .L_op_xor_int: /* 0x97 */ /* File: arm64/op_xor_int.S */ /* File: arm64/binop.S */ /* * Generic 32-bit binary operation. Provide an "instr" line that * specifies an instruction that performs "result = w0 op w1". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than w0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. Note that we * *don't* check for (INT_MIN / -1) here, because the ARM math lib * handles it correctly. * * For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int, * xor-int, shl-int, shr-int, ushr-int, add-float, sub-float, * mul-float, div-float, rem-float */ /* binop vAA, vBB, vCC */ FETCH w0, 1 // w0<- CCBB lsr w9, wINST, #8 // w9<- AA lsr w3, w0, #8 // w3<- CC and w2, w0, #255 // w2<- BB GET_VREG w1, w3 // w1<- vCC GET_VREG w0, w2 // w0<- vBB .if 0 cbz w1, common_errDivideByZero // is second operand zero? .endif FETCH_ADVANCE_INST 2 // advance rPC, load rINST // optional op; may set condition codes eor w0, w0, w1 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 11-14 instructions */ /* ------------------------------ */ .balign 128 .L_op_shl_int: /* 0x98 */ /* File: arm64/op_shl_int.S */ /* File: arm64/binop.S */ /* * Generic 32-bit binary operation. Provide an "instr" line that * specifies an instruction that performs "result = w0 op w1". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than w0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. Note that we * *don't* check for (INT_MIN / -1) here, because the ARM math lib * handles it correctly. * * For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int, * xor-int, shl-int, shr-int, ushr-int, add-float, sub-float, * mul-float, div-float, rem-float */ /* binop vAA, vBB, vCC */ FETCH w0, 1 // w0<- CCBB lsr w9, wINST, #8 // w9<- AA lsr w3, w0, #8 // w3<- CC and w2, w0, #255 // w2<- BB GET_VREG w1, w3 // w1<- vCC GET_VREG w0, w2 // w0<- vBB .if 0 cbz w1, common_errDivideByZero // is second operand zero? .endif FETCH_ADVANCE_INST 2 // advance rPC, load rINST and w1, w1, #31 // optional op; may set condition codes lsl w0, w0, w1 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 11-14 instructions */ /* ------------------------------ */ .balign 128 .L_op_shr_int: /* 0x99 */ /* File: arm64/op_shr_int.S */ /* File: arm64/binop.S */ /* * Generic 32-bit binary operation. Provide an "instr" line that * specifies an instruction that performs "result = w0 op w1". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than w0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. Note that we * *don't* check for (INT_MIN / -1) here, because the ARM math lib * handles it correctly. * * For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int, * xor-int, shl-int, shr-int, ushr-int, add-float, sub-float, * mul-float, div-float, rem-float */ /* binop vAA, vBB, vCC */ FETCH w0, 1 // w0<- CCBB lsr w9, wINST, #8 // w9<- AA lsr w3, w0, #8 // w3<- CC and w2, w0, #255 // w2<- BB GET_VREG w1, w3 // w1<- vCC GET_VREG w0, w2 // w0<- vBB .if 0 cbz w1, common_errDivideByZero // is second operand zero? .endif FETCH_ADVANCE_INST 2 // advance rPC, load rINST and w1, w1, #31 // optional op; may set condition codes asr w0, w0, w1 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 11-14 instructions */ /* ------------------------------ */ .balign 128 .L_op_ushr_int: /* 0x9a */ /* File: arm64/op_ushr_int.S */ /* File: arm64/binop.S */ /* * Generic 32-bit binary operation. Provide an "instr" line that * specifies an instruction that performs "result = w0 op w1". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than w0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. Note that we * *don't* check for (INT_MIN / -1) here, because the ARM math lib * handles it correctly. * * For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int, * xor-int, shl-int, shr-int, ushr-int, add-float, sub-float, * mul-float, div-float, rem-float */ /* binop vAA, vBB, vCC */ FETCH w0, 1 // w0<- CCBB lsr w9, wINST, #8 // w9<- AA lsr w3, w0, #8 // w3<- CC and w2, w0, #255 // w2<- BB GET_VREG w1, w3 // w1<- vCC GET_VREG w0, w2 // w0<- vBB .if 0 cbz w1, common_errDivideByZero // is second operand zero? .endif FETCH_ADVANCE_INST 2 // advance rPC, load rINST and w1, w1, #31 // optional op; may set condition codes lsr w0, w0, w1 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 11-14 instructions */ /* ------------------------------ */ .balign 128 .L_op_add_long: /* 0x9b */ /* File: arm64/op_add_long.S */ /* File: arm64/binopWide.S */ /* * Generic 64-bit binary operation. Provide an "instr" line that * specifies an instruction that performs "result = x1 op x2". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than x0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-long, sub-long, mul-long, div-long, rem-long, and-long, or-long, * xor-long, add-double, sub-double, mul-double, div-double, rem-double */ /* binop vAA, vBB, vCC */ FETCH w0, 1 // w0<- CCBB lsr w4, wINST, #8 // w4<- AA lsr w2, w0, #8 // w2<- CC and w1, w0, #255 // w1<- BB GET_VREG_WIDE x2, w2 // w2<- vCC GET_VREG_WIDE x1, w1 // w1<- vBB .if 0 cbz x2, common_errDivideByZero // is second operand zero? .endif FETCH_ADVANCE_INST 2 // advance rPC, load rINST add x0, x1, x2 // x0<- op, w0-w4 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG_WIDE x0, w4 // vAA<- x0 GOTO_OPCODE ip // jump to next instruction /* 11-14 instructions */ /* ------------------------------ */ .balign 128 .L_op_sub_long: /* 0x9c */ /* File: arm64/op_sub_long.S */ /* File: arm64/binopWide.S */ /* * Generic 64-bit binary operation. Provide an "instr" line that * specifies an instruction that performs "result = x1 op x2". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than x0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-long, sub-long, mul-long, div-long, rem-long, and-long, or-long, * xor-long, add-double, sub-double, mul-double, div-double, rem-double */ /* binop vAA, vBB, vCC */ FETCH w0, 1 // w0<- CCBB lsr w4, wINST, #8 // w4<- AA lsr w2, w0, #8 // w2<- CC and w1, w0, #255 // w1<- BB GET_VREG_WIDE x2, w2 // w2<- vCC GET_VREG_WIDE x1, w1 // w1<- vBB .if 0 cbz x2, common_errDivideByZero // is second operand zero? .endif FETCH_ADVANCE_INST 2 // advance rPC, load rINST sub x0, x1, x2 // x0<- op, w0-w4 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG_WIDE x0, w4 // vAA<- x0 GOTO_OPCODE ip // jump to next instruction /* 11-14 instructions */ /* ------------------------------ */ .balign 128 .L_op_mul_long: /* 0x9d */ /* File: arm64/op_mul_long.S */ /* File: arm64/binopWide.S */ /* * Generic 64-bit binary operation. Provide an "instr" line that * specifies an instruction that performs "result = x1 op x2". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than x0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-long, sub-long, mul-long, div-long, rem-long, and-long, or-long, * xor-long, add-double, sub-double, mul-double, div-double, rem-double */ /* binop vAA, vBB, vCC */ FETCH w0, 1 // w0<- CCBB lsr w4, wINST, #8 // w4<- AA lsr w2, w0, #8 // w2<- CC and w1, w0, #255 // w1<- BB GET_VREG_WIDE x2, w2 // w2<- vCC GET_VREG_WIDE x1, w1 // w1<- vBB .if 0 cbz x2, common_errDivideByZero // is second operand zero? .endif FETCH_ADVANCE_INST 2 // advance rPC, load rINST mul x0, x1, x2 // x0<- op, w0-w4 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG_WIDE x0, w4 // vAA<- x0 GOTO_OPCODE ip // jump to next instruction /* 11-14 instructions */ /* ------------------------------ */ .balign 128 .L_op_div_long: /* 0x9e */ /* File: arm64/op_div_long.S */ /* File: arm64/binopWide.S */ /* * Generic 64-bit binary operation. Provide an "instr" line that * specifies an instruction that performs "result = x1 op x2". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than x0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-long, sub-long, mul-long, div-long, rem-long, and-long, or-long, * xor-long, add-double, sub-double, mul-double, div-double, rem-double */ /* binop vAA, vBB, vCC */ FETCH w0, 1 // w0<- CCBB lsr w4, wINST, #8 // w4<- AA lsr w2, w0, #8 // w2<- CC and w1, w0, #255 // w1<- BB GET_VREG_WIDE x2, w2 // w2<- vCC GET_VREG_WIDE x1, w1 // w1<- vBB .if 1 cbz x2, common_errDivideByZero // is second operand zero? .endif FETCH_ADVANCE_INST 2 // advance rPC, load rINST sdiv x0, x1, x2 // x0<- op, w0-w4 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG_WIDE x0, w4 // vAA<- x0 GOTO_OPCODE ip // jump to next instruction /* 11-14 instructions */ /* ------------------------------ */ .balign 128 .L_op_rem_long: /* 0x9f */ /* File: arm64/op_rem_long.S */ /* File: arm64/binopWide.S */ /* * Generic 64-bit binary operation. Provide an "instr" line that * specifies an instruction that performs "result = x1 op x2". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than x0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-long, sub-long, mul-long, div-long, rem-long, and-long, or-long, * xor-long, add-double, sub-double, mul-double, div-double, rem-double */ /* binop vAA, vBB, vCC */ FETCH w0, 1 // w0<- CCBB lsr w4, wINST, #8 // w4<- AA lsr w2, w0, #8 // w2<- CC and w1, w0, #255 // w1<- BB GET_VREG_WIDE x2, w2 // w2<- vCC GET_VREG_WIDE x1, w1 // w1<- vBB .if 1 cbz x2, common_errDivideByZero // is second operand zero? .endif FETCH_ADVANCE_INST 2 // advance rPC, load rINST sdiv x3, x1, x2 msub x0, x3, x2, x1 // x0<- op, w0-w4 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG_WIDE x0, w4 // vAA<- x0 GOTO_OPCODE ip // jump to next instruction /* 11-14 instructions */ /* ------------------------------ */ .balign 128 .L_op_and_long: /* 0xa0 */ /* File: arm64/op_and_long.S */ /* File: arm64/binopWide.S */ /* * Generic 64-bit binary operation. Provide an "instr" line that * specifies an instruction that performs "result = x1 op x2". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than x0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-long, sub-long, mul-long, div-long, rem-long, and-long, or-long, * xor-long, add-double, sub-double, mul-double, div-double, rem-double */ /* binop vAA, vBB, vCC */ FETCH w0, 1 // w0<- CCBB lsr w4, wINST, #8 // w4<- AA lsr w2, w0, #8 // w2<- CC and w1, w0, #255 // w1<- BB GET_VREG_WIDE x2, w2 // w2<- vCC GET_VREG_WIDE x1, w1 // w1<- vBB .if 0 cbz x2, common_errDivideByZero // is second operand zero? .endif FETCH_ADVANCE_INST 2 // advance rPC, load rINST and x0, x1, x2 // x0<- op, w0-w4 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG_WIDE x0, w4 // vAA<- x0 GOTO_OPCODE ip // jump to next instruction /* 11-14 instructions */ /* ------------------------------ */ .balign 128 .L_op_or_long: /* 0xa1 */ /* File: arm64/op_or_long.S */ /* File: arm64/binopWide.S */ /* * Generic 64-bit binary operation. Provide an "instr" line that * specifies an instruction that performs "result = x1 op x2". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than x0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-long, sub-long, mul-long, div-long, rem-long, and-long, or-long, * xor-long, add-double, sub-double, mul-double, div-double, rem-double */ /* binop vAA, vBB, vCC */ FETCH w0, 1 // w0<- CCBB lsr w4, wINST, #8 // w4<- AA lsr w2, w0, #8 // w2<- CC and w1, w0, #255 // w1<- BB GET_VREG_WIDE x2, w2 // w2<- vCC GET_VREG_WIDE x1, w1 // w1<- vBB .if 0 cbz x2, common_errDivideByZero // is second operand zero? .endif FETCH_ADVANCE_INST 2 // advance rPC, load rINST orr x0, x1, x2 // x0<- op, w0-w4 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG_WIDE x0, w4 // vAA<- x0 GOTO_OPCODE ip // jump to next instruction /* 11-14 instructions */ /* ------------------------------ */ .balign 128 .L_op_xor_long: /* 0xa2 */ /* File: arm64/op_xor_long.S */ /* File: arm64/binopWide.S */ /* * Generic 64-bit binary operation. Provide an "instr" line that * specifies an instruction that performs "result = x1 op x2". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than x0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-long, sub-long, mul-long, div-long, rem-long, and-long, or-long, * xor-long, add-double, sub-double, mul-double, div-double, rem-double */ /* binop vAA, vBB, vCC */ FETCH w0, 1 // w0<- CCBB lsr w4, wINST, #8 // w4<- AA lsr w2, w0, #8 // w2<- CC and w1, w0, #255 // w1<- BB GET_VREG_WIDE x2, w2 // w2<- vCC GET_VREG_WIDE x1, w1 // w1<- vBB .if 0 cbz x2, common_errDivideByZero // is second operand zero? .endif FETCH_ADVANCE_INST 2 // advance rPC, load rINST eor x0, x1, x2 // x0<- op, w0-w4 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG_WIDE x0, w4 // vAA<- x0 GOTO_OPCODE ip // jump to next instruction /* 11-14 instructions */ /* ------------------------------ */ .balign 128 .L_op_shl_long: /* 0xa3 */ /* File: arm64/op_shl_long.S */ /* File: arm64/shiftWide.S */ /* * 64-bit shift operation. * * For: shl-long, shr-long, ushr-long */ /* binop vAA, vBB, vCC */ FETCH w0, 1 // w0<- CCBB lsr w3, wINST, #8 // w3<- AA lsr w2, w0, #8 // w2<- CC GET_VREG w2, w2 // w2<- vCC (shift count) and w1, w0, #255 // w1<- BB GET_VREG_WIDE x1, w1 // x1<- vBB FETCH_ADVANCE_INST 2 // advance rPC, load rINST and x2, x2, #63 // Mask low 6 lsl x0, x1, x2 // Do the shift. GET_INST_OPCODE ip // extract opcode from rINST SET_VREG_WIDE x0, w3 // vAA<- x0 GOTO_OPCODE ip // jump to next instruction /* 11-14 instructions */ /* ------------------------------ */ .balign 128 .L_op_shr_long: /* 0xa4 */ /* File: arm64/op_shr_long.S */ /* File: arm64/shiftWide.S */ /* * 64-bit shift operation. * * For: shl-long, shr-long, ushr-long */ /* binop vAA, vBB, vCC */ FETCH w0, 1 // w0<- CCBB lsr w3, wINST, #8 // w3<- AA lsr w2, w0, #8 // w2<- CC GET_VREG w2, w2 // w2<- vCC (shift count) and w1, w0, #255 // w1<- BB GET_VREG_WIDE x1, w1 // x1<- vBB FETCH_ADVANCE_INST 2 // advance rPC, load rINST and x2, x2, #63 // Mask low 6 asr x0, x1, x2 // Do the shift. GET_INST_OPCODE ip // extract opcode from rINST SET_VREG_WIDE x0, w3 // vAA<- x0 GOTO_OPCODE ip // jump to next instruction /* 11-14 instructions */ /* ------------------------------ */ .balign 128 .L_op_ushr_long: /* 0xa5 */ /* File: arm64/op_ushr_long.S */ /* File: arm64/shiftWide.S */ /* * 64-bit shift operation. * * For: shl-long, shr-long, ushr-long */ /* binop vAA, vBB, vCC */ FETCH w0, 1 // w0<- CCBB lsr w3, wINST, #8 // w3<- AA lsr w2, w0, #8 // w2<- CC GET_VREG w2, w2 // w2<- vCC (shift count) and w1, w0, #255 // w1<- BB GET_VREG_WIDE x1, w1 // x1<- vBB FETCH_ADVANCE_INST 2 // advance rPC, load rINST and x2, x2, #63 // Mask low 6 lsr x0, x1, x2 // Do the shift. GET_INST_OPCODE ip // extract opcode from rINST SET_VREG_WIDE x0, w3 // vAA<- x0 GOTO_OPCODE ip // jump to next instruction /* 11-14 instructions */ /* ------------------------------ */ .balign 128 .L_op_add_float: /* 0xa6 */ /* File: arm64/op_add_float.S */ /* File: arm64/fbinop.S */ /*: * Generic 32-bit floating-point operation. * * For: add-float, sub-float, mul-float, div-float * form: s0, s0, s1 */ /* floatop vAA, vBB, vCC */ FETCH w0, 1 // r0<- CCBB lsr w1, w0, #8 // r2<- CC and w0, w0, #255 // r1<- BB GET_VREG s1, w1 GET_VREG s0, w0 fadd s0, s0, s1 // s0<- op lsr w1, wINST, #8 // r1<- AA FETCH_ADVANCE_INST 2 // advance rPC, load rINST GET_INST_OPCODE ip // extract opcode from rINST SET_VREG s0, w1 GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_sub_float: /* 0xa7 */ /* File: arm64/op_sub_float.S */ /* File: arm64/fbinop.S */ /*: * Generic 32-bit floating-point operation. * * For: add-float, sub-float, mul-float, div-float * form: s0, s0, s1 */ /* floatop vAA, vBB, vCC */ FETCH w0, 1 // r0<- CCBB lsr w1, w0, #8 // r2<- CC and w0, w0, #255 // r1<- BB GET_VREG s1, w1 GET_VREG s0, w0 fsub s0, s0, s1 // s0<- op lsr w1, wINST, #8 // r1<- AA FETCH_ADVANCE_INST 2 // advance rPC, load rINST GET_INST_OPCODE ip // extract opcode from rINST SET_VREG s0, w1 GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_mul_float: /* 0xa8 */ /* File: arm64/op_mul_float.S */ /* File: arm64/fbinop.S */ /*: * Generic 32-bit floating-point operation. * * For: add-float, sub-float, mul-float, div-float * form: s0, s0, s1 */ /* floatop vAA, vBB, vCC */ FETCH w0, 1 // r0<- CCBB lsr w1, w0, #8 // r2<- CC and w0, w0, #255 // r1<- BB GET_VREG s1, w1 GET_VREG s0, w0 fmul s0, s0, s1 // s0<- op lsr w1, wINST, #8 // r1<- AA FETCH_ADVANCE_INST 2 // advance rPC, load rINST GET_INST_OPCODE ip // extract opcode from rINST SET_VREG s0, w1 GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_div_float: /* 0xa9 */ /* File: arm64/op_div_float.S */ /* File: arm64/fbinop.S */ /*: * Generic 32-bit floating-point operation. * * For: add-float, sub-float, mul-float, div-float * form: s0, s0, s1 */ /* floatop vAA, vBB, vCC */ FETCH w0, 1 // r0<- CCBB lsr w1, w0, #8 // r2<- CC and w0, w0, #255 // r1<- BB GET_VREG s1, w1 GET_VREG s0, w0 fdiv s0, s0, s1 // s0<- op lsr w1, wINST, #8 // r1<- AA FETCH_ADVANCE_INST 2 // advance rPC, load rINST GET_INST_OPCODE ip // extract opcode from rINST SET_VREG s0, w1 GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_rem_float: /* 0xaa */ /* File: arm64/op_rem_float.S */ /* EABI doesn't define a float remainder function, but libm does */ /* File: arm64/fbinop.S */ /*: * Generic 32-bit floating-point operation. * * For: add-float, sub-float, mul-float, div-float * form: s0, s0, s1 */ /* floatop vAA, vBB, vCC */ FETCH w0, 1 // r0<- CCBB lsr w1, w0, #8 // r2<- CC and w0, w0, #255 // r1<- BB GET_VREG s1, w1 GET_VREG s0, w0 bl fmodf // s0<- op lsr w1, wINST, #8 // r1<- AA FETCH_ADVANCE_INST 2 // advance rPC, load rINST GET_INST_OPCODE ip // extract opcode from rINST SET_VREG s0, w1 GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_add_double: /* 0xab */ /* File: arm64/op_add_double.S */ /* File: arm64/binopWide.S */ /* * Generic 64-bit binary operation. Provide an "instr" line that * specifies an instruction that performs "result = x1 op x2". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than x0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-long, sub-long, mul-long, div-long, rem-long, and-long, or-long, * xor-long, add-double, sub-double, mul-double, div-double, rem-double */ /* binop vAA, vBB, vCC */ FETCH w0, 1 // w0<- CCBB lsr w4, wINST, #8 // w4<- AA lsr w2, w0, #8 // w2<- CC and w1, w0, #255 // w1<- BB GET_VREG_WIDE d2, w2 // w2<- vCC GET_VREG_WIDE d1, w1 // w1<- vBB .if 0 cbz d2, common_errDivideByZero // is second operand zero? .endif FETCH_ADVANCE_INST 2 // advance rPC, load rINST fadd d0, d1, d2 // d0<- op, w0-w4 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG_WIDE d0, w4 // vAA<- d0 GOTO_OPCODE ip // jump to next instruction /* 11-14 instructions */ /* ------------------------------ */ .balign 128 .L_op_sub_double: /* 0xac */ /* File: arm64/op_sub_double.S */ /* File: arm64/binopWide.S */ /* * Generic 64-bit binary operation. Provide an "instr" line that * specifies an instruction that performs "result = x1 op x2". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than x0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-long, sub-long, mul-long, div-long, rem-long, and-long, or-long, * xor-long, add-double, sub-double, mul-double, div-double, rem-double */ /* binop vAA, vBB, vCC */ FETCH w0, 1 // w0<- CCBB lsr w4, wINST, #8 // w4<- AA lsr w2, w0, #8 // w2<- CC and w1, w0, #255 // w1<- BB GET_VREG_WIDE d2, w2 // w2<- vCC GET_VREG_WIDE d1, w1 // w1<- vBB .if 0 cbz d2, common_errDivideByZero // is second operand zero? .endif FETCH_ADVANCE_INST 2 // advance rPC, load rINST fsub d0, d1, d2 // d0<- op, w0-w4 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG_WIDE d0, w4 // vAA<- d0 GOTO_OPCODE ip // jump to next instruction /* 11-14 instructions */ /* ------------------------------ */ .balign 128 .L_op_mul_double: /* 0xad */ /* File: arm64/op_mul_double.S */ /* File: arm64/binopWide.S */ /* * Generic 64-bit binary operation. Provide an "instr" line that * specifies an instruction that performs "result = x1 op x2". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than x0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-long, sub-long, mul-long, div-long, rem-long, and-long, or-long, * xor-long, add-double, sub-double, mul-double, div-double, rem-double */ /* binop vAA, vBB, vCC */ FETCH w0, 1 // w0<- CCBB lsr w4, wINST, #8 // w4<- AA lsr w2, w0, #8 // w2<- CC and w1, w0, #255 // w1<- BB GET_VREG_WIDE d2, w2 // w2<- vCC GET_VREG_WIDE d1, w1 // w1<- vBB .if 0 cbz d2, common_errDivideByZero // is second operand zero? .endif FETCH_ADVANCE_INST 2 // advance rPC, load rINST fmul d0, d1, d2 // d0<- op, w0-w4 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG_WIDE d0, w4 // vAA<- d0 GOTO_OPCODE ip // jump to next instruction /* 11-14 instructions */ /* ------------------------------ */ .balign 128 .L_op_div_double: /* 0xae */ /* File: arm64/op_div_double.S */ /* File: arm64/binopWide.S */ /* * Generic 64-bit binary operation. Provide an "instr" line that * specifies an instruction that performs "result = x1 op x2". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than x0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-long, sub-long, mul-long, div-long, rem-long, and-long, or-long, * xor-long, add-double, sub-double, mul-double, div-double, rem-double */ /* binop vAA, vBB, vCC */ FETCH w0, 1 // w0<- CCBB lsr w4, wINST, #8 // w4<- AA lsr w2, w0, #8 // w2<- CC and w1, w0, #255 // w1<- BB GET_VREG_WIDE d2, w2 // w2<- vCC GET_VREG_WIDE d1, w1 // w1<- vBB .if 0 cbz d2, common_errDivideByZero // is second operand zero? .endif FETCH_ADVANCE_INST 2 // advance rPC, load rINST fdiv d0, d1, d2 // d0<- op, w0-w4 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG_WIDE d0, w4 // vAA<- d0 GOTO_OPCODE ip // jump to next instruction /* 11-14 instructions */ /* ------------------------------ */ .balign 128 .L_op_rem_double: /* 0xaf */ /* File: arm64/op_rem_double.S */ /* rem vAA, vBB, vCC */ FETCH w0, 1 // w0<- CCBB lsr w2, w0, #8 // w2<- CC and w1, w0, #255 // w1<- BB GET_VREG_WIDE d1, w2 // d1<- vCC GET_VREG_WIDE d0, w1 // d0<- vBB bl fmod lsr w4, wINST, #8 // w4<- AA FETCH_ADVANCE_INST 2 // advance rPC, load rINST GET_INST_OPCODE ip // extract opcode from rINST SET_VREG_WIDE d0, w4 // vAA<- result GOTO_OPCODE ip // jump to next instruction /* 11-14 instructions */ /* ------------------------------ */ .balign 128 .L_op_add_int_2addr: /* 0xb0 */ /* File: arm64/op_add_int_2addr.S */ /* File: arm64/binop2addr.S */ /* * Generic 32-bit "/2addr" binary operation. Provide an "instr" line * that specifies an instruction that performs "result = w0 op w1". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than w0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr, * rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr, * shl-int/2addr, shr-int/2addr, ushr-int/2addr, add-float/2addr, * sub-float/2addr, mul-float/2addr, div-float/2addr, rem-float/2addr */ /* binop/2addr vA, vB */ lsr w3, wINST, #12 // w3<- B ubfx w9, wINST, #8, #4 // w9<- A GET_VREG w1, w3 // w1<- vB GET_VREG w0, w9 // w0<- vA .if 0 cbz w1, common_errDivideByZero .endif FETCH_ADVANCE_INST 1 // advance rPC, load rINST // optional op; may set condition codes add w0, w0, w1 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 10-13 instructions */ /* ------------------------------ */ .balign 128 .L_op_sub_int_2addr: /* 0xb1 */ /* File: arm64/op_sub_int_2addr.S */ /* File: arm64/binop2addr.S */ /* * Generic 32-bit "/2addr" binary operation. Provide an "instr" line * that specifies an instruction that performs "result = w0 op w1". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than w0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr, * rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr, * shl-int/2addr, shr-int/2addr, ushr-int/2addr, add-float/2addr, * sub-float/2addr, mul-float/2addr, div-float/2addr, rem-float/2addr */ /* binop/2addr vA, vB */ lsr w3, wINST, #12 // w3<- B ubfx w9, wINST, #8, #4 // w9<- A GET_VREG w1, w3 // w1<- vB GET_VREG w0, w9 // w0<- vA .if 0 cbz w1, common_errDivideByZero .endif FETCH_ADVANCE_INST 1 // advance rPC, load rINST // optional op; may set condition codes sub w0, w0, w1 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 10-13 instructions */ /* ------------------------------ */ .balign 128 .L_op_mul_int_2addr: /* 0xb2 */ /* File: arm64/op_mul_int_2addr.S */ /* must be "mul w0, w1, w0" -- "w0, w0, w1" is illegal */ /* File: arm64/binop2addr.S */ /* * Generic 32-bit "/2addr" binary operation. Provide an "instr" line * that specifies an instruction that performs "result = w0 op w1". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than w0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr, * rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr, * shl-int/2addr, shr-int/2addr, ushr-int/2addr, add-float/2addr, * sub-float/2addr, mul-float/2addr, div-float/2addr, rem-float/2addr */ /* binop/2addr vA, vB */ lsr w3, wINST, #12 // w3<- B ubfx w9, wINST, #8, #4 // w9<- A GET_VREG w1, w3 // w1<- vB GET_VREG w0, w9 // w0<- vA .if 0 cbz w1, common_errDivideByZero .endif FETCH_ADVANCE_INST 1 // advance rPC, load rINST // optional op; may set condition codes mul w0, w1, w0 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 10-13 instructions */ /* ------------------------------ */ .balign 128 .L_op_div_int_2addr: /* 0xb3 */ /* File: arm64/op_div_int_2addr.S */ /* File: arm64/binop2addr.S */ /* * Generic 32-bit "/2addr" binary operation. Provide an "instr" line * that specifies an instruction that performs "result = w0 op w1". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than w0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr, * rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr, * shl-int/2addr, shr-int/2addr, ushr-int/2addr, add-float/2addr, * sub-float/2addr, mul-float/2addr, div-float/2addr, rem-float/2addr */ /* binop/2addr vA, vB */ lsr w3, wINST, #12 // w3<- B ubfx w9, wINST, #8, #4 // w9<- A GET_VREG w1, w3 // w1<- vB GET_VREG w0, w9 // w0<- vA .if 1 cbz w1, common_errDivideByZero .endif FETCH_ADVANCE_INST 1 // advance rPC, load rINST // optional op; may set condition codes sdiv w0, w0, w1 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 10-13 instructions */ /* ------------------------------ */ .balign 128 .L_op_rem_int_2addr: /* 0xb4 */ /* File: arm64/op_rem_int_2addr.S */ /* File: arm64/binop2addr.S */ /* * Generic 32-bit "/2addr" binary operation. Provide an "instr" line * that specifies an instruction that performs "result = w0 op w1". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than w0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr, * rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr, * shl-int/2addr, shr-int/2addr, ushr-int/2addr, add-float/2addr, * sub-float/2addr, mul-float/2addr, div-float/2addr, rem-float/2addr */ /* binop/2addr vA, vB */ lsr w3, wINST, #12 // w3<- B ubfx w9, wINST, #8, #4 // w9<- A GET_VREG w1, w3 // w1<- vB GET_VREG w0, w9 // w0<- vA .if 1 cbz w1, common_errDivideByZero .endif FETCH_ADVANCE_INST 1 // advance rPC, load rINST sdiv w2, w0, w1 // optional op; may set condition codes msub w0, w2, w1, w0 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 10-13 instructions */ /* ------------------------------ */ .balign 128 .L_op_and_int_2addr: /* 0xb5 */ /* File: arm64/op_and_int_2addr.S */ /* File: arm64/binop2addr.S */ /* * Generic 32-bit "/2addr" binary operation. Provide an "instr" line * that specifies an instruction that performs "result = w0 op w1". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than w0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr, * rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr, * shl-int/2addr, shr-int/2addr, ushr-int/2addr, add-float/2addr, * sub-float/2addr, mul-float/2addr, div-float/2addr, rem-float/2addr */ /* binop/2addr vA, vB */ lsr w3, wINST, #12 // w3<- B ubfx w9, wINST, #8, #4 // w9<- A GET_VREG w1, w3 // w1<- vB GET_VREG w0, w9 // w0<- vA .if 0 cbz w1, common_errDivideByZero .endif FETCH_ADVANCE_INST 1 // advance rPC, load rINST // optional op; may set condition codes and w0, w0, w1 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 10-13 instructions */ /* ------------------------------ */ .balign 128 .L_op_or_int_2addr: /* 0xb6 */ /* File: arm64/op_or_int_2addr.S */ /* File: arm64/binop2addr.S */ /* * Generic 32-bit "/2addr" binary operation. Provide an "instr" line * that specifies an instruction that performs "result = w0 op w1". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than w0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr, * rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr, * shl-int/2addr, shr-int/2addr, ushr-int/2addr, add-float/2addr, * sub-float/2addr, mul-float/2addr, div-float/2addr, rem-float/2addr */ /* binop/2addr vA, vB */ lsr w3, wINST, #12 // w3<- B ubfx w9, wINST, #8, #4 // w9<- A GET_VREG w1, w3 // w1<- vB GET_VREG w0, w9 // w0<- vA .if 0 cbz w1, common_errDivideByZero .endif FETCH_ADVANCE_INST 1 // advance rPC, load rINST // optional op; may set condition codes orr w0, w0, w1 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 10-13 instructions */ /* ------------------------------ */ .balign 128 .L_op_xor_int_2addr: /* 0xb7 */ /* File: arm64/op_xor_int_2addr.S */ /* File: arm64/binop2addr.S */ /* * Generic 32-bit "/2addr" binary operation. Provide an "instr" line * that specifies an instruction that performs "result = w0 op w1". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than w0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr, * rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr, * shl-int/2addr, shr-int/2addr, ushr-int/2addr, add-float/2addr, * sub-float/2addr, mul-float/2addr, div-float/2addr, rem-float/2addr */ /* binop/2addr vA, vB */ lsr w3, wINST, #12 // w3<- B ubfx w9, wINST, #8, #4 // w9<- A GET_VREG w1, w3 // w1<- vB GET_VREG w0, w9 // w0<- vA .if 0 cbz w1, common_errDivideByZero .endif FETCH_ADVANCE_INST 1 // advance rPC, load rINST // optional op; may set condition codes eor w0, w0, w1 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 10-13 instructions */ /* ------------------------------ */ .balign 128 .L_op_shl_int_2addr: /* 0xb8 */ /* File: arm64/op_shl_int_2addr.S */ /* File: arm64/binop2addr.S */ /* * Generic 32-bit "/2addr" binary operation. Provide an "instr" line * that specifies an instruction that performs "result = w0 op w1". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than w0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr, * rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr, * shl-int/2addr, shr-int/2addr, ushr-int/2addr, add-float/2addr, * sub-float/2addr, mul-float/2addr, div-float/2addr, rem-float/2addr */ /* binop/2addr vA, vB */ lsr w3, wINST, #12 // w3<- B ubfx w9, wINST, #8, #4 // w9<- A GET_VREG w1, w3 // w1<- vB GET_VREG w0, w9 // w0<- vA .if 0 cbz w1, common_errDivideByZero .endif FETCH_ADVANCE_INST 1 // advance rPC, load rINST and w1, w1, #31 // optional op; may set condition codes lsl w0, w0, w1 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 10-13 instructions */ /* ------------------------------ */ .balign 128 .L_op_shr_int_2addr: /* 0xb9 */ /* File: arm64/op_shr_int_2addr.S */ /* File: arm64/binop2addr.S */ /* * Generic 32-bit "/2addr" binary operation. Provide an "instr" line * that specifies an instruction that performs "result = w0 op w1". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than w0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr, * rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr, * shl-int/2addr, shr-int/2addr, ushr-int/2addr, add-float/2addr, * sub-float/2addr, mul-float/2addr, div-float/2addr, rem-float/2addr */ /* binop/2addr vA, vB */ lsr w3, wINST, #12 // w3<- B ubfx w9, wINST, #8, #4 // w9<- A GET_VREG w1, w3 // w1<- vB GET_VREG w0, w9 // w0<- vA .if 0 cbz w1, common_errDivideByZero .endif FETCH_ADVANCE_INST 1 // advance rPC, load rINST and w1, w1, #31 // optional op; may set condition codes asr w0, w0, w1 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 10-13 instructions */ /* ------------------------------ */ .balign 128 .L_op_ushr_int_2addr: /* 0xba */ /* File: arm64/op_ushr_int_2addr.S */ /* File: arm64/binop2addr.S */ /* * Generic 32-bit "/2addr" binary operation. Provide an "instr" line * that specifies an instruction that performs "result = w0 op w1". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than w0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr, * rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr, * shl-int/2addr, shr-int/2addr, ushr-int/2addr, add-float/2addr, * sub-float/2addr, mul-float/2addr, div-float/2addr, rem-float/2addr */ /* binop/2addr vA, vB */ lsr w3, wINST, #12 // w3<- B ubfx w9, wINST, #8, #4 // w9<- A GET_VREG w1, w3 // w1<- vB GET_VREG w0, w9 // w0<- vA .if 0 cbz w1, common_errDivideByZero .endif FETCH_ADVANCE_INST 1 // advance rPC, load rINST and w1, w1, #31 // optional op; may set condition codes lsr w0, w0, w1 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 10-13 instructions */ /* ------------------------------ */ .balign 128 .L_op_add_long_2addr: /* 0xbb */ /* File: arm64/op_add_long_2addr.S */ /* File: arm64/binopWide2addr.S */ /* * Generic 64-bit "/2addr" binary operation. Provide an "instr" line * that specifies an instruction that performs "x0 = x0 op x1". * This must not be a function call, as we keep w2 live across it. * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-long/2addr, sub-long/2addr, mul-long/2addr, div-long/2addr, * and-long/2addr, or-long/2addr, xor-long/2addr, * shl-long/2addr, shr-long/2addr, ushr-long/2addr, add-double/2addr, * sub-double/2addr, mul-double/2addr, div-double/2addr, rem-double/2addr */ /* binop/2addr vA, vB */ lsr w1, wINST, #12 // w1<- B ubfx w2, wINST, #8, #4 // w2<- A GET_VREG_WIDE x1, w1 // x1<- vB GET_VREG_WIDE x0, w2 // x0<- vA .if 0 cbz x1, common_errDivideByZero .endif FETCH_ADVANCE_INST 1 // advance rPC, load rINST add x0, x0, x1 // result<- op GET_INST_OPCODE ip // extract opcode from rINST SET_VREG_WIDE x0, w2 // vAA<- result GOTO_OPCODE ip // jump to next instruction /* 10-13 instructions */ /* ------------------------------ */ .balign 128 .L_op_sub_long_2addr: /* 0xbc */ /* File: arm64/op_sub_long_2addr.S */ /* File: arm64/binopWide2addr.S */ /* * Generic 64-bit "/2addr" binary operation. Provide an "instr" line * that specifies an instruction that performs "x0 = x0 op x1". * This must not be a function call, as we keep w2 live across it. * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-long/2addr, sub-long/2addr, mul-long/2addr, div-long/2addr, * and-long/2addr, or-long/2addr, xor-long/2addr, * shl-long/2addr, shr-long/2addr, ushr-long/2addr, add-double/2addr, * sub-double/2addr, mul-double/2addr, div-double/2addr, rem-double/2addr */ /* binop/2addr vA, vB */ lsr w1, wINST, #12 // w1<- B ubfx w2, wINST, #8, #4 // w2<- A GET_VREG_WIDE x1, w1 // x1<- vB GET_VREG_WIDE x0, w2 // x0<- vA .if 0 cbz x1, common_errDivideByZero .endif FETCH_ADVANCE_INST 1 // advance rPC, load rINST sub x0, x0, x1 // result<- op GET_INST_OPCODE ip // extract opcode from rINST SET_VREG_WIDE x0, w2 // vAA<- result GOTO_OPCODE ip // jump to next instruction /* 10-13 instructions */ /* ------------------------------ */ .balign 128 .L_op_mul_long_2addr: /* 0xbd */ /* File: arm64/op_mul_long_2addr.S */ /* File: arm64/binopWide2addr.S */ /* * Generic 64-bit "/2addr" binary operation. Provide an "instr" line * that specifies an instruction that performs "x0 = x0 op x1". * This must not be a function call, as we keep w2 live across it. * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-long/2addr, sub-long/2addr, mul-long/2addr, div-long/2addr, * and-long/2addr, or-long/2addr, xor-long/2addr, * shl-long/2addr, shr-long/2addr, ushr-long/2addr, add-double/2addr, * sub-double/2addr, mul-double/2addr, div-double/2addr, rem-double/2addr */ /* binop/2addr vA, vB */ lsr w1, wINST, #12 // w1<- B ubfx w2, wINST, #8, #4 // w2<- A GET_VREG_WIDE x1, w1 // x1<- vB GET_VREG_WIDE x0, w2 // x0<- vA .if 0 cbz x1, common_errDivideByZero .endif FETCH_ADVANCE_INST 1 // advance rPC, load rINST mul x0, x0, x1 // result<- op GET_INST_OPCODE ip // extract opcode from rINST SET_VREG_WIDE x0, w2 // vAA<- result GOTO_OPCODE ip // jump to next instruction /* 10-13 instructions */ /* ------------------------------ */ .balign 128 .L_op_div_long_2addr: /* 0xbe */ /* File: arm64/op_div_long_2addr.S */ /* File: arm64/binopWide2addr.S */ /* * Generic 64-bit "/2addr" binary operation. Provide an "instr" line * that specifies an instruction that performs "x0 = x0 op x1". * This must not be a function call, as we keep w2 live across it. * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-long/2addr, sub-long/2addr, mul-long/2addr, div-long/2addr, * and-long/2addr, or-long/2addr, xor-long/2addr, * shl-long/2addr, shr-long/2addr, ushr-long/2addr, add-double/2addr, * sub-double/2addr, mul-double/2addr, div-double/2addr, rem-double/2addr */ /* binop/2addr vA, vB */ lsr w1, wINST, #12 // w1<- B ubfx w2, wINST, #8, #4 // w2<- A GET_VREG_WIDE x1, w1 // x1<- vB GET_VREG_WIDE x0, w2 // x0<- vA .if 1 cbz x1, common_errDivideByZero .endif FETCH_ADVANCE_INST 1 // advance rPC, load rINST sdiv x0, x0, x1 // result<- op GET_INST_OPCODE ip // extract opcode from rINST SET_VREG_WIDE x0, w2 // vAA<- result GOTO_OPCODE ip // jump to next instruction /* 10-13 instructions */ /* ------------------------------ */ .balign 128 .L_op_rem_long_2addr: /* 0xbf */ /* File: arm64/op_rem_long_2addr.S */ /* File: arm64/binopWide2addr.S */ /* * Generic 64-bit "/2addr" binary operation. Provide an "instr" line * that specifies an instruction that performs "x0 = x0 op x1". * This must not be a function call, as we keep w2 live across it. * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-long/2addr, sub-long/2addr, mul-long/2addr, div-long/2addr, * and-long/2addr, or-long/2addr, xor-long/2addr, * shl-long/2addr, shr-long/2addr, ushr-long/2addr, add-double/2addr, * sub-double/2addr, mul-double/2addr, div-double/2addr, rem-double/2addr */ /* binop/2addr vA, vB */ lsr w1, wINST, #12 // w1<- B ubfx w2, wINST, #8, #4 // w2<- A GET_VREG_WIDE x1, w1 // x1<- vB GET_VREG_WIDE x0, w2 // x0<- vA .if 1 cbz x1, common_errDivideByZero .endif FETCH_ADVANCE_INST 1 // advance rPC, load rINST sdiv x3, x0, x1 msub x0, x3, x1, x0 // result<- op GET_INST_OPCODE ip // extract opcode from rINST SET_VREG_WIDE x0, w2 // vAA<- result GOTO_OPCODE ip // jump to next instruction /* 10-13 instructions */ /* ------------------------------ */ .balign 128 .L_op_and_long_2addr: /* 0xc0 */ /* File: arm64/op_and_long_2addr.S */ /* File: arm64/binopWide2addr.S */ /* * Generic 64-bit "/2addr" binary operation. Provide an "instr" line * that specifies an instruction that performs "x0 = x0 op x1". * This must not be a function call, as we keep w2 live across it. * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-long/2addr, sub-long/2addr, mul-long/2addr, div-long/2addr, * and-long/2addr, or-long/2addr, xor-long/2addr, * shl-long/2addr, shr-long/2addr, ushr-long/2addr, add-double/2addr, * sub-double/2addr, mul-double/2addr, div-double/2addr, rem-double/2addr */ /* binop/2addr vA, vB */ lsr w1, wINST, #12 // w1<- B ubfx w2, wINST, #8, #4 // w2<- A GET_VREG_WIDE x1, w1 // x1<- vB GET_VREG_WIDE x0, w2 // x0<- vA .if 0 cbz x1, common_errDivideByZero .endif FETCH_ADVANCE_INST 1 // advance rPC, load rINST and x0, x0, x1 // result<- op GET_INST_OPCODE ip // extract opcode from rINST SET_VREG_WIDE x0, w2 // vAA<- result GOTO_OPCODE ip // jump to next instruction /* 10-13 instructions */ /* ------------------------------ */ .balign 128 .L_op_or_long_2addr: /* 0xc1 */ /* File: arm64/op_or_long_2addr.S */ /* File: arm64/binopWide2addr.S */ /* * Generic 64-bit "/2addr" binary operation. Provide an "instr" line * that specifies an instruction that performs "x0 = x0 op x1". * This must not be a function call, as we keep w2 live across it. * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-long/2addr, sub-long/2addr, mul-long/2addr, div-long/2addr, * and-long/2addr, or-long/2addr, xor-long/2addr, * shl-long/2addr, shr-long/2addr, ushr-long/2addr, add-double/2addr, * sub-double/2addr, mul-double/2addr, div-double/2addr, rem-double/2addr */ /* binop/2addr vA, vB */ lsr w1, wINST, #12 // w1<- B ubfx w2, wINST, #8, #4 // w2<- A GET_VREG_WIDE x1, w1 // x1<- vB GET_VREG_WIDE x0, w2 // x0<- vA .if 0 cbz x1, common_errDivideByZero .endif FETCH_ADVANCE_INST 1 // advance rPC, load rINST orr x0, x0, x1 // result<- op GET_INST_OPCODE ip // extract opcode from rINST SET_VREG_WIDE x0, w2 // vAA<- result GOTO_OPCODE ip // jump to next instruction /* 10-13 instructions */ /* ------------------------------ */ .balign 128 .L_op_xor_long_2addr: /* 0xc2 */ /* File: arm64/op_xor_long_2addr.S */ /* File: arm64/binopWide2addr.S */ /* * Generic 64-bit "/2addr" binary operation. Provide an "instr" line * that specifies an instruction that performs "x0 = x0 op x1". * This must not be a function call, as we keep w2 live across it. * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-long/2addr, sub-long/2addr, mul-long/2addr, div-long/2addr, * and-long/2addr, or-long/2addr, xor-long/2addr, * shl-long/2addr, shr-long/2addr, ushr-long/2addr, add-double/2addr, * sub-double/2addr, mul-double/2addr, div-double/2addr, rem-double/2addr */ /* binop/2addr vA, vB */ lsr w1, wINST, #12 // w1<- B ubfx w2, wINST, #8, #4 // w2<- A GET_VREG_WIDE x1, w1 // x1<- vB GET_VREG_WIDE x0, w2 // x0<- vA .if 0 cbz x1, common_errDivideByZero .endif FETCH_ADVANCE_INST 1 // advance rPC, load rINST eor x0, x0, x1 // result<- op GET_INST_OPCODE ip // extract opcode from rINST SET_VREG_WIDE x0, w2 // vAA<- result GOTO_OPCODE ip // jump to next instruction /* 10-13 instructions */ /* ------------------------------ */ .balign 128 .L_op_shl_long_2addr: /* 0xc3 */ /* File: arm64/op_shl_long_2addr.S */ /* File: arm64/shiftWide2addr.S */ /* * Generic 64-bit shift operation. */ /* binop/2addr vA, vB */ lsr w1, wINST, #12 // w1<- B ubfx w2, wINST, #8, #4 // w2<- A GET_VREG w1, w1 // x1<- vB GET_VREG_WIDE x0, w2 // x0<- vA FETCH_ADVANCE_INST 1 // advance rPC, load rINST and x1, x1, #63 // Mask low 6 bits. lsl x0, x0, x1 GET_INST_OPCODE ip // extract opcode from rINST SET_VREG_WIDE x0, w2 // vAA<- result GOTO_OPCODE ip // jump to next instruction /* 10-13 instructions */ /* ------------------------------ */ .balign 128 .L_op_shr_long_2addr: /* 0xc4 */ /* File: arm64/op_shr_long_2addr.S */ /* File: arm64/shiftWide2addr.S */ /* * Generic 64-bit shift operation. */ /* binop/2addr vA, vB */ lsr w1, wINST, #12 // w1<- B ubfx w2, wINST, #8, #4 // w2<- A GET_VREG w1, w1 // x1<- vB GET_VREG_WIDE x0, w2 // x0<- vA FETCH_ADVANCE_INST 1 // advance rPC, load rINST and x1, x1, #63 // Mask low 6 bits. asr x0, x0, x1 GET_INST_OPCODE ip // extract opcode from rINST SET_VREG_WIDE x0, w2 // vAA<- result GOTO_OPCODE ip // jump to next instruction /* 10-13 instructions */ /* ------------------------------ */ .balign 128 .L_op_ushr_long_2addr: /* 0xc5 */ /* File: arm64/op_ushr_long_2addr.S */ /* File: arm64/shiftWide2addr.S */ /* * Generic 64-bit shift operation. */ /* binop/2addr vA, vB */ lsr w1, wINST, #12 // w1<- B ubfx w2, wINST, #8, #4 // w2<- A GET_VREG w1, w1 // x1<- vB GET_VREG_WIDE x0, w2 // x0<- vA FETCH_ADVANCE_INST 1 // advance rPC, load rINST and x1, x1, #63 // Mask low 6 bits. lsr x0, x0, x1 GET_INST_OPCODE ip // extract opcode from rINST SET_VREG_WIDE x0, w2 // vAA<- result GOTO_OPCODE ip // jump to next instruction /* 10-13 instructions */ /* ------------------------------ */ .balign 128 .L_op_add_float_2addr: /* 0xc6 */ /* File: arm64/op_add_float_2addr.S */ /* File: arm64/fbinop2addr.S */ /* * Generic 32-bit floating point "/2addr" binary operation. Provide * an "instr" line that specifies an instruction that performs * "s2 = s0 op s1". * * For: add-float/2addr, sub-float/2addr, mul-float/2addr, div-float/2addr */ /* binop/2addr vA, vB */ lsr w3, wINST, #12 // w3<- B lsr w9, wINST, #8 // w9<- A+ and w9, w9, #15 // w9<- A GET_VREG s1, w3 GET_VREG s0, w9 fadd s2, s0, s1 // s2<- op FETCH_ADVANCE_INST 1 // advance rPC, load rINST GET_INST_OPCODE ip // extract opcode from rINST SET_VREG s2, w9 GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_sub_float_2addr: /* 0xc7 */ /* File: arm64/op_sub_float_2addr.S */ /* File: arm64/fbinop2addr.S */ /* * Generic 32-bit floating point "/2addr" binary operation. Provide * an "instr" line that specifies an instruction that performs * "s2 = s0 op s1". * * For: add-float/2addr, sub-float/2addr, mul-float/2addr, div-float/2addr */ /* binop/2addr vA, vB */ lsr w3, wINST, #12 // w3<- B lsr w9, wINST, #8 // w9<- A+ and w9, w9, #15 // w9<- A GET_VREG s1, w3 GET_VREG s0, w9 fsub s2, s0, s1 // s2<- op FETCH_ADVANCE_INST 1 // advance rPC, load rINST GET_INST_OPCODE ip // extract opcode from rINST SET_VREG s2, w9 GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_mul_float_2addr: /* 0xc8 */ /* File: arm64/op_mul_float_2addr.S */ /* File: arm64/fbinop2addr.S */ /* * Generic 32-bit floating point "/2addr" binary operation. Provide * an "instr" line that specifies an instruction that performs * "s2 = s0 op s1". * * For: add-float/2addr, sub-float/2addr, mul-float/2addr, div-float/2addr */ /* binop/2addr vA, vB */ lsr w3, wINST, #12 // w3<- B lsr w9, wINST, #8 // w9<- A+ and w9, w9, #15 // w9<- A GET_VREG s1, w3 GET_VREG s0, w9 fmul s2, s0, s1 // s2<- op FETCH_ADVANCE_INST 1 // advance rPC, load rINST GET_INST_OPCODE ip // extract opcode from rINST SET_VREG s2, w9 GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_div_float_2addr: /* 0xc9 */ /* File: arm64/op_div_float_2addr.S */ /* File: arm64/fbinop2addr.S */ /* * Generic 32-bit floating point "/2addr" binary operation. Provide * an "instr" line that specifies an instruction that performs * "s2 = s0 op s1". * * For: add-float/2addr, sub-float/2addr, mul-float/2addr, div-float/2addr */ /* binop/2addr vA, vB */ lsr w3, wINST, #12 // w3<- B lsr w9, wINST, #8 // w9<- A+ and w9, w9, #15 // w9<- A GET_VREG s1, w3 GET_VREG s0, w9 fdiv s2, s0, s1 // s2<- op FETCH_ADVANCE_INST 1 // advance rPC, load rINST GET_INST_OPCODE ip // extract opcode from rINST SET_VREG s2, w9 GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_rem_float_2addr: /* 0xca */ /* File: arm64/op_rem_float_2addr.S */ /* rem vA, vB */ lsr w3, wINST, #12 // w3<- B lsr w9, wINST, #8 // w9<- A+ and w9, w9, #15 // w9<- A GET_VREG s1, w3 GET_VREG s0, w9 bl fmodf lsr w9, wINST, #8 // w9<- A+ and w9, w9, #15 // w9<- A FETCH_ADVANCE_INST 1 // advance rPC, load rINST GET_INST_OPCODE ip // extract opcode from rINST SET_VREG s0, w9 GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_add_double_2addr: /* 0xcb */ /* File: arm64/op_add_double_2addr.S */ /* File: arm64/binopWide2addr.S */ /* * Generic 64-bit "/2addr" binary operation. Provide an "instr" line * that specifies an instruction that performs "x0 = x0 op x1". * This must not be a function call, as we keep w2 live across it. * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-long/2addr, sub-long/2addr, mul-long/2addr, div-long/2addr, * and-long/2addr, or-long/2addr, xor-long/2addr, * shl-long/2addr, shr-long/2addr, ushr-long/2addr, add-double/2addr, * sub-double/2addr, mul-double/2addr, div-double/2addr, rem-double/2addr */ /* binop/2addr vA, vB */ lsr w1, wINST, #12 // w1<- B ubfx w2, wINST, #8, #4 // w2<- A GET_VREG_WIDE d1, w1 // x1<- vB GET_VREG_WIDE d0, w2 // x0<- vA .if 0 cbz d1, common_errDivideByZero .endif FETCH_ADVANCE_INST 1 // advance rPC, load rINST fadd d0, d0, d1 // result<- op GET_INST_OPCODE ip // extract opcode from rINST SET_VREG_WIDE d0, w2 // vAA<- result GOTO_OPCODE ip // jump to next instruction /* 10-13 instructions */ /* ------------------------------ */ .balign 128 .L_op_sub_double_2addr: /* 0xcc */ /* File: arm64/op_sub_double_2addr.S */ /* File: arm64/binopWide2addr.S */ /* * Generic 64-bit "/2addr" binary operation. Provide an "instr" line * that specifies an instruction that performs "x0 = x0 op x1". * This must not be a function call, as we keep w2 live across it. * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-long/2addr, sub-long/2addr, mul-long/2addr, div-long/2addr, * and-long/2addr, or-long/2addr, xor-long/2addr, * shl-long/2addr, shr-long/2addr, ushr-long/2addr, add-double/2addr, * sub-double/2addr, mul-double/2addr, div-double/2addr, rem-double/2addr */ /* binop/2addr vA, vB */ lsr w1, wINST, #12 // w1<- B ubfx w2, wINST, #8, #4 // w2<- A GET_VREG_WIDE d1, w1 // x1<- vB GET_VREG_WIDE d0, w2 // x0<- vA .if 0 cbz d1, common_errDivideByZero .endif FETCH_ADVANCE_INST 1 // advance rPC, load rINST fsub d0, d0, d1 // result<- op GET_INST_OPCODE ip // extract opcode from rINST SET_VREG_WIDE d0, w2 // vAA<- result GOTO_OPCODE ip // jump to next instruction /* 10-13 instructions */ /* ------------------------------ */ .balign 128 .L_op_mul_double_2addr: /* 0xcd */ /* File: arm64/op_mul_double_2addr.S */ /* File: arm64/binopWide2addr.S */ /* * Generic 64-bit "/2addr" binary operation. Provide an "instr" line * that specifies an instruction that performs "x0 = x0 op x1". * This must not be a function call, as we keep w2 live across it. * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-long/2addr, sub-long/2addr, mul-long/2addr, div-long/2addr, * and-long/2addr, or-long/2addr, xor-long/2addr, * shl-long/2addr, shr-long/2addr, ushr-long/2addr, add-double/2addr, * sub-double/2addr, mul-double/2addr, div-double/2addr, rem-double/2addr */ /* binop/2addr vA, vB */ lsr w1, wINST, #12 // w1<- B ubfx w2, wINST, #8, #4 // w2<- A GET_VREG_WIDE d1, w1 // x1<- vB GET_VREG_WIDE d0, w2 // x0<- vA .if 0 cbz d1, common_errDivideByZero .endif FETCH_ADVANCE_INST 1 // advance rPC, load rINST fmul d0, d0, d1 // result<- op GET_INST_OPCODE ip // extract opcode from rINST SET_VREG_WIDE d0, w2 // vAA<- result GOTO_OPCODE ip // jump to next instruction /* 10-13 instructions */ /* ------------------------------ */ .balign 128 .L_op_div_double_2addr: /* 0xce */ /* File: arm64/op_div_double_2addr.S */ /* File: arm64/binopWide2addr.S */ /* * Generic 64-bit "/2addr" binary operation. Provide an "instr" line * that specifies an instruction that performs "x0 = x0 op x1". * This must not be a function call, as we keep w2 live across it. * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-long/2addr, sub-long/2addr, mul-long/2addr, div-long/2addr, * and-long/2addr, or-long/2addr, xor-long/2addr, * shl-long/2addr, shr-long/2addr, ushr-long/2addr, add-double/2addr, * sub-double/2addr, mul-double/2addr, div-double/2addr, rem-double/2addr */ /* binop/2addr vA, vB */ lsr w1, wINST, #12 // w1<- B ubfx w2, wINST, #8, #4 // w2<- A GET_VREG_WIDE d1, w1 // x1<- vB GET_VREG_WIDE d0, w2 // x0<- vA .if 0 cbz d1, common_errDivideByZero .endif FETCH_ADVANCE_INST 1 // advance rPC, load rINST fdiv d0, d0, d1 // result<- op GET_INST_OPCODE ip // extract opcode from rINST SET_VREG_WIDE d0, w2 // vAA<- result GOTO_OPCODE ip // jump to next instruction /* 10-13 instructions */ /* ------------------------------ */ .balign 128 .L_op_rem_double_2addr: /* 0xcf */ /* File: arm64/op_rem_double_2addr.S */ /* rem vA, vB */ lsr w1, wINST, #12 // w1<- B ubfx w2, wINST, #8, #4 // w2<- A GET_VREG_WIDE d1, w1 // d1<- vB GET_VREG_WIDE d0, w2 // d0<- vA bl fmod ubfx w2, wINST, #8, #4 // w2<- A (need to reload - killed across call) FETCH_ADVANCE_INST 1 // advance rPC, load rINST GET_INST_OPCODE ip // extract opcode from rINST SET_VREG_WIDE d0, w2 // vAA<- result GOTO_OPCODE ip // jump to next instruction /* 10-13 instructions */ /* ------------------------------ */ .balign 128 .L_op_add_int_lit16: /* 0xd0 */ /* File: arm64/op_add_int_lit16.S */ /* File: arm64/binopLit16.S */ /* * Generic 32-bit "lit16" binary operation. Provide an "instr" line * that specifies an instruction that performs "result = w0 op w1". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than w0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16, * rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16 */ /* binop/lit16 vA, vB, #+CCCC */ FETCH_S w1, 1 // w1<- ssssCCCC (sign-extended) lsr w2, wINST, #12 // w2<- B ubfx w9, wINST, #8, #4 // w9<- A GET_VREG w0, w2 // w0<- vB .if 0 cbz w1, common_errDivideByZero .endif FETCH_ADVANCE_INST 2 // advance rPC, load rINST add w0, w0, w1 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 10-13 instructions */ /* ------------------------------ */ .balign 128 .L_op_rsub_int: /* 0xd1 */ /* File: arm64/op_rsub_int.S */ /* this op is "rsub-int", but can be thought of as "rsub-int/lit16" */ /* File: arm64/binopLit16.S */ /* * Generic 32-bit "lit16" binary operation. Provide an "instr" line * that specifies an instruction that performs "result = w0 op w1". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than w0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16, * rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16 */ /* binop/lit16 vA, vB, #+CCCC */ FETCH_S w1, 1 // w1<- ssssCCCC (sign-extended) lsr w2, wINST, #12 // w2<- B ubfx w9, wINST, #8, #4 // w9<- A GET_VREG w0, w2 // w0<- vB .if 0 cbz w1, common_errDivideByZero .endif FETCH_ADVANCE_INST 2 // advance rPC, load rINST sub w0, w1, w0 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 10-13 instructions */ /* ------------------------------ */ .balign 128 .L_op_mul_int_lit16: /* 0xd2 */ /* File: arm64/op_mul_int_lit16.S */ /* must be "mul w0, w1, w0" -- "w0, w0, w1" is illegal */ /* File: arm64/binopLit16.S */ /* * Generic 32-bit "lit16" binary operation. Provide an "instr" line * that specifies an instruction that performs "result = w0 op w1". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than w0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16, * rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16 */ /* binop/lit16 vA, vB, #+CCCC */ FETCH_S w1, 1 // w1<- ssssCCCC (sign-extended) lsr w2, wINST, #12 // w2<- B ubfx w9, wINST, #8, #4 // w9<- A GET_VREG w0, w2 // w0<- vB .if 0 cbz w1, common_errDivideByZero .endif FETCH_ADVANCE_INST 2 // advance rPC, load rINST mul w0, w1, w0 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 10-13 instructions */ /* ------------------------------ */ .balign 128 .L_op_div_int_lit16: /* 0xd3 */ /* File: arm64/op_div_int_lit16.S */ /* File: arm64/binopLit16.S */ /* * Generic 32-bit "lit16" binary operation. Provide an "instr" line * that specifies an instruction that performs "result = w0 op w1". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than w0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16, * rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16 */ /* binop/lit16 vA, vB, #+CCCC */ FETCH_S w1, 1 // w1<- ssssCCCC (sign-extended) lsr w2, wINST, #12 // w2<- B ubfx w9, wINST, #8, #4 // w9<- A GET_VREG w0, w2 // w0<- vB .if 1 cbz w1, common_errDivideByZero .endif FETCH_ADVANCE_INST 2 // advance rPC, load rINST sdiv w0, w0, w1 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 10-13 instructions */ /* ------------------------------ */ .balign 128 .L_op_rem_int_lit16: /* 0xd4 */ /* File: arm64/op_rem_int_lit16.S */ /* File: arm64/binopLit16.S */ /* * Generic 32-bit "lit16" binary operation. Provide an "instr" line * that specifies an instruction that performs "result = w0 op w1". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than w0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16, * rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16 */ /* binop/lit16 vA, vB, #+CCCC */ FETCH_S w1, 1 // w1<- ssssCCCC (sign-extended) lsr w2, wINST, #12 // w2<- B ubfx w9, wINST, #8, #4 // w9<- A GET_VREG w0, w2 // w0<- vB .if 1 cbz w1, common_errDivideByZero .endif FETCH_ADVANCE_INST 2 // advance rPC, load rINST sdiv w3, w0, w1 msub w0, w3, w1, w0 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 10-13 instructions */ /* ------------------------------ */ .balign 128 .L_op_and_int_lit16: /* 0xd5 */ /* File: arm64/op_and_int_lit16.S */ /* File: arm64/binopLit16.S */ /* * Generic 32-bit "lit16" binary operation. Provide an "instr" line * that specifies an instruction that performs "result = w0 op w1". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than w0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16, * rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16 */ /* binop/lit16 vA, vB, #+CCCC */ FETCH_S w1, 1 // w1<- ssssCCCC (sign-extended) lsr w2, wINST, #12 // w2<- B ubfx w9, wINST, #8, #4 // w9<- A GET_VREG w0, w2 // w0<- vB .if 0 cbz w1, common_errDivideByZero .endif FETCH_ADVANCE_INST 2 // advance rPC, load rINST and w0, w0, w1 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 10-13 instructions */ /* ------------------------------ */ .balign 128 .L_op_or_int_lit16: /* 0xd6 */ /* File: arm64/op_or_int_lit16.S */ /* File: arm64/binopLit16.S */ /* * Generic 32-bit "lit16" binary operation. Provide an "instr" line * that specifies an instruction that performs "result = w0 op w1". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than w0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16, * rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16 */ /* binop/lit16 vA, vB, #+CCCC */ FETCH_S w1, 1 // w1<- ssssCCCC (sign-extended) lsr w2, wINST, #12 // w2<- B ubfx w9, wINST, #8, #4 // w9<- A GET_VREG w0, w2 // w0<- vB .if 0 cbz w1, common_errDivideByZero .endif FETCH_ADVANCE_INST 2 // advance rPC, load rINST orr w0, w0, w1 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 10-13 instructions */ /* ------------------------------ */ .balign 128 .L_op_xor_int_lit16: /* 0xd7 */ /* File: arm64/op_xor_int_lit16.S */ /* File: arm64/binopLit16.S */ /* * Generic 32-bit "lit16" binary operation. Provide an "instr" line * that specifies an instruction that performs "result = w0 op w1". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than w0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16, * rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16 */ /* binop/lit16 vA, vB, #+CCCC */ FETCH_S w1, 1 // w1<- ssssCCCC (sign-extended) lsr w2, wINST, #12 // w2<- B ubfx w9, wINST, #8, #4 // w9<- A GET_VREG w0, w2 // w0<- vB .if 0 cbz w1, common_errDivideByZero .endif FETCH_ADVANCE_INST 2 // advance rPC, load rINST eor w0, w0, w1 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 10-13 instructions */ /* ------------------------------ */ .balign 128 .L_op_add_int_lit8: /* 0xd8 */ /* File: arm64/op_add_int_lit8.S */ /* File: arm64/binopLit8.S */ /* * Generic 32-bit "lit8" binary operation. Provide an "instr" line * that specifies an instruction that performs "result = w0 op w1". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than w0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8, * rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8, * shl-int/lit8, shr-int/lit8, ushr-int/lit8 */ /* binop/lit8 vAA, vBB, #+CC */ FETCH_S w3, 1 // w3<- ssssCCBB (sign-extended for CC lsr w9, wINST, #8 // w9<- AA and w2, w3, #255 // w2<- BB GET_VREG w0, w2 // w0<- vBB asr w1, w3, #8 // w1<- ssssssCC (sign extended) .if 0 cbz w1, common_errDivideByZero .endif FETCH_ADVANCE_INST 2 // advance rPC, load rINST // optional op; may set condition codes add w0, w0, w1 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 10-12 instructions */ /* ------------------------------ */ .balign 128 .L_op_rsub_int_lit8: /* 0xd9 */ /* File: arm64/op_rsub_int_lit8.S */ /* File: arm64/binopLit8.S */ /* * Generic 32-bit "lit8" binary operation. Provide an "instr" line * that specifies an instruction that performs "result = w0 op w1". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than w0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8, * rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8, * shl-int/lit8, shr-int/lit8, ushr-int/lit8 */ /* binop/lit8 vAA, vBB, #+CC */ FETCH_S w3, 1 // w3<- ssssCCBB (sign-extended for CC lsr w9, wINST, #8 // w9<- AA and w2, w3, #255 // w2<- BB GET_VREG w0, w2 // w0<- vBB asr w1, w3, #8 // w1<- ssssssCC (sign extended) .if 0 cbz w1, common_errDivideByZero .endif FETCH_ADVANCE_INST 2 // advance rPC, load rINST // optional op; may set condition codes sub w0, w1, w0 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 10-12 instructions */ /* ------------------------------ */ .balign 128 .L_op_mul_int_lit8: /* 0xda */ /* File: arm64/op_mul_int_lit8.S */ /* must be "mul w0, w1, w0" -- "w0, w0, w1" is illegal */ /* File: arm64/binopLit8.S */ /* * Generic 32-bit "lit8" binary operation. Provide an "instr" line * that specifies an instruction that performs "result = w0 op w1". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than w0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8, * rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8, * shl-int/lit8, shr-int/lit8, ushr-int/lit8 */ /* binop/lit8 vAA, vBB, #+CC */ FETCH_S w3, 1 // w3<- ssssCCBB (sign-extended for CC lsr w9, wINST, #8 // w9<- AA and w2, w3, #255 // w2<- BB GET_VREG w0, w2 // w0<- vBB asr w1, w3, #8 // w1<- ssssssCC (sign extended) .if 0 cbz w1, common_errDivideByZero .endif FETCH_ADVANCE_INST 2 // advance rPC, load rINST // optional op; may set condition codes mul w0, w1, w0 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 10-12 instructions */ /* ------------------------------ */ .balign 128 .L_op_div_int_lit8: /* 0xdb */ /* File: arm64/op_div_int_lit8.S */ /* File: arm64/binopLit8.S */ /* * Generic 32-bit "lit8" binary operation. Provide an "instr" line * that specifies an instruction that performs "result = w0 op w1". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than w0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8, * rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8, * shl-int/lit8, shr-int/lit8, ushr-int/lit8 */ /* binop/lit8 vAA, vBB, #+CC */ FETCH_S w3, 1 // w3<- ssssCCBB (sign-extended for CC lsr w9, wINST, #8 // w9<- AA and w2, w3, #255 // w2<- BB GET_VREG w0, w2 // w0<- vBB asr w1, w3, #8 // w1<- ssssssCC (sign extended) .if 1 cbz w1, common_errDivideByZero .endif FETCH_ADVANCE_INST 2 // advance rPC, load rINST // optional op; may set condition codes sdiv w0, w0, w1 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 10-12 instructions */ /* ------------------------------ */ .balign 128 .L_op_rem_int_lit8: /* 0xdc */ /* File: arm64/op_rem_int_lit8.S */ /* File: arm64/binopLit8.S */ /* * Generic 32-bit "lit8" binary operation. Provide an "instr" line * that specifies an instruction that performs "result = w0 op w1". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than w0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8, * rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8, * shl-int/lit8, shr-int/lit8, ushr-int/lit8 */ /* binop/lit8 vAA, vBB, #+CC */ FETCH_S w3, 1 // w3<- ssssCCBB (sign-extended for CC lsr w9, wINST, #8 // w9<- AA and w2, w3, #255 // w2<- BB GET_VREG w0, w2 // w0<- vBB asr w1, w3, #8 // w1<- ssssssCC (sign extended) .if 1 cbz w1, common_errDivideByZero .endif FETCH_ADVANCE_INST 2 // advance rPC, load rINST sdiv w3, w0, w1 // optional op; may set condition codes msub w0, w3, w1, w0 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 10-12 instructions */ /* ------------------------------ */ .balign 128 .L_op_and_int_lit8: /* 0xdd */ /* File: arm64/op_and_int_lit8.S */ /* File: arm64/binopLit8.S */ /* * Generic 32-bit "lit8" binary operation. Provide an "instr" line * that specifies an instruction that performs "result = w0 op w1". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than w0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8, * rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8, * shl-int/lit8, shr-int/lit8, ushr-int/lit8 */ /* binop/lit8 vAA, vBB, #+CC */ FETCH_S w3, 1 // w3<- ssssCCBB (sign-extended for CC lsr w9, wINST, #8 // w9<- AA and w2, w3, #255 // w2<- BB GET_VREG w0, w2 // w0<- vBB asr w1, w3, #8 // w1<- ssssssCC (sign extended) .if 0 cbz w1, common_errDivideByZero .endif FETCH_ADVANCE_INST 2 // advance rPC, load rINST // optional op; may set condition codes and w0, w0, w1 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 10-12 instructions */ /* ------------------------------ */ .balign 128 .L_op_or_int_lit8: /* 0xde */ /* File: arm64/op_or_int_lit8.S */ /* File: arm64/binopLit8.S */ /* * Generic 32-bit "lit8" binary operation. Provide an "instr" line * that specifies an instruction that performs "result = w0 op w1". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than w0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8, * rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8, * shl-int/lit8, shr-int/lit8, ushr-int/lit8 */ /* binop/lit8 vAA, vBB, #+CC */ FETCH_S w3, 1 // w3<- ssssCCBB (sign-extended for CC lsr w9, wINST, #8 // w9<- AA and w2, w3, #255 // w2<- BB GET_VREG w0, w2 // w0<- vBB asr w1, w3, #8 // w1<- ssssssCC (sign extended) .if 0 cbz w1, common_errDivideByZero .endif FETCH_ADVANCE_INST 2 // advance rPC, load rINST // optional op; may set condition codes orr w0, w0, w1 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 10-12 instructions */ /* ------------------------------ */ .balign 128 .L_op_xor_int_lit8: /* 0xdf */ /* File: arm64/op_xor_int_lit8.S */ /* File: arm64/binopLit8.S */ /* * Generic 32-bit "lit8" binary operation. Provide an "instr" line * that specifies an instruction that performs "result = w0 op w1". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than w0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8, * rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8, * shl-int/lit8, shr-int/lit8, ushr-int/lit8 */ /* binop/lit8 vAA, vBB, #+CC */ FETCH_S w3, 1 // w3<- ssssCCBB (sign-extended for CC lsr w9, wINST, #8 // w9<- AA and w2, w3, #255 // w2<- BB GET_VREG w0, w2 // w0<- vBB asr w1, w3, #8 // w1<- ssssssCC (sign extended) .if 0 cbz w1, common_errDivideByZero .endif FETCH_ADVANCE_INST 2 // advance rPC, load rINST // optional op; may set condition codes eor w0, w0, w1 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 10-12 instructions */ /* ------------------------------ */ .balign 128 .L_op_shl_int_lit8: /* 0xe0 */ /* File: arm64/op_shl_int_lit8.S */ /* File: arm64/binopLit8.S */ /* * Generic 32-bit "lit8" binary operation. Provide an "instr" line * that specifies an instruction that performs "result = w0 op w1". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than w0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8, * rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8, * shl-int/lit8, shr-int/lit8, ushr-int/lit8 */ /* binop/lit8 vAA, vBB, #+CC */ FETCH_S w3, 1 // w3<- ssssCCBB (sign-extended for CC lsr w9, wINST, #8 // w9<- AA and w2, w3, #255 // w2<- BB GET_VREG w0, w2 // w0<- vBB asr w1, w3, #8 // w1<- ssssssCC (sign extended) .if 0 cbz w1, common_errDivideByZero .endif FETCH_ADVANCE_INST 2 // advance rPC, load rINST and w1, w1, #31 // optional op; may set condition codes lsl w0, w0, w1 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 10-12 instructions */ /* ------------------------------ */ .balign 128 .L_op_shr_int_lit8: /* 0xe1 */ /* File: arm64/op_shr_int_lit8.S */ /* File: arm64/binopLit8.S */ /* * Generic 32-bit "lit8" binary operation. Provide an "instr" line * that specifies an instruction that performs "result = w0 op w1". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than w0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8, * rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8, * shl-int/lit8, shr-int/lit8, ushr-int/lit8 */ /* binop/lit8 vAA, vBB, #+CC */ FETCH_S w3, 1 // w3<- ssssCCBB (sign-extended for CC lsr w9, wINST, #8 // w9<- AA and w2, w3, #255 // w2<- BB GET_VREG w0, w2 // w0<- vBB asr w1, w3, #8 // w1<- ssssssCC (sign extended) .if 0 cbz w1, common_errDivideByZero .endif FETCH_ADVANCE_INST 2 // advance rPC, load rINST and w1, w1, #31 // optional op; may set condition codes asr w0, w0, w1 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 10-12 instructions */ /* ------------------------------ */ .balign 128 .L_op_ushr_int_lit8: /* 0xe2 */ /* File: arm64/op_ushr_int_lit8.S */ /* File: arm64/binopLit8.S */ /* * Generic 32-bit "lit8" binary operation. Provide an "instr" line * that specifies an instruction that performs "result = w0 op w1". * This could be an ARM instruction or a function call. (If the result * comes back in a register other than w0, you can override "result".) * * If "chkzero" is set to 1, we perform a divide-by-zero check on * vCC (w1). Useful for integer division and modulus. * * For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8, * rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8, * shl-int/lit8, shr-int/lit8, ushr-int/lit8 */ /* binop/lit8 vAA, vBB, #+CC */ FETCH_S w3, 1 // w3<- ssssCCBB (sign-extended for CC lsr w9, wINST, #8 // w9<- AA and w2, w3, #255 // w2<- BB GET_VREG w0, w2 // w0<- vBB asr w1, w3, #8 // w1<- ssssssCC (sign extended) .if 0 cbz w1, common_errDivideByZero .endif FETCH_ADVANCE_INST 2 // advance rPC, load rINST and w1, w1, #31 // optional op; may set condition codes lsr w0, w0, w1 // w0<- op, w0-w3 changed GET_INST_OPCODE ip // extract opcode from rINST SET_VREG w0, w9 // vAA<- w0 GOTO_OPCODE ip // jump to next instruction /* 10-12 instructions */ /* ------------------------------ */ .balign 128 .L_op_iget_quick: /* 0xe3 */ /* File: arm64/op_iget_quick.S */ /* For: iget-quick, iget-boolean-quick, iget-byte-quick, iget-char-quick, iget-short-quick */ /* op vA, vB, offset//CCCC */ lsr w2, wINST, #12 // w2<- B FETCH w1, 1 // w1<- field byte offset GET_VREG w3, w2 // w3<- object we're operating on ubfx w2, wINST, #8, #4 // w2<- A cmp x3, #0 // check object for null beq common_errNullObject // object was null ldr w0, [x3, x1] // w0<- obj.field FETCH_ADVANCE_INST 2 // advance rPC, load rINST SET_VREG w0, w2 // fp[A]<- w0 GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_iget_wide_quick: /* 0xe4 */ /* File: arm64/op_iget_wide_quick.S */ /* iget-wide-quick vA, vB, offset//CCCC */ lsr w2, wINST, #12 // w2<- B FETCH w4, 1 // w4<- field byte offset GET_VREG w3, w2 // w3<- object we're operating on ubfx w2, wINST, #8, #4 // w2<- A cbz w3, common_errNullObject // object was null add x4, x3, x4 // create direct pointer ldr x0, [x4] FETCH_ADVANCE_INST 2 // advance rPC, load wINST SET_VREG_WIDE x0, w2 GET_INST_OPCODE ip // extract opcode from wINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_iget_object_quick: /* 0xe5 */ /* File: arm64/op_iget_object_quick.S */ /* For: iget-object-quick */ /* op vA, vB, offset//CCCC */ lsr w2, wINST, #12 // w2<- B FETCH w1, 1 // w1<- field byte offset EXPORT_PC GET_VREG w0, w2 // w0<- object we're operating on bl artIGetObjectFromMterp // (obj, offset) ldr x3, [xSELF, #THREAD_EXCEPTION_OFFSET] ubfx w2, wINST, #8, #4 // w2<- A PREFETCH_INST 2 cbnz w3, MterpPossibleException // bail out SET_VREG_OBJECT w0, w2 // fp[A]<- w0 ADVANCE 2 // advance rPC GET_INST_OPCODE ip // extract opcode from wINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_iput_quick: /* 0xe6 */ /* File: arm64/op_iput_quick.S */ /* For: iput-quick, iput-object-quick */ /* op vA, vB, offset//CCCC */ lsr w2, wINST, #12 // w2<- B FETCH w1, 1 // w1<- field byte offset GET_VREG w3, w2 // w3<- fp[B], the object pointer ubfx w2, wINST, #8, #4 // w2<- A cmp w3, #0 // check object for null cbz w3, common_errNullObject // object was null GET_VREG w0, w2 // w0<- fp[A] FETCH_ADVANCE_INST 2 // advance rPC, load rINST str w0, [x3, x1] // obj.field<- w0 GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_iput_wide_quick: /* 0xe7 */ /* File: arm64/op_iput_wide_quick.S */ /* iput-wide-quick vA, vB, offset//CCCC */ lsr w2, wINST, #12 // w2<- B FETCH w3, 1 // w3<- field byte offset GET_VREG w2, w2 // w2<- fp[B], the object pointer ubfx w0, wINST, #8, #4 // w0<- A cmp w2, #0 // check object for null beq common_errNullObject // object was null GET_VREG_WIDE x0, w0 // x0-< fp[A] FETCH_ADVANCE_INST 2 // advance rPC, load wINST add x1, x2, x3 // create a direct pointer str x0, [x1] GET_INST_OPCODE ip // extract opcode from wINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_iput_object_quick: /* 0xe8 */ /* File: arm64/op_iput_object_quick.S */ EXPORT_PC add x0, xFP, #OFF_FP_SHADOWFRAME mov x1, xPC mov w2, wINST bl MterpIputObjectQuick cbz w0, MterpException FETCH_ADVANCE_INST 2 // advance rPC, load rINST GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_invoke_virtual_quick: /* 0xe9 */ /* File: arm64/op_invoke_virtual_quick.S */ /* File: arm64/invoke.S */ /* * Generic invoke handler wrapper. */ /* op vB, {vD, vE, vF, vG, vA}, class@CCCC */ /* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */ .extern MterpInvokeVirtualQuick EXPORT_PC mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME mov x2, xPC mov x3, xINST bl MterpInvokeVirtualQuick cbz w0, MterpException FETCH_ADVANCE_INST 3 bl MterpShouldSwitchInterpreters cbnz w0, MterpFallback GET_INST_OPCODE ip GOTO_OPCODE ip /* ------------------------------ */ .balign 128 .L_op_invoke_virtual_range_quick: /* 0xea */ /* File: arm64/op_invoke_virtual_range_quick.S */ /* File: arm64/invoke.S */ /* * Generic invoke handler wrapper. */ /* op vB, {vD, vE, vF, vG, vA}, class@CCCC */ /* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */ .extern MterpInvokeVirtualQuickRange EXPORT_PC mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME mov x2, xPC mov x3, xINST bl MterpInvokeVirtualQuickRange cbz w0, MterpException FETCH_ADVANCE_INST 3 bl MterpShouldSwitchInterpreters cbnz w0, MterpFallback GET_INST_OPCODE ip GOTO_OPCODE ip /* ------------------------------ */ .balign 128 .L_op_iput_boolean_quick: /* 0xeb */ /* File: arm64/op_iput_boolean_quick.S */ /* File: arm64/op_iput_quick.S */ /* For: iput-quick, iput-object-quick */ /* op vA, vB, offset//CCCC */ lsr w2, wINST, #12 // w2<- B FETCH w1, 1 // w1<- field byte offset GET_VREG w3, w2 // w3<- fp[B], the object pointer ubfx w2, wINST, #8, #4 // w2<- A cmp w3, #0 // check object for null cbz w3, common_errNullObject // object was null GET_VREG w0, w2 // w0<- fp[A] FETCH_ADVANCE_INST 2 // advance rPC, load rINST strb w0, [x3, x1] // obj.field<- w0 GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_iput_byte_quick: /* 0xec */ /* File: arm64/op_iput_byte_quick.S */ /* File: arm64/op_iput_quick.S */ /* For: iput-quick, iput-object-quick */ /* op vA, vB, offset//CCCC */ lsr w2, wINST, #12 // w2<- B FETCH w1, 1 // w1<- field byte offset GET_VREG w3, w2 // w3<- fp[B], the object pointer ubfx w2, wINST, #8, #4 // w2<- A cmp w3, #0 // check object for null cbz w3, common_errNullObject // object was null GET_VREG w0, w2 // w0<- fp[A] FETCH_ADVANCE_INST 2 // advance rPC, load rINST strb w0, [x3, x1] // obj.field<- w0 GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_iput_char_quick: /* 0xed */ /* File: arm64/op_iput_char_quick.S */ /* File: arm64/op_iput_quick.S */ /* For: iput-quick, iput-object-quick */ /* op vA, vB, offset//CCCC */ lsr w2, wINST, #12 // w2<- B FETCH w1, 1 // w1<- field byte offset GET_VREG w3, w2 // w3<- fp[B], the object pointer ubfx w2, wINST, #8, #4 // w2<- A cmp w3, #0 // check object for null cbz w3, common_errNullObject // object was null GET_VREG w0, w2 // w0<- fp[A] FETCH_ADVANCE_INST 2 // advance rPC, load rINST strh w0, [x3, x1] // obj.field<- w0 GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_iput_short_quick: /* 0xee */ /* File: arm64/op_iput_short_quick.S */ /* File: arm64/op_iput_quick.S */ /* For: iput-quick, iput-object-quick */ /* op vA, vB, offset//CCCC */ lsr w2, wINST, #12 // w2<- B FETCH w1, 1 // w1<- field byte offset GET_VREG w3, w2 // w3<- fp[B], the object pointer ubfx w2, wINST, #8, #4 // w2<- A cmp w3, #0 // check object for null cbz w3, common_errNullObject // object was null GET_VREG w0, w2 // w0<- fp[A] FETCH_ADVANCE_INST 2 // advance rPC, load rINST strh w0, [x3, x1] // obj.field<- w0 GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_iget_boolean_quick: /* 0xef */ /* File: arm64/op_iget_boolean_quick.S */ /* File: arm64/op_iget_quick.S */ /* For: iget-quick, iget-boolean-quick, iget-byte-quick, iget-char-quick, iget-short-quick */ /* op vA, vB, offset//CCCC */ lsr w2, wINST, #12 // w2<- B FETCH w1, 1 // w1<- field byte offset GET_VREG w3, w2 // w3<- object we're operating on ubfx w2, wINST, #8, #4 // w2<- A cmp x3, #0 // check object for null beq common_errNullObject // object was null ldrb w0, [x3, x1] // w0<- obj.field FETCH_ADVANCE_INST 2 // advance rPC, load rINST SET_VREG w0, w2 // fp[A]<- w0 GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_iget_byte_quick: /* 0xf0 */ /* File: arm64/op_iget_byte_quick.S */ /* File: arm64/op_iget_quick.S */ /* For: iget-quick, iget-boolean-quick, iget-byte-quick, iget-char-quick, iget-short-quick */ /* op vA, vB, offset//CCCC */ lsr w2, wINST, #12 // w2<- B FETCH w1, 1 // w1<- field byte offset GET_VREG w3, w2 // w3<- object we're operating on ubfx w2, wINST, #8, #4 // w2<- A cmp x3, #0 // check object for null beq common_errNullObject // object was null ldrsb w0, [x3, x1] // w0<- obj.field FETCH_ADVANCE_INST 2 // advance rPC, load rINST SET_VREG w0, w2 // fp[A]<- w0 GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_iget_char_quick: /* 0xf1 */ /* File: arm64/op_iget_char_quick.S */ /* File: arm64/op_iget_quick.S */ /* For: iget-quick, iget-boolean-quick, iget-byte-quick, iget-char-quick, iget-short-quick */ /* op vA, vB, offset//CCCC */ lsr w2, wINST, #12 // w2<- B FETCH w1, 1 // w1<- field byte offset GET_VREG w3, w2 // w3<- object we're operating on ubfx w2, wINST, #8, #4 // w2<- A cmp x3, #0 // check object for null beq common_errNullObject // object was null ldrh w0, [x3, x1] // w0<- obj.field FETCH_ADVANCE_INST 2 // advance rPC, load rINST SET_VREG w0, w2 // fp[A]<- w0 GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_iget_short_quick: /* 0xf2 */ /* File: arm64/op_iget_short_quick.S */ /* File: arm64/op_iget_quick.S */ /* For: iget-quick, iget-boolean-quick, iget-byte-quick, iget-char-quick, iget-short-quick */ /* op vA, vB, offset//CCCC */ lsr w2, wINST, #12 // w2<- B FETCH w1, 1 // w1<- field byte offset GET_VREG w3, w2 // w3<- object we're operating on ubfx w2, wINST, #8, #4 // w2<- A cmp x3, #0 // check object for null beq common_errNullObject // object was null ldrsh w0, [x3, x1] // w0<- obj.field FETCH_ADVANCE_INST 2 // advance rPC, load rINST SET_VREG w0, w2 // fp[A]<- w0 GET_INST_OPCODE ip // extract opcode from rINST GOTO_OPCODE ip // jump to next instruction /* ------------------------------ */ .balign 128 .L_op_invoke_lambda: /* 0xf3 */ /* Transfer stub to alternate interpreter */ b MterpFallback /* ------------------------------ */ .balign 128 .L_op_unused_f4: /* 0xf4 */ /* File: arm64/op_unused_f4.S */ /* File: arm64/unused.S */ /* * Bail to reference interpreter to throw. */ b MterpFallback /* ------------------------------ */ .balign 128 .L_op_capture_variable: /* 0xf5 */ /* Transfer stub to alternate interpreter */ b MterpFallback /* ------------------------------ */ .balign 128 .L_op_create_lambda: /* 0xf6 */ /* Transfer stub to alternate interpreter */ b MterpFallback /* ------------------------------ */ .balign 128 .L_op_liberate_variable: /* 0xf7 */ /* Transfer stub to alternate interpreter */ b MterpFallback /* ------------------------------ */ .balign 128 .L_op_box_lambda: /* 0xf8 */ /* Transfer stub to alternate interpreter */ b MterpFallback /* ------------------------------ */ .balign 128 .L_op_unbox_lambda: /* 0xf9 */ /* Transfer stub to alternate interpreter */ b MterpFallback /* ------------------------------ */ .balign 128 .L_op_unused_fa: /* 0xfa */ /* File: arm64/op_unused_fa.S */ /* File: arm64/unused.S */ /* * Bail to reference interpreter to throw. */ b MterpFallback /* ------------------------------ */ .balign 128 .L_op_unused_fb: /* 0xfb */ /* File: arm64/op_unused_fb.S */ /* File: arm64/unused.S */ /* * Bail to reference interpreter to throw. */ b MterpFallback /* ------------------------------ */ .balign 128 .L_op_unused_fc: /* 0xfc */ /* File: arm64/op_unused_fc.S */ /* File: arm64/unused.S */ /* * Bail to reference interpreter to throw. */ b MterpFallback /* ------------------------------ */ .balign 128 .L_op_unused_fd: /* 0xfd */ /* File: arm64/op_unused_fd.S */ /* File: arm64/unused.S */ /* * Bail to reference interpreter to throw. */ b MterpFallback /* ------------------------------ */ .balign 128 .L_op_unused_fe: /* 0xfe */ /* File: arm64/op_unused_fe.S */ /* File: arm64/unused.S */ /* * Bail to reference interpreter to throw. */ b MterpFallback /* ------------------------------ */ .balign 128 .L_op_unused_ff: /* 0xff */ /* File: arm64/op_unused_ff.S */ /* File: arm64/unused.S */ /* * Bail to reference interpreter to throw. */ b MterpFallback .balign 128 .size artMterpAsmInstructionStart, .-artMterpAsmInstructionStart .global artMterpAsmInstructionEnd artMterpAsmInstructionEnd: /* * =========================================================================== * Sister implementations * =========================================================================== */ .global artMterpAsmSisterStart .type artMterpAsmSisterStart, %function .text .balign 4 artMterpAsmSisterStart: .size artMterpAsmSisterStart, .-artMterpAsmSisterStart .global artMterpAsmSisterEnd artMterpAsmSisterEnd: .global artMterpAsmAltInstructionStart .type artMterpAsmAltInstructionStart, %function .text artMterpAsmAltInstructionStart = .L_ALT_op_nop /* ------------------------------ */ .balign 128 .L_ALT_op_nop: /* 0x00 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (0 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_move: /* 0x01 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (1 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_move_from16: /* 0x02 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (2 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_move_16: /* 0x03 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (3 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_move_wide: /* 0x04 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (4 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_move_wide_from16: /* 0x05 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (5 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_move_wide_16: /* 0x06 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (6 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_move_object: /* 0x07 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (7 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_move_object_from16: /* 0x08 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (8 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_move_object_16: /* 0x09 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (9 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_move_result: /* 0x0a */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (10 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_move_result_wide: /* 0x0b */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (11 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_move_result_object: /* 0x0c */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (12 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_move_exception: /* 0x0d */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (13 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_return_void: /* 0x0e */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (14 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_return: /* 0x0f */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (15 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_return_wide: /* 0x10 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (16 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_return_object: /* 0x11 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (17 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_const_4: /* 0x12 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (18 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_const_16: /* 0x13 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (19 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_const: /* 0x14 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (20 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_const_high16: /* 0x15 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (21 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_const_wide_16: /* 0x16 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (22 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_const_wide_32: /* 0x17 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (23 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_const_wide: /* 0x18 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (24 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_const_wide_high16: /* 0x19 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (25 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_const_string: /* 0x1a */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (26 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_const_string_jumbo: /* 0x1b */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (27 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_const_class: /* 0x1c */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (28 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_monitor_enter: /* 0x1d */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (29 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_monitor_exit: /* 0x1e */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (30 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_check_cast: /* 0x1f */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (31 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_instance_of: /* 0x20 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (32 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_array_length: /* 0x21 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (33 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_new_instance: /* 0x22 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (34 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_new_array: /* 0x23 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (35 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_filled_new_array: /* 0x24 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (36 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_filled_new_array_range: /* 0x25 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (37 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_fill_array_data: /* 0x26 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (38 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_throw: /* 0x27 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (39 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_goto: /* 0x28 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (40 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_goto_16: /* 0x29 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (41 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_goto_32: /* 0x2a */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (42 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_packed_switch: /* 0x2b */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (43 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_sparse_switch: /* 0x2c */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (44 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_cmpl_float: /* 0x2d */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (45 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_cmpg_float: /* 0x2e */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (46 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_cmpl_double: /* 0x2f */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (47 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_cmpg_double: /* 0x30 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (48 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_cmp_long: /* 0x31 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (49 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_if_eq: /* 0x32 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (50 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_if_ne: /* 0x33 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (51 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_if_lt: /* 0x34 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (52 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_if_ge: /* 0x35 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (53 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_if_gt: /* 0x36 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (54 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_if_le: /* 0x37 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (55 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_if_eqz: /* 0x38 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (56 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_if_nez: /* 0x39 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (57 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_if_ltz: /* 0x3a */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (58 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_if_gez: /* 0x3b */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (59 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_if_gtz: /* 0x3c */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (60 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_if_lez: /* 0x3d */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (61 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_unused_3e: /* 0x3e */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (62 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_unused_3f: /* 0x3f */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (63 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_unused_40: /* 0x40 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (64 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_unused_41: /* 0x41 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (65 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_unused_42: /* 0x42 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (66 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_unused_43: /* 0x43 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (67 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_aget: /* 0x44 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (68 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_aget_wide: /* 0x45 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (69 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_aget_object: /* 0x46 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (70 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_aget_boolean: /* 0x47 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (71 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_aget_byte: /* 0x48 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (72 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_aget_char: /* 0x49 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (73 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_aget_short: /* 0x4a */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (74 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_aput: /* 0x4b */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (75 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_aput_wide: /* 0x4c */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (76 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_aput_object: /* 0x4d */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (77 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_aput_boolean: /* 0x4e */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (78 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_aput_byte: /* 0x4f */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (79 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_aput_char: /* 0x50 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (80 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_aput_short: /* 0x51 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (81 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_iget: /* 0x52 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (82 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_iget_wide: /* 0x53 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (83 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_iget_object: /* 0x54 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (84 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_iget_boolean: /* 0x55 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (85 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_iget_byte: /* 0x56 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (86 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_iget_char: /* 0x57 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (87 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_iget_short: /* 0x58 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (88 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_iput: /* 0x59 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (89 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_iput_wide: /* 0x5a */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (90 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_iput_object: /* 0x5b */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (91 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_iput_boolean: /* 0x5c */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (92 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_iput_byte: /* 0x5d */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (93 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_iput_char: /* 0x5e */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (94 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_iput_short: /* 0x5f */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (95 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_sget: /* 0x60 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (96 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_sget_wide: /* 0x61 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (97 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_sget_object: /* 0x62 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (98 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_sget_boolean: /* 0x63 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (99 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_sget_byte: /* 0x64 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (100 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_sget_char: /* 0x65 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (101 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_sget_short: /* 0x66 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (102 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_sput: /* 0x67 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (103 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_sput_wide: /* 0x68 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (104 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_sput_object: /* 0x69 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (105 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_sput_boolean: /* 0x6a */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (106 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_sput_byte: /* 0x6b */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (107 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_sput_char: /* 0x6c */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (108 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_sput_short: /* 0x6d */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (109 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_invoke_virtual: /* 0x6e */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (110 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_invoke_super: /* 0x6f */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (111 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_invoke_direct: /* 0x70 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (112 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_invoke_static: /* 0x71 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (113 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_invoke_interface: /* 0x72 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (114 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_return_void_no_barrier: /* 0x73 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (115 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_invoke_virtual_range: /* 0x74 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (116 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_invoke_super_range: /* 0x75 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (117 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_invoke_direct_range: /* 0x76 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (118 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_invoke_static_range: /* 0x77 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (119 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_invoke_interface_range: /* 0x78 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (120 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_unused_79: /* 0x79 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (121 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_unused_7a: /* 0x7a */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (122 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_neg_int: /* 0x7b */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (123 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_not_int: /* 0x7c */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (124 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_neg_long: /* 0x7d */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (125 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_not_long: /* 0x7e */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (126 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_neg_float: /* 0x7f */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (127 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_neg_double: /* 0x80 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (128 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_int_to_long: /* 0x81 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (129 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_int_to_float: /* 0x82 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (130 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_int_to_double: /* 0x83 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (131 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_long_to_int: /* 0x84 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (132 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_long_to_float: /* 0x85 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (133 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_long_to_double: /* 0x86 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (134 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_float_to_int: /* 0x87 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (135 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_float_to_long: /* 0x88 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (136 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_float_to_double: /* 0x89 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (137 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_double_to_int: /* 0x8a */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (138 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_double_to_long: /* 0x8b */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (139 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_double_to_float: /* 0x8c */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (140 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_int_to_byte: /* 0x8d */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (141 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_int_to_char: /* 0x8e */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (142 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_int_to_short: /* 0x8f */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (143 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_add_int: /* 0x90 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (144 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_sub_int: /* 0x91 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (145 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_mul_int: /* 0x92 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (146 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_div_int: /* 0x93 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (147 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_rem_int: /* 0x94 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (148 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_and_int: /* 0x95 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (149 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_or_int: /* 0x96 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (150 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_xor_int: /* 0x97 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (151 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_shl_int: /* 0x98 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (152 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_shr_int: /* 0x99 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (153 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_ushr_int: /* 0x9a */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (154 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_add_long: /* 0x9b */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (155 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_sub_long: /* 0x9c */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (156 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_mul_long: /* 0x9d */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (157 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_div_long: /* 0x9e */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (158 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_rem_long: /* 0x9f */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (159 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_and_long: /* 0xa0 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (160 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_or_long: /* 0xa1 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (161 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_xor_long: /* 0xa2 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (162 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_shl_long: /* 0xa3 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (163 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_shr_long: /* 0xa4 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (164 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_ushr_long: /* 0xa5 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (165 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_add_float: /* 0xa6 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (166 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_sub_float: /* 0xa7 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (167 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_mul_float: /* 0xa8 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (168 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_div_float: /* 0xa9 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (169 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_rem_float: /* 0xaa */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (170 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_add_double: /* 0xab */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (171 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_sub_double: /* 0xac */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (172 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_mul_double: /* 0xad */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (173 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_div_double: /* 0xae */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (174 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_rem_double: /* 0xaf */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (175 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_add_int_2addr: /* 0xb0 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (176 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_sub_int_2addr: /* 0xb1 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (177 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_mul_int_2addr: /* 0xb2 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (178 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_div_int_2addr: /* 0xb3 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (179 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_rem_int_2addr: /* 0xb4 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (180 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_and_int_2addr: /* 0xb5 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (181 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_or_int_2addr: /* 0xb6 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (182 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_xor_int_2addr: /* 0xb7 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (183 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_shl_int_2addr: /* 0xb8 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (184 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_shr_int_2addr: /* 0xb9 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (185 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_ushr_int_2addr: /* 0xba */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (186 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_add_long_2addr: /* 0xbb */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (187 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_sub_long_2addr: /* 0xbc */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (188 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_mul_long_2addr: /* 0xbd */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (189 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_div_long_2addr: /* 0xbe */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (190 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_rem_long_2addr: /* 0xbf */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (191 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_and_long_2addr: /* 0xc0 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (192 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_or_long_2addr: /* 0xc1 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (193 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_xor_long_2addr: /* 0xc2 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (194 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_shl_long_2addr: /* 0xc3 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (195 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_shr_long_2addr: /* 0xc4 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (196 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_ushr_long_2addr: /* 0xc5 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (197 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_add_float_2addr: /* 0xc6 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (198 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_sub_float_2addr: /* 0xc7 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (199 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_mul_float_2addr: /* 0xc8 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (200 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_div_float_2addr: /* 0xc9 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (201 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_rem_float_2addr: /* 0xca */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (202 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_add_double_2addr: /* 0xcb */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (203 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_sub_double_2addr: /* 0xcc */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (204 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_mul_double_2addr: /* 0xcd */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (205 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_div_double_2addr: /* 0xce */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (206 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_rem_double_2addr: /* 0xcf */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (207 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_add_int_lit16: /* 0xd0 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (208 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_rsub_int: /* 0xd1 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (209 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_mul_int_lit16: /* 0xd2 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (210 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_div_int_lit16: /* 0xd3 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (211 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_rem_int_lit16: /* 0xd4 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (212 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_and_int_lit16: /* 0xd5 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (213 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_or_int_lit16: /* 0xd6 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (214 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_xor_int_lit16: /* 0xd7 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (215 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_add_int_lit8: /* 0xd8 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (216 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_rsub_int_lit8: /* 0xd9 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (217 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_mul_int_lit8: /* 0xda */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (218 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_div_int_lit8: /* 0xdb */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (219 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_rem_int_lit8: /* 0xdc */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (220 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_and_int_lit8: /* 0xdd */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (221 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_or_int_lit8: /* 0xde */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (222 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_xor_int_lit8: /* 0xdf */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (223 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_shl_int_lit8: /* 0xe0 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (224 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_shr_int_lit8: /* 0xe1 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (225 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_ushr_int_lit8: /* 0xe2 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (226 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_iget_quick: /* 0xe3 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (227 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_iget_wide_quick: /* 0xe4 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (228 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_iget_object_quick: /* 0xe5 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (229 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_iput_quick: /* 0xe6 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (230 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_iput_wide_quick: /* 0xe7 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (231 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_iput_object_quick: /* 0xe8 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (232 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_invoke_virtual_quick: /* 0xe9 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (233 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_invoke_virtual_range_quick: /* 0xea */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (234 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_iput_boolean_quick: /* 0xeb */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (235 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_iput_byte_quick: /* 0xec */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (236 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_iput_char_quick: /* 0xed */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (237 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_iput_short_quick: /* 0xee */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (238 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_iget_boolean_quick: /* 0xef */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (239 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_iget_byte_quick: /* 0xf0 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (240 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_iget_char_quick: /* 0xf1 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (241 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_iget_short_quick: /* 0xf2 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (242 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_invoke_lambda: /* 0xf3 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (243 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_unused_f4: /* 0xf4 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (244 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_capture_variable: /* 0xf5 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (245 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_create_lambda: /* 0xf6 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (246 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_liberate_variable: /* 0xf7 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (247 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_box_lambda: /* 0xf8 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (248 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_unbox_lambda: /* 0xf9 */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (249 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_unused_fa: /* 0xfa */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (250 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_unused_fb: /* 0xfb */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (251 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_unused_fc: /* 0xfc */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (252 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_unused_fd: /* 0xfd */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (253 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_unused_fe: /* 0xfe */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (254 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. /* ------------------------------ */ .balign 128 .L_ALT_op_unused_ff: /* 0xff */ /* File: arm64/alt_stub.S */ /* * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle * any interesting requests and then jump to the real instruction * handler. Note that the call to MterpCheckBefore is done as a tail call. */ .extern MterpCheckBefore EXPORT_PC ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh IBASE. adr lr, artMterpAsmInstructionStart + (255 * 128) // Addr of primary handler. mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME b MterpCheckBefore // (self, shadow_frame) Note: tail call. .balign 128 .size artMterpAsmAltInstructionStart, .-artMterpAsmAltInstructionStart .global artMterpAsmAltInstructionEnd artMterpAsmAltInstructionEnd: /* File: arm64/footer.S */ /* * =========================================================================== * Common subroutines and data * =========================================================================== */ /* * We've detected a condition that will result in an exception, but the exception * has not yet been thrown. Just bail out to the reference interpreter to deal with it. * TUNING: for consistency, we may want to just go ahead and handle these here. */ common_errDivideByZero: EXPORT_PC #if MTERP_LOGGING mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME bl MterpLogDivideByZeroException #endif b MterpCommonFallback common_errArrayIndex: EXPORT_PC #if MTERP_LOGGING mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME bl MterpLogArrayIndexException #endif b MterpCommonFallback common_errNegativeArraySize: EXPORT_PC #if MTERP_LOGGING mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME bl MterpLogNegativeArraySizeException #endif b MterpCommonFallback common_errNoSuchMethod: EXPORT_PC #if MTERP_LOGGING mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME bl MterpLogNoSuchMethodException #endif b MterpCommonFallback common_errNullObject: EXPORT_PC #if MTERP_LOGGING mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME bl MterpLogNullObjectException #endif b MterpCommonFallback common_exceptionThrown: EXPORT_PC #if MTERP_LOGGING mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME bl MterpLogExceptionThrownException #endif b MterpCommonFallback MterpSuspendFallback: EXPORT_PC #if MTERP_LOGGING mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME ldr x2, [xSELF, #THREAD_FLAGS_OFFSET] bl MterpLogSuspendFallback #endif b MterpCommonFallback /* * If we're here, something is out of the ordinary. If there is a pending * exception, handle it. Otherwise, roll back and retry with the reference * interpreter. */ MterpPossibleException: ldr x0, [xSELF, #THREAD_EXCEPTION_OFFSET] cbz x0, MterpFallback // If not, fall back to reference interpreter. /* intentional fallthrough - handle pending exception. */ /* * On return from a runtime helper routine, we've found a pending exception. * Can we handle it here - or need to bail out to caller? * */ MterpException: mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME bl MterpHandleException // (self, shadow_frame) cbz w0, MterpExceptionReturn // no local catch, back to caller. ldr x0, [xFP, #OFF_FP_CODE_ITEM] ldr w1, [xFP, #OFF_FP_DEX_PC] ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] add xPC, x0, #CODEITEM_INSNS_OFFSET add xPC, xPC, x1, lsl #1 // generate new dex_pc_ptr /* Do we need to switch interpreters? */ bl MterpShouldSwitchInterpreters cbnz w0, MterpFallback /* resume execution at catch block */ EXPORT_PC FETCH_INST GET_INST_OPCODE ip GOTO_OPCODE ip /* NOTE: no fallthrough */ /* * Common handling for branches with support for Jit profiling. * On entry: * wINST <= signed offset * wPROFILE <= signed hotness countdown (expanded to 32 bits) * condition bits <= set to establish sign of offset (use "NoFlags" entry if not) * * We have quite a few different cases for branch profiling, OSR detection and * suspend check support here. * * Taken backward branches: * If profiling active, do hotness countdown and report if we hit zero. * If in osr check mode, see if our target is a compiled loop header entry and do OSR if so. * Is there a pending suspend request? If so, suspend. * * Taken forward branches and not-taken backward branches: * If in osr check mode, see if our target is a compiled loop header entry and do OSR if so. * * Our most common case is expected to be a taken backward branch with active jit profiling, * but no full OSR check and no pending suspend request. * Next most common case is not-taken branch with no full OSR check. * */ MterpCommonTakenBranchNoFlags: cmp wINST, #0 b.gt .L_forward_branch // don't add forward branches to hotness tbnz wPROFILE, #31, .L_no_count_backwards // go if negative subs wPROFILE, wPROFILE, #1 // countdown b.eq .L_add_batch // counted down to zero - report .L_resume_backward_branch: ldr lr, [xSELF, #THREAD_FLAGS_OFFSET] add w2, wINST, wINST // w2<- byte offset FETCH_ADVANCE_INST_RB w2 // update rPC, load wINST REFRESH_IBASE ands lr, lr, #(THREAD_SUSPEND_REQUEST | THREAD_CHECKPOINT_REQUEST) b.ne .L_suspend_request_pending GET_INST_OPCODE ip // extract opcode from wINST GOTO_OPCODE ip // jump to next instruction .L_suspend_request_pending: EXPORT_PC mov x0, xSELF bl MterpSuspendCheck // (self) cbnz x0, MterpFallback REFRESH_IBASE // might have changed during suspend GET_INST_OPCODE ip // extract opcode from wINST GOTO_OPCODE ip // jump to next instruction .L_no_count_backwards: cmp wPROFILE, #JIT_CHECK_OSR // possible OSR re-entry? b.ne .L_resume_backward_branch mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME mov x2, xINST EXPORT_PC bl MterpMaybeDoOnStackReplacement // (self, shadow_frame, offset) cbnz x0, MterpOnStackReplacement b .L_resume_backward_branch .L_forward_branch: cmp wPROFILE, #JIT_CHECK_OSR // possible OSR re-entry? b.eq .L_check_osr_forward .L_resume_forward_branch: add w2, wINST, wINST // w2<- byte offset FETCH_ADVANCE_INST_RB w2 // update rPC, load wINST GET_INST_OPCODE ip // extract opcode from wINST GOTO_OPCODE ip // jump to next instruction .L_check_osr_forward: mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME mov x2, xINST EXPORT_PC bl MterpMaybeDoOnStackReplacement // (self, shadow_frame, offset) cbnz x0, MterpOnStackReplacement b .L_resume_forward_branch .L_add_batch: add x1, xFP, #OFF_FP_SHADOWFRAME strh wPROFILE, [x1, #SHADOWFRAME_HOTNESS_COUNTDOWN_OFFSET] ldr x0, [xFP, #OFF_FP_METHOD] mov x2, xSELF bl MterpAddHotnessBatch // (method, shadow_frame, self) mov wPROFILE, w0 // restore new hotness countdown to wPROFILE b .L_no_count_backwards /* * Entered from the conditional branch handlers when OSR check request active on * not-taken path. All Dalvik not-taken conditional branch offsets are 2. */ .L_check_not_taken_osr: mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME mov x2, #2 EXPORT_PC bl MterpMaybeDoOnStackReplacement // (self, shadow_frame, offset) cbnz x0, MterpOnStackReplacement FETCH_ADVANCE_INST 2 GET_INST_OPCODE ip // extract opcode from wINST GOTO_OPCODE ip // jump to next instruction /* * Check for suspend check request. Assumes wINST already loaded, xPC advanced and * still needs to get the opcode and branch to it, and flags are in lr. */ MterpCheckSuspendAndContinue: ldr xIBASE, [xSELF, #THREAD_CURRENT_IBASE_OFFSET] // refresh xIBASE ands w7, w7, #(THREAD_SUSPEND_REQUEST | THREAD_CHECKPOINT_REQUEST) b.ne check1 GET_INST_OPCODE ip // extract opcode from wINST GOTO_OPCODE ip // jump to next instruction check1: EXPORT_PC mov x0, xSELF bl MterpSuspendCheck // (self) cbnz x0, MterpFallback // Something in the environment changed, switch interpreters GET_INST_OPCODE ip // extract opcode from wINST GOTO_OPCODE ip // jump to next instruction /* * On-stack replacement has happened, and now we've returned from the compiled method. */ MterpOnStackReplacement: #if MTERP_LOGGING mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME sbfm x2, xINST, 0, 31 bl MterpLogOSR #endif mov x0, #1 // Signal normal return b MterpDone /* * Bail out to reference interpreter. */ MterpFallback: EXPORT_PC #if MTERP_LOGGING mov x0, xSELF add x1, xFP, #OFF_FP_SHADOWFRAME bl MterpLogFallback #endif MterpCommonFallback: mov x0, #0 // signal retry with reference interpreter. b MterpDone /* * We pushed some registers on the stack in ExecuteMterpImpl, then saved * SP and LR. Here we restore SP, restore the registers, and then restore * LR to PC. * * On entry: * uint32_t* xFP (should still be live, pointer to base of vregs) */ MterpExceptionReturn: mov x0, #1 // signal return to caller. b MterpDone MterpReturn: ldr x2, [xFP, #OFF_FP_RESULT_REGISTER] ldr lr, [xSELF, #THREAD_FLAGS_OFFSET] str x0, [x2] mov x0, xSELF ands lr, lr, #(THREAD_SUSPEND_REQUEST | THREAD_CHECKPOINT_REQUEST) b.eq check2 bl MterpSuspendCheck // (self) check2: mov x0, #1 // signal return to caller. MterpDone: /* * At this point, we expect wPROFILE to be non-zero. If negative, hotness is disabled or we're * checking for OSR. If greater than zero, we might have unreported hotness to register * (the difference between the ending wPROFILE and the cached hotness counter). wPROFILE * should only reach zero immediately after a hotness decrement, and is then reset to either * a negative special state or the new non-zero countdown value. */ cmp wPROFILE, #0 bgt MterpProfileActive // if > 0, we may have some counts to report. ldp fp, lr, [sp, #64] ldp xPC, xFP, [sp, #48] ldp xSELF, xINST, [sp, #32] ldp xIBASE, xREFS, [sp, #16] ldp xPROFILE, x27, [sp], #80 ret MterpProfileActive: mov xINST, x0 // stash return value /* Report cached hotness counts */ ldr x0, [xFP, #OFF_FP_METHOD] add x1, xFP, #OFF_FP_SHADOWFRAME mov x2, xSELF strh wPROFILE, [x1, #SHADOWFRAME_HOTNESS_COUNTDOWN_OFFSET] bl MterpAddHotnessBatch // (method, shadow_frame, self) mov x0, xINST // restore return value ldp fp, lr, [sp, #64] ldp xPC, xFP, [sp, #48] ldp xSELF, xINST, [sp, #32] ldp xIBASE, xREFS, [sp, #16] ldp xPROFILE, x27, [sp], #80 ret .cfi_endproc .size ExecuteMterpImpl, .-ExecuteMterpImpl