/****************************************************************************** * * Copyright (C) 1999-2012 Broadcom Corporation * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at: * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * ******************************************************************************/ #ifndef __CONFIG_H #define __CONFIG_H #ifdef __cplusplus extern "C" { #endif int GetStrValue(const char* name, char* p_value, unsigned long len); int GetNumValue(const char* name, void* p_value, unsigned long len); #ifdef __cplusplus }; #endif #define NAME_POLLING_TECH_MASK "POLLING_TECH_MASK" #define NAME_REGISTER_VIRTUAL_SE "REGISTER_VIRTUAL_SE" #define NAME_APPL_TRACE_LEVEL "APPL_TRACE_LEVEL" #define NAME_USE_RAW_NCI_TRACE "USE_RAW_NCI_TRACE" #define NAME_LOGCAT_FILTER "LOGCAT_FILTER" #define NAME_LPTD_CFG "LPTD_CFG" #define NAME_SCREEN_OFF_POWER_STATE "SCREEN_OFF_POWER_STATE" #define NAME_PREINIT_DSP_CFG "PREINIT_DSP_CFG" #define NAME_DTA_START_CFG "DTA_START_CFG" #define NAME_TRANSPORT_DRIVER "TRANSPORT_DRIVER" #define NAME_POWER_CONTROL_DRIVER "POWER_CONTROL_DRIVER" #define NAME_PROTOCOL_TRACE_LEVEL "PROTOCOL_TRACE_LEVEL" #define NAME_UART_PORT "UART_PORT" #define NAME_UART_BAUD "UART_BAUD" #define NAME_UART_PARITY "UART_PARITY" #define NAME_UART_STOPBITS "UART_STOPBITS" #define NAME_UART_DATABITS "UART_DATABITS" #define NAME_CLIENT_ADDRESS "BCMI2CNFC_ADDRESS" #define NAME_NFA_DM_START_UP_CFG "NFA_DM_START_UP_CFG" #define NAME_NFA_DM_CFG "NFA_DM_CFG" #define NAME_NFA_DM_LP_CFG "NFA_DM_LP_CFG" #define NAME_LOW_SPEED_TRANSPORT "LOW_SPEED_TRANSPORT" #define NAME_NFC_WAKE_DELAY "NFC_WAKE_DELAY" #define NAME_NFC_WRITE_DELAY "NFC_WRITE_DELAY" #define NAME_PERF_MEASURE_FREQ "REPORT_PERFORMANCE_MEASURE" #define NAME_READ_MULTI_PACKETS "READ_MULTIPLE_PACKETS" #define NAME_POWER_ON_DELAY "POWER_ON_DELAY" #define NAME_PRE_POWER_OFF_DELAY "PRE_POWER_OFF_DELAY" #define NAME_POST_POWER_OFF_DELAY "POST_POWER_OFF_DELAY" #define NAME_CE3_PRE_POWER_OFF_DELAY "CE3_PRE_POWER_OFF_DELAY" #define NAME_NFA_STORAGE "NFA_STORAGE" #define NAME_NFA_DM_START_UP_VSC_CFG "NFA_DM_START_UP_VSC_CFG" #define NAME_NFA_DTA_START_UP_VSC_CFG "NFA_DTA_START_UP_VSC_CFG" #define NAME_UICC_LISTEN_TECH_MASK "UICC_LISTEN_TECH_MASK" #define NAME_UICC_LISTEN_TECH_EX_MASK "UICC_LISTEN_TECH_EXCLUDE_MASK" #define NAME_SNOOZE_MODE_CFG "SNOOZE_MODE_CFG" #define NAME_NFA_DM_DISC_DURATION_POLL "NFA_DM_DISC_DURATION_POLL" #define NAME_SPD_DEBUG "SPD_DEBUG" #define NAME_SPD_MAXRETRYCOUNT "SPD_MAX_RETRY_COUNT" #define NAME_SPI_NEGOTIATION "SPI_NEGOTIATION" #define NAME_AID_FOR_EMPTY_SELECT "AID_FOR_EMPTY_SELECT" #define NAME_PRESERVE_STORAGE "PRESERVE_STORAGE" #define NAME_NFA_MAX_EE_SUPPORTED "NFA_MAX_EE_SUPPORTED" #define NAME_NFCC_ENABLE_TIMEOUT "NFCC_ENABLE_TIMEOUT" #define NAME_NFA_DM_PRE_DISCOVERY_CFG "NFA_DM_PRE_DISCOVERY_CFG" #define NAME_POLL_FREQUENCY "POLL_FREQUENCY" #define NAME_XTAL_HARDWARE_ID "XTAL_HARDWARE_ID" #define NAME_XTAL_FREQUENCY "XTAL_FREQUENCY" #define NAME_XTAL_FREQ_INDEX "XTAL_FREQ_INDEX" #define NAME_XTAL_PARAMS_CFG "XTAL_PARAMS_CFG" #define NAME_EXCLUSIVE_SE_ACCESS "EXCLUSIVE_SE_ACCESS" #define NAME_DBG_NO_UICC_IDLE_TIMEOUT_TOGGLING "DBG_NO_UICC_IDLE_TIMEOUT_TOGGLING" #define NAME_PRESENCE_CHECK_ALGORITHM "PRESENCE_CHECK_ALGORITHM" #define NAME_ALLOW_NO_NVM "ALLOW_NO_NVM" #define NAME_DEVICE_HOST_WHITE_LIST "DEVICE_HOST_WHITE_LIST" #define NAME_POWER_OFF_MODE "POWER_OFF_MODE" #define NAME_GLOBAL_RESET "DO_GLOBAL_RESET" #define NAME_NCI_HAL_MODULE "NCI_HAL_MODULE" #define NAME_NFA_POLL_BAIL_OUT_MODE "NFA_POLL_BAIL_OUT_MODE" #define NAME_NFA_PROPRIETARY_CFG "NFA_PROPRIETARY_CFG" #define LPTD_PARAM_LEN (40) // default configuration #define default_transport "/dev/bcm2079x" #define default_storage_location "/data/nfc" struct tUART_CONFIG { int m_iBaudrate; // 115200 int m_iDatabits; // 8 int m_iParity; // 0 - none, 1 = odd, 2 = even int m_iStopbits; }; extern struct tUART_CONFIG uartConfig; #define MAX_CHIPID_LEN (16) void readOptionalConfig(const char* option); /* Snooze mode configuration structure */ typedef struct { unsigned char snooze_mode; /* Snooze Mode */ unsigned char idle_threshold_dh; /* Idle Threshold Host */ unsigned char idle_threshold_nfcc; /* Idle Threshold NFCC */ unsigned char nfc_wake_active_mode; /* NFC_LP_ACTIVE_LOW or NFC_LP_ACTIVE_HIGH */ unsigned char dh_wake_active_mode; /* NFC_LP_ACTIVE_LOW or NFC_LP_ACTIVE_HIGH */ } tSNOOZE_MODE_CONFIG; #endif