/****************************************************************************** * * Copyright (C) 2006-2012 Broadcom Corporation * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at: * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * ******************************************************************************/ /****************************************************************************** * * This file contains action functions for BTA JV APIs. * ******************************************************************************/ #include #include #include #include #include #include "osi/include/allocator.h" #include "bt_types.h" #include "bt_common.h" #include "utl.h" #include "bta_sys.h" #include "bta_api.h" #include "bta_jv_api.h" #include "bta_jv_int.h" #include "bta_jv_co.h" #include "btm_api.h" #include "btm_int.h" #include "sdp_api.h" #include "l2c_api.h" #include "port_api.h" #include "rfcdefs.h" #include "avct_api.h" #include "avdt_api.h" #include "gap_api.h" #include "l2c_api.h" #include "osi/include/osi.h" /* one of these exists for each client */ struct fc_client { struct fc_client *next_all_list; struct fc_client *next_chan_list; BD_ADDR remote_addr; uint32_t id; tBTA_JV_L2CAP_CBACK *p_cback; void *user_data; uint16_t handle; uint16_t chan; uint8_t sec_id; unsigned server : 1; unsigned init_called : 1; }; /* one of these exists for each channel we're dealing with */ struct fc_channel { struct fc_channel *next; struct fc_client *clients; uint8_t has_server : 1; uint16_t chan; }; static struct fc_client *fc_clients; static struct fc_channel *fc_channels; static uint32_t fc_next_id; static void fcchan_conn_chng_cbk(UINT16 chan, BD_ADDR bd_addr, BOOLEAN connected, UINT16 reason, tBT_TRANSPORT ); static void fcchan_data_cbk(UINT16 chan, BD_ADDR bd_addr, BT_HDR *p_buf); extern void uuid_to_string_legacy(bt_uuid_t *p_uuid, char *str); static inline void logu(const char* title, const uint8_t * p_uuid) { char uuids[128]; uuid_to_string_legacy((bt_uuid_t*)p_uuid, uuids); APPL_TRACE_DEBUG("%s: %s", title, uuids); } static tBTA_JV_PCB * bta_jv_add_rfc_port(tBTA_JV_RFC_CB *p_cb, tBTA_JV_PCB *p_pcb_open); static tBTA_JV_STATUS bta_jv_free_set_pm_profile_cb(UINT32 jv_handle); static void bta_jv_pm_conn_busy(tBTA_JV_PM_CB *p_cb); static void bta_jv_pm_conn_idle(tBTA_JV_PM_CB *p_cb); static void bta_jv_pm_state_change(tBTA_JV_PM_CB *p_cb, const tBTA_JV_CONN_STATE state); tBTA_JV_STATUS bta_jv_set_pm_conn_state(tBTA_JV_PM_CB *p_cb, const tBTA_JV_CONN_STATE new_st); /******************************************************************************* ** ** Function bta_jv_alloc_sec_id ** ** Description allocate a security id ** ** Returns ** *******************************************************************************/ UINT8 bta_jv_alloc_sec_id(void) { UINT8 ret = 0; int i; for(i=0; i= BTA_JV_FIRST_SERVICE_ID && sec_id <= BTA_JV_LAST_SERVICE_ID) { BTM_SecClrService(sec_id); bta_jv_cb.sec_id[sec_id - BTA_JV_FIRST_SERVICE_ID] = 0; } } /******************************************************************************* ** ** Function bta_jv_alloc_rfc_cb ** ** Description allocate a control block for the given port handle ** ** Returns ** *******************************************************************************/ tBTA_JV_RFC_CB * bta_jv_alloc_rfc_cb(UINT16 port_handle, tBTA_JV_PCB **pp_pcb) { tBTA_JV_RFC_CB *p_cb = NULL; tBTA_JV_PCB *p_pcb; int i, j; for(i=0; ihandle = (i + 1) | BTA_JV_RFCOMM_MASK; p_cb->max_sess = 1; p_cb->curr_sess = 1; for (j = 0; j < BTA_JV_MAX_RFC_SR_SESSION; j++) p_cb->rfc_hdl[j] = 0; p_cb->rfc_hdl[0] = port_handle; APPL_TRACE_DEBUG( "bta_jv_alloc_rfc_cb port_handle:%d handle:0x%2x", port_handle, p_cb->handle); p_pcb = &bta_jv_cb.port_cb[port_handle - 1]; p_pcb->handle = p_cb->handle; p_pcb->port_handle = port_handle; p_pcb->p_pm_cb = NULL; *pp_pcb = p_pcb; break; } } if(p_cb == NULL) { APPL_TRACE_ERROR( "bta_jv_alloc_rfc_cb: port_handle:%d, ctrl block exceeds " "limit:%d", port_handle, BTA_JV_MAX_RFC_CONN); } return p_cb; } /******************************************************************************* ** ** Function bta_jv_rfc_port_to_pcb ** ** Description find the port control block associated with the given port handle ** ** Returns ** *******************************************************************************/ tBTA_JV_PCB * bta_jv_rfc_port_to_pcb(UINT16 port_handle) { tBTA_JV_PCB *p_pcb = NULL; if ((port_handle > 0) && (port_handle <= MAX_RFC_PORTS) && bta_jv_cb.port_cb[port_handle - 1].handle) { p_pcb = &bta_jv_cb.port_cb[port_handle - 1]; } return p_pcb; } /******************************************************************************* ** ** Function bta_jv_rfc_port_to_cb ** ** Description find the RFCOMM control block associated with the given port handle ** ** Returns ** *******************************************************************************/ tBTA_JV_RFC_CB * bta_jv_rfc_port_to_cb(UINT16 port_handle) { tBTA_JV_RFC_CB *p_cb = NULL; UINT32 handle; if ((port_handle > 0) && (port_handle <= MAX_RFC_PORTS) && bta_jv_cb.port_cb[port_handle - 1].handle) { handle = bta_jv_cb.port_cb[port_handle - 1].handle; handle &= BTA_JV_RFC_HDL_MASK; handle &= ~BTA_JV_RFCOMM_MASK; if (handle) p_cb = &bta_jv_cb.rfc_cb[handle - 1]; } else { APPL_TRACE_WARNING("bta_jv_rfc_port_to_cb(port_handle:0x%x):jv handle:0x%x not" " FOUND", port_handle, bta_jv_cb.port_cb[port_handle - 1].handle); } return p_cb; } static tBTA_JV_STATUS bta_jv_free_rfc_cb(tBTA_JV_RFC_CB *p_cb, tBTA_JV_PCB *p_pcb) { tBTA_JV_STATUS status = BTA_JV_SUCCESS; BOOLEAN remove_server = FALSE; int close_pending = 0; if (!p_cb || !p_pcb) { APPL_TRACE_ERROR("bta_jv_free_sr_rfc_cb, p_cb or p_pcb cannot be null"); return BTA_JV_FAILURE; } APPL_TRACE_DEBUG("bta_jv_free_sr_rfc_cb: max_sess:%d, curr_sess:%d, p_pcb:%p, user:" "%p, state:%d, jv handle: 0x%x" ,p_cb->max_sess, p_cb->curr_sess, p_pcb, p_pcb->user_data, p_pcb->state, p_pcb->handle); if (p_cb->curr_sess <= 0) return BTA_JV_SUCCESS; switch (p_pcb->state) { case BTA_JV_ST_CL_CLOSING: case BTA_JV_ST_SR_CLOSING: APPL_TRACE_WARNING("bta_jv_free_sr_rfc_cb: return on closing, port state:%d, " "scn:%d, p_pcb:%p, user_data:%p", p_pcb->state, p_cb->scn, p_pcb, p_pcb->user_data); status = BTA_JV_FAILURE; return status; case BTA_JV_ST_CL_OPEN: case BTA_JV_ST_CL_OPENING: APPL_TRACE_DEBUG("bta_jv_free_sr_rfc_cb: state: %d, scn:%d," " user_data:%p", p_pcb->state, p_cb->scn, p_pcb->user_data); p_pcb->state = BTA_JV_ST_CL_CLOSING; break; case BTA_JV_ST_SR_LISTEN: p_pcb->state = BTA_JV_ST_SR_CLOSING; remove_server = TRUE; APPL_TRACE_DEBUG("bta_jv_free_sr_rfc_cb: state: BTA_JV_ST_SR_LISTEN, scn:%d," " user_data:%p", p_cb->scn, p_pcb->user_data); break; case BTA_JV_ST_SR_OPEN: p_pcb->state = BTA_JV_ST_SR_CLOSING; APPL_TRACE_DEBUG("bta_jv_free_sr_rfc_cb: state: BTA_JV_ST_SR_OPEN, scn:%d," " user_data:%p", p_cb->scn, p_pcb->user_data); break; default: APPL_TRACE_WARNING("bta_jv_free_sr_rfc_cb():failed, ignore port state:%d, scn:" "%d, p_pcb:%p, jv handle: 0x%x, port_handle: %d, user_data:%p", p_pcb->state, p_cb->scn, p_pcb, p_pcb->handle, p_pcb->port_handle, p_pcb->user_data); status = BTA_JV_FAILURE; break; } if (BTA_JV_SUCCESS == status) { int port_status; if (!remove_server) port_status = RFCOMM_RemoveConnection(p_pcb->port_handle); else port_status = RFCOMM_RemoveServer(p_pcb->port_handle); if (port_status != PORT_SUCCESS) { status = BTA_JV_FAILURE; APPL_TRACE_WARNING("bta_jv_free_rfc_cb(jv handle: 0x%x, state %d)::" "port_status: %d, port_handle: %d, close_pending: %d:Remove", p_pcb->handle, p_pcb->state, port_status, p_pcb->port_handle, close_pending); } } if (!close_pending) { p_pcb->port_handle = 0; p_pcb->state = BTA_JV_ST_NONE; bta_jv_free_set_pm_profile_cb(p_pcb->handle); //Initialize congestion flags p_pcb->cong = FALSE; p_pcb->user_data = 0; int si = BTA_JV_RFC_HDL_TO_SIDX(p_pcb->handle); if (0 <= si && si < BTA_JV_MAX_RFC_SR_SESSION) p_cb->rfc_hdl[si] = 0; p_pcb->handle = 0; p_cb->curr_sess--; if (p_cb->curr_sess == 0) { p_cb->scn = 0; bta_jv_free_sec_id(&p_cb->sec_id); p_cb->p_cback = NULL; p_cb->handle = 0; p_cb->curr_sess = -1; } if (remove_server) { bta_jv_free_sec_id(&p_cb->sec_id); } } return status; } /******************************************************************************* ** ** Function bta_jv_free_l2c_cb ** ** Description free the given L2CAP control block ** ** Returns ** *******************************************************************************/ tBTA_JV_STATUS bta_jv_free_l2c_cb(tBTA_JV_L2C_CB *p_cb) { tBTA_JV_STATUS status = BTA_JV_SUCCESS; if(BTA_JV_ST_NONE != p_cb->state) { bta_jv_free_set_pm_profile_cb((UINT32)p_cb->handle); if (GAP_ConnClose(p_cb->handle) != BT_PASS) status = BTA_JV_FAILURE; } p_cb->psm = 0; p_cb->state = BTA_JV_ST_NONE; p_cb->cong = FALSE; bta_jv_free_sec_id(&p_cb->sec_id); p_cb->p_cback = NULL; return status; } /******************************************************************************* ** ** ** Function bta_jv_clear_pm_cb ** ** Description clears jv pm control block and optionally calls bta_sys_conn_close() ** In general close_conn should be set to TRUE to remove registering with ** dm pm! ** ** WARNING: Make sure to clear pointer form port or l2c to this control block too! ** *******************************************************************************/ static void bta_jv_clear_pm_cb(tBTA_JV_PM_CB *p_pm_cb, BOOLEAN close_conn) { /* needs to be called if registered with bta pm, otherwise we may run out of dm pm slots! */ if (close_conn) bta_sys_conn_close(BTA_ID_JV, p_pm_cb->app_id, p_pm_cb->peer_bd_addr); p_pm_cb->state = BTA_JV_PM_FREE_ST; p_pm_cb->app_id = BTA_JV_PM_ALL; p_pm_cb->handle = BTA_JV_PM_HANDLE_CLEAR; bdcpy(p_pm_cb->peer_bd_addr, bd_addr_null); } /******************************************************************************* ** ** Function bta_jv_free_set_pm_profile_cb ** ** Description free pm profile control block ** ** Returns BTA_JV_SUCCESS if cb has been freed correctly, ** BTA_JV_FAILURE in case of no profile has been registered or already freed ** *******************************************************************************/ static tBTA_JV_STATUS bta_jv_free_set_pm_profile_cb(UINT32 jv_handle) { tBTA_JV_STATUS status = BTA_JV_FAILURE; tBTA_JV_PM_CB **p_cb; int i, j, bd_counter = 0, appid_counter = 0; for (i = 0; i < BTA_JV_PM_MAX_NUM; i++) { p_cb = NULL; if ((bta_jv_cb.pm_cb[i].state != BTA_JV_PM_FREE_ST) && (jv_handle == bta_jv_cb.pm_cb[i].handle)) { for (j = 0; j < BTA_JV_PM_MAX_NUM; j++) { if (bdcmp(bta_jv_cb.pm_cb[j].peer_bd_addr, bta_jv_cb.pm_cb[i].peer_bd_addr) == 0) bd_counter++; if (bta_jv_cb.pm_cb[j].app_id == bta_jv_cb.pm_cb[i].app_id) appid_counter++; } APPL_TRACE_API("%s(jv_handle: 0x%2x), idx: %d, " "app_id: 0x%x",__func__, jv_handle, i, bta_jv_cb.pm_cb[i].app_id); APPL_TRACE_API("%s, bd_counter = %d, " "appid_counter = %d", __func__, bd_counter, appid_counter); if (bd_counter > 1) { bta_jv_pm_conn_idle(&bta_jv_cb.pm_cb[i]); } if (bd_counter <= 1 || (appid_counter <= 1)) { bta_jv_clear_pm_cb(&bta_jv_cb.pm_cb[i], TRUE); } else { bta_jv_clear_pm_cb(&bta_jv_cb.pm_cb[i], FALSE); } if (BTA_JV_RFCOMM_MASK & jv_handle) { UINT32 hi = ((jv_handle & BTA_JV_RFC_HDL_MASK) & ~BTA_JV_RFCOMM_MASK) - 1; UINT32 si = BTA_JV_RFC_HDL_TO_SIDX(jv_handle); if (hi < BTA_JV_MAX_RFC_CONN && bta_jv_cb.rfc_cb[hi].p_cback && si < BTA_JV_MAX_RFC_SR_SESSION && bta_jv_cb.rfc_cb[hi].rfc_hdl[si]) { tBTA_JV_PCB *p_pcb = bta_jv_rfc_port_to_pcb(bta_jv_cb.rfc_cb[hi].rfc_hdl[si]); if (p_pcb) { if (NULL == p_pcb->p_pm_cb) APPL_TRACE_WARNING("%s(jv_handle:" " 0x%x):port_handle: 0x%x, p_pm_cb: %d: no link to " "pm_cb?", __func__, jv_handle, p_pcb->port_handle, i); p_cb = &p_pcb->p_pm_cb; } } } else { if (jv_handle < BTA_JV_MAX_L2C_CONN) { tBTA_JV_L2C_CB *p_l2c_cb = &bta_jv_cb.l2c_cb[jv_handle]; if (NULL == p_l2c_cb->p_pm_cb) APPL_TRACE_WARNING("%s(jv_handle: " "0x%x): p_pm_cb: %d: no link to pm_cb?", __func__, jv_handle, i); p_cb = &p_l2c_cb->p_pm_cb; } } if (p_cb) { *p_cb = NULL; status = BTA_JV_SUCCESS; } } } return status; } /******************************************************************************* ** ** Function bta_jv_alloc_set_pm_profile_cb ** ** Description set PM profile control block ** ** Returns pointer to allocated cb or NULL in case of failure ** *******************************************************************************/ static tBTA_JV_PM_CB *bta_jv_alloc_set_pm_profile_cb(UINT32 jv_handle, tBTA_JV_PM_ID app_id) { BOOLEAN bRfcHandle = (jv_handle & BTA_JV_RFCOMM_MASK) != 0; BD_ADDR peer_bd_addr; int i, j; tBTA_JV_PM_CB **pp_cb; for (i = 0; i < BTA_JV_PM_MAX_NUM; i++) { pp_cb = NULL; if (bta_jv_cb.pm_cb[i].state == BTA_JV_PM_FREE_ST) { /* rfc handle bd addr retrieval requires core stack handle */ if (bRfcHandle) { for (j = 0; j < BTA_JV_MAX_RFC_CONN; j++) { if (jv_handle == bta_jv_cb.port_cb[j].handle) { pp_cb = &bta_jv_cb.port_cb[j].p_pm_cb; if (PORT_SUCCESS != PORT_CheckConnection( bta_jv_cb.port_cb[j].port_handle, peer_bd_addr, NULL)) i = BTA_JV_PM_MAX_NUM; break; } } } else { /* use jv handle for l2cap bd address retrieval */ for (j = 0; j < BTA_JV_MAX_L2C_CONN; j++) { if (jv_handle == bta_jv_cb.l2c_cb[j].handle) { pp_cb = &bta_jv_cb.l2c_cb[j].p_pm_cb; UINT8 *p_bd_addr = GAP_ConnGetRemoteAddr((UINT16)jv_handle); if (NULL != p_bd_addr) bdcpy(peer_bd_addr, p_bd_addr); else i = BTA_JV_PM_MAX_NUM; break; } } } APPL_TRACE_API("bta_jv_alloc_set_pm_profile_cb(handle 0x%2x, app_id %d): " "idx: %d, (BTA_JV_PM_MAX_NUM: %d), pp_cb: 0x%x", jv_handle, app_id, i, BTA_JV_PM_MAX_NUM, pp_cb); break; } } if ((i != BTA_JV_PM_MAX_NUM) && (NULL != pp_cb)) { *pp_cb = &bta_jv_cb.pm_cb[i]; bta_jv_cb.pm_cb[i].handle = jv_handle; bta_jv_cb.pm_cb[i].app_id = app_id; bdcpy(bta_jv_cb.pm_cb[i].peer_bd_addr, peer_bd_addr); bta_jv_cb.pm_cb[i].state = BTA_JV_PM_IDLE_ST; return &bta_jv_cb.pm_cb[i]; } APPL_TRACE_WARNING("bta_jv_alloc_set_pm_profile_cb(jv_handle: 0x%x, app_id: %d) " "return NULL", jv_handle, app_id); return (tBTA_JV_PM_CB *)NULL; } /******************************************************************************* ** ** Function bta_jv_check_psm ** ** Description for now use only the legal PSM per JSR82 spec ** ** Returns TRUE, if allowed ** *******************************************************************************/ BOOLEAN bta_jv_check_psm(UINT16 psm) { BOOLEAN ret = FALSE; if (L2C_IS_VALID_PSM(psm)) { if (psm < 0x1001) { /* see if this is defined by spec */ switch (psm) { case SDP_PSM: /* 1 */ case BT_PSM_RFCOMM: /* 3 */ /* do not allow java app to use these 2 PSMs */ break; case TCS_PSM_INTERCOM: /* 5 */ case TCS_PSM_CORDLESS: /* 7 */ if( FALSE == bta_sys_is_register(BTA_ID_CT) && FALSE == bta_sys_is_register(BTA_ID_CG) ) ret = TRUE; break; case BT_PSM_BNEP: /* F */ if(FALSE == bta_sys_is_register(BTA_ID_PAN)) ret = TRUE; break; case HID_PSM_CONTROL: /* 0x11 */ case HID_PSM_INTERRUPT: /* 0x13 */ //FIX: allow HID Device and HID Host to coexist if( FALSE == bta_sys_is_register(BTA_ID_HD) || FALSE == bta_sys_is_register(BTA_ID_HH) ) ret = TRUE; break; case AVCT_PSM: /* 0x17 */ case AVDT_PSM: /* 0x19 */ if ((FALSE == bta_sys_is_register(BTA_ID_AV)) && (FALSE == bta_sys_is_register(BTA_ID_AVK))) ret = TRUE; break; default: ret = TRUE; break; } } else { ret = TRUE; } } return ret; } /******************************************************************************* ** ** Function bta_jv_enable ** ** Description Initialises the JAVA I/F ** ** Returns void ** *******************************************************************************/ void bta_jv_enable(tBTA_JV_MSG *p_data) { tBTA_JV_STATUS status = BTA_JV_SUCCESS; bta_jv_cb.p_dm_cback = p_data->enable.p_cback; bta_jv_cb.p_dm_cback(BTA_JV_ENABLE_EVT, (tBTA_JV *)&status, 0); memset(bta_jv_cb.free_psm_list,0,sizeof(bta_jv_cb.free_psm_list)); } /******************************************************************************* ** ** Function bta_jv_disable ** ** Description Disables the BT device manager ** free the resources used by java ** ** Returns void ** *******************************************************************************/ void bta_jv_disable (tBTA_JV_MSG *p_data) { UNUSED(p_data); APPL_TRACE_ERROR("%s",__func__); } /** * We keep a list of PSM's that have been freed from JAVA, for reuse. * This function will return a free PSM, and delete it from the free * list. * If no free PSMs exist, 0 will be returned. */ static UINT16 bta_jv_get_free_psm() { const int cnt = sizeof(bta_jv_cb.free_psm_list)/sizeof(bta_jv_cb.free_psm_list[0]); for (int i = 0; i < cnt; i++) { UINT16 psm = bta_jv_cb.free_psm_list[i]; if (psm != 0) { APPL_TRACE_DEBUG("%s(): Reusing PSM: 0x%04d", __func__, psm) bta_jv_cb.free_psm_list[i] = 0; return psm; } } return 0; } static void bta_jv_set_free_psm(UINT16 psm) { int free_index = -1; const int cnt = sizeof(bta_jv_cb.free_psm_list)/sizeof(bta_jv_cb.free_psm_list[0]); for (int i = 0; i < cnt; i++) { if (bta_jv_cb.free_psm_list[i] == 0) { free_index = i; } else if (psm == bta_jv_cb.free_psm_list[i]) { return; // PSM already freed? } } if (free_index != -1) { bta_jv_cb.free_psm_list[free_index] = psm; APPL_TRACE_DEBUG("%s(): Recycling PSM: 0x%04d", __func__, psm) } else { APPL_TRACE_ERROR("%s unable to free psm 0x%x no more free slots",__func__, psm); } } /******************************************************************************* ** ** Function bta_jv_get_channel_id ** ** Description Obtain a free SCN (Server Channel Number) ** (RFCOMM channel or L2CAP PSM) ** ** Returns void ** *******************************************************************************/ void bta_jv_get_channel_id(tBTA_JV_MSG *p_data) { UINT16 psm = 0; switch (p_data->alloc_channel.type) { case BTA_JV_CONN_TYPE_RFCOMM: { INT32 channel = p_data->alloc_channel.channel; UINT8 scn = 0; if (channel > 0) { if (BTM_TryAllocateSCN(channel) == FALSE) { APPL_TRACE_ERROR("rfc channel:%d already in use or invalid", channel); channel = 0; } } else if ((channel = BTM_AllocateSCN()) == 0) { APPL_TRACE_ERROR("run out of rfc channels"); channel = 0; } if (channel != 0) { bta_jv_cb.scn[channel-1] = TRUE; scn = (UINT8) channel; } if (bta_jv_cb.p_dm_cback) bta_jv_cb.p_dm_cback(BTA_JV_GET_SCN_EVT, (tBTA_JV *)&scn, p_data->alloc_channel.user_data); return; } case BTA_JV_CONN_TYPE_L2CAP: psm = bta_jv_get_free_psm(); if (psm == 0) { psm = L2CA_AllocatePSM(); APPL_TRACE_DEBUG("%s() returned PSM: 0x%04x", __func__, psm); } break; case BTA_JV_CONN_TYPE_L2CAP_LE: break; default: break; } if (bta_jv_cb.p_dm_cback) bta_jv_cb.p_dm_cback(BTA_JV_GET_PSM_EVT, (tBTA_JV *)&psm, p_data->alloc_channel.user_data); } /******************************************************************************* ** ** Function bta_jv_free_scn ** ** Description free a SCN ** ** Returns void ** *******************************************************************************/ void bta_jv_free_scn(tBTA_JV_MSG *p_data) { UINT16 scn = p_data->free_channel.scn; switch (p_data->free_channel.type) { case BTA_JV_CONN_TYPE_RFCOMM: { if (scn > 0 && scn <= BTA_JV_MAX_SCN && bta_jv_cb.scn[scn-1]) { /* this scn is used by JV */ bta_jv_cb.scn[scn-1] = FALSE; BTM_FreeSCN(scn); } break; } case BTA_JV_CONN_TYPE_L2CAP: bta_jv_set_free_psm(scn); break; case BTA_JV_CONN_TYPE_L2CAP_LE: // TODO: Not yet implemented... break; default: break; } } static inline tBT_UUID shorten_sdp_uuid(const tBT_UUID* u) { static uint8_t bt_base_uuid[] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x80, 0x00, 0x00, 0x80, 0x5F, 0x9B, 0x34, 0xFB }; logu("in, uuid:", u->uu.uuid128); APPL_TRACE_DEBUG("uuid len:%d", u->len); if(u->len == 16) { if(memcmp(&u->uu.uuid128[4], &bt_base_uuid[4], 12) == 0) { tBT_UUID su; memset(&su, 0, sizeof(su)); if(u->uu.uuid128[0] == 0 && u->uu.uuid128[1] == 0) { su.len = 2; uint16_t u16; memcpy(&u16, &u->uu.uuid128[2], sizeof(u16)); su.uu.uuid16 = ntohs(u16); APPL_TRACE_DEBUG("shorten to 16 bits uuid: %x", su.uu.uuid16); } else { su.len = 4; uint32_t u32; memcpy(&u32, &u->uu.uuid128[0], sizeof(u32)); su.uu.uuid32 = ntohl(u32); APPL_TRACE_DEBUG("shorten to 32 bits uuid: %x", su.uu.uuid32); } return su; } } APPL_TRACE_DEBUG("cannot shorten none-reserved 128 bits uuid"); return *u; } /******************************************************************************* ** ** Function bta_jv_start_discovery_cback ** ** Description Callback for Start Discovery ** ** Returns void ** *******************************************************************************/ static void bta_jv_start_discovery_cback(UINT16 result, void * user_data) { tBTA_JV_STATUS status; APPL_TRACE_DEBUG("bta_jv_start_discovery_cback res: 0x%x", result); bta_jv_cb.sdp_active = BTA_JV_SDP_ACT_NONE; if(bta_jv_cb.p_dm_cback) { tBTA_JV_DISCOVERY_COMP dcomp; dcomp.scn = 0; status = BTA_JV_FAILURE; if (result == SDP_SUCCESS || result == SDP_DB_FULL) { tSDP_DISC_REC *p_sdp_rec = NULL; tSDP_PROTOCOL_ELEM pe; logu("bta_jv_cb.uuid", bta_jv_cb.uuid.uu.uuid128); tBT_UUID su = shorten_sdp_uuid(&bta_jv_cb.uuid); logu("shorten uuid:", su.uu.uuid128); p_sdp_rec = SDP_FindServiceUUIDInDb(p_bta_jv_cfg->p_sdp_db, &su, p_sdp_rec); APPL_TRACE_DEBUG("p_sdp_rec:%p", p_sdp_rec); if (p_sdp_rec && SDP_FindProtocolListElemInRec(p_sdp_rec, UUID_PROTOCOL_RFCOMM, &pe)) { dcomp.scn = (UINT8) pe.params[0]; status = BTA_JV_SUCCESS; } } dcomp.status = status; bta_jv_cb.p_dm_cback(BTA_JV_DISCOVERY_COMP_EVT, (tBTA_JV *)&dcomp, user_data); } } /******************************************************************************* ** ** Function bta_jv_start_discovery ** ** Description Discovers services on a remote device ** ** Returns void ** *******************************************************************************/ void bta_jv_start_discovery(tBTA_JV_MSG *p_data) { tBTA_JV_STATUS status = BTA_JV_FAILURE; APPL_TRACE_DEBUG("bta_jv_start_discovery in, sdp_active:%d", bta_jv_cb.sdp_active); if (bta_jv_cb.sdp_active != BTA_JV_SDP_ACT_NONE) { /* SDP is still in progress */ status = BTA_JV_BUSY; if(bta_jv_cb.p_dm_cback) bta_jv_cb.p_dm_cback(BTA_JV_DISCOVERY_COMP_EVT, (tBTA_JV *)&status, p_data->start_discovery.user_data); return; } /* init the database/set up the filter */ APPL_TRACE_DEBUG("call SDP_InitDiscoveryDb, p_data->start_discovery.num_uuid:%d", p_data->start_discovery.num_uuid); SDP_InitDiscoveryDb (p_bta_jv_cfg->p_sdp_db, p_bta_jv_cfg->sdp_db_size, p_data->start_discovery.num_uuid, p_data->start_discovery.uuid_list, 0, NULL); /* tell SDP to keep the raw data */ p_bta_jv_cfg->p_sdp_db->raw_data = p_bta_jv_cfg->p_sdp_raw_data; p_bta_jv_cfg->p_sdp_db->raw_size = p_bta_jv_cfg->sdp_raw_size; bta_jv_cb.p_sel_raw_data = 0; bta_jv_cb.uuid = p_data->start_discovery.uuid_list[0]; bta_jv_cb.sdp_active = BTA_JV_SDP_ACT_YES; if (!SDP_ServiceSearchAttributeRequest2(p_data->start_discovery.bd_addr, p_bta_jv_cfg->p_sdp_db, bta_jv_start_discovery_cback, p_data->start_discovery.user_data)) { bta_jv_cb.sdp_active = BTA_JV_SDP_ACT_NONE; /* failed to start SDP. report the failure right away */ if(bta_jv_cb.p_dm_cback) bta_jv_cb.p_dm_cback(BTA_JV_DISCOVERY_COMP_EVT, (tBTA_JV *)&status, p_data->start_discovery.user_data); } /* else report the result when the cback is called */ } /******************************************************************************* ** ** Function bta_jv_create_record ** ** Description Create an SDP record with the given attributes ** ** Returns void ** *******************************************************************************/ void bta_jv_create_record(tBTA_JV_MSG *p_data) { tBTA_JV_API_CREATE_RECORD *cr = &(p_data->create_record); tBTA_JV_CREATE_RECORD evt_data; evt_data.status = BTA_JV_SUCCESS; if(bta_jv_cb.p_dm_cback) //callback user immediately to create his own sdp record in stack thread context bta_jv_cb.p_dm_cback(BTA_JV_CREATE_RECORD_EVT, (tBTA_JV *)&evt_data, cr->user_data); } /******************************************************************************* ** ** Function bta_jv_delete_record ** ** Description Delete an SDP record ** ** ** Returns void ** *******************************************************************************/ void bta_jv_delete_record(tBTA_JV_MSG *p_data) { tBTA_JV_API_ADD_ATTRIBUTE *dr = &(p_data->add_attr); if(dr->handle) { /* this is a record created by btif layer*/ SDP_DeleteRecord(dr->handle); } } /******************************************************************************* ** ** Function bta_jv_l2cap_client_cback ** ** Description handles the l2cap client events ** ** Returns void ** *******************************************************************************/ static void bta_jv_l2cap_client_cback(UINT16 gap_handle, UINT16 event) { tBTA_JV_L2C_CB *p_cb = &bta_jv_cb.l2c_cb[gap_handle]; tBTA_JV evt_data; if (gap_handle >= BTA_JV_MAX_L2C_CONN && !p_cb->p_cback) return; APPL_TRACE_DEBUG( "%s: %d evt:x%x",__func__, gap_handle, event); evt_data.l2c_open.status = BTA_JV_SUCCESS; evt_data.l2c_open.handle = gap_handle; switch (event) { case GAP_EVT_CONN_OPENED: bdcpy(evt_data.l2c_open.rem_bda, GAP_ConnGetRemoteAddr(gap_handle)); evt_data.l2c_open.tx_mtu = GAP_ConnGetRemMtuSize(gap_handle); p_cb->state = BTA_JV_ST_CL_OPEN; p_cb->p_cback(BTA_JV_L2CAP_OPEN_EVT, &evt_data, p_cb->user_data); break; case GAP_EVT_CONN_CLOSED: p_cb->state = BTA_JV_ST_NONE; bta_jv_free_sec_id(&p_cb->sec_id); evt_data.l2c_close.async = TRUE; p_cb->p_cback(BTA_JV_L2CAP_CLOSE_EVT, &evt_data, p_cb->user_data); p_cb->p_cback = NULL; break; case GAP_EVT_CONN_DATA_AVAIL: evt_data.data_ind.handle = gap_handle; /* Reset idle timer to avoid requesting sniff mode while receiving data */ bta_jv_pm_conn_busy(p_cb->p_pm_cb); p_cb->p_cback(BTA_JV_L2CAP_DATA_IND_EVT, &evt_data, p_cb->user_data); bta_jv_pm_conn_idle(p_cb->p_pm_cb); break; case GAP_EVT_TX_EMPTY: bta_jv_pm_conn_idle(p_cb->p_pm_cb); break; case GAP_EVT_CONN_CONGESTED: case GAP_EVT_CONN_UNCONGESTED: p_cb->cong = (event == GAP_EVT_CONN_CONGESTED) ? TRUE : FALSE; evt_data.l2c_cong.cong = p_cb->cong; p_cb->p_cback(BTA_JV_L2CAP_CONG_EVT, &evt_data, p_cb->user_data); break; default: break; } } /******************************************************************************* ** ** Function bta_jv_l2cap_connect ** ** Description makes an l2cap client connection ** ** Returns void ** *******************************************************************************/ void bta_jv_l2cap_connect(tBTA_JV_MSG *p_data) { tBTA_JV_L2C_CB *p_cb; tBTA_JV_L2CAP_CL_INIT evt_data; UINT16 handle=GAP_INVALID_HANDLE; UINT8 sec_id; tL2CAP_CFG_INFO cfg; tBTA_JV_API_L2CAP_CONNECT *cc = &(p_data->l2cap_connect); UINT8 chan_mode_mask = GAP_FCR_CHAN_OPT_BASIC; tL2CAP_ERTM_INFO *ertm_info = NULL; memset(&cfg, 0, sizeof(tL2CAP_CFG_INFO)); if (cc->has_cfg == TRUE) { cfg = cc->cfg; if (cfg.fcr_present && cfg.fcr.mode == L2CAP_FCR_ERTM_MODE) { chan_mode_mask = GAP_FCR_CHAN_OPT_ERTM; } } if (cc->has_ertm_info == TRUE) { ertm_info = &(cc->ertm_info); } /* We need to use this value for MTU to be able to handle cases where cfg is not set in req. */ cfg.mtu_present = TRUE; cfg.mtu = cc->rx_mtu; /* TODO: DM role manager L2CA_SetDesireRole(cc->role); */ sec_id = bta_jv_alloc_sec_id(); evt_data.sec_id = sec_id; evt_data.status = BTA_JV_FAILURE; if (sec_id) { /* PSM checking is not required for LE COC */ if ((cc->type != BTA_JV_CONN_TYPE_L2CAP) || (bta_jv_check_psm(cc->remote_psm))) /* allowed */ { if ((handle = GAP_ConnOpen("", sec_id, 0, cc->peer_bd_addr, cc->remote_psm, &cfg, ertm_info, cc->sec_mask, chan_mode_mask, bta_jv_l2cap_client_cback, cc->type)) != GAP_INVALID_HANDLE ) { evt_data.status = BTA_JV_SUCCESS; } } } if (evt_data.status == BTA_JV_SUCCESS) { p_cb = &bta_jv_cb.l2c_cb[handle]; p_cb->handle = handle; p_cb->p_cback = cc->p_cback; p_cb->user_data = cc->user_data; p_cb->psm = 0; /* not a server */ p_cb->sec_id = sec_id; p_cb->state = BTA_JV_ST_CL_OPENING; } else { bta_jv_free_sec_id(&sec_id); } evt_data.handle = handle; cc->p_cback(BTA_JV_L2CAP_CL_INIT_EVT, (tBTA_JV *)&evt_data, cc->user_data); } /******************************************************************************* ** ** Function bta_jv_l2cap_close ** ** Description Close an L2CAP client connection ** ** Returns void ** *******************************************************************************/ void bta_jv_l2cap_close(tBTA_JV_MSG *p_data) { tBTA_JV_L2CAP_CLOSE evt_data; tBTA_JV_API_L2CAP_CLOSE *cc = &(p_data->l2cap_close); tBTA_JV_L2CAP_CBACK *p_cback = cc->p_cb->p_cback; void *user_data = cc->p_cb->user_data; evt_data.handle = cc->handle; evt_data.status = bta_jv_free_l2c_cb(cc->p_cb); evt_data.async = FALSE; if (p_cback) p_cback(BTA_JV_L2CAP_CLOSE_EVT, (tBTA_JV *)&evt_data, user_data); } /******************************************************************************* ** ** Function bta_jv_l2cap_server_cback ** ** Description handles the l2cap server callback ** ** Returns void ** *******************************************************************************/ static void bta_jv_l2cap_server_cback(UINT16 gap_handle, UINT16 event) { tBTA_JV_L2C_CB *p_cb = &bta_jv_cb.l2c_cb[gap_handle]; tBTA_JV evt_data; tBTA_JV_L2CAP_CBACK *p_cback; void *user_data; if (gap_handle >= BTA_JV_MAX_L2C_CONN && !p_cb->p_cback) return; APPL_TRACE_DEBUG( "%s: %d evt:x%x", __func__, gap_handle, event); evt_data.l2c_open.status = BTA_JV_SUCCESS; evt_data.l2c_open.handle = gap_handle; switch (event) { case GAP_EVT_CONN_OPENED: bdcpy(evt_data.l2c_open.rem_bda, GAP_ConnGetRemoteAddr(gap_handle)); evt_data.l2c_open.tx_mtu = GAP_ConnGetRemMtuSize(gap_handle); p_cb->state = BTA_JV_ST_SR_OPEN; p_cb->p_cback(BTA_JV_L2CAP_OPEN_EVT, &evt_data, p_cb->user_data); break; case GAP_EVT_CONN_CLOSED: evt_data.l2c_close.async = TRUE; evt_data.l2c_close.handle = p_cb->handle; p_cback = p_cb->p_cback; user_data = p_cb->user_data; evt_data.l2c_close.status = bta_jv_free_l2c_cb(p_cb); p_cback(BTA_JV_L2CAP_CLOSE_EVT, &evt_data, user_data); break; case GAP_EVT_CONN_DATA_AVAIL: evt_data.data_ind.handle = gap_handle; /* Reset idle timer to avoid requesting sniff mode while receiving data */ bta_jv_pm_conn_busy(p_cb->p_pm_cb); p_cb->p_cback(BTA_JV_L2CAP_DATA_IND_EVT, &evt_data, p_cb->user_data); bta_jv_pm_conn_idle(p_cb->p_pm_cb); break; case GAP_EVT_TX_EMPTY: bta_jv_pm_conn_idle(p_cb->p_pm_cb); break; case GAP_EVT_CONN_CONGESTED: case GAP_EVT_CONN_UNCONGESTED: p_cb->cong = (event == GAP_EVT_CONN_CONGESTED) ? TRUE : FALSE; evt_data.l2c_cong.cong = p_cb->cong; p_cb->p_cback(BTA_JV_L2CAP_CONG_EVT, &evt_data, p_cb->user_data); break; default: break; } } /******************************************************************************* ** ** Function bta_jv_l2cap_start_server ** ** Description starts an L2CAP server ** ** Returns void ** *******************************************************************************/ void bta_jv_l2cap_start_server(tBTA_JV_MSG *p_data) { tBTA_JV_L2C_CB *p_cb; UINT8 sec_id; UINT16 handle; tL2CAP_CFG_INFO cfg; tBTA_JV_L2CAP_START evt_data; tBTA_JV_API_L2CAP_SERVER *ls = &(p_data->l2cap_server); UINT8 chan_mode_mask = GAP_FCR_CHAN_OPT_BASIC; tL2CAP_ERTM_INFO *ertm_info = NULL; memset(&cfg, 0, sizeof(tL2CAP_CFG_INFO)); if (ls->has_cfg == TRUE) { cfg = ls->cfg; if (cfg.fcr_present && cfg.fcr.mode == L2CAP_FCR_ERTM_MODE) { chan_mode_mask = GAP_FCR_CHAN_OPT_ERTM; } } if (ls->has_ertm_info == TRUE) { ertm_info = &(ls->ertm_info); } //FIX: MTU=0 means not present if (ls->rx_mtu >0) { cfg.mtu_present = TRUE; cfg.mtu = ls->rx_mtu; } else { cfg.mtu_present = FALSE; cfg.mtu = 0; } /* TODO DM role manager L2CA_SetDesireRole(ls->role); */ sec_id = bta_jv_alloc_sec_id(); /* PSM checking is not required for LE COC */ if (0 == sec_id || ((ls->type == BTA_JV_CONN_TYPE_L2CAP) && (FALSE == bta_jv_check_psm(ls->local_psm))) || (handle = GAP_ConnOpen("JV L2CAP", sec_id, 1, 0, ls->local_psm, &cfg, ertm_info, ls->sec_mask, chan_mode_mask, bta_jv_l2cap_server_cback, ls->type)) == GAP_INVALID_HANDLE) { bta_jv_free_sec_id(&sec_id); evt_data.status = BTA_JV_FAILURE; } else { p_cb = &bta_jv_cb.l2c_cb[handle]; evt_data.status = BTA_JV_SUCCESS; evt_data.handle = handle; evt_data.sec_id = sec_id; p_cb->p_cback = ls->p_cback; p_cb->user_data = ls->user_data; p_cb->handle = handle; p_cb->sec_id = sec_id; p_cb->state = BTA_JV_ST_SR_LISTEN; p_cb->psm = ls->local_psm; } ls->p_cback(BTA_JV_L2CAP_START_EVT, (tBTA_JV *)&evt_data, ls->user_data); } /******************************************************************************* ** ** Function bta_jv_l2cap_stop_server ** ** Description stops an L2CAP server ** ** Returns void ** *******************************************************************************/ void bta_jv_l2cap_stop_server(tBTA_JV_MSG *p_data) { tBTA_JV_L2C_CB *p_cb; tBTA_JV_L2CAP_CLOSE evt_data; tBTA_JV_API_L2CAP_SERVER *ls = &(p_data->l2cap_server); tBTA_JV_L2CAP_CBACK *p_cback; void *user_data; for (int i = 0; i < BTA_JV_MAX_L2C_CONN; i++) { if (bta_jv_cb.l2c_cb[i].psm == ls->local_psm) { p_cb = &bta_jv_cb.l2c_cb[i]; p_cback = p_cb->p_cback; user_data = p_cb->user_data; evt_data.handle = p_cb->handle; evt_data.status = bta_jv_free_l2c_cb(p_cb); evt_data.async = FALSE; p_cback(BTA_JV_L2CAP_CLOSE_EVT, (tBTA_JV *)&evt_data, user_data); break; } } } /******************************************************************************* ** ** Function bta_jv_l2cap_read ** ** Description Read data from an L2CAP connection ** ** Returns void ** *******************************************************************************/ void bta_jv_l2cap_read(tBTA_JV_MSG *p_data) { tBTA_JV_L2CAP_READ evt_data; tBTA_JV_API_L2CAP_READ *rc = &(p_data->l2cap_read); evt_data.status = BTA_JV_FAILURE; evt_data.handle = rc->handle; evt_data.req_id = rc->req_id; evt_data.p_data = rc->p_data; evt_data.len = 0; if (BT_PASS == GAP_ConnReadData(rc->handle, rc->p_data, rc->len, &evt_data.len)) { evt_data.status = BTA_JV_SUCCESS; } rc->p_cback(BTA_JV_L2CAP_READ_EVT, (tBTA_JV *)&evt_data, rc->user_data); } /******************************************************************************* ** ** Function bta_jv_l2cap_write ** ** Description Write data to an L2CAP connection ** ** Returns void ** *******************************************************************************/ void bta_jv_l2cap_write(tBTA_JV_MSG *p_data) { tBTA_JV_L2CAP_WRITE evt_data; tBTA_JV_API_L2CAP_WRITE *ls = &(p_data->l2cap_write); /* As we check this callback exists before the tBTA_JV_API_L2CAP_WRITE can be send through the * API this check should not be needed. * But the API is not designed to be used (safely at least) in a multi-threaded scheduler, hence * if the peer device disconnects the l2cap link after the API is called, but before this * message is handled, the ->p_cback will be cleared at this point. At first glanch this seems * highly unlikely, but for all obex-profiles with two channels connected - e.g. MAP, this * happens around 1 of 4 disconnects, as a disconnect on the server channel causes a disconnect * to be send on the client (notification) channel, but at the peer typically disconnects both * the OBEX disconnect request crosses the incoming l2cap disconnect. * If p_cback is cleared, we simply discard the data. * RISK: The caller must handle any cleanup based on another signal than BTA_JV_L2CAP_WRITE_EVT, * which is typically not possible, as the pointer to the allocated buffer is stored * in this message, and can therefore not be freed, hence we have a mem-leak-by-design.*/ if (ls->p_cb->p_cback != NULL) { evt_data.status = BTA_JV_FAILURE; evt_data.handle = ls->handle; evt_data.req_id = ls->req_id; evt_data.cong = ls->p_cb->cong; evt_data.len = 0; bta_jv_pm_conn_busy(ls->p_cb->p_pm_cb); if (!evt_data.cong && BT_PASS == GAP_ConnWriteData(ls->handle, ls->p_data, ls->len, &evt_data.len)) { evt_data.status = BTA_JV_SUCCESS; } ls->p_cb->p_cback(BTA_JV_L2CAP_WRITE_EVT, (tBTA_JV *)&evt_data, ls->user_data); } else { /* As this pointer is checked in the API function, this occurs only when the channel is * disconnected after the API function is called, but before the message is handled. */ APPL_TRACE_ERROR("%s() ls->p_cb->p_cback == NULL", __func__); } } /******************************************************************************* ** ** Function bta_jv_l2cap_write_fixed ** ** Description Write data to an L2CAP connection using Fixed channels ** ** Returns void ** *******************************************************************************/ void bta_jv_l2cap_write_fixed(tBTA_JV_MSG *p_data) { tBTA_JV_L2CAP_WRITE_FIXED evt_data; tBTA_JV_API_L2CAP_WRITE_FIXED *ls = &(p_data->l2cap_write_fixed); BT_HDR *msg = (BT_HDR *)osi_malloc(sizeof(BT_HDR) + ls->len + L2CAP_MIN_OFFSET); evt_data.status = BTA_JV_FAILURE; evt_data.channel = ls->channel; memcpy(evt_data.addr, ls->addr, sizeof(evt_data.addr)); evt_data.req_id = ls->req_id; evt_data.len = 0; memcpy(((uint8_t*)(msg + 1)) + L2CAP_MIN_OFFSET, ls->p_data, ls->len); msg->len = ls->len; msg->offset = L2CAP_MIN_OFFSET; L2CA_SendFixedChnlData(ls->channel, ls->addr, msg); ls->p_cback(BTA_JV_L2CAP_WRITE_FIXED_EVT, (tBTA_JV *)&evt_data, ls->user_data); } /******************************************************************************* ** ** Function bta_jv_port_data_co_cback ** ** Description port data callback function of rfcomm ** connections ** ** Returns void ** *******************************************************************************/ static int bta_jv_port_data_co_cback(UINT16 port_handle, UINT8 *buf, UINT16 len, int type) { tBTA_JV_RFC_CB *p_cb = bta_jv_rfc_port_to_cb(port_handle); tBTA_JV_PCB *p_pcb = bta_jv_rfc_port_to_pcb(port_handle); APPL_TRACE_DEBUG("%s, p_cb:%p, p_pcb:%p, len:%d, type:%d", __func__, p_cb, p_pcb, len, type); if (p_pcb != NULL) { switch(type) { case DATA_CO_CALLBACK_TYPE_INCOMING: return bta_co_rfc_data_incoming(p_pcb->user_data, (BT_HDR*)buf); case DATA_CO_CALLBACK_TYPE_OUTGOING_SIZE: return bta_co_rfc_data_outgoing_size(p_pcb->user_data, (int*)buf); case DATA_CO_CALLBACK_TYPE_OUTGOING: return bta_co_rfc_data_outgoing(p_pcb->user_data, buf, len); default: APPL_TRACE_ERROR("unknown callout type:%d", type); break; } } return 0; } /******************************************************************************* ** ** Function bta_jv_port_mgmt_cl_cback ** ** Description callback for port mamangement function of rfcomm ** client connections ** ** Returns void ** *******************************************************************************/ static void bta_jv_port_mgmt_cl_cback(UINT32 code, UINT16 port_handle) { tBTA_JV_RFC_CB *p_cb = bta_jv_rfc_port_to_cb(port_handle); tBTA_JV_PCB *p_pcb = bta_jv_rfc_port_to_pcb(port_handle); tBTA_JV evt_data; BD_ADDR rem_bda; UINT16 lcid; tBTA_JV_RFCOMM_CBACK *p_cback; /* the callback function */ APPL_TRACE_DEBUG( "bta_jv_port_mgmt_cl_cback:code:%d, port_handle%d", code, port_handle); if(NULL == p_cb || NULL == p_cb->p_cback) return; APPL_TRACE_DEBUG( "bta_jv_port_mgmt_cl_cback code=%d port_handle:%d handle:%d", code, port_handle, p_cb->handle); PORT_CheckConnection(port_handle, rem_bda, &lcid); if(code == PORT_SUCCESS) { evt_data.rfc_open.handle = p_cb->handle; evt_data.rfc_open.status = BTA_JV_SUCCESS; bdcpy(evt_data.rfc_open.rem_bda, rem_bda); p_pcb->state = BTA_JV_ST_CL_OPEN; p_cb->p_cback(BTA_JV_RFCOMM_OPEN_EVT, &evt_data, p_pcb->user_data); } else { evt_data.rfc_close.handle = p_cb->handle; evt_data.rfc_close.status = BTA_JV_FAILURE; evt_data.rfc_close.port_status = code; evt_data.rfc_close.async = TRUE; if (p_pcb->state == BTA_JV_ST_CL_CLOSING) { evt_data.rfc_close.async = FALSE; } //p_pcb->state = BTA_JV_ST_NONE; //p_pcb->cong = FALSE; p_cback = p_cb->p_cback; p_cback(BTA_JV_RFCOMM_CLOSE_EVT, &evt_data, p_pcb->user_data); //bta_jv_free_rfc_cb(p_cb, p_pcb); } } /******************************************************************************* ** ** Function bta_jv_port_event_cl_cback ** ** Description Callback for RFCOMM client port events ** ** Returns void ** *******************************************************************************/ static void bta_jv_port_event_cl_cback(UINT32 code, UINT16 port_handle) { tBTA_JV_RFC_CB *p_cb = bta_jv_rfc_port_to_cb(port_handle); tBTA_JV_PCB *p_pcb = bta_jv_rfc_port_to_pcb(port_handle); tBTA_JV evt_data; APPL_TRACE_DEBUG( "bta_jv_port_event_cl_cback:%d", port_handle); if (NULL == p_cb || NULL == p_cb->p_cback) return; APPL_TRACE_DEBUG( "bta_jv_port_event_cl_cback code=x%x port_handle:%d handle:%d", code, port_handle, p_cb->handle); if (code & PORT_EV_RXCHAR) { evt_data.data_ind.handle = p_cb->handle; p_cb->p_cback(BTA_JV_RFCOMM_DATA_IND_EVT, &evt_data, p_pcb->user_data); } if (code & PORT_EV_FC) { p_pcb->cong = (code & PORT_EV_FCS) ? FALSE : TRUE; evt_data.rfc_cong.cong = p_pcb->cong; evt_data.rfc_cong.handle = p_cb->handle; evt_data.rfc_cong.status = BTA_JV_SUCCESS; p_cb->p_cback(BTA_JV_RFCOMM_CONG_EVT, &evt_data, p_pcb->user_data); } if (code & PORT_EV_TXEMPTY) { bta_jv_pm_conn_idle(p_pcb->p_pm_cb); } } /******************************************************************************* ** ** Function bta_jv_rfcomm_connect ** ** Description Client initiates an RFCOMM connection ** ** Returns void ** *******************************************************************************/ void bta_jv_rfcomm_connect(tBTA_JV_MSG *p_data) { UINT16 handle = 0; UINT32 event_mask = BTA_JV_RFC_EV_MASK; tPORT_STATE port_state; UINT8 sec_id = 0; tBTA_JV_RFC_CB *p_cb = NULL; tBTA_JV_PCB *p_pcb; tBTA_JV_API_RFCOMM_CONNECT *cc = &(p_data->rfcomm_connect); tBTA_JV_RFCOMM_CL_INIT evt_data; /* TODO DM role manager L2CA_SetDesireRole(cc->role); */ sec_id = bta_jv_alloc_sec_id(); memset(&evt_data, 0, sizeof(evt_data)); evt_data.sec_id = sec_id; evt_data.status = BTA_JV_SUCCESS; if (0 == sec_id || BTM_SetSecurityLevel(TRUE, "", sec_id, cc->sec_mask, BT_PSM_RFCOMM, BTM_SEC_PROTO_RFCOMM, cc->remote_scn) == FALSE) { evt_data.status = BTA_JV_FAILURE; APPL_TRACE_ERROR("sec_id:%d is zero or BTM_SetSecurityLevel failed, remote_scn:%d", sec_id, cc->remote_scn); } if (evt_data.status == BTA_JV_SUCCESS && RFCOMM_CreateConnection(UUID_SERVCLASS_SERIAL_PORT, cc->remote_scn, FALSE, BTA_JV_DEF_RFC_MTU, cc->peer_bd_addr, &handle, bta_jv_port_mgmt_cl_cback) != PORT_SUCCESS) { APPL_TRACE_ERROR("bta_jv_rfcomm_connect, RFCOMM_CreateConnection failed"); evt_data.status = BTA_JV_FAILURE; } if (evt_data.status == BTA_JV_SUCCESS) { p_cb = bta_jv_alloc_rfc_cb(handle, &p_pcb); if(p_cb) { p_cb->p_cback = cc->p_cback; p_cb->sec_id = sec_id; p_cb->scn = 0; p_pcb->state = BTA_JV_ST_CL_OPENING; p_pcb->user_data = cc->user_data; evt_data.use_co = TRUE; PORT_SetEventCallback(handle, bta_jv_port_event_cl_cback); PORT_SetEventMask(handle, event_mask); PORT_SetDataCOCallback (handle, bta_jv_port_data_co_cback); PORT_GetState(handle, &port_state); port_state.fc_type = (PORT_FC_CTS_ON_INPUT | PORT_FC_CTS_ON_OUTPUT); /* coverity[uninit_use_in_call] FALSE-POSITIVE: port_state is initialized at PORT_GetState() */ PORT_SetState(handle, &port_state); evt_data.handle = p_cb->handle; } else { evt_data.status = BTA_JV_FAILURE; APPL_TRACE_ERROR("run out of rfc control block"); } } cc->p_cback(BTA_JV_RFCOMM_CL_INIT_EVT, (tBTA_JV *)&evt_data, cc->user_data); if(evt_data.status == BTA_JV_FAILURE) { if(sec_id) bta_jv_free_sec_id(&sec_id); if(handle) RFCOMM_RemoveConnection(handle); } } static int find_rfc_pcb(void* user_data, tBTA_JV_RFC_CB **cb, tBTA_JV_PCB **pcb) { *cb = NULL; *pcb = NULL; int i; for (i = 0; i < MAX_RFC_PORTS; i++) { UINT32 rfc_handle = bta_jv_cb.port_cb[i].handle & BTA_JV_RFC_HDL_MASK; rfc_handle &= ~BTA_JV_RFCOMM_MASK; if (rfc_handle && bta_jv_cb.port_cb[i].user_data == user_data) { *pcb = &bta_jv_cb.port_cb[i]; *cb = &bta_jv_cb.rfc_cb[rfc_handle - 1]; APPL_TRACE_DEBUG("find_rfc_pcb(): FOUND rfc_cb_handle 0x%x, port.jv_handle:" " 0x%x, state: %d, rfc_cb->handle: 0x%x", rfc_handle, (*pcb)->handle, (*pcb)->state, (*cb)->handle); return 1; } } APPL_TRACE_DEBUG("find_rfc_pcb: cannot find rfc_cb from user data: %u", PTR_TO_UINT(user_data)); return 0; } /******************************************************************************* ** ** Function bta_jv_rfcomm_close ** ** Description Close an RFCOMM connection ** ** Returns void ** *******************************************************************************/ void bta_jv_rfcomm_close(tBTA_JV_MSG *p_data) { tBTA_JV_API_RFCOMM_CLOSE *cc = &(p_data->rfcomm_close); tBTA_JV_RFC_CB *p_cb = NULL; tBTA_JV_PCB *p_pcb = NULL; APPL_TRACE_DEBUG("bta_jv_rfcomm_close, rfc handle:%d", cc->handle); if (!cc->handle) { APPL_TRACE_ERROR("bta_jv_rfcomm_close, rfc handle is null"); return; } void* user_data = cc->user_data; if (!find_rfc_pcb(user_data, &p_cb, &p_pcb)) return; bta_jv_free_rfc_cb(p_cb, p_pcb); APPL_TRACE_DEBUG("bta_jv_rfcomm_close: sec id in use:%d, rfc_cb in use:%d", get_sec_id_used(), get_rfc_cb_used()); } /******************************************************************************* ** ** Function bta_jv_port_mgmt_sr_cback ** ** Description callback for port mamangement function of rfcomm ** server connections ** ** Returns void ** *******************************************************************************/ static void bta_jv_port_mgmt_sr_cback(UINT32 code, UINT16 port_handle) { tBTA_JV_PCB *p_pcb = bta_jv_rfc_port_to_pcb(port_handle); tBTA_JV_RFC_CB *p_cb = bta_jv_rfc_port_to_cb(port_handle); tBTA_JV evt_data; BD_ADDR rem_bda; UINT16 lcid; APPL_TRACE_DEBUG("bta_jv_port_mgmt_sr_cback, code:%d, port_handle:%d", code, port_handle); if (NULL == p_cb || NULL == p_cb->p_cback) { APPL_TRACE_ERROR("bta_jv_port_mgmt_sr_cback, p_cb:%p, p_cb->p_cback%p", p_cb, p_cb ? p_cb->p_cback : NULL); return; } void *user_data = p_pcb->user_data; APPL_TRACE_DEBUG( "bta_jv_port_mgmt_sr_cback code=%d port_handle:0x%x handle:0x%x, p_pcb:%p, user:%d", code, port_handle, p_cb->handle, p_pcb, p_pcb->user_data); PORT_CheckConnection(port_handle, rem_bda, &lcid); int failed = TRUE; if (code == PORT_SUCCESS) { evt_data.rfc_srv_open.handle = p_pcb->handle; evt_data.rfc_srv_open.status = BTA_JV_SUCCESS; bdcpy(evt_data.rfc_srv_open.rem_bda, rem_bda); tBTA_JV_PCB *p_pcb_new_listen = bta_jv_add_rfc_port(p_cb, p_pcb); if (p_pcb_new_listen) { evt_data.rfc_srv_open.new_listen_handle = p_pcb_new_listen->handle; p_pcb_new_listen->user_data = p_cb->p_cback(BTA_JV_RFCOMM_SRV_OPEN_EVT, &evt_data, user_data); APPL_TRACE_DEBUG("PORT_SUCCESS: curr_sess:%d, max_sess:%d", p_cb->curr_sess, p_cb->max_sess); failed = FALSE; } else APPL_TRACE_ERROR("bta_jv_add_rfc_port failed to create new listen port"); } if (failed) { evt_data.rfc_close.handle = p_cb->handle; evt_data.rfc_close.status = BTA_JV_FAILURE; evt_data.rfc_close.async = TRUE; evt_data.rfc_close.port_status = code; p_pcb->cong = FALSE; tBTA_JV_RFCOMM_CBACK *p_cback = p_cb->p_cback; APPL_TRACE_DEBUG("PORT_CLOSED before BTA_JV_RFCOMM_CLOSE_EVT: curr_sess:%d, max_sess:%d", p_cb->curr_sess, p_cb->max_sess); if (BTA_JV_ST_SR_CLOSING == p_pcb->state) { evt_data.rfc_close.async = FALSE; evt_data.rfc_close.status = BTA_JV_SUCCESS; } //p_pcb->state = BTA_JV_ST_NONE; p_cback(BTA_JV_RFCOMM_CLOSE_EVT, &evt_data, user_data); //bta_jv_free_rfc_cb(p_cb, p_pcb); APPL_TRACE_DEBUG("PORT_CLOSED after BTA_JV_RFCOMM_CLOSE_EVT: curr_sess:%d, max_sess:%d", p_cb->curr_sess, p_cb->max_sess); } } /******************************************************************************* ** ** Function bta_jv_port_event_sr_cback ** ** Description Callback for RFCOMM server port events ** ** Returns void ** *******************************************************************************/ static void bta_jv_port_event_sr_cback(UINT32 code, UINT16 port_handle) { tBTA_JV_PCB *p_pcb = bta_jv_rfc_port_to_pcb(port_handle); tBTA_JV_RFC_CB *p_cb = bta_jv_rfc_port_to_cb(port_handle); tBTA_JV evt_data; if (NULL == p_cb || NULL == p_cb->p_cback) return; APPL_TRACE_DEBUG( "bta_jv_port_event_sr_cback code=x%x port_handle:%d handle:%d", code, port_handle, p_cb->handle); void *user_data = p_pcb->user_data; if (code & PORT_EV_RXCHAR) { evt_data.data_ind.handle = p_cb->handle; p_cb->p_cback(BTA_JV_RFCOMM_DATA_IND_EVT, &evt_data, user_data); } if (code & PORT_EV_FC) { p_pcb->cong = (code & PORT_EV_FCS) ? FALSE : TRUE; evt_data.rfc_cong.cong = p_pcb->cong; evt_data.rfc_cong.handle = p_cb->handle; evt_data.rfc_cong.status = BTA_JV_SUCCESS; p_cb->p_cback(BTA_JV_RFCOMM_CONG_EVT, &evt_data, user_data); } if (code & PORT_EV_TXEMPTY) { bta_jv_pm_conn_idle(p_pcb->p_pm_cb); } } /******************************************************************************* ** ** Function bta_jv_add_rfc_port ** ** Description add a port for server when the existing posts is open ** ** Returns return a pointer to tBTA_JV_PCB just added ** *******************************************************************************/ static tBTA_JV_PCB * bta_jv_add_rfc_port(tBTA_JV_RFC_CB *p_cb, tBTA_JV_PCB *p_pcb_open) { UINT8 used = 0, i, listen=0; UINT32 si = 0; tPORT_STATE port_state; UINT32 event_mask = BTA_JV_RFC_EV_MASK; tBTA_JV_PCB *p_pcb = NULL; if (p_cb->max_sess > 1) { for (i=0; i < p_cb->max_sess; i++) { if (p_cb->rfc_hdl[i] != 0) { p_pcb = &bta_jv_cb.port_cb[p_cb->rfc_hdl[i] - 1]; if (p_pcb->state == BTA_JV_ST_SR_LISTEN) { listen++; if (p_pcb_open == p_pcb) { APPL_TRACE_DEBUG("bta_jv_add_rfc_port, port_handle:%d, change the listen port to open state", p_pcb->port_handle); p_pcb->state = BTA_JV_ST_SR_OPEN; } else { APPL_TRACE_ERROR("bta_jv_add_rfc_port, open pcb not matching listen one," "listen count:%d, listen pcb handle:%d, open pcb:%d", listen, p_pcb->port_handle, p_pcb_open->handle); return NULL; } } used++; } else if (si == 0) { si = i + 1; } } APPL_TRACE_DEBUG("bta_jv_add_rfc_port max_sess=%d used:%d curr_sess:%d, listen:%d si:%d", p_cb->max_sess, used, p_cb->curr_sess, listen, si); if (used < p_cb->max_sess && listen == 1 && si) { si--; if (RFCOMM_CreateConnection(p_cb->sec_id, p_cb->scn, TRUE, BTA_JV_DEF_RFC_MTU, (UINT8 *) bd_addr_any, &(p_cb->rfc_hdl[si]), bta_jv_port_mgmt_sr_cback) == PORT_SUCCESS) { p_cb->curr_sess++; p_pcb = &bta_jv_cb.port_cb[p_cb->rfc_hdl[si] - 1]; p_pcb->state = BTA_JV_ST_SR_LISTEN; p_pcb->port_handle = p_cb->rfc_hdl[si]; p_pcb->user_data = p_pcb_open->user_data; PORT_ClearKeepHandleFlag(p_pcb->port_handle); PORT_SetEventCallback(p_pcb->port_handle, bta_jv_port_event_sr_cback); PORT_SetDataCOCallback (p_pcb->port_handle, bta_jv_port_data_co_cback); PORT_SetEventMask(p_pcb->port_handle, event_mask); PORT_GetState(p_pcb->port_handle, &port_state); port_state.fc_type = (PORT_FC_CTS_ON_INPUT | PORT_FC_CTS_ON_OUTPUT); PORT_SetState(p_pcb->port_handle, &port_state); p_pcb->handle = BTA_JV_RFC_H_S_TO_HDL(p_cb->handle, si); APPL_TRACE_DEBUG("bta_jv_add_rfc_port: p_pcb->handle:0x%x, curr_sess:%d", p_pcb->handle, p_cb->curr_sess); } } else APPL_TRACE_ERROR("bta_jv_add_rfc_port, cannot create new rfc listen port"); } APPL_TRACE_DEBUG("bta_jv_add_rfc_port: sec id in use:%d, rfc_cb in use:%d", get_sec_id_used(), get_rfc_cb_used()); return p_pcb; } /******************************************************************************* ** ** Function bta_jv_rfcomm_start_server ** ** Description waits for an RFCOMM client to connect ** ** ** Returns void ** *******************************************************************************/ void bta_jv_rfcomm_start_server(tBTA_JV_MSG *p_data) { UINT16 handle = 0; UINT32 event_mask = BTA_JV_RFC_EV_MASK; tPORT_STATE port_state; UINT8 sec_id = 0; tBTA_JV_RFC_CB *p_cb = NULL; tBTA_JV_PCB *p_pcb; tBTA_JV_API_RFCOMM_SERVER *rs = &(p_data->rfcomm_server); tBTA_JV_RFCOMM_START evt_data; /* TODO DM role manager L2CA_SetDesireRole(rs->role); */ memset(&evt_data, 0, sizeof(evt_data)); evt_data.status = BTA_JV_FAILURE; APPL_TRACE_DEBUG("bta_jv_rfcomm_start_server: sec id in use:%d, rfc_cb in use:%d", get_sec_id_used(), get_rfc_cb_used()); do { sec_id = bta_jv_alloc_sec_id(); if (0 == sec_id || BTM_SetSecurityLevel(FALSE, "JV PORT", sec_id, rs->sec_mask, BT_PSM_RFCOMM, BTM_SEC_PROTO_RFCOMM, rs->local_scn) == FALSE) { APPL_TRACE_ERROR("bta_jv_rfcomm_start_server, run out of sec_id"); break; } if (RFCOMM_CreateConnection(sec_id, rs->local_scn, TRUE, BTA_JV_DEF_RFC_MTU, (UINT8 *) bd_addr_any, &handle, bta_jv_port_mgmt_sr_cback) != PORT_SUCCESS) { APPL_TRACE_ERROR("bta_jv_rfcomm_start_server, RFCOMM_CreateConnection failed"); break; } p_cb = bta_jv_alloc_rfc_cb(handle, &p_pcb); if (!p_cb) { APPL_TRACE_ERROR("bta_jv_rfcomm_start_server, run out of rfc control block"); break; } p_cb->max_sess = rs->max_session; p_cb->p_cback = rs->p_cback; p_cb->sec_id = sec_id; p_cb->scn = rs->local_scn; p_pcb->state = BTA_JV_ST_SR_LISTEN; p_pcb->user_data = rs->user_data; evt_data.status = BTA_JV_SUCCESS; evt_data.handle = p_cb->handle; evt_data.sec_id = sec_id; evt_data.use_co = TRUE; PORT_ClearKeepHandleFlag(handle); PORT_SetEventCallback(handle, bta_jv_port_event_sr_cback); PORT_SetEventMask(handle, event_mask); PORT_GetState(handle, &port_state); port_state.fc_type = (PORT_FC_CTS_ON_INPUT | PORT_FC_CTS_ON_OUTPUT); PORT_SetState(handle, &port_state); } while (0); rs->p_cback(BTA_JV_RFCOMM_START_EVT, (tBTA_JV *)&evt_data, rs->user_data); if (evt_data.status == BTA_JV_SUCCESS) { PORT_SetDataCOCallback (handle, bta_jv_port_data_co_cback); } else { if (sec_id) bta_jv_free_sec_id(&sec_id); if (handle) RFCOMM_RemoveConnection(handle); } } /******************************************************************************* ** ** Function bta_jv_rfcomm_stop_server ** ** Description stops an RFCOMM server ** ** Returns void ** *******************************************************************************/ void bta_jv_rfcomm_stop_server(tBTA_JV_MSG *p_data) { tBTA_JV_API_RFCOMM_SERVER *ls = &(p_data->rfcomm_server); tBTA_JV_RFC_CB *p_cb = NULL; tBTA_JV_PCB *p_pcb = NULL; APPL_TRACE_DEBUG("bta_jv_rfcomm_stop_server"); if (!ls->handle) { APPL_TRACE_ERROR("bta_jv_rfcomm_stop_server, jv handle is null"); return; } void* user_data = ls->user_data; if (!find_rfc_pcb(user_data, &p_cb, &p_pcb)) return; APPL_TRACE_DEBUG("bta_jv_rfcomm_stop_server: p_pcb:%p, p_pcb->port_handle:%d", p_pcb, p_pcb->port_handle); bta_jv_free_rfc_cb(p_cb, p_pcb); APPL_TRACE_DEBUG("bta_jv_rfcomm_stop_server: sec id in use:%d, rfc_cb in use:%d", get_sec_id_used(), get_rfc_cb_used()); } /******************************************************************************* ** ** Function bta_jv_rfcomm_write ** ** Description write data to an RFCOMM connection ** ** Returns void ** *******************************************************************************/ void bta_jv_rfcomm_write(tBTA_JV_MSG *p_data) { tBTA_JV_API_RFCOMM_WRITE *wc = &(p_data->rfcomm_write); tBTA_JV_RFC_CB *p_cb = wc->p_cb; tBTA_JV_PCB *p_pcb = wc->p_pcb; tBTA_JV_RFCOMM_WRITE evt_data; evt_data.status = BTA_JV_FAILURE; evt_data.handle = p_cb->handle; evt_data.req_id = wc->req_id; evt_data.cong = p_pcb->cong; evt_data.len = 0; bta_jv_pm_conn_busy(p_pcb->p_pm_cb); if (!evt_data.cong && PORT_WriteDataCO(p_pcb->port_handle, &evt_data.len) == PORT_SUCCESS) { evt_data.status = BTA_JV_SUCCESS; } //update congestion flag evt_data.cong = p_pcb->cong; if (p_cb->p_cback) { p_cb->p_cback(BTA_JV_RFCOMM_WRITE_EVT, (tBTA_JV *)&evt_data, p_pcb->user_data); } else { APPL_TRACE_ERROR("bta_jv_rfcomm_write :: WARNING ! No JV callback set"); } } /******************************************************************************* ** ** Function bta_jv_set_pm_profile ** ** Description Set or free power mode profile for a JV application ** ** Returns void ** *******************************************************************************/ void bta_jv_set_pm_profile(tBTA_JV_MSG *p_data) { tBTA_JV_STATUS status; tBTA_JV_PM_CB *p_cb; APPL_TRACE_API("bta_jv_set_pm_profile(handle: 0x%x, app_id: %d, init_st: %d)", p_data->set_pm.handle, p_data->set_pm.app_id, p_data->set_pm.init_st); /* clear PM control block */ if (p_data->set_pm.app_id == BTA_JV_PM_ID_CLEAR) { status = bta_jv_free_set_pm_profile_cb(p_data->set_pm.handle); if (status != BTA_JV_SUCCESS) { APPL_TRACE_WARNING("bta_jv_set_pm_profile() free pm cb failed: reason %d", status); } } else /* set PM control block */ { p_cb = bta_jv_alloc_set_pm_profile_cb(p_data->set_pm.handle, p_data->set_pm.app_id); if (NULL != p_cb) bta_jv_pm_state_change(p_cb, p_data->set_pm.init_st); else APPL_TRACE_WARNING("bta_jv_alloc_set_pm_profile_cb() failed"); } } /******************************************************************************* ** ** Function bta_jv_change_pm_state ** ** Description change jv pm connect state, used internally ** ** Returns void ** *******************************************************************************/ void bta_jv_change_pm_state(tBTA_JV_MSG *p_data) { tBTA_JV_API_PM_STATE_CHANGE *p_msg = (tBTA_JV_API_PM_STATE_CHANGE *)p_data; if (p_msg->p_cb) bta_jv_pm_state_change(p_msg->p_cb, p_msg->state); } /******************************************************************************* ** ** Function bta_jv_set_pm_conn_state ** ** Description Send pm event state change to jv state machine to serialize jv pm changes ** in relation to other jv messages. internal API use mainly. ** ** Params: p_cb: jv pm control block, NULL pointer returns failure ** new_state: new PM connections state, setting is forced by action function ** ** Returns BTA_JV_SUCCESS, BTA_JV_FAILURE (buffer allocation, or NULL ptr!) ** *******************************************************************************/ tBTA_JV_STATUS bta_jv_set_pm_conn_state(tBTA_JV_PM_CB *p_cb, const tBTA_JV_CONN_STATE new_st) { if (p_cb == NULL) return BTA_JV_FAILURE; APPL_TRACE_API("%s: handle:0x%x, state: %d", __func__, p_cb->handle, new_st); tBTA_JV_API_PM_STATE_CHANGE *p_msg = (tBTA_JV_API_PM_STATE_CHANGE *)osi_malloc(sizeof(tBTA_JV_API_PM_STATE_CHANGE)); p_msg->hdr.event = BTA_JV_API_PM_STATE_CHANGE_EVT; p_msg->p_cb = p_cb; p_msg->state = new_st; bta_sys_sendmsg(p_msg); return BTA_JV_SUCCESS; } /******************************************************************************* ** ** Function bta_jv_pm_conn_busy ** ** Description set pm connection busy state (input param safe) ** ** Params p_cb: pm control block of jv connection ** ** Returns void ** *******************************************************************************/ static void bta_jv_pm_conn_busy(tBTA_JV_PM_CB *p_cb) { if ((NULL != p_cb) && (BTA_JV_PM_IDLE_ST == p_cb->state)) bta_jv_pm_state_change(p_cb, BTA_JV_CONN_BUSY); } /******************************************************************************* ** ** Function bta_jv_pm_conn_busy ** ** Description set pm connection busy state (input param safe) ** ** Params p_cb: pm control block of jv connection ** ** Returns void ** *******************************************************************************/ static void bta_jv_pm_conn_idle(tBTA_JV_PM_CB *p_cb) { if ((NULL != p_cb) && (BTA_JV_PM_IDLE_ST != p_cb->state)) bta_jv_pm_state_change(p_cb, BTA_JV_CONN_IDLE); } /******************************************************************************* ** ** Function bta_jv_pm_state_change ** ** Description Notify power manager there is state change ** ** Params p_cb: must be NONE NULL ** ** Returns void ** *******************************************************************************/ static void bta_jv_pm_state_change(tBTA_JV_PM_CB *p_cb, const tBTA_JV_CONN_STATE state) { APPL_TRACE_API("bta_jv_pm_state_change(p_cb: 0x%x, handle: 0x%x, busy/idle_state: %d" ", app_id: %d, conn_state: %d)", p_cb, p_cb->handle, p_cb->state, p_cb->app_id, state); switch (state) { case BTA_JV_CONN_OPEN: bta_sys_conn_open(BTA_ID_JV, p_cb->app_id, p_cb->peer_bd_addr); break; case BTA_JV_CONN_CLOSE: bta_sys_conn_close(BTA_ID_JV, p_cb->app_id, p_cb->peer_bd_addr); break; case BTA_JV_APP_OPEN: bta_sys_app_open(BTA_ID_JV, p_cb->app_id, p_cb->peer_bd_addr); break; case BTA_JV_APP_CLOSE: bta_sys_app_close(BTA_ID_JV, p_cb->app_id, p_cb->peer_bd_addr); break; case BTA_JV_SCO_OPEN: bta_sys_sco_open(BTA_ID_JV, p_cb->app_id, p_cb->peer_bd_addr); break; case BTA_JV_SCO_CLOSE: bta_sys_sco_close(BTA_ID_JV, p_cb->app_id, p_cb->peer_bd_addr); break; case BTA_JV_CONN_IDLE: p_cb->state = BTA_JV_PM_IDLE_ST; bta_sys_idle(BTA_ID_JV, p_cb->app_id, p_cb->peer_bd_addr); break; case BTA_JV_CONN_BUSY: p_cb->state = BTA_JV_PM_BUSY_ST; bta_sys_busy(BTA_ID_JV, p_cb->app_id, p_cb->peer_bd_addr); break; default: APPL_TRACE_WARNING("bta_jv_pm_state_change(state: %d): Invalid state", state); break; } } /**********************************************************************************************/ static struct fc_channel *fcchan_get(uint16_t chan, char create) { struct fc_channel *t = fc_channels; static tL2CAP_FIXED_CHNL_REG fcr = { .pL2CA_FixedConn_Cb = fcchan_conn_chng_cbk, .pL2CA_FixedData_Cb = fcchan_data_cbk, .default_idle_tout = 0xffff, .fixed_chnl_opts = { .mode = L2CAP_FCR_BASIC_MODE, .max_transmit = 0xFF, .rtrans_tout = 2000, .mon_tout = 12000, .mps = 670, .tx_win_sz = 1, }, }; while (t && t->chan != chan) t = t->next; if (t) return t; else if (!create) return NULL; /* we cannot alloc a struct if not asked to */ t = osi_calloc(sizeof(*t)); t->chan = chan; if (!L2CA_RegisterFixedChannel(chan, &fcr)) { osi_free(t); return NULL; } //link it in t->next = fc_channels; fc_channels = t; return t; } /* pass NULL to find servers */ static struct fc_client *fcclient_find_by_addr(struct fc_client *start, BD_ADDR addr) { struct fc_client *t = start; while (t) { /* match client if have addr */ if (addr && !memcmp(addr, &t->remote_addr, sizeof(t->remote_addr))) break; /* match server if do not have addr */ if (!addr && t->server) break; t = t->next_all_list; } return t; } static struct fc_client *fcclient_find_by_id(uint32_t id) { struct fc_client *t = fc_clients; while (t && t->id != id) t = t->next_all_list; return t; } static struct fc_client *fcclient_alloc(uint16_t chan, char server, const uint8_t *sec_id_to_use) { struct fc_channel *fc = fcchan_get(chan, TRUE); struct fc_client *t; uint8_t sec_id; if (!fc) return NULL; if (fc->has_server && server) return NULL; /* no way to have multiple servers on same channel */ if (sec_id_to_use) sec_id = *sec_id_to_use; else sec_id = bta_jv_alloc_sec_id(); t = osi_calloc(sizeof(*t)); // Allocate it a unique ID do { t->id = ++fc_next_id; } while (!t->id || fcclient_find_by_id(t->id)); // Populate some params t->chan = chan; t->server = server; // Get a security id t->sec_id = sec_id; // Link it in to global list t->next_all_list = fc_clients; fc_clients = t; // Link it in to channel list t->next_chan_list = fc->clients; fc->clients = t; // Update channel if needed if (server) fc->has_server = TRUE; return t; } static void fcclient_free(struct fc_client *fc) { struct fc_client *t = fc_clients; struct fc_channel *tc = fcchan_get(fc->chan, FALSE); //remove from global list while (t && t->next_all_list != fc) t = t->next_all_list; if (!t && fc != fc_clients) return; /* prevent double-free */ if (t) t->next_all_list = fc->next_all_list; else fc_clients = fc->next_all_list; //remove from channel list if (tc) { t = tc->clients; while (t && t->next_chan_list != fc) t = t->next_chan_list; if (t) t->next_chan_list = fc->next_chan_list; else tc->clients = fc->next_chan_list; //if was server then channel no longer has a server if (fc->server) tc->has_server = FALSE; } //free security id bta_jv_free_sec_id(&fc->sec_id); osi_free(fc); } static void fcchan_conn_chng_cbk(UINT16 chan, BD_ADDR bd_addr, BOOLEAN connected, UINT16 reason, tBT_TRANSPORT transport) { tBTA_JV init_evt; tBTA_JV open_evt; struct fc_channel *tc; struct fc_client *t = NULL, *new_conn; tBTA_JV_L2CAP_CBACK *p_cback = NULL; char call_init = FALSE; void *user_data = NULL; tc = fcchan_get(chan, FALSE); if (tc) { t = fcclient_find_by_addr(tc->clients, bd_addr); // try to find an open socked for that addr if (t) { p_cback = t->p_cback; user_data = t->user_data; } else { t = fcclient_find_by_addr(tc->clients, NULL); // try to find a listening socked for that channel if (t) { //found: create a normal connection socket and assign the connection to it new_conn = fcclient_alloc(chan, FALSE, &t->sec_id); if (new_conn){ memcpy(&new_conn->remote_addr, bd_addr, sizeof(new_conn->remote_addr)); new_conn->p_cback = NULL; //for now new_conn->init_called = TRUE; /*nop need to do it again */ p_cback = t->p_cback; user_data = t->user_data; t = new_conn; } } else { //drop it return; } } } if (t) { if (!t->init_called) { call_init = TRUE; t->init_called = TRUE; init_evt.l2c_cl_init.handle = t->id; init_evt.l2c_cl_init.status = BTA_JV_SUCCESS; init_evt.l2c_cl_init.sec_id = t->sec_id; } open_evt.l2c_open.handle = t->id; open_evt.l2c_open.tx_mtu = 23; /* 23, why not ?*/ memcpy(&open_evt.l2c_le_open.rem_bda, &t->remote_addr, sizeof(open_evt.l2c_le_open.rem_bda)); open_evt.l2c_le_open.p_p_cback = (void**)&t->p_cback; open_evt.l2c_le_open.p_user_data = &t->user_data; open_evt.l2c_le_open.status = BTA_JV_SUCCESS; if (connected) { open_evt.l2c_open.status = BTA_JV_SUCCESS; } else { fcclient_free(t); open_evt.l2c_open.status = BTA_JV_FAILURE; } } if (call_init) p_cback(BTA_JV_L2CAP_CL_INIT_EVT, &init_evt, user_data); //call this with lock taken so socket does not disappear from under us */ if (p_cback) { p_cback(BTA_JV_L2CAP_OPEN_EVT, &open_evt, user_data); if (!t->p_cback) /* no callback set, means they do not want this one... */ fcclient_free(t); } } static void fcchan_data_cbk(UINT16 chan, BD_ADDR bd_addr, BT_HDR *p_buf) { tBTA_JV evt_data; struct fc_channel *tc; struct fc_client *t = NULL; tBTA_JV_L2CAP_CBACK *sock_cback = NULL; void *sock_user_data; tc = fcchan_get(chan, FALSE); if (tc) { t = fcclient_find_by_addr(tc->clients, bd_addr); // try to find an open socked for that addr and channel if (!t) { //no socket -> drop it return; } } sock_cback = t->p_cback; sock_user_data = t->user_data; evt_data.le_data_ind.handle = t->id; evt_data.le_data_ind.p_buf = p_buf; if (sock_cback) sock_cback(BTA_JV_L2CAP_DATA_IND_EVT, &evt_data, sock_user_data); } /******************************************************************************* ** ** Function bta_jv_l2cap_connect_le ** ** Description makes an le l2cap client connection ** ** Returns void ** *******************************************************************************/ void bta_jv_l2cap_connect_le(tBTA_JV_MSG *p_data) { tBTA_JV_API_L2CAP_CONNECT *cc = &(p_data->l2cap_connect); tBTA_JV evt; uint32_t id; char call_init_f = TRUE; struct fc_client *t; evt.l2c_cl_init.handle = GAP_INVALID_HANDLE; evt.l2c_cl_init.status = BTA_JV_FAILURE; t = fcclient_alloc(cc->remote_chan, FALSE, NULL); if (!t) { cc->p_cback(BTA_JV_L2CAP_CL_INIT_EVT, &evt, cc->user_data); return; } t->p_cback = cc->p_cback; t->user_data = cc->user_data; memcpy(&t->remote_addr, &cc->peer_bd_addr, sizeof(t->remote_addr)); id = t->id; t->init_called = FALSE; if (L2CA_ConnectFixedChnl(t->chan, t->remote_addr)) { evt.l2c_cl_init.status = BTA_JV_SUCCESS; evt.l2c_cl_init.handle = id; } //it could have been deleted/moved from under us, so re-find it */ t = fcclient_find_by_id(id); if (t) { if (evt.l2c_cl_init.status == BTA_JV_SUCCESS) call_init_f = !t->init_called; else fcclient_free(t); } if (call_init_f) cc->p_cback(BTA_JV_L2CAP_CL_INIT_EVT, &evt, cc->user_data); t->init_called = TRUE; } /******************************************************************************* ** ** Function bta_jv_l2cap_stop_server_le ** ** Description stops an LE L2CAP server ** ** Returns void ** *******************************************************************************/ void bta_jv_l2cap_stop_server_le(tBTA_JV_MSG *p_data) { tBTA_JV evt; tBTA_JV_API_L2CAP_SERVER *ls = &(p_data->l2cap_server); tBTA_JV_L2CAP_CBACK *p_cback = NULL; struct fc_channel *fcchan; struct fc_client *fcclient; void *user_data; evt.l2c_close.status = BTA_JV_FAILURE; evt.l2c_close.async = FALSE; evt.l2c_close.handle = GAP_INVALID_HANDLE; fcchan = fcchan_get(ls->local_chan, FALSE); if (fcchan) { while((fcclient = fcchan->clients)) { p_cback = fcclient->p_cback; user_data = fcclient->user_data; evt.l2c_close.handle = fcclient->id; evt.l2c_close.status = BTA_JV_SUCCESS; evt.l2c_close.async = FALSE; fcclient_free(fcclient); if (p_cback) p_cback(BTA_JV_L2CAP_CLOSE_EVT, &evt, user_data); } } } /******************************************************************************* ** ** Function bta_jv_l2cap_start_server_le ** ** Description starts an LE L2CAP server ** ** Returns void ** *******************************************************************************/ void bta_jv_l2cap_start_server_le(tBTA_JV_MSG *p_data) { tBTA_JV_API_L2CAP_SERVER *ss = &(p_data->l2cap_server); tBTA_JV_L2CAP_START evt_data; struct fc_client *t; evt_data.handle = GAP_INVALID_HANDLE; evt_data.status = BTA_JV_FAILURE; t = fcclient_alloc(ss->local_chan, TRUE, NULL); if (!t) goto out; t->p_cback = ss->p_cback; t->user_data = ss->user_data; //if we got here, we're registered... evt_data.status = BTA_JV_SUCCESS; evt_data.handle = t->id; evt_data.sec_id = t->sec_id; out: ss->p_cback(BTA_JV_L2CAP_START_EVT, (tBTA_JV *)&evt_data, ss->user_data); } /******************************************************************************* ** ** Function bta_jv_l2cap_close_fixed ** ** Description close a fixed channel connection. calls no callbacks. idempotent ** ** Returns void ** *******************************************************************************/ extern void bta_jv_l2cap_close_fixed (tBTA_JV_MSG *p_data) { tBTA_JV_API_L2CAP_CLOSE *cc = &(p_data->l2cap_close); struct fc_client *t; t = fcclient_find_by_id(cc->handle); if (t) fcclient_free(t); }