1 /* 2 * WPA Supplicant / Network configuration structures 3 * Copyright (c) 2003-2013, Jouni Malinen <j@w1.fi> 4 * 5 * This software may be distributed under the terms of the BSD license. 6 * See README for more details. 7 */ 8 9 #ifndef CONFIG_SSID_H 10 #define CONFIG_SSID_H 11 12 #include "common/defs.h" 13 #include "utils/list.h" 14 #include "eap_peer/eap_config.h" 15 16 17 #define DEFAULT_EAP_WORKAROUND ((unsigned int) -1) 18 #define DEFAULT_EAPOL_FLAGS (EAPOL_FLAG_REQUIRE_KEY_UNICAST | \ 19 EAPOL_FLAG_REQUIRE_KEY_BROADCAST) 20 #define DEFAULT_PROTO (WPA_PROTO_WPA | WPA_PROTO_RSN) 21 #define DEFAULT_KEY_MGMT (WPA_KEY_MGMT_PSK | WPA_KEY_MGMT_IEEE8021X) 22 #define DEFAULT_PAIRWISE (WPA_CIPHER_CCMP | WPA_CIPHER_TKIP) 23 #define DEFAULT_GROUP (WPA_CIPHER_CCMP | WPA_CIPHER_TKIP) 24 #define DEFAULT_FRAGMENT_SIZE 1398 25 26 #define DEFAULT_BG_SCAN_PERIOD -1 27 #define DEFAULT_MESH_MAX_RETRIES 2 28 #define DEFAULT_MESH_RETRY_TIMEOUT 40 29 #define DEFAULT_MESH_CONFIRM_TIMEOUT 40 30 #define DEFAULT_MESH_HOLDING_TIMEOUT 40 31 #define DEFAULT_DISABLE_HT 0 32 #define DEFAULT_DISABLE_HT40 0 33 #define DEFAULT_DISABLE_SGI 0 34 #define DEFAULT_DISABLE_LDPC 0 35 #define DEFAULT_DISABLE_MAX_AMSDU -1 /* no change */ 36 #define DEFAULT_AMPDU_FACTOR -1 /* no change */ 37 #define DEFAULT_AMPDU_DENSITY -1 /* no change */ 38 #define DEFAULT_USER_SELECTED_SIM 1 39 40 struct psk_list_entry { 41 struct dl_list list; 42 u8 addr[ETH_ALEN]; 43 u8 psk[32]; 44 u8 p2p; 45 }; 46 47 /** 48 * struct wpa_ssid - Network configuration data 49 * 50 * This structure includes all the configuration variables for a network. This 51 * data is included in the per-interface configuration data as an element of 52 * the network list, struct wpa_config::ssid. Each network block in the 53 * configuration is mapped to a struct wpa_ssid instance. 54 */ 55 struct wpa_ssid { 56 /** 57 * next - Next network in global list 58 * 59 * This pointer can be used to iterate over all networks. The head of 60 * this list is stored in the ssid field of struct wpa_config. 61 */ 62 struct wpa_ssid *next; 63 64 /** 65 * pnext - Next network in per-priority list 66 * 67 * This pointer can be used to iterate over all networks in the same 68 * priority class. The heads of these list are stored in the pssid 69 * fields of struct wpa_config. 70 */ 71 struct wpa_ssid *pnext; 72 73 /** 74 * id - Unique id for the network 75 * 76 * This identifier is used as a unique identifier for each network 77 * block when using the control interface. Each network is allocated an 78 * id when it is being created, either when reading the configuration 79 * file or when a new network is added through the control interface. 80 */ 81 int id; 82 83 /** 84 * priority - Priority group 85 * 86 * By default, all networks will get same priority group (0). If some 87 * of the networks are more desirable, this field can be used to change 88 * the order in which wpa_supplicant goes through the networks when 89 * selecting a BSS. The priority groups will be iterated in decreasing 90 * priority (i.e., the larger the priority value, the sooner the 91 * network is matched against the scan results). Within each priority 92 * group, networks will be selected based on security policy, signal 93 * strength, etc. 94 * 95 * Please note that AP scanning with scan_ssid=1 and ap_scan=2 mode are 96 * not using this priority to select the order for scanning. Instead, 97 * they try the networks in the order that used in the configuration 98 * file. 99 */ 100 int priority; 101 102 /** 103 * ssid - Service set identifier (network name) 104 * 105 * This is the SSID for the network. For wireless interfaces, this is 106 * used to select which network will be used. If set to %NULL (or 107 * ssid_len=0), any SSID can be used. For wired interfaces, this must 108 * be set to %NULL. Note: SSID may contain any characters, even nul 109 * (ASCII 0) and as such, this should not be assumed to be a nul 110 * terminated string. ssid_len defines how many characters are valid 111 * and the ssid field is not guaranteed to be nul terminated. 112 */ 113 u8 *ssid; 114 115 /** 116 * ssid_len - Length of the SSID 117 */ 118 size_t ssid_len; 119 120 /** 121 * bssid - BSSID 122 * 123 * If set, this network block is used only when associating with the AP 124 * using the configured BSSID 125 * 126 * If this is a persistent P2P group (disabled == 2), this is the GO 127 * Device Address. 128 */ 129 u8 bssid[ETH_ALEN]; 130 131 /** 132 * bssid_blacklist - List of inacceptable BSSIDs 133 */ 134 u8 *bssid_blacklist; 135 size_t num_bssid_blacklist; 136 137 /** 138 * bssid_blacklist - List of acceptable BSSIDs 139 */ 140 u8 *bssid_whitelist; 141 size_t num_bssid_whitelist; 142 143 /** 144 * bssid_set - Whether BSSID is configured for this network 145 */ 146 int bssid_set; 147 148 /** 149 * go_p2p_dev_addr - GO's P2P Device Address or all zeros if not set 150 */ 151 u8 go_p2p_dev_addr[ETH_ALEN]; 152 153 /** 154 * psk - WPA pre-shared key (256 bits) 155 */ 156 u8 psk[32]; 157 158 /** 159 * psk_set - Whether PSK field is configured 160 */ 161 int psk_set; 162 163 /** 164 * passphrase - WPA ASCII passphrase 165 * 166 * If this is set, psk will be generated using the SSID and passphrase 167 * configured for the network. ASCII passphrase must be between 8 and 168 * 63 characters (inclusive). 169 */ 170 char *passphrase; 171 172 /** 173 * ext_psk - PSK/passphrase name in external storage 174 * 175 * If this is set, PSK/passphrase will be fetched from external storage 176 * when requesting association with the network. 177 */ 178 char *ext_psk; 179 180 /** 181 * mem_only_psk - Whether to keep PSK/passphrase only in memory 182 * 183 * 0 = allow psk/passphrase to be stored to the configuration file 184 * 1 = do not store psk/passphrase to the configuration file 185 */ 186 int mem_only_psk; 187 188 /** 189 * pairwise_cipher - Bitfield of allowed pairwise ciphers, WPA_CIPHER_* 190 */ 191 int pairwise_cipher; 192 193 /** 194 * group_cipher - Bitfield of allowed group ciphers, WPA_CIPHER_* 195 */ 196 int group_cipher; 197 198 /** 199 * key_mgmt - Bitfield of allowed key management protocols 200 * 201 * WPA_KEY_MGMT_* 202 */ 203 int key_mgmt; 204 205 /** 206 * bg_scan_period - Background scan period in seconds, 0 to disable, or 207 * -1 to indicate no change to default driver configuration 208 */ 209 int bg_scan_period; 210 211 /** 212 * proto - Bitfield of allowed protocols, WPA_PROTO_* 213 */ 214 int proto; 215 216 /** 217 * auth_alg - Bitfield of allowed authentication algorithms 218 * 219 * WPA_AUTH_ALG_* 220 */ 221 int auth_alg; 222 223 /** 224 * scan_ssid - Scan this SSID with Probe Requests 225 * 226 * scan_ssid can be used to scan for APs using hidden SSIDs. 227 * Note: Many drivers do not support this. ap_mode=2 can be used with 228 * such drivers to use hidden SSIDs. Note2: Most nl80211-based drivers 229 * do support scan_ssid=1 and that should be used with them instead of 230 * ap_scan=2. 231 */ 232 int scan_ssid; 233 234 #ifdef IEEE8021X_EAPOL 235 #define EAPOL_FLAG_REQUIRE_KEY_UNICAST BIT(0) 236 #define EAPOL_FLAG_REQUIRE_KEY_BROADCAST BIT(1) 237 /** 238 * eapol_flags - Bit field of IEEE 802.1X/EAPOL options (EAPOL_FLAG_*) 239 */ 240 int eapol_flags; 241 242 /** 243 * eap - EAP peer configuration for this network 244 */ 245 struct eap_peer_config eap; 246 #endif /* IEEE8021X_EAPOL */ 247 248 #define NUM_WEP_KEYS 4 249 #define MAX_WEP_KEY_LEN 16 250 /** 251 * wep_key - WEP keys 252 */ 253 u8 wep_key[NUM_WEP_KEYS][MAX_WEP_KEY_LEN]; 254 255 /** 256 * wep_key_len - WEP key lengths 257 */ 258 size_t wep_key_len[NUM_WEP_KEYS]; 259 260 /** 261 * wep_tx_keyidx - Default key index for TX frames using WEP 262 */ 263 int wep_tx_keyidx; 264 265 /** 266 * proactive_key_caching - Enable proactive key caching 267 * 268 * This field can be used to enable proactive key caching which is also 269 * known as opportunistic PMKSA caching for WPA2. This is disabled (0) 270 * by default unless default value is changed with the global okc=1 271 * parameter. Enable by setting this to 1. 272 * 273 * Proactive key caching is used to make supplicant assume that the APs 274 * are using the same PMK and generate PMKSA cache entries without 275 * doing RSN pre-authentication. This requires support from the AP side 276 * and is normally used with wireless switches that co-locate the 277 * authenticator. 278 * 279 * Internally, special value -1 is used to indicate that the parameter 280 * was not specified in the configuration (i.e., default behavior is 281 * followed). 282 */ 283 int proactive_key_caching; 284 285 /** 286 * mixed_cell - Whether mixed cells are allowed 287 * 288 * This option can be used to configure whether so called mixed cells, 289 * i.e., networks that use both plaintext and encryption in the same 290 * SSID, are allowed. This is disabled (0) by default. Enable by 291 * setting this to 1. 292 */ 293 int mixed_cell; 294 295 #ifdef IEEE8021X_EAPOL 296 297 /** 298 * leap - Number of EAP methods using LEAP 299 * 300 * This field should be set to 1 if LEAP is enabled. This is used to 301 * select IEEE 802.11 authentication algorithm. 302 */ 303 int leap; 304 305 /** 306 * non_leap - Number of EAP methods not using LEAP 307 * 308 * This field should be set to >0 if any EAP method other than LEAP is 309 * enabled. This is used to select IEEE 802.11 authentication 310 * algorithm. 311 */ 312 int non_leap; 313 314 /** 315 * eap_workaround - EAP workarounds enabled 316 * 317 * wpa_supplicant supports number of "EAP workarounds" to work around 318 * interoperability issues with incorrectly behaving authentication 319 * servers. This is recommended to be enabled by default because some 320 * of the issues are present in large number of authentication servers. 321 * 322 * Strict EAP conformance mode can be configured by disabling 323 * workarounds with eap_workaround = 0. 324 */ 325 unsigned int eap_workaround; 326 327 #endif /* IEEE8021X_EAPOL */ 328 329 /** 330 * mode - IEEE 802.11 operation mode (Infrastucture/IBSS) 331 * 332 * 0 = infrastructure (Managed) mode, i.e., associate with an AP. 333 * 334 * 1 = IBSS (ad-hoc, peer-to-peer) 335 * 336 * 2 = AP (access point) 337 * 338 * 3 = P2P Group Owner (can be set in the configuration file) 339 * 340 * 4 = P2P Group Formation (used internally; not in configuration 341 * files) 342 * 343 * 5 = Mesh 344 * 345 * Note: IBSS can only be used with key_mgmt NONE (plaintext and static 346 * WEP) and WPA-PSK (with proto=RSN). In addition, key_mgmt=WPA-NONE 347 * (fixed group key TKIP/CCMP) is available for backwards compatibility, 348 * but its use is deprecated. WPA-None requires following network block 349 * options: proto=WPA, key_mgmt=WPA-NONE, pairwise=NONE, group=TKIP (or 350 * CCMP, but not both), and psk must also be set (either directly or 351 * using ASCII passphrase). 352 */ 353 enum wpas_mode { 354 WPAS_MODE_INFRA = 0, 355 WPAS_MODE_IBSS = 1, 356 WPAS_MODE_AP = 2, 357 WPAS_MODE_P2P_GO = 3, 358 WPAS_MODE_P2P_GROUP_FORMATION = 4, 359 WPAS_MODE_MESH = 5, 360 } mode; 361 362 /** 363 * pbss - Whether to use PBSS. Relevant to DMG networks only. 364 * Used together with mode configuration. When mode is AP, it 365 * means to start a PCP instead of a regular AP. When mode is INFRA it 366 * means connect to a PCP instead of AP. P2P_GO and P2P_GROUP_FORMATION 367 * modes must use PBSS in DMG network. 368 */ 369 int pbss; 370 371 /** 372 * disabled - Whether this network is currently disabled 373 * 374 * 0 = this network can be used (default). 375 * 1 = this network block is disabled (can be enabled through 376 * ctrl_iface, e.g., with wpa_cli or wpa_gui). 377 * 2 = this network block includes parameters for a persistent P2P 378 * group (can be used with P2P ctrl_iface commands) 379 */ 380 int disabled; 381 382 /** 383 * disabled_for_connect - Whether this network was temporarily disabled 384 * 385 * This flag is used to reenable all the temporarily disabled networks 386 * after either the success or failure of a WPS connection. 387 */ 388 int disabled_for_connect; 389 390 /** 391 * peerkey - Whether PeerKey handshake for direct links is allowed 392 * 393 * This is only used when both RSN/WPA2 and IEEE 802.11e (QoS) are 394 * enabled. 395 * 396 * 0 = disabled (default) 397 * 1 = enabled 398 */ 399 int peerkey; 400 401 /** 402 * id_str - Network identifier string for external scripts 403 * 404 * This value is passed to external ctrl_iface monitors in 405 * WPA_EVENT_CONNECTED event and wpa_cli sets this as WPA_ID_STR 406 * environment variable for action scripts. 407 */ 408 char *id_str; 409 410 #ifdef CONFIG_IEEE80211W 411 /** 412 * ieee80211w - Whether management frame protection is enabled 413 * 414 * This value is used to configure policy for management frame 415 * protection (IEEE 802.11w). 0 = disabled, 1 = optional, 2 = required. 416 * This is disabled by default unless the default value has been changed 417 * with the global pmf=1/2 parameter. 418 * 419 * Internally, special value 3 is used to indicate that the parameter 420 * was not specified in the configuration (i.e., default behavior is 421 * followed). 422 */ 423 enum mfp_options ieee80211w; 424 #endif /* CONFIG_IEEE80211W */ 425 426 /** 427 * frequency - Channel frequency in megahertz (MHz) for IBSS 428 * 429 * This value is used to configure the initial channel for IBSS (adhoc) 430 * networks, e.g., 2412 = IEEE 802.11b/g channel 1. It is ignored in 431 * the infrastructure mode. In addition, this value is only used by the 432 * station that creates the IBSS. If an IBSS network with the 433 * configured SSID is already present, the frequency of the network 434 * will be used instead of this configured value. 435 */ 436 int frequency; 437 438 /** 439 * fixed_freq - Use fixed frequency for IBSS 440 */ 441 int fixed_freq; 442 443 #ifdef CONFIG_ACS 444 /** 445 * ACS - Automatic Channel Selection for AP mode 446 * 447 * If present, it will be handled together with frequency. 448 * frequency will be used to determine hardware mode only, when it is 449 * used for both hardware mode and channel when used alone. This will 450 * force the channel to be set to 0, thus enabling ACS. 451 */ 452 int acs; 453 #endif /* CONFIG_ACS */ 454 455 /** 456 * mesh_basic_rates - BSS Basic rate set for mesh network 457 * 458 */ 459 int *mesh_basic_rates; 460 461 /** 462 * Mesh network plink parameters 463 */ 464 int dot11MeshMaxRetries; 465 int dot11MeshRetryTimeout; /* msec */ 466 int dot11MeshConfirmTimeout; /* msec */ 467 int dot11MeshHoldingTimeout; /* msec */ 468 469 int ht40; 470 471 int vht; 472 473 u8 max_oper_chwidth; 474 475 unsigned int vht_center_freq2; 476 477 /** 478 * wpa_ptk_rekey - Maximum lifetime for PTK in seconds 479 * 480 * This value can be used to enforce rekeying of PTK to mitigate some 481 * attacks against TKIP deficiencies. 482 */ 483 int wpa_ptk_rekey; 484 485 /** 486 * scan_freq - Array of frequencies to scan or %NULL for all 487 * 488 * This is an optional zero-terminated array of frequencies in 489 * megahertz (MHz) to include in scan requests when searching for this 490 * network. This can be used to speed up scanning when the network is 491 * known to not use all possible channels. 492 */ 493 int *scan_freq; 494 495 /** 496 * bgscan - Background scan and roaming parameters or %NULL if none 497 * 498 * This is an optional set of parameters for background scanning and 499 * roaming within a network (ESS) in following format: 500 * <bgscan module name>:<module parameters> 501 */ 502 char *bgscan; 503 504 /** 505 * ignore_broadcast_ssid - Hide SSID in AP mode 506 * 507 * Send empty SSID in beacons and ignore probe request frames that do 508 * not specify full SSID, i.e., require stations to know SSID. 509 * default: disabled (0) 510 * 1 = send empty (length=0) SSID in beacon and ignore probe request 511 * for broadcast SSID 512 * 2 = clear SSID (ASCII 0), but keep the original length (this may be 513 * required with some clients that do not support empty SSID) and 514 * ignore probe requests for broadcast SSID 515 */ 516 int ignore_broadcast_ssid; 517 518 /** 519 * freq_list - Array of allowed frequencies or %NULL for all 520 * 521 * This is an optional zero-terminated array of frequencies in 522 * megahertz (MHz) to allow for selecting the BSS. If set, scan results 523 * that do not match any of the specified frequencies are not 524 * considered when selecting a BSS. 525 */ 526 int *freq_list; 527 528 /** 529 * p2p_client_list - List of P2P Clients in a persistent group (GO) 530 * 531 * This is a list of P2P Clients (P2P Device Address) that have joined 532 * the persistent group. This is maintained on the GO for persistent 533 * group entries (disabled == 2). 534 */ 535 u8 *p2p_client_list; 536 537 /** 538 * num_p2p_clients - Number of entries in p2p_client_list 539 */ 540 size_t num_p2p_clients; 541 542 #ifndef P2P_MAX_STORED_CLIENTS 543 #define P2P_MAX_STORED_CLIENTS 100 544 #endif /* P2P_MAX_STORED_CLIENTS */ 545 546 /** 547 * psk_list - Per-client PSKs (struct psk_list_entry) 548 */ 549 struct dl_list psk_list; 550 551 /** 552 * p2p_group - Network generated as a P2P group (used internally) 553 */ 554 int p2p_group; 555 556 /** 557 * p2p_persistent_group - Whether this is a persistent group 558 */ 559 int p2p_persistent_group; 560 561 /** 562 * temporary - Whether this network is temporary and not to be saved 563 */ 564 int temporary; 565 566 /** 567 * export_keys - Whether keys may be exported 568 * 569 * This attribute will be set when keys are determined through 570 * WPS or similar so that they may be exported. 571 */ 572 int export_keys; 573 574 #ifdef CONFIG_HT_OVERRIDES 575 /** 576 * disable_ht - Disable HT (IEEE 802.11n) for this network 577 * 578 * By default, use it if it is available, but this can be configured 579 * to 1 to have it disabled. 580 */ 581 int disable_ht; 582 583 /** 584 * disable_ht40 - Disable HT40 for this network 585 * 586 * By default, use it if it is available, but this can be configured 587 * to 1 to have it disabled. 588 */ 589 int disable_ht40; 590 591 /** 592 * disable_sgi - Disable SGI (Short Guard Interval) for this network 593 * 594 * By default, use it if it is available, but this can be configured 595 * to 1 to have it disabled. 596 */ 597 int disable_sgi; 598 599 /** 600 * disable_ldpc - Disable LDPC for this network 601 * 602 * By default, use it if it is available, but this can be configured 603 * to 1 to have it disabled. 604 */ 605 int disable_ldpc; 606 607 /** 608 * ht40_intolerant - Indicate 40 MHz intolerant for this network 609 */ 610 int ht40_intolerant; 611 612 /** 613 * disable_max_amsdu - Disable MAX A-MSDU 614 * 615 * A-MDSU will be 3839 bytes when disabled, or 7935 616 * when enabled (assuming it is otherwise supported) 617 * -1 (default) means do not apply any settings to the kernel. 618 */ 619 int disable_max_amsdu; 620 621 /** 622 * ampdu_factor - Maximum A-MPDU Length Exponent 623 * 624 * Value: 0-3, see 7.3.2.56.3 in IEEE Std 802.11n-2009. 625 */ 626 int ampdu_factor; 627 628 /** 629 * ampdu_density - Minimum A-MPDU Start Spacing 630 * 631 * Value: 0-7, see 7.3.2.56.3 in IEEE Std 802.11n-2009. 632 */ 633 int ampdu_density; 634 635 /** 636 * ht_mcs - Allowed HT-MCS rates, in ASCII hex: ffff0000... 637 * 638 * By default (empty string): Use whatever the OS has configured. 639 */ 640 char *ht_mcs; 641 #endif /* CONFIG_HT_OVERRIDES */ 642 643 #ifdef CONFIG_VHT_OVERRIDES 644 /** 645 * disable_vht - Disable VHT (IEEE 802.11ac) for this network 646 * 647 * By default, use it if it is available, but this can be configured 648 * to 1 to have it disabled. 649 */ 650 int disable_vht; 651 652 /** 653 * vht_capa - VHT capabilities to use 654 */ 655 unsigned int vht_capa; 656 657 /** 658 * vht_capa_mask - mask for VHT capabilities 659 */ 660 unsigned int vht_capa_mask; 661 662 int vht_rx_mcs_nss_1, vht_rx_mcs_nss_2, 663 vht_rx_mcs_nss_3, vht_rx_mcs_nss_4, 664 vht_rx_mcs_nss_5, vht_rx_mcs_nss_6, 665 vht_rx_mcs_nss_7, vht_rx_mcs_nss_8; 666 int vht_tx_mcs_nss_1, vht_tx_mcs_nss_2, 667 vht_tx_mcs_nss_3, vht_tx_mcs_nss_4, 668 vht_tx_mcs_nss_5, vht_tx_mcs_nss_6, 669 vht_tx_mcs_nss_7, vht_tx_mcs_nss_8; 670 #endif /* CONFIG_VHT_OVERRIDES */ 671 672 /** 673 * ap_max_inactivity - Timeout in seconds to detect STA's inactivity 674 * 675 * This timeout value is used in AP mode to clean up inactive stations. 676 * By default: 300 seconds. 677 */ 678 int ap_max_inactivity; 679 680 /** 681 * dtim_period - DTIM period in Beacon intervals 682 * By default: 2 683 */ 684 int dtim_period; 685 686 /** 687 * beacon_int - Beacon interval (default: 100 TU) 688 */ 689 int beacon_int; 690 691 /** 692 * auth_failures - Number of consecutive authentication failures 693 */ 694 unsigned int auth_failures; 695 696 /** 697 * disabled_until - Network block disabled until this time if non-zero 698 */ 699 struct os_reltime disabled_until; 700 701 /** 702 * parent_cred - Pointer to parent wpa_cred entry 703 * 704 * This pointer can be used to delete temporary networks when a wpa_cred 705 * that was used to create them is removed. This pointer should not be 706 * dereferences since it may not be updated in all cases. 707 */ 708 void *parent_cred; 709 710 #ifdef CONFIG_MACSEC 711 /** 712 * macsec_policy - Determines the policy for MACsec secure session 713 * 714 * 0: MACsec not in use (default) 715 * 1: MACsec enabled - Should secure, accept key server's advice to 716 * determine whether to use a secure session or not. 717 */ 718 int macsec_policy; 719 #endif /* CONFIG_MACSEC */ 720 721 #ifdef CONFIG_HS20 722 int update_identifier; 723 #endif /* CONFIG_HS20 */ 724 725 unsigned int wps_run; 726 727 /** 728 * mac_addr - MAC address policy 729 * 730 * 0 = use permanent MAC address 731 * 1 = use random MAC address for each ESS connection 732 * 2 = like 1, but maintain OUI (with local admin bit set) 733 * 734 * Internally, special value -1 is used to indicate that the parameter 735 * was not specified in the configuration (i.e., default behavior is 736 * followed). 737 */ 738 int mac_addr; 739 740 /** 741 * no_auto_peer - Do not automatically peer with compatible mesh peers 742 * 743 * When unset, the reception of a beacon from a another mesh peer in 744 * this MBSS will trigger a peering attempt. 745 */ 746 int no_auto_peer; 747 }; 748 749 #endif /* CONFIG_SSID_H */ 750