1 /*
2  * Copyright (C) 2012 The Android Open Source Project
3  *
4  * Licensed under the Apache License, Version 2.0 (the "License");
5  * you may not use this file except in compliance with the License.
6  * You may obtain a copy of the License at
7  *
8  *      http://www.apache.org/licenses/LICENSE-2.0
9  *
10  * Unless required by applicable law or agreed to in writing, software
11  * distributed under the License is distributed on an "AS IS" BASIS,
12  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13  * See the License for the specific language governing permissions and
14  * limitations under the License.
15  */
16 
17 #include <stdio.h>
18 #include <stdlib.h>
19 #include <string.h>
20 #include <unistd.h>
21 #include <fcntl.h>
22 #include <ctype.h>
23 #include <sys/mount.h>
24 #include <sys/stat.h>
25 #include <errno.h>
26 #include <sys/types.h>
27 #include <sys/wait.h>
28 #include <libgen.h>
29 #include <time.h>
30 #include <sys/swap.h>
31 #include <dirent.h>
32 #include <ext4.h>
33 #include <ext4_sb.h>
34 #include <ext4_crypt_init_extensions.h>
35 
36 #include <linux/loop.h>
37 #include <private/android_filesystem_config.h>
38 #include <cutils/android_reboot.h>
39 #include <cutils/partition_utils.h>
40 #include <cutils/properties.h>
41 #include <logwrap/logwrap.h>
42 
43 #include "mincrypt/rsa.h"
44 #include "mincrypt/sha.h"
45 #include "mincrypt/sha256.h"
46 
47 #include "ext4_utils.h"
48 #include "wipe.h"
49 
50 #include "fs_mgr_priv.h"
51 #include "fs_mgr_priv_verity.h"
52 
53 #define KEY_LOC_PROP   "ro.crypto.keyfile.userdata"
54 #define KEY_IN_FOOTER  "footer"
55 
56 #define E2FSCK_BIN      "/system/bin/e2fsck"
57 #define F2FS_FSCK_BIN  "/system/bin/fsck.f2fs"
58 #define MKSWAP_BIN      "/system/bin/mkswap"
59 
60 #define FSCK_LOG_FILE   "/dev/fscklogs/log"
61 
62 #define ZRAM_CONF_DEV   "/sys/block/zram0/disksize"
63 
64 #define ARRAY_SIZE(a) (sizeof(a) / sizeof(*(a)))
65 
66 /*
67  * gettime() - returns the time in seconds of the system's monotonic clock or
68  * zero on error.
69  */
gettime(void)70 static time_t gettime(void)
71 {
72     struct timespec ts;
73     int ret;
74 
75     ret = clock_gettime(CLOCK_MONOTONIC, &ts);
76     if (ret < 0) {
77         ERROR("clock_gettime(CLOCK_MONOTONIC) failed: %s\n", strerror(errno));
78         return 0;
79     }
80 
81     return ts.tv_sec;
82 }
83 
wait_for_file(const char * filename,int timeout)84 static int wait_for_file(const char *filename, int timeout)
85 {
86     struct stat info;
87     time_t timeout_time = gettime() + timeout;
88     int ret = -1;
89 
90     while (gettime() < timeout_time && ((ret = stat(filename, &info)) < 0))
91         usleep(10000);
92 
93     return ret;
94 }
95 
check_fs(char * blk_device,char * fs_type,char * target)96 static void check_fs(char *blk_device, char *fs_type, char *target)
97 {
98     int status;
99     int ret;
100     long tmpmnt_flags = MS_NOATIME | MS_NOEXEC | MS_NOSUID;
101     char tmpmnt_opts[64] = "errors=remount-ro";
102     char *e2fsck_argv[] = {
103         E2FSCK_BIN,
104         "-f",
105         "-y",
106         blk_device
107     };
108 
109     /* Check for the types of filesystems we know how to check */
110     if (!strcmp(fs_type, "ext2") || !strcmp(fs_type, "ext3") || !strcmp(fs_type, "ext4")) {
111         /*
112          * First try to mount and unmount the filesystem.  We do this because
113          * the kernel is more efficient than e2fsck in running the journal and
114          * processing orphaned inodes, and on at least one device with a
115          * performance issue in the emmc firmware, it can take e2fsck 2.5 minutes
116          * to do what the kernel does in about a second.
117          *
118          * After mounting and unmounting the filesystem, run e2fsck, and if an
119          * error is recorded in the filesystem superblock, e2fsck will do a full
120          * check.  Otherwise, it does nothing.  If the kernel cannot mount the
121          * filesytsem due to an error, e2fsck is still run to do a full check
122          * fix the filesystem.
123          */
124         errno = 0;
125         if (!strcmp(fs_type, "ext4")) {
126             // This option is only valid with ext4
127             strlcat(tmpmnt_opts, ",nomblk_io_submit", sizeof(tmpmnt_opts));
128         }
129         ret = mount(blk_device, target, fs_type, tmpmnt_flags, tmpmnt_opts);
130         INFO("%s(): mount(%s,%s,%s)=%d: %s\n",
131              __func__, blk_device, target, fs_type, ret, strerror(errno));
132         if (!ret) {
133             int i;
134             for (i = 0; i < 5; i++) {
135                 // Try to umount 5 times before continuing on.
136                 // Should we try rebooting if all attempts fail?
137                 int result = umount(target);
138                 if (result == 0) {
139                     INFO("%s(): unmount(%s) succeeded\n", __func__, target);
140                     break;
141                 }
142                 ERROR("%s(): umount(%s)=%d: %s\n", __func__, target, result, strerror(errno));
143                 sleep(1);
144             }
145         }
146 
147         /*
148          * Some system images do not have e2fsck for licensing reasons
149          * (e.g. recent SDK system images). Detect these and skip the check.
150          */
151         if (access(E2FSCK_BIN, X_OK)) {
152             INFO("Not running %s on %s (executable not in system image)\n",
153                  E2FSCK_BIN, blk_device);
154         } else {
155             INFO("Running %s on %s\n", E2FSCK_BIN, blk_device);
156 
157             ret = android_fork_execvp_ext(ARRAY_SIZE(e2fsck_argv), e2fsck_argv,
158                                           &status, true, LOG_KLOG | LOG_FILE,
159                                           true, FSCK_LOG_FILE, NULL, 0);
160 
161             if (ret < 0) {
162                 /* No need to check for error in fork, we can't really handle it now */
163                 ERROR("Failed trying to run %s\n", E2FSCK_BIN);
164             }
165         }
166     } else if (!strcmp(fs_type, "f2fs")) {
167             char *f2fs_fsck_argv[] = {
168                     F2FS_FSCK_BIN,
169                     "-a",
170                     blk_device
171             };
172         INFO("Running %s -a %s\n", F2FS_FSCK_BIN, blk_device);
173 
174         ret = android_fork_execvp_ext(ARRAY_SIZE(f2fs_fsck_argv), f2fs_fsck_argv,
175                                       &status, true, LOG_KLOG | LOG_FILE,
176                                       true, FSCK_LOG_FILE, NULL, 0);
177         if (ret < 0) {
178             /* No need to check for error in fork, we can't really handle it now */
179             ERROR("Failed trying to run %s\n", F2FS_FSCK_BIN);
180         }
181     }
182 
183     return;
184 }
185 
remove_trailing_slashes(char * n)186 static void remove_trailing_slashes(char *n)
187 {
188     int len;
189 
190     len = strlen(n) - 1;
191     while ((*(n + len) == '/') && len) {
192       *(n + len) = '\0';
193       len--;
194     }
195 }
196 
197 /*
198  * Mark the given block device as read-only, using the BLKROSET ioctl.
199  * Return 0 on success, and -1 on error.
200  */
fs_mgr_set_blk_ro(const char * blockdev)201 int fs_mgr_set_blk_ro(const char *blockdev)
202 {
203     int fd;
204     int rc = -1;
205     int ON = 1;
206 
207     fd = TEMP_FAILURE_RETRY(open(blockdev, O_RDONLY | O_CLOEXEC));
208     if (fd < 0) {
209         // should never happen
210         return rc;
211     }
212 
213     rc = ioctl(fd, BLKROSET, &ON);
214     close(fd);
215 
216     return rc;
217 }
218 
219 /*
220  * __mount(): wrapper around the mount() system call which also
221  * sets the underlying block device to read-only if the mount is read-only.
222  * See "man 2 mount" for return values.
223  */
__mount(const char * source,const char * target,const struct fstab_rec * rec)224 static int __mount(const char *source, const char *target, const struct fstab_rec *rec)
225 {
226     unsigned long mountflags = rec->flags;
227     int ret;
228     int save_errno;
229 
230     /* We need this because sometimes we have legacy symlinks
231      * that are lingering around and need cleaning up.
232      */
233     struct stat info;
234     if (!lstat(target, &info))
235         if ((info.st_mode & S_IFMT) == S_IFLNK)
236             unlink(target);
237     mkdir(target, 0755);
238     ret = mount(source, target, rec->fs_type, mountflags, rec->fs_options);
239     save_errno = errno;
240     INFO("%s(source=%s,target=%s,type=%s)=%d\n", __func__, source, target, rec->fs_type, ret);
241     if ((ret == 0) && (mountflags & MS_RDONLY) != 0) {
242         fs_mgr_set_blk_ro(source);
243     }
244     errno = save_errno;
245     return ret;
246 }
247 
fs_match(char * in1,char * in2)248 static int fs_match(char *in1, char *in2)
249 {
250     char *n1;
251     char *n2;
252     int ret;
253 
254     n1 = strdup(in1);
255     n2 = strdup(in2);
256 
257     remove_trailing_slashes(n1);
258     remove_trailing_slashes(n2);
259 
260     ret = !strcmp(n1, n2);
261 
262     free(n1);
263     free(n2);
264 
265     return ret;
266 }
267 
device_is_debuggable()268 static int device_is_debuggable() {
269     int ret = -1;
270     char value[PROP_VALUE_MAX];
271     ret = __system_property_get("ro.debuggable", value);
272     if (ret < 0)
273         return ret;
274     return strcmp(value, "1") ? 0 : 1;
275 }
276 
device_is_secure()277 static int device_is_secure() {
278     int ret = -1;
279     char value[PROP_VALUE_MAX];
280     ret = __system_property_get("ro.secure", value);
281     /* If error, we want to fail secure */
282     if (ret < 0)
283         return 1;
284     return strcmp(value, "0") ? 1 : 0;
285 }
286 
device_is_force_encrypted()287 static int device_is_force_encrypted() {
288     int ret = -1;
289     char value[PROP_VALUE_MAX];
290     ret = __system_property_get("ro.vold.forceencryption", value);
291     if (ret < 0)
292         return 0;
293     return strcmp(value, "1") ? 0 : 1;
294 }
295 
296 /*
297  * Tries to mount any of the consecutive fstab entries that match
298  * the mountpoint of the one given by fstab->recs[start_idx].
299  *
300  * end_idx: On return, will be the last rec that was looked at.
301  * attempted_idx: On return, will indicate which fstab rec
302  *     succeeded. In case of failure, it will be the start_idx.
303  * Returns
304  *   -1 on failure with errno set to match the 1st mount failure.
305  *   0 on success.
306  */
mount_with_alternatives(struct fstab * fstab,int start_idx,int * end_idx,int * attempted_idx)307 static int mount_with_alternatives(struct fstab *fstab, int start_idx, int *end_idx, int *attempted_idx)
308 {
309     int i;
310     int mount_errno = 0;
311     int mounted = 0;
312 
313     if (!end_idx || !attempted_idx || start_idx >= fstab->num_entries) {
314       errno = EINVAL;
315       if (end_idx) *end_idx = start_idx;
316       if (attempted_idx) *end_idx = start_idx;
317       return -1;
318     }
319 
320     /* Hunt down an fstab entry for the same mount point that might succeed */
321     for (i = start_idx;
322          /* We required that fstab entries for the same mountpoint be consecutive */
323          i < fstab->num_entries && !strcmp(fstab->recs[start_idx].mount_point, fstab->recs[i].mount_point);
324          i++) {
325             /*
326              * Don't try to mount/encrypt the same mount point again.
327              * Deal with alternate entries for the same point which are required to be all following
328              * each other.
329              */
330             if (mounted) {
331                 ERROR("%s(): skipping fstab dup mountpoint=%s rec[%d].fs_type=%s already mounted as %s.\n", __func__,
332                      fstab->recs[i].mount_point, i, fstab->recs[i].fs_type, fstab->recs[*attempted_idx].fs_type);
333                 continue;
334             }
335 
336             if (fstab->recs[i].fs_mgr_flags & MF_CHECK) {
337                 check_fs(fstab->recs[i].blk_device, fstab->recs[i].fs_type,
338                          fstab->recs[i].mount_point);
339             }
340             if (!__mount(fstab->recs[i].blk_device, fstab->recs[i].mount_point, &fstab->recs[i])) {
341                 *attempted_idx = i;
342                 mounted = 1;
343                 if (i != start_idx) {
344                     ERROR("%s(): Mounted %s on %s with fs_type=%s instead of %s\n", __func__,
345                          fstab->recs[i].blk_device, fstab->recs[i].mount_point, fstab->recs[i].fs_type,
346                          fstab->recs[start_idx].fs_type);
347                 }
348             } else {
349                 /* back up errno for crypto decisions */
350                 mount_errno = errno;
351             }
352     }
353 
354     /* Adjust i for the case where it was still withing the recs[] */
355     if (i < fstab->num_entries) --i;
356 
357     *end_idx = i;
358     if (!mounted) {
359         *attempted_idx = start_idx;
360         errno = mount_errno;
361         return -1;
362     }
363     return 0;
364 }
365 
translate_ext_labels(struct fstab_rec * rec)366 static int translate_ext_labels(struct fstab_rec *rec)
367 {
368     DIR *blockdir = NULL;
369     struct dirent *ent;
370     char *label;
371     size_t label_len;
372     int ret = -1;
373 
374     if (strncmp(rec->blk_device, "LABEL=", 6))
375         return 0;
376 
377     label = rec->blk_device + 6;
378     label_len = strlen(label);
379 
380     if (label_len > 16) {
381         ERROR("FS label is longer than allowed by filesystem\n");
382         goto out;
383     }
384 
385 
386     blockdir = opendir("/dev/block");
387     if (!blockdir) {
388         ERROR("couldn't open /dev/block\n");
389         goto out;
390     }
391 
392     while ((ent = readdir(blockdir))) {
393         int fd;
394         char super_buf[1024];
395         struct ext4_super_block *sb;
396 
397         if (ent->d_type != DT_BLK)
398             continue;
399 
400         fd = openat(dirfd(blockdir), ent->d_name, O_RDONLY);
401         if (fd < 0) {
402             ERROR("Cannot open block device /dev/block/%s\n", ent->d_name);
403             goto out;
404         }
405 
406         if (TEMP_FAILURE_RETRY(lseek(fd, 1024, SEEK_SET)) < 0 ||
407             TEMP_FAILURE_RETRY(read(fd, super_buf, 1024)) != 1024) {
408             /* Probably a loopback device or something else without a readable
409              * superblock.
410              */
411             close(fd);
412             continue;
413         }
414 
415         sb = (struct ext4_super_block *)super_buf;
416         if (sb->s_magic != EXT4_SUPER_MAGIC) {
417             INFO("/dev/block/%s not ext{234}\n", ent->d_name);
418             continue;
419         }
420 
421         if (!strncmp(label, sb->s_volume_name, label_len)) {
422             char *new_blk_device;
423 
424             if (asprintf(&new_blk_device, "/dev/block/%s", ent->d_name) < 0) {
425                 ERROR("Could not allocate block device string\n");
426                 goto out;
427             }
428 
429             INFO("resolved label %s to %s\n", rec->blk_device, new_blk_device);
430 
431             free(rec->blk_device);
432             rec->blk_device = new_blk_device;
433             ret = 0;
434             break;
435         }
436     }
437 
438 out:
439     closedir(blockdir);
440     return ret;
441 }
442 
needs_block_encryption(const struct fstab_rec * rec)443 static bool needs_block_encryption(const struct fstab_rec* rec)
444 {
445     if (device_is_force_encrypted() && fs_mgr_is_encryptable(rec)) return true;
446     if (rec->fs_mgr_flags & MF_FORCECRYPT) return true;
447     if (rec->fs_mgr_flags & MF_CRYPT) {
448         /* Check for existence of convert_fde breadcrumb file */
449         char convert_fde_name[PATH_MAX];
450         snprintf(convert_fde_name, sizeof(convert_fde_name),
451                  "%s/misc/vold/convert_fde", rec->mount_point);
452         if (access(convert_fde_name, F_OK) == 0) return true;
453     }
454     if (rec->fs_mgr_flags & MF_FORCEFDEORFBE) {
455         /* Check for absence of convert_fbe breadcrumb file */
456         char convert_fbe_name[PATH_MAX];
457         snprintf(convert_fbe_name, sizeof(convert_fbe_name),
458                  "%s/convert_fbe", rec->mount_point);
459         if (access(convert_fbe_name, F_OK) != 0) return true;
460     }
461     return false;
462 }
463 
464 // Check to see if a mountable volume has encryption requirements
handle_encryptable(const struct fstab_rec * rec)465 static int handle_encryptable(const struct fstab_rec* rec)
466 {
467     /* If this is block encryptable, need to trigger encryption */
468     if (needs_block_encryption(rec)) {
469         if (umount(rec->mount_point) == 0) {
470             return FS_MGR_MNTALL_DEV_NEEDS_ENCRYPTION;
471         } else {
472             WARNING("Could not umount %s (%s) - allow continue unencrypted\n",
473                     rec->mount_point, strerror(errno));
474             return FS_MGR_MNTALL_DEV_NOT_ENCRYPTED;
475         }
476     } else if (rec->fs_mgr_flags & (MF_FILEENCRYPTION | MF_FORCEFDEORFBE)) {
477     // Deal with file level encryption
478         INFO("%s is file encrypted\n", rec->mount_point);
479         return FS_MGR_MNTALL_DEV_FILE_ENCRYPTED;
480     } else if (fs_mgr_is_encryptable(rec)) {
481         return FS_MGR_MNTALL_DEV_NOT_ENCRYPTED;
482     } else {
483         return FS_MGR_MNTALL_DEV_NOT_ENCRYPTABLE;
484     }
485 }
486 
487 /* When multiple fstab records share the same mount_point, it will
488  * try to mount each one in turn, and ignore any duplicates after a
489  * first successful mount.
490  * Returns -1 on error, and  FS_MGR_MNTALL_* otherwise.
491  */
fs_mgr_mount_all(struct fstab * fstab)492 int fs_mgr_mount_all(struct fstab *fstab)
493 {
494     int i = 0;
495     int encryptable = FS_MGR_MNTALL_DEV_NOT_ENCRYPTABLE;
496     int error_count = 0;
497     int mret = -1;
498     int mount_errno = 0;
499     int attempted_idx = -1;
500 
501     if (!fstab) {
502         return -1;
503     }
504 
505     for (i = 0; i < fstab->num_entries; i++) {
506         /* Don't mount entries that are managed by vold */
507         if (fstab->recs[i].fs_mgr_flags & (MF_VOLDMANAGED | MF_RECOVERYONLY)) {
508             continue;
509         }
510 
511         /* Skip swap and raw partition entries such as boot, recovery, etc */
512         if (!strcmp(fstab->recs[i].fs_type, "swap") ||
513             !strcmp(fstab->recs[i].fs_type, "emmc") ||
514             !strcmp(fstab->recs[i].fs_type, "mtd")) {
515             continue;
516         }
517 
518         /* Skip mounting the root partition, as it will already have been mounted */
519         if (!strcmp(fstab->recs[i].mount_point, "/")) {
520             if ((fstab->recs[i].fs_mgr_flags & MS_RDONLY) != 0) {
521                 fs_mgr_set_blk_ro(fstab->recs[i].blk_device);
522             }
523             continue;
524         }
525 
526         /* Translate LABEL= file system labels into block devices */
527         if (!strcmp(fstab->recs[i].fs_type, "ext2") ||
528             !strcmp(fstab->recs[i].fs_type, "ext3") ||
529             !strcmp(fstab->recs[i].fs_type, "ext4")) {
530             int tret = translate_ext_labels(&fstab->recs[i]);
531             if (tret < 0) {
532                 ERROR("Could not translate label to block device\n");
533                 continue;
534             }
535         }
536 
537         if (fstab->recs[i].fs_mgr_flags & MF_WAIT) {
538             wait_for_file(fstab->recs[i].blk_device, WAIT_TIMEOUT);
539         }
540 
541         if ((fstab->recs[i].fs_mgr_flags & MF_VERIFY) && device_is_secure()) {
542             int rc = fs_mgr_setup_verity(&fstab->recs[i]);
543             if (device_is_debuggable() && rc == FS_MGR_SETUP_VERITY_DISABLED) {
544                 INFO("Verity disabled");
545             } else if (rc != FS_MGR_SETUP_VERITY_SUCCESS) {
546                 ERROR("Could not set up verified partition, skipping!\n");
547                 continue;
548             }
549         }
550         int last_idx_inspected;
551         int top_idx = i;
552 
553         mret = mount_with_alternatives(fstab, i, &last_idx_inspected, &attempted_idx);
554         i = last_idx_inspected;
555         mount_errno = errno;
556 
557         /* Deal with encryptability. */
558         if (!mret) {
559             int status = handle_encryptable(&fstab->recs[attempted_idx]);
560 
561             if (status == FS_MGR_MNTALL_FAIL) {
562                 /* Fatal error - no point continuing */
563                 return status;
564             }
565 
566             if (status != FS_MGR_MNTALL_DEV_NOT_ENCRYPTABLE) {
567                 if (encryptable != FS_MGR_MNTALL_DEV_NOT_ENCRYPTABLE) {
568                     // Log and continue
569                     ERROR("Only one encryptable/encrypted partition supported\n");
570                 }
571                 encryptable = status;
572             }
573 
574             /* Success!  Go get the next one */
575             continue;
576         }
577 
578         /* mount(2) returned an error, handle the encryptable/formattable case */
579         bool wiped = partition_wiped(fstab->recs[top_idx].blk_device);
580         if (mret && mount_errno != EBUSY && mount_errno != EACCES &&
581             fs_mgr_is_formattable(&fstab->recs[top_idx]) && wiped) {
582             /* top_idx and attempted_idx point at the same partition, but sometimes
583              * at two different lines in the fstab.  Use the top one for formatting
584              * as that is the preferred one.
585              */
586             ERROR("%s(): %s is wiped and %s %s is formattable. Format it.\n", __func__,
587                   fstab->recs[top_idx].blk_device, fstab->recs[top_idx].mount_point,
588                   fstab->recs[top_idx].fs_type);
589             if (fs_mgr_is_encryptable(&fstab->recs[top_idx]) &&
590                 strcmp(fstab->recs[top_idx].key_loc, KEY_IN_FOOTER)) {
591                 int fd = open(fstab->recs[top_idx].key_loc, O_WRONLY, 0644);
592                 if (fd >= 0) {
593                     INFO("%s(): also wipe %s\n", __func__, fstab->recs[top_idx].key_loc);
594                     wipe_block_device(fd, get_file_size(fd));
595                     close(fd);
596                 } else {
597                     ERROR("%s(): %s wouldn't open (%s)\n", __func__,
598                           fstab->recs[top_idx].key_loc, strerror(errno));
599                 }
600             }
601             if (fs_mgr_do_format(&fstab->recs[top_idx]) == 0) {
602                 /* Let's replay the mount actions. */
603                 i = top_idx - 1;
604                 continue;
605             } else {
606                 ERROR("%s(): Format failed. Suggest recovery...\n", __func__);
607                 encryptable = FS_MGR_MNTALL_DEV_NEEDS_RECOVERY;
608                 continue;
609             }
610         }
611         if (mret && mount_errno != EBUSY && mount_errno != EACCES &&
612             fs_mgr_is_encryptable(&fstab->recs[attempted_idx])) {
613             if (wiped) {
614                 ERROR("%s(): %s is wiped and %s %s is encryptable. Suggest recovery...\n", __func__,
615                       fstab->recs[attempted_idx].blk_device, fstab->recs[attempted_idx].mount_point,
616                       fstab->recs[attempted_idx].fs_type);
617                 encryptable = FS_MGR_MNTALL_DEV_NEEDS_RECOVERY;
618                 continue;
619             } else {
620                 /* Need to mount a tmpfs at this mountpoint for now, and set
621                  * properties that vold will query later for decrypting
622                  */
623                 ERROR("%s(): possibly an encryptable blkdev %s for mount %s type %s )\n", __func__,
624                       fstab->recs[attempted_idx].blk_device, fstab->recs[attempted_idx].mount_point,
625                       fstab->recs[attempted_idx].fs_type);
626                 if (fs_mgr_do_tmpfs_mount(fstab->recs[attempted_idx].mount_point) < 0) {
627                     ++error_count;
628                     continue;
629                 }
630             }
631             encryptable = FS_MGR_MNTALL_DEV_MIGHT_BE_ENCRYPTED;
632         } else {
633             if (fs_mgr_is_nofail(&fstab->recs[attempted_idx])) {
634                 ERROR("Ignoring failure to mount an un-encryptable or wiped partition on"
635                        "%s at %s options: %s error: %s\n",
636                        fstab->recs[attempted_idx].blk_device, fstab->recs[attempted_idx].mount_point,
637                        fstab->recs[attempted_idx].fs_options, strerror(mount_errno));
638             } else {
639                 ERROR("Failed to mount an un-encryptable or wiped partition on"
640                        "%s at %s options: %s error: %s\n",
641                        fstab->recs[attempted_idx].blk_device, fstab->recs[attempted_idx].mount_point,
642                        fstab->recs[attempted_idx].fs_options, strerror(mount_errno));
643                 ++error_count;
644             }
645             continue;
646         }
647     }
648 
649     if (error_count) {
650         return -1;
651     } else {
652         return encryptable;
653     }
654 }
655 
656 /* If tmp_mount_point is non-null, mount the filesystem there.  This is for the
657  * tmp mount we do to check the user password
658  * If multiple fstab entries are to be mounted on "n_name", it will try to mount each one
659  * in turn, and stop on 1st success, or no more match.
660  */
fs_mgr_do_mount(struct fstab * fstab,char * n_name,char * n_blk_device,char * tmp_mount_point)661 int fs_mgr_do_mount(struct fstab *fstab, char *n_name, char *n_blk_device,
662                     char *tmp_mount_point)
663 {
664     int i = 0;
665     int ret = FS_MGR_DOMNT_FAILED;
666     int mount_errors = 0;
667     int first_mount_errno = 0;
668     char *m;
669 
670     if (!fstab) {
671         return ret;
672     }
673 
674     for (i = 0; i < fstab->num_entries; i++) {
675         if (!fs_match(fstab->recs[i].mount_point, n_name)) {
676             continue;
677         }
678 
679         /* We found our match */
680         /* If this swap or a raw partition, report an error */
681         if (!strcmp(fstab->recs[i].fs_type, "swap") ||
682             !strcmp(fstab->recs[i].fs_type, "emmc") ||
683             !strcmp(fstab->recs[i].fs_type, "mtd")) {
684             ERROR("Cannot mount filesystem of type %s on %s\n",
685                   fstab->recs[i].fs_type, n_blk_device);
686             goto out;
687         }
688 
689         /* First check the filesystem if requested */
690         if (fstab->recs[i].fs_mgr_flags & MF_WAIT) {
691             wait_for_file(n_blk_device, WAIT_TIMEOUT);
692         }
693 
694         if (fstab->recs[i].fs_mgr_flags & MF_CHECK) {
695             check_fs(n_blk_device, fstab->recs[i].fs_type,
696                      fstab->recs[i].mount_point);
697         }
698 
699         if ((fstab->recs[i].fs_mgr_flags & MF_VERIFY) && device_is_secure()) {
700             int rc = fs_mgr_setup_verity(&fstab->recs[i]);
701             if (device_is_debuggable() && rc == FS_MGR_SETUP_VERITY_DISABLED) {
702                 INFO("Verity disabled");
703             } else if (rc != FS_MGR_SETUP_VERITY_SUCCESS) {
704                 ERROR("Could not set up verified partition, skipping!\n");
705                 continue;
706             }
707         }
708 
709         /* Now mount it where requested */
710         if (tmp_mount_point) {
711             m = tmp_mount_point;
712         } else {
713             m = fstab->recs[i].mount_point;
714         }
715         if (__mount(n_blk_device, m, &fstab->recs[i])) {
716             if (!first_mount_errno) first_mount_errno = errno;
717             mount_errors++;
718             continue;
719         } else {
720             ret = 0;
721             goto out;
722         }
723     }
724     if (mount_errors) {
725         ERROR("Cannot mount filesystem on %s at %s. error: %s\n",
726             n_blk_device, m, strerror(first_mount_errno));
727         if (first_mount_errno == EBUSY) {
728             ret = FS_MGR_DOMNT_BUSY;
729         } else {
730             ret = FS_MGR_DOMNT_FAILED;
731         }
732     } else {
733         /* We didn't find a match, say so and return an error */
734         ERROR("Cannot find mount point %s in fstab\n", fstab->recs[i].mount_point);
735     }
736 
737 out:
738     return ret;
739 }
740 
741 /*
742  * mount a tmpfs filesystem at the given point.
743  * return 0 on success, non-zero on failure.
744  */
fs_mgr_do_tmpfs_mount(char * n_name)745 int fs_mgr_do_tmpfs_mount(char *n_name)
746 {
747     int ret;
748 
749     ret = mount("tmpfs", n_name, "tmpfs",
750                 MS_NOATIME | MS_NOSUID | MS_NODEV, CRYPTO_TMPFS_OPTIONS);
751     if (ret < 0) {
752         ERROR("Cannot mount tmpfs filesystem at %s\n", n_name);
753         return -1;
754     }
755 
756     /* Success */
757     return 0;
758 }
759 
fs_mgr_unmount_all(struct fstab * fstab)760 int fs_mgr_unmount_all(struct fstab *fstab)
761 {
762     int i = 0;
763     int ret = 0;
764 
765     if (!fstab) {
766         return -1;
767     }
768 
769     while (fstab->recs[i].blk_device) {
770         if (umount(fstab->recs[i].mount_point)) {
771             ERROR("Cannot unmount filesystem at %s\n", fstab->recs[i].mount_point);
772             ret = -1;
773         }
774         i++;
775     }
776 
777     return ret;
778 }
779 
780 /* This must be called after mount_all, because the mkswap command needs to be
781  * available.
782  */
fs_mgr_swapon_all(struct fstab * fstab)783 int fs_mgr_swapon_all(struct fstab *fstab)
784 {
785     int i = 0;
786     int flags = 0;
787     int err = 0;
788     int ret = 0;
789     int status;
790     char *mkswap_argv[2] = {
791         MKSWAP_BIN,
792         NULL
793     };
794 
795     if (!fstab) {
796         return -1;
797     }
798 
799     for (i = 0; i < fstab->num_entries; i++) {
800         /* Skip non-swap entries */
801         if (strcmp(fstab->recs[i].fs_type, "swap")) {
802             continue;
803         }
804 
805         if (fstab->recs[i].zram_size > 0) {
806             /* A zram_size was specified, so we need to configure the
807              * device.  There is no point in having multiple zram devices
808              * on a system (all the memory comes from the same pool) so
809              * we can assume the device number is 0.
810              */
811             FILE *zram_fp;
812 
813             zram_fp = fopen(ZRAM_CONF_DEV, "r+");
814             if (zram_fp == NULL) {
815                 ERROR("Unable to open zram conf device %s\n", ZRAM_CONF_DEV);
816                 ret = -1;
817                 continue;
818             }
819             fprintf(zram_fp, "%d\n", fstab->recs[i].zram_size);
820             fclose(zram_fp);
821         }
822 
823         if (fstab->recs[i].fs_mgr_flags & MF_WAIT) {
824             wait_for_file(fstab->recs[i].blk_device, WAIT_TIMEOUT);
825         }
826 
827         /* Initialize the swap area */
828         mkswap_argv[1] = fstab->recs[i].blk_device;
829         err = android_fork_execvp_ext(ARRAY_SIZE(mkswap_argv), mkswap_argv,
830                                       &status, true, LOG_KLOG, false, NULL,
831                                       NULL, 0);
832         if (err) {
833             ERROR("mkswap failed for %s\n", fstab->recs[i].blk_device);
834             ret = -1;
835             continue;
836         }
837 
838         /* If -1, then no priority was specified in fstab, so don't set
839          * SWAP_FLAG_PREFER or encode the priority */
840         if (fstab->recs[i].swap_prio >= 0) {
841             flags = (fstab->recs[i].swap_prio << SWAP_FLAG_PRIO_SHIFT) &
842                     SWAP_FLAG_PRIO_MASK;
843             flags |= SWAP_FLAG_PREFER;
844         } else {
845             flags = 0;
846         }
847         err = swapon(fstab->recs[i].blk_device, flags);
848         if (err) {
849             ERROR("swapon failed for %s\n", fstab->recs[i].blk_device);
850             ret = -1;
851         }
852     }
853 
854     return ret;
855 }
856 
857 /*
858  * key_loc must be at least PROPERTY_VALUE_MAX bytes long
859  *
860  * real_blk_device must be at least PROPERTY_VALUE_MAX bytes long
861  */
fs_mgr_get_crypt_info(struct fstab * fstab,char * key_loc,char * real_blk_device,int size)862 int fs_mgr_get_crypt_info(struct fstab *fstab, char *key_loc, char *real_blk_device, int size)
863 {
864     int i = 0;
865 
866     if (!fstab) {
867         return -1;
868     }
869     /* Initialize return values to null strings */
870     if (key_loc) {
871         *key_loc = '\0';
872     }
873     if (real_blk_device) {
874         *real_blk_device = '\0';
875     }
876 
877     /* Look for the encryptable partition to find the data */
878     for (i = 0; i < fstab->num_entries; i++) {
879         /* Don't deal with vold managed enryptable partitions here */
880         if (fstab->recs[i].fs_mgr_flags & MF_VOLDMANAGED) {
881             continue;
882         }
883         if (!(fstab->recs[i].fs_mgr_flags
884               & (MF_CRYPT | MF_FORCECRYPT | MF_FORCEFDEORFBE))) {
885             continue;
886         }
887 
888         /* We found a match */
889         if (key_loc) {
890             strlcpy(key_loc, fstab->recs[i].key_loc, size);
891         }
892         if (real_blk_device) {
893             strlcpy(real_blk_device, fstab->recs[i].blk_device, size);
894         }
895         break;
896     }
897 
898     return 0;
899 }
900