1 /*
2  *  Copyright (c) 2010 The WebM project authors. All Rights Reserved.
3  *
4  *  Use of this source code is governed by a BSD-style license
5  *  that can be found in the LICENSE file in the root of the source
6  *  tree. An additional intellectual property rights grant can be found
7  *  in the file PATENTS.  All contributing project authors may
8  *  be found in the AUTHORS file in the root of the source tree.
9  */
10 
11 
12 #ifndef VP8_COMMON_ONYX_H_
13 #define VP8_COMMON_ONYX_H_
14 
15 #ifdef __cplusplus
16 extern "C"
17 {
18 #endif
19 
20 #include "vpx_config.h"
21 #include "vpx/internal/vpx_codec_internal.h"
22 #include "vpx/vp8cx.h"
23 #include "vpx/vpx_encoder.h"
24 #include "vpx_scale/yv12config.h"
25 #include "ppflags.h"
26 
27     struct VP8_COMP;
28 
29     /* Create/destroy static data structures. */
30 
31     typedef enum
32     {
33         NORMAL      = 0,
34         FOURFIVE    = 1,
35         THREEFIVE   = 2,
36         ONETWO      = 3
37 
38     } VPX_SCALING;
39 
40     typedef enum
41     {
42         USAGE_LOCAL_FILE_PLAYBACK   = 0x0,
43         USAGE_STREAM_FROM_SERVER    = 0x1,
44         USAGE_CONSTRAINED_QUALITY   = 0x2,
45         USAGE_CONSTANT_QUALITY      = 0x3
46     } END_USAGE;
47 
48 
49     typedef enum
50     {
51         MODE_REALTIME       = 0x0,
52         MODE_GOODQUALITY    = 0x1,
53         MODE_BESTQUALITY    = 0x2,
54         MODE_FIRSTPASS      = 0x3,
55         MODE_SECONDPASS     = 0x4,
56         MODE_SECONDPASS_BEST = 0x5
57     } MODE;
58 
59     typedef enum
60     {
61         FRAMEFLAGS_KEY    = 1,
62         FRAMEFLAGS_GOLDEN = 2,
63         FRAMEFLAGS_ALTREF = 4
64     } FRAMETYPE_FLAGS;
65 
66 
67 #include <assert.h>
Scale2Ratio(int mode,int * hr,int * hs)68     static void Scale2Ratio(int mode, int *hr, int *hs)
69     {
70         switch (mode)
71         {
72         case    NORMAL:
73             *hr = 1;
74             *hs = 1;
75             break;
76         case    FOURFIVE:
77             *hr = 4;
78             *hs = 5;
79             break;
80         case    THREEFIVE:
81             *hr = 3;
82             *hs = 5;
83             break;
84         case    ONETWO:
85             *hr = 1;
86             *hs = 2;
87             break;
88         default:
89             *hr = 1;
90             *hs = 1;
91             assert(0);
92             break;
93         }
94     }
95 
96     typedef struct
97     {
98         /* 4 versions of bitstream defined:
99          *   0 best quality/slowest decode, 3 lowest quality/fastest decode
100          */
101         int Version;
102         int Width;
103         int Height;
104         struct vpx_rational  timebase;
105         unsigned int target_bandwidth;    /* kilobits per second */
106 
107         /* parameter used for applying pre processing blur: recommendation 0 */
108         int noise_sensitivity;
109 
110         /* parameter used for sharpening output: recommendation 0: */
111         int Sharpness;
112         int cpu_used;
113         unsigned int rc_max_intra_bitrate_pct;
114 
115         /* mode ->
116          *(0)=Realtime/Live Encoding. This mode is optimized for realtim
117          *    encoding (for example, capturing a television signal or feed
118          *    from a live camera). ( speed setting controls how fast )
119          *(1)=Good Quality Fast Encoding. The encoder balances quality with
120          *    the amount of time it takes to encode the output. ( speed
121          *    setting controls how fast )
122          *(2)=One Pass - Best Quality. The encoder places priority on the
123          *    quality of the output over encoding speed. The output is
124          *    compressed at the highest possible quality. This option takes
125          *    the longest amount of time to encode. ( speed setting ignored
126          *    )
127          *(3)=Two Pass - First Pass. The encoder generates a file of
128          *    statistics for use in the second encoding pass. ( speed
129          *    setting controls how fast )
130          *(4)=Two Pass - Second Pass. The encoder uses the statistics that
131          *    were generated in the first encoding pass to create the
132          *    compressed output. ( speed setting controls how fast )
133          *(5)=Two Pass - Second Pass Best.  The encoder uses the statistics
134          *    that were generated in the first encoding pass to create the
135          *    compressed output using the highest possible quality, and
136          *    taking a longer amount of time to encode.. ( speed setting
137          *    ignored )
138          */
139         int Mode;
140 
141         /* Key Framing Operations */
142         int auto_key;       /* automatically detect cut scenes */
143         int key_freq;       /* maximum distance to key frame. */
144 
145         /* lagged compression (if allow_lag == 0 lag_in_frames is ignored) */
146         int allow_lag;
147         int lag_in_frames; /* how many frames lag before we start encoding */
148 
149         /*
150          * DATARATE CONTROL OPTIONS
151          */
152 
153         int end_usage; /* vbr or cbr */
154 
155         /* buffer targeting aggressiveness */
156         int under_shoot_pct;
157         int over_shoot_pct;
158 
159         /* buffering parameters */
160         int64_t starting_buffer_level;
161         int64_t optimal_buffer_level;
162         int64_t maximum_buffer_size;
163 
164         int64_t starting_buffer_level_in_ms;
165         int64_t optimal_buffer_level_in_ms;
166         int64_t maximum_buffer_size_in_ms;
167 
168         /* controlling quality */
169         int fixed_q;
170         int worst_allowed_q;
171         int best_allowed_q;
172         int cq_level;
173 
174         /* allow internal resizing */
175         int allow_spatial_resampling;
176         int resample_down_water_mark;
177         int resample_up_water_mark;
178 
179         /* allow internal frame rate alterations */
180         int allow_df;
181         int drop_frames_water_mark;
182 
183         /* two pass datarate control */
184         int two_pass_vbrbias;
185         int two_pass_vbrmin_section;
186         int two_pass_vbrmax_section;
187 
188         /*
189          * END DATARATE CONTROL OPTIONS
190          */
191 
192         /* these parameters aren't to be used in final build don't use!!! */
193         int play_alternate;
194         int alt_freq;
195         int alt_q;
196         int key_q;
197         int gold_q;
198 
199 
200         int multi_threaded;   /* how many threads to run the encoder on */
201         int token_partitions; /* how many token partitions to create */
202 
203         /* early breakout threshold: for video conf recommend 800 */
204         int encode_breakout;
205 
206         /* Bitfield defining the error resiliency features to enable.
207          * Can provide decodable frames after losses in previous
208          * frames and decodable partitions after losses in the same frame.
209          */
210         unsigned int error_resilient_mode;
211 
212         int arnr_max_frames;
213         int arnr_strength;
214         int arnr_type;
215 
216         struct vpx_fixed_buf        two_pass_stats_in;
217         struct vpx_codec_pkt_list  *output_pkt_list;
218 
219         vp8e_tuning tuning;
220 
221         /* Temporal scaling parameters */
222         unsigned int number_of_layers;
223         unsigned int target_bitrate[VPX_TS_MAX_PERIODICITY];
224         unsigned int rate_decimator[VPX_TS_MAX_PERIODICITY];
225         unsigned int periodicity;
226         unsigned int layer_id[VPX_TS_MAX_PERIODICITY];
227 
228 #if CONFIG_MULTI_RES_ENCODING
229         /* Number of total resolutions encoded */
230         unsigned int mr_total_resolutions;
231 
232         /* Current encoder ID */
233         unsigned int mr_encoder_id;
234 
235         /* Down-sampling factor */
236         vpx_rational_t mr_down_sampling_factor;
237 
238         /* Memory location to store low-resolution encoder's mode info */
239         void* mr_low_res_mode_info;
240 #endif
241     } VP8_CONFIG;
242 
243 
244     void vp8_initialize();
245 
246     struct VP8_COMP* vp8_create_compressor(VP8_CONFIG *oxcf);
247     void vp8_remove_compressor(struct VP8_COMP* *comp);
248 
249     void vp8_init_config(struct VP8_COMP* onyx, VP8_CONFIG *oxcf);
250     void vp8_change_config(struct VP8_COMP* onyx, VP8_CONFIG *oxcf);
251 
252     int vp8_receive_raw_frame(struct VP8_COMP* comp, unsigned int frame_flags, YV12_BUFFER_CONFIG *sd, int64_t time_stamp, int64_t end_time_stamp);
253     int vp8_get_compressed_data(struct VP8_COMP* comp, unsigned int *frame_flags, unsigned long *size, unsigned char *dest, unsigned char *dest_end, int64_t *time_stamp, int64_t *time_end, int flush);
254     int vp8_get_preview_raw_frame(struct VP8_COMP* comp, YV12_BUFFER_CONFIG *dest, vp8_ppflags_t *flags);
255 
256     int vp8_use_as_reference(struct VP8_COMP* comp, int ref_frame_flags);
257     int vp8_update_reference(struct VP8_COMP* comp, int ref_frame_flags);
258     int vp8_get_reference(struct VP8_COMP* comp, enum vpx_ref_frame_type ref_frame_flag, YV12_BUFFER_CONFIG *sd);
259     int vp8_set_reference(struct VP8_COMP* comp, enum vpx_ref_frame_type ref_frame_flag, YV12_BUFFER_CONFIG *sd);
260     int vp8_update_entropy(struct VP8_COMP* comp, int update);
261     int vp8_set_roimap(struct VP8_COMP* comp, unsigned char *map, unsigned int rows, unsigned int cols, int delta_q[4], int delta_lf[4], unsigned int threshold[4]);
262     int vp8_set_active_map(struct VP8_COMP* comp, unsigned char *map, unsigned int rows, unsigned int cols);
263     int vp8_set_internal_size(struct VP8_COMP* comp, VPX_SCALING horiz_mode, VPX_SCALING vert_mode);
264     int vp8_get_quantizer(struct VP8_COMP* c);
265 
266 #ifdef __cplusplus
267 }
268 #endif
269 
270 #endif  // VP8_COMMON_ONYX_H_
271