1 /* 2 * The copyright in this software is being made available under the 2-clauses 3 * BSD License, included below. This software may be subject to other third 4 * party and contributor rights, including patent rights, and no such rights 5 * are granted under this license. 6 * 7 * Copyright (c) 2002-2014, Universite catholique de Louvain (UCL), Belgium 8 * Copyright (c) 2002-2014, Professor Benoit Macq 9 * Copyright (c) 2001-2003, David Janssens 10 * Copyright (c) 2002-2003, Yannick Verschueren 11 * Copyright (c) 2003-2007, Francois-Olivier Devaux 12 * Copyright (c) 2003-2014, Antonin Descampe 13 * Copyright (c) 2005, Herve Drolon, FreeImage Team 14 * Copyright (c) 2006-2007, Parvatha Elangovan 15 * Copyright (c) 2008, Jerome Fimes, Communications & Systemes <jerome.fimes@c-s.fr> 16 * Copyright (c) 2010-2011, Kaori Hagihara 17 * Copyright (c) 2011-2012, Centre National d'Etudes Spatiales (CNES), France 18 * Copyright (c) 2012, CS Systemes d'Information, France 19 * All rights reserved. 20 * 21 * Redistribution and use in source and binary forms, with or without 22 * modification, are permitted provided that the following conditions 23 * are met: 24 * 1. Redistributions of source code must retain the above copyright 25 * notice, this list of conditions and the following disclaimer. 26 * 2. Redistributions in binary form must reproduce the above copyright 27 * notice, this list of conditions and the following disclaimer in the 28 * documentation and/or other materials provided with the distribution. 29 * 30 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS `AS IS' 31 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 32 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 33 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 34 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 35 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 36 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 37 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 38 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 39 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 40 * POSSIBILITY OF SUCH DAMAGE. 41 */ 42 #ifndef OPENJPEG_H 43 #define OPENJPEG_H 44 45 46 /* 47 ========================================================== 48 Compiler directives 49 ========================================================== 50 */ 51 52 /* 53 The inline keyword is supported by C99 but not by C90. 54 Most compilers implement their own version of this keyword ... 55 */ 56 #ifndef INLINE 57 #if defined(_MSC_VER) 58 #define INLINE __forceinline 59 #elif defined(__GNUC__) 60 #define INLINE __inline__ 61 #elif defined(__MWERKS__) 62 #define INLINE inline 63 #else 64 /* add other compilers here ... */ 65 #define INLINE 66 #endif /* defined(<Compiler>) */ 67 #endif /* INLINE */ 68 69 /* deprecated attribute */ 70 #ifdef __GNUC__ 71 #define OPJ_DEPRECATED(func) func __attribute__ ((deprecated)) 72 #elif defined(_MSC_VER) 73 #define OPJ_DEPRECATED(func) __declspec(deprecated) func 74 #else 75 #pragma message("WARNING: You need to implement DEPRECATED for this compiler") 76 #define OPJ_DEPRECATED(func) func 77 #endif 78 79 #if defined(OPJ_STATIC) || !defined(_WIN32) 80 /* http://gcc.gnu.org/wiki/Visibility */ 81 # if __GNUC__ >= 4 82 # if defined(OPJ_STATIC) /* static library uses "hidden" */ 83 # define OPJ_API __attribute__ ((visibility ("hidden"))) 84 # else 85 # define OPJ_API __attribute__ ((visibility ("default"))) 86 # endif 87 # define OPJ_LOCAL __attribute__ ((visibility ("hidden"))) 88 # else 89 # define OPJ_API 90 # define OPJ_LOCAL 91 # endif 92 # define OPJ_CALLCONV 93 #else 94 # define OPJ_CALLCONV __stdcall 95 /* 96 The following ifdef block is the standard way of creating macros which make exporting 97 from a DLL simpler. All files within this DLL are compiled with the OPJ_EXPORTS 98 symbol defined on the command line. this symbol should not be defined on any project 99 that uses this DLL. This way any other project whose source files include this file see 100 OPJ_API functions as being imported from a DLL, whereas this DLL sees symbols 101 defined with this macro as being exported. 102 */ 103 # if defined(OPJ_EXPORTS) || defined(DLL_EXPORT) 104 # define OPJ_API __declspec(dllexport) 105 # else 106 # define OPJ_API __declspec(dllimport) 107 # endif /* OPJ_EXPORTS */ 108 #endif /* !OPJ_STATIC || !_WIN32 */ 109 110 typedef int OPJ_BOOL; 111 #define OPJ_TRUE 1 112 #define OPJ_FALSE 0 113 114 typedef char OPJ_CHAR; 115 typedef float OPJ_FLOAT32; 116 typedef double OPJ_FLOAT64; 117 typedef unsigned char OPJ_BYTE; 118 119 #include "opj_stdint.h" 120 121 typedef int8_t OPJ_INT8; 122 typedef uint8_t OPJ_UINT8; 123 typedef int16_t OPJ_INT16; 124 typedef uint16_t OPJ_UINT16; 125 typedef int32_t OPJ_INT32; 126 typedef uint32_t OPJ_UINT32; 127 typedef int64_t OPJ_INT64; 128 typedef uint64_t OPJ_UINT64; 129 130 typedef int64_t OPJ_OFF_T; /* 64-bit file offset type */ 131 132 #include <stdio.h> 133 typedef size_t OPJ_SIZE_T; 134 135 /* Avoid compile-time warning because parameter is not used */ 136 #define OPJ_ARG_NOT_USED(x) (void)(x) 137 138 /* 139 ========================================================== 140 Useful constant definitions 141 ========================================================== 142 */ 143 144 #define OPJ_PATH_LEN 4096 /**< Maximum allowed size for filenames */ 145 146 #define OPJ_J2K_MAXRLVLS 33 /**< Number of maximum resolution level authorized */ 147 #define OPJ_J2K_MAXBANDS (3*OPJ_J2K_MAXRLVLS-2) /**< Number of maximum sub-band linked to number of resolution level */ 148 149 #define OPJ_J2K_DEFAULT_NB_SEGS 10 150 #define OPJ_J2K_STREAM_CHUNK_SIZE 0x100000 /** 1 mega by default */ 151 #define OPJ_J2K_DEFAULT_HEADER_SIZE 1000 152 #define OPJ_J2K_MCC_DEFAULT_NB_RECORDS 10 153 #define OPJ_J2K_MCT_DEFAULT_NB_RECORDS 10 154 155 /* UniPG>> */ /* NOT YET USED IN THE V2 VERSION OF OPENJPEG */ 156 #define JPWL_MAX_NO_TILESPECS 16 /**< Maximum number of tile parts expected by JPWL: increase at your will */ 157 #define JPWL_MAX_NO_PACKSPECS 16 /**< Maximum number of packet parts expected by JPWL: increase at your will */ 158 #define JPWL_MAX_NO_MARKERS 512 /**< Maximum number of JPWL markers: increase at your will */ 159 #define JPWL_PRIVATEINDEX_NAME "jpwl_index_privatefilename" /**< index file name used when JPWL is on */ 160 #define JPWL_EXPECTED_COMPONENTS 3 /**< Expect this number of components, so you'll find better the first EPB */ 161 #define JPWL_MAXIMUM_TILES 8192 /**< Expect this maximum number of tiles, to avoid some crashes */ 162 #define JPWL_MAXIMUM_HAMMING 2 /**< Expect this maximum number of bit errors in marker id's */ 163 #define JPWL_MAXIMUM_EPB_ROOM 65450 /**< Expect this maximum number of bytes for composition of EPBs */ 164 /* <<UniPG */ 165 166 /** 167 * EXPERIMENTAL FOR THE MOMENT 168 * Supported options about file information used only in j2k_dump 169 */ 170 #define OPJ_IMG_INFO 1 /**< Basic image information provided to the user */ 171 #define OPJ_J2K_MH_INFO 2 /**< Codestream information based only on the main header */ 172 #define OPJ_J2K_TH_INFO 4 /**< Tile information based on the current tile header */ 173 #define OPJ_J2K_TCH_INFO 8 /**< Tile/Component information of all tiles */ 174 #define OPJ_J2K_MH_IND 16 /**< Codestream index based only on the main header */ 175 #define OPJ_J2K_TH_IND 32 /**< Tile index based on the current tile */ 176 /*FIXME #define OPJ_J2K_CSTR_IND 48*/ /**< */ 177 #define OPJ_JP2_INFO 128 /**< JP2 file information */ 178 #define OPJ_JP2_IND 256 /**< JP2 file index */ 179 180 /** 181 * JPEG 2000 Profiles, see Table A.10 from 15444-1 (updated in various AMD) 182 * These values help chosing the RSIZ value for the J2K codestream. 183 * The RSIZ value triggers various encoding options, as detailed in Table A.10. 184 * If OPJ_PROFILE_PART2 is chosen, it has to be combined with one or more extensions 185 * described hereunder. 186 * Example: rsiz = OPJ_PROFILE_PART2 | OPJ_EXTENSION_MCT; 187 * For broadcast profiles, the OPJ_PROFILE value has to be combined with the targeted 188 * mainlevel (3-0 LSB, value between 0 and 11): 189 * Example: rsiz = OPJ_PROFILE_BC_MULTI | 0x0005; (here mainlevel 5) 190 * For IMF profiles, the OPJ_PROFILE value has to be combined with the targeted mainlevel 191 * (3-0 LSB, value between 0 and 11) and sublevel (7-4 LSB, value between 0 and 9): 192 * Example: rsiz = OPJ_PROFILE_IMF_2K | 0x0040 | 0x0005; (here main 5 and sublevel 4) 193 * */ 194 #define OPJ_PROFILE_NONE 0x0000 /** no profile, conform to 15444-1 */ 195 #define OPJ_PROFILE_0 0x0001 /** Profile 0 as described in 15444-1,Table A.45 */ 196 #define OPJ_PROFILE_1 0x0002 /** Profile 1 as described in 15444-1,Table A.45 */ 197 #define OPJ_PROFILE_PART2 0x8000 /** At least 1 extension defined in 15444-2 (Part-2) */ 198 #define OPJ_PROFILE_CINEMA_2K 0x0003 /** 2K cinema profile defined in 15444-1 AMD1 */ 199 #define OPJ_PROFILE_CINEMA_4K 0x0004 /** 4K cinema profile defined in 15444-1 AMD1 */ 200 #define OPJ_PROFILE_CINEMA_S2K 0x0005 /** Scalable 2K cinema profile defined in 15444-1 AMD2 */ 201 #define OPJ_PROFILE_CINEMA_S4K 0x0006 /** Scalable 4K cinema profile defined in 15444-1 AMD2 */ 202 #define OPJ_PROFILE_CINEMA_LTS 0x0007 /** Long term storage cinema profile defined in 15444-1 AMD2 */ 203 #define OPJ_PROFILE_BC_SINGLE 0x0100 /** Single Tile Broadcast profile defined in 15444-1 AMD3 */ 204 #define OPJ_PROFILE_BC_MULTI 0x0200 /** Multi Tile Broadcast profile defined in 15444-1 AMD3 */ 205 #define OPJ_PROFILE_BC_MULTI_R 0x0300 /** Multi Tile Reversible Broadcast profile defined in 15444-1 AMD3 */ 206 #define OPJ_PROFILE_IMF_2K 0x0400 /** 2K Single Tile Lossy IMF profile defined in 15444-1 AMD 8 */ 207 #define OPJ_PROFILE_IMF_4K 0x0401 /** 4K Single Tile Lossy IMF profile defined in 15444-1 AMD 8 */ 208 #define OPJ_PROFILE_IMF_8K 0x0402 /** 8K Single Tile Lossy IMF profile defined in 15444-1 AMD 8 */ 209 #define OPJ_PROFILE_IMF_2K_R 0x0403 /** 2K Single/Multi Tile Reversible IMF profile defined in 15444-1 AMD 8 */ 210 #define OPJ_PROFILE_IMF_4K_R 0x0800 /** 4K Single/Multi Tile Reversible IMF profile defined in 15444-1 AMD 8 */ 211 #define OPJ_PROFILE_IMF_8K_R 0x0801 /** 8K Single/Multi Tile Reversible IMF profile defined in 15444-1 AMD 8 */ 212 213 /** 214 * JPEG 2000 Part-2 extensions 215 * */ 216 #define OPJ_EXTENSION_NONE 0x0000 /** No Part-2 extension */ 217 #define OPJ_EXTENSION_MCT 0x0100 /** Custom MCT support */ 218 219 /** 220 * JPEG 2000 profile macros 221 * */ 222 #define OPJ_IS_CINEMA(v) (((v) >= OPJ_PROFILE_CINEMA_2K)&&((v) <= OPJ_PROFILE_CINEMA_S4K)) 223 #define OPJ_IS_STORAGE(v) ((v) == OPJ_PROFILE_CINEMA_LTS) 224 #define OPJ_IS_BROADCAST(v) (((v) >= OPJ_PROFILE_BC_SINGLE)&&((v) <= ((OPJ_PROFILE_BC_MULTI_R) | (0x000b)))) 225 #define OPJ_IS_IMF(v) (((v) >= OPJ_PROFILE_IMF_2K)&&((v) <= ((OPJ_PROFILE_IMF_8K_R) | (0x009b)))) 226 #define OPJ_IS_PART2(v) ((v) & OPJ_PROFILE_PART2) 227 228 /** 229 * JPEG 2000 codestream and component size limits in cinema profiles 230 * */ 231 #define OPJ_CINEMA_24_CS 1302083 /** Maximum codestream length for 24fps */ 232 #define OPJ_CINEMA_48_CS 651041 /** Maximum codestream length for 48fps */ 233 #define OPJ_CINEMA_24_COMP 1041666 /** Maximum size per color component for 2K & 4K @ 24fps */ 234 #define OPJ_CINEMA_48_COMP 520833 /** Maximum size per color component for 2K @ 48fps */ 235 236 /* 237 ========================================================== 238 enum definitions 239 ========================================================== 240 */ 241 242 /** 243 * DEPRECATED: use RSIZ, OPJ_PROFILE_* and OPJ_EXTENSION_* instead 244 * Rsiz Capabilities 245 * */ 246 typedef enum RSIZ_CAPABILITIES { 247 OPJ_STD_RSIZ = 0, /** Standard JPEG2000 profile*/ 248 OPJ_CINEMA2K = 3, /** Profile name for a 2K image*/ 249 OPJ_CINEMA4K = 4, /** Profile name for a 4K image*/ 250 OPJ_MCT = 0x8100 251 } OPJ_RSIZ_CAPABILITIES; 252 253 /** 254 * DEPRECATED: use RSIZ, OPJ_PROFILE_* and OPJ_EXTENSION_* instead 255 * Digital cinema operation mode 256 * */ 257 typedef enum CINEMA_MODE { 258 OPJ_OFF = 0, /** Not Digital Cinema*/ 259 OPJ_CINEMA2K_24 = 1, /** 2K Digital Cinema at 24 fps*/ 260 OPJ_CINEMA2K_48 = 2, /** 2K Digital Cinema at 48 fps*/ 261 OPJ_CINEMA4K_24 = 3 /** 4K Digital Cinema at 24 fps*/ 262 }OPJ_CINEMA_MODE; 263 264 /** 265 * Progression order 266 * */ 267 typedef enum PROG_ORDER { 268 OPJ_PROG_UNKNOWN = -1, /**< place-holder */ 269 OPJ_LRCP = 0, /**< layer-resolution-component-precinct order */ 270 OPJ_RLCP = 1, /**< resolution-layer-component-precinct order */ 271 OPJ_RPCL = 2, /**< resolution-precinct-component-layer order */ 272 OPJ_PCRL = 3, /**< precinct-component-resolution-layer order */ 273 OPJ_CPRL = 4 /**< component-precinct-resolution-layer order */ 274 } OPJ_PROG_ORDER; 275 276 /** 277 * Supported image color spaces 278 */ 279 typedef enum COLOR_SPACE { 280 OPJ_CLRSPC_UNKNOWN = -1, /**< not supported by the library */ 281 OPJ_CLRSPC_UNSPECIFIED = 0, /**< not specified in the codestream */ 282 OPJ_CLRSPC_SRGB = 1, /**< sRGB */ 283 OPJ_CLRSPC_GRAY = 2, /**< grayscale */ 284 OPJ_CLRSPC_SYCC = 3, /**< YUV */ 285 OPJ_CLRSPC_EYCC = 4, /**< e-YCC */ 286 OPJ_CLRSPC_CMYK = 5 /**< CMYK */ 287 } OPJ_COLOR_SPACE; 288 289 /** 290 * Supported codec 291 */ 292 typedef enum CODEC_FORMAT { 293 OPJ_CODEC_UNKNOWN = -1, /**< place-holder */ 294 OPJ_CODEC_J2K = 0, /**< JPEG-2000 codestream : read/write */ 295 OPJ_CODEC_JPT = 1, /**< JPT-stream (JPEG 2000, JPIP) : read only */ 296 OPJ_CODEC_JP2 = 2, /**< JP2 file format : read/write */ 297 OPJ_CODEC_JPP = 3, /**< JPP-stream (JPEG 2000, JPIP) : to be coded */ 298 OPJ_CODEC_JPX = 4 /**< JPX file format (JPEG 2000 Part-2) : to be coded */ 299 } OPJ_CODEC_FORMAT; 300 301 302 /* 303 ========================================================== 304 event manager typedef definitions 305 ========================================================== 306 */ 307 308 /** 309 * Callback function prototype for events 310 * @param msg Event message 311 * @param client_data Client object where will be return the event message 312 * */ 313 typedef void (*opj_msg_callback) (const char *msg, void *client_data); 314 315 /* 316 ========================================================== 317 codec typedef definitions 318 ========================================================== 319 */ 320 321 /** 322 * Progression order changes 323 * 324 */ 325 typedef struct opj_poc { 326 /** Resolution num start, Component num start, given by POC */ 327 OPJ_UINT32 resno0, compno0; 328 /** Layer num end,Resolution num end, Component num end, given by POC */ 329 OPJ_UINT32 layno1, resno1, compno1; 330 /** Layer num start,Precinct num start, Precinct num end */ 331 OPJ_UINT32 layno0, precno0, precno1; 332 /** Progression order enum*/ 333 OPJ_PROG_ORDER prg1,prg; 334 /** Progression order string*/ 335 OPJ_CHAR progorder[5]; 336 /** Tile number */ 337 OPJ_UINT32 tile; 338 /** Start and end values for Tile width and height*/ 339 OPJ_INT32 tx0,tx1,ty0,ty1; 340 /** Start value, initialised in pi_initialise_encode*/ 341 OPJ_UINT32 layS, resS, compS, prcS; 342 /** End value, initialised in pi_initialise_encode */ 343 OPJ_UINT32 layE, resE, compE, prcE; 344 /** Start and end values of Tile width and height, initialised in pi_initialise_encode*/ 345 OPJ_UINT32 txS,txE,tyS,tyE,dx,dy; 346 /** Temporary values for Tile parts, initialised in pi_create_encode */ 347 OPJ_UINT32 lay_t, res_t, comp_t, prc_t,tx0_t,ty0_t; 348 } opj_poc_t; 349 350 /** 351 * Compression parameters 352 * */ 353 typedef struct opj_cparameters { 354 /** size of tile: tile_size_on = false (not in argument) or = true (in argument) */ 355 OPJ_BOOL tile_size_on; 356 /** XTOsiz */ 357 int cp_tx0; 358 /** YTOsiz */ 359 int cp_ty0; 360 /** XTsiz */ 361 int cp_tdx; 362 /** YTsiz */ 363 int cp_tdy; 364 /** allocation by rate/distortion */ 365 int cp_disto_alloc; 366 /** allocation by fixed layer */ 367 int cp_fixed_alloc; 368 /** add fixed_quality */ 369 int cp_fixed_quality; 370 /** fixed layer */ 371 int *cp_matrice; 372 /** comment for coding */ 373 char *cp_comment; 374 /** csty : coding style */ 375 int csty; 376 /** progression order (default OPJ_LRCP) */ 377 OPJ_PROG_ORDER prog_order; 378 /** progression order changes */ 379 opj_poc_t POC[32]; 380 /** number of progression order changes (POC), default to 0 */ 381 OPJ_UINT32 numpocs; 382 /** number of layers */ 383 int tcp_numlayers; 384 /** rates of layers - might be subsequently limited by the max_cs_size field */ 385 float tcp_rates[100]; 386 /** different psnr for successive layers */ 387 float tcp_distoratio[100]; 388 /** number of resolutions */ 389 int numresolution; 390 /** initial code block width, default to 64 */ 391 int cblockw_init; 392 /** initial code block height, default to 64 */ 393 int cblockh_init; 394 /** mode switch (cblk_style) */ 395 int mode; 396 /** 1 : use the irreversible DWT 9-7, 0 : use lossless compression (default) */ 397 int irreversible; 398 /** region of interest: affected component in [0..3], -1 means no ROI */ 399 int roi_compno; 400 /** region of interest: upshift value */ 401 int roi_shift; 402 /* number of precinct size specifications */ 403 int res_spec; 404 /** initial precinct width */ 405 int prcw_init[OPJ_J2K_MAXRLVLS]; 406 /** initial precinct height */ 407 int prch_init[OPJ_J2K_MAXRLVLS]; 408 409 /**@name command line encoder parameters (not used inside the library) */ 410 /*@{*/ 411 /** input file name */ 412 char infile[OPJ_PATH_LEN]; 413 /** output file name */ 414 char outfile[OPJ_PATH_LEN]; 415 /** DEPRECATED. Index generation is now handeld with the opj_encode_with_info() function. Set to NULL */ 416 int index_on; 417 /** DEPRECATED. Index generation is now handeld with the opj_encode_with_info() function. Set to NULL */ 418 char index[OPJ_PATH_LEN]; 419 /** subimage encoding: origin image offset in x direction */ 420 int image_offset_x0; 421 /** subimage encoding: origin image offset in y direction */ 422 int image_offset_y0; 423 /** subsampling value for dx */ 424 int subsampling_dx; 425 /** subsampling value for dy */ 426 int subsampling_dy; 427 /** input file format 0: PGX, 1: PxM, 2: BMP 3:TIF*/ 428 int decod_format; 429 /** output file format 0: J2K, 1: JP2, 2: JPT */ 430 int cod_format; 431 /*@}*/ 432 433 /* UniPG>> */ /* NOT YET USED IN THE V2 VERSION OF OPENJPEG */ 434 /**@name JPWL encoding parameters */ 435 /*@{*/ 436 /** enables writing of EPC in MH, thus activating JPWL */ 437 OPJ_BOOL jpwl_epc_on; 438 /** error protection method for MH (0,1,16,32,37-128) */ 439 int jpwl_hprot_MH; 440 /** tile number of header protection specification (>=0) */ 441 int jpwl_hprot_TPH_tileno[JPWL_MAX_NO_TILESPECS]; 442 /** error protection methods for TPHs (0,1,16,32,37-128) */ 443 int jpwl_hprot_TPH[JPWL_MAX_NO_TILESPECS]; 444 /** tile number of packet protection specification (>=0) */ 445 int jpwl_pprot_tileno[JPWL_MAX_NO_PACKSPECS]; 446 /** packet number of packet protection specification (>=0) */ 447 int jpwl_pprot_packno[JPWL_MAX_NO_PACKSPECS]; 448 /** error protection methods for packets (0,1,16,32,37-128) */ 449 int jpwl_pprot[JPWL_MAX_NO_PACKSPECS]; 450 /** enables writing of ESD, (0=no/1/2 bytes) */ 451 int jpwl_sens_size; 452 /** sensitivity addressing size (0=auto/2/4 bytes) */ 453 int jpwl_sens_addr; 454 /** sensitivity range (0-3) */ 455 int jpwl_sens_range; 456 /** sensitivity method for MH (-1=no,0-7) */ 457 int jpwl_sens_MH; 458 /** tile number of sensitivity specification (>=0) */ 459 int jpwl_sens_TPH_tileno[JPWL_MAX_NO_TILESPECS]; 460 /** sensitivity methods for TPHs (-1=no,0-7) */ 461 int jpwl_sens_TPH[JPWL_MAX_NO_TILESPECS]; 462 /*@}*/ 463 /* <<UniPG */ 464 465 /** 466 * DEPRECATED: use RSIZ, OPJ_PROFILE_* and MAX_COMP_SIZE instead 467 * Digital Cinema compliance 0-not compliant, 1-compliant 468 * */ 469 OPJ_CINEMA_MODE cp_cinema; 470 /** 471 * Maximum size (in bytes) for each component. 472 * If == 0, component size limitation is not considered 473 * */ 474 int max_comp_size; 475 /** 476 * DEPRECATED: use RSIZ, OPJ_PROFILE_* and OPJ_EXTENSION_* instead 477 * Profile name 478 * */ 479 OPJ_RSIZ_CAPABILITIES cp_rsiz; 480 /** Tile part generation*/ 481 char tp_on; 482 /** Flag for Tile part generation*/ 483 char tp_flag; 484 /** MCT (multiple component transform) */ 485 char tcp_mct; 486 /** Enable JPIP indexing*/ 487 OPJ_BOOL jpip_on; 488 /** Naive implementation of MCT restricted to a single reversible array based 489 encoding without offset concerning all the components. */ 490 void * mct_data; 491 /** 492 * Maximum size (in bytes) for the whole codestream. 493 * If == 0, codestream size limitation is not considered 494 * If it does not comply with tcp_rates, max_cs_size prevails 495 * and a warning is issued. 496 * */ 497 int max_cs_size; 498 /** RSIZ value 499 To be used to combine OPJ_PROFILE_*, OPJ_EXTENSION_* and (sub)levels values. */ 500 OPJ_UINT16 rsiz; 501 } opj_cparameters_t; 502 503 #define OPJ_DPARAMETERS_IGNORE_PCLR_CMAP_CDEF_FLAG 0x0001 504 505 /** 506 * Decompression parameters 507 * */ 508 typedef struct opj_dparameters { 509 /** 510 Set the number of highest resolution levels to be discarded. 511 The image resolution is effectively divided by 2 to the power of the number of discarded levels. 512 The reduce factor is limited by the smallest total number of decomposition levels among tiles. 513 if != 0, then original dimension divided by 2^(reduce); 514 if == 0 or not used, image is decoded to the full resolution 515 */ 516 OPJ_UINT32 cp_reduce; 517 /** 518 Set the maximum number of quality layers to decode. 519 If there are less quality layers than the specified number, all the quality layers are decoded. 520 if != 0, then only the first "layer" layers are decoded; 521 if == 0 or not used, all the quality layers are decoded 522 */ 523 OPJ_UINT32 cp_layer; 524 525 /**@name command line decoder parameters (not used inside the library) */ 526 /*@{*/ 527 /** input file name */ 528 char infile[OPJ_PATH_LEN]; 529 /** output file name */ 530 char outfile[OPJ_PATH_LEN]; 531 /** input file format 0: J2K, 1: JP2, 2: JPT */ 532 int decod_format; 533 /** output file format 0: PGX, 1: PxM, 2: BMP */ 534 int cod_format; 535 536 /** Decoding area left boundary */ 537 OPJ_UINT32 DA_x0; 538 /** Decoding area right boundary */ 539 OPJ_UINT32 DA_x1; 540 /** Decoding area up boundary */ 541 OPJ_UINT32 DA_y0; 542 /** Decoding area bottom boundary */ 543 OPJ_UINT32 DA_y1; 544 /** Verbose mode */ 545 OPJ_BOOL m_verbose; 546 547 /** tile number ot the decoded tile*/ 548 OPJ_UINT32 tile_index; 549 /** Nb of tile to decode */ 550 OPJ_UINT32 nb_tile_to_decode; 551 552 /*@}*/ 553 554 /* UniPG>> */ /* NOT YET USED IN THE V2 VERSION OF OPENJPEG */ 555 /**@name JPWL decoding parameters */ 556 /*@{*/ 557 /** activates the JPWL correction capabilities */ 558 OPJ_BOOL jpwl_correct; 559 /** expected number of components */ 560 int jpwl_exp_comps; 561 /** maximum number of tiles */ 562 int jpwl_max_tiles; 563 /*@}*/ 564 /* <<UniPG */ 565 566 unsigned int flags; 567 568 } opj_dparameters_t; 569 570 571 /** 572 * JPEG2000 codec V2. 573 * */ 574 typedef void * opj_codec_t; 575 576 /* 577 ========================================================== 578 I/O stream typedef definitions 579 ========================================================== 580 */ 581 582 /** 583 * Stream open flags. 584 * */ 585 /** The stream was opened for reading. */ 586 #define OPJ_STREAM_READ OPJ_TRUE 587 /** The stream was opened for writing. */ 588 #define OPJ_STREAM_WRITE OPJ_FALSE 589 590 /* 591 * Callback function prototype for read function 592 */ 593 typedef OPJ_SIZE_T (* opj_stream_read_fn) (void * p_buffer, OPJ_SIZE_T p_nb_bytes, void * p_user_data) ; 594 595 /* 596 * Callback function prototype for write function 597 */ 598 typedef OPJ_SIZE_T (* opj_stream_write_fn) (void * p_buffer, OPJ_SIZE_T p_nb_bytes, void * p_user_data) ; 599 600 /* 601 * Callback function prototype for skip function 602 */ 603 typedef OPJ_OFF_T (* opj_stream_skip_fn) (OPJ_OFF_T p_nb_bytes, void * p_user_data) ; 604 605 /* 606 * Callback function prototype for seek function 607 */ 608 typedef OPJ_BOOL (* opj_stream_seek_fn) (OPJ_OFF_T p_nb_bytes, void * p_user_data) ; 609 610 /* 611 * Callback function prototype for free user data function 612 */ 613 typedef void (* opj_stream_free_user_data_fn) (void * p_user_data) ; 614 615 /* 616 * JPEG2000 Stream. 617 */ 618 typedef void * opj_stream_t; 619 620 /* 621 ========================================================== 622 image typedef definitions 623 ========================================================== 624 */ 625 626 /** 627 * Defines a single image component 628 * */ 629 typedef struct opj_image_comp { 630 /** XRsiz: horizontal separation of a sample of ith component with respect to the reference grid */ 631 OPJ_UINT32 dx; 632 /** YRsiz: vertical separation of a sample of ith component with respect to the reference grid */ 633 OPJ_UINT32 dy; 634 /** data width */ 635 OPJ_UINT32 w; 636 /** data height */ 637 OPJ_UINT32 h; 638 /** x component offset compared to the whole image */ 639 OPJ_UINT32 x0; 640 /** y component offset compared to the whole image */ 641 OPJ_UINT32 y0; 642 /** precision */ 643 OPJ_UINT32 prec; 644 /** image depth in bits */ 645 OPJ_UINT32 bpp; 646 /** signed (1) / unsigned (0) */ 647 OPJ_UINT32 sgnd; 648 /** number of decoded resolution */ 649 OPJ_UINT32 resno_decoded; 650 /** number of division by 2 of the out image compared to the original size of image */ 651 OPJ_UINT32 factor; 652 /** image component data */ 653 OPJ_INT32 *data; 654 /** alpha channel */ 655 OPJ_UINT16 alpha; 656 } opj_image_comp_t; 657 658 /** 659 * Defines image data and characteristics 660 * */ 661 typedef struct opj_image { 662 /** XOsiz: horizontal offset from the origin of the reference grid to the left side of the image area */ 663 OPJ_UINT32 x0; 664 /** YOsiz: vertical offset from the origin of the reference grid to the top side of the image area */ 665 OPJ_UINT32 y0; 666 /** Xsiz: width of the reference grid */ 667 OPJ_UINT32 x1; 668 /** Ysiz: height of the reference grid */ 669 OPJ_UINT32 y1; 670 /** number of components in the image */ 671 OPJ_UINT32 numcomps; 672 /** color space: sRGB, Greyscale or YUV */ 673 OPJ_COLOR_SPACE color_space; 674 /** image components */ 675 opj_image_comp_t *comps; 676 /** 'restricted' ICC profile */ 677 OPJ_BYTE *icc_profile_buf; 678 /** size of ICC profile */ 679 OPJ_UINT32 icc_profile_len; 680 681 /** Whether to apply PCLR or not */ 682 OPJ_BOOL pdfium_use_colorspace; 683 } opj_image_t; 684 685 686 /** 687 * Component parameters structure used by the opj_image_create function 688 * */ 689 typedef struct opj_image_comptparm { 690 /** XRsiz: horizontal separation of a sample of ith component with respect to the reference grid */ 691 OPJ_UINT32 dx; 692 /** YRsiz: vertical separation of a sample of ith component with respect to the reference grid */ 693 OPJ_UINT32 dy; 694 /** data width */ 695 OPJ_UINT32 w; 696 /** data height */ 697 OPJ_UINT32 h; 698 /** x component offset compared to the whole image */ 699 OPJ_UINT32 x0; 700 /** y component offset compared to the whole image */ 701 OPJ_UINT32 y0; 702 /** precision */ 703 OPJ_UINT32 prec; 704 /** image depth in bits */ 705 OPJ_UINT32 bpp; 706 /** signed (1) / unsigned (0) */ 707 OPJ_UINT32 sgnd; 708 } opj_image_cmptparm_t; 709 710 711 /* 712 ========================================================== 713 Information on the JPEG 2000 codestream 714 ========================================================== 715 */ 716 /* QUITE EXPERIMENTAL FOR THE MOMENT */ 717 718 /** 719 * Index structure : Information concerning a packet inside tile 720 * */ 721 typedef struct opj_packet_info { 722 /** packet start position (including SOP marker if it exists) */ 723 OPJ_OFF_T start_pos; 724 /** end of packet header position (including EPH marker if it exists)*/ 725 OPJ_OFF_T end_ph_pos; 726 /** packet end position */ 727 OPJ_OFF_T end_pos; 728 /** packet distorsion */ 729 double disto; 730 } opj_packet_info_t; 731 732 733 /* UniPG>> */ 734 /** 735 * Marker structure 736 * */ 737 typedef struct opj_marker_info { 738 /** marker type */ 739 unsigned short int type; 740 /** position in codestream */ 741 OPJ_OFF_T pos; 742 /** length, marker val included */ 743 int len; 744 } opj_marker_info_t; 745 /* <<UniPG */ 746 747 /** 748 * Index structure : Information concerning tile-parts 749 */ 750 typedef struct opj_tp_info { 751 /** start position of tile part */ 752 int tp_start_pos; 753 /** end position of tile part header */ 754 int tp_end_header; 755 /** end position of tile part */ 756 int tp_end_pos; 757 /** start packet of tile part */ 758 int tp_start_pack; 759 /** number of packets of tile part */ 760 int tp_numpacks; 761 } opj_tp_info_t; 762 763 /** 764 * Index structure : information regarding tiles 765 */ 766 typedef struct opj_tile_info { 767 /** value of thresh for each layer by tile cfr. Marcela */ 768 double *thresh; 769 /** number of tile */ 770 int tileno; 771 /** start position */ 772 int start_pos; 773 /** end position of the header */ 774 int end_header; 775 /** end position */ 776 int end_pos; 777 /** precinct number for each resolution level (width) */ 778 int pw[33]; 779 /** precinct number for each resolution level (height) */ 780 int ph[33]; 781 /** precinct size (in power of 2), in X for each resolution level */ 782 int pdx[33]; 783 /** precinct size (in power of 2), in Y for each resolution level */ 784 int pdy[33]; 785 /** information concerning packets inside tile */ 786 opj_packet_info_t *packet; 787 /** add fixed_quality */ 788 int numpix; 789 /** add fixed_quality */ 790 double distotile; 791 /** number of markers */ 792 int marknum; 793 /** list of markers */ 794 opj_marker_info_t *marker; 795 /** actual size of markers array */ 796 int maxmarknum; 797 /** number of tile parts */ 798 int num_tps; 799 /** information concerning tile parts */ 800 opj_tp_info_t *tp; 801 } opj_tile_info_t; 802 803 /** 804 * Index structure of the codestream 805 */ 806 typedef struct opj_codestream_info { 807 /** maximum distortion reduction on the whole image (add for Marcela) */ 808 double D_max; 809 /** packet number */ 810 int packno; 811 /** writing the packet in the index with t2_encode_packets */ 812 int index_write; 813 /** image width */ 814 int image_w; 815 /** image height */ 816 int image_h; 817 /** progression order */ 818 OPJ_PROG_ORDER prog; 819 /** tile size in x */ 820 int tile_x; 821 /** tile size in y */ 822 int tile_y; 823 /** */ 824 int tile_Ox; 825 /** */ 826 int tile_Oy; 827 /** number of tiles in X */ 828 int tw; 829 /** number of tiles in Y */ 830 int th; 831 /** component numbers */ 832 int numcomps; 833 /** number of layer */ 834 int numlayers; 835 /** number of decomposition for each component */ 836 int *numdecompos; 837 /* UniPG>> */ 838 /** number of markers */ 839 int marknum; 840 /** list of markers */ 841 opj_marker_info_t *marker; 842 /** actual size of markers array */ 843 int maxmarknum; 844 /* <<UniPG */ 845 /** main header position */ 846 int main_head_start; 847 /** main header position */ 848 int main_head_end; 849 /** codestream's size */ 850 int codestream_size; 851 /** information regarding tiles inside image */ 852 opj_tile_info_t *tile; 853 } opj_codestream_info_t; 854 855 /* <----------------------------------------------------------- */ 856 /* new output management of the codestream information and index */ 857 858 /** 859 * Tile-component coding parameters information 860 */ 861 typedef struct opj_tccp_info 862 { 863 /** component index */ 864 OPJ_UINT32 compno; 865 /** coding style */ 866 OPJ_UINT32 csty; 867 /** number of resolutions */ 868 OPJ_UINT32 numresolutions; 869 /** code-blocks width */ 870 OPJ_UINT32 cblkw; 871 /** code-blocks height */ 872 OPJ_UINT32 cblkh; 873 /** code-block coding style */ 874 OPJ_UINT32 cblksty; 875 /** discrete wavelet transform identifier */ 876 OPJ_UINT32 qmfbid; 877 /** quantisation style */ 878 OPJ_UINT32 qntsty; 879 /** stepsizes used for quantization */ 880 OPJ_UINT32 stepsizes_mant[OPJ_J2K_MAXBANDS]; 881 /** stepsizes used for quantization */ 882 OPJ_UINT32 stepsizes_expn[OPJ_J2K_MAXBANDS]; 883 /** number of guard bits */ 884 OPJ_UINT32 numgbits; 885 /** Region Of Interest shift */ 886 OPJ_INT32 roishift; 887 /** precinct width */ 888 OPJ_UINT32 prcw[OPJ_J2K_MAXRLVLS]; 889 /** precinct height */ 890 OPJ_UINT32 prch[OPJ_J2K_MAXRLVLS]; 891 } 892 opj_tccp_info_t; 893 894 /** 895 * Tile coding parameters information 896 */ 897 typedef struct opj_tile_v2_info { 898 899 /** number (index) of tile */ 900 int tileno; 901 /** coding style */ 902 OPJ_UINT32 csty; 903 /** progression order */ 904 OPJ_PROG_ORDER prg; 905 /** number of layers */ 906 OPJ_UINT32 numlayers; 907 /** multi-component transform identifier */ 908 OPJ_UINT32 mct; 909 910 /** information concerning tile component parameters*/ 911 opj_tccp_info_t *tccp_info; 912 913 } opj_tile_info_v2_t; 914 915 /** 916 * Information structure about the codestream (FIXME should be expand and enhance) 917 */ 918 typedef struct opj_codestream_info_v2 { 919 /* Tile info */ 920 /** tile origin in x = XTOsiz */ 921 OPJ_UINT32 tx0; 922 /** tile origin in y = YTOsiz */ 923 OPJ_UINT32 ty0; 924 /** tile size in x = XTsiz */ 925 OPJ_UINT32 tdx; 926 /** tile size in y = YTsiz */ 927 OPJ_UINT32 tdy; 928 /** number of tiles in X */ 929 OPJ_UINT32 tw; 930 /** number of tiles in Y */ 931 OPJ_UINT32 th; 932 933 /** number of components*/ 934 OPJ_UINT32 nbcomps; 935 936 /** Default information regarding tiles inside image */ 937 opj_tile_info_v2_t m_default_tile_info; 938 939 /** information regarding tiles inside image */ 940 opj_tile_info_v2_t *tile_info; /* FIXME not used for the moment */ 941 942 } opj_codestream_info_v2_t; 943 944 945 /** 946 * Index structure about a tile part 947 */ 948 typedef struct opj_tp_index { 949 /** start position */ 950 OPJ_OFF_T start_pos; 951 /** end position of the header */ 952 OPJ_OFF_T end_header; 953 /** end position */ 954 OPJ_OFF_T end_pos; 955 956 } opj_tp_index_t; 957 958 /** 959 * Index structure about a tile 960 */ 961 typedef struct opj_tile_index { 962 /** tile index */ 963 OPJ_UINT32 tileno; 964 965 /** number of tile parts */ 966 OPJ_UINT32 nb_tps; 967 /** current nb of tile part (allocated)*/ 968 OPJ_UINT32 current_nb_tps; 969 /** current tile-part index */ 970 OPJ_UINT32 current_tpsno; 971 /** information concerning tile parts */ 972 opj_tp_index_t *tp_index; 973 974 /* UniPG>> */ /* NOT USED FOR THE MOMENT IN THE V2 VERSION */ 975 /** number of markers */ 976 OPJ_UINT32 marknum; 977 /** list of markers */ 978 opj_marker_info_t *marker; 979 /** actual size of markers array */ 980 OPJ_UINT32 maxmarknum; 981 /* <<UniPG */ 982 983 /** packet number */ 984 OPJ_UINT32 nb_packet; 985 /** information concerning packets inside tile */ 986 opj_packet_info_t *packet_index; 987 988 } opj_tile_index_t; 989 990 /** 991 * Index structure of the codestream (FIXME should be expand and enhance) 992 */ 993 typedef struct opj_codestream_index { 994 /** main header start position (SOC position) */ 995 OPJ_OFF_T main_head_start; 996 /** main header end position (first SOT position) */ 997 OPJ_OFF_T main_head_end; 998 999 /** codestream's size */ 1000 OPJ_UINT64 codestream_size; 1001 1002 /* UniPG>> */ /* NOT USED FOR THE MOMENT IN THE V2 VERSION */ 1003 /** number of markers */ 1004 OPJ_UINT32 marknum; 1005 /** list of markers */ 1006 opj_marker_info_t *marker; 1007 /** actual size of markers array */ 1008 OPJ_UINT32 maxmarknum; 1009 /* <<UniPG */ 1010 1011 /** */ 1012 OPJ_UINT32 nb_of_tiles; 1013 /** */ 1014 opj_tile_index_t *tile_index; /* FIXME not used for the moment */ 1015 1016 }opj_codestream_index_t; 1017 /* -----------------------------------------------------------> */ 1018 1019 /* 1020 ========================================================== 1021 Metadata from the JP2file 1022 ========================================================== 1023 */ 1024 1025 /** 1026 * Info structure of the JP2 file 1027 * EXPERIMENTAL FOR THE MOMENT 1028 */ 1029 typedef struct opj_jp2_metadata { 1030 /** */ 1031 OPJ_INT32 not_used; 1032 1033 } opj_jp2_metadata_t; 1034 1035 /** 1036 * Index structure of the JP2 file 1037 * EXPERIMENTAL FOR THE MOMENT 1038 */ 1039 typedef struct opj_jp2_index { 1040 /** */ 1041 OPJ_INT32 not_used; 1042 1043 } opj_jp2_index_t; 1044 1045 1046 #ifdef __cplusplus 1047 extern "C" { 1048 #endif 1049 1050 1051 /* 1052 ========================================================== 1053 openjpeg version 1054 ========================================================== 1055 */ 1056 1057 /* Get the version of the openjpeg library*/ 1058 OPJ_API const char * OPJ_CALLCONV opj_version(void); 1059 1060 /* 1061 ========================================================== 1062 image functions definitions 1063 ========================================================== 1064 */ 1065 1066 /** 1067 * Create an image 1068 * 1069 * @param numcmpts number of components 1070 * @param cmptparms components parameters 1071 * @param clrspc image color space 1072 * @return returns a new image structure if successful, returns NULL otherwise 1073 * */ 1074 OPJ_API opj_image_t* OPJ_CALLCONV opj_image_create(OPJ_UINT32 numcmpts, opj_image_cmptparm_t *cmptparms, OPJ_COLOR_SPACE clrspc); 1075 1076 /** 1077 * Deallocate any resources associated with an image 1078 * 1079 * @param image image to be destroyed 1080 */ 1081 OPJ_API void OPJ_CALLCONV opj_image_destroy(opj_image_t *image); 1082 1083 /** 1084 * Creates an image without allocating memory for the image (used in the new version of the library). 1085 * 1086 * @param numcmpts the number of components 1087 * @param cmptparms the components parameters 1088 * @param clrspc the image color space 1089 * 1090 * @return a new image structure if successful, NULL otherwise. 1091 */ 1092 OPJ_API opj_image_t* OPJ_CALLCONV opj_image_tile_create(OPJ_UINT32 numcmpts, opj_image_cmptparm_t *cmptparms, OPJ_COLOR_SPACE clrspc); 1093 1094 /* 1095 ========================================================== 1096 stream functions definitions 1097 ========================================================== 1098 */ 1099 1100 /** 1101 * Creates an abstract stream. This function does nothing except allocating memory and initializing the abstract stream. 1102 * 1103 * @param p_is_input if set to true then the stream will be an input stream, an output stream else. 1104 * 1105 * @return a stream object. 1106 */ 1107 OPJ_API opj_stream_t* OPJ_CALLCONV opj_stream_default_create(OPJ_BOOL p_is_input); 1108 1109 /** 1110 * Creates an abstract stream. This function does nothing except allocating memory and initializing the abstract stream. 1111 * 1112 * @param p_buffer_size FIXME DOC 1113 * @param p_is_input if set to true then the stream will be an input stream, an output stream else. 1114 * 1115 * @return a stream object. 1116 */ 1117 OPJ_API opj_stream_t* OPJ_CALLCONV opj_stream_create(OPJ_SIZE_T p_buffer_size, OPJ_BOOL p_is_input); 1118 1119 /** 1120 * Destroys a stream created by opj_create_stream. This function does NOT close the abstract stream. If needed the user must 1121 * close its own implementation of the stream. 1122 * 1123 * @param p_stream the stream to destroy. 1124 */ 1125 OPJ_API void OPJ_CALLCONV opj_stream_destroy(opj_stream_t* p_stream); 1126 1127 /** 1128 * Sets the given function to be used as a read function. 1129 * @param p_stream the stream to modify 1130 * @param p_function the function to use a read function. 1131 */ 1132 OPJ_API void OPJ_CALLCONV opj_stream_set_read_function(opj_stream_t* p_stream, opj_stream_read_fn p_function); 1133 1134 /** 1135 * Sets the given function to be used as a write function. 1136 * @param p_stream the stream to modify 1137 * @param p_function the function to use a write function. 1138 */ 1139 OPJ_API void OPJ_CALLCONV opj_stream_set_write_function(opj_stream_t* p_stream, opj_stream_write_fn p_function); 1140 1141 /** 1142 * Sets the given function to be used as a skip function. 1143 * @param p_stream the stream to modify 1144 * @param p_function the function to use a skip function. 1145 */ 1146 OPJ_API void OPJ_CALLCONV opj_stream_set_skip_function(opj_stream_t* p_stream, opj_stream_skip_fn p_function); 1147 1148 /** 1149 * Sets the given function to be used as a seek function, the stream is then seekable. 1150 * @param p_stream the stream to modify 1151 * @param p_function the function to use a skip function. 1152 */ 1153 OPJ_API void OPJ_CALLCONV opj_stream_set_seek_function(opj_stream_t* p_stream, opj_stream_seek_fn p_function); 1154 1155 /** 1156 * Sets the given data to be used as a user data for the stream. 1157 * @param p_stream the stream to modify 1158 * @param p_data the data to set. 1159 * @param p_function the function to free p_data when opj_stream_destroy() is called. 1160 */ 1161 OPJ_API void OPJ_CALLCONV opj_stream_set_user_data (opj_stream_t* p_stream, void * p_data, opj_stream_free_user_data_fn p_function); 1162 1163 /** 1164 * Sets the length of the user data for the stream. 1165 * 1166 * @param p_stream the stream to modify 1167 * @param data_length length of the user_data. 1168 */ 1169 OPJ_API void OPJ_CALLCONV opj_stream_set_user_data_length(opj_stream_t* p_stream, OPJ_UINT64 data_length); 1170 1171 /** 1172 * Create a stream from a file identified with its filename with default parameters (helper function) 1173 * @param fname the filename of the file to stream 1174 * @param p_is_read_stream whether the stream is a read stream (true) or not (false) 1175 */ 1176 OPJ_API opj_stream_t* OPJ_CALLCONV opj_stream_create_default_file_stream (const char *fname, OPJ_BOOL p_is_read_stream); 1177 1178 /** Create a stream from a file identified with its filename with a specific buffer size 1179 * @param fname the filename of the file to stream 1180 * @param p_buffer_size size of the chunk used to stream 1181 * @param p_is_read_stream whether the stream is a read stream (true) or not (false) 1182 */ 1183 OPJ_API opj_stream_t* OPJ_CALLCONV opj_stream_create_file_stream (const char *fname, 1184 OPJ_SIZE_T p_buffer_size, 1185 OPJ_BOOL p_is_read_stream); 1186 1187 /* 1188 ========================================================== 1189 event manager functions definitions 1190 ========================================================== 1191 */ 1192 /** 1193 * Set the info handler use by openjpeg. 1194 * @param p_codec the codec previously initialise 1195 * @param p_callback the callback function which will be used 1196 * @param p_user_data client object where will be returned the message 1197 */ 1198 OPJ_API OPJ_BOOL OPJ_CALLCONV opj_set_info_handler(opj_codec_t * p_codec, 1199 opj_msg_callback p_callback, 1200 void * p_user_data); 1201 /** 1202 * Set the warning handler use by openjpeg. 1203 * @param p_codec the codec previously initialise 1204 * @param p_callback the callback function which will be used 1205 * @param p_user_data client object where will be returned the message 1206 */ 1207 OPJ_API OPJ_BOOL OPJ_CALLCONV opj_set_warning_handler(opj_codec_t * p_codec, 1208 opj_msg_callback p_callback, 1209 void * p_user_data); 1210 /** 1211 * Set the error handler use by openjpeg. 1212 * @param p_codec the codec previously initialise 1213 * @param p_callback the callback function which will be used 1214 * @param p_user_data client object where will be returned the message 1215 */ 1216 OPJ_API OPJ_BOOL OPJ_CALLCONV opj_set_error_handler(opj_codec_t * p_codec, 1217 opj_msg_callback p_callback, 1218 void * p_user_data); 1219 1220 /* 1221 ========================================================== 1222 codec functions definitions 1223 ========================================================== 1224 */ 1225 1226 /** 1227 * Creates a J2K/JP2 decompression structure 1228 * @param format Decoder to select 1229 * 1230 * @return Returns a handle to a decompressor if successful, returns NULL otherwise 1231 * */ 1232 OPJ_API opj_codec_t* OPJ_CALLCONV opj_create_decompress(OPJ_CODEC_FORMAT format); 1233 1234 /** 1235 * Destroy a decompressor handle 1236 * 1237 * @param p_codec decompressor handle to destroy 1238 */ 1239 OPJ_API void OPJ_CALLCONV opj_destroy_codec(opj_codec_t * p_codec); 1240 1241 /** 1242 * Read after the codestream if necessary 1243 * @param p_codec the JPEG2000 codec to read. 1244 * @param p_stream the JPEG2000 stream. 1245 */ 1246 OPJ_API OPJ_BOOL OPJ_CALLCONV opj_end_decompress ( opj_codec_t *p_codec, 1247 opj_stream_t *p_stream); 1248 1249 1250 /** 1251 * Set decoding parameters to default values 1252 * @param parameters Decompression parameters 1253 */ 1254 OPJ_API void OPJ_CALLCONV opj_set_default_decoder_parameters(opj_dparameters_t *parameters); 1255 1256 /** 1257 * Setup the decoder with decompression parameters provided by the user and with the message handler 1258 * provided by the user. 1259 * 1260 * @param p_codec decompressor handler 1261 * @param parameters decompression parameters 1262 * 1263 * @return true if the decoder is correctly set 1264 */ 1265 OPJ_API OPJ_BOOL OPJ_CALLCONV opj_setup_decoder(opj_codec_t *p_codec, 1266 opj_dparameters_t *parameters ); 1267 1268 /** 1269 * Decodes an image header. 1270 * 1271 * @param p_stream the jpeg2000 stream. 1272 * @param p_codec the jpeg2000 codec to read. 1273 * @param p_image the image structure initialized with the characteristics of encoded image. 1274 * 1275 * @return true if the main header of the codestream and the JP2 header is correctly read. 1276 */ 1277 OPJ_API OPJ_BOOL OPJ_CALLCONV opj_read_header ( opj_stream_t *p_stream, 1278 opj_codec_t *p_codec, 1279 opj_image_t **p_image); 1280 1281 /** 1282 * Sets the given area to be decoded. This function should be called right after opj_read_header and before any tile header reading. 1283 * 1284 * @param p_codec the jpeg2000 codec. 1285 * @param p_image the decoded image previously setted by opj_read_header 1286 * @param p_start_x the left position of the rectangle to decode (in image coordinates). 1287 * @param p_end_x the right position of the rectangle to decode (in image coordinates). 1288 * @param p_start_y the up position of the rectangle to decode (in image coordinates). 1289 * @param p_end_y the bottom position of the rectangle to decode (in image coordinates). 1290 * 1291 * @return true if the area could be set. 1292 */ 1293 OPJ_API OPJ_BOOL OPJ_CALLCONV opj_set_decode_area( opj_codec_t *p_codec, 1294 opj_image_t* p_image, 1295 OPJ_INT32 p_start_x, OPJ_INT32 p_start_y, 1296 OPJ_INT32 p_end_x, OPJ_INT32 p_end_y ); 1297 1298 /** 1299 * Decode an image from a JPEG-2000 codestream 1300 * 1301 * @param p_decompressor decompressor handle 1302 * @param p_stream Input buffer stream 1303 * @param p_image the decoded image 1304 * @return true if success, otherwise false 1305 * */ 1306 OPJ_API OPJ_BOOL OPJ_CALLCONV opj_decode( opj_codec_t *p_decompressor, 1307 opj_stream_t *p_stream, 1308 opj_image_t *p_image); 1309 1310 /** 1311 * Get the decoded tile from the codec 1312 * 1313 * @param p_codec the jpeg2000 codec. 1314 * @param p_stream input streamm 1315 * @param p_image output image 1316 * @param tile_index index of the tile which will be decode 1317 * 1318 * @return true if success, otherwise false 1319 */ 1320 OPJ_API OPJ_BOOL OPJ_CALLCONV opj_get_decoded_tile( opj_codec_t *p_codec, 1321 opj_stream_t *p_stream, 1322 opj_image_t *p_image, 1323 OPJ_UINT32 tile_index); 1324 1325 /** 1326 * Set the resolution factor of the decoded image 1327 * @param p_codec the jpeg2000 codec. 1328 * @param res_factor resolution factor to set 1329 * 1330 * @return true if success, otherwise false 1331 */ 1332 OPJ_API OPJ_BOOL OPJ_CALLCONV opj_set_decoded_resolution_factor(opj_codec_t *p_codec, OPJ_UINT32 res_factor); 1333 1334 /** 1335 * Writes a tile with the given data. 1336 * 1337 * @param p_codec the jpeg2000 codec. 1338 * @param p_tile_index the index of the tile to write. At the moment, the tiles must be written from 0 to n-1 in sequence. 1339 * @param p_data pointer to the data to write. Data is arranged in sequence, data_comp0, then data_comp1, then ... NO INTERLEAVING should be set. 1340 * @param p_data_size this value os used to make sure the data being written is correct. The size must be equal to the sum for each component of 1341 * tile_width * tile_height * component_size. component_size can be 1,2 or 4 bytes, depending on the precision of the given component. 1342 * @param p_stream the stream to write data to. 1343 * 1344 * @return true if the data could be written. 1345 */ 1346 OPJ_API OPJ_BOOL OPJ_CALLCONV opj_write_tile ( opj_codec_t *p_codec, 1347 OPJ_UINT32 p_tile_index, 1348 OPJ_BYTE * p_data, 1349 OPJ_UINT32 p_data_size, 1350 opj_stream_t *p_stream ); 1351 1352 /** 1353 * Reads a tile header. This function is compulsory and allows one to know the size of the tile that will be decoded. 1354 * The user may need to refer to the image got by opj_read_header to understand the size being taken by the tile. 1355 * 1356 * @param p_codec the jpeg2000 codec. 1357 * @param p_tile_index pointer to a value that will hold the index of the tile being decoded, in case of success. 1358 * @param p_data_size pointer to a value that will hold the maximum size of the decoded data, in case of success. In case 1359 * of truncated codestreams, the actual number of bytes decoded may be lower. The computation of the size is the same 1360 * as depicted in opj_write_tile. 1361 * @param p_tile_x0 pointer to a value that will hold the x0 pos of the tile (in the image). 1362 * @param p_tile_y0 pointer to a value that will hold the y0 pos of the tile (in the image). 1363 * @param p_tile_x1 pointer to a value that will hold the x1 pos of the tile (in the image). 1364 * @param p_tile_y1 pointer to a value that will hold the y1 pos of the tile (in the image). 1365 * @param p_nb_comps pointer to a value that will hold the number of components in the tile. 1366 * @param p_should_go_on pointer to a boolean that will hold the fact that the decoding should go on. In case the 1367 * codestream is over at the time of the call, the value will be set to false. The user should then stop 1368 * the decoding. 1369 * @param p_stream the stream to decode. 1370 * @return true if the tile header could be decoded. In case the decoding should end, the returned value is still true. 1371 * returning false may be the result of a shortage of memory or an internal error. 1372 */ 1373 OPJ_API OPJ_BOOL OPJ_CALLCONV opj_read_tile_header( opj_codec_t *p_codec, 1374 opj_stream_t * p_stream, 1375 OPJ_UINT32 * p_tile_index, 1376 OPJ_UINT32 * p_data_size, 1377 OPJ_INT32 * p_tile_x0, OPJ_INT32 * p_tile_y0, 1378 OPJ_INT32 * p_tile_x1, OPJ_INT32 * p_tile_y1, 1379 OPJ_UINT32 * p_nb_comps, 1380 OPJ_BOOL * p_should_go_on ); 1381 1382 /** 1383 * Reads a tile data. This function is compulsory and allows one to decode tile data. opj_read_tile_header should be called before. 1384 * The user may need to refer to the image got by opj_read_header to understand the size being taken by the tile. 1385 * 1386 * @param p_codec the jpeg2000 codec. 1387 * @param p_tile_index the index of the tile being decoded, this should be the value set by opj_read_tile_header. 1388 * @param p_data pointer to a memory block that will hold the decoded data. 1389 * @param p_data_size size of p_data. p_data_size should be bigger or equal to the value set by opj_read_tile_header. 1390 * @param p_stream the stream to decode. 1391 * 1392 * @return true if the data could be decoded. 1393 */ 1394 OPJ_API OPJ_BOOL OPJ_CALLCONV opj_decode_tile_data( opj_codec_t *p_codec, 1395 OPJ_UINT32 p_tile_index, 1396 OPJ_BYTE * p_data, 1397 OPJ_UINT32 p_data_size, 1398 opj_stream_t *p_stream ); 1399 1400 /* COMPRESSION FUNCTIONS*/ 1401 1402 /** 1403 * Creates a J2K/JP2 compression structure 1404 * @param format Coder to select 1405 * @return Returns a handle to a compressor if successful, returns NULL otherwise 1406 */ 1407 OPJ_API opj_codec_t* OPJ_CALLCONV opj_create_compress(OPJ_CODEC_FORMAT format); 1408 1409 /** 1410 Set encoding parameters to default values, that means : 1411 <ul> 1412 <li>Lossless 1413 <li>1 tile 1414 <li>Size of precinct : 2^15 x 2^15 (means 1 precinct) 1415 <li>Size of code-block : 64 x 64 1416 <li>Number of resolutions: 6 1417 <li>No SOP marker in the codestream 1418 <li>No EPH marker in the codestream 1419 <li>No sub-sampling in x or y direction 1420 <li>No mode switch activated 1421 <li>Progression order: LRCP 1422 <li>No index file 1423 <li>No ROI upshifted 1424 <li>No offset of the origin of the image 1425 <li>No offset of the origin of the tiles 1426 <li>Reversible DWT 5-3 1427 </ul> 1428 @param parameters Compression parameters 1429 */ 1430 OPJ_API void OPJ_CALLCONV opj_set_default_encoder_parameters(opj_cparameters_t *parameters); 1431 1432 /** 1433 * Setup the encoder parameters using the current image and using user parameters. 1434 * @param p_codec Compressor handle 1435 * @param parameters Compression parameters 1436 * @param image Input filled image 1437 */ 1438 OPJ_API OPJ_BOOL OPJ_CALLCONV opj_setup_encoder(opj_codec_t *p_codec, 1439 opj_cparameters_t *parameters, 1440 opj_image_t *image); 1441 1442 /** 1443 * Start to compress the current image. 1444 * @param p_codec Compressor handle 1445 * @param image Input filled image 1446 * @param p_stream Input stgream 1447 */ 1448 OPJ_API OPJ_BOOL OPJ_CALLCONV opj_start_compress ( opj_codec_t *p_codec, 1449 opj_image_t * p_image, 1450 opj_stream_t *p_stream); 1451 1452 /** 1453 * End to compress the current image. 1454 * @param p_codec Compressor handle 1455 * @param p_stream Input stgream 1456 */ 1457 OPJ_API OPJ_BOOL OPJ_CALLCONV opj_end_compress (opj_codec_t *p_codec, 1458 opj_stream_t *p_stream); 1459 1460 /** 1461 * Encode an image into a JPEG-2000 codestream 1462 * @param p_codec compressor handle 1463 * @param p_stream Output buffer stream 1464 * 1465 * @return Returns true if successful, returns false otherwise 1466 */ 1467 OPJ_API OPJ_BOOL OPJ_CALLCONV opj_encode(opj_codec_t *p_codec, 1468 opj_stream_t *p_stream); 1469 /* 1470 ========================================================== 1471 codec output functions definitions 1472 ========================================================== 1473 */ 1474 /* EXPERIMENTAL FUNCTIONS FOR NOW, USED ONLY IN J2K_DUMP*/ 1475 1476 /** 1477 Destroy Codestream information after compression or decompression 1478 @param cstr_info Codestream information structure 1479 */ 1480 OPJ_API void OPJ_CALLCONV opj_destroy_cstr_info(opj_codestream_info_v2_t **cstr_info); 1481 1482 1483 /** 1484 * Dump the codec information into the output stream 1485 * 1486 * @param p_codec the jpeg2000 codec. 1487 * @param info_flag type of information dump. 1488 * @param output_stream output stream where dump the informations get from the codec. 1489 * 1490 */ 1491 OPJ_API void OPJ_CALLCONV opj_dump_codec( opj_codec_t *p_codec, 1492 OPJ_INT32 info_flag, 1493 FILE* output_stream); 1494 1495 /** 1496 * Get the codestream information from the codec 1497 * 1498 * @param p_codec the jpeg2000 codec. 1499 * 1500 * @return a pointer to a codestream information structure. 1501 * 1502 */ 1503 OPJ_API opj_codestream_info_v2_t* OPJ_CALLCONV opj_get_cstr_info(opj_codec_t *p_codec); 1504 1505 /** 1506 * Get the codestream index from the codec 1507 * 1508 * @param p_codec the jpeg2000 codec. 1509 * 1510 * @return a pointer to a codestream index structure. 1511 * 1512 */ 1513 OPJ_API opj_codestream_index_t * OPJ_CALLCONV opj_get_cstr_index(opj_codec_t *p_codec); 1514 1515 OPJ_API void OPJ_CALLCONV opj_destroy_cstr_index(opj_codestream_index_t **p_cstr_index); 1516 1517 1518 /** 1519 * Get the JP2 file information from the codec FIXME 1520 * 1521 * @param p_codec the jpeg2000 codec. 1522 * 1523 * @return a pointer to a JP2 metadata structure. 1524 * 1525 */ 1526 OPJ_API opj_jp2_metadata_t* OPJ_CALLCONV opj_get_jp2_metadata(opj_codec_t *p_codec); 1527 1528 /** 1529 * Get the JP2 file index from the codec FIXME 1530 * 1531 * @param p_codec the jpeg2000 codec. 1532 * 1533 * @return a pointer to a JP2 index structure. 1534 * 1535 */ 1536 OPJ_API opj_jp2_index_t* OPJ_CALLCONV opj_get_jp2_index(opj_codec_t *p_codec); 1537 1538 1539 /* 1540 ========================================================== 1541 MCT functions 1542 ========================================================== 1543 */ 1544 1545 /** 1546 * Sets the MCT matrix to use. 1547 * 1548 * @param parameters the parameters to change. 1549 * @param pEncodingMatrix the encoding matrix. 1550 * @param p_dc_shift the dc shift coefficients to use. 1551 * @param pNbComp the number of components of the image. 1552 * 1553 * @return true if the parameters could be set. 1554 */ 1555 OPJ_API OPJ_BOOL OPJ_CALLCONV opj_set_MCT( opj_cparameters_t *parameters, 1556 OPJ_FLOAT32 * pEncodingMatrix, 1557 OPJ_INT32 * p_dc_shift, 1558 OPJ_UINT32 pNbComp); 1559 1560 1561 1562 #ifdef __cplusplus 1563 } 1564 #endif 1565 1566 #endif /* OPENJPEG_H */ 1567