1 #ifndef _UAPI__LINUX_MROUTE6_H
2 #define _UAPI__LINUX_MROUTE6_H
3 
4 #include <linux/types.h>
5 #include <linux/sockios.h>
6 
7 /*
8  *	Based on the MROUTING 3.5 defines primarily to keep
9  *	source compatibility with BSD.
10  *
11  *	See the pim6sd code for the original history.
12  *
13  *      Protocol Independent Multicast (PIM) data structures included
14  *      Carlos Picoto (cap@di.fc.ul.pt)
15  *
16  */
17 
18 #define MRT6_BASE	200
19 #define MRT6_INIT	(MRT6_BASE)	/* Activate the kernel mroute code 	*/
20 #define MRT6_DONE	(MRT6_BASE+1)	/* Shutdown the kernel mroute		*/
21 #define MRT6_ADD_MIF	(MRT6_BASE+2)	/* Add a virtual interface		*/
22 #define MRT6_DEL_MIF	(MRT6_BASE+3)	/* Delete a virtual interface		*/
23 #define MRT6_ADD_MFC	(MRT6_BASE+4)	/* Add a multicast forwarding entry	*/
24 #define MRT6_DEL_MFC	(MRT6_BASE+5)	/* Delete a multicast forwarding entry	*/
25 #define MRT6_VERSION	(MRT6_BASE+6)	/* Get the kernel multicast version	*/
26 #define MRT6_ASSERT	(MRT6_BASE+7)	/* Activate PIM assert mode		*/
27 #define MRT6_PIM	(MRT6_BASE+8)	/* enable PIM code			*/
28 #define MRT6_TABLE	(MRT6_BASE+9)	/* Specify mroute table ID		*/
29 #define MRT6_ADD_MFC_PROXY	(MRT6_BASE+10)	/* Add a (*,*|G) mfc entry	*/
30 #define MRT6_DEL_MFC_PROXY	(MRT6_BASE+11)	/* Del a (*,*|G) mfc entry	*/
31 #define MRT6_MAX	(MRT6_BASE+11)
32 
33 #define SIOCGETMIFCNT_IN6	SIOCPROTOPRIVATE	/* IP protocol privates */
34 #define SIOCGETSGCNT_IN6	(SIOCPROTOPRIVATE+1)
35 #define SIOCGETRPF	(SIOCPROTOPRIVATE+2)
36 
37 #define MAXMIFS		32
38 typedef unsigned long mifbitmap_t;	/* User mode code depends on this lot */
39 typedef unsigned short mifi_t;
40 #define ALL_MIFS	((mifi_t)(-1))
41 
42 #ifndef IF_SETSIZE
43 #define IF_SETSIZE	256
44 #endif
45 
46 typedef	__u32		if_mask;
47 #define NIFBITS (sizeof(if_mask) * 8)        /* bits per mask */
48 
49 #if !defined(__KERNEL__)
50 #if !defined(DIV_ROUND_UP)
51 #define	DIV_ROUND_UP(x,y)	(((x) + ((y) - 1)) / (y))
52 #endif
53 #endif
54 
55 typedef struct if_set {
56 	if_mask ifs_bits[DIV_ROUND_UP(IF_SETSIZE, NIFBITS)];
57 } if_set;
58 
59 #define IF_SET(n, p)    ((p)->ifs_bits[(n)/NIFBITS] |= (1 << ((n) % NIFBITS)))
60 #define IF_CLR(n, p)    ((p)->ifs_bits[(n)/NIFBITS] &= ~(1 << ((n) % NIFBITS)))
61 #define IF_ISSET(n, p)  ((p)->ifs_bits[(n)/NIFBITS] & (1 << ((n) % NIFBITS)))
62 #define IF_COPY(f, t)   bcopy(f, t, sizeof(*(f)))
63 #define IF_ZERO(p)      bzero(p, sizeof(*(p)))
64 
65 /*
66  *	Passed by mrouted for an MRT_ADD_MIF - again we use the
67  *	mrouted 3.6 structures for compatibility
68  */
69 
70 struct mif6ctl {
71 	mifi_t	mif6c_mifi;		/* Index of MIF */
72 	unsigned char mif6c_flags;	/* MIFF_ flags */
73 	unsigned char vifc_threshold;	/* ttl limit */
74 	__u16	 mif6c_pifi;		/* the index of the physical IF */
75 	unsigned int vifc_rate_limit;	/* Rate limiter values (NI) */
76 };
77 
78 #define MIFF_REGISTER	0x1	/* register vif	*/
79 
80 /*
81  *	Cache manipulation structures for mrouted and PIMd
82  */
83 
84 struct mf6cctl {
85 	struct sockaddr_in6 mf6cc_origin;		/* Origin of mcast	*/
86 	struct sockaddr_in6 mf6cc_mcastgrp;		/* Group in question	*/
87 	mifi_t	mf6cc_parent;			/* Where it arrived	*/
88 	struct if_set mf6cc_ifset;		/* Where it is going */
89 };
90 
91 /*
92  *	Group count retrieval for pim6sd
93  */
94 
95 struct sioc_sg_req6 {
96 	struct sockaddr_in6 src;
97 	struct sockaddr_in6 grp;
98 	unsigned long pktcnt;
99 	unsigned long bytecnt;
100 	unsigned long wrong_if;
101 };
102 
103 /*
104  *	To get vif packet counts
105  */
106 
107 struct sioc_mif_req6 {
108 	mifi_t	mifi;		/* Which iface */
109 	unsigned long icount;	/* In packets */
110 	unsigned long ocount;	/* Out packets */
111 	unsigned long ibytes;	/* In bytes */
112 	unsigned long obytes;	/* Out bytes */
113 };
114 
115 /*
116  *	That's all usermode folks
117  */
118 
119 
120 
121 /*
122  * Structure used to communicate from kernel to multicast router.
123  * We'll overlay the structure onto an MLD header (not an IPv6 heder like igmpmsg{}
124  * used for IPv4 implementation). This is because this structure will be passed via an
125  * IPv6 raw socket, on which an application will only receiver the payload i.e the data after
126  * the IPv6 header and all the extension headers. (See section 3 of RFC 3542)
127  */
128 
129 struct mrt6msg {
130 #define MRT6MSG_NOCACHE		1
131 #define MRT6MSG_WRONGMIF	2
132 #define MRT6MSG_WHOLEPKT	3		/* used for use level encap */
133 	__u8		im6_mbz;		/* must be zero		   */
134 	__u8		im6_msgtype;		/* what type of message    */
135 	__u16		im6_mif;		/* mif rec'd on		   */
136 	__u32		im6_pad;		/* padding for 64 bit arch */
137 	struct in6_addr	im6_src, im6_dst;
138 };
139 
140 #endif /* _UAPI__LINUX_MROUTE6_H */
141