1 /******************************************************************************
2  *
3  *  Copyright (C) 2002-2012 Broadcom Corporation
4  *
5  *  Licensed under the Apache License, Version 2.0 (the "License");
6  *  you may not use this file except in compliance with the License.
7  *  You may obtain a copy of the License at:
8  *
9  *  http://www.apache.org/licenses/LICENSE-2.0
10  *
11  *  Unless required by applicable law or agreed to in writing, software
12  *  distributed under the License is distributed on an "AS IS" BASIS,
13  *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
14  *  See the License for the specific language governing permissions and
15  *  limitations under the License.
16  *
17  ******************************************************************************/
18 
19 /******************************************************************************
20  *
21  *  This interface file contains the interface to the Audio Video
22  *  Distribution Transport Protocol (AVDTP).
23  *
24  ******************************************************************************/
25 #ifndef AVDT_API_H
26 #define AVDT_API_H
27 
28 #include "bt_types.h"
29 #include "bt_target.h"
30 
31 /*****************************************************************************
32 **  Constants
33 *****************************************************************************/
34 #ifndef AVDT_VERSION
35 #define AVDT_VERSION                0x0102
36 #endif
37 #define AVDT_VERSION_SYNC           0x0103
38 
39 /* API function return value result codes. */
40 #define AVDT_SUCCESS                0       /* Function successful */
41 #define AVDT_BAD_PARAMS             1       /* Invalid parameters */
42 #define AVDT_NO_RESOURCES           2       /* Not enough resources */
43 #define AVDT_BAD_HANDLE             3       /* Bad handle */
44 #define AVDT_BUSY                   4       /* A procedure is already in progress */
45 #define AVDT_WRITE_FAIL             5       /* Write failed */
46 
47 /* The index to access the codec type in codec_info[]. */
48 #define AVDT_CODEC_TYPE_INDEX       2
49 
50 /* The size in bytes of a Adaptation Layer header. */
51 #define AVDT_AL_HDR_SIZE         3
52 
53 /* The size in bytes of a media packet header. */
54 #define AVDT_MEDIA_HDR_SIZE         12
55 
56 /* The handle is used when reporting MULTI_AV specific events */
57 #define AVDT_MULTI_AV_HANDLE        0xFF
58 
59 /* The number of bytes needed by the protocol stack for the protocol headers
60 ** of a media packet.  This is the size of the media packet header, the
61 ** L2CAP packet header and HCI header.
62 */
63 #define AVDT_MEDIA_OFFSET           23
64 
65 /* The marker bit is used by the application to mark significant events such
66 ** as frame boundaries in the data stream.  This constant is used to check or
67 ** set the marker bit in the m_pt parameter of an AVDT_WriteReq()
68 ** or AVDT_DATA_IND_EVT.
69 */
70 #define AVDT_MARKER_SET             0x80
71 
72 /* SEP Type.  This indicates the stream endpoint type. */
73 #define AVDT_TSEP_SRC               0       /* Source SEP */
74 #define AVDT_TSEP_SNK               1       /* Sink SEP */
75 
76 /* initiator/acceptor role for adaption */
77 #define AVDT_INT                0       /* initiator */
78 #define AVDT_ACP                1       /* acceptor */
79 
80 /* Media Type.  This indicates the media type of the stream endpoint. */
81 #define AVDT_MEDIA_AUDIO            0       /* Audio SEP */
82 #define AVDT_MEDIA_VIDEO            1       /* Video SEP */
83 #define AVDT_MEDIA_MULTI            2       /* Multimedia SEP */
84 
85 /* for reporting packets */
86 #define AVDT_RTCP_PT_SR         200     /* the packet type - SR (Sender Report) */
87 #define AVDT_RTCP_PT_RR         201     /* the packet type - RR (Receiver Report) */
88 #define AVDT_RTCP_PT_SDES       202     /* the packet type - SDES (Source Description) */
89 typedef UINT8 AVDT_REPORT_TYPE;
90 
91 #define AVDT_RTCP_SDES_CNAME    1       /* SDES item CNAME */
92 #ifndef AVDT_MAX_CNAME_SIZE
93 #define AVDT_MAX_CNAME_SIZE     28
94 #endif
95 
96 /* Protocol service capabilities.  This indicates the protocol service
97 ** capabilities of a stream endpoint.  This value is a mask.
98 ** Multiple values can be combined with a bitwise OR.
99 */
100 #define AVDT_PSC_TRANS              (1<<1)  /* Media transport */
101 #define AVDT_PSC_REPORT             (1<<2)  /* Reporting */
102 #define AVDT_PSC_RECOV              (1<<3)  /* Recovery */
103 #define AVDT_PSC_HDRCMP             (1<<5)  /* Header compression */
104 #define AVDT_PSC_MUX                (1<<6)  /* Multiplexing */
105 #define AVDT_PSC_DELAY_RPT          (1<<8)  /* Delay Report */
106 
107 /* Recovery type.  This indicates the recovery type. */
108 #define AVDT_RECOV_RFC2733          1       /* RFC2733 recovery */
109 
110 /* Header compression capabilities.  This indicates the header compression
111 ** capabilities.  This value is a mask.  Multiple values can be combined
112 ** with a bitwise OR.
113 */
114 #define AVDT_HDRCMP_MEDIA           (1<<5)  /* Available for media packets */
115 #define AVDT_HDRCMP_RECOV           (1<<6)  /* Available for recovery packets */
116 #define AVDT_HDRCMP_BACKCH          (1<<7)  /* Back channel supported */
117 
118 /* Multiplexing capabilities mask. */
119 #define AVDT_MUX_FRAG               (1<<7)  /* Allow Adaptation Layer Fragmentation */
120 
121 /* Application service category. This indicates the application
122 ** service category.
123 */
124 #define AVDT_ASC_PROTECT            4       /* Content protection */
125 #define AVDT_ASC_CODEC              7       /* Codec */
126 
127 /* Error codes.  The following are error codes defined in the AVDTP and GAVDP
128 ** specifications.  These error codes communicate protocol errors between
129 ** AVDTP and the application.  More detailed descriptions of the error codes
130 ** and their appropriate use can be found in the AVDTP and GAVDP specifications.
131 ** These error codes are unrelated to the result values returned by the
132 ** AVDTP API functions.
133 */
134 #define AVDT_ERR_HEADER             0x01    /* Bad packet header format */
135 #define AVDT_ERR_LENGTH             0x11    /* Bad packet length */
136 #define AVDT_ERR_SEID               0x12    /* Invalid SEID */
137 #define AVDT_ERR_IN_USE             0x13    /* The SEP is in use */
138 #define AVDT_ERR_NOT_IN_USE         0x14    /* The SEP is not in use */
139 #define AVDT_ERR_CATEGORY           0x17    /* Bad service category */
140 #define AVDT_ERR_PAYLOAD            0x18    /* Bad payload format */
141 #define AVDT_ERR_NSC                0x19    /* Requested command not supported */
142 #define AVDT_ERR_INVALID_CAP        0x1A    /* Reconfigure attempted invalid capabilities */
143 #define AVDT_ERR_RECOV_TYPE         0x22    /* Requested recovery type not defined */
144 #define AVDT_ERR_MEDIA_TRANS        0x23    /* Media transport capability not correct */
145 #define AVDT_ERR_RECOV_FMT          0x25    /* Recovery service capability not correct */
146 #define AVDT_ERR_ROHC_FMT           0x26    /* Header compression service capability not correct */
147 #define AVDT_ERR_CP_FMT             0x27    /* Content protection service capability not correct */
148 #define AVDT_ERR_MUX_FMT            0x28    /* Multiplexing service capability not correct */
149 #define AVDT_ERR_UNSUP_CFG          0x29    /* Configuration not supported */
150 #define AVDT_ERR_BAD_STATE          0x31    /* Message cannot be processed in this state */
151 #define AVDT_ERR_REPORT_FMT         0x65    /* Report service capability not correct */
152 #define AVDT_ERR_SERVICE            0x80    /* Invalid service category */
153 #define AVDT_ERR_RESOURCE           0x81    /* Insufficient resources */
154 #define AVDT_ERR_INVALID_MCT        0xC1    /* Invalid Media Codec Type */
155 #define AVDT_ERR_UNSUP_MCT          0xC2    /* Unsupported Media Codec Type */
156 #define AVDT_ERR_INVALID_LEVEL      0xC3    /* Invalid Level */
157 #define AVDT_ERR_UNSUP_LEVEL        0xC4    /* Unsupported Level */
158 #define AVDT_ERR_INVALID_CP         0xE0    /* Invalid Content Protection Type */
159 #define AVDT_ERR_INVALID_FORMAT     0xE1    /* Invalid Content Protection format */
160 
161 /* Additional error codes.  This indicates error codes used by AVDTP
162 ** in addition to the ones defined in the specifications.
163 */
164 #define AVDT_ERR_CONNECT            0x07    /* Connection failed. */
165 #define AVDT_ERR_TIMEOUT            0x08    /* Response timeout. */
166 
167 /* Control callback events. */
168 #define AVDT_DISCOVER_CFM_EVT       0       /* Discover confirm */
169 #define AVDT_GETCAP_CFM_EVT         1       /* Get capabilities confirm */
170 #define AVDT_OPEN_CFM_EVT           2       /* Open confirm */
171 #define AVDT_OPEN_IND_EVT           3       /* Open indication */
172 #define AVDT_CONFIG_IND_EVT         4       /* Configuration indication */
173 #define AVDT_START_CFM_EVT          5       /* Start confirm */
174 #define AVDT_START_IND_EVT          6       /* Start indication */
175 #define AVDT_SUSPEND_CFM_EVT        7       /* Suspend confirm */
176 #define AVDT_SUSPEND_IND_EVT        8       /* Suspend indication */
177 #define AVDT_CLOSE_CFM_EVT          9       /* Close confirm */
178 #define AVDT_CLOSE_IND_EVT          10      /* Close indication */
179 #define AVDT_RECONFIG_CFM_EVT       11      /* Reconfiguration confirm */
180 #define AVDT_RECONFIG_IND_EVT       12      /* Reconfiguration indication */
181 #define AVDT_SECURITY_CFM_EVT       13      /* Security confirm */
182 #define AVDT_SECURITY_IND_EVT       14      /* Security indication */
183 #define AVDT_WRITE_CFM_EVT          15      /* Write confirm */
184 #define AVDT_CONNECT_IND_EVT        16      /* Signaling channel connected */
185 #define AVDT_DISCONNECT_IND_EVT     17      /* Signaling channel disconnected */
186 #define AVDT_REPORT_CONN_EVT        18      /* Reporting channel connected */
187 #define AVDT_REPORT_DISCONN_EVT     19      /* Reporting channel disconnected */
188 #define AVDT_DELAY_REPORT_EVT       20      /* Delay report received */
189 #define AVDT_DELAY_REPORT_CFM_EVT   21      /* Delay report response received */
190 
191 #define AVDT_MAX_EVT                (AVDT_DELAY_REPORT_CFM_EVT)
192 
193 /* PSM for AVDT */
194 #define AVDT_PSM                    0x0019
195 
196 /* Nonsupported protocol command messages.  This value is used in tAVDT_CS */
197 #define AVDT_NSC_SUSPEND            0x01    /* Suspend command not supported */
198 #define AVDT_NSC_RECONFIG           0x02    /* Reconfigure command not supported */
199 #define AVDT_NSC_SECURITY           0x04    /* Security command not supported */
200 
201 /*****************************************************************************
202 **  Type Definitions
203 *****************************************************************************/
204 
205 typedef struct
206 {
207     UINT32  ntp_sec;        /* NTP time: seconds relative to 0h UTC on 1 January 1900 */
208     UINT32  ntp_frac;       /* NTP time: the fractional part */
209     UINT32  rtp_time;       /* timestamp in RTP header */
210     UINT32  pkt_count;      /* sender's packet count: since starting transmission
211                              * up until the time this SR packet was generated. */
212     UINT32  octet_count;    /* sender's octet count: same comment */
213 } tAVDT_SENDER_INFO;
214 
215 typedef struct
216 {
217     UINT8   frag_lost;      /* fraction lost since last RR */
218     UINT32  packet_lost;    /* cumulative number of packets lost since the beginning */
219     UINT32  seq_num_rcvd;   /* extended highest sequence number received */
220     UINT32  jitter;         /* interarrival jitter */
221     UINT32  lsr;            /* last SR timestamp */
222     UINT32  dlsr;           /* delay since last SR */
223 } tAVDT_REPORT_BLK;
224 
225 typedef union
226 {
227     tAVDT_SENDER_INFO   sr;
228     tAVDT_REPORT_BLK    rr;
229     UINT8               cname[AVDT_MAX_CNAME_SIZE + 1];
230 } tAVDT_REPORT_DATA;
231 
232 /* This structure contains parameters which are set at registration. */
233 typedef struct {
234     UINT16      ctrl_mtu;   /* L2CAP MTU of the AVDTP signaling channel */
235     UINT8       ret_tout;   /* AVDTP signaling retransmission timeout */
236     UINT8       sig_tout;   /* AVDTP signaling message timeout */
237     UINT8       idle_tout;  /* AVDTP idle signaling channel timeout */
238     UINT8       sec_mask;   /* Security mask for BTM_SetSecurityLevel() */
239 } tAVDT_REG;
240 
241 /* This structure contains the SEP information.  This information is
242 ** transferred during the discovery procedure.
243 */
244 typedef struct {
245     BOOLEAN     in_use;         /* TRUE if stream is currently in use */
246     UINT8       seid;           /* Stream endpoint identifier */
247     UINT8       media_type;     /* Media type */
248     UINT8       tsep;           /* SEP type */
249 } tAVDT_SEP_INFO;
250 
251 /* This structure contains the SEP configuration. */
252 typedef struct {
253     UINT8   codec_info[AVDT_CODEC_SIZE];        /* Codec capabilities array */
254     UINT8   protect_info[AVDT_PROTECT_SIZE];    /* Content protection capabilities */
255     UINT8   num_codec;                          /* Number of media codec information elements */
256     UINT8   num_protect;                        /* Number of content protection information elements */
257     UINT16  psc_mask;                           /* Protocol service capabilities mask */
258     UINT8   recov_type;                         /* Recovery type */
259     UINT8   recov_mrws;                         /* Maximum recovery window size */
260     UINT8   recov_mnmp;                         /* Recovery maximum number of media packets */
261     UINT8   hdrcmp_mask;                        /* Header compression capabilities */
262 #if AVDT_MULTIPLEXING == TRUE
263     UINT8   mux_mask;                           /* Multiplexing capabilities. AVDT_MUX_XXX bits can be combined with a bitwise OR */
264     UINT8   mux_tsid_media;                     /* TSID for media transport session */
265     UINT8   mux_tcid_media;                     /* TCID for media transport session */
266     UINT8   mux_tsid_report;                    /* TSID for reporting transport session */
267     UINT8   mux_tcid_report;                    /* TCID for reporting transport session */
268     UINT8   mux_tsid_recov;                     /* TSID for recovery transport session */
269     UINT8   mux_tcid_recov;                     /* TCID for recovery transport session */
270 #endif
271 } tAVDT_CFG;
272 
273 /* Header structure for callback event parameters. */
274 typedef struct {
275     UINT8           err_code;           /* Zero if operation succeeded; nonzero if operation failed */
276     UINT8           err_param;          /* Error parameter included for some events */
277     UINT8           label;              /* Transaction label */
278     UINT8           seid;               /* For internal use only */
279     UINT8           sig_id;             /* For internal use only */
280     UINT8           ccb_idx;            /* For internal use only */
281 } tAVDT_EVT_HDR;
282 
283 /* This data structure is associated with the AVDT_GETCAP_CFM_EVT,
284 ** AVDT_RECONFIG_IND_EVT, and AVDT_RECONFIG_CFM_EVT.
285 */
286 typedef struct {
287     tAVDT_EVT_HDR   hdr;                /* Event header */
288     tAVDT_CFG       *p_cfg;             /* Pointer to configuration for this SEP */
289 } tAVDT_CONFIG;
290 
291 /* This data structure is associated with the AVDT_CONFIG_IND_EVT. */
292 typedef struct {
293     tAVDT_EVT_HDR   hdr;                /* Event header */
294     tAVDT_CFG       *p_cfg;             /* Pointer to configuration for this SEP */
295     UINT8           int_seid;           /* Stream endpoint ID of stream initiating the operation */
296 } tAVDT_SETCONFIG;
297 
298 /* This data structure is associated with the AVDT_OPEN_IND_EVT and AVDT_OPEN_CFM_EVT. */
299 typedef struct {
300     tAVDT_EVT_HDR   hdr;                /* Event header */
301     UINT16          peer_mtu;           /* Transport channel L2CAP MTU of the peer */
302     UINT16          lcid;               /* L2CAP LCID for media channel */
303 } tAVDT_OPEN;
304 
305 /* This data structure is associated with the AVDT_SECURITY_IND_EVT
306 ** and AVDT_SECURITY_CFM_EVT.
307 */
308 typedef struct {
309     tAVDT_EVT_HDR   hdr;                /* Event header */
310     UINT8           *p_data;            /* Pointer to security data */
311     UINT16          len;                /* Length in bytes of the security data */
312 } tAVDT_SECURITY;
313 
314 /* This data structure is associated with the AVDT_DISCOVER_CFM_EVT. */
315 typedef struct {
316     tAVDT_EVT_HDR   hdr;                /* Event header */
317     tAVDT_SEP_INFO  *p_sep_info;        /* Pointer to SEP information */
318     UINT8           num_seps;           /* Number of stream endpoints */
319 } tAVDT_DISCOVER;
320 
321 /* This data structure is associated with the AVDT_DELAY_REPORT_EVT. */
322 typedef struct {
323     tAVDT_EVT_HDR   hdr;                /* Event header */
324     UINT16          delay;              /* Delay value */
325 } tAVDT_DELAY_RPT;
326 
327 /* Union of all control callback event data structures */
328 typedef union {
329     tAVDT_EVT_HDR       hdr;
330     tAVDT_DISCOVER      discover_cfm;
331     tAVDT_CONFIG        getcap_cfm;
332     tAVDT_OPEN          open_cfm;
333     tAVDT_OPEN          open_ind;
334     tAVDT_SETCONFIG     config_ind;
335     tAVDT_EVT_HDR       start_cfm;
336     tAVDT_EVT_HDR       suspend_cfm;
337     tAVDT_EVT_HDR       close_cfm;
338     tAVDT_CONFIG        reconfig_cfm;
339     tAVDT_CONFIG        reconfig_ind;
340     tAVDT_SECURITY      security_cfm;
341     tAVDT_SECURITY      security_ind;
342     tAVDT_EVT_HDR       connect_ind;
343     tAVDT_EVT_HDR       disconnect_ind;
344     tAVDT_EVT_HDR       report_conn;
345     tAVDT_DELAY_RPT     delay_rpt_cmd;
346 } tAVDT_CTRL;
347 
348 /* This is the control callback function.  This function passes control events
349 ** to the application.  This function is required for all registered stream
350 ** endpoints and for the AVDT_DiscoverReq() and AVDT_GetCapReq() functions.
351 **
352 */
353 typedef void (tAVDT_CTRL_CBACK)(UINT8 handle, BD_ADDR bd_addr, UINT8 event,
354                                 tAVDT_CTRL *p_data);
355 
356 /* This is the data callback function.  It is executed when AVDTP has a media
357 ** packet ready for the application.  This function is required for SNK
358 ** endpoints and not applicable for SRC endpoints.
359 */
360 typedef void (tAVDT_DATA_CBACK)(UINT8 handle, BT_HDR *p_pkt, UINT32 time_stamp,
361                                 UINT8 m_pt);
362 
363 #if AVDT_MULTIPLEXING == TRUE
364 /* This is the second version of the data callback function. This version uses
365 ** application buffer assigned by AVDT_SetMediaBuf. Caller can assign different
366 ** buffer during callback or can leave the current buffer for further using.
367 ** This callback is called when AVDTP has a media packet ready for the application.
368 ** This function is required for SNK endpoints and not applicable for SRC endpoints.
369 */
370 typedef void (tAVDT_MEDIA_CBACK)(UINT8 handle, UINT8 *p_payload, UINT32 payload_len,
371                                 UINT32 time_stamp, UINT16 seq_num, UINT8 m_pt, UINT8 marker);
372 #endif
373 
374 #if AVDT_REPORTING == TRUE
375 /* This is the report callback function.  It is executed when AVDTP has a reporting
376 ** packet ready for the application.  This function is required for streams
377 ** created with AVDT_PSC_REPORT.
378 */
379 typedef void (tAVDT_REPORT_CBACK)(UINT8 handle, AVDT_REPORT_TYPE type,
380                                 tAVDT_REPORT_DATA *p_data);
381 #endif
382 
383 typedef UINT16 (tAVDT_GETCAP_REQ) (BD_ADDR bd_addr, UINT8 seid, tAVDT_CFG *p_cfg, tAVDT_CTRL_CBACK *p_cback);
384 
385 /* This structure contains information required when a stream is created.
386 ** It is passed to the AVDT_CreateStream() function.
387 */
388 typedef struct {
389     tAVDT_CFG           cfg;            /* SEP configuration */
390     tAVDT_CTRL_CBACK    *p_ctrl_cback;  /* Control callback function */
391     tAVDT_DATA_CBACK    *p_data_cback;  /* Data callback function */
392 #if AVDT_MULTIPLEXING == TRUE
393     tAVDT_MEDIA_CBACK   *p_media_cback; /* Media callback function. It will be called only if p_data_cback is NULL */
394 #endif
395 #if AVDT_REPORTING == TRUE
396     tAVDT_REPORT_CBACK  *p_report_cback;/* Report callback function. */
397 #endif
398     UINT16              mtu;            /* The L2CAP MTU of the transport channel */
399     UINT16              flush_to;       /* The L2CAP flush timeout of the transport channel */
400     UINT8               tsep;           /* SEP type */
401     UINT8               media_type;     /* Media type */
402     UINT16              nsc_mask;       /* Nonsupported protocol command messages */
403 } tAVDT_CS;
404 
405 /* AVDT data option mask is used in the write request */
406 #define AVDT_DATA_OPT_NONE      0x00         /* No option still add RTP header */
407 #define AVDT_DATA_OPT_NO_RTP   (0x01 << 0)   /* Skip adding RTP header */
408 
409 typedef UINT8 tAVDT_DATA_OPT_MASK;
410 
411 
412 
413 /*****************************************************************************
414 **  External Function Declarations
415 *****************************************************************************/
416 #ifdef __cplusplus
417 extern "C"
418 {
419 #endif
420 
421 /*******************************************************************************
422 **
423 ** Function         AVDT_Register
424 **
425 ** Description      This is the system level registration function for the
426 **                  AVDTP protocol.  This function initializes AVDTP and
427 **                  prepares the protocol stack for its use.  This function
428 **                  must be called once by the system or platform using AVDTP
429 **                  before the other functions of the API an be used.
430 **
431 **
432 ** Returns          void
433 **
434 *******************************************************************************/
435 extern void AVDT_Register(tAVDT_REG *p_reg, tAVDT_CTRL_CBACK *p_cback);
436 
437 /*******************************************************************************
438 **
439 ** Function         AVDT_Deregister
440 **
441 ** Description      This function is called to deregister use AVDTP protocol.
442 **                  It is called when AVDTP is no longer being used by any
443 **                  application in the system.  Before this function can be
444 **                  called, all streams must be removed with AVDT_RemoveStream().
445 **
446 **
447 ** Returns          void
448 **
449 *******************************************************************************/
450 extern void AVDT_Deregister(void);
451 
452 
453 /*******************************************************************************
454 **
455 ** Function         AVDT_SINK_Activate
456 **
457 ** Description      Activate SEP of A2DP Sink. In Use parameter is adjusted.
458 **                  In Use will be made false in case of activation. A2DP SRC
459 **                  will receive in_use as false and can open A2DP Sink
460 **                  connection
461 **
462 ** Returns          void
463 **
464 *******************************************************************************/
465 extern void AVDT_SINK_Activate(void);
466 
467 /*******************************************************************************
468 **
469 ** Function         AVDT_SINK_Deactivate
470 **
471 ** Description      Deactivate SEP of A2DP Sink. In Use parameter is adjusted.
472 **                  In Use will be made TRUE in case of activation. A2DP SRC
473 **                  will receive in_use as true and will not open A2DP Sink
474 **                  connection
475 **
476 ** Returns          void.
477 **
478 *******************************************************************************/
479 extern void AVDT_SINK_Deactivate(void);
480 
481 /*******************************************************************************
482 **
483 ** Function         AVDT_AbortReq
484 **
485 ** Description      Trigger Abort request to pass AVDTP Abort related mandatory
486 **                  PTS Test case.
487 **
488 ** Returns          void.
489 **
490 *******************************************************************************/
491 extern void AVDT_AbortReq(UINT8 handle);
492 
493 /*******************************************************************************
494 **
495 ** Function         AVDT_CreateStream
496 **
497 ** Description      Create a stream endpoint.  After a stream endpoint is
498 **                  created an application can initiate a connection between
499 **                  this endpoint and an endpoint on a peer device.  In
500 **                  addition, a peer device can discover, get the capabilities,
501 **                  and connect to this endpoint.
502 **
503 **
504 ** Returns          AVDT_SUCCESS if successful, otherwise error.
505 **
506 *******************************************************************************/
507 extern UINT16 AVDT_CreateStream(UINT8 *p_handle, tAVDT_CS *p_cs);
508 
509 /*******************************************************************************
510 **
511 ** Function         AVDT_RemoveStream
512 **
513 ** Description      Remove a stream endpoint.  This function is called when
514 **                  the application is no longer using a stream endpoint.
515 **                  If this function is called when the endpoint is connected
516 **                  the connection is closed and then the stream endpoint
517 **                  is removed.
518 **
519 **
520 ** Returns          AVDT_SUCCESS if successful, otherwise error.
521 **
522 *******************************************************************************/
523 extern UINT16 AVDT_RemoveStream(UINT8 handle);
524 
525 /*******************************************************************************
526 **
527 ** Function         AVDT_DiscoverReq
528 **
529 ** Description      This function initiates a connection to the AVDTP service
530 **                  on the peer device, if not already present, and discovers
531 **                  the stream endpoints on the peer device.  (Please note
532 **                  that AVDTP discovery is unrelated to SDP discovery).
533 **                  This function can be called at any time regardless of whether
534 **                  there is an AVDTP connection to the peer device.
535 **
536 **                  When discovery is complete, an AVDT_DISCOVER_CFM_EVT
537 **                  is sent to the application via its callback function.
538 **                  The application must not call AVDT_GetCapReq() or
539 **                  AVDT_DiscoverReq() again to the same device until
540 **                  discovery is complete.
541 **
542 **                  The memory addressed by sep_info is allocated by the
543 **                  application.  This memory is written to by AVDTP as part
544 **                  of the discovery procedure.  This memory must remain
545 **                  accessible until the application receives the
546 **                  AVDT_DISCOVER_CFM_EVT.
547 **
548 ** Returns          AVDT_SUCCESS if successful, otherwise error.
549 **
550 *******************************************************************************/
551 extern UINT16 AVDT_DiscoverReq(BD_ADDR bd_addr, tAVDT_SEP_INFO *p_sep_info,
552                                UINT8 max_seps, tAVDT_CTRL_CBACK *p_cback);
553 
554 
555 /*******************************************************************************
556 **
557 ** Function         AVDT_GetCapReq
558 **
559 ** Description      This function initiates a connection to the AVDTP service
560 **                  on the peer device, if not already present, and gets the
561 **                  capabilities of a stream endpoint on the peer device.
562 **                  This function can be called at any time regardless of
563 **                  whether there is an AVDTP connection to the peer device.
564 **
565 **                  When the procedure is complete, an AVDT_GETCAP_CFM_EVT is
566 **                  sent to the application via its callback function.  The
567 **                  application must not call AVDT_GetCapReq() or
568 **                  AVDT_DiscoverReq() again until the procedure is complete.
569 **
570 **                  The memory pointed to by p_cfg is allocated by the
571 **                  application.  This memory is written to by AVDTP as part
572 **                  of the get capabilities procedure.  This memory must
573 **                  remain accessible until the application receives
574 **                  the AVDT_GETCAP_CFM_EVT.
575 **
576 ** Returns          AVDT_SUCCESS if successful, otherwise error.
577 **
578 *******************************************************************************/
579 extern UINT16 AVDT_GetCapReq(BD_ADDR bd_addr, UINT8 seid, tAVDT_CFG *p_cfg,
580                              tAVDT_CTRL_CBACK *p_cback);
581 
582 /*******************************************************************************
583 **
584 ** Function         AVDT_GetAllCapReq
585 **
586 ** Description      This function initiates a connection to the AVDTP service
587 **                  on the peer device, if not already present, and gets the
588 **                  capabilities of a stream endpoint on the peer device.
589 **                  This function can be called at any time regardless of
590 **                  whether there is an AVDTP connection to the peer device.
591 **
592 **                  When the procedure is complete, an AVDT_GETCAP_CFM_EVT is
593 **                  sent to the application via its callback function.  The
594 **                  application must not call AVDT_GetCapReq() or
595 **                  AVDT_DiscoverReq() again until the procedure is complete.
596 **
597 **                  The memory pointed to by p_cfg is allocated by the
598 **                  application.  This memory is written to by AVDTP as part
599 **                  of the get capabilities procedure.  This memory must
600 **                  remain accessible until the application receives
601 **                  the AVDT_GETCAP_CFM_EVT.
602 **
603 ** Returns          AVDT_SUCCESS if successful, otherwise error.
604 **
605 *******************************************************************************/
606 extern UINT16 AVDT_GetAllCapReq(BD_ADDR bd_addr, UINT8 seid, tAVDT_CFG *p_cfg,
607                                 tAVDT_CTRL_CBACK *p_cback);
608 
609 /*******************************************************************************
610 **
611 ** Function         AVDT_DelayReport
612 **
613 ** Description      This functions sends a Delay Report to the peer device
614 **                  that is associated with a particular SEID.
615 **                  This function is called by SNK device.
616 **
617 ** Returns          AVDT_SUCCESS if successful, otherwise error.
618 **
619 *******************************************************************************/
620 extern UINT16 AVDT_DelayReport(UINT8 handle, UINT8 seid, UINT16 delay);
621 
622 /*******************************************************************************
623 **
624 ** Function         AVDT_OpenReq
625 **
626 ** Description      This function initiates a connection to the AVDTP service
627 **                  on the peer device, if not already present, and connects
628 **                  to a stream endpoint on a peer device.  When the connection
629 **                  is completed, an AVDT_OPEN_CFM_EVT is sent to the
630 **                  application via the control callback function for this handle.
631 **
632 ** Returns          AVDT_SUCCESS if successful, otherwise error.
633 **
634 *******************************************************************************/
635 extern UINT16 AVDT_OpenReq(UINT8 handle, BD_ADDR bd_addr, UINT8 seid,
636                            tAVDT_CFG *p_cfg);
637 
638 
639 /*******************************************************************************
640 **
641 ** Function         AVDT_ConfigRsp
642 **
643 ** Description      Respond to a configure request from the peer device.  This
644 **                  function must be called if the application receives an
645 **                  AVDT_CONFIG_IND_EVT through its control callback.
646 **
647 **
648 ** Returns          AVDT_SUCCESS if successful, otherwise error.
649 **
650 *******************************************************************************/
651 extern UINT16 AVDT_ConfigRsp(UINT8 handle, UINT8 label, UINT8 error_code,
652                              UINT8 category);
653 
654 /*******************************************************************************
655 **
656 ** Function         AVDT_StartReq
657 **
658 ** Description      Start one or more stream endpoints.  This initiates the
659 **                  transfer of media packets for the streams.  All stream
660 **                  endpoints must previously be opened.  When the streams
661 **                  are started, an AVDT_START_CFM_EVT is sent to the
662 **                  application via the control callback function for each stream.
663 **
664 **
665 ** Returns          AVDT_SUCCESS if successful, otherwise error.
666 **
667 *******************************************************************************/
668 extern UINT16 AVDT_StartReq(UINT8 *p_handles, UINT8 num_handles);
669 
670 /*******************************************************************************
671 **
672 ** Function         AVDT_SuspendReq
673 **
674 ** Description      Suspend one or more stream endpoints. This suspends the
675 **                  transfer of media packets for the streams.  All stream
676 **                  endpoints must previously be open and started.  When the
677 **                  streams are suspended, an AVDT_SUSPEND_CFM_EVT is sent to
678 **                  the application via the control callback function for
679 **                  each stream.
680 **
681 **
682 ** Returns          AVDT_SUCCESS if successful, otherwise error.
683 **
684 *******************************************************************************/
685 extern UINT16 AVDT_SuspendReq(UINT8 *p_handles, UINT8 num_handles);
686 
687 /*******************************************************************************
688 **
689 ** Function         AVDT_CloseReq
690 **
691 ** Description      Close a stream endpoint.  This stops the transfer of media
692 **                  packets and closes the transport channel associated with
693 **                  this stream endpoint.  When the stream is closed, an
694 **                  AVDT_CLOSE_CFM_EVT is sent to the application via the
695 **                  control callback function for this handle.
696 **
697 **
698 ** Returns          AVDT_SUCCESS if successful, otherwise error.
699 **
700 *******************************************************************************/
701 extern UINT16 AVDT_CloseReq(UINT8 handle);
702 
703 /*******************************************************************************
704 **
705 ** Function         AVDT_ReconfigReq
706 **
707 ** Description      Reconfigure a stream endpoint.  This allows the application
708 **                  to change the codec or content protection capabilities of
709 **                  a stream endpoint after it has been opened.  This function
710 **                  can only be called if the stream is opened but not started
711 **                  or if the stream has been suspended.  When the procedure
712 **                  is completed, an AVDT_RECONFIG_CFM_EVT is sent to the
713 **                  application via the control callback function for this handle.
714 **
715 **
716 ** Returns          AVDT_SUCCESS if successful, otherwise error.
717 **
718 *******************************************************************************/
719 extern UINT16 AVDT_ReconfigReq(UINT8 handle, tAVDT_CFG *p_cfg);
720 
721 /*******************************************************************************
722 **
723 ** Function         AVDT_ReconfigRsp
724 **
725 ** Description      Respond to a reconfigure request from the peer device.
726 **                  This function must be called if the application receives
727 **                  an AVDT_RECONFIG_IND_EVT through its control callback.
728 **
729 **
730 ** Returns          AVDT_SUCCESS if successful, otherwise error.
731 **
732 *******************************************************************************/
733 extern UINT16 AVDT_ReconfigRsp(UINT8 handle, UINT8 label, UINT8 error_code,
734                                UINT8 category);
735 
736 /*******************************************************************************
737 **
738 ** Function         AVDT_SecurityReq
739 **
740 ** Description      Send a security request to the peer device.  When the
741 **                  security procedure is completed, an AVDT_SECURITY_CFM_EVT
742 **                  is sent to the application via the control callback function
743 **                  for this handle.  (Please note that AVDTP security procedures
744 **                  are unrelated to Bluetooth link level security.)
745 **
746 **
747 ** Returns          AVDT_SUCCESS if successful, otherwise error.
748 **
749 *******************************************************************************/
750 extern UINT16 AVDT_SecurityReq(UINT8 handle, UINT8 *p_data, UINT16 len);
751 
752 /*******************************************************************************
753 **
754 ** Function         AVDT_SecurityRsp
755 **
756 ** Description      Respond to a security request from the peer device.
757 **                  This function must be called if the application receives
758 **                  an AVDT_SECURITY_IND_EVT through its control callback.
759 **                  (Please note that AVDTP security procedures are unrelated
760 **                  to Bluetooth link level security.)
761 **
762 **
763 ** Returns          AVDT_SUCCESS if successful, otherwise error.
764 **
765 *******************************************************************************/
766 extern UINT16 AVDT_SecurityRsp(UINT8 handle, UINT8 label, UINT8 error_code,
767                                UINT8 *p_data, UINT16 len);
768 
769 /*******************************************************************************
770 **
771 ** Function         AVDT_WriteReq
772 **
773 ** Description      Send a media packet to the peer device.  The stream must
774 **                  be started before this function is called.  Also, this
775 **                  function can only be called if the stream is a SRC.
776 **
777 **                  When AVDTP has sent the media packet and is ready for the
778 **                  next packet, an AVDT_WRITE_CFM_EVT is sent to the
779 **                  application via the control callback.  The application must
780 **                  wait for the AVDT_WRITE_CFM_EVT before it makes the next
781 **                  call to AVDT_WriteReq().  If the applications calls
782 **                  AVDT_WriteReq() before it receives the event the packet
783 **                  will not be sent.  The application may make its first call
784 **                  to AVDT_WriteReq() after it receives an AVDT_START_CFM_EVT
785 **                  or AVDT_START_IND_EVT.
786 **
787 **                  The application passes the packet using the BT_HDR structure.
788 **                  This structure is described in section 2.1.  The offset
789 **                  field must be equal to or greater than AVDT_MEDIA_OFFSET.
790 **                  This allows enough space in the buffer for the L2CAP and
791 **                  AVDTP headers.
792 **
793 **                  The memory pointed to by p_pkt must be a GKI buffer
794 **                  allocated by the application.  This buffer will be freed
795 **                  by the protocol stack; the application must not free
796 **                  this buffer.
797 **
798 **
799 ** Returns          AVDT_SUCCESS if successful, otherwise error.
800 **
801 *******************************************************************************/
802 extern UINT16 AVDT_WriteReq(UINT8 handle, BT_HDR *p_pkt, UINT32 time_stamp,
803                             UINT8 m_pt);
804 /*******************************************************************************
805 **
806 ** Function         AVDT_WriteReqOpt
807 **
808 ** Description      Send a media packet to the peer device.  The stream must
809 **                  be started before this function is called.  Also, this
810 **                  function can only be called if the stream is a SRC
811 **
812 **                  When AVDTP has sent the media packet and is ready for the
813 **                  next packet, an AVDT_WRITE_CFM_EVT is sent to the
814 **                  application via the control callback.  The application must
815 **                  wait for the AVDT_WRITE_CFM_EVT before it makes the next
816 **                  call to AVDT_WriteReq().  If the applications calls
817 **                  AVDT_WriteReq() before it receives the event the packet
818 **                  will not be sent.  The application may make its first call
819 **                  to AVDT_WriteReq() after it receives an AVDT_START_CFM_EVT
820 **                  or AVDT_START_IND_EVT.
821 **
822 **                  The application passes the packet using the BT_HDR structure
823 **                  This structure is described in section 2.1.  The offset
824 **                  field must be equal to or greater than AVDT_MEDIA_OFFSET
825 **                  (if NO_RTP is specified, L2CAP_MIN_OFFSET can be used)
826 **                  This allows enough space in the buffer for the L2CAP and
827 **                  AVDTP headers.
828 **
829 **                  The memory pointed to by p_pkt must be a GKI buffer
830 **                  allocated by the application.  This buffer will be freed
831 **                  by the protocol stack; the application must not free
832 **                  this buffer.
833 **
834 **                  The opt parameter allows passing specific options like:
835 **                  - NO_RTP : do not add the RTP header to buffer
836 **
837 ** Returns          AVDT_SUCCESS if successful, otherwise error.
838 **
839 *******************************************************************************/
840 extern UINT16 AVDT_WriteReqOpt(UINT8 handle, BT_HDR *p_pkt, UINT32 time_stamp,
841                                UINT8 m_pt, tAVDT_DATA_OPT_MASK opt);
842 
843 /*******************************************************************************
844 **
845 ** Function         AVDT_ConnectReq
846 **
847 ** Description      This function initiates an AVDTP signaling connection
848 **                  to the peer device.  When the connection is completed, an
849 **                  AVDT_CONNECT_IND_EVT is sent to the application via its
850 **                  control callback function.  If the connection attempt fails
851 **                  an AVDT_DISCONNECT_IND_EVT is sent.  The security mask
852 **                  parameter overrides the outgoing security mask set in
853 **                  AVDT_Register().
854 **
855 ** Returns          AVDT_SUCCESS if successful, otherwise error.
856 **
857 *******************************************************************************/
858 extern UINT16 AVDT_ConnectReq(BD_ADDR bd_addr, UINT8 sec_mask,
859                               tAVDT_CTRL_CBACK *p_cback);
860 
861 /*******************************************************************************
862 **
863 ** Function         AVDT_DisconnectReq
864 **
865 ** Description      This function disconnect an AVDTP signaling connection
866 **                  to the peer device.  When disconnected an
867 **                  AVDT_DISCONNECT_IND_EVT is sent to the application via its
868 **                  control callback function.
869 **
870 ** Returns          AVDT_SUCCESS if successful, otherwise error.
871 **
872 *******************************************************************************/
873 extern UINT16 AVDT_DisconnectReq(BD_ADDR bd_addr, tAVDT_CTRL_CBACK *p_cback);
874 
875 /*******************************************************************************
876 **
877 ** Function         AVDT_GetL2CapChannel
878 **
879 ** Description      Get the L2CAP CID used by the handle.
880 **
881 ** Returns          CID if successful, otherwise 0.
882 **
883 *******************************************************************************/
884 extern UINT16 AVDT_GetL2CapChannel(UINT8 handle);
885 
886 /*******************************************************************************
887 **
888 ** Function         AVDT_GetSignalChannel
889 **
890 ** Description      Get the L2CAP CID used by the signal channel of the given handle.
891 **
892 ** Returns          CID if successful, otherwise 0.
893 **
894 *******************************************************************************/
895 extern UINT16 AVDT_GetSignalChannel(UINT8 handle, BD_ADDR bd_addr);
896 
897 /*******************************************************************************
898 **
899 ** Function         AVDT_SetMediaBuf
900 **
901 ** Description      Assigns buffer for media packets or forbids using of assigned
902 **                  buffer if argument p_buf is NULL. This function can only
903 **                  be called if the stream is a SNK.
904 **
905 **                  AVDTP uses this buffer to reassemble fragmented media packets.
906 **                  When AVDTP receives a complete media packet, it calls the
907 **                  p_media_cback assigned by AVDT_CreateStream().
908 **                  This function can be called during callback to assign a
909 **                  different buffer for next media packet or can leave the current
910 **                  buffer for next packet.
911 **
912 ** Returns          AVDT_SUCCESS if successful, otherwise error.
913 **
914 *******************************************************************************/
915 extern UINT16 AVDT_SetMediaBuf(UINT8 handle, UINT8 *p_buf, UINT32 buf_len);
916 
917 /*******************************************************************************
918 **
919 ** Function         AVDT_SendReport
920 **
921 ** Description
922 **
923 **
924 **
925 ** Returns
926 **
927 *******************************************************************************/
928 extern UINT16 AVDT_SendReport(UINT8 handle, AVDT_REPORT_TYPE type,
929                               tAVDT_REPORT_DATA *p_data);
930 
931 /******************************************************************************
932 **
933 ** Function         AVDT_SetTraceLevel
934 **
935 ** Description      Sets the trace level for AVDT. If 0xff is passed, the
936 **                  current trace level is returned.
937 **
938 **                  Input Parameters:
939 **                      new_level:  The level to set the AVDT tracing to:
940 **                      0xff-returns the current setting.
941 **                      0-turns off tracing.
942 **                      >= 1-Errors.
943 **                      >= 2-Warnings.
944 **                      >= 3-APIs.
945 **                      >= 4-Events.
946 **                      >= 5-Debug.
947 **
948 ** Returns          The new trace level or current trace level if
949 **                  the input parameter is 0xff.
950 **
951 ******************************************************************************/
952 extern UINT8 AVDT_SetTraceLevel (UINT8 new_level);
953 
954 #ifdef __cplusplus
955 }
956 #endif
957 
958 
959 #endif /* AVDT_API_H */
960