Lines Matching refs:is

7 # Each byte of MAC address is represented in Hex format as XX
29 # Valid values are 0,1,2. If commented out, the default value is 0.
35 # Valid values are 0,1,2. If commented out, the default value is 0.
42 # Valid values are 0,1. If commented out, the default value is 0.
55 # Flag to allow STA send AddTspec even when ACM is Off
143 # These parameters are used only if gEnable2x2 is 0
150 #If set to 0, MCC is not allowed.
177 # Enable to check FW hash if secure FW feature is enabled. It's for defconfig
192 #Timer value is in seconds
221 # Example: fast scan period is passed from framework (default = 10 sec), then
239 # set in bitmaps are allowed in probe request, all others removed while device is unassociated
267 # 0 implies no periodic wake up from IMPS. Periodic wakeup is
268 # unnecessary if Idle Scan is disabled.
286 # when inactivity is detected in WLAN Driver.
287 # This feature is inactive when beaconing interfaces are active with
293 # When gRuntimePM is disabled gRuntimeAutoTime won't take effect.
294 # The Time is in msec.
295 # 100 is min, 10000 is max, 500 is default.
345 #Check if the AP to which we are roaming is better than current AP in terms of RSSI.
346 #Checking is disabled if set to Zero.Otherwise it will use this value as to how better
350 # If the RSSI of any available candidate is better than currently associated
395 # through ini parameter. Default value is 1
418 # Default value of gEnableWoW is 3.
453 # Enable support for Implicit Trigger of TDLS. That is, wlan driver shall
455 # and RSSI) is met and then will initiate teardown when teardown criteria
456 # (idle packet count and RSSI) is met.
461 # Enable TDLS External Control. That is, user space application has to
462 # first configure a peer MAC in wlan driver towards which TDLS is desired.
464 # TDLS criteria (throughput and RSSI threshold) is met and teardown TDLS
465 # when teardown criteria (idle packet count and RSSI) is met. However,
466 # device will accept TDLS connection if it is initiated from any other peer,
467 # even if that peer is not configured.
476 # TDLS off-channel operation will be invoked when there is only one
495 #For every 10 seconds DUT send Qos Null frame(i.e., Keep Alive frame if link is idle for last 10 se…
501 #Active clients: DUT send Qos Null frame for 10th seconds onwards if it is not success still we try…
505 #gGoLinkMonitorPeriod/ gApLinkMonitorPeriod is period where link is idle and it is period
511 #gGoKeepAlivePeriod/gApKeepAlivePeriod is time to spend to check whether frame are succeed to send …
512 #Hence total effective detection time is gGoLinkMonitorPeriod+ gGoKeepAlivePeriod/gApLinkMonitorPer…
535 # Default Country Code is 2 bytes, 3rd byte is optional indoor or out door.
549 #Auto Shutdown  Value in seconds. A value of 0 means Auto shutoff is disabled