Lines Matching refs:is

15 # 0 implies no periodic wake up from IMPS. Periodic wakeup is
16 # unnecessary if Idle Scan is disabled.
44 # Each byte of MAC address is represented in Hex format as XX
63 # Flag to allow STA send AddTspec even when ACM is Off
186 #Check if the AP to which we are roaming is better than current AP in terms of RSSI.
187 #Checking is disabled if set to Zero.Otherwise it will use this value as to how better
191 # If the RSSI of any available candidate is better than currently associated
203 # Default Country Code is 2 bytes, 3rd byte is optional indoor or out door.
225 #Auto Shutdown  Value in seconds. A value of 0 means Auto shutoff is disabled
248 # 0-9 are threshold code and 7 is recommended value from system if feature is to be enabled.
252 # The EDET threshold mapping is as follows in 3dB step:
268 …aving (in a noisy environment) at the cost of more range. The range impact is approximately #calcu…
315 #For every 10 seconds DUT send Qos Null frame(i.e., Keep Alive frame if link is idle for last 10 se…
321 #Active clients: DUT send Qos Null frame for 10th seconds onwards if it is not success still we try…
325 #gGoLinkMonitorPeriod/ gApLinkMonitorPeriod is period where link is idle and it is period
332 #gGoKeepAlivePeriod/gApKeepAlivePeriod is time to spend to check whether frame are succeed to send …
333 #Hence total effective detection time is gGoLinkMonitorPeriod+ gGoKeepAlivePeriod/gApLinkMonitorPer…
368 # Valid values are 0,1,2. If commented out, the default value is 0.
374 # Valid values are 0,1,2. If commented out, the default value is 0.
384 # Valid values are 0,1. If commented out, the default value is 0.
389 # These parameters are used only if gEnable2x2 is 0
402 #If set to 0, MCC is not allowed.
421 #Timer value is in seconds
455 #Default is set to 0 (disable)
497 # Default value of gEnableWoW is 3.
530 # through ini parameter. Default value is 1
564 # Example: fast scan period is passed from framework (default = 10 sec), then
591 # help if the lifetime in RA is less than 3*60=3min. Then
592 # we need to change it, though it is uncommon.
605 # Enable support for Implicit Trigger of TDLS. That is, wlan driver shall
607 # and RSSI) is met and then will initiate teardown when teardown criteria
608 # (idle packet count and RSSI) is met.
613 # Enable TDLS External Control. That is, user space application has to
614 # first configure a peer MAC in wlan driver towards which TDLS is desired.
616 # TDLS criteria (throughput and RSSI threshold) is met and teardown TDLS
617 # when teardown criteria (idle packet count and RSSI) is met. However,
618 # device will accept TDLS connection if it is initiated from any other peer,
619 # even if that peer is not configured.
628 # TDLS off-channel operation will be invoked when there is only one
647 # when inactivity is detected in WLAN Driver.
648 # This feature is inactive when beaconing interfaces are active with
654 # When gRuntimePM is disabled gRuntimeAutoTime won't take effect.
655 # The Time is in msec.
656 # 100 is min, 10000 is max, 500 is default.
660 # Enable to check FW hash if secure FW feature is enabled. It's for defconfig
689 # set in bitmaps are allowed in probe request, all others removed while device is unassociated