Lines Matching refs:UINT8
81 UINT8 SD_SPEC: 4; // SD Memory Card - Spec. Version [59:56]
82 UINT8 SCR_STRUCTURE: 4; // SCR Structure [63:60]
83 UINT8 SD_BUS_WIDTHS: 4; // DAT Bus widths supported [51:48]
84 UINT8 DATA_STAT_AFTER_ERASE: 1; // Data Status after erases [55]
85 UINT8 SD_SECURITY: 3; // CPRM Security Support [54:52]
86 UINT8 EX_SECURITY_1: 1; // Extended Security Support [43]
87 UINT8 SD_SPEC4: 1; // Spec. Version 4.00 or higher [42]
88 UINT8 RESERVED_1: 2; // Reserved [41:40]
89 UINT8 SD_SPEC3: 1; // Spec. Version 3.00 or higher [47]
90 UINT8 EX_SECURITY_2: 3; // Extended Security Support [46:44]
91 UINT8 CMD_SUPPORT: 4; // Command Support bits [35:32]
92 UINT8 RESERVED_2: 4; // Reserved [39:36]
102 UINT8 PRV; // Product revision [63:56]
103 UINT8 PNM[5]; // Product name [64:103]
105 UINT8 MID; // Manufacturer ID [127:120]
109 UINT8 NOT_USED: 1; // Not used, always 1 [0:0]
110 UINT8 CRC: 7; // CRC [7:1]
112 UINT8 RESERVED_1: 2; // Reserved [9:8]
113 UINT8 FILE_FORMAT: 2; // File format [11:10]
114 UINT8 TMP_WRITE_PROTECT: 1; // Temporary write protection [12:12]
115 UINT8 PERM_WRITE_PROTECT: 1; // Permanent write protection [13:13]
116 UINT8 COPY: 1; // Copy flag (OTP) [14:14]
117 UINT8 FILE_FORMAT_GRP: 1; // File format group [15:15]
145 UINT8 TRAN_SPEED ; // Max. bus clock frequency [103:96]
146 UINT8 NSAC ; // Data read access-time 2 in CLK cycles (NSAC*100) [111:104]
147 UINT8 TAAC ; // Data read access-time 1 [119:112]
149 UINT8 RESERVED_5: 2; // Reserved [121:120]
150 UINT8 SPEC_VERS: 4; // System specification version [125:122]
151 UINT8 CSD_STRUCTURE: 2; // CSD structure [127:126]
155 UINT8 RESERVED_1[16]; // Reserved [15:0]
156 UINT8 SECURE_REMOVAL_TYPE; // Secure Removal Type [16:16]
157 UINT8 PRODUCT_STATE_AWARENESS_ENABLEMENT; // Product state awareness enablement [17:17]
158 UINT8 MAX_PRE_LOADING_DATA_SIZE[4]; // MAX pre loading data size [21:18]
159 UINT8 PRE_LOADING_DATA_SIZE[4]; // Pre loading data size [25:22]
160 UINT8 FFU_STATUS; // FFU Status [26:26]
161 UINT8 RESERVED_2[2]; // Reserved [28:27]
162 UINT8 MODE_OPERATION_CODES; // Mode operation codes [29:29]
163 UINT8 MODE_CONFIG; // Mode config [30:30]
164 UINT8 RESERVED_3; // Reserved [31:31]
165 UINT8 FLUSH_CACHE; // Flushing of the cache [32:32]
166 UINT8 CACHE_CTRL; // Control to turn the cache ON/OFF [33:33]
167 UINT8 POWER_OFF_NOTIFICATION; // Power Off Notification [34:34]
168 UINT8 PACKED_FAILURE_INDEX; // Packed command failure index [35:35]
169 UINT8 PACKED_COMMAND_STATUS; // Packed command status [36:36]
170 UINT8 CONTEXT_CONF[15]; // Context configuration [51:37]
171 UINT8 EXT_PARTITIONS_ATTRIBUTE[2]; // Extended partitions attribute [53:52]
172 UINT8 EXCEPTION_EVENTS_STATUS[2]; // Exception events status [55:54]
173 UINT8 EXCEPTION_EVENTS_CTRL[2]; // Exception events control [57:56]
174 UINT8 DYNCAP_NEEDED; // Number of addressed group to be released [58:58]
175 UINT8 CLASS_6_CTRL; // Class 6 commands control [59:59]
176 …UINT8 INI_TIMEOUT_EMU; // 1st initialization after disabling sector size emul…
177 UINT8 DATA_SECTOR_SIZE; // Sector size [61:61]
178 UINT8 USE_NATIVE_SECTOR; // Sector size emulation [62:62]
179 UINT8 NATIVE_SECTOR_SIZE; // Native sector size [63:63]
180 UINT8 VENDOR_SPECIFIC_FIELD[64]; // Vendor specific fields [127:64]
181 UINT8 RESERVED_4[2]; // Reserved [129:128]
182 UINT8 PROGRAM_CID_CSD_DDR_SUPPORT; // Program CID/CSD in DDR mode support [130:130]
183 UINT8 PERIODIC_WAKEUP; // Periodic wake-up [131:131]
184 UINT8 TCASE_SUPPORT; // Package case temperature is controlled [132:132]
185 UINT8 PRODUCTION_STATE_AWARENESS; // Production state awareness [133:133]
186 UINT8 SEC_BAD_BLK_MGMNT; // Bad block management mode [134:134]
187 UINT8 RESERVED_5; // Reserved [135:135]
188 UINT8 ENH_START_ADDR[4]; // Enhanced user data start address [139:136]
189 UINT8 ENH_SIZE_MULT[3]; // Enhanced user data area size [142:140]
190 UINT8 GP_SIZE_MULT[12]; // General purpose partition size [154:143]
191 UINT8 PARTITION_SETTING_COMPLETED; // Partitioning setting [155:155]
192 UINT8 PARTITIONS_ATTRIBUTE; // Partitions attribute [156:156]
193 UINT8 MAX_ENH_SIZE_MULT[3]; // Max enhanced area size [159:157]
194 UINT8 PARTITIONING_SUPPORT; // Partitioning [160:160]
195 UINT8 HPI_MGMT; // HPI management [161:161]
196 UINT8 RST_N_FUNCTION; // H/W reset function [162:162]
197 UINT8 BKOPS_EN; // Enable background operations handshake [163:163]
198 UINT8 BKOPS_START; // Manually start background operations [164:164]
199 UINT8 SANITIZE_START; // Start sanitize operation [165:165]
200 UINT8 WR_REL_PARAM; // Write reliability parameter register [166:166]
201 UINT8 WR_REL_SET; // Write reliability setting register [167:167]
202 UINT8 RPMB_SIZE_MULT; // RPMB size [168:168]
203 UINT8 FW_CONFIG; // FW configuration [169:169]
204 UINT8 RESERVED_6; // Reserved [170:170]
205 UINT8 USER_WP; // User area write protection register [171:171]
206 UINT8 RESERVED_7; // Reserved [172:172]
207 UINT8 BOOT_WP; // Boot area write protection register [173:173]
208 UINT8 BOOT_WP_STATUS; // Boot write protection register [174:174]
209 UINT8 ERASE_GROUP_DEF; // High-density erase group definition [175:175]
210 UINT8 RESERVED_8; // Reserved [176:176]
211 UINT8 BOOT_BUS_CONDITIONS; // Boot bus conditions [177:177]
212 UINT8 BOOT_CONFIG_PROT; // Boot config protection [178:178]
213 UINT8 PARTITION_CONFIG; // Partition config [179:179]
214 UINT8 RESERVED_9; // Reserved [180:180]
215 UINT8 ERASED_MEM_CONT; // Erased memory content [181:181]
216 UINT8 RESERVED_10; // Reserved [182:182]
217 UINT8 BUS_WIDTH; // Bus width mode [183:183]
218 UINT8 RESERVED_11; // Reserved [184:184]
219 UINT8 HS_TIMING; // High-speed interface timing [185:185]
220 UINT8 RESERVED_12; // Reserved [186:186]
221 UINT8 POWER_CLASS; // Power class [187:187]
222 UINT8 RESERVED_13; // Reserved [188:188]
223 UINT8 CMD_SET_REV; // Command set revision [189:189]
224 UINT8 RESERVED_14; // Reserved [190:190]
225 UINT8 CMD_SET; // Command set [191:191]
226 UINT8 EXT_CSD_REV; // Extended CSD revision [192:192]
227 UINT8 RESERVED_15; // Reserved [193:193]
228 UINT8 CSD_STRUCTURE; // CSD Structure [194:194]
229 UINT8 RESERVED_16; // Reserved [195:195]
230 UINT8 DEVICE_TYPE; // Device type [196:196]
231 UINT8 DRIVER_STRENGTH; // I/O Driver strength [197:197]
232 UINT8 OUT_OF_INTERRUPT_TIME; // Out-of-interrupt busy timing [198:198]
233 UINT8 PARTITION_SWITCH_TIME; // Partition switching timing [199:199]
234 UINT8 PWR_CL_52_195; // Power class for 52MHz at 1.95V 1 R [200:200]
235 UINT8 PWR_CL_26_195; // Power class for 26MHz at 1.95V 1 R [201:201]
236 UINT8 PWR_CL_52_360; // Power class for 52MHz at 3.6V 1 R [202:202]
237 UINT8 PWR_CL_26_360; // Power class for 26MHz at 3.6V 1 R [203:203]
238 UINT8 RESERVED_17; // Reserved [204:204]
239 …UINT8 MIN_PERF_R_4_26; // Minimum read performance for 4bit at 26MHz [205:205]
240 …UINT8 MIN_PERF_W_4_26; // Minimum write performance for 4bit at 26MHz [206:20…
241 …UINT8 MIN_PERF_R_8_26_4_52; // Minimum read performance for 8bit at 26MHz, for 4bi…
242 …UINT8 MIN_PERF_W_8_26_4_52; // Minimum write performance for 8bit at 26MHz, for 4b…
243 …UINT8 MIN_PERF_R_8_52; // Minimum read performance for 8bit at 52MHz [209:209]
244 …UINT8 MIN_PERF_W_8_52; // Minimum write performance for 8bit at 52MHz [210:21…
245 UINT8 RESERVED_18; // Reserved [211:211]
247 UINT8 SLEEP_NOTIFICATION_TIME; // Sleep notification timout [216:216]
248 UINT8 S_A_TIMEOUT; // Sleep/awake timeout [217:217]
249 UINT8 PRODUCTION_STATE_AWARENESS_TIMEOUT; // Production state awareness timeout [218:218]
250 UINT8 S_C_VCCQ; // Sleep current (VCCQ) [219:219]
251 UINT8 S_C_VCC; // Sleep current (VCC) [220:220]
252 UINT8 HC_WP_GRP_SIZE; // High-capacity write protect group size [221:221]
253 UINT8 REL_WR_SEC_C; // Reliable write sector count [222:222]
254 UINT8 ERASE_TIMEOUT_MULT; // High-capacity erase timeout [223:223]
255 UINT8 HC_ERASE_GRP_SIZE; // High-capacity erase unit size [224:224]
256 UINT8 ACC_SIZE; // Access size [225:225]
257 UINT8 BOOT_SIZE_MULTI; // Boot partition size [226:226]
258 UINT8 RESERVED_19; // Reserved [227:227]
259 UINT8 BOOT_INFO; // Boot information [228:228]
260 UINT8 SEC_TRIM_MULT; // Secure TRIM Multiplier [229:229]
261 UINT8 SEC_ERASE_MULT; // Secure Erase Multiplier [230:230]
262 UINT8 SEC_FEATURE_SUPPORT; // Secure Feature Support [231:231]
263 UINT8 TRIM_MULT; // TRIM Multiplier [232:232]
264 UINT8 RESERVED_20; // Reserved [233:233]
265 …UINT8 MIN_PREF_DDR_R_8_52; // Minimum read performance for 8bit at 52MHz in DDR m…
266 …UINT8 MIN_PREF_DDR_W_8_52; // Minimum write performance for 8bit at 52MHz in DDR …
267 …UINT8 PWR_CL_200_130; // Power class for 200MHz at VCCQ=1.3V, VCC=3.6V [236:…
268 …UINT8 PWR_CL_200_195; // Power class for 200MHz at VCCQ=1.95V, VCC=3.6V [237…
269 UINT8 PWR_CL_DDR_52_195; // Power class for 52MHz, DDR at 1.95V [238:238]
270 UINT8 PWR_CL_DDR_52_360; // Power class for 52Mhz, DDR at 3.6V [239:239]
271 UINT8 RESERVED_21; // Reserved [240:240]
272 …UINT8 INI_TIMEOUT_AP; // 1st initialization time after partitioning [241:241]
273 UINT8 CORRECTLY_PRG_SECTORS_NUM[4]; // Number of correctly programmed sectors [245:242]
274 UINT8 BKOPS_STATUS; // Background operations status [246:246]
275 UINT8 POWER_OFF_LONG_TIME; // Power off notification (long) timeout [247:247]
276 UINT8 GENERIC_CMD6_TIME; // Generic CMD6 timeout [248:248]
277 UINT8 CACHE_SIZE[4]; // Cache size [252:249]
278 UINT8 PWR_CL_DDR_200_360; // Power class for 200MHz, DDR at VCC=3.6V [253:253]
279 UINT8 FIRMWARE_VERSION[8]; // Firmware version [261:254]
280 UINT8 DEVICE_VERSION[2]; // Device version [263:262]
281 UINT8 OPTIMAL_TRIM_UNIT_SIZE; // Optimal trim unit size [264:264]
282 UINT8 OPTIMAL_WRITE_SIZE; // Optimal write size [265:265]
283 UINT8 OPTIMAL_READ_SIZE; // Optimal read size [266:266]
284 UINT8 PRE_EOL_INFO; // Pre EOL information [267:267]
285 UINT8 DEVICE_LIFE_TIME_EST_TYP_A; // Device life time estimation type A [268:268]
286 UINT8 DEVICE_LIFE_TIME_EST_TYP_B; // Device life time estimation type B [269:269]
287 …UINT8 VENDOR_PROPRIETARY_HEALTH_REPORT[32]; // Vendor proprietary health report [301:270]
288 …UINT8 NUMBER_OF_FW_SECTORS_CORRECTLY_PROGRAMMED[4]; // Number of FW sectors correctly programmed…
289 UINT8 RESERVED_22[181]; // Reserved [486:306]
290 UINT8 FFU_ARG[4]; // FFU argument [490:487]
291 UINT8 OPERATION_CODE_TIMEOUT; // Operation codes timeout [491:491]
292 UINT8 FFU_FEATURES; // FFU features [492:492]
293 UINT8 SUPPORTED_MODES; // Supported modes [493:493]
294 UINT8 EXT_SUPPORT; // Extended partitions attribute support [494:494]
295 UINT8 LARGE_UNIT_SIZE_M1; // Large unit size [495:495]
296 UINT8 CONTEXT_CAPABILITIES; // Context management capabilities [496:496]
297 UINT8 TAG_RES_SIZE; // Tag resource size [497:497]
298 UINT8 TAG_UNIT_SIZE; // Tag unit size [498:498]
299 UINT8 DATA_TAG_SUPPORT; // Data tag support [499:499]
300 UINT8 MAX_PACKED_WRITES; // Max packed write commands [500:500]
301 UINT8 MAX_PACKED_READS; // Max packed read commands [501:501]
302 UINT8 BKOPS_SUPPORT; // Background operations support [502:502]
303 UINT8 HPI_FEATURES; // HPI features [503:503]
304 UINT8 S_CMD_SET; // Supported command sets [504:504]
305 UINT8 EXT_SECURITY_ERR; // Extended security commands error [505:505]
306 UINT8 RESERVED_23[6]; // Reserved [511:506]