Lines Matching refs:added
41 * added support for requesting and fetching arbitrary ANQP-elements
52 - added optional ssid=<hexdump> argument to P2P_CONNECT for join case
53 - added P2P_GROUP_MEMBER command to fetch client interface address
75 * added option to reopen debug log (e.g., to rotate the file) upon
77 * EAP-pwd: added support for Brainpool Elliptic Curves
84 * added 80+80 MHz and 160 MHz VHT support for IBSS/mesh
86 * added an option to abort an ongoing scan (used to speed up connection
105 * added support for multiple schedule scan plans (sched_scan_plans)
106 * added support for external server certificate chain validation
111 * added SIGNAL_MONITOR command to request signal strength monitoring
113 * added command for retrieving HS 2.0 icons with in-memory storage
120 * VHT: added interoperability workaround for 80+80 and 160 MHz channels
122 * added kqueue(2) support for eloop (CONFIG_ELOOP_KQUEUE)
129 * added initial MBO support; number of extensions to WNM BSS Transition
131 * added support for PBSS/PCP and P2P on 60 GHz
135 * added POLL_STA command to check connectivity in AP mode
136 * added initial functionality for location related operations
138 * added wps_disabled=1 network profile parameter to allow AP mode to
140 * wpa_cli: added action script support for AP-ENABLED and AP-DISABLED
160 - added VHT configuration for IBSS
163 * added AVG_BEACON_RSSI to SIGNAL_POLL output
164 * wpa_cli: added tab completion for number of commands
168 * added support for dynamically creating/removing a virtual interface
170 * added support for hashed password (NtHash) in EAP-pwd peer
171 * added support for memory-only PSK/passphrase (mem_only_psk=1 and
176 - added operating class 125 for P2P use cases (this allows 5 GHz
185 - added new signals: FindStopped, WPS pbc-overlap,
187 - added new methods: WPS Cancel, P2P Cancel, Reconnect, RemoveClient
188 - added manufacturer info
189 * added EAP-EKE peer support for deriving Session-Id
190 * added wps_priority configuration parameter to set the default priority
191 for all network profiles added by WPS
192 * added support to request a scan with specific SSIDs with the SCAN
198 * added support for Brainpool Elliptic Curves with SAE
199 * added support for CCMP-256 and GCMP-256 as group ciphers with FT
201 * added option to disable TLSv1.0 with OpenSSL
203 * added Fast Session Transfer (FST) module
207 * added RSN IE to Mesh Peering Open/Confirm frames
295 * added p2p_search_delay parameter to make the default p2p_find delay
303 * added TDLS workaround for some APs that may add extra data to the
306 * added configuration option (p2p_passphrase_len) to allow longer
316 * added optional scan_id parameter to the SCAN command to allow manual
319 * added option to set Hotspot 2.0 Rel 2 update_identifier in network
323 * added generic mechanism for adding vendor elements into frames at
325 * added fields to show unrecognized vendor elements in P2P_PEER
338 * added experimental support for using temporary, random local MAC
342 * added D-Bus interface for setting/clearing WFD IEs
354 * added DFS indicator to get_capability freq
355 * added/fixed nl80211 functionality
388 * added phase1 network parameter options for disabling TLS v1.1 and v1.2
391 * added support for OCSP stapling to validate AAA server certificate
394 - prefer the last added network in Interworking connection to make the
431 * added "reattach" command for fast reassociate-back-to-same-BSS
434 * added "get_capability tdls" command
435 * added option to set config blobs through control interface with
443 * added optional "freq=<channel ranges>" parameter to SET pno
444 * added optional "freq=<channel ranges>" parameter to SELECT_NETWORK
456 * added MACsec/IEEE Std 802.1X-2010 PAE implementation (currently
459 * added 'dup_network <id_s> <id_d> <name>' command; this can be used to
462 * added support for usin epoll in eloop (CONFIG_ELOOP_EPOLL=y)
474 * added support for simultaneous authentication of equals (SAE) for
490 * added support for optional per-device PSK assignment by P2P GO
492 * added P2P_REMOVE_CLIENT for removing a client from P2P groups
495 * added more configuration flexibility for allowed P2P GO/client
497 * added nl80211 functionality
505 * added more TDLS peer parameters to be configured to the driver
511 * added 'SCAN TYPE=ONLY' ctrl_iface command to request manual scan
513 * added Session-Id derivation for EAP peer methods
514 * added fully automated regression testing with mac80211_hwsim
524 * added global freq_list configuration to allow scan frequencies to be
526 * added support for BSS Transition Management
527 * added option to use "IFNAME=<ifname> " prefix to use the global
533 * added support for using OCSP stapling to validate server certificate
535 * added EAP-EKE peer
536 * added peer restart detection for IBSS RSN
537 * added domain_suffix_match (and domain_suffix_match2 for Phase 2
540 * added support for external SIM/USIM processing in EAP-SIM, EAP-AKA,
543 * added global bgscan configuration option as a default for all network
545 * added D-Bus methods for TDLS
546 * added more control to scan requests
562 * added a new cred block parameter 'temporary' to allow credential
565 * added "radio work" framework to schedule exclusive radio operations
571 * added support for using Protected Dual of Public Action frames for
573 * added support for WPS+NFC updates and P2P+NFC
600 - added optional delay=<search delay in milliseconds> parameter for
606 * added number of small changes to make it easier for static analyzers
615 - added support for fragmentation
619 * added "GET country" ctrl_iface command
624 * added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
625 * added "SET pno <1/0>" ctrl_iface command to start/stop preferred
631 * added "wpa_cli status wps" command to fetch WPA2-Personal passhrase
639 * added optional "join" argument for p2p_prov_disc ctrl_iface command
640 * added group ifname to P2P-PROV-DISC-* events
641 * added P2P Device Address to AP-STA-DISCONNECTED event and use
643 * added workarounds for WPS PBC overlap detection for some P2P use cases
653 * added more WPS and P2P information available through D-Bus
661 * added support for libnl 3.2 and newer
662 * added P2P persistent group info to P2P_PEER data
665 * added optional dev_id parameter for p2p_find
666 * added P2P-FIND-STOPPED ctrl_iface event
672 * AP: added a WPS workaround for mixed mode AP Settings with Windows 7
680 * added support for WFA Hotspot 2.0
690 * added option to fetch BSS table entry based on P2P Device Address
692 * added BSS entry age to ctrl_iface BSS command output
693 * added optional MASK=0xH option for ctrl_iface BSS command to select
695 * added optional RANGE=ALL|N1-N2 option for ctrl_iface BSS command to
699 * added "P2P_SET disallow_freq <freq list>" ctrl_iface command to
701 * added p2p_pref_chan configuration parameter to allow preferred P2P
703 * added support for advertising immediate availability of a WPS
710 * added support for sending debug info to Linux tracing (-T on command
712 * added support for using Deauthentication reason code 3 as an
714 * added wps_vendor_ext_m1 configuration parameter to allow vendor
715 specific attributes to be added to WPS M1
719 * added optional "auto" parameter for p2p_connect to request automatic
721 * added disabled_scan_offload parameter to disable automatic scan
723 * added optional persistent=<network id> parameter for p2p_connect to
725 * added support for OBSS scan requests and 20/40 BSS coexistence reports
729 * added initial support for WNM operations
733 * added autoscan module to control scanning behavior while not connected
735 * added new WPS NFC ctrl_iface mechanism
736 - added initial support NFC connection handover
739 * added optional framework for external password storage ("ext:<name>")
740 * wpa_cli: added optional support for controlling wpa_supplicant
747 * added optional "ht40" argument for P2P ctrl_iface commands to allow
749 * added optional parameters for p2p_invite command to specify channel
763 * added mechanism to disable TLS Session Ticket extension
773 * added support for configuring GCMP cipher for IEEE 802.11ad
774 * added support for Wi-Fi Display extensions
784 * added support for 256-bit AES with internal TLS implementation
787 * added disallow_aps parameter to allow BSSIDs/SSIDs to be disallowed
791 * added secondary device types into P2P_PEER output
792 * added an option to disable use of a separate P2P group interface
802 * added okc=1 global configuration parameter to allow OKC to be enabled
804 * added a workaround for WPS PBC session overlap detection to avoid
807 * added basic support for 60 GHz band
848 - P2P DBus API added.
878 - Many P2P commands were added. See README-P2P.
962 * Interworking: Support added for 802.11u. Enable in .config with
964 for interworking. wpa_cli commands added to support this are
994 * bsd: Cleaned up driver wrapper and added various low-level
1002 * wpa_cli: added option for using a separate process to receive event
1040 * nl80211: added support for IBSS networks
1041 * added internal debugging mechanism with backtrace support and memory
1043 * added WPS ER unsubscription command to more cleanly unregister from
1047 * added BSS table to maintain more complete scan result information
1063 * added support for multiple SSIDs per scan request to optimize
1067 * added support for WPS USBA out-of-band mechanism with USB Flash
1073 * added better support for drivers that allow separate authentication
1081 * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
1085 * wpa_gui-qt4: added new Peers dialog to show information about peers
1087 * added support for WPS External Registrar functionality (configure APs
1096 * fixed number of small WPS issues and added workarounds to
1098 * added support for NFC out-of-band mechanism with WPS
1101 * added preliminary support for IEEE 802.11r RIC processing
1102 * added support for specifying subset of enabled frequencies to scan
1107 * added a workaround for race condition between receiving the
1109 * added background scan and roaming infrastructure to allow
1112 * added new DBus interface (fi.w1.wpa_supplicant1)
1115 * added support for Wi-Fi Protected Setup (WPS)
1124 * added support for EAP-AKA' (draft-arkko-eap-aka-kdf)
1125 * added support for using driver_test over UDP socket
1130 * added a Windows installer that includes WinPcap and all the needed
1137 * added Milenage SIM/USIM emulator for EAP-SIM/EAP-AKA
1141 * added a new network configuration option, wpa_ptk_rekey, that can be
1144 * added an optional mitigation mechanism for certain attacks against
1157 * added support (Linux only) for RoboSwitch chipsets (often found in
1164 * added support for SHA-256 as X.509 certificate digest when using the
1167 * added support for using SHA256-based stronger key derivation for WPA2
1171 * added support for configuring Phase 2 (inner/tunneled) authentication
1175 * added support for EAP Sequences in EAP-FAST Phase 2
1176 * added support for using TNC with EAP-FAST
1177 * added driver_ps3 for the PS3 Linux wireless driver
1178 * added support for optional cryptobinding with PEAPv0
1181 * added fragmentation support for EAP-TNC
1182 * added support for parsing PKCS #8 formatted private keys into the
1185 * added option of using faster, but larger, routines in the internal
1201 * removed '-w' command line parameter (wait for interface to be added,
1204 when an interface is added
1206 * added ctrl_iface monitor event (CTRL-EVENT-SCAN-RESULTS) for
1208 * added new ctrl_iface command, BSS, to allow scan results to be
1218 * added support for Makefile builds to include debug-log-to-a-file
1222 * added data structure for storing allocated buffers (struct wpabuf);
1226 * added support for protecting EAP-AKA/Identity messages with
1228 * added support for protected result indication with AT_RESULT_IND for
1230 * added driver_wext workaround for race condition between scanning and
1240 * added support for privilege separation (run only minimal part of
1258 * added support for EAP-IKEv2 (draft-tschofenig-eap-ikev2-15.txt);
1262 * added support for configuring password as NtPasswordHash
1264 * added support for fallback from abbreviated TLS handshake to
1269 * added support for drivers that take care of RSN 4-way handshake
1272 * added an experimental port for Mac OS X (CONFIG_DRIVER_OSX=y in
1285 * added support for processing TNCC-TNCS-Messages to report
1289 * added network configuration parameter 'frequency' for setting
1291 * added experimental IEEE 802.11r/D6.0 support
1300 * added support for fragmentation of outer TLS packets during Phase 2
1303 * added support for EAP-FAST authentication with inner methods that
1306 * added support for authenticated EAP-FAST provisioning
1307 * added support for configuring maximum number of EAP-FAST PACs to
1309 * added support for storing EAP-FAST PACs in binary format
1315 added support for EAP-FAST
1324 * added support for EAP-TNC (Trusted Network Connect)
1330 * added experimental, integrated TLSv1 client implementation with the
1337 of it was already required; TLSv1/X.509/ASN.1/RSA added about 25 kB)
1342 * added preliminary implementation of IEEE 802.11w/D1.0 (management
1352 * added support for reading 3G USIM AID from EF_DIR to allow EAP-AKA to
1355 * added support for matching the subjectAltName of the authentication
1366 * added support for building Windows version with UNICODE defined
1371 * driver_ndis: added validation for IELength value in scan results to
1379 * added an alternative control interface backend for Windows targets:
1390 * added support for controlling more than one interface per process in
1392 * added a workaround for a case where the AP is using unknown address
1398 * added a workaround for UDP-based control interface (which was used in
1413 * winsvc: added support for configuring ctrl_interface parameters in
1423 * added support for doing MLME (IEEE 802.11 management frame
1426 * added a new network block configuration option, fragment_size, to
1432 * added an experimental TLSv1 client implementation
1438 * added PeerKey handshake implementation for IEEE 802.11e
1443 * added new configuration option for identifying which network block
1456 * added support for EAP Generalized Pre-Shared Key (EAP-GPSK,
1458 * added Microsoft Visual Studio 2005 solution and project files for
1462 at the end of RSN pre-authentication and added unregistration of
1465 * driver_ndis: added support for selecting AP based on BSSID
1466 * added new environmental variable for wpa_cli action scripts:
1468 * driver_ndis: added support for using NDISUIO instead of WinPcap for
1495 * config_winreg: added support for saving configuration data into
1497 * added support for controlling network device operational state
1501 * driver_wext: added support for WE-21 change to SSID configuration
1504 * added an optional driver_ops callback for MLME-SETPROTECTION.request
1506 * added support for EAP-SAKE (no EAP method number allocated yet, so
1508 * added support for dynamically loading EAP methods (.so files) instead
1518 * added support for generating EAP Expanded Nak
1522 * added support for receiving EAPOL frames from a Linux bridge
1532 * driver_wext: added fallback to use SIOCSIWENCODE for setting auth_alg
1536 * driver_test: added better support for multiple APs and STAs by using
1539 * added support for EAP expanded type (vendor specific EAP methods)
1540 * added AP_SCAN command into ctrl_iface so that ap_scan configuration
1561 * added experimental STAKey handshake implementation for IEEE 802.11e
1577 * added support for using Windows registry for command line parameters
1587 * added better support for multiple control interface backends
1594 * added new event loop implementation for Windows using
1598 * added support for selecting l2_packet implementation in .config
1601 * added new l2_packet implementation for WinPcap
1605 * added support for EAP-FAST key derivation using other ciphers than
1607 * added support for configuring CA certificate as DER file and as a
1609 * fixed private key configuration as configuration blob and added
1611 * tls_gnutls: added support for using PKCS#12 files; added support for
1613 * added support for loading trusted CA certificates from Windows
1616 * added C version of ndis_events.cpp and made it possible to build this
1619 * added wpasvc.exe into Windows binary release; this is an alternative
1646 * driver_madwifi: added support for madwifi-ng
1648 * wpa_gui: added CA certificate configuration
1658 * added support for named configuration blobs in order to avoid having
1667 * added ca_path (and ca_path2) configuration variables that can be used
1670 * added support for starting wpa_supplicant without a configuration
1675 * added global control interface that can be optionally used for adding
1681 - added WEP key configuration
1682 - added possibility to edit the current network configuration
1685 * added simple configuration file examples (in examples subdirectory)
1693 * added a workaround for clearing keys with ndiswrapper to allow
1695 * added docbook documentation (doc/docbook) that can be used to
1705 header is added only when transmitted the frame; this makes it easier
1715 * added support for multiple configuration backends (CONFIG_BACKEND
1718 * added support for updating configuration ('wpa_cli save_config');
1722 * added GET_NETWORK ctrl_iface command
1731 * added support for using Windows certificate store (through CryptoAPI)
1736 * added Qt4 version of wpa_gui (wpa_gui-qt4 directory); this can be
1741 * added support for enabling/disabling networks from the list of all
1744 * added support for adding and removing network from the current
1746 <network id>'); added networks are disabled by default and they can
1750 * added support for setting network configuration parameters through
1755 * added EAP workaround for PEAP session resumption: allow outer,
1761 * wpa_gui: added preliminary support for adding new networks to the
1778 * added support for using ap_scan=2 mode with multiple network blocks;
1785 * added support for matching alternative subject name extensions of the
1788 * driver_ndis: added support for IEEE 802.1X authentication with wired
1790 * added support for querying private key password (EAP-TLS) through the
1798 * added support for using password with EAP-PAX (as an alternative to
1801 * added support for arbitrary driver interface parameters through the
1804 * added possibility to override l2_packet module with driver interface
1809 * driver_test: added support for testing hostapd with wpa_supplicant
1817 * driver_madwifi: added preliminary support for compiling against 'BSD'
1819 * added support for EAP-MSCHAPv2 password retries within the same EAP
1821 * added support for password changes with EAP-MSCHAPv2 (used when the
1823 * added support for reading additional certificates from PKCS#12 files
1831 * added GUI version of wpa_cli, wpa_gui; this is not build
1834 * added 'disconnect' command to control interface for setting
1837 * added support for selecting a network from the list of all configured
1840 * added support for getting scan results through control interface
1841 * added EAP workaround for PEAPv1 session resumption: allow outer,
1846 * added a new build time option, CONFIG_NO_STDOUT_DEBUG, that can be
1852 * added support for wired authentication (IEEE 802.1X on wired
1862 * added support for sending TLS alerts
1863 * added support for 'any' SSID wildcard; if ssid is not configured or
1865 * added support for asking PIN (for SIM) from frontends (e.g.,
1869 * added support for using external devices (e.g., a smartcard) for
1874 * added experimental support for EAP-PAX
1875 * added monitor mode for wpa_cli (-a<path to a program to run>) that
1883 * added support for opportunistic WPA2 PMKSA key caching (disabled by
1888 * added -P<pid file> argument for wpa_supplicant to write the current
1892 * added new phase1 option parameter, include_tls_length=1, to force
1914 * added a workaround for an interoperability issue with a Cisco AP
1925 * added support for blacklisting APs that fail or timeout
1935 * added preliminary support for IBSS (ad-hoc) mode configuration
1943 * added preliminary port for native Windows (i.e., no cygwin) using
1947 * added optional support for GNU Readline and History Libraries for
1952 * added couple of workarounds for interoperability issues with a
1954 * added support for EAP-FAST (draft-cam-winget-eap-fast-00.txt);
1964 * added support for PMKSA caching with drivers that generate RSN IEs
1966 but similar code can be easily added to driver_ndiswrapper.c once
1970 * driver_ndis: added support for NDIS NdisMIncidateStatus() events
1974 * added support for driver interfaces to replace the interface name
1978 * added support for CR+LF (Windows-style) line ends in configuration
1987 * added support for driver events to add PMKID candidates in order to
1991 * added KEY_MGMT_802_1X_NO_WPA as a new key_mgmt type so that driver
1997 * driver_ndis: added legacy WPA capability detection for non-WPA2
1999 * added support for setting static WEP keys for IEEE 802.1X without
2003 * added support for reading PKCS#12 (PFX) files (as a replacement for
2006 * added new ap_scan mode, ap_scan=2, for drivers that take care of
2014 * added experimental port of wpa_supplicant for Windows
2022 * added auth_alg to driver interface associate() parameters to make it
2027 * driver_broadcom: added new driver interface for Broadcom wl.o driver
2034 * PEAPv1: added support for terminating PEAP authentication on tunneled
2043 * added support for EAP-PSK (draft-bersani-eap-psk-03.txt)
2045 * added support for configuring list of allowed Phase 2 EAP types
2047 * added support for configuring IEEE 802.11 authentication algorithm
2050 * added support for EAP-AKA (with UMTS SIM)
2053 * added support for EAP-SIM pseudonyms and fast re-authentication
2054 * added support for EAP-TLS/PEAP/TTLS fast re-authentication (TLS
2056 * added support for EAP-SIM with two challanges
2058 * added support for configuring DH/DSA parameters for an ephemeral DH
2062 * added support for matching subject of the authentication server
2070 * added driver interface for Intel ipw2100 driver
2071 * added support for LEAP with WPA
2072 * added support for larger scan results report (old limit was 4 kB of
2083 * added support for timestamping debug log messages (disabled by
2101 * added support for controlling multiple interfaces (radios) per
2105 * added a workaround for EAP servers that incorrectly use same Id for
2116 * added support for FreeBSD and driver interface for the BSD net80211
2131 * added a new driver interface, 'wext', which uses only standard,
2136 * added support for mode in which the driver is responsible for AP
2144 * added support for new EAP authentication methods:
2146 * added support for asking one-time-passwords from frontends (e.g.,
2170 * added support for LEAP
2171 * added driver interface for Linux ndiswrapper
2172 * added priority option for network blocks in the configuration file;
2186 * added support for madwifi driver (Atheros ar521x)
2187 * added a workaround for cases where AP sets Install Tx/Rx bit for
2191 * added GSM SIM/USIM interface for GSM authentication algorithm for
2193 * added support for ATMEL AT76C5XXx driver
2197 * added support for using plaintext and static WEP networks
2201 * added support for new EAP authentication methods:
2215 * added support for anonymous identity (to be used when identity is
2218 * added event messages from wpa_supplicant to frontends, e.g., wpa_cli
2219 * added support for requesting identity and password information using
2236 * added support for internal IEEE 802.1X (actually, IEEE 802.1aa/D6.1)
2257 * added support for non-WPA IEEE 802.1X mode with dynamic WEP keys
2260 * added support for IEEE 802.11i/RSN (WPA2)
2267 * added interface for external programs (frontends) to control