Lines Matching refs:zero

1961 “Reserved.” Bits in these spaces are reserved and shall be zero.
2171 decoration is present, a value of zero is not allowed for the size.
2422 a non-zero value was found in a reserved field of an attribute structure (TPMA_)
3270 shall be zero
3273 shall be zero
4374 Figure 2 shows the format for the response codes when bit 7 is zero.
4479 Reserved shall be zero.
4562 be zero.
5173 reserved bits not set to zero as required
6295 For this specification, the level is zero.
7111 larger than this, the TPM will return a zero length list and set the
7957 shall be zero
7981 shall be zero
8025 shall be zero
8051 shall be zero
8091 shall be zero
8272 If inSensitive.sensitive.data.size is zero, then this attribute shall be SET in the template;
8277 The inSensitive.sensitive.data.size parameter is required to be zero for an asymmetric key so
8282 The inSensitive.sensitive.data.size parameter may not be zero for a data object so sensitiveDataOri…
8839 If Extended is non-zero, then an extended locality is indicated and the TPMA_LOCALITY contains an
9048 shall be zero
9141 shall be zero
9168 For a command to the TPM, only the commandIndex field and V attribute are allowed to be non-zero.
9187 shall be zero
9234 allocated for software; shall be zero
9240 attribute. If V is zero, then the commandIndex shall be in the set of commands defined in a version…
9347 This field is reserved for system software. This field is required to be zero for a command to the …
9507 Typically, the 0 th PCR will have a handle value of zero.
10331 indicated number of octets, which may be zero.
10333 shall either be zero indicating that no structure is to be unmarshaled; or it shall be identical to…
10683 the Name is a handle. If size is zero, then no Name is present. Otherwise, the size shall be the si…
10707 PCR numbering starts at zero.
10722 is all zero bits, then no PCR is selected.
10918 shall be the Empty Buffer (a buffer with a size field of zero). This construct is the NULL Ticket. …
11588 A value of zero is allowed.
11614 A value of zero is allowed.
11637 A value of zero is allowed.
11671 A value of zero is allowed.
11692 A value of zero is allowed.
11822 This value is reset to zero when the Storage Primary Seed is
11850 TPM2_Clear() will set Clock to zero.
11857 This counter shall increment on each TPM Reset. This counter shall be reset to zero by TPM2_Clear().
11874 reset to zero on a TPM Reset or TPM2_Clear().
11883 TPMS_CLOCK_INFO.clock shall always be zero.
12740 zero
12808 If data.size is not zero, and the object is not a keyedHash, data.size must match the size indicate…
12859 size of sensitive in octets (may not be zero)
12867 may both be zero length but the minimum size of
13689 The value of zero is only valid for create.
13836 the type of point were BYTE, then size could have been zero. However, this would complicate the pro…
14030 cofactor (a size of zero indicates a cofactor of 1)
14605 exponent of zero. Support for other values is optional. Use of other exponents in duplicated keys i…
14610 key if exponent is not zero. The reference implementation allows the values listed in the table.
14656 When zero, indicates that the exponent is the default
15064 The authValue may be a zero-length string.
15500 shall be zero
15542 CLEAR (0): A write to this Index with a data size of zero does not
15608 shall be zero
16090 pcrDigest.size shall be zero if the pcrSelect list is empty.
16131 and never has a size of zero.