Lines Matching refs:zero

1961 “Reserved.” Bits in these spaces are reserved and shall be zero.
2171 decoration is present, a value of zero is not allowed for the size.
2422 a non-zero value was found in a reserved field of an attribute structure (TPMA_)
3264 shall be zero
3267 shall be zero
4368 Figure 2 shows the format for the response codes when bit 7 is zero.
4473 Reserved shall be zero.
4556 be zero.
5167 reserved bits not set to zero as required
6276 For this specification, the level is zero.
7136 larger than this, the TPM will return a zero length list and set the
7985 shall be zero
8009 shall be zero
8053 shall be zero
8079 shall be zero
8119 shall be zero
8300 If inSensitive.sensitive.data.size is zero, then this attribute shall be SET in the template;
8305 The inSensitive.sensitive.data.size parameter is required to be zero for an asymmetric key so
8310 The inSensitive.sensitive.data.size parameter may not be zero for a data object so sensitiveDataOri…
8867 If Extended is non-zero, then an extended locality is indicated and the TPMA_LOCALITY contains an
9076 shall be zero
9169 shall be zero
9196 For a command to the TPM, only the commandIndex field and V attribute are allowed to be non-zero.
9215 shall be zero
9262 allocated for software; shall be zero
9268 attribute. If V is zero, then the commandIndex shall be in the set of commands defined in a version…
9375 This field is reserved for system software. This field is required to be zero for a command to the …
9535 Typically, the 0 th PCR will have a handle value of zero.
10359 indicated number of octets, which may be zero.
10361 shall either be zero indicating that no structure is to be unmarshaled; or it shall be identical to…
10711 the Name is a handle. If size is zero, then no Name is present. Otherwise, the size shall be the si…
10735 PCR numbering starts at zero.
10750 is all zero bits, then no PCR is selected.
10946 shall be the Empty Buffer (a buffer with a size field of zero). This construct is the NULL Ticket. …
11620 A value of zero is allowed.
11646 A value of zero is allowed.
11669 A value of zero is allowed.
11705 A value of zero is allowed.
11728 A value of zero is allowed.
11858 This value is reset to zero when the Storage Primary Seed is
11886 TPM2_Clear() will set Clock to zero.
11893 This counter shall increment on each TPM Reset. This counter shall be reset to zero by TPM2_Clear().
11910 reset to zero on a TPM Reset or TPM2_Clear().
11919 TPMS_CLOCK_INFO.clock shall always be zero.
12752 zero
12820 If data.size is not zero, and the object is not a keyedHash, data.size must match the size indicate…
12871 size of sensitive in octets (may not be zero)
12879 may both be zero length but the minimum size of
13704 The value of zero is only valid for create.
13851 the type of point were BYTE, then size could have been zero. However, this would complicate the pro…
14045 cofactor (a size of zero indicates a cofactor of 1)
14616 exponent of zero. Support for other values is optional. Use of other exponents in duplicated keys i…
14621 key if exponent is not zero. The reference implementation allows the values listed in the table.
14655 When zero, indicates that the exponent is the default
15056 The authValue may be a zero-length string.
15489 shall be zero
15531 CLEAR (0): A write to this Index with a data size of zero does not
15597 shall be zero
16081 pcrDigest.size shall be zero if the pcrSelect list is empty.
16122 and never has a size of zero.