#include "wifi_hal.h" #ifndef __WIFI_HAL_LOGGER_H #define __WIFI_HAL_LOGGER_H #ifdef __cplusplus extern "C" { #endif /* __cplusplus */ #define LOGGER_MAJOR_VERSION 1 #define LOGGER_MINOR_VERSION 0 #define LOGGER_MICRO_VERSION 0 /** * WiFi logger life cycle is as follow: * * - At initialization time, framework will call wifi_get_ring_buffers_status * so as to obtain the names and list of supported buffers. * - When WiFi operation start framework will call wifi_start_logging * so as to trigger log collection. * - Developper UI will provide an option to the user, so as it can set the verbose level * of individual buffer as reported by wifi_get_ring_buffers_status. * - During wifi operations, driver will periodically report per ring data to framework * by invoking the on_ring_buffer_data call back. * - when capturing a bug report, framework will indicate to driver that all the data * has to be uploaded, urgently, by calling wifi_get_ring_data. * * The data uploaded by driver will be stored by framework in separate files, with one stream * of file per ring. * Framework will store the files in pcapng format, allowing for easy merging and parsing * with network analyzer tools. */ typedef int wifi_radio; typedef int wifi_ring_buffer_id; #define PER_PACKET_ENTRY_FLAGS_DIRECTION_TX 1 // 0: TX, 1: RX #define PER_PACKET_ENTRY_FLAGS_TX_SUCCESS 2 // whether packet was transmitted or // received/decrypted successfully #define PER_PACKET_ENTRY_FLAGS_80211_HEADER 4 // has full 802.11 header, else has 802.3 header #define PER_PACKET_ENTRY_FLAGS_PROTECTED 8 // whether packet was encrypted typedef struct { u8 flags; u8 tid; // transmit or received tid u16 MCS; // modulation and bandwidth u8 rssi; // TX: RSSI of ACK for that packet // RX: RSSI of packet u8 num_retries; // number of attempted retries u16 last_transmit_rate; // last transmit rate in .5 mbps u16 link_layer_transmit_sequence; // transmit/reeive sequence for that MPDU packet u64 firmware_entry_timestamp; // TX: firmware timestamp (us) when packet is queued within // firmware buffer for SDIO/HSIC or into PCIe buffer // RX: firmware receive timestamp u64 start_contention_timestamp; // firmware timestamp (us) when packet start contending for the // medium for the first time, at head of its AC queue, // or as part of an MPDU or A-MPDU. This timestamp is // not updated for each retry, only the first transmit attempt. u64 transmit_success_timestamp; // fimrware timestamp (us) when packet is successfully // transmitted or aborted because it has exhausted // its maximum number of retries. u8 data[0]; // packet data. The length of packet data is determined by the entry_size field of // the wifi_ring_buffer_entry structure. It is expected that first bytes of the // packet, or packet headers only (up to TCP or RTP/UDP headers) // will be copied into the ring } __attribute__((packed)) wifi_ring_per_packet_status_entry; /* Below events refer to the wifi_connectivity_event ring and shall be supported */ #define WIFI_EVENT_ASSOCIATION_REQUESTED 0 // driver receives association command from kernel #define WIFI_EVENT_AUTH_COMPLETE 1 #define WIFI_EVENT_ASSOC_COMPLETE 2 #define WIFI_EVENT_FW_AUTH_STARTED 3 // fw event indicating auth frames are sent #define WIFI_EVENT_FW_ASSOC_STARTED 4 // fw event indicating assoc frames are sent #define WIFI_EVENT_FW_RE_ASSOC_STARTED 5 // fw event indicating reassoc frames are sent #define WIFI_EVENT_DRIVER_SCAN_REQUESTED 6 #define WIFI_EVENT_DRIVER_SCAN_RESULT_FOUND 7 #define WIFI_EVENT_DRIVER_SCAN_COMPLETE 8 #define WIFI_EVENT_G_SCAN_STARTED 9 #define WIFI_EVENT_G_SCAN_COMPLETE 10 #define WIFI_EVENT_DISASSOCIATION_REQUESTED 11 #define WIFI_EVENT_RE_ASSOCIATION_REQUESTED 12 #define WIFI_EVENT_ROAM_REQUESTED 13 #define WIFI_EVENT_BEACON_RECEIVED 14 // received beacon from AP (event enabled // only in verbose mode) #define WIFI_EVENT_ROAM_SCAN_STARTED 15 // firmware has triggered a roam scan (not g-scan) #define WIFI_EVENT_ROAM_SCAN_COMPLETE 16 // firmware has completed a roam scan (not g-scan) #define WIFI_EVENT_ROAM_SEARCH_STARTED 17 // firmware has started searching for roam // candidates (with reason =xx) #define WIFI_EVENT_ROAM_SEARCH_STOPPED 18 // firmware has stopped searching for roam // candidates (with reason =xx) #define WIFI_EVENT_CHANNEL_SWITCH_ANOUNCEMENT 20 // received channel switch anouncement from AP #define WIFI_EVENT_FW_EAPOL_FRAME_TRANSMIT_START 21 // fw start transmit eapol frame, with // EAPOL index 1-4 #define WIFI_EVENT_FW_EAPOL_FRAME_TRANSMIT_STOP 22 // fw gives up eapol frame, with rate, // success/failure and number retries #define WIFI_EVENT_DRIVER_EAPOL_FRAME_TRANSMIT_REQUESTED 23 // kernel queue EAPOL for transmission // in driver with EAPOL index 1-4 #define WIFI_EVENT_FW_EAPOL_FRAME_RECEIVED 24 // with rate, regardless of the fact that // EAPOL frame is accepted or rejected by fw #define WIFI_EVENT_DRIVER_EAPOL_FRAME_RECEIVED 26 // with rate, and eapol index, driver has // received EAPOL frame and will queue it up // to wpa_supplicant #define WIFI_EVENT_BLOCK_ACK_NEGOTIATION_COMPLETE 27 // with success/failure, parameters #define WIFI_EVENT_BT_COEX_BT_SCO_START 28 #define WIFI_EVENT_BT_COEX_BT_SCO_STOP 29 #define WIFI_EVENT_BT_COEX_BT_SCAN_START 30 // for paging/scan etc., when BT starts transmiting // twice per BT slot #define WIFI_EVENT_BT_COEX_BT_SCAN_STOP 31 #define WIFI_EVENT_BT_COEX_BT_HID_START 32 #define WIFI_EVENT_BT_COEX_BT_HID_STOP 33 #define WIFI_EVENT_ROAM_AUTH_STARTED 34 // fw sends auth frame in roaming to next candidate #define WIFI_EVENT_ROAM_AUTH_COMPLETE 35 // fw receive auth confirm from ap #define WIFI_EVENT_ROAM_ASSOC_STARTED 36 // firmware sends assoc/reassoc frame in // roaming to next candidate #define WIFI_EVENT_ROAM_ASSOC_COMPLETE 37 // firmware receive assoc/reassoc confirm from ap #define WIFI_EVENT_G_SCAN_STOP 38 // firmware sends stop G_SCAN #define WIFI_EVENT_G_SCAN_CYCLE_STARTED 39 // firmware indicates G_SCAN scan cycle started #define WIFI_EVENT_G_SCAN_CYCLE_COMPLETED 40 // firmware indicates G_SCAN scan cycle completed #define WIFI_EVENT_G_SCAN_BUCKET_STARTED 41 // firmware indicates G_SCAN scan start // for a particular bucket #define WIFI_EVENT_G_SCAN_BUCKET_COMPLETED 42 // firmware indicates G_SCAN scan completed for // for a particular bucket #define WIFI_EVENT_G_SCAN_RESULTS_AVAILABLE 43 // Event received from firmware about G_SCAN scan // results being available #define WIFI_EVENT_G_SCAN_CAPABILITIES 44 // Event received from firmware with G_SCAN // capabilities #define WIFI_EVENT_ROAM_CANDIDATE_FOUND 45 // Event received from firmware when eligible // candidate is found #define WIFI_EVENT_ROAM_SCAN_CONFIG 46 // Event received from firmware when roam scan // configuration gets enabled or disabled #define WIFI_EVENT_AUTH_TIMEOUT 47 // firmware/driver timed out authentication #define WIFI_EVENT_ASSOC_TIMEOUT 48 // firmware/driver timed out association #define WIFI_EVENT_MEM_ALLOC_FAILURE 49 // firmware/driver encountered allocation failure #define WIFI_EVENT_DRIVER_PNO_ADD 50 // driver added a PNO network in firmware #define WIFI_EVENT_DRIVER_PNO_REMOVE 51 // driver removed a PNO network in firmware #define WIFI_EVENT_DRIVER_PNO_NETWORK_FOUND 52 // driver received PNO networks // found indication from firmware #define WIFI_EVENT_DRIVER_PNO_SCAN_REQUESTED 53 // driver triggered a scan for PNO networks #define WIFI_EVENT_DRIVER_PNO_SCAN_RESULT_FOUND 54 // driver received scan results // of PNO networks #define WIFI_EVENT_DRIVER_PNO_SCAN_COMPLETE 55 // driver updated scan results from // PNO networks to cfg80211 /** * Parameters of wifi logger events are TLVs * Event parameters tags are defined as: */ #define WIFI_TAG_VENDOR_SPECIFIC 0 // take a byte stream as parameter #define WIFI_TAG_BSSID 1 // takes a 6 bytes MAC address as parameter #define WIFI_TAG_ADDR 2 // takes a 6 bytes MAC address as parameter #define WIFI_TAG_SSID 3 // takes a 32 bytes SSID address as parameter #define WIFI_TAG_STATUS 4 // takes an integer as parameter #define WIFI_TAG_CHANNEL_SPEC 5 // takes one or more wifi_channel_spec as parameter #define WIFI_TAG_WAKE_LOCK_EVENT 6 // takes a wake_lock_event struct as parameter #define WIFI_TAG_ADDR1 7 // takes a 6 bytes MAC address as parameter #define WIFI_TAG_ADDR2 8 // takes a 6 bytes MAC address as parameter #define WIFI_TAG_ADDR3 9 // takes a 6 bytes MAC address as parameter #define WIFI_TAG_ADDR4 10 // takes a 6 bytes MAC address as parameter #define WIFI_TAG_TSF 11 // take a 64 bits TSF value as parameter #define WIFI_TAG_IE 12 // take one or more specific 802.11 IEs parameter, // IEs are in turn indicated in TLV format as per // 802.11 spec #define WIFI_TAG_INTERFACE 13 // take interface name as parameter #define WIFI_TAG_REASON_CODE 14 // take a reason code as per 802.11 as parameter #define WIFI_TAG_RATE_MBPS 15 // take a wifi rate in 0.5 mbps #define WIFI_TAG_REQUEST_ID 16 // take an integer as parameter #define WIFI_TAG_BUCKET_ID 17 // take an integer as parameter #define WIFI_TAG_GSCAN_PARAMS 18 // takes a wifi_scan_cmd_params struct as parameter #define WIFI_TAG_GSCAN_CAPABILITIES 19 // takes a wifi_gscan_capabilities struct as parameter #define WIFI_TAG_SCAN_ID 20 // take an integer as parameter #define WIFI_TAG_RSSI 21 // take an integer as parameter #define WIFI_TAG_CHANNEL 22 // take an integer as parameter #define WIFI_TAG_LINK_ID 23 // take an integer as parameter #define WIFI_TAG_LINK_ROLE 24 // take an integer as parameter #define WIFI_TAG_LINK_STATE 25 // take an integer as parameter #define WIFI_TAG_LINK_TYPE 26 // take an integer as parameter #define WIFI_TAG_TSCO 27 // take an integer as parameter #define WIFI_TAG_RSCO 28 // take an integer as parameter #define WIFI_TAG_EAPOL_MESSAGE_TYPE 29 // take an integer as parameter // M1-1, M2-2, M3-3, M4-4 typedef struct { u16 tag; u16 length; // length of value u8 value[0]; } __attribute__((packed)) tlv_log; typedef struct { u16 event; tlv_log tlvs[0]; // separate parameter structure per event to be provided and optional data // the event_data is expected to include an official android part, with some // parameter as transmit rate, num retries, num scan result found etc... // as well, event_data can include a vendor proprietary part which is // understood by the developer only. } __attribute__((packed)) wifi_ring_buffer_driver_connectivity_event; /** * Ring buffer name for power events ring. note that power event are extremely frequents * and thus should be stored in their own ring/file so as not to clobber connectivity events. */ typedef struct { int status; // 0 taken, 1 released int reason; // reason why this wake lock is taken char name[0]; // null terminated } __attribute__((packed)) wake_lock_event; typedef struct { u16 event; tlv_log tlvs[0]; } __attribute__((packed)) wifi_power_event; /** * This structure represent a logger entry within a ring buffer. * Wifi driver are responsible to manage the ring buffer and write the debug * information into those rings. * * In general, the debug entries can be used to store meaningful 802.11 information (SME, MLME, * connection and packet statistics) as well as vendor proprietary data that is specific to a * specific driver or chipset. * Binary entries can be used so as to store packet data or vendor specific information and * will be treated as blobs of data by android. * * A user land process will be started by framework so as to periodically retrieve the * data logged by drivers into their ring buffer, store the data into log files and include * the logs into android bugreports. */ enum { RING_BUFFER_ENTRY_FLAGS_HAS_BINARY = (1 << (0)), // set for binary entries RING_BUFFER_ENTRY_FLAGS_HAS_TIMESTAMP = (1 << (1)) // set if 64 bits timestamp is present }; enum { ENTRY_TYPE_CONNECT_EVENT = 1, ENTRY_TYPE_PKT, ENTRY_TYPE_WAKE_LOCK, ENTRY_TYPE_POWER_EVENT, ENTRY_TYPE_DATA }; typedef struct { u16 entry_size; // the size of payload excluding the header. u8 flags; u8 type; // entry type u64 timestamp; // present if has_timestamp bit is set. } __attribute__((packed)) wifi_ring_buffer_entry; #define WIFI_RING_BUFFER_FLAG_HAS_BINARY_ENTRIES 0x00000001 // set if binary entries are present #define WIFI_RING_BUFFER_FLAG_HAS_ASCII_ENTRIES 0x00000002 // set if ascii entries are present /* ring buffer params */ /** * written_bytes and read_bytes implement a producer consumer API * hence written_bytes >= read_bytes * a modulo arithmetic of the buffer size has to be applied to those counters: * actual offset into ring buffer = written_bytes % ring_buffer_byte_size * */ typedef struct { u8 name[32]; u32 flags; wifi_ring_buffer_id ring_id; // unique integer representing the ring u32 ring_buffer_byte_size; // total memory size allocated for the buffer u32 verbose_level; // verbose level for ring buffer u32 written_bytes; // number of bytes that was written to the buffer by driver, // monotonously increasing integer u32 read_bytes; // number of bytes that was read from the buffer by user land, // monotonously increasing integer u32 written_records; // number of records that was written to the buffer by driver, // monotonously increasing integer } wifi_ring_buffer_status; /** * Callback for reporting ring data * * The ring buffer data collection is event based: * - Driver calls on_ring_buffer_data when new records are available, the wifi_ring_buffer_status * passed up to framework in the call back indicates to framework if more data is available in * the ring buffer. It is not expected that driver will necessarily always empty the ring * immediately as data is available, instead driver will report data every X seconds or if * N bytes are available. * - In the case where a bug report has to be captured, framework will require driver to upload * all data immediately. This is indicated to driver when framework calls wifi_get_ringdata. * When framework calls wifi_get_ring_data, driver will start sending all available data in the * indicated ring by repeatedly invoking the on_ring_buffer_data callback. * * The callback is called by log handler whenever ring data comes in driver. */ typedef struct { void (*on_ring_buffer_data) (char *ring_name, char *buffer, int buffer_size, wifi_ring_buffer_status *status); } wifi_ring_buffer_data_handler; /** * API to set the log handler for getting ring data * - Only a single instance of log handler can be instantiated for each ring buffer. */ wifi_error wifi_set_log_handler(wifi_request_id id, wifi_interface_handle iface, wifi_ring_buffer_data_handler handler); /* API to reset the log handler */ wifi_error wifi_reset_log_handler(wifi_request_id id, wifi_interface_handle iface); /** * Callback for reporting FW dump * * The buffer data collection is event based such as FW health check or FW dump. * The callback is called by alert handler. */ typedef struct { void (*on_alert) (wifi_request_id id, char *buffer, int buffer_size, int err_code); } wifi_alert_handler; /* * API to set the alert handler for the alert case in Wi-Fi Chip * - Only a single instance of alert handler can be instantiated. */ wifi_error wifi_set_alert_handler(wifi_request_id id, wifi_interface_handle iface, wifi_alert_handler handler); /* API to reset the alert handler */ wifi_error wifi_reset_alert_handler(wifi_request_id id, wifi_interface_handle iface); /* API for framework to indicate driver has to upload and drain all data of a given ring */ wifi_error wifi_get_ring_data(wifi_interface_handle iface, char *ring_name); /** * API to trigger the debug collection. * Unless his API is invoked - logging is not triggered. * - Verbose_level 0 corresponds to no collection, * and it makes log handler stop by no more events from driver. * - Verbose_level 1 correspond to normal log level, with minimal user impact. * This is the default value. * - Verbose_level 2 are enabled when user is lazily trying to reproduce a problem, * wifi performances and power can be impacted but device should not otherwise be * significantly impacted. * - Verbose_level 3+ are used when trying to actively debug a problem. * * ring_name represent the name of the ring for which data collection shall start. * * flags: TBD parameter used to enable/disable specific events on a ring * max_interval: maximum interval in seconds for driver to invoke on_ring_buffer_data, * ignore if zero * min_data_size: minimum data size in buffer for driver to invoke on_ring_buffer_data, * ignore if zero */ wifi_error wifi_start_logging(wifi_interface_handle iface, u32 verbose_level, u32 flags, u32 max_interval_sec, u32 min_data_size, char *ring_name); /** * API to get the status of all ring buffers supported by driver. * - Caller is responsible to allocate / free ring buffer status. * - Maximum no of ring buffer would be 10. */ wifi_error wifi_get_ring_buffers_status(wifi_interface_handle iface, u32 *num_rings, wifi_ring_buffer_status *status); /** * Synchronous memory dump by user request. * - Caller is responsible to store memory dump data into a local, * e.g., /data/misc/wifi/memdump.bin */ typedef struct { void (*on_firmware_memory_dump) (char *buffer, int buffer_size); } wifi_firmware_memory_dump_handler; /** * API to collect a firmware memory dump for a given iface by async memdump event. * - Triggered by Alerthandler, esp. when FW problem or FW health check happens * - Caller is responsible to store fw dump data into a local, * e.g., /data/misc/wifi/alertdump-1.bin */ wifi_error wifi_get_firmware_memory_dump(wifi_interface_handle iface, wifi_firmware_memory_dump_handler handler); /** * API to collect a firmware version string. * - Caller is responsible to allocate / free a buffer to retrieve firmware verion info. * - Max string will be at most 256 bytes. */ wifi_error wifi_get_firmware_version(wifi_interface_handle iface, char *buffer, int buffer_size); /** * API to collect a driver version string. * - Caller is responsible to allocate / free a buffer to retrieve driver verion info. * - Max string will be at most 256 bytes. */ wifi_error wifi_get_driver_version(wifi_interface_handle iface, char *buffer, int buffer_size); /* Feature set */ enum { WIFI_LOGGER_MEMORY_DUMP_SUPPORTED = (1 << (0)), // Memory dump of FW WIFI_LOGGER_PER_PACKET_TX_RX_STATUS_SUPPORTED = (1 << (1)), // PKT status WIFI_LOGGER_CONNECT_EVENT_SUPPORTED = (1 << (2)), // Connectivity event WIFI_LOGGER_POWER_EVENT_SUPPORTED = (1 << (3)), // POWER of Driver WIFI_LOGGER_WAKE_LOCK_SUPPORTED = (1 << (4)), // WAKE LOCK of Driver WIFI_LOGGER_VERBOSE_SUPPORTED = (1 << (5)), // verbose log of FW WIFI_LOGGER_WATCHDOG_TIMER_SUPPORTED = (1 << (6)), // monitor the health of FW WIFI_LOGGER_DRIVER_DUMP_SUPPORTED = (1 << (7)), // dumps driver state WIFI_LOGGER_PACKET_FATE_SUPPORTED = (1 << (8)), // tracks connection packets' fate }; /** * API to retrieve the current supportive features. * - An integer variable is enough to have bit mapping info by caller. */ wifi_error wifi_get_logger_supported_feature_set(wifi_interface_handle iface, unsigned int *support); typedef struct { /* Buffer is to be allocated and freed by HAL implementation. */ void (*on_driver_memory_dump) (char *buffer, int buffer_size); } wifi_driver_memory_dump_callbacks; /** API to collect driver state. Framework will call this API soon before or after (but not concurrently with) wifi_get_firmware_memory_dump(). Capturing firmware and driver dumps is intended to help identify inconsistent state between these components. - In response to this call, HAL implementation should make one or more calls to callbacks.on_driver_memory_dump(). Framework will copy data out of the received |buffer|s, and concatenate the contents thereof. - HAL implemention will indicate completion of the driver memory dump by returning from this call. */ wifi_error wifi_get_driver_memory_dump( wifi_interface_handle iface, wifi_driver_memory_dump_callbacks callbacks); /* packet fate logs */ #define MD5_PREFIX_LEN 4 #define MAX_FATE_LOG_LEN 32 #define MAX_FRAME_LEN_ETHERNET 1518 #define MAX_FRAME_LEN_80211_MGMT 2352 // 802.11-2012 Fig. 8-34 typedef enum { // Sent over air and ACKed. TX_PKT_FATE_ACKED, // Sent over air but not ACKed. (Normal for broadcast/multicast.) TX_PKT_FATE_SENT, // Queued within firmware, but not yet sent over air. TX_PKT_FATE_FW_QUEUED, // Dropped by firmware as invalid. E.g. bad source address, bad checksum, // or invalid for current state. TX_PKT_FATE_FW_DROP_INVALID, // Dropped by firmware due to lack of buffer space. TX_PKT_FATE_FW_DROP_NOBUFS, // Dropped by firmware for any other reason. Includes frames that // were sent by driver to firmware, but unaccounted for by // firmware. TX_PKT_FATE_FW_DROP_OTHER, // Queued within driver, not yet sent to firmware. TX_PKT_FATE_DRV_QUEUED, // Dropped by driver as invalid. E.g. bad source address, or // invalid for current state. TX_PKT_FATE_DRV_DROP_INVALID, // Dropped by driver due to lack of buffer space. TX_PKT_FATE_DRV_DROP_NOBUFS, // Dropped by driver for any other reason. TX_PKT_FATE_DRV_DROP_OTHER, } wifi_tx_packet_fate; typedef enum { // Valid and delivered to network stack (e.g., netif_rx()). RX_PKT_FATE_SUCCESS, // Queued within firmware, but not yet sent to driver. RX_PKT_FATE_FW_QUEUED, // Dropped by firmware due to host-programmable filters. RX_PKT_FATE_FW_DROP_FILTER, // Dropped by firmware as invalid. E.g. bad checksum, decrypt failed, // or invalid for current state. RX_PKT_FATE_FW_DROP_INVALID, // Dropped by firmware due to lack of buffer space. RX_PKT_FATE_FW_DROP_NOBUFS, // Dropped by firmware for any other reason. RX_PKT_FATE_FW_DROP_OTHER, // Queued within driver, not yet delivered to network stack. RX_PKT_FATE_DRV_QUEUED, // Dropped by driver due to filter rules. RX_PKT_FATE_DRV_DROP_FILTER, // Dropped by driver as invalid. E.g. not permitted in current state. RX_PKT_FATE_DRV_DROP_INVALID, // Dropped by driver due to lack of buffer space. RX_PKT_FATE_DRV_DROP_NOBUFS, // Dropped by driver for any other reason. RX_PKT_FATE_DRV_DROP_OTHER, } wifi_rx_packet_fate; typedef enum { FRAME_TYPE_UNKNOWN, FRAME_TYPE_ETHERNET_II, FRAME_TYPE_80211_MGMT, } frame_type; typedef struct { // The type of MAC-layer frame that this frame_info holds. // - For data frames, use FRAME_TYPE_ETHERNET_II. // - For management frames, use FRAME_TYPE_80211_MGMT. // - If the type of the frame is unknown, use FRAME_TYPE_UNKNOWN. frame_type payload_type; // The number of bytes included in |frame_content|. If the frame // contents are missing (e.g. RX frame dropped in firmware), // |frame_len| should be set to 0. size_t frame_len; // Host clock when this frame was received by the driver (either // outbound from the host network stack, or inbound from the // firmware). // - The timestamp should be taken from a clock which includes time // the host spent suspended (e.g. ktime_get_boottime()). // - If no host timestamp is available (e.g. RX frame was dropped in // firmware), this field should be set to 0. u32 driver_timestamp_usec; // Firmware clock when this frame was received by the firmware // (either outbound from the host, or inbound from a remote // station). // - The timestamp should be taken from a clock which includes time // firmware spent suspended (if applicable). // - If no firmware timestamp is available (e.g. TX frame was // dropped by driver), this field should be set to 0. // - Consumers of |frame_info| should _not_ assume any // synchronization between driver and firmware clocks. u32 firmware_timestamp_usec; // Actual frame content. // - Should be provided for TX frames originated by the host. // - Should be provided for RX frames received by the driver. // - Optionally provided for TX frames originated by firmware. (At // discretion of HAL implementation.) // - Optionally provided for RX frames dropped in firmware. (At // discretion of HAL implementation.) // - If frame content is not provided, |frame_len| should be set // to 0. union { char ethernet_ii_bytes[MAX_FRAME_LEN_ETHERNET]; char ieee_80211_mgmt_bytes[MAX_FRAME_LEN_80211_MGMT]; } frame_content; } frame_info; typedef struct { // Prefix of MD5 hash of |frame_inf.frame_content|. If frame // content is not provided, prefix of MD5 hash over the same data // that would be in frame_content, if frame content were provided. char md5_prefix[MD5_PREFIX_LEN]; wifi_tx_packet_fate fate; frame_info frame_inf; } wifi_tx_report; typedef struct { // Prefix of MD5 hash of |frame_inf.frame_content|. If frame // content is not provided, prefix of MD5 hash over the same data // that would be in frame_content, if frame content were provided. char md5_prefix[MD5_PREFIX_LEN]; wifi_rx_packet_fate fate; frame_info frame_inf; } wifi_rx_report; /** API to start packet fate monitoring. - Once stared, monitoring should remain active until HAL is unloaded. - When HAL is unloaded, all packet fate buffers should be cleared. */ wifi_error wifi_start_pkt_fate_monitoring(wifi_interface_handle handle); /** API to retrieve fates of outbound packets. - HAL implementation should fill |tx_report_bufs| with fates of _first_ min(n_requested_fates, actual packets) frames transmitted for the most recent association. The fate reports should follow the same order as their respective packets. - HAL implementation may choose (but is not required) to include reports for management frames. - Packets reported by firmware, but not recognized by driver, should be included. However, the ordering of the corresponding reports is at the discretion of HAL implementation. - Framework may call this API multiple times for the same association. - Framework will ensure |n_requested_fates <= MAX_FATE_LOG_LEN|. - Framework will allocate and free the referenced storage. */ wifi_error wifi_get_tx_pkt_fates(wifi_interface_handle handle, wifi_tx_report *tx_report_bufs, size_t n_requested_fates, size_t *n_provided_fates); /** API to retrieve fates of inbound packets. - HAL implementation should fill |rx_report_bufs| with fates of _first_ min(n_requested_fates, actual packets) frames received for the most recent association. The fate reports should follow the same order as their respective packets. - HAL implementation may choose (but is not required) to include reports for management frames. - Packets reported by firmware, but not recognized by driver, should be included. However, the ordering of the corresponding reports is at the discretion of HAL implementation. - Framework may call this API multiple times for the same association. - Framework will ensure |n_requested_fates <= MAX_FATE_LOG_LEN|. - Framework will allocate and free the referenced storage. */ wifi_error wifi_get_rx_pkt_fates(wifi_interface_handle handle, wifi_rx_report *rx_report_bufs, size_t n_requested_fates, size_t *n_provided_fates); #ifdef __cplusplus } #endif /* __cplusplus */ #endif /*__WIFI_HAL_STATS_ */