/******************************************************************************
 *
 *  Copyright (C) 2003-2012 Broadcom Corporation
 *
 *  Licensed under the Apache License, Version 2.0 (the "License");
 *  you may not use this file except in compliance with the License.
 *  You may obtain a copy of the License at:
 *
 *  http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software
 *  distributed under the License is distributed on an "AS IS" BASIS,
 *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *  See the License for the specific language governing permissions and
 *  limitations under the License.
 *
 ******************************************************************************/

/******************************************************************************
 *
 *  Interface to AVRCP optional commands
 *
 ******************************************************************************/
#include <base/logging.h>
#include <string.h>

#include "avrc_api.h"
#include "avrc_int.h"
#include "bt_common.h"

/******************************************************************************
 *
 * Function         avrc_vendor_msg
 *
 * Description      Compose a VENDOR DEPENDENT command according to p_msg
 *
 *                  Input Parameters:
 *                      p_msg: Pointer to VENDOR DEPENDENT message structure.
 *
 *                  Output Parameters:
*                      None.
 *
 * Returns          pointer to a valid GKI buffer if successful.
 *                  NULL if p_msg is NULL.
 *
 *****************************************************************************/
static BT_HDR* avrc_vendor_msg(tAVRC_MSG_VENDOR* p_msg) {
  BT_HDR* p_cmd;
  uint8_t* p_data;

  CHECK(p_msg != NULL);

#if (AVRC_METADATA_INCLUDED == TRUE)
  CHECK(AVRC_META_CMD_BUF_SIZE > (AVRC_MIN_CMD_LEN + p_msg->vendor_len));
  p_cmd = (BT_HDR*)osi_malloc(AVRC_META_CMD_BUF_SIZE);
#else
  CHECK(AVRC_CMD_BUF_SIZE > (AVRC_MIN_CMD_LEN + p_msg->vendor_len));
  p_cmd = (BT_HDR*)osi_malloc(AVRC_CMD_BUF_SIZE);
#endif

  p_cmd->offset = AVCT_MSG_OFFSET;
  p_data = (uint8_t*)(p_cmd + 1) + p_cmd->offset;
  *p_data++ = (p_msg->hdr.ctype & AVRC_CTYPE_MASK);
  *p_data++ =
      (p_msg->hdr.subunit_type << AVRC_SUBTYPE_SHIFT) | p_msg->hdr.subunit_id;
  *p_data++ = AVRC_OP_VENDOR;
  AVRC_CO_ID_TO_BE_STREAM(p_data, p_msg->company_id);
  if (p_msg->vendor_len && p_msg->p_vendor_data)
    memcpy(p_data, p_msg->p_vendor_data, p_msg->vendor_len);
  p_cmd->len = (uint16_t)(p_data + p_msg->vendor_len - (uint8_t*)(p_cmd + 1) -
                          p_cmd->offset);
  p_cmd->layer_specific = AVCT_DATA_CTRL;

  return p_cmd;
}

/******************************************************************************
 *
 * Function         AVRC_UnitCmd
 *
 * Description      Send a UNIT INFO command to the peer device.  This
 *                  function can only be called for controller role connections.
 *                  Any response message from the peer is passed back through
 *                  the tAVRC_MSG_CBACK callback function.
 *
 *                  Input Parameters:
 *                      handle: Handle of this connection.
 *
 *                      label: Transaction label.
 *
 *                  Output Parameters:
 *                      None.
 *
 * Returns          AVRC_SUCCESS if successful.
 *                  AVRC_BAD_HANDLE if handle is invalid.
 *
 *****************************************************************************/
uint16_t AVRC_UnitCmd(uint8_t handle, uint8_t label) {
  BT_HDR* p_cmd = (BT_HDR*)osi_malloc(AVRC_CMD_BUF_SIZE);
  uint8_t* p_data;

  p_cmd->offset = AVCT_MSG_OFFSET;
  p_data = (uint8_t*)(p_cmd + 1) + p_cmd->offset;
  *p_data++ = AVRC_CMD_STATUS;
  /* unit & id ignore */
  *p_data++ = (AVRC_SUB_UNIT << AVRC_SUBTYPE_SHIFT) | AVRC_SUBID_IGNORE;
  *p_data++ = AVRC_OP_UNIT_INFO;
  memset(p_data, AVRC_CMD_OPRND_PAD, AVRC_UNIT_OPRND_BYTES);
  p_cmd->len =
      p_data + AVRC_UNIT_OPRND_BYTES - (uint8_t*)(p_cmd + 1) - p_cmd->offset;
  p_cmd->layer_specific = AVCT_DATA_CTRL;

  return AVCT_MsgReq(handle, label, AVCT_CMD, p_cmd);
}

/******************************************************************************
 *
 * Function         AVRC_SubCmd
 *
 * Description      Send a SUBUNIT INFO command to the peer device.  This
 *                  function can only be called for controller role connections.
 *                  Any response message from the peer is passed back through
 *                  the tAVRC_MSG_CBACK callback function.
 *
 *                  Input Parameters:
 *                      handle: Handle of this connection.
 *
 *                      label: Transaction label.
 *
 *                      page: Specifies which part of the subunit type table
 *                      is requested.  For AVRCP it is typically zero.
 *                      Value range is 0-7.
 *
 *                  Output Parameters:
 *                      None.
 *
 * Returns          AVRC_SUCCESS if successful.
 *                  AVRC_BAD_HANDLE if handle is invalid.
 *
 *****************************************************************************/
uint16_t AVRC_SubCmd(uint8_t handle, uint8_t label, uint8_t page) {
  BT_HDR* p_cmd = (BT_HDR*)osi_malloc(AVRC_CMD_BUF_SIZE);
  uint8_t* p_data;

  p_cmd->offset = AVCT_MSG_OFFSET;
  p_data = (uint8_t*)(p_cmd + 1) + p_cmd->offset;
  *p_data++ = AVRC_CMD_STATUS;
  /* unit & id ignore */
  *p_data++ = (AVRC_SUB_UNIT << AVRC_SUBTYPE_SHIFT) | AVRC_SUBID_IGNORE;
  *p_data++ = AVRC_OP_SUB_INFO;
  *p_data++ =
      ((page & AVRC_SUB_PAGE_MASK) << AVRC_SUB_PAGE_SHIFT) | AVRC_SUB_EXT_CODE;
  memset(p_data, AVRC_CMD_OPRND_PAD, AVRC_SUB_OPRND_BYTES);
  p_cmd->len =
      p_data + AVRC_SUB_OPRND_BYTES - (uint8_t*)(p_cmd + 1) - p_cmd->offset;
  p_cmd->layer_specific = AVCT_DATA_CTRL;

  return AVCT_MsgReq(handle, label, AVCT_CMD, p_cmd);
}

/******************************************************************************
 *
 * Function         AVRC_VendorCmd
 *
 * Description      Send a VENDOR DEPENDENT command to the peer device.  This
 *                  function can only be called for controller role connections.
 *                  Any response message from the peer is passed back through
 *                  the tAVRC_MSG_CBACK callback function.
 *
 *                  Input Parameters:
 *                      handle: Handle of this connection.
 *
 *                      label: Transaction label.
 *
 *                      p_msg: Pointer to VENDOR DEPENDENT message structure.
 *
 *                  Output Parameters:
 *                      None.
 *
 * Returns          AVRC_SUCCESS if successful.
 *                  AVRC_BAD_HANDLE if handle is invalid.
 *
 *****************************************************************************/
uint16_t AVRC_VendorCmd(uint8_t handle, uint8_t label,
                        tAVRC_MSG_VENDOR* p_msg) {
  BT_HDR* p_buf = avrc_vendor_msg(p_msg);
  if (p_buf)
    return AVCT_MsgReq(handle, label, AVCT_CMD, p_buf);
  else
    return AVCT_NO_RESOURCES;
}

/******************************************************************************
 *
 * Function         AVRC_VendorRsp
 *
 * Description      Send a VENDOR DEPENDENT response to the peer device.  This
 *                  function can only be called for target role connections.
 *                  This function must be called when a VENDOR DEPENDENT
 *                  command message is received from the peer through the
 *                  tAVRC_MSG_CBACK callback function.
 *
 *                  Input Parameters:
 *                      handle: Handle of this connection.
 *
 *                      label: Transaction label.  Must be the same value as
 *                      passed with the command message in the callback
 *                      function.
 *
 *                      p_msg: Pointer to VENDOR DEPENDENT message structure.
 *
 *                  Output Parameters:
 *                      None.
 *
 * Returns          AVRC_SUCCESS if successful.
 *                  AVRC_BAD_HANDLE if handle is invalid.
 *
 *****************************************************************************/
uint16_t AVRC_VendorRsp(uint8_t handle, uint8_t label,
                        tAVRC_MSG_VENDOR* p_msg) {
  BT_HDR* p_buf = avrc_vendor_msg(p_msg);
  if (p_buf)
    return AVCT_MsgReq(handle, label, AVCT_RSP, p_buf);
  else
    return AVCT_NO_RESOURCES;
}