1 /** @file 2 UEFI Multicast Trivial File Tranfer Protocol v6 Definition, which is built upon 3 the EFI UDPv6 Protocol and provides basic services for client-side unicast and/or 4 multicast TFTP operations. 5 6 Copyright (c) 2008 - 2011, Intel Corporation. All rights reserved.<BR> 7 This program and the accompanying materials 8 are licensed and made available under the terms and conditions of the BSD License 9 which accompanies this distribution. The full text of the license may be found at 10 http://opensource.org/licenses/bsd-license.php 11 12 THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, 13 WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. 14 15 @par Revision Reference: 16 This Protocol is introduced in UEFI Specification 2.2 17 18 **/ 19 20 #ifndef __EFI_MTFTP6_PROTOCOL_H__ 21 #define __EFI_MTFTP6_PROTOCOL_H__ 22 23 24 #define EFI_MTFTP6_SERVICE_BINDING_PROTOCOL_GUID \ 25 { \ 26 0xd9760ff3, 0x3cca, 0x4267, {0x80, 0xf9, 0x75, 0x27, 0xfa, 0xfa, 0x42, 0x23 } \ 27 } 28 29 #define EFI_MTFTP6_PROTOCOL_GUID \ 30 { \ 31 0xbf0a78ba, 0xec29, 0x49cf, {0xa1, 0xc9, 0x7a, 0xe5, 0x4e, 0xab, 0x6a, 0x51 } \ 32 } 33 34 typedef struct _EFI_MTFTP6_PROTOCOL EFI_MTFTP6_PROTOCOL; 35 typedef struct _EFI_MTFTP6_TOKEN EFI_MTFTP6_TOKEN; 36 37 /// 38 /// MTFTP Packet OpCodes 39 ///@{ 40 #define EFI_MTFTP6_OPCODE_RRQ 1 ///< The MTFTPv6 packet is a read request. 41 #define EFI_MTFTP6_OPCODE_WRQ 2 ///< The MTFTPv6 packet is a write request. 42 #define EFI_MTFTP6_OPCODE_DATA 3 ///< The MTFTPv6 packet is a data packet. 43 #define EFI_MTFTP6_OPCODE_ACK 4 ///< The MTFTPv6 packet is an acknowledgement packet. 44 #define EFI_MTFTP6_OPCODE_ERROR 5 ///< The MTFTPv6 packet is an error packet. 45 #define EFI_MTFTP6_OPCODE_OACK 6 ///< The MTFTPv6 packet is an option acknowledgement packet. 46 #define EFI_MTFTP6_OPCODE_DIR 7 ///< The MTFTPv6 packet is a directory query packet. 47 #define EFI_MTFTP6_OPCODE_DATA8 8 ///< The MTFTPv6 packet is a data packet with a big block number. 48 #define EFI_MTFTP6_OPCODE_ACK8 9 ///< The MTFTPv6 packet is an acknowledgement packet with a big block number. 49 ///@} 50 51 /// 52 /// MTFTP ERROR Packet ErrorCodes 53 ///@{ 54 /// 55 /// The error code is not defined. See the error message in the packet (if any) for details. 56 /// 57 #define EFI_MTFTP6_ERRORCODE_NOT_DEFINED 0 58 /// 59 /// The file was not found. 60 /// 61 #define EFI_MTFTP6_ERRORCODE_FILE_NOT_FOUND 1 62 /// 63 /// There was an access violation. 64 /// 65 #define EFI_MTFTP6_ERRORCODE_ACCESS_VIOLATION 2 66 /// 67 /// The disk was full or its allocation was exceeded. 68 /// 69 #define EFI_MTFTP6_ERRORCODE_DISK_FULL 3 70 /// 71 /// The MTFTPv6 operation was illegal. 72 /// 73 #define EFI_MTFTP6_ERRORCODE_ILLEGAL_OPERATION 6 74 /// 75 /// The transfer ID is unknown. 76 /// 77 #define EFI_MTFTP6_ERRORCODE_UNKNOWN_TRANSFER_ID 5 78 /// 79 /// The file already exists. 80 /// 81 #define EFI_MTFTP6_ERRORCODE_FILE_ALREADY_EXISTS 6 82 /// 83 /// There is no such user. 84 /// 85 #define EFI_MTFTP6_ERRORCODE_NO_SUCH_USER 7 86 /// 87 /// The request has been denied due to option negotiation. 88 /// 89 #define EFI_MTFTP6_ERRORCODE_REQUEST_DENIED 8 90 ///@} 91 92 #pragma pack(1) 93 94 /// 95 /// EFI_MTFTP6_REQ_HEADER 96 /// 97 typedef struct { 98 /// 99 /// For this packet type, OpCode = EFI_MTFTP6_OPCODE_RRQ for a read request 100 /// or OpCode = EFI_MTFTP6_OPCODE_WRQ for a write request. 101 /// 102 UINT16 OpCode; 103 /// 104 /// The file name to be downloaded or uploaded. 105 /// 106 UINT8 Filename[1]; 107 } EFI_MTFTP6_REQ_HEADER; 108 109 /// 110 /// EFI_MTFTP6_OACK_HEADER 111 /// 112 typedef struct { 113 /// 114 /// For this packet type, OpCode = EFI_MTFTP6_OPCODE_OACK. 115 /// 116 UINT16 OpCode; 117 /// 118 /// The option strings in the option acknowledgement packet. 119 /// 120 UINT8 Data[1]; 121 } EFI_MTFTP6_OACK_HEADER; 122 123 /// 124 /// EFI_MTFTP6_DATA_HEADER 125 /// 126 typedef struct { 127 /// 128 /// For this packet type, OpCode = EFI_MTFTP6_OPCODE_DATA. 129 /// 130 UINT16 OpCode; 131 /// 132 /// Block number of this data packet. 133 /// 134 UINT16 Block; 135 /// 136 /// The content of this data packet. 137 /// 138 UINT8 Data[1]; 139 } EFI_MTFTP6_DATA_HEADER; 140 141 /// 142 /// EFI_MTFTP6_ACK_HEADER 143 /// 144 typedef struct { 145 /// 146 /// For this packet type, OpCode = EFI_MTFTP6_OPCODE_ACK. 147 /// 148 UINT16 OpCode; 149 /// 150 /// The block number of the data packet that is being acknowledged. 151 /// 152 UINT16 Block[1]; 153 } EFI_MTFTP6_ACK_HEADER; 154 155 /// 156 /// EFI_MTFTP6_DATA8_HEADER 157 /// 158 typedef struct { 159 /// 160 /// For this packet type, OpCode = EFI_MTFTP6_OPCODE_DATA8. 161 /// 162 UINT16 OpCode; 163 /// 164 /// The block number of data packet. 165 /// 166 UINT64 Block; 167 /// 168 /// The content of this data packet. 169 /// 170 UINT8 Data[1]; 171 } EFI_MTFTP6_DATA8_HEADER; 172 173 /// 174 /// EFI_MTFTP6_ACK8_HEADER 175 /// 176 typedef struct { 177 /// 178 /// For this packet type, OpCode = EFI_MTFTP6_OPCODE_ACK8. 179 /// 180 UINT16 OpCode; 181 /// 182 /// The block number of the data packet that is being acknowledged. 183 /// 184 UINT64 Block[1]; 185 } EFI_MTFTP6_ACK8_HEADER; 186 187 /// 188 /// EFI_MTFTP6_ERROR_HEADER 189 /// 190 typedef struct { 191 /// 192 /// For this packet type, OpCode = EFI_MTFTP6_OPCODE_ERROR. 193 /// 194 UINT16 OpCode; 195 /// 196 /// The error number as defined by the MTFTPv6 packet error codes. 197 /// 198 UINT16 ErrorCode; 199 /// 200 /// Error message string. 201 /// 202 UINT8 ErrorMessage[1]; 203 } EFI_MTFTP6_ERROR_HEADER; 204 205 /// 206 /// EFI_MTFTP6_PACKET 207 /// 208 typedef union { 209 UINT16 OpCode; ///< Type of packets as defined by the MTFTPv6 packet opcodes. 210 EFI_MTFTP6_REQ_HEADER Rrq; ///< Read request packet header. 211 EFI_MTFTP6_REQ_HEADER Wrq; ///< write request packet header. 212 EFI_MTFTP6_OACK_HEADER Oack; ///< Option acknowledge packet header. 213 EFI_MTFTP6_DATA_HEADER Data; ///< Data packet header. 214 EFI_MTFTP6_ACK_HEADER Ack; ///< Acknowledgement packet header. 215 EFI_MTFTP6_DATA8_HEADER Data8; ///< Data packet header with big block number. 216 EFI_MTFTP6_ACK8_HEADER Ack8; ///< Acknowledgement header with big block number. 217 EFI_MTFTP6_ERROR_HEADER Error; ///< Error packet header. 218 } EFI_MTFTP6_PACKET; 219 220 #pragma pack() 221 222 /// 223 /// EFI_MTFTP6_CONFIG_DATA 224 /// 225 typedef struct { 226 /// 227 /// The local IP address to use. Set to zero to let the underlying IPv6 228 /// driver choose a source address. If not zero it must be one of the 229 /// configured IP addresses in the underlying IPv6 driver. 230 /// 231 EFI_IPv6_ADDRESS StationIp; 232 /// 233 /// Local port number. Set to zero to use the automatically assigned port number. 234 /// 235 UINT16 LocalPort; 236 /// 237 /// The IP address of the MTFTPv6 server. 238 /// 239 EFI_IPv6_ADDRESS ServerIp; 240 /// 241 /// The initial MTFTPv6 server port number. Request packets are 242 /// sent to this port. This number is almost always 69 and using zero 243 /// defaults to 69. 244 UINT16 InitialServerPort; 245 /// 246 /// The number of times to transmit MTFTPv6 request packets and wait for a response. 247 /// 248 UINT16 TryCount; 249 /// 250 /// The number of seconds to wait for a response after sending the MTFTPv6 request packet. 251 /// 252 UINT16 TimeoutValue; 253 } EFI_MTFTP6_CONFIG_DATA; 254 255 /// 256 /// EFI_MTFTP6_MODE_DATA 257 /// 258 typedef struct { 259 /// 260 /// The configuration data of this instance. 261 /// 262 EFI_MTFTP6_CONFIG_DATA ConfigData; 263 /// 264 /// The number of option strings in the following SupportedOptions array. 265 /// 266 UINT8 SupportedOptionCount; 267 /// 268 /// An array of null-terminated ASCII option strings that are recognized and supported by 269 /// this EFI MTFTPv6 Protocol driver implementation. The buffer is 270 /// read only to the caller and the caller should NOT free the buffer. 271 /// 272 UINT8 **SupportedOptions; 273 } EFI_MTFTP6_MODE_DATA; 274 275 /// 276 /// EFI_MTFTP_OVERRIDE_DATA 277 /// 278 typedef struct { 279 /// 280 /// IP address of the MTFTPv6 server. If set to all zero, the value that 281 /// was set by the EFI_MTFTP6_PROTOCOL.Configure() function will be used. 282 /// 283 EFI_IPv6_ADDRESS ServerIp; 284 /// 285 /// MTFTPv6 server port number. If set to zero, it will use the value 286 /// that was set by the EFI_MTFTP6_PROTOCOL.Configure() function. 287 /// 288 UINT16 ServerPort; 289 /// 290 /// Number of times to transmit MTFTPv6 request packets and wait 291 /// for a response. If set to zero, the value that was set by 292 /// theEFI_MTFTP6_PROTOCOL.Configure() function will be used. 293 /// 294 UINT16 TryCount; 295 /// 296 /// Number of seconds to wait for a response after sending the 297 /// MTFTPv6 request packet. If set to zero, the value that was set by 298 /// the EFI_MTFTP6_PROTOCOL.Configure() function will be used. 299 /// 300 UINT16 TimeoutValue; 301 } EFI_MTFTP6_OVERRIDE_DATA; 302 303 /// 304 /// EFI_MTFTP6_OPTION 305 /// 306 typedef struct { 307 UINT8 *OptionStr; ///< Pointer to the null-terminated ASCII MTFTPv6 option string. 308 UINT8 *ValueStr; ///< Pointer to the null-terminated ASCII MTFTPv6 value string. 309 } EFI_MTFTP6_OPTION; 310 311 /** 312 EFI_MTFTP6_TIMEOUT_CALLBACK is a callback function that the caller provides to capture the 313 timeout event in the EFI_MTFTP6_PROTOCOL.ReadFile(), EFI_MTFTP6_PROTOCOL.WriteFile() or 314 EFI_MTFTP6_PROTOCOL.ReadDirectory() functions. 315 316 Whenever a timeout occurs, the EFI MTFTPv6 Protocol driver will call the EFI_MTFTP6_TIMEOUT_CALLBACK 317 function to notify the caller of the timeout event. Any status code other than EFI_SUCCESS 318 that is returned from this function will abort the current download process. 319 320 @param[in] This Pointer to the EFI_MTFTP6_PROTOCOL instance. 321 @param[in] Token The token that the caller provided in the EFI_MTFTP6_PROTOCOl.ReadFile(), 322 WriteFile() or ReadDirectory() function. 323 @param[in] PacketLen Indicates the length of the packet. 324 @param[in] Packet Pointer to an MTFTPv6 packet. 325 326 @retval EFI_SUCCESS Operation sucess. 327 @retval Others Aborts session. 328 329 **/ 330 typedef 331 EFI_STATUS 332 (EFIAPI *EFI_MTFTP6_CHECK_PACKET)( 333 IN EFI_MTFTP6_PROTOCOL *This, 334 IN EFI_MTFTP6_TOKEN *Token, 335 IN UINT16 PacketLen, 336 IN EFI_MTFTP6_PACKET *Packet 337 ); 338 339 /** 340 EFI_MTFTP6_TIMEOUT_CALLBACK is a callback function that the caller provides to capture the 341 timeout event in the EFI_MTFTP6_PROTOCOL.ReadFile(), EFI_MTFTP6_PROTOCOL.WriteFile() or 342 EFI_MTFTP6_PROTOCOL.ReadDirectory() functions. 343 344 Whenever a timeout occurs, the EFI MTFTPv6 Protocol driver will call the EFI_MTFTP6_TIMEOUT_CALLBACK 345 function to notify the caller of the timeout event. Any status code other than EFI_SUCCESS 346 that is returned from this function will abort the current download process. 347 348 @param[in] This Pointer to the EFI_MTFTP6_PROTOCOL instance. 349 @param[in] Token The token that is provided in the EFI_MTFTP6_PROTOCOL.ReadFile() or 350 EFI_MTFTP6_PROTOCOL.WriteFile() or EFI_MTFTP6_PROTOCOL.ReadDirectory() 351 functions by the caller. 352 353 @retval EFI_SUCCESS Operation sucess. 354 @retval Others Aborts session. 355 356 **/ 357 typedef 358 EFI_STATUS 359 (EFIAPI *EFI_MTFTP6_TIMEOUT_CALLBACK)( 360 IN EFI_MTFTP6_PROTOCOL *This, 361 IN EFI_MTFTP6_TOKEN *Token 362 ); 363 364 /** 365 EFI_MTFTP6_PACKET_NEEDED is a callback function that the caller provides to feed data to the 366 EFI_MTFTP6_PROTOCOL.WriteFile() function. 367 368 EFI_MTFTP6_PACKET_NEEDED provides another mechanism for the caller to provide data to upload 369 other than a static buffer. The EFI MTFTP6 Protocol driver always calls EFI_MTFTP6_PACKET_NEEDED 370 to get packet data from the caller if no static buffer was given in the initial call to 371 EFI_MTFTP6_PROTOCOL.WriteFile() function. Setting *Length to zero signals the end of the session. 372 Returning a status code other than EFI_SUCCESS aborts the session. 373 374 @param[in] This Pointer to the EFI_MTFTP6_PROTOCOL instance. 375 @param[in] Token The token provided in the EFI_MTFTP6_PROTOCOL.WriteFile() by the caller. 376 @param[in, out] Length Indicates the length of the raw data wanted on input, and the 377 length the data available on output. 378 @param[out] Buffer Pointer to the buffer where the data is stored. 379 380 @retval EFI_SUCCESS Operation sucess. 381 @retval Others Aborts session. 382 383 **/ 384 typedef 385 EFI_STATUS 386 (EFIAPI *EFI_MTFTP6_PACKET_NEEDED)( 387 IN EFI_MTFTP6_PROTOCOL *This, 388 IN EFI_MTFTP6_TOKEN *Token, 389 IN OUT UINT16 *Length, 390 OUT VOID **Buffer 391 ); 392 393 struct _EFI_MTFTP6_TOKEN { 394 /// 395 /// The status that is returned to the caller at the end of the operation 396 /// to indicate whether this operation completed successfully. 397 /// Defined Status values are listed below. 398 /// 399 EFI_STATUS Status; 400 /// 401 /// The event that will be signaled when the operation completes. If 402 /// set to NULL, the corresponding function will wait until the read or 403 /// write operation finishes. The type of Event must be EVT_NOTIFY_SIGNAL. 404 /// 405 EFI_EVENT Event; 406 /// 407 /// If not NULL, the data that will be used to override the existing 408 /// configure data. 409 /// 410 EFI_MTFTP6_OVERRIDE_DATA *OverrideData; 411 /// 412 /// Pointer to the null-terminated ASCII file name string. 413 /// 414 UINT8 *Filename; 415 /// 416 /// Pointer to the null-terminated ASCII mode string. If NULL, octet is used. 417 /// 418 UINT8 *ModeStr; 419 /// 420 /// Number of option/value string pairs. 421 /// 422 UINT32 OptionCount; 423 /// 424 /// Pointer to an array of option/value string pairs. Ignored if 425 /// OptionCount is zero. Both a remote server and this driver 426 /// implementation should support these options. If one or more 427 /// options are unrecognized by this implementation, it is sent to the 428 /// remote server without being changed. 429 /// 430 EFI_MTFTP6_OPTION *OptionList; 431 /// 432 /// On input, the size, in bytes, of Buffer. On output, the number 433 /// of bytes transferred. 434 /// 435 UINT64 BufferSize; 436 /// 437 /// Pointer to the data buffer. Data that is downloaded from the 438 /// MTFTPv6 server is stored here. Data that is uploaded to the 439 /// MTFTPv6 server is read from here. Ignored if BufferSize is zero. 440 /// 441 VOID *Buffer; 442 /// 443 /// Pointer to the context that will be used by CheckPacket, 444 /// TimeoutCallback and PacketNeeded. 445 /// 446 VOID *Context; 447 /// 448 /// Pointer to the callback function to check the contents of the 449 /// received packet. 450 /// 451 EFI_MTFTP6_CHECK_PACKET CheckPacket; 452 /// 453 /// Pointer to the function to be called when a timeout occurs. 454 /// 455 EFI_MTFTP6_TIMEOUT_CALLBACK TimeoutCallback; 456 /// 457 /// Pointer to the function to provide the needed packet contents. 458 /// Only used in WriteFile() operation. 459 /// 460 EFI_MTFTP6_PACKET_NEEDED PacketNeeded; 461 }; 462 463 /** 464 Read the current operational settings. 465 466 The GetModeData() function reads the current operational settings of this EFI MTFTPv6 467 Protocol driver instance. 468 469 @param[in] This Pointer to the EFI_MTFTP6_PROTOCOL instance. 470 @param[out] ModeData The buffer in which the EFI MTFTPv6 Protocol driver mode 471 data is returned. 472 473 @retval EFI_SUCCESS The configuration data was successfully returned. 474 @retval EFI_OUT_OF_RESOURCES The required mode data could not be allocated. 475 @retval EFI_INVALID_PARAMETER This is NULL or ModeData is NULL. 476 477 **/ 478 typedef 479 EFI_STATUS 480 (EFIAPI *EFI_MTFTP6_GET_MODE_DATA)( 481 IN EFI_MTFTP6_PROTOCOL *This, 482 OUT EFI_MTFTP6_MODE_DATA *ModeData 483 ); 484 485 /** 486 Initializes, changes, or resets the default operational setting for this EFI MTFTPv6 487 Protocol driver instance. 488 489 The Configure() function is used to set and change the configuration data for this EFI 490 MTFTPv6 Protocol driver instance. The configuration data can be reset to startup defaults by calling 491 Configure() with MtftpConfigData set to NULL. Whenever the instance is reset, any 492 pending operation is aborted. By changing the EFI MTFTPv6 Protocol driver instance configuration 493 data, the client can connect to different MTFTPv6 servers. The configuration parameters in 494 MtftpConfigData are used as the default parameters in later MTFTPv6 operations and can be 495 overridden in later operations. 496 497 @param[in] This Pointer to the EFI_MTFTP6_PROTOCOL instance. 498 @param[in] MtftpConfigData Pointer to the configuration data structure. 499 500 @retval EFI_SUCCESS The EFI MTFTPv6 Protocol instance was configured successfully. 501 @retval EFI_INVALID_PARAMETER One or more following conditions are TRUE: 502 - This is NULL. 503 - MtftpConfigData.StationIp is neither zero nor one 504 of the configured IP addresses in the underlying IPv6 driver. 505 - MtftpCofigData.ServerIp is not a valid IPv6 unicast address. 506 @retval EFI_ACCESS_DENIED - The configuration could not be changed at this time because there 507 is some MTFTP background operation in progress. 508 - MtftpCofigData.LocalPort is already in use. 509 @retval EFI_NO_MAPPING The underlying IPv6 driver was responsible for choosing a source 510 address for this instance, but no source address was available for use. 511 @retval EFI_OUT_OF_RESOURCES The EFI MTFTPv6 Protocol driver instance data could not be 512 allocated. 513 @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. The EFI 514 MTFTPv6 Protocol driver instance is not configured. 515 516 517 **/ 518 typedef 519 EFI_STATUS 520 (EFIAPI *EFI_MTFTP6_CONFIGURE)( 521 IN EFI_MTFTP6_PROTOCOL *This, 522 IN EFI_MTFTP6_CONFIG_DATA *MtftpConfigData OPTIONAL 523 ); 524 525 /** 526 Get information about a file from an MTFTPv6 server. 527 528 The GetInfo() function assembles an MTFTPv6 request packet with options, sends it to the 529 MTFTPv6 server, and may return an MTFTPv6 OACK, MTFTPv6 ERROR, or ICMP ERROR packet. 530 Retries occur only if no response packets are received from the MTFTPv6 server before the 531 timeout expires. 532 533 @param[in] This Pointer to the EFI_MTFTP6_PROTOCOL instance. 534 @param[in] OverrideData Data that is used to override the existing parameters. If NULL, the 535 default parameters that were set in the EFI_MTFTP6_PROTOCOL.Configure() 536 function are used. 537 @param[in] Filename Pointer to null-terminated ASCII file name string. 538 @param[in] ModeStr Pointer to null-terminated ASCII mode string. If NULL, octet will be used 539 @param[in] OptionCount Number of option/value string pairs in OptionList. 540 @param[in] OptionList Pointer to array of option/value string pairs. Ignored if 541 OptionCount is zero. 542 @param[out] PacketLength The number of bytes in the returned packet. 543 @param[out] Packet The pointer to the received packet. This buffer must be freed by 544 the caller. 545 546 @retval EFI_SUCCESS An MTFTPv6 OACK packet was received and is in the Packet. 547 @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: 548 - This is NULL. 549 - Filename is NULL 550 - OptionCount is not zero and OptionList is NULL. 551 - One or more options in OptionList have wrong format. 552 - PacketLength is NULL. 553 - OverrideData.ServerIp is not valid unicast IPv6 addresses. 554 @retval EFI_UNSUPPORTED One or more options in the OptionList are unsupported by 555 this implementation. 556 @retval EFI_NOT_STARTED The EFI MTFTPv6 Protocol driver has not been started. 557 @retval EFI_NO_MAPPING The underlying IPv6 driver was responsible for choosing a source 558 address for this instance, but no source address was available for use. 559 @retval EFI_ACCESS_DENIED The previous operation has not completed yet. 560 @retval EFI_OUT_OF_RESOURCES Required system resources could not be allocated. 561 @retval EFI_TFTP_ERROR An MTFTPv6 ERROR packet was received and is in the Packet. 562 @retval EFI_NETWORK_UNREACHABLE An ICMP network unreachable error packet was received and the Packet is set to NULL. 563 @retval EFI_HOST_UNREACHABLE An ICMP host unreachable error packet was received and the Packet is set to NULL. 564 @retval EFI_PROTOCOL_UNREACHABLE An ICMP protocol unreachable error packet was received and the Packet is set to NULL. 565 @retval EFI_PORT_UNREACHABLE An ICMP port unreachable error packet was received and the Packet is set to NULL. 566 @retval EFI_ICMP_ERROR Some other ICMP ERROR packet was received and the Packet is set to NULL. 567 @retval EFI_PROTOCOL_ERROR An unexpected MTFTPv6 packet was received and is in the Packet. 568 @retval EFI_TIMEOUT No responses were received from the MTFTPv6 server. 569 @retval EFI_DEVICE_ERROR An unexpected network error or system error occurred. 570 @retval EFI_NO_MEDIA There was a media error. 571 572 **/ 573 typedef 574 EFI_STATUS 575 (EFIAPI *EFI_MTFTP6_GET_INFO)( 576 IN EFI_MTFTP6_PROTOCOL *This, 577 IN EFI_MTFTP6_OVERRIDE_DATA *OverrideData OPTIONAL, 578 IN UINT8 *Filename, 579 IN UINT8 *ModeStr OPTIONAL, 580 IN UINT8 OptionCount, 581 IN EFI_MTFTP6_OPTION *OptionList OPTIONAL, 582 OUT UINT32 *PacketLength, 583 OUT EFI_MTFTP6_PACKET **Packet OPTIONAL 584 ); 585 586 /** 587 Parse the options in an MTFTPv6 OACK packet. 588 589 The ParseOptions() function parses the option fields in an MTFTPv6 OACK packet and 590 returns the number of options that were found and optionally a list of pointers to 591 the options in the packet. 592 If one or more of the option fields are not valid, then EFI_PROTOCOL_ERROR is returned 593 and *OptionCount and *OptionList stop at the last valid option. 594 595 @param[in] This Pointer to the EFI_MTFTP6_PROTOCOL instance. 596 @param[in] PacketLen Length of the OACK packet to be parsed. 597 @param[in] Packet Pointer to the OACK packet to be parsed. 598 @param[out] OptionCount Pointer to the number of options in the following OptionList. 599 @param[out] OptionList Pointer to EFI_MTFTP6_OPTION storage. Each pointer in the 600 OptionList points to the corresponding MTFTP option buffer 601 in the Packet. Call the EFI Boot Service FreePool() to 602 release the OptionList if the options in this OptionList 603 are not needed any more. 604 605 @retval EFI_SUCCESS The OACK packet was valid and the OptionCount and 606 OptionList parameters have been updated. 607 @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: 608 - PacketLen is 0. 609 - Packet is NULL or Packet is not a valid MTFTPv6 packet. 610 - OptionCount is NULL. 611 @retval EFI_NOT_FOUND No options were found in the OACK packet. 612 @retval EFI_OUT_OF_RESOURCES Storage for the OptionList array can not be allocated. 613 @retval EFI_PROTOCOL_ERROR One or more of the option fields is invalid. 614 615 **/ 616 typedef 617 EFI_STATUS 618 (EFIAPI *EFI_MTFTP6_PARSE_OPTIONS)( 619 IN EFI_MTFTP6_PROTOCOL *This, 620 IN UINT32 PacketLen, 621 IN EFI_MTFTP6_PACKET *Packet, 622 OUT UINT32 *OptionCount, 623 OUT EFI_MTFTP6_OPTION **OptionList OPTIONAL 624 ); 625 626 /** 627 Download a file from an MTFTPv6 server. 628 629 The ReadFile() function is used to initialize and start an MTFTPv6 download process and 630 optionally wait for completion. When the download operation completes, whether successfully or 631 not, the Token.Status field is updated by the EFI MTFTPv6 Protocol driver and then 632 Token.Event is signaled if it is not NULL. 633 634 Data can be downloaded from the MTFTPv6 server into either of the following locations: 635 - A fixed buffer that is pointed to by Token.Buffer 636 - A download service function that is pointed to by Token.CheckPacket 637 638 If both Token.Buffer and Token.CheckPacket are used, then Token.CheckPacket 639 will be called first. If the call is successful, the packet will be stored in Token.Buffer. 640 641 @param[in] This Pointer to the EFI_MTFTP6_PROTOCOL instance. 642 @param[in] Token Pointer to the token structure to provide the parameters that are 643 used in this operation. 644 645 @retval EFI_SUCCESS The data file has been transferred successfully. 646 @retval EFI_OUT_OF_RESOURCES Required system resources could not be allocated. 647 @retval EFI_BUFFER_TOO_SMALL BufferSize is not zero but not large enough to hold the 648 downloaded data in downloading process. 649 @retval EFI_ABORTED Current operation is aborted by user. 650 @retval EFI_NETWORK_UNREACHABLE An ICMP network unreachable error packet was received. 651 @retval EFI_HOST_UNREACHABLE An ICMP host unreachable error packet was received. 652 @retval EFI_PROTOCOL_UNREACHABLE An ICMP protocol unreachable error packet was received. 653 @retval EFI_PORT_UNREACHABLE An ICMP port unreachable error packet was received. 654 @retval EFI_ICMP_ERROR An ICMP ERROR packet was received. 655 @retval EFI_TIMEOUT No responses were received from the MTFTPv6 server. 656 @retval EFI_TFTP_ERROR An MTFTPv6 ERROR packet was received. 657 @retval EFI_DEVICE_ERROR An unexpected network error or system error occurred. 658 @retval EFI_NO_MEDIA There was a media error. 659 660 **/ 661 typedef 662 EFI_STATUS 663 (EFIAPI *EFI_MTFTP6_READ_FILE)( 664 IN EFI_MTFTP6_PROTOCOL *This, 665 IN EFI_MTFTP6_TOKEN *Token 666 ); 667 668 /** 669 Send a file to an MTFTPv6 server. May be unsupported in some implementations. 670 671 The WriteFile() function is used to initialize an uploading operation with the given option list 672 and optionally wait for completion. If one or more of the options is not supported by the server, the 673 unsupported options are ignored and a standard TFTP process starts instead. When the upload 674 process completes, whether successfully or not, Token.Event is signaled, and the EFI MTFTPv6 675 Protocol driver updates Token.Status. 676 677 The caller can supply the data to be uploaded in the following two modes: 678 - Through the user-provided buffer 679 - Through a callback function 680 681 With the user-provided buffer, the Token.BufferSize field indicates the length of the buffer, 682 and the driver will upload the data in the buffer. With an EFI_MTFTP6_PACKET_NEEDED 683 callback function, the driver will call this callback function to get more data from the user to upload. 684 See the definition of EFI_MTFTP6_PACKET_NEEDED for more information. These two modes 685 cannot be used at the same time. The callback function will be ignored if the user provides the 686 buffer. 687 688 @param[in] This Pointer to the EFI_MTFTP6_PROTOCOL instance. 689 @param[in] Token Pointer to the token structure to provide the parameters that are 690 used in this operation. 691 692 @retval EFI_SUCCESS The upload session has started. 693 @retval EFI_UNSUPPORTED The operation is not supported by this implementation. 694 @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: 695 - This is NULL. 696 - Token is NULL. 697 - Token.Filename is NULL. 698 - Token.OptionCount is not zero and Token.OptionList is NULL. 699 - One or more options in Token.OptionList have wrong format. 700 - Token.Buffer and Token.PacketNeeded are both NULL. 701 - Token.OverrideData.ServerIp is not valid unicast IPv6 addresses. 702 @retval EFI_UNSUPPORTED One or more options in the Token.OptionList are not 703 supported by this implementation. 704 @retval EFI_NOT_STARTED The EFI MTFTPv6 Protocol driver has not been started. 705 @retval EFI_NO_MAPPING The underlying IPv6 driver was responsible for choosing a source 706 address for this instance, but no source address was available for use. 707 @retval EFI_ALREADY_STARTED This Token is already being used in another MTFTPv6 session. 708 @retval EFI_OUT_OF_RESOURCES Required system resources could not be allocated. 709 @retval EFI_ACCESS_DENIED The previous operation has not completed yet. 710 @retval EFI_DEVICE_ERROR An unexpected network error or system error occurred. 711 712 **/ 713 typedef 714 EFI_STATUS 715 (EFIAPI *EFI_MTFTP6_WRITE_FILE)( 716 IN EFI_MTFTP6_PROTOCOL *This, 717 IN EFI_MTFTP6_TOKEN *Token 718 ); 719 720 /** 721 Download a data file directory from an MTFTPv6 server. May be unsupported in some implementations. 722 723 The ReadDirectory() function is used to return a list of files on the MTFTPv6 server that are 724 logically (or operationally) related to Token.Filename. The directory request packet that is sent 725 to the server is built with the option list that was provided by caller, if present. 726 727 The file information that the server returns is put into either of the following locations: 728 - A fixed buffer that is pointed to by Token.Buffer 729 - A download service function that is pointed to by Token.CheckPacket 730 731 If both Token.Buffer and Token.CheckPacket are used, then Token.CheckPacket 732 will be called first. If the call is successful, the packet will be stored in Token.Buffer. 733 734 The returned directory listing in the Token.Buffer or EFI_MTFTP6_PACKET consists of a list 735 of two or three variable-length ASCII strings, each terminated by a null character, for each file in the 736 directory. If the multicast option is involved, the first field of each directory entry is the static 737 multicast IP address and UDP port number that is associated with the file name. The format of the 738 field is ip:ip:ip:ip:port. If the multicast option is not involved, this field and its terminating 739 null character are not present. 740 741 The next field of each directory entry is the file name and the last field is the file information string. 742 The information string contains the file size and the create/modify timestamp. The format of the 743 information string is filesize yyyy-mm-dd hh:mm:ss:ffff. The timestamp is 744 Coordinated Universal Time (UTC; also known as Greenwich Mean Time [GMT]). 745 746 @param[in] This Pointer to the EFI_MTFTP6_PROTOCOL instance. 747 @param[in] Token Pointer to the token structure to provide the parameters that are 748 used in this operation. 749 750 @retval EFI_SUCCESS The MTFTPv6 related file "directory" has been downloaded. 751 @retval EFI_UNSUPPORTED The EFI MTFTPv6 Protocol driver does not support this function. 752 @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: 753 - This is NULL. 754 - Token is NULL. 755 - Token.Filename is NULL. 756 - Token.OptionCount is not zero and Token.OptionList is NULL. 757 - One or more options in Token.OptionList have wrong format. 758 - Token.Buffer and Token.CheckPacket are both NULL. 759 - Token.OverrideData.ServerIp is not valid unicast IPv6 addresses. 760 @retval EFI_UNSUPPORTED One or more options in the Token.OptionList are not 761 supported by this implementation. 762 @retval EFI_NOT_STARTED The EFI MTFTPv6 Protocol driver has not been started. 763 @retval EFI_NO_MAPPING The underlying IPv6 driver was responsible for choosing a source 764 address for this instance, but no source address was available for use. 765 @retval EFI_ALREADY_STARTED This Token is already being used in another MTFTPv6 session. 766 @retval EFI_OUT_OF_RESOURCES Required system resources could not be allocated. 767 @retval EFI_ACCESS_DENIED The previous operation has not completed yet. 768 @retval EFI_DEVICE_ERROR An unexpected network error or system error occurred. 769 770 **/ 771 typedef 772 EFI_STATUS 773 (EFIAPI *EFI_MTFTP6_READ_DIRECTORY)( 774 IN EFI_MTFTP6_PROTOCOL *This, 775 IN EFI_MTFTP6_TOKEN *Token 776 ); 777 778 /** 779 Polls for incoming data packets and processes outgoing data packets. 780 781 The Poll() function can be used by network drivers and applications to increase the rate that data 782 packets are moved between the communications device and the transmit and receive queues. 783 In some systems, the periodic timer event in the managed network driver may not poll the 784 underlying communications device fast enough to transmit and/or receive all data packets without 785 missing incoming packets or dropping outgoing packets. Drivers and applications that are 786 experiencing packet loss should try calling the Poll() function more often. 787 788 @param[in] This Pointer to the EFI_MTFTP6_PROTOCOL instance. 789 790 @retval EFI_SUCCESS Incoming or outgoing data was processed. 791 @retval EFI_NOT_STARTED This EFI MTFTPv6 Protocol instance has not been started. 792 @retval EFI_INVALID_PARAMETER This is NULL. 793 @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. 794 @retval EFI_TIMEOUT Data was dropped out of the transmit and/or receive queue. 795 Consider increasing the polling rate. 796 797 **/ 798 typedef 799 EFI_STATUS 800 (EFIAPI *EFI_MTFTP6_POLL)( 801 IN EFI_MTFTP6_PROTOCOL *This 802 ); 803 804 /// 805 /// The EFI_MTFTP6_PROTOCOL is designed to be used by UEFI drivers and applications to transmit 806 /// and receive data files. The EFI MTFTPv6 Protocol driver uses the underlying EFI UDPv6 Protocol 807 /// driver and EFI IPv6 Protocol driver. 808 /// 809 struct _EFI_MTFTP6_PROTOCOL { 810 EFI_MTFTP6_GET_MODE_DATA GetModeData; 811 EFI_MTFTP6_CONFIGURE Configure; 812 EFI_MTFTP6_GET_INFO GetInfo; 813 EFI_MTFTP6_PARSE_OPTIONS ParseOptions; 814 EFI_MTFTP6_READ_FILE ReadFile; 815 EFI_MTFTP6_WRITE_FILE WriteFile; 816 EFI_MTFTP6_READ_DIRECTORY ReadDirectory; 817 EFI_MTFTP6_POLL Poll; 818 }; 819 820 extern EFI_GUID gEfiMtftp6ServiceBindingProtocolGuid; 821 extern EFI_GUID gEfiMtftp6ProtocolGuid; 822 823 #endif 824 825