1 #include "wifi_hal.h" 2 3 #ifndef __WIFI_HAL_GSCAN_H__ 4 #define __WIFI_HAL_GSCAN_H__ 5 6 /* AP Scans */ 7 8 typedef enum { 9 WIFI_BAND_UNSPECIFIED, 10 WIFI_BAND_BG = 1, // 2.4 GHz 11 WIFI_BAND_A = 2, // 5 GHz without DFS 12 WIFI_BAND_A_DFS = 4, // 5 GHz DFS only 13 WIFI_BAND_A_WITH_DFS = 6, // 5 GHz with DFS 14 WIFI_BAND_ABG = 3, // 2.4 GHz + 5 GHz; no DFS 15 WIFI_BAND_ABG_WITH_DFS = 7, // 2.4 GHz + 5 GHz with DFS 16 } wifi_band; 17 18 #define MAX_CHANNELS 16 19 #define MAX_BUCKETS 16 20 #define MAX_HOTLIST_APS 128 21 #define MAX_SIGNIFICANT_CHANGE_APS 64 22 #define MAX_EPNO_NETWORKS 64 23 #define MAX_HOTLIST_SSID 8 24 #define MAX_AP_CACHE_PER_SCAN 32 25 26 wifi_error wifi_get_valid_channels(wifi_interface_handle handle, 27 int band, int max_channels, wifi_channel *channels, int *num_channels); 28 29 typedef struct { 30 int max_scan_cache_size; // total space allocated for scan (in bytes) 31 int max_scan_buckets; // maximum number of channel buckets 32 int max_ap_cache_per_scan; // maximum number of APs that can be stored per scan 33 int max_rssi_sample_size; // number of RSSI samples used for averaging RSSI 34 int max_scan_reporting_threshold; // max possible report_threshold as described 35 // in wifi_scan_cmd_params 36 int max_hotlist_bssids; // maximum number of entries for hotlist BSSIDs 37 int max_hotlist_ssids; // maximum number of entries for hotlist SSIDs 38 int max_significant_wifi_change_aps; // maximum number of entries for 39 // significant wifi change APs 40 int max_bssid_history_entries; // number of BSSID/RSSI entries that device can hold 41 int max_number_epno_networks; // max number of epno entries 42 int max_number_epno_networks_by_ssid; // max number of epno entries if ssid is specified, 43 // that is, epno entries for which an exact match is 44 // required, or entries corresponding to hidden ssids 45 int max_number_of_white_listed_ssid; // max number of white listed SSIDs, M target is 2 to 4 46 } wifi_gscan_capabilities; 47 48 wifi_error wifi_get_gscan_capabilities(wifi_interface_handle handle, 49 wifi_gscan_capabilities *capabilities); 50 51 typedef enum { 52 WIFI_SCAN_RESULTS_AVAILABLE, // reported when REPORT_EVENTS_EACH_SCAN is set and a scan 53 // completes. WIFI_SCAN_THRESHOLD_NUM_SCANS or 54 // WIFI_SCAN_THRESHOLD_PERCENT can be reported instead if the 55 // reason for the event is available; however, at most one of 56 // these events should be reported per scan. If there are 57 // multiple buckets that were scanned this period and one has the 58 // EACH_SCAN flag set then this event should be prefered. 59 WIFI_SCAN_THRESHOLD_NUM_SCANS, // can be reported when REPORT_EVENTS_EACH_SCAN is not set and 60 // report_threshold_num_scans is reached. 61 WIFI_SCAN_THRESHOLD_PERCENT, // can be reported when REPORT_EVENTS_EACH_SCAN is not set and 62 // report_threshold_percent is reached. 63 WIFI_SCAN_FAILED, // reported when currently executing gscans have failed. 64 // start_gscan will need to be called again in order to continue 65 // scanning. This is intended to indicate abnormal scan 66 // terminations (not those as a result of stop_gscan). 67 } wifi_scan_event; 68 69 70 /* Format of information elements found in the beacon */ 71 typedef struct { 72 byte id; // element identifier 73 byte len; // number of bytes to follow 74 byte data[]; 75 } wifi_information_element; 76 77 typedef struct { 78 wifi_timestamp ts; // time since boot (in microsecond) when the result was 79 // retrieved 80 char ssid[32+1]; // null terminated 81 mac_addr bssid; 82 wifi_channel channel; // channel frequency in MHz 83 wifi_rssi rssi; // in db 84 wifi_timespan rtt; // in nanoseconds 85 wifi_timespan rtt_sd; // standard deviation in rtt 86 unsigned short beacon_period; // period advertised in the beacon 87 unsigned short capability; // capabilities advertised in the beacon 88 unsigned int ie_length; // size of the ie_data blob 89 char ie_data[1]; // blob of all the information elements found in the 90 // beacon; this data should be a packed list of 91 // wifi_information_element objects, one after the other. 92 // other fields 93 } wifi_scan_result; 94 95 static_assert(MAX_BUCKETS <= 8 * sizeof(unsigned), 96 "The buckets_scanned bitset is represented by an unsigned int and cannot support this many " 97 "buckets on this platform."); 98 typedef struct { 99 /* reported when each probe response is received, if report_events 100 * enabled in wifi_scan_cmd_params. buckets_scanned is a bitset of the 101 * buckets that are currently being scanned. See the buckets_scanned field 102 * in the wifi_cached_scan_results struct for more details. 103 */ 104 void (*on_full_scan_result) (wifi_request_id id, wifi_scan_result *result, 105 unsigned buckets_scanned); 106 107 /* indicates progress of scanning statemachine */ 108 void (*on_scan_event) (wifi_request_id id, wifi_scan_event event); 109 110 } wifi_scan_result_handler; 111 112 typedef struct { 113 wifi_channel channel; // frequency 114 int dwellTimeMs; // dwell time hint 115 int passive; // 0 => active, 1 => passive scan; ignored for DFS 116 /* Add channel class */ 117 } wifi_scan_channel_spec; 118 119 #define REPORT_EVENTS_EACH_SCAN (1 << 0) 120 #define REPORT_EVENTS_FULL_RESULTS (1 << 1) 121 #define REPORT_EVENTS_NO_BATCH (1 << 2) 122 123 typedef struct { 124 int bucket; // bucket index, 0 based 125 wifi_band band; // when UNSPECIFIED, use channel list 126 int period; // desired period, in millisecond; if this is too 127 // low, the firmware should choose to generate results as 128 // fast as it can instead of failing the command. 129 // for exponential backoff bucket this is the min_period 130 /* report_events semantics - 131 * This is a bit field; which defines following bits - 132 * REPORT_EVENTS_EACH_SCAN => report a scan completion event after scan. If this is not set 133 * then scan completion events should be reported if 134 * report_threshold_percent or report_threshold_num_scans is 135 * reached. 136 * REPORT_EVENTS_FULL_RESULTS => forward scan results (beacons/probe responses + IEs) 137 * in real time to HAL, in addition to completion events 138 * Note: To keep backward compatibility, fire completion 139 * events regardless of REPORT_EVENTS_EACH_SCAN. 140 * REPORT_EVENTS_NO_BATCH => controls if scans for this bucket should be placed in the 141 * history buffer 142 */ 143 byte report_events; 144 int max_period; // if max_period is non zero or different than period, then this bucket is 145 // an exponential backoff bucket and the scan period will grow exponentially 146 // as per formula: actual_period(N) = period * (base ^ (N/step_count)) 147 // to a maximum period of max_period 148 int base; // for exponential back off bucket: multiplier: new_period=old_period*base 149 int step_count; // for exponential back off bucket, number of scans to perform for a given 150 // period 151 152 int num_channels; 153 // channels to scan; these may include DFS channels 154 // Note that a given channel may appear in multiple buckets 155 wifi_scan_channel_spec channels[MAX_CHANNELS]; 156 } wifi_scan_bucket_spec; 157 158 typedef struct { 159 int base_period; // base timer period in ms 160 int max_ap_per_scan; // number of access points to store in each scan entry in 161 // the BSSID/RSSI history buffer (keep the highest RSSI 162 // access points) 163 int report_threshold_percent; // in %, when scan buffer is this much full, wake up apps 164 // processor 165 int report_threshold_num_scans; // in number of scans, wake up AP after these many scans 166 int num_buckets; 167 wifi_scan_bucket_spec buckets[MAX_BUCKETS]; 168 } wifi_scan_cmd_params; 169 170 /* 171 * Start periodic GSCAN 172 * When this is called all requested buckets should be scanned, starting the beginning of the cycle 173 * 174 * For example: 175 * If there are two buckets specified 176 * - Bucket 1: period=10s 177 * - Bucket 2: period=20s 178 * - Bucket 3: period=30s 179 * Then the following scans should occur 180 * - t=0 buckets 1, 2, and 3 are scanned 181 * - t=10 bucket 1 is scanned 182 * - t=20 bucket 1 and 2 are scanned 183 * - t=30 bucket 1 and 3 are scanned 184 * - t=40 bucket 1 and 2 are scanned 185 * - t=50 bucket 1 is scanned 186 * - t=60 buckets 1, 2, and 3 are scanned 187 * - and the patter repeats 188 * 189 * If any scan does not occur or is incomplete (error, interrupted, etc) then a cached scan result 190 * should still be recorded with the WIFI_SCAN_FLAG_INTERRUPTED flag set. 191 */ 192 wifi_error wifi_start_gscan(wifi_request_id id, wifi_interface_handle iface, 193 wifi_scan_cmd_params params, wifi_scan_result_handler handler); 194 195 /* Stop periodic GSCAN */ 196 wifi_error wifi_stop_gscan(wifi_request_id id, wifi_interface_handle iface); 197 198 typedef enum { 199 WIFI_SCAN_FLAG_INTERRUPTED = 1 // Indicates that scan results are not complete because 200 // probes were not sent on some channels 201 } wifi_scan_flags; 202 203 /* Get the GSCAN cached scan results */ 204 typedef struct { 205 int scan_id; // a unique identifier for the scan unit 206 int flags; // a bitmask with additional 207 // information about scan. 208 unsigned buckets_scanned; // a bitset of the buckets that were scanned. 209 // for example a value of 13 (0b1101) would 210 // indicate that buckets 0, 2 and 3 were 211 // scanned to produce this list of results. 212 // should be set to 0 if this information is 213 // not available. 214 int num_results; // number of bssids retrieved by the scan 215 wifi_scan_result results[MAX_AP_CACHE_PER_SCAN]; // scan results - one for each bssid 216 } wifi_cached_scan_results; 217 218 wifi_error wifi_get_cached_gscan_results(wifi_interface_handle iface, byte flush, 219 int max, wifi_cached_scan_results *results, int *num); 220 221 /* BSSID Hotlist */ 222 typedef struct { 223 void (*on_hotlist_ap_found)(wifi_request_id id, 224 unsigned num_results, wifi_scan_result *results); 225 void (*on_hotlist_ap_lost)(wifi_request_id id, 226 unsigned num_results, wifi_scan_result *results); 227 } wifi_hotlist_ap_found_handler; 228 229 typedef struct { 230 mac_addr bssid; // AP BSSID 231 wifi_rssi low; // low threshold 232 wifi_rssi high; // high threshold 233 } ap_threshold_param; 234 235 typedef struct { 236 int lost_ap_sample_size; 237 int num_bssid; // number of hotlist APs 238 ap_threshold_param ap[MAX_HOTLIST_APS]; // hotlist APs 239 } wifi_bssid_hotlist_params; 240 241 /* Set the BSSID Hotlist */ 242 wifi_error wifi_set_bssid_hotlist(wifi_request_id id, wifi_interface_handle iface, 243 wifi_bssid_hotlist_params params, wifi_hotlist_ap_found_handler handler); 244 245 /* Clear the BSSID Hotlist */ 246 wifi_error wifi_reset_bssid_hotlist(wifi_request_id id, wifi_interface_handle iface); 247 248 /* SSID Hotlist */ 249 typedef struct { 250 void (*on_hotlist_ssid_found)(wifi_request_id id, 251 unsigned num_results, wifi_scan_result *results); 252 void (*on_hotlist_ssid_lost)(wifi_request_id id, 253 unsigned num_results, wifi_scan_result *results); 254 } wifi_hotlist_ssid_handler; 255 256 typedef struct { 257 char ssid[32+1]; // SSID 258 wifi_band band; // band for this set of threshold params 259 wifi_rssi low; // low threshold 260 wifi_rssi high; // high threshold 261 } ssid_threshold_param; 262 263 typedef struct { 264 int lost_ssid_sample_size; 265 int num_ssid; // number of hotlist SSIDs 266 ssid_threshold_param ssid[MAX_HOTLIST_SSID]; // hotlist SSIDs 267 } wifi_ssid_hotlist_params; 268 269 /* Significant wifi change */ 270 typedef struct { 271 mac_addr bssid; // BSSID 272 wifi_channel channel; // channel frequency in MHz 273 int num_rssi; // number of rssi samples 274 wifi_rssi rssi[]; // RSSI history in db 275 } wifi_significant_change_result; 276 277 typedef struct { 278 void (*on_significant_change)(wifi_request_id id, 279 unsigned num_results, wifi_significant_change_result **results); 280 } wifi_significant_change_handler; 281 282 // The sample size parameters in the wifi_significant_change_params structure 283 // represent the number of occurence of a g-scan where the BSSID was seen and RSSI was 284 // collected for that BSSID, or, the BSSID was expected to be seen and didn't. 285 // for instance: lost_ap_sample_size : number of time a g-scan was performed on the 286 // channel the BSSID was seen last, and the BSSID was not seen during those g-scans 287 typedef struct { 288 int rssi_sample_size; // number of samples for averaging RSSI 289 int lost_ap_sample_size; // number of samples to confirm AP loss 290 int min_breaching; // number of APs breaching threshold 291 int num_bssid; // max 64 292 ap_threshold_param ap[MAX_SIGNIFICANT_CHANGE_APS]; 293 } wifi_significant_change_params; 294 295 /* Set the Signifcant AP change list */ 296 wifi_error wifi_set_significant_change_handler(wifi_request_id id, wifi_interface_handle iface, 297 wifi_significant_change_params params, wifi_significant_change_handler handler); 298 299 /* Clear the Signifcant AP change list */ 300 wifi_error wifi_reset_significant_change_handler(wifi_request_id id, wifi_interface_handle iface); 301 302 /* Random MAC OUI for PNO */ 303 wifi_error wifi_set_scanning_mac_oui(wifi_interface_handle handle, oui scan_oui); 304 305 306 // Enhanced PNO: 307 // Enhanced PNO feature is expected to be enabled all of the time (e.g. screen lit) and may thus 308 // require firmware to store a large number of networks, covering the whole list of known networks. 309 // Therefore, it is acceptable for firmware to store a crc24, crc32 or other short hash of the SSID, 310 // such that a low but non-zero probability of collision exist. With that scheme it should be 311 // possible for firmware to keep an entry as small as 4 bytes for each pno network. 312 // For instance, a firmware pn0 entry can be implemented in the form of: 313 // PNO ENTRY = crc24(3 bytes) | flags>>3 (5 bits) | auth flags(3 bits) 314 // 315 // No scans should be automatically performed by the chip. Instead all scan results from gscan 316 // should be scored and the wifi_epno_handler on_network_found callback should be called with 317 // the scan results. 318 // 319 // A PNO network shall be reported once, that is, once a network is reported by firmware 320 // its entry shall be marked as "done" until framework calls wifi_set_epno_list again. 321 // Calling wifi_set_epno_list shall reset the "done" status of pno networks in firmware. 322 // 323 // A network should only be considered found if its RSSI is above the minimum RSSI for its 324 // frequency range (min5GHz_rssi and min24GHz_rssi for 5GHz and 2.4GHz networks respectively). 325 // When disconnected the list of scan results should be returned if any network is found. 326 // When connected the scan results shall be reported only if the score of any network in the scan 327 // is greater than that of the currently connected BSSID. 328 // 329 // The FW should calculate the score of all the candidates (including currently connected one) 330 // with following equation: 331 // RSSI score = (RSSI + 85) * 4; 332 // If RSSI score > initial_score_max , RSSI score = initial_score_max; 333 // final score = RSSI score 334 // + current_connection_bonus (if currently connected BSSID) 335 // + same_network_bonus (if network has SAME_NETWORK flag) 336 // + secure_bonus (if the network is not open) 337 // + band5GHz_bonus (if BSSID is on 5G) 338 // If there is a BSSID’s score > current BSSID’s score, then report the cached scan results 339 // at the end of the scan (excluding the ones on blacklist) to the upper layer. 340 // Additionally, all BSSIDs that are in the BSSID blacklist should be ignored by Enhanced PNO 341 342 // Whether directed scan needs to be performed (for hidden SSIDs) 343 #define WIFI_PNO_FLAG_DIRECTED_SCAN (1 << 0) 344 // Whether PNO event shall be triggered if the network is found on A band 345 #define WIFI_PNO_FLAG_A_BAND (1 << 1) 346 // Whether PNO event shall be triggered if the network is found on G band 347 #define WIFI_PNO_FLAG_G_BAND (1 << 2) 348 // Whether strict matching is required 349 // If required then the firmware must store the network's SSID and not just a hash 350 #define WIFI_PNO_FLAG_STRICT_MATCH (1 << 3) 351 // If this SSID should be considered the same network as the currently connected one for scoring 352 #define WIFI_PNO_FLAG_SAME_NETWORK (1 << 4) 353 354 // Code for matching the beacon AUTH IE - additional codes TBD 355 #define WIFI_PNO_AUTH_CODE_OPEN (1 << 0) // open 356 #define WIFI_PNO_AUTH_CODE_PSK (1 << 1) // WPA_PSK or WPA2PSK 357 #define WIFI_PNO_AUTH_CODE_EAPOL (1 << 2) // any EAPOL 358 359 typedef struct { 360 char ssid[32+1]; // null terminated 361 byte flags; // WIFI_PNO_FLAG_XXX 362 byte auth_bit_field; // auth bit field for matching WPA IE 363 } wifi_epno_network; 364 365 /* ePNO Parameters */ 366 typedef struct { 367 int min5GHz_rssi; // minimum 5GHz RSSI for a BSSID to be considered 368 int min24GHz_rssi; // minimum 2.4GHz RSSI for a BSSID to be considered 369 int initial_score_max; // the maximum score that a network can have before bonuses 370 int current_connection_bonus; // only report when there is a network's score this much higher 371 // than the current connection. 372 int same_network_bonus; // score bonus for all networks with the same network flag 373 int secure_bonus; // score bonus for networks that are not open 374 int band5GHz_bonus; // 5GHz RSSI score bonus (applied to all 5GHz networks) 375 int num_networks; // number of wifi_epno_network objects 376 wifi_epno_network networks[MAX_EPNO_NETWORKS]; // PNO networks 377 } wifi_epno_params; 378 379 typedef struct { 380 // on results 381 void (*on_network_found)(wifi_request_id id, 382 unsigned num_results, wifi_scan_result *results); 383 } wifi_epno_handler; 384 385 386 /* Set the ePNO list - enable ePNO with the given parameters */ 387 wifi_error wifi_set_epno_list(wifi_request_id id, wifi_interface_handle iface, 388 const wifi_epno_params *epno_params, wifi_epno_handler handler); 389 390 /* Reset the ePNO list - no ePNO networks should be matched after this */ 391 wifi_error wifi_reset_epno_list(wifi_request_id id, wifi_interface_handle iface); 392 393 394 typedef struct { 395 int id; // identifier of this network block, report this in event 396 char realm[256]; // null terminated UTF8 encoded realm, 0 if unspecified 397 int64_t roamingConsortiumIds[16]; // roaming consortium ids to match, 0s if unspecified 398 byte plmn[3]; // mcc/mnc combination as per rules, 0s if unspecified 399 } wifi_passpoint_network; 400 401 typedef struct { 402 void (*on_passpoint_network_found)( 403 wifi_request_id id, 404 int net_id, // network block identifier for the matched network 405 wifi_scan_result *result, // scan result, with channel and beacon information 406 int anqp_len, // length of ANQP blob 407 byte *anqp // ANQP data, in the information_element format 408 ); 409 } wifi_passpoint_event_handler; 410 411 /* Sets a list for passpoint networks for PNO purposes; it should be matched 412 * against any passpoint networks (designated by Interworking element) found 413 * during regular PNO scan. */ 414 wifi_error wifi_set_passpoint_list(wifi_request_id id, wifi_interface_handle iface, int num, 415 wifi_passpoint_network *networks, wifi_passpoint_event_handler handler); 416 417 /* Reset passpoint network list - no Passpoint networks should be matched after this */ 418 wifi_error wifi_reset_passpoint_list(wifi_request_id id, wifi_interface_handle iface); 419 420 #endif 421