1 /** @file 2 Provides services to access PCI Configuration Space using the I/O ports 0xCF8 and 0xCFC. 3 4 This library is identical to the PCI Library, except the access method for performing PCI 5 configuration cycles must be through I/O ports 0xCF8 and 0xCFC. This library only allows 6 access to PCI Segment #0. 7 8 Copyright (c) 2006 - 2012, Intel Corporation. All rights reserved.<BR> 9 This program and the accompanying materials 10 are licensed and made available under the terms and conditions of the BSD License 11 which accompanies this distribution. The full text of the license may be found at 12 http://opensource.org/licenses/bsd-license.php 13 14 THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, 15 WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. 16 17 **/ 18 19 #ifndef __PCI_CF8_LIB_H__ 20 #define __PCI_CF8_LIB_H__ 21 22 23 /** 24 Macro that converts PCI Bus, PCI Device, PCI Function and PCI Register to an 25 address that can be passed to the PCI Library functions. 26 27 Computes an address that is compatible with the PCI Library functions. The 28 unused upper bits of Bus, Device, Function and Register are stripped prior to 29 the generation of the address. 30 31 @param Bus PCI Bus number. Range 0..255. 32 @param Device PCI Device number. Range 0..31. 33 @param Function PCI Function number. Range 0..7. 34 @param Register PCI Register number. Range 0..255. 35 36 @return The encode PCI address. 37 38 **/ 39 #define PCI_CF8_LIB_ADDRESS(Bus,Device,Function,Offset) \ 40 (((Offset) & 0xfff) | (((Function) & 0x07) << 12) | (((Device) & 0x1f) << 15) | (((Bus) & 0xff) << 20)) 41 42 /** 43 Registers a PCI device so PCI configuration registers may be accessed after 44 SetVirtualAddressMap(). 45 46 Registers the PCI device specified by Address so all the PCI configuration registers 47 associated with that PCI device may be accessed after SetVirtualAddressMap() is called. 48 49 If Address > 0x0FFFFFFF, then ASSERT(). 50 If the register specified by Address >= 0x100, then ASSERT(). 51 52 @param Address Address that encodes the PCI Bus, Device, Function and 53 Register. 54 55 @retval RETURN_SUCCESS The PCI device was registered for runtime access. 56 @retval RETURN_UNSUPPORTED An attempt was made to call this function 57 after ExitBootServices(). 58 @retval RETURN_UNSUPPORTED The resources required to access the PCI device 59 at runtime could not be mapped. 60 @retval RETURN_OUT_OF_RESOURCES There are not enough resources available to 61 complete the registration. 62 63 **/ 64 RETURN_STATUS 65 EFIAPI 66 PciCf8RegisterForRuntimeAccess ( 67 IN UINTN Address 68 ); 69 70 /** 71 Reads an 8-bit PCI configuration register. 72 73 Reads and returns the 8-bit PCI configuration register specified by Address. 74 This function must guarantee that all PCI read and write operations are 75 serialized. 76 77 If Address > 0x0FFFFFFF, then ASSERT(). 78 If the register specified by Address >= 0x100, then ASSERT(). 79 80 @param Address Address that encodes the PCI Bus, Device, Function and 81 Register. 82 83 @return The read value from the PCI configuration register. 84 85 **/ 86 UINT8 87 EFIAPI 88 PciCf8Read8 ( 89 IN UINTN Address 90 ); 91 92 /** 93 Writes an 8-bit PCI configuration register. 94 95 Writes the 8-bit PCI configuration register specified by Address with the 96 value specified by Value. Value is returned. This function must guarantee 97 that all PCI read and write operations are serialized. 98 99 If Address > 0x0FFFFFFF, then ASSERT(). 100 If the register specified by Address >= 0x100, then ASSERT(). 101 102 @param Address Address that encodes the PCI Bus, Device, Function and 103 Register. 104 @param Value The value to write. 105 106 @return The value written to the PCI configuration register. 107 108 **/ 109 UINT8 110 EFIAPI 111 PciCf8Write8 ( 112 IN UINTN Address, 113 IN UINT8 Value 114 ); 115 116 /** 117 Performs a bitwise OR of an 8-bit PCI configuration register with 118 an 8-bit value. 119 120 Reads the 8-bit PCI configuration register specified by Address, performs a 121 bitwise OR between the read result and the value specified by 122 OrData, and writes the result to the 8-bit PCI configuration register 123 specified by Address. The value written to the PCI configuration register is 124 returned. This function must guarantee that all PCI read and write operations 125 are serialized. 126 127 If Address > 0x0FFFFFFF, then ASSERT(). 128 If the register specified by Address >= 0x100, then ASSERT(). 129 130 @param Address Address that encodes the PCI Bus, Device, Function and 131 Register. 132 @param OrData The value to OR with the PCI configuration register. 133 134 @return The value written back to the PCI configuration register. 135 136 **/ 137 UINT8 138 EFIAPI 139 PciCf8Or8 ( 140 IN UINTN Address, 141 IN UINT8 OrData 142 ); 143 144 /** 145 Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit 146 value. 147 148 Reads the 8-bit PCI configuration register specified by Address, performs a 149 bitwise AND between the read result and the value specified by AndData, and 150 writes the result to the 8-bit PCI configuration register specified by 151 Address. The value written to the PCI configuration register is returned. 152 This function must guarantee that all PCI read and write operations are 153 serialized. 154 155 If Address > 0x0FFFFFFF, then ASSERT(). 156 If the register specified by Address >= 0x100, then ASSERT(). 157 158 @param Address Address that encodes the PCI Bus, Device, Function and 159 Register. 160 @param AndData The value to AND with the PCI configuration register. 161 162 @return The value written back to the PCI configuration register. 163 164 **/ 165 UINT8 166 EFIAPI 167 PciCf8And8 ( 168 IN UINTN Address, 169 IN UINT8 AndData 170 ); 171 172 /** 173 Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit 174 value, followed a bitwise OR with another 8-bit value. 175 176 Reads the 8-bit PCI configuration register specified by Address, performs a 177 bitwise AND between the read result and the value specified by AndData, 178 performs a bitwise OR between the result of the AND operation and 179 the value specified by OrData, and writes the result to the 8-bit PCI 180 configuration register specified by Address. The value written to the PCI 181 configuration register is returned. This function must guarantee that all PCI 182 read and write operations are serialized. 183 184 If Address > 0x0FFFFFFF, then ASSERT(). 185 If the register specified by Address >= 0x100, then ASSERT(). 186 187 @param Address Address that encodes the PCI Bus, Device, Function and 188 Register. 189 @param AndData The value to AND with the PCI configuration register. 190 @param OrData The value to OR with the result of the AND operation. 191 192 @return The value written back to the PCI configuration register. 193 194 **/ 195 UINT8 196 EFIAPI 197 PciCf8AndThenOr8 ( 198 IN UINTN Address, 199 IN UINT8 AndData, 200 IN UINT8 OrData 201 ); 202 203 /** 204 Reads a bit field of a PCI configuration register. 205 206 Reads the bit field in an 8-bit PCI configuration register. The bit field is 207 specified by the StartBit and the EndBit. The value of the bit field is 208 returned. 209 210 If Address > 0x0FFFFFFF, then ASSERT(). 211 If the register specified by Address >= 0x100, then ASSERT(). 212 If StartBit is greater than 7, then ASSERT(). 213 If EndBit is greater than 7, then ASSERT(). 214 If EndBit is less than StartBit, then ASSERT(). 215 216 @param Address PCI configuration register to read. 217 @param StartBit The ordinal of the least significant bit in the bit field. 218 Range 0..7. 219 @param EndBit The ordinal of the most significant bit in the bit field. 220 Range 0..7. 221 222 @return The value of the bit field read from the PCI configuration register. 223 224 **/ 225 UINT8 226 EFIAPI 227 PciCf8BitFieldRead8 ( 228 IN UINTN Address, 229 IN UINTN StartBit, 230 IN UINTN EndBit 231 ); 232 233 /** 234 Writes a bit field to a PCI configuration register. 235 236 Writes Value to the bit field of the PCI configuration register. The bit 237 field is specified by the StartBit and the EndBit. All other bits in the 238 destination PCI configuration register are preserved. The new value of the 239 8-bit register is returned. 240 241 If Address > 0x0FFFFFFF, then ASSERT(). 242 If the register specified by Address >= 0x100, then ASSERT(). 243 If StartBit is greater than 7, then ASSERT(). 244 If EndBit is greater than 7, then ASSERT(). 245 If EndBit is less than StartBit, then ASSERT(). 246 If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). 247 248 @param Address PCI configuration register to write. 249 @param StartBit The ordinal of the least significant bit in the bit field. 250 Range 0..7. 251 @param EndBit The ordinal of the most significant bit in the bit field. 252 Range 0..7. 253 @param Value New value of the bit field. 254 255 @return The value written back to the PCI configuration register. 256 257 **/ 258 UINT8 259 EFIAPI 260 PciCf8BitFieldWrite8 ( 261 IN UINTN Address, 262 IN UINTN StartBit, 263 IN UINTN EndBit, 264 IN UINT8 Value 265 ); 266 267 /** 268 Reads a bit field in an 8-bit PCI configuration, performs a bitwise OR, and 269 writes the result back to the bit field in the 8-bit port. 270 271 Reads the 8-bit PCI configuration register specified by Address, performs a 272 bitwise OR between the read result and the value specified by 273 OrData, and writes the result to the 8-bit PCI configuration register 274 specified by Address. The value written to the PCI configuration register is 275 returned. This function must guarantee that all PCI read and write operations 276 are serialized. Extra left bits in OrData are stripped. 277 278 If Address > 0x0FFFFFFF, then ASSERT(). 279 If the register specified by Address >= 0x100, then ASSERT(). 280 If StartBit is greater than 7, then ASSERT(). 281 If EndBit is greater than 7, then ASSERT(). 282 If EndBit is less than StartBit, then ASSERT(). 283 If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). 284 285 @param Address PCI configuration register to write. 286 @param StartBit The ordinal of the least significant bit in the bit field. 287 Range 0..7. 288 @param EndBit The ordinal of the most significant bit in the bit field. 289 Range 0..7. 290 @param OrData The value to OR with the PCI configuration register. 291 292 @return The value written back to the PCI configuration register. 293 294 **/ 295 UINT8 296 EFIAPI 297 PciCf8BitFieldOr8 ( 298 IN UINTN Address, 299 IN UINTN StartBit, 300 IN UINTN EndBit, 301 IN UINT8 OrData 302 ); 303 304 /** 305 Reads a bit field in an 8-bit PCI configuration register, performs a bitwise 306 AND, and writes the result back to the bit field in the 8-bit register. 307 308 Reads the 8-bit PCI configuration register specified by Address, performs a 309 bitwise AND between the read result and the value specified by AndData, and 310 writes the result to the 8-bit PCI configuration register specified by 311 Address. The value written to the PCI configuration register is returned. 312 This function must guarantee that all PCI read and write operations are 313 serialized. Extra left bits in AndData are stripped. 314 315 If Address > 0x0FFFFFFF, then ASSERT(). 316 If the register specified by Address >= 0x100, then ASSERT(). 317 If StartBit is greater than 7, then ASSERT(). 318 If EndBit is greater than 7, then ASSERT(). 319 If EndBit is less than StartBit, then ASSERT(). 320 If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). 321 322 @param Address PCI configuration register to write. 323 @param StartBit The ordinal of the least significant bit in the bit field. 324 Range 0..7. 325 @param EndBit The ordinal of the most significant bit in the bit field. 326 Range 0..7. 327 @param AndData The value to AND with the PCI configuration register. 328 329 @return The value written back to the PCI configuration register. 330 331 **/ 332 UINT8 333 EFIAPI 334 PciCf8BitFieldAnd8 ( 335 IN UINTN Address, 336 IN UINTN StartBit, 337 IN UINTN EndBit, 338 IN UINT8 AndData 339 ); 340 341 /** 342 Reads a bit field in an 8-bit port, performs a bitwise AND followed by a 343 bitwise OR, and writes the result back to the bit field in the 344 8-bit port. 345 346 Reads the 8-bit PCI configuration register specified by Address, performs a 347 bitwise AND followed by a bitwise OR between the read result and 348 the value specified by AndData, and writes the result to the 8-bit PCI 349 configuration register specified by Address. The value written to the PCI 350 configuration register is returned. This function must guarantee that all PCI 351 read and write operations are serialized. Extra left bits in both AndData and 352 OrData are stripped. 353 354 If Address > 0x0FFFFFFF, then ASSERT(). 355 If the register specified by Address >= 0x100, then ASSERT(). 356 If StartBit is greater than 7, then ASSERT(). 357 If EndBit is greater than 7, then ASSERT(). 358 If EndBit is less than StartBit, then ASSERT(). 359 If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). 360 If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). 361 362 @param Address PCI configuration register to write. 363 @param StartBit The ordinal of the least significant bit in the bit field. 364 Range 0..7. 365 @param EndBit The ordinal of the most significant bit in the bit field. 366 Range 0..7. 367 @param AndData The value to AND with the PCI configuration register. 368 @param OrData The value to OR with the result of the AND operation. 369 370 @return The value written back to the PCI configuration register. 371 372 **/ 373 UINT8 374 EFIAPI 375 PciCf8BitFieldAndThenOr8 ( 376 IN UINTN Address, 377 IN UINTN StartBit, 378 IN UINTN EndBit, 379 IN UINT8 AndData, 380 IN UINT8 OrData 381 ); 382 383 /** 384 Reads a 16-bit PCI configuration register. 385 386 Reads and returns the 16-bit PCI configuration register specified by Address. 387 This function must guarantee that all PCI read and write operations are 388 serialized. 389 390 If Address > 0x0FFFFFFF, then ASSERT(). 391 If Address is not aligned on a 16-bit boundary, then ASSERT(). 392 If the register specified by Address >= 0x100, then ASSERT(). 393 394 @param Address Address that encodes the PCI Bus, Device, Function and 395 Register. 396 397 @return The read value from the PCI configuration register. 398 399 **/ 400 UINT16 401 EFIAPI 402 PciCf8Read16 ( 403 IN UINTN Address 404 ); 405 406 /** 407 Writes a 16-bit PCI configuration register. 408 409 Writes the 16-bit PCI configuration register specified by Address with the 410 value specified by Value. Value is returned. This function must guarantee 411 that all PCI read and write operations are serialized. 412 413 If Address > 0x0FFFFFFF, then ASSERT(). 414 If Address is not aligned on a 16-bit boundary, then ASSERT(). 415 If the register specified by Address >= 0x100, then ASSERT(). 416 417 @param Address Address that encodes the PCI Bus, Device, Function and 418 Register. 419 @param Value The value to write. 420 421 @return The value written to the PCI configuration register. 422 423 **/ 424 UINT16 425 EFIAPI 426 PciCf8Write16 ( 427 IN UINTN Address, 428 IN UINT16 Value 429 ); 430 431 /** 432 Performs a bitwise OR of a 16-bit PCI configuration register with 433 a 16-bit value. 434 435 Reads the 16-bit PCI configuration register specified by Address, performs a 436 bitwise OR between the read result and the value specified by 437 OrData, and writes the result to the 16-bit PCI configuration register 438 specified by Address. The value written to the PCI configuration register is 439 returned. This function must guarantee that all PCI read and write operations 440 are serialized. 441 442 If Address > 0x0FFFFFFF, then ASSERT(). 443 If Address is not aligned on a 16-bit boundary, then ASSERT(). 444 If the register specified by Address >= 0x100, then ASSERT(). 445 446 @param Address Address that encodes the PCI Bus, Device, Function and 447 Register. 448 @param OrData The value to OR with the PCI configuration register. 449 450 @return The value written back to the PCI configuration register. 451 452 **/ 453 UINT16 454 EFIAPI 455 PciCf8Or16 ( 456 IN UINTN Address, 457 IN UINT16 OrData 458 ); 459 460 /** 461 Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit 462 value. 463 464 Reads the 16-bit PCI configuration register specified by Address, performs a 465 bitwise AND between the read result and the value specified by AndData, and 466 writes the result to the 16-bit PCI configuration register specified by 467 Address. The value written to the PCI configuration register is returned. 468 This function must guarantee that all PCI read and write operations are 469 serialized. 470 471 If Address > 0x0FFFFFFF, then ASSERT(). 472 If Address is not aligned on a 16-bit boundary, then ASSERT(). 473 If the register specified by Address >= 0x100, then ASSERT(). 474 475 @param Address Address that encodes the PCI Bus, Device, Function and 476 Register. 477 @param AndData The value to AND with the PCI configuration register. 478 479 @return The value written back to the PCI configuration register. 480 481 **/ 482 UINT16 483 EFIAPI 484 PciCf8And16 ( 485 IN UINTN Address, 486 IN UINT16 AndData 487 ); 488 489 /** 490 Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit 491 value, followed a bitwise OR with another 16-bit value. 492 493 Reads the 16-bit PCI configuration register specified by Address, performs a 494 bitwise AND between the read result and the value specified by AndData, 495 performs a bitwise OR between the result of the AND operation and 496 the value specified by OrData, and writes the result to the 16-bit PCI 497 configuration register specified by Address. The value written to the PCI 498 configuration register is returned. This function must guarantee that all PCI 499 read and write operations are serialized. 500 501 If Address > 0x0FFFFFFF, then ASSERT(). 502 If Address is not aligned on a 16-bit boundary, then ASSERT(). 503 If the register specified by Address >= 0x100, then ASSERT(). 504 505 @param Address Address that encodes the PCI Bus, Device, Function and 506 Register. 507 @param AndData The value to AND with the PCI configuration register. 508 @param OrData The value to OR with the result of the AND operation. 509 510 @return The value written back to the PCI configuration register. 511 512 **/ 513 UINT16 514 EFIAPI 515 PciCf8AndThenOr16 ( 516 IN UINTN Address, 517 IN UINT16 AndData, 518 IN UINT16 OrData 519 ); 520 521 /** 522 Reads a bit field of a PCI configuration register. 523 524 Reads the bit field in a 16-bit PCI configuration register. The bit field is 525 specified by the StartBit and the EndBit. The value of the bit field is 526 returned. 527 528 If Address > 0x0FFFFFFF, then ASSERT(). 529 If Address is not aligned on a 16-bit boundary, then ASSERT(). 530 If the register specified by Address >= 0x100, then ASSERT(). 531 If StartBit is greater than 15, then ASSERT(). 532 If EndBit is greater than 15, then ASSERT(). 533 If EndBit is less than StartBit, then ASSERT(). 534 535 @param Address PCI configuration register to read. 536 @param StartBit The ordinal of the least significant bit in the bit field. 537 Range 0..15. 538 @param EndBit The ordinal of the most significant bit in the bit field. 539 Range 0..15. 540 541 @return The value of the bit field read from the PCI configuration register. 542 543 **/ 544 UINT16 545 EFIAPI 546 PciCf8BitFieldRead16 ( 547 IN UINTN Address, 548 IN UINTN StartBit, 549 IN UINTN EndBit 550 ); 551 552 /** 553 Writes a bit field to a PCI configuration register. 554 555 Writes Value to the bit field of the PCI configuration register. The bit 556 field is specified by the StartBit and the EndBit. All other bits in the 557 destination PCI configuration register are preserved. The new value of the 558 16-bit register is returned. 559 560 If Address > 0x0FFFFFFF, then ASSERT(). 561 If Address is not aligned on a 16-bit boundary, then ASSERT(). 562 If the register specified by Address >= 0x100, then ASSERT(). 563 If StartBit is greater than 15, then ASSERT(). 564 If EndBit is greater than 15, then ASSERT(). 565 If EndBit is less than StartBit, then ASSERT(). 566 If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). 567 568 @param Address PCI configuration register to write. 569 @param StartBit The ordinal of the least significant bit in the bit field. 570 Range 0..15. 571 @param EndBit The ordinal of the most significant bit in the bit field. 572 Range 0..15. 573 @param Value New value of the bit field. 574 575 @return The value written back to the PCI configuration register. 576 577 **/ 578 UINT16 579 EFIAPI 580 PciCf8BitFieldWrite16 ( 581 IN UINTN Address, 582 IN UINTN StartBit, 583 IN UINTN EndBit, 584 IN UINT16 Value 585 ); 586 587 /** 588 Reads a bit field in a 16-bit PCI configuration, performs a bitwise OR, and 589 writes the result back to the bit field in the 16-bit port. 590 591 Reads the 16-bit PCI configuration register specified by Address, performs a 592 bitwise OR between the read result and the value specified by 593 OrData, and writes the result to the 16-bit PCI configuration register 594 specified by Address. The value written to the PCI configuration register is 595 returned. This function must guarantee that all PCI read and write operations 596 are serialized. Extra left bits in OrData are stripped. 597 598 If Address > 0x0FFFFFFF, then ASSERT(). 599 If Address is not aligned on a 16-bit boundary, then ASSERT(). 600 If the register specified by Address >= 0x100, then ASSERT(). 601 If StartBit is greater than 15, then ASSERT(). 602 If EndBit is greater than 15, then ASSERT(). 603 If EndBit is less than StartBit, then ASSERT(). 604 If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). 605 606 @param Address PCI configuration register to write. 607 @param StartBit The ordinal of the least significant bit in the bit field. 608 Range 0..15. 609 @param EndBit The ordinal of the most significant bit in the bit field. 610 Range 0..15. 611 @param OrData The value to OR with the PCI configuration register. 612 613 @return The value written back to the PCI configuration register. 614 615 **/ 616 UINT16 617 EFIAPI 618 PciCf8BitFieldOr16 ( 619 IN UINTN Address, 620 IN UINTN StartBit, 621 IN UINTN EndBit, 622 IN UINT16 OrData 623 ); 624 625 /** 626 Reads a bit field in a 16-bit PCI configuration register, performs a bitwise 627 AND, and writes the result back to the bit field in the 16-bit register. 628 629 Reads the 16-bit PCI configuration register specified by Address, performs a 630 bitwise AND between the read result and the value specified by AndData, and 631 writes the result to the 16-bit PCI configuration register specified by 632 Address. The value written to the PCI configuration register is returned. 633 This function must guarantee that all PCI read and write operations are 634 serialized. Extra left bits in AndData are stripped. 635 636 If Address > 0x0FFFFFFF, then ASSERT(). 637 If Address is not aligned on a 16-bit boundary, then ASSERT(). 638 If the register specified by Address >= 0x100, then ASSERT(). 639 If StartBit is greater than 15, then ASSERT(). 640 If EndBit is greater than 15, then ASSERT(). 641 If EndBit is less than StartBit, then ASSERT(). 642 If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). 643 644 @param Address PCI configuration register to write. 645 @param StartBit The ordinal of the least significant bit in the bit field. 646 Range 0..15. 647 @param EndBit The ordinal of the most significant bit in the bit field. 648 Range 0..15. 649 @param AndData The value to AND with the PCI configuration register. 650 651 @return The value written back to the PCI configuration register. 652 653 **/ 654 UINT16 655 EFIAPI 656 PciCf8BitFieldAnd16 ( 657 IN UINTN Address, 658 IN UINTN StartBit, 659 IN UINTN EndBit, 660 IN UINT16 AndData 661 ); 662 663 /** 664 Reads a bit field in a 16-bit port, performs a bitwise AND followed by a 665 bitwise OR, and writes the result back to the bit field in the 666 16-bit port. 667 668 Reads the 16-bit PCI configuration register specified by Address, performs a 669 bitwise AND followed by a bitwise OR between the read result and 670 the value specified by AndData, and writes the result to the 16-bit PCI 671 configuration register specified by Address. The value written to the PCI 672 configuration register is returned. This function must guarantee that all PCI 673 read and write operations are serialized. Extra left bits in both AndData and 674 OrData are stripped. 675 676 If Address > 0x0FFFFFFF, then ASSERT(). 677 If Address is not aligned on a 16-bit boundary, then ASSERT(). 678 If the register specified by Address >= 0x100, then ASSERT(). 679 If StartBit is greater than 15, then ASSERT(). 680 If EndBit is greater than 15, then ASSERT(). 681 If EndBit is less than StartBit, then ASSERT(). 682 If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). 683 If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). 684 685 @param Address PCI configuration register to write. 686 @param StartBit The ordinal of the least significant bit in the bit field. 687 Range 0..15. 688 @param EndBit The ordinal of the most significant bit in the bit field. 689 Range 0..15. 690 @param AndData The value to AND with the PCI configuration register. 691 @param OrData The value to OR with the result of the AND operation. 692 693 @return The value written back to the PCI configuration register. 694 695 **/ 696 UINT16 697 EFIAPI 698 PciCf8BitFieldAndThenOr16 ( 699 IN UINTN Address, 700 IN UINTN StartBit, 701 IN UINTN EndBit, 702 IN UINT16 AndData, 703 IN UINT16 OrData 704 ); 705 706 /** 707 Reads a 32-bit PCI configuration register. 708 709 Reads and returns the 32-bit PCI configuration register specified by Address. 710 This function must guarantee that all PCI read and write operations are 711 serialized. 712 713 If Address > 0x0FFFFFFF, then ASSERT(). 714 If Address is not aligned on a 32-bit boundary, then ASSERT(). 715 If the register specified by Address >= 0x100, then ASSERT(). 716 717 @param Address Address that encodes the PCI Bus, Device, Function and 718 Register. 719 720 @return The read value from the PCI configuration register. 721 722 **/ 723 UINT32 724 EFIAPI 725 PciCf8Read32 ( 726 IN UINTN Address 727 ); 728 729 /** 730 Writes a 32-bit PCI configuration register. 731 732 Writes the 32-bit PCI configuration register specified by Address with the 733 value specified by Value. Value is returned. This function must guarantee 734 that all PCI read and write operations are serialized. 735 736 If Address > 0x0FFFFFFF, then ASSERT(). 737 If Address is not aligned on a 32-bit boundary, then ASSERT(). 738 If the register specified by Address >= 0x100, then ASSERT(). 739 740 @param Address Address that encodes the PCI Bus, Device, Function and 741 Register. 742 @param Value The value to write. 743 744 @return The value written to the PCI configuration register. 745 746 **/ 747 UINT32 748 EFIAPI 749 PciCf8Write32 ( 750 IN UINTN Address, 751 IN UINT32 Value 752 ); 753 754 /** 755 Performs a bitwise OR of a 32-bit PCI configuration register with 756 a 32-bit value. 757 758 Reads the 32-bit PCI configuration register specified by Address, performs a 759 bitwise OR between the read result and the value specified by 760 OrData, and writes the result to the 32-bit PCI configuration register 761 specified by Address. The value written to the PCI configuration register is 762 returned. This function must guarantee that all PCI read and write operations 763 are serialized. 764 765 If Address > 0x0FFFFFFF, then ASSERT(). 766 If Address is not aligned on a 32-bit boundary, then ASSERT(). 767 If the register specified by Address >= 0x100, then ASSERT(). 768 769 @param Address Address that encodes the PCI Bus, Device, Function and 770 Register. 771 @param OrData The value to OR with the PCI configuration register. 772 773 @return The value written back to the PCI configuration register. 774 775 **/ 776 UINT32 777 EFIAPI 778 PciCf8Or32 ( 779 IN UINTN Address, 780 IN UINT32 OrData 781 ); 782 783 /** 784 Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit 785 value. 786 787 Reads the 32-bit PCI configuration register specified by Address, performs a 788 bitwise AND between the read result and the value specified by AndData, and 789 writes the result to the 32-bit PCI configuration register specified by 790 Address. The value written to the PCI configuration register is returned. 791 This function must guarantee that all PCI read and write operations are 792 serialized. 793 794 If Address > 0x0FFFFFFF, then ASSERT(). 795 If Address is not aligned on a 32-bit boundary, then ASSERT(). 796 If the register specified by Address >= 0x100, then ASSERT(). 797 798 @param Address Address that encodes the PCI Bus, Device, Function and 799 Register. 800 @param AndData The value to AND with the PCI configuration register. 801 802 @return The value written back to the PCI configuration register. 803 804 **/ 805 UINT32 806 EFIAPI 807 PciCf8And32 ( 808 IN UINTN Address, 809 IN UINT32 AndData 810 ); 811 812 /** 813 Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit 814 value, followed a bitwise OR with another 32-bit value. 815 816 Reads the 32-bit PCI configuration register specified by Address, performs a 817 bitwise AND between the read result and the value specified by AndData, 818 performs a bitwise OR between the result of the AND operation and 819 the value specified by OrData, and writes the result to the 32-bit PCI 820 configuration register specified by Address. The value written to the PCI 821 configuration register is returned. This function must guarantee that all PCI 822 read and write operations are serialized. 823 824 If Address > 0x0FFFFFFF, then ASSERT(). 825 If Address is not aligned on a 32-bit boundary, then ASSERT(). 826 If the register specified by Address >= 0x100, then ASSERT(). 827 828 @param Address Address that encodes the PCI Bus, Device, Function and 829 Register. 830 @param AndData The value to AND with the PCI configuration register. 831 @param OrData The value to OR with the result of the AND operation. 832 833 @return The value written back to the PCI configuration register. 834 835 **/ 836 UINT32 837 EFIAPI 838 PciCf8AndThenOr32 ( 839 IN UINTN Address, 840 IN UINT32 AndData, 841 IN UINT32 OrData 842 ); 843 844 /** 845 Reads a bit field of a PCI configuration register. 846 847 Reads the bit field in a 32-bit PCI configuration register. The bit field is 848 specified by the StartBit and the EndBit. The value of the bit field is 849 returned. 850 851 If Address > 0x0FFFFFFF, then ASSERT(). 852 If Address is not aligned on a 32-bit boundary, then ASSERT(). 853 If the register specified by Address >= 0x100, then ASSERT(). 854 If StartBit is greater than 31, then ASSERT(). 855 If EndBit is greater than 31, then ASSERT(). 856 If EndBit is less than StartBit, then ASSERT(). 857 858 @param Address PCI configuration register to read. 859 @param StartBit The ordinal of the least significant bit in the bit field. 860 Range 0..31. 861 @param EndBit The ordinal of the most significant bit in the bit field. 862 Range 0..31. 863 864 @return The value of the bit field read from the PCI configuration register. 865 866 **/ 867 UINT32 868 EFIAPI 869 PciCf8BitFieldRead32 ( 870 IN UINTN Address, 871 IN UINTN StartBit, 872 IN UINTN EndBit 873 ); 874 875 /** 876 Writes a bit field to a PCI configuration register. 877 878 Writes Value to the bit field of the PCI configuration register. The bit 879 field is specified by the StartBit and the EndBit. All other bits in the 880 destination PCI configuration register are preserved. The new value of the 881 32-bit register is returned. 882 883 If Address > 0x0FFFFFFF, then ASSERT(). 884 If Address is not aligned on a 32-bit boundary, then ASSERT(). 885 If the register specified by Address >= 0x100, then ASSERT(). 886 If StartBit is greater than 31, then ASSERT(). 887 If EndBit is greater than 31, then ASSERT(). 888 If EndBit is less than StartBit, then ASSERT(). 889 If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). 890 891 @param Address PCI configuration register to write. 892 @param StartBit The ordinal of the least significant bit in the bit field. 893 Range 0..31. 894 @param EndBit The ordinal of the most significant bit in the bit field. 895 Range 0..31. 896 @param Value New value of the bit field. 897 898 @return The value written back to the PCI configuration register. 899 900 **/ 901 UINT32 902 EFIAPI 903 PciCf8BitFieldWrite32 ( 904 IN UINTN Address, 905 IN UINTN StartBit, 906 IN UINTN EndBit, 907 IN UINT32 Value 908 ); 909 910 /** 911 Reads a bit field in a 32-bit PCI configuration, performs a bitwise OR, and 912 writes the result back to the bit field in the 32-bit port. 913 914 Reads the 32-bit PCI configuration register specified by Address, performs a 915 bitwise OR between the read result and the value specified by 916 OrData, and writes the result to the 32-bit PCI configuration register 917 specified by Address. The value written to the PCI configuration register is 918 returned. This function must guarantee that all PCI read and write operations 919 are serialized. Extra left bits in OrData are stripped. 920 921 If Address > 0x0FFFFFFF, then ASSERT(). 922 If Address is not aligned on a 32-bit boundary, then ASSERT(). 923 If the register specified by Address >= 0x100, then ASSERT(). 924 If StartBit is greater than 31, then ASSERT(). 925 If EndBit is greater than 31, then ASSERT(). 926 If EndBit is less than StartBit, then ASSERT(). 927 If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). 928 929 @param Address PCI configuration register to write. 930 @param StartBit The ordinal of the least significant bit in the bit field. 931 Range 0..31. 932 @param EndBit The ordinal of the most significant bit in the bit field. 933 Range 0..31. 934 @param OrData The value to OR with the PCI configuration register. 935 936 @return The value written back to the PCI configuration register. 937 938 **/ 939 UINT32 940 EFIAPI 941 PciCf8BitFieldOr32 ( 942 IN UINTN Address, 943 IN UINTN StartBit, 944 IN UINTN EndBit, 945 IN UINT32 OrData 946 ); 947 948 /** 949 Reads a bit field in a 32-bit PCI configuration register, performs a bitwise 950 AND, and writes the result back to the bit field in the 32-bit register. 951 952 Reads the 32-bit PCI configuration register specified by Address, performs a 953 bitwise AND between the read result and the value specified by AndData, and 954 writes the result to the 32-bit PCI configuration register specified by 955 Address. The value written to the PCI configuration register is returned. 956 This function must guarantee that all PCI read and write operations are 957 serialized. Extra left bits in AndData are stripped. 958 959 If Address > 0x0FFFFFFF, then ASSERT(). 960 If Address is not aligned on a 32-bit boundary, then ASSERT(). 961 If the register specified by Address >= 0x100, then ASSERT(). 962 If StartBit is greater than 31, then ASSERT(). 963 If EndBit is greater than 31, then ASSERT(). 964 If EndBit is less than StartBit, then ASSERT(). 965 If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). 966 967 @param Address PCI configuration register to write. 968 @param StartBit The ordinal of the least significant bit in the bit field. 969 Range 0..31. 970 @param EndBit The ordinal of the most significant bit in the bit field. 971 Range 0..31. 972 @param AndData The value to AND with the PCI configuration register. 973 974 @return The value written back to the PCI configuration register. 975 976 **/ 977 UINT32 978 EFIAPI 979 PciCf8BitFieldAnd32 ( 980 IN UINTN Address, 981 IN UINTN StartBit, 982 IN UINTN EndBit, 983 IN UINT32 AndData 984 ); 985 986 /** 987 Reads a bit field in a 32-bit port, performs a bitwise AND followed by a 988 bitwise OR, and writes the result back to the bit field in the 989 32-bit port. 990 991 Reads the 32-bit PCI configuration register specified by Address, performs a 992 bitwise AND followed by a bitwise OR between the read result and 993 the value specified by AndData, and writes the result to the 32-bit PCI 994 configuration register specified by Address. The value written to the PCI 995 configuration register is returned. This function must guarantee that all PCI 996 read and write operations are serialized. Extra left bits in both AndData and 997 OrData are stripped. 998 999 If Address > 0x0FFFFFFF, then ASSERT(). 1000 If Address is not aligned on a 32-bit boundary, then ASSERT(). 1001 If the register specified by Address >= 0x100, then ASSERT(). 1002 If StartBit is greater than 31, then ASSERT(). 1003 If EndBit is greater than 31, then ASSERT(). 1004 If EndBit is less than StartBit, then ASSERT(). 1005 If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). 1006 If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). 1007 1008 @param Address PCI configuration register to write. 1009 @param StartBit The ordinal of the least significant bit in the bit field. 1010 Range 0..31. 1011 @param EndBit The ordinal of the most significant bit in the bit field. 1012 Range 0..31. 1013 @param AndData The value to AND with the PCI configuration register. 1014 @param OrData The value to OR with the result of the AND operation. 1015 1016 @return The value written back to the PCI configuration register. 1017 1018 **/ 1019 UINT32 1020 EFIAPI 1021 PciCf8BitFieldAndThenOr32 ( 1022 IN UINTN Address, 1023 IN UINTN StartBit, 1024 IN UINTN EndBit, 1025 IN UINT32 AndData, 1026 IN UINT32 OrData 1027 ); 1028 1029 /** 1030 Reads a range of PCI configuration registers into a caller supplied buffer. 1031 1032 Reads the range of PCI configuration registers specified by StartAddress and 1033 Size into the buffer specified by Buffer. This function only allows the PCI 1034 configuration registers from a single PCI function to be read. Size is 1035 returned. When possible 32-bit PCI configuration read cycles are used to read 1036 from StartAdress to StartAddress + Size. Due to alignment restrictions, 8-bit 1037 and 16-bit PCI configuration read cycles may be used at the beginning and the 1038 end of the range. 1039 1040 If StartAddress > 0x0FFFFFFF, then ASSERT(). 1041 If the register specified by StartAddress >= 0x100, then ASSERT(). 1042 If ((StartAddress & 0xFFF) + Size) > 0x100, then ASSERT(). 1043 If Size > 0 and Buffer is NULL, then ASSERT(). 1044 1045 @param StartAddress Starting address that encodes the PCI Bus, Device, 1046 Function and Register. 1047 @param Size Size in bytes of the transfer. 1048 @param Buffer Pointer to a buffer receiving the data read. 1049 1050 @return Size read from StartAddress. 1051 1052 **/ 1053 UINTN 1054 EFIAPI 1055 PciCf8ReadBuffer ( 1056 IN UINTN StartAddress, 1057 IN UINTN Size, 1058 OUT VOID *Buffer 1059 ); 1060 1061 /** 1062 Copies the data in a caller supplied buffer to a specified range of PCI 1063 configuration space. 1064 1065 Writes the range of PCI configuration registers specified by StartAddress and 1066 Size from the buffer specified by Buffer. This function only allows the PCI 1067 configuration registers from a single PCI function to be written. Size is 1068 returned. When possible 32-bit PCI configuration write cycles are used to 1069 write from StartAdress to StartAddress + Size. Due to alignment restrictions, 1070 8-bit and 16-bit PCI configuration write cycles may be used at the beginning 1071 and the end of the range. 1072 1073 If StartAddress > 0x0FFFFFFF, then ASSERT(). 1074 If the register specified by StartAddress >= 0x100, then ASSERT(). 1075 If ((StartAddress & 0xFFF) + Size) > 0x100, then ASSERT(). 1076 If Size > 0 and Buffer is NULL, then ASSERT(). 1077 1078 @param StartAddress Starting address that encodes the PCI Bus, Device, 1079 Function and Register. 1080 @param Size Size in bytes of the transfer. 1081 @param Buffer Pointer to a buffer containing the data to write. 1082 1083 @return Size written to StartAddress. 1084 1085 **/ 1086 UINTN 1087 EFIAPI 1088 PciCf8WriteBuffer ( 1089 IN UINTN StartAddress, 1090 IN UINTN Size, 1091 IN VOID *Buffer 1092 ); 1093 1094 #endif 1095