1 /** @file
2   This file provides a definition of the EFI IPv4 Configuration II
3   Protocol.
4 
5 Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
6 This program and the accompanying materials
7 are licensed and made available under the terms and conditions of the BSD License
8 which accompanies this distribution.  The full text of the license may be found at<BR>
9 http://opensource.org/licenses/bsd-license.php
10 
11 THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
12 WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
13 
14 @par Revision Reference:
15 This Protocol is introduced in UEFI Specification 2.5
16 
17 **/
18 #ifndef __EFI_IP4CONFIG2_PROTOCOL_H__
19 #define __EFI_IP4CONFIG2_PROTOCOL_H__
20 
21 #include <Protocol/Ip4.h>
22 
23 #define EFI_IP4_CONFIG2_PROTOCOL_GUID \
24   { \
25     0x5b446ed1, 0xe30b, 0x4faa, {0x87, 0x1a, 0x36, 0x54, 0xec, 0xa3, 0x60, 0x80 } \
26   }
27 
28 typedef struct _EFI_IP4_CONFIG2_PROTOCOL EFI_IP4_CONFIG2_PROTOCOL;
29 
30 
31 ///
32 /// EFI_IP4_CONFIG2_DATA_TYPE
33 ///
34 typedef enum {
35   ///
36   /// The interface information of the communication device this EFI
37   /// IPv4 Configuration II Protocol instance manages. This type of
38   /// data is read only. The corresponding Data is of type
39   /// EFI_IP4_CONFIG2_INTERFACE_INFO.
40   ///
41   Ip4Config2DataTypeInterfaceInfo,
42   ///
43   /// The general configuration policy for the EFI IPv4 network stack
44   /// running on the communication device this EFI IPv4
45   /// Configuration II Protocol instance manages. The policy will
46   /// affect other configuration settings. The corresponding Data is of
47   /// type EFI_IP4_CONFIG2_POLICY.
48   ///
49   Ip4Config2DataTypePolicy,
50   ///
51   /// The station addresses set manually for the EFI IPv4 network
52   /// stack. It is only configurable when the policy is
53   /// Ip4Config2PolicyStatic. The corresponding Data is of
54   /// type EFI_IP4_CONFIG2_MANUAL_ADDRESS.
55   ///
56   Ip4Config2DataTypeManualAddress,
57   ///
58   /// The gateway addresses set manually for the EFI IPv4 network
59   /// stack running on the communication device this EFI IPv4
60   /// Configuration II Protocol manages. It is not configurable when
61   /// the policy is Ip4Config2PolicyDhcp. The gateway
62   /// addresses must be unicast IPv4 addresses. The corresponding
63   /// Data is a pointer to an array of EFI_IPv4_ADDRESS instances.
64   ///
65   Ip4Config2DataTypeGateway,
66   ///
67   /// The DNS server list for the EFI IPv4 network stack running on
68   /// the communication device this EFI IPv4 Configuration II
69   /// Protocol manages. It is not configurable when the policy is
70   /// Ip4Config2PolicyDhcp. The DNS server addresses must be
71   /// unicast IPv4 addresses. The corresponding Data is a pointer to
72   /// an array of EFI_IPv4_ADDRESS instances.
73   ///
74   Ip4Config2DataTypeDnsServer,
75   Ip4Config2DataTypeMaximum
76 } EFI_IP4_CONFIG2_DATA_TYPE;
77 
78 ///
79 /// EFI_IP4_CONFIG2_INTERFACE_INFO
80 ///
81 typedef struct {
82   ///
83   /// The name of the interface. It is a NULL-terminated Unicode string.
84   ///
85   CHAR16                Name[32];
86   ///
87   /// The interface type of the network interface. See RFC 1700,
88   /// section "Number Hardware Type".
89   ///
90   UINT8                 IfType;
91   ///
92   /// The size, in bytes, of the network interface's hardware address.
93   ///
94   UINT32                HwAddressSize;
95   ///
96   /// The hardware address for the network interface.
97   ///
98   EFI_MAC_ADDRESS       HwAddress;
99   ///
100   /// The station IPv4 address of this EFI IPv4 network stack.
101   ///
102   EFI_IPv4_ADDRESS      StationAddress;
103   ///
104   /// The subnet address mask that is associated with the station address.
105   ///
106   EFI_IPv4_ADDRESS      SubnetMask;
107   ///
108   /// Size of the following RouteTable, in bytes. May be zero.
109   ///
110   UINT32                RouteTableSize;
111   ///
112   /// The route table of the IPv4 network stack runs on this interface.
113   /// Set to NULL if RouteTableSize is zero. Type EFI_IP4_ROUTE_TABLE is defined in
114   /// EFI_IP4_PROTOCOL.GetModeData().
115   ///
116   EFI_IP4_ROUTE_TABLE   *RouteTable     OPTIONAL;
117 } EFI_IP4_CONFIG2_INTERFACE_INFO;
118 
119 ///
120 /// EFI_IP4_CONFIG2_POLICY
121 ///
122 typedef enum {
123   ///
124   /// Under this policy, the Ip4Config2DataTypeManualAddress,
125   /// Ip4Config2DataTypeGateway and Ip4Config2DataTypeDnsServer configuration
126   /// data are required to be set manually. The EFI IPv4 Protocol will get all
127   /// required configuration such as IPv4 address, subnet mask and
128   /// gateway settings from the EFI IPv4 Configuration II protocol.
129   ///
130   Ip4Config2PolicyStatic,
131   ///
132   /// Under this policy, the Ip4Config2DataTypeManualAddress,
133   /// Ip4Config2DataTypeGateway and Ip4Config2DataTypeDnsServer configuration data are
134   /// not allowed to set via SetData(). All of these configurations are retrieved from DHCP
135   /// server or other auto-configuration mechanism.
136   ///
137   Ip4Config2PolicyDhcp,
138   Ip4Config2PolicyMax
139 } EFI_IP4_CONFIG2_POLICY;
140 
141 ///
142 /// EFI_IP4_CONFIG2_MANUAL_ADDRESS
143 ///
144 typedef struct {
145   ///
146   /// The IPv4 unicast address.
147   ///
148   EFI_IPv4_ADDRESS        Address;
149   ///
150   /// The subnet mask.
151   ///
152   EFI_IPv4_ADDRESS        SubnetMask;
153 } EFI_IP4_CONFIG2_MANUAL_ADDRESS;
154 
155 /**
156   Set the configuration for the EFI IPv4 network stack running on the communication device this EFI
157   IPv4 Configuration II Protocol instance manages.
158 
159   This function is used to set the configuration data of type DataType for the EFI IPv4 network stack
160   running on the communication device this EFI IPv4 Configuration II Protocol instance manages.
161   The successfully configured data is valid after system reset or power-off.
162   The DataSize is used to calculate the count of structure instances in the Data for some
163   DataType that multiple structure instances are allowed.
164   This function is always non-blocking. When setting some typeof configuration data, an
165   asynchronous process is invoked to check the correctness of the data, such as doing address conflict
166   detection on the manually set local IPv4 address. EFI_NOT_READY is returned immediately to
167   indicate that such an asynchronous process is invoked and the process is not finished yet. The caller
168   willing to get the result of the asynchronous process is required to call RegisterDataNotify()
169   to register an event on the specified configuration data. Once the event is signaled, the caller can call
170   GetData()to get back the configuration data in order to know the result. For other types of
171   configuration data that do not require an asynchronous configuration process, the result of the
172   operation is immediately returned.
173 
174   @param[in]   This               Pointer to the EFI_IP4_CONFIG2_PROTOCOL instance.
175   @param[in]   DataType           The type of data to set.
176   @param[in]   DataSize           Size of the buffer pointed to by Data in bytes.
177   @param[in]   Data               The data buffer to set. The type ofthe data buffer is associated
178                                   with the DataType.
179 
180   @retval EFI_SUCCESS             The specified configuration data for the EFI IPv4 network stack is set
181                                   successfully.
182   @retval EFI_INVALID_PARAMETER   One or more of the following are TRUE:
183                                   This is NULL.
184                                   Data is NULL.
185                                   One or more fields in Data do not match the requirement of the data type
186                                   indicated by DataType.
187   @retval EFI_WRITE_PROTECTED     The specified configuration data is read-only or the specified configuration
188                                   data can not be set under the current policy.
189   @retval EFI_ACCESS_DENIED       Another set operation on the specified configuration data is already in process.
190   @retval EFI_NOT_READY           An asynchronous process is invoked to set the specified configuration data and
191                                   the process is not finished yet.
192   @retval EFI_BAD_BUFFER_SIZE     The DataSize does not match the size of the type indicated by DataType.
193   @retval EFI_UNSUPPORTED         This DataType is not supported.
194   @retval EFI_OUT_OF_RESOURCES    Required system resources could not be allocated.
195   @retval EFI_DEVICE_ERROR        An unexpected system error or network error occurred.
196 **/
197 typedef
198 EFI_STATUS
199 (EFIAPI *EFI_IP4_CONFIG2_SET_DATA) (
200   IN EFI_IP4_CONFIG2_PROTOCOL   *This,
201   IN EFI_IP4_CONFIG2_DATA_TYPE  DataType,
202   IN UINTN                      DataSize,
203   IN VOID                       *Data
204   );
205 
206 /**
207   Get the configuration data for the EFI IPv4 network stack running on the communication device this
208   EFI IPv4 Configuration II Protocol instance manages.
209 
210   This function returns the configuration data of type DataType for the EFI IPv4 network stack
211   running on the communication device this EFI IPv4 Configuration II Protocol instance manages.
212   The caller is responsible for allocating the buffer usedto return the specified configuration data and
213   the required size will be returned to the caller if the size of the buffer is too small.
214   EFI_NOT_READY is returned if the specified configuration data is not ready due to an already in
215   progress asynchronous configuration process. The caller can call RegisterDataNotify() to
216   register an event on the specified configuration data. Once the asynchronous configuration process is
217   finished, the event will be signaled and a subsequent GetData() call will return the specified
218   configuration data.
219 
220   @param[in]   This               Pointer to the EFI_IP4_CONFIG2_PROTOCOL instance.
221   @param[in]   DataType           The type of data to get.
222   @param[out]  DataSize           On input, in bytes, the size of Data. On output, in bytes, the size
223                                   of buffer required to store the specified configuration data.
224   @param[in]   Data               The data buffer in which the configuration data is returned. The
225                                   type of the data buffer is associated with the DataType. Ignored
226                                   if DataSize is 0.
227 
228   @retval EFI_SUCCESS             The specified configuration data is got successfully.
229   @retval EFI_INVALID_PARAMETER   One or more of the followings are TRUE:
230                                   This is NULL.
231                                   DataSize is NULL.
232                                   Data is NULL if *DataSizeis not zero.
233   @retval EFI_BUFFER_TOO_SMALL    The size of Data is too small for the specified configuration data
234                                   and the required size is returned in DataSize.
235   @retval EFI_NOT_READY           The specified configuration data is not ready due to an already in
236                                   progress asynchronous configuration process.
237   @retval EFI_NOT_FOUND           The specified configuration data is not found.
238 **/
239 typedef
240 EFI_STATUS
241 (EFIAPI *EFI_IP4_CONFIG2_GET_DATA) (
242   IN EFI_IP4_CONFIG2_PROTOCOL     *This,
243   IN EFI_IP4_CONFIG2_DATA_TYPE    DataType,
244   IN OUT UINTN                    *DataSize,
245   IN VOID                         *Data        OPTIONAL
246   );
247 
248 /**
249   Register an event that is to be signaled whenever a configuration process on the specified
250   configuration data is done.
251 
252   This function registers an event that is to be signaled whenever a configuration process on the
253   specified configuration data is done. An event can be registered for different DataType
254   simultaneously and the caller is responsible for determining which type of configuration data causes
255   the signaling of the event in such case.
256 
257   @param[in]   This               Pointer to the EFI_IP4_CONFIG2_PROTOCOL instance.
258   @param[in]   DataType           The type of data to unregister the event for.
259   @param[in]   Event              The event to register.
260 
261   @retval EFI_SUCCESS             The notification event for the specified configuration data is
262                                   registered.
263   @retval EFI_INVALID_PARAMETER   This is NULL or Event is NULL.
264   @retval EFI_UNSUPPORTED         The configuration data type specified by DataType is not supported.
265   @retval EFI_OUT_OF_RESOURCES    Required system resources could not be allocated.
266   @retval EFI_ACCESS_DENIED       The Event is already registered for the DataType.
267 **/
268 typedef
269 EFI_STATUS
270 (EFIAPI *EFI_IP4_CONFIG2_REGISTER_NOTIFY) (
271   IN EFI_IP4_CONFIG2_PROTOCOL     *This,
272   IN EFI_IP4_CONFIG2_DATA_TYPE    DataType,
273   IN EFI_EVENT                    Event
274   );
275 
276 /**
277   Remove a previously registered event for the specified configuration data.
278 
279   This function removes a previously registeredevent for the specified configuration data.
280 
281   @param[in]   This               Pointer to the EFI_IP4_CONFIG2_PROTOCOL instance.
282   @param[in]   DataType           The type of data to remove the previously registered event for.
283   @param[in]   Event              The event to unregister.
284 
285   @retval EFI_SUCCESS             The event registered for the specified configuration data is removed.
286   @retval EFI_INVALID_PARAMETER   This is NULL or Event is NULL.
287   @retval EFI_NOT_FOUND           The Eventhas not been registered for the specified DataType.
288 **/
289 typedef
290 EFI_STATUS
291 (EFIAPI *EFI_IP4_CONFIG2_UNREGISTER_NOTIFY) (
292   IN EFI_IP4_CONFIG2_PROTOCOL     *This,
293   IN EFI_IP4_CONFIG2_DATA_TYPE    DataType,
294   IN EFI_EVENT                    Event
295   );
296 
297 ///
298 /// The EFI_IP4_CONFIG2_PROTOCOL is designed to be the central repository for the common
299 /// configurations and the administrator configurable settings for the EFI IPv4 network stack.
300 /// An EFI IPv4 Configuration II Protocol instance will be installed on each communication device that
301 /// the EFI IPv4 network stack runs on.
302 ///
303 struct _EFI_IP4_CONFIG2_PROTOCOL {
304   EFI_IP4_CONFIG2_SET_DATA           SetData;
305   EFI_IP4_CONFIG2_GET_DATA           GetData;
306   EFI_IP4_CONFIG2_REGISTER_NOTIFY    RegisterDataNotify;
307   EFI_IP4_CONFIG2_UNREGISTER_NOTIFY  UnregisterDataNotify;
308 };
309 
310 extern EFI_GUID gEfiIp4Config2ProtocolGuid;
311 
312 #endif
313 
314