1 /** @file 2 This file defines the EFI IPv6 (Internet Protocol version 6) 3 Protocol interface. It is split into the following three main 4 sections: 5 - EFI IPv6 Service Binding Protocol 6 - EFI IPv6 Variable (deprecated in UEFI 2.4B) 7 - EFI IPv6 Protocol 8 The EFI IPv6 Protocol provides basic network IPv6 packet I/O services, 9 which includes support for Neighbor Discovery Protocol (ND), Multicast 10 Listener Discovery Protocol (MLD), and a subset of the Internet Control 11 Message Protocol (ICMPv6). 12 13 Copyright (c) 2008 - 2014, Intel Corporation. All rights reserved.<BR> 14 This program and the accompanying materials 15 are licensed and made available under the terms and conditions of the BSD License 16 which accompanies this distribution. The full text of the license may be found at 17 http://opensource.org/licenses/bsd-license.php 18 19 THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, 20 WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. 21 22 @par Revision Reference: 23 This Protocol is introduced in UEFI Specification 2.2 24 25 **/ 26 27 #ifndef __EFI_IP6_PROTOCOL_H__ 28 #define __EFI_IP6_PROTOCOL_H__ 29 30 #include <Protocol/ManagedNetwork.h> 31 32 33 #define EFI_IP6_SERVICE_BINDING_PROTOCOL_GUID \ 34 { \ 35 0xec835dd3, 0xfe0f, 0x617b, {0xa6, 0x21, 0xb3, 0x50, 0xc3, 0xe1, 0x33, 0x88 } \ 36 } 37 38 #define EFI_IP6_PROTOCOL_GUID \ 39 { \ 40 0x2c8759d5, 0x5c2d, 0x66ef, {0x92, 0x5f, 0xb6, 0x6c, 0x10, 0x19, 0x57, 0xe2 } \ 41 } 42 43 typedef struct _EFI_IP6_PROTOCOL EFI_IP6_PROTOCOL; 44 45 /// 46 /// EFI_IP6_ADDRESS_PAIR is deprecated in the UEFI 2.4B and should not be used any more. 47 /// The definition in here is only present to provide backwards compatability. 48 /// 49 typedef struct{ 50 /// 51 /// The EFI IPv6 Protocol instance handle that is using this address/prefix pair. 52 /// 53 EFI_HANDLE InstanceHandle; 54 /// 55 /// IPv6 address in network byte order. 56 /// 57 EFI_IPv6_ADDRESS Ip6Address; 58 /// 59 /// The length of the prefix associated with the Ip6Address. 60 /// 61 UINT8 PrefixLength; 62 } EFI_IP6_ADDRESS_PAIR; 63 64 /// 65 /// EFI_IP6_VARIABLE_DATA is deprecated in the UEFI 2.4B and should not be used any more. 66 /// The definition in here is only present to provide backwards compatability. 67 /// 68 typedef struct { 69 /// 70 /// The handle of the driver that creates this entry. 71 /// 72 EFI_HANDLE DriverHandle; 73 /// 74 /// The number of IPv6 address pairs that follow this data structure. 75 /// 76 UINT32 AddressCount; 77 /// 78 /// List of IPv6 address pairs that are currently in use. 79 /// 80 EFI_IP6_ADDRESS_PAIR AddressPairs[1]; 81 } EFI_IP6_VARIABLE_DATA; 82 83 /// 84 /// ICMPv6 type definitions for error messages 85 /// 86 ///@{ 87 #define ICMP_V6_DEST_UNREACHABLE 0x1 88 #define ICMP_V6_PACKET_TOO_BIG 0x2 89 #define ICMP_V6_TIME_EXCEEDED 0x3 90 #define ICMP_V6_PARAMETER_PROBLEM 0x4 91 ///@} 92 93 /// 94 /// ICMPv6 type definition for informational messages 95 /// 96 ///@{ 97 #define ICMP_V6_ECHO_REQUEST 0x80 98 #define ICMP_V6_ECHO_REPLY 0x81 99 #define ICMP_V6_LISTENER_QUERY 0x82 100 #define ICMP_V6_LISTENER_REPORT 0x83 101 #define ICMP_V6_LISTENER_DONE 0x84 102 #define ICMP_V6_ROUTER_SOLICIT 0x85 103 #define ICMP_V6_ROUTER_ADVERTISE 0x86 104 #define ICMP_V6_NEIGHBOR_SOLICIT 0x87 105 #define ICMP_V6_NEIGHBOR_ADVERTISE 0x88 106 #define ICMP_V6_REDIRECT 0x89 107 #define ICMP_V6_LISTENER_REPORT_2 0x8F 108 ///@} 109 110 /// 111 /// ICMPv6 code definitions for ICMP_V6_DEST_UNREACHABLE 112 /// 113 ///@{ 114 #define ICMP_V6_NO_ROUTE_TO_DEST 0x0 115 #define ICMP_V6_COMM_PROHIBITED 0x1 116 #define ICMP_V6_BEYOND_SCOPE 0x2 117 #define ICMP_V6_ADDR_UNREACHABLE 0x3 118 #define ICMP_V6_PORT_UNREACHABLE 0x4 119 #define ICMP_V6_SOURCE_ADDR_FAILED 0x5 120 #define ICMP_V6_ROUTE_REJECTED 0x6 121 ///@} 122 123 /// 124 /// ICMPv6 code definitions for ICMP_V6_TIME_EXCEEDED 125 /// 126 ///@{ 127 #define ICMP_V6_TIMEOUT_HOP_LIMIT 0x0 128 #define ICMP_V6_TIMEOUT_REASSEMBLE 0x1 129 ///@} 130 131 /// 132 /// ICMPv6 code definitions for ICMP_V6_PARAMETER_PROBLEM 133 /// 134 ///@{ 135 #define ICMP_V6_ERRONEOUS_HEADER 0x0 136 #define ICMP_V6_UNRECOGNIZE_NEXT_HDR 0x1 137 #define ICMP_V6_UNRECOGNIZE_OPTION 0x2 138 ///@} 139 140 /// 141 /// EFI_IP6_CONFIG_DATA 142 /// is used to report and change IPv6 session parameters. 143 /// 144 typedef struct { 145 /// 146 /// For the IPv6 packet to send and receive, this is the default value 147 /// of the 'Next Header' field in the last IPv6 extension header or in 148 /// the IPv6 header if there are no extension headers. Ignored when 149 /// AcceptPromiscuous is TRUE. 150 /// 151 UINT8 DefaultProtocol; 152 /// 153 /// Set to TRUE to receive all IPv6 packets that get through the 154 /// receive filters. 155 /// Set to FALSE to receive only the DefaultProtocol IPv6 156 /// packets that get through the receive filters. Ignored when 157 /// AcceptPromiscuous is TRUE. 158 /// 159 BOOLEAN AcceptAnyProtocol; 160 /// 161 /// Set to TRUE to receive ICMP error report packets. Ignored when 162 /// AcceptPromiscuous or AcceptAnyProtocol is TRUE. 163 /// 164 BOOLEAN AcceptIcmpErrors; 165 /// 166 /// Set to TRUE to receive all IPv6 packets that are sent to any 167 /// hardware address or any protocol address. Set to FALSE to stop 168 /// receiving all promiscuous IPv6 packets. 169 /// 170 BOOLEAN AcceptPromiscuous; 171 /// 172 /// The destination address of the packets that will be transmitted. 173 /// Ignored if it is unspecified. 174 /// 175 EFI_IPv6_ADDRESS DestinationAddress; 176 /// 177 /// The station IPv6 address that will be assigned to this EFI IPv6 178 /// Protocol instance. This field can be set and changed only when 179 /// the EFI IPv6 driver is transitioning from the stopped to the started 180 /// states. If the StationAddress is specified, the EFI IPv6 Protocol 181 /// driver will deliver only incoming IPv6 packets whose destination 182 /// matches this IPv6 address exactly. The StationAddress is required 183 /// to be one of currently configured IPv6 addresses. An address 184 /// containing all zeroes is also accepted as a special case. Under this 185 /// situation, the IPv6 driver is responsible for binding a source 186 /// address to this EFI IPv6 protocol instance according to the source 187 /// address selection algorithm. Only incoming packets destined to 188 /// the selected address will be delivered to the user. And the 189 /// selected station address can be retrieved through later 190 /// GetModeData() call. If no address is available for selecting, 191 /// EFI_NO_MAPPING will be returned, and the station address will 192 /// only be successfully bound to this EFI IPv6 protocol instance 193 /// after IP6ModeData.IsConfigured changed to TRUE. 194 /// 195 EFI_IPv6_ADDRESS StationAddress; 196 /// 197 /// TrafficClass field in transmitted IPv6 packets. Default value 198 /// is zero. 199 /// 200 UINT8 TrafficClass; 201 /// 202 /// HopLimit field in transmitted IPv6 packets. 203 /// 204 UINT8 HopLimit; 205 /// 206 /// FlowLabel field in transmitted IPv6 packets. Default value is 207 /// zero. 208 /// 209 UINT32 FlowLabel; 210 /// 211 /// The timer timeout value (number of microseconds) for the 212 /// receive timeout event to be associated with each assembled 213 /// packet. Zero means do not drop assembled packets. 214 /// 215 UINT32 ReceiveTimeout; 216 /// 217 /// The timer timeout value (number of microseconds) for the 218 /// transmit timeout event to be associated with each outgoing 219 /// packet. Zero means do not drop outgoing packets. 220 /// 221 UINT32 TransmitTimeout; 222 } EFI_IP6_CONFIG_DATA; 223 224 /// 225 /// EFI_IP6_ADDRESS_INFO 226 /// 227 typedef struct { 228 EFI_IPv6_ADDRESS Address; ///< The IPv6 address. 229 UINT8 PrefixLength; ///< The length of the prefix associated with the Address. 230 } EFI_IP6_ADDRESS_INFO; 231 232 /// 233 /// EFI_IP6_ROUTE_TABLE 234 /// is the entry structure that is used in routing tables 235 /// 236 typedef struct { 237 /// 238 /// The IPv6 address of the gateway to be used as the next hop for 239 /// packets to this prefix. If the IPv6 address is all zeros, then the 240 /// prefix is on-link. 241 /// 242 EFI_IPv6_ADDRESS Gateway; 243 /// 244 /// The destination prefix to be routed. 245 /// 246 EFI_IPv6_ADDRESS Destination; 247 /// 248 /// The length of the prefix associated with the Destination. 249 /// 250 UINT8 PrefixLength; 251 } EFI_IP6_ROUTE_TABLE; 252 253 /// 254 /// EFI_IP6_NEIGHBOR_STATE 255 /// 256 typedef enum { 257 /// 258 /// Address resolution is being performed on this entry. Specially, 259 /// Neighbor Solicitation has been sent to the solicited-node 260 /// multicast address of the target, but corresponding Neighbor 261 /// Advertisement has not been received. 262 /// 263 EfiNeighborInComplete, 264 /// 265 /// Positive confirmation was received that the forward path to the 266 /// neighbor was functioning properly. 267 /// 268 EfiNeighborReachable, 269 /// 270 ///Reachable Time has elapsed since the last positive confirmation 271 ///was received. In this state, the forward path to the neighbor was 272 ///functioning properly. 273 /// 274 EfiNeighborStale, 275 /// 276 /// This state is an optimization that gives upper-layer protocols 277 /// additional time to provide reachability confirmation. 278 /// 279 EfiNeighborDelay, 280 /// 281 /// A reachability confirmation is actively sought by retransmitting 282 /// Neighbor Solicitations every RetransTimer milliseconds until a 283 /// reachability confirmation is received. 284 /// 285 EfiNeighborProbe 286 } EFI_IP6_NEIGHBOR_STATE; 287 288 /// 289 /// EFI_IP6_NEIGHBOR_CACHE 290 /// is the entry structure that is used in neighbor cache. It records a set 291 /// of entries about individual neighbors to which traffic has been sent recently. 292 /// 293 typedef struct { 294 EFI_IPv6_ADDRESS Neighbor; ///< The on-link unicast/anycast IP address of the neighbor. 295 EFI_MAC_ADDRESS LinkAddress; ///< Link-layer address of the neighbor. 296 EFI_IP6_NEIGHBOR_STATE State; ///< State of this neighbor cache entry. 297 } EFI_IP6_NEIGHBOR_CACHE; 298 299 /// 300 /// EFI_IP6_ICMP_TYPE 301 /// is used to describe those ICMP messages that are supported by this EFI 302 /// IPv6 Protocol driver. 303 /// 304 typedef struct { 305 UINT8 Type; ///< The type of ICMP message. 306 UINT8 Code; ///< The code of the ICMP message. 307 } EFI_IP6_ICMP_TYPE; 308 309 /// 310 /// EFI_IP6_MODE_DATA 311 /// 312 typedef struct { 313 /// 314 /// Set to TRUE after this EFI IPv6 Protocol instance is started. 315 /// All other fields in this structure are undefined until this field is TRUE. 316 /// Set to FALSE when the EFI IPv6 Protocol instance is stopped. 317 /// 318 BOOLEAN IsStarted; 319 /// 320 /// The maximum packet size, in bytes, of the packet which the upper layer driver could feed. 321 /// 322 UINT32 MaxPacketSize; 323 /// 324 /// Current configuration settings. Undefined until IsStarted is TRUE. 325 /// 326 EFI_IP6_CONFIG_DATA ConfigData; 327 /// 328 /// Set to TRUE when the EFI IPv6 Protocol instance is configured. 329 /// The instance is configured when it has a station address and 330 /// corresponding prefix length. 331 /// Set to FALSE when the EFI IPv6 Protocol instance is not configured. 332 /// 333 BOOLEAN IsConfigured; 334 /// 335 /// Number of configured IPv6 addresses on this interface. 336 /// 337 UINT32 AddressCount; 338 /// 339 /// List of currently configured IPv6 addresses and corresponding 340 /// prefix lengths assigned to this interface. It is caller's 341 /// responsibility to free this buffer. 342 /// 343 EFI_IP6_ADDRESS_INFO *AddressList; 344 /// 345 /// Number of joined multicast groups. Undefined until 346 /// IsConfigured is TRUE. 347 /// 348 UINT32 GroupCount; 349 /// 350 /// List of joined multicast group addresses. It is caller's 351 /// responsibility to free this buffer. Undefined until 352 /// IsConfigured is TRUE. 353 /// 354 EFI_IPv6_ADDRESS *GroupTable; 355 /// 356 /// Number of entries in the routing table. Undefined until 357 /// IsConfigured is TRUE. 358 /// 359 UINT32 RouteCount; 360 /// 361 /// Routing table entries. It is caller's responsibility to free this buffer. 362 /// 363 EFI_IP6_ROUTE_TABLE *RouteTable; 364 /// 365 /// Number of entries in the neighbor cache. Undefined until 366 /// IsConfigured is TRUE. 367 /// 368 UINT32 NeighborCount; 369 /// 370 /// Neighbor cache entries. It is caller's responsibility to free this 371 /// buffer. Undefined until IsConfigured is TRUE. 372 /// 373 EFI_IP6_NEIGHBOR_CACHE *NeighborCache; 374 /// 375 /// Number of entries in the prefix table. Undefined until 376 /// IsConfigured is TRUE. 377 /// 378 UINT32 PrefixCount; 379 /// 380 /// On-link Prefix table entries. It is caller's responsibility to free this 381 /// buffer. Undefined until IsConfigured is TRUE. 382 /// 383 EFI_IP6_ADDRESS_INFO *PrefixTable; 384 /// 385 /// Number of entries in the supported ICMP types list. 386 /// 387 UINT32 IcmpTypeCount; 388 /// 389 /// Array of ICMP types and codes that are supported by this EFI 390 /// IPv6 Protocol driver. It is caller's responsibility to free this 391 /// buffer. 392 /// 393 EFI_IP6_ICMP_TYPE *IcmpTypeList; 394 } EFI_IP6_MODE_DATA; 395 396 /// 397 /// EFI_IP6_HEADER 398 /// The fields in the IPv6 header structure are defined in the Internet 399 /// Protocol version6 specification. 400 /// 401 #pragma pack(1) 402 typedef struct _EFI_IP6_HEADER { 403 UINT8 TrafficClassH:4; 404 UINT8 Version:4; 405 UINT8 FlowLabelH:4; 406 UINT8 TrafficClassL:4; 407 UINT16 FlowLabelL; 408 UINT16 PayloadLength; 409 UINT8 NextHeader; 410 UINT8 HopLimit; 411 EFI_IPv6_ADDRESS SourceAddress; 412 EFI_IPv6_ADDRESS DestinationAddress; 413 } EFI_IP6_HEADER; 414 #pragma pack() 415 416 /// 417 /// EFI_IP6_FRAGMENT_DATA 418 /// describes the location and length of the IPv6 packet 419 /// fragment to transmit or that has been received. 420 /// 421 typedef struct _EFI_IP6_FRAGMENT_DATA { 422 UINT32 FragmentLength; ///< Length of fragment data. This field may not be set to zero. 423 VOID *FragmentBuffer; ///< Pointer to fragment data. This field may not be set to NULL. 424 } EFI_IP6_FRAGMENT_DATA; 425 426 /// 427 /// EFI_IP6_RECEIVE_DATA 428 /// 429 typedef struct _EFI_IP6_RECEIVE_DATA { 430 /// 431 /// Time when the EFI IPv6 Protocol driver accepted the packet. 432 /// Ignored if it is zero. 433 /// 434 EFI_TIME TimeStamp; 435 /// 436 /// After this event is signaled, the receive data structure is released 437 /// and must not be referenced. 438 /// 439 EFI_EVENT RecycleSignal; 440 /// 441 ///Length of the IPv6 packet headers, including both the IPv6 442 ///header and any extension headers. 443 /// 444 UINT32 HeaderLength; 445 /// 446 /// Pointer to the IPv6 packet header. If the IPv6 packet was 447 /// fragmented, this argument is a pointer to the header in the first 448 /// fragment. 449 /// 450 EFI_IP6_HEADER *Header; 451 /// 452 /// Sum of the lengths of IPv6 packet buffers in FragmentTable. May 453 /// be zero. 454 /// 455 UINT32 DataLength; 456 /// 457 /// Number of IPv6 payload fragments. May be zero. 458 /// 459 UINT32 FragmentCount; 460 /// 461 /// Array of payload fragment lengths and buffer pointers. 462 /// 463 EFI_IP6_FRAGMENT_DATA FragmentTable[1]; 464 } EFI_IP6_RECEIVE_DATA; 465 466 /// 467 /// EFI_IP6_OVERRIDE_DATA 468 /// The information and flags in the override data structure will override 469 /// default parameters or settings for one Transmit() function call. 470 /// 471 typedef struct _EFI_IP6_OVERRIDE_DATA { 472 UINT8 Protocol; ///< Protocol type override. 473 UINT8 HopLimit; ///< Hop-Limit override. 474 UINT32 FlowLabel; ///< Flow-Label override. 475 } EFI_IP6_OVERRIDE_DATA; 476 477 /// 478 /// EFI_IP6_TRANSMIT_DATA 479 /// 480 typedef struct _EFI_IP6_TRANSMIT_DATA { 481 /// 482 /// The destination IPv6 address. If it is unspecified, 483 /// ConfigData.DestinationAddress will be used instead. 484 /// 485 EFI_IPv6_ADDRESS DestinationAddress; 486 /// 487 /// If not NULL, the IPv6 transmission control override data. 488 /// 489 EFI_IP6_OVERRIDE_DATA *OverrideData; 490 /// 491 /// Total length in byte of the IPv6 extension headers specified in 492 /// ExtHdrs. 493 /// 494 UINT32 ExtHdrsLength; 495 /// 496 /// Pointer to the IPv6 extension headers. The IP layer will append 497 /// the required extension headers if they are not specified by 498 /// ExtHdrs. Ignored if ExtHdrsLength is zero. 499 /// 500 VOID *ExtHdrs; 501 /// 502 /// The protocol of first extension header in ExtHdrs. Ignored if 503 /// ExtHdrsLength is zero. 504 /// 505 UINT8 NextHeader; 506 /// 507 /// Total length in bytes of the FragmentTable data to transmit. 508 /// 509 UINT32 DataLength; 510 /// 511 /// Number of entries in the fragment data table. 512 /// 513 UINT32 FragmentCount; 514 /// 515 /// Start of the fragment data table. 516 /// 517 EFI_IP6_FRAGMENT_DATA FragmentTable[1]; 518 } EFI_IP6_TRANSMIT_DATA; 519 520 /// 521 /// EFI_IP6_COMPLETION_TOKEN 522 /// structures are used for both transmit and receive operations. 523 /// 524 typedef struct { 525 /// 526 /// This Event will be signaled after the Status field is updated by 527 /// the EFI IPv6 Protocol driver. The type of Event must be EFI_NOTIFY_SIGNAL. 528 /// 529 EFI_EVENT Event; 530 /// 531 /// Will be set to one of the following values: 532 /// - EFI_SUCCESS: The receive or transmit completed 533 /// successfully. 534 /// - EFI_ABORTED: The receive or transmit was aborted 535 /// - EFI_TIMEOUT: The transmit timeout expired. 536 /// - EFI_ICMP_ERROR: An ICMP error packet was received. 537 /// - EFI_DEVICE_ERROR: An unexpected system or network 538 /// error occurred. 539 /// - EFI_SECURITY_VIOLATION: The transmit or receive was 540 /// failed because of an IPsec policy check. 541 /// - EFI_NO_MEDIA: There was a media error. 542 /// 543 EFI_STATUS Status; 544 union { 545 /// 546 /// When the Token is used for receiving, RxData is a pointer to the EFI_IP6_RECEIVE_DATA. 547 /// 548 EFI_IP6_RECEIVE_DATA *RxData; 549 /// 550 /// When the Token is used for transmitting, TxData is a pointer to the EFI_IP6_TRANSMIT_DATA. 551 /// 552 EFI_IP6_TRANSMIT_DATA *TxData; 553 } Packet; 554 } EFI_IP6_COMPLETION_TOKEN; 555 556 /** 557 Gets the current operational settings for this instance of the EFI IPv6 Protocol driver. 558 559 The GetModeData() function returns the current operational mode data for this driver instance. 560 The data fields in EFI_IP6_MODE_DATA are read only. This function is used optionally to 561 retrieve the operational mode data of underlying networks or drivers.. 562 563 @param[in] This Pointer to the EFI_IP6_PROTOCOL instance. 564 @param[out] Ip6ModeData Pointer to the EFI IPv6 Protocol mode data structure. 565 @param[out] MnpConfigData Pointer to the managed network configuration data structure. 566 @param[out] SnpModeData Pointer to the simple network mode data structure. 567 568 @retval EFI_SUCCESS The operation completed successfully. 569 @retval EFI_INVALID_PARAMETER This is NULL. 570 @retval EFI_OUT_OF_RESOURCES The required mode data could not be allocated. 571 572 **/ 573 typedef 574 EFI_STATUS 575 (EFIAPI *EFI_IP6_GET_MODE_DATA)( 576 IN EFI_IP6_PROTOCOL *This, 577 OUT EFI_IP6_MODE_DATA *Ip6ModeData OPTIONAL, 578 OUT EFI_MANAGED_NETWORK_CONFIG_DATA *MnpConfigData OPTIONAL, 579 OUT EFI_SIMPLE_NETWORK_MODE *SnpModeData OPTIONAL 580 ); 581 582 /** 583 Assigns an IPv6 address and subnet mask to this EFI IPv6 Protocol driver instance. 584 585 The Configure() function is used to set, change, or reset the operational parameters and filter 586 settings for this EFI IPv6 Protocol instance. Until these parameters have been set, no network traffic 587 can be sent or received by this instance. Once the parameters have been reset (by calling this 588 function with Ip6ConfigData set to NULL), no more traffic can be sent or received until these 589 parameters have been set again. Each EFI IPv6 Protocol instance can be started and stopped 590 independently of each other by enabling or disabling their receive filter settings with the 591 Configure() function. 592 593 If Ip6ConfigData.StationAddress is a valid non-zero IPv6 unicast address, it is required 594 to be one of the currently configured IPv6 addresses list in the EFI IPv6 drivers, or else 595 EFI_INVALID_PARAMETER will be returned. If Ip6ConfigData.StationAddress is 596 unspecified, the IPv6 driver will bind a source address according to the source address selection 597 algorithm. Clients could frequently call GetModeData() to check get currently configured IPv6 598 address list in the EFI IPv6 driver. If both Ip6ConfigData.StationAddress and 599 Ip6ConfigData.Destination are unspecified, when transmitting the packet afterwards, the 600 source address filled in each outgoing IPv6 packet is decided based on the destination of this packet. . 601 602 If operational parameters are reset or changed, any pending transmit and receive requests will be 603 cancelled. Their completion token status will be set to EFI_ABORTED and their events will be 604 signaled. 605 606 @param[in] This Pointer to the EFI_IP6_PROTOCOL instance. 607 @param[in] Ip6ConfigData Pointer to the EFI IPv6 Protocol configuration data structure. 608 609 @retval EFI_SUCCESS The driver instance was successfully opened. 610 @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: 611 - This is NULL. 612 - Ip6ConfigData.StationAddress is neither zero nor 613 a unicast IPv6 address. 614 - Ip6ConfigData.StationAddress is neither zero nor 615 one of the configured IP addresses in the EFI IPv6 driver. 616 - Ip6ConfigData.DefaultProtocol is illegal. 617 @retval EFI_OUT_OF_RESOURCES The EFI IPv6 Protocol driver instance data could not be allocated. 618 @retval EFI_NO_MAPPING The IPv6 driver was responsible for choosing a source address for 619 this instance, but no source address was available for use. 620 @retval EFI_ALREADY_STARTED The interface is already open and must be stopped before the IPv6 621 address or prefix length can be changed. 622 @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. The EFI IPv6 623 Protocol driver instance is not opened. 624 @retval EFI_UNSUPPORTED Default protocol specified through 625 Ip6ConfigData.DefaulProtocol isn't supported. 626 627 **/ 628 typedef 629 EFI_STATUS 630 (EFIAPI *EFI_IP6_CONFIGURE)( 631 IN EFI_IP6_PROTOCOL *This, 632 IN EFI_IP6_CONFIG_DATA *Ip6ConfigData OPTIONAL 633 ); 634 635 /** 636 Joins and leaves multicast groups. 637 638 The Groups() function is used to join and leave multicast group sessions. Joining a group will 639 enable reception of matching multicast packets. Leaving a group will disable reception of matching 640 multicast packets. Source-Specific Multicast isn't required to be supported. 641 642 If JoinFlag is FALSE and GroupAddress is NULL, all joined groups will be left. 643 644 @param[in] This Pointer to the EFI_IP6_PROTOCOL instance. 645 @param[in] JoinFlag Set to TRUE to join the multicast group session and FALSE to leave. 646 @param[in] GroupAddress Pointer to the IPv6 multicast address. 647 648 @retval EFI_SUCCESS The operation completed successfully. 649 @retval EFI_INVALID_PARAMETER One or more of the following is TRUE: 650 - This is NULL. 651 - JoinFlag is TRUE and GroupAddress is NULL. 652 - GroupAddress is not NULL and *GroupAddress is 653 not a multicast IPv6 address. 654 - GroupAddress is not NULL and *GroupAddress is in the 655 range of SSM destination address. 656 @retval EFI_NOT_STARTED This instance has not been started. 657 @retval EFI_OUT_OF_RESOURCES System resources could not be allocated. 658 @retval EFI_UNSUPPORTED This EFI IPv6 Protocol implementation does not support multicast groups. 659 @retval EFI_ALREADY_STARTED The group address is already in the group table (when 660 JoinFlag is TRUE). 661 @retval EFI_NOT_FOUND The group address is not in the group table (when JoinFlag is FALSE). 662 @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. 663 664 **/ 665 typedef 666 EFI_STATUS 667 (EFIAPI *EFI_IP6_GROUPS)( 668 IN EFI_IP6_PROTOCOL *This, 669 IN BOOLEAN JoinFlag, 670 IN EFI_IPv6_ADDRESS *GroupAddress OPTIONAL 671 ); 672 673 /** 674 Adds and deletes routing table entries. 675 676 The Routes() function adds a route to or deletes a route from the routing table. 677 678 Routes are determined by comparing the leftmost PrefixLength bits of Destination with 679 the destination IPv6 address arithmetically. The gateway address must be on the same subnet as the 680 configured station address. 681 682 The default route is added with Destination and PrefixLegth both set to all zeros. The 683 default route matches all destination IPv6 addresses that do not match any other routes. 684 685 All EFI IPv6 Protocol instances share a routing table. 686 687 @param[in] This Pointer to the EFI_IP6_PROTOCOL instance. 688 @param[in] DeleteRoute Set to TRUE to delete this route from the routing table. Set to 689 FALSE to add this route to the routing table. Destination, 690 PrefixLength and Gateway are used as the key to each 691 route entry. 692 @param[in] Destination The address prefix of the subnet that needs to be routed. 693 @param[in] PrefixLength The prefix length of Destination. Ignored if Destination 694 is NULL. 695 @param[in] GatewayAddress The unicast gateway IPv6 address for this route. 696 697 @retval EFI_SUCCESS The operation completed successfully. 698 @retval EFI_NOT_STARTED The driver instance has not been started. 699 @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: 700 - This is NULL. 701 - When DeleteRoute is TRUE, both Destination and 702 GatewayAddress are NULL. 703 - When DeleteRoute is FALSE, either Destination or 704 GatewayAddress is NULL. 705 - *GatewayAddress is not a valid unicast IPv6 address. 706 - *GatewayAddress is one of the local configured IPv6 707 addresses. 708 @retval EFI_OUT_OF_RESOURCES Could not add the entry to the routing table. 709 @retval EFI_NOT_FOUND This route is not in the routing table (when DeleteRoute is TRUE). 710 @retval EFI_ACCESS_DENIED The route is already defined in the routing table (when 711 DeleteRoute is FALSE). 712 713 **/ 714 typedef 715 EFI_STATUS 716 (EFIAPI *EFI_IP6_ROUTES)( 717 IN EFI_IP6_PROTOCOL *This, 718 IN BOOLEAN DeleteRoute, 719 IN EFI_IPv6_ADDRESS *Destination OPTIONAL, 720 IN UINT8 PrefixLength, 721 IN EFI_IPv6_ADDRESS *GatewayAddress OPTIONAL 722 ); 723 724 /** 725 Add or delete Neighbor cache entries. 726 727 The Neighbors() function is used to add, update, or delete an entry from neighbor cache. 728 IPv6 neighbor cache entries are typically inserted and updated by the network protocol driver as 729 network traffic is processed. Most neighbor cache entries will time out and be deleted if the network 730 traffic stops. Neighbor cache entries that were inserted by Neighbors() may be static (will not 731 timeout) or dynamic (will time out). 732 733 The implementation should follow the neighbor cache timeout mechanism which is defined in 734 RFC4861. The default neighbor cache timeout value should be tuned for the expected network 735 environment 736 737 @param[in] This Pointer to the EFI_IP6_PROTOCOL instance. 738 @param[in] DeleteFlag Set to TRUE to delete the specified cache entry, set to FALSE to 739 add (or update, if it already exists and Override is TRUE) the 740 specified cache entry. TargetIp6Address is used as the key 741 to find the requested cache entry. 742 @param[in] TargetIp6Address Pointer to Target IPv6 address. 743 @param[in] TargetLinkAddress Pointer to link-layer address of the target. Ignored if NULL. 744 @param[in] Timeout Time in 100-ns units that this entry will remain in the neighbor 745 cache, it will be deleted after Timeout. A value of zero means that 746 the entry is permanent. A non-zero value means that the entry is 747 dynamic. 748 @param[in] Override If TRUE, the cached link-layer address of the matching entry will 749 be overridden and updated; if FALSE, EFI_ACCESS_DENIED 750 will be returned if a corresponding cache entry already existed. 751 752 @retval EFI_SUCCESS The data has been queued for transmission. 753 @retval EFI_NOT_STARTED This instance has not been started. 754 @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: 755 - This is NULL. 756 - TargetIpAddress is NULL. 757 - *TargetLinkAddress is invalid when not NULL. 758 - *TargetIpAddress is not a valid unicast IPv6 address. 759 - *TargetIpAddress is one of the local configured IPv6 760 addresses. 761 @retval EFI_OUT_OF_RESOURCES Could not add the entry to the neighbor cache. 762 @retval EFI_NOT_FOUND This entry is not in the neighbor cache (when DeleteFlag is 763 TRUE or when DeleteFlag is FALSE while 764 TargetLinkAddress is NULL.). 765 @retval EFI_ACCESS_DENIED The to-be-added entry is already defined in the neighbor cache, 766 and that entry is tagged as un-overridden (when DeleteFlag 767 is FALSE). 768 769 **/ 770 typedef 771 EFI_STATUS 772 (EFIAPI *EFI_IP6_NEIGHBORS)( 773 IN EFI_IP6_PROTOCOL *This, 774 IN BOOLEAN DeleteFlag, 775 IN EFI_IPv6_ADDRESS *TargetIp6Address, 776 IN EFI_MAC_ADDRESS *TargetLinkAddress, 777 IN UINT32 Timeout, 778 IN BOOLEAN Override 779 ); 780 781 /** 782 Places outgoing data packets into the transmit queue. 783 784 The Transmit() function places a sending request in the transmit queue of this 785 EFI IPv6 Protocol instance. Whenever the packet in the token is sent out or some 786 errors occur, the event in the token will be signaled and the status is updated. 787 788 @param[in] This Pointer to the EFI_IP6_PROTOCOL instance. 789 @param[in] Token Pointer to the transmit token. 790 791 @retval EFI_SUCCESS The data has been queued for transmission. 792 @retval EFI_NOT_STARTED This instance has not been started. 793 @retval EFI_NO_MAPPING The IPv6 driver was responsible for choosing a source address for 794 this transmission, but no source address was available for use. 795 @retval EFI_INVALID_PARAMETER One or more of the following is TRUE: 796 - This is NULL. 797 - Token is NULL. 798 - Token.Event is NULL. 799 - Token.Packet.TxData is NULL. 800 - Token.Packet.ExtHdrsLength is not zero and Token.Packet.ExtHdrs is NULL. 801 - Token.Packet.FragmentCount is zero. 802 - One or more of the Token.Packet.TxData.FragmentTable[].FragmentLength fields is zero. 803 - One or more of the Token.Packet.TxData.FragmentTable[].FragmentBuffer fields is NULL. 804 - Token.Packet.TxData.DataLength is zero or not equal to the sum of fragment lengths. 805 - Token.Packet.TxData.DestinationAddress is non-zero when DestinationAddress is configured as 806 non-zero when doing Configure() for this EFI IPv6 protocol instance. 807 - Token.Packet.TxData.DestinationAddress is unspecified when DestinationAddress is unspecified 808 when doing Configure() for this EFI IPv6 protocol instance. 809 @retval EFI_ACCESS_DENIED The transmit completion token with the same Token.Event 810 was already in the transmit queue. 811 @retval EFI_NOT_READY The completion token could not be queued because the transmit 812 queue is full. 813 @retval EFI_NOT_FOUND Not route is found to destination address. 814 @retval EFI_OUT_OF_RESOURCES Could not queue the transmit data. 815 @retval EFI_BUFFER_TOO_SMALL Token.Packet.TxData.TotalDataLength is too 816 short to transmit. 817 @retval EFI_BAD_BUFFER_SIZE If Token.Packet.TxData.DataLength is beyond the 818 maximum that which can be described through the Fragment Offset 819 field in Fragment header when performing fragmentation. 820 @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. 821 822 **/ 823 typedef 824 EFI_STATUS 825 (EFIAPI *EFI_IP6_TRANSMIT)( 826 IN EFI_IP6_PROTOCOL *This, 827 IN EFI_IP6_COMPLETION_TOKEN *Token 828 ); 829 830 /** 831 Places a receiving request into the receiving queue. 832 833 The Receive() function places a completion token into the receive packet queue. 834 This function is always asynchronous. 835 836 The Token.Event field in the completion token must be filled in by the caller 837 and cannot be NULL. When the receive operation completes, the EFI IPv6 Protocol 838 driver updates the Token.Status and Token.Packet.RxData fields and the Token.Event 839 is signaled. 840 841 @param[in] This Pointer to the EFI_IP6_PROTOCOL instance. 842 @param[in] Token Pointer to a token that is associated with the receive data descriptor. 843 844 @retval EFI_SUCCESS The receive completion token was cached. 845 @retval EFI_NOT_STARTED This EFI IPv6 Protocol instance has not been started. 846 @retval EFI_NO_MAPPING When IP6 driver responsible for binding source address to this instance, 847 while no source address is available for use. 848 @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: 849 - This is NULL. 850 - Token is NULL. 851 - Token.Event is NULL. 852 @retval EFI_OUT_OF_RESOURCES The receive completion token could not be queued due to a lack of system 853 resources (usually memory). 854 @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. 855 The EFI IPv6 Protocol instance has been reset to startup defaults. 856 @retval EFI_ACCESS_DENIED The receive completion token with the same Token.Event was already 857 in the receive queue. 858 @retval EFI_NOT_READY The receive request could not be queued because the receive queue is full. 859 860 **/ 861 typedef 862 EFI_STATUS 863 (EFIAPI *EFI_IP6_RECEIVE)( 864 IN EFI_IP6_PROTOCOL *This, 865 IN EFI_IP6_COMPLETION_TOKEN *Token 866 ); 867 868 /** 869 Abort an asynchronous transmit or receive request. 870 871 The Cancel() function is used to abort a pending transmit or receive request. 872 If the token is in the transmit or receive request queues, after calling this 873 function, Token->Status will be set to EFI_ABORTED and then Token->Event will 874 be signaled. If the token is not in one of the queues, which usually means the 875 asynchronous operation has completed, this function will not signal the token 876 and EFI_NOT_FOUND is returned. 877 878 @param[in] This Pointer to the EFI_IP6_PROTOCOL instance. 879 @param[in] Token Pointer to a token that has been issued by 880 EFI_IP6_PROTOCOL.Transmit() or 881 EFI_IP6_PROTOCOL.Receive(). If NULL, all pending 882 tokens are aborted. Type EFI_IP6_COMPLETION_TOKEN is 883 defined in EFI_IP6_PROTOCOL.Transmit(). 884 885 @retval EFI_SUCCESS The asynchronous I/O request was aborted and 886 Token->Event was signaled. When Token is NULL, all 887 pending requests were aborted and their events were signaled. 888 @retval EFI_INVALID_PARAMETER This is NULL. 889 @retval EFI_NOT_STARTED This instance has not been started. 890 @retval EFI_NOT_FOUND When Token is not NULL, the asynchronous I/O request was 891 not found in the transmit or receive queue. It has either completed 892 or was not issued by Transmit() and Receive(). 893 @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. 894 895 **/ 896 typedef 897 EFI_STATUS 898 (EFIAPI *EFI_IP6_CANCEL)( 899 IN EFI_IP6_PROTOCOL *This, 900 IN EFI_IP6_COMPLETION_TOKEN *Token OPTIONAL 901 ); 902 903 /** 904 Polls for incoming data packets and processes outgoing data packets. 905 906 The Poll() function polls for incoming data packets and processes outgoing data 907 packets. Network drivers and applications can call the EFI_IP6_PROTOCOL.Poll() 908 function to increase the rate that data packets are moved between the communications 909 device and the transmit and receive queues. 910 911 In some systems the periodic timer event may not poll the underlying communications 912 device fast enough to transmit and/or receive all data packets without missing 913 incoming packets or dropping outgoing packets. Drivers and applications that are 914 experiencing packet loss should try calling the EFI_IP6_PROTOCOL.Poll() function 915 more often. 916 917 @param[in] This Pointer to the EFI_IP6_PROTOCOL instance. 918 919 @retval EFI_SUCCESS Incoming or outgoing data was processed. 920 @retval EFI_NOT_STARTED This EFI IPv6 Protocol instance has not been started. 921 @retval EFI_INVALID_PARAMETER This is NULL. 922 @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. 923 @retval EFI_NOT_READY No incoming or outgoing data is processed. 924 @retval EFI_TIMEOUT Data was dropped out of the transmit and/or receive queue. 925 Consider increasing the polling rate. 926 927 **/ 928 typedef 929 EFI_STATUS 930 (EFIAPI *EFI_IP6_POLL)( 931 IN EFI_IP6_PROTOCOL *This 932 ); 933 934 /// 935 /// The EFI IPv6 Protocol implements a simple packet-oriented interface that can be 936 /// used by drivers, daemons, and applications to transmit and receive network packets. 937 /// 938 struct _EFI_IP6_PROTOCOL { 939 EFI_IP6_GET_MODE_DATA GetModeData; 940 EFI_IP6_CONFIGURE Configure; 941 EFI_IP6_GROUPS Groups; 942 EFI_IP6_ROUTES Routes; 943 EFI_IP6_NEIGHBORS Neighbors; 944 EFI_IP6_TRANSMIT Transmit; 945 EFI_IP6_RECEIVE Receive; 946 EFI_IP6_CANCEL Cancel; 947 EFI_IP6_POLL Poll; 948 }; 949 950 extern EFI_GUID gEfiIp6ServiceBindingProtocolGuid; 951 extern EFI_GUID gEfiIp6ProtocolGuid; 952 953 #endif 954