1 /** @file
2 The Timer Library implementation which uses the Time Stamp Counter in the processor.
3
4 For Pentium 4 processors, Intel Xeon processors (family [0FH], models [03H and higher]);
5 for Intel Core Solo and Intel Core Duo processors (family [06H], model [0EH]);
6 for the Intel Xeon processor 5100 series and Intel Core 2 Duo processors (family [06H], model [0FH]);
7 for Intel Core 2 and Intel Xeon processors (family [06H], display_model [17H]);
8 for Intel Atom processors (family [06H], display_model [1CH]):
9 the time-stamp counter increments at a constant rate.
10 That rate may be set by the maximum core-clock to bus-clock ratio of the processor or may be set by
11 the maximum resolved frequency at which the processor is booted. The maximum resolved frequency may
12 differ from the maximum qualified frequency of the processor.
13
14 The specific processor configuration determines the behavior. Constant TSC behavior ensures that the
15 duration of each clock tick is uniform and supports the use of the TSC as a wall clock timer even if
16 the processor core changes frequency. This is the architectural behavior moving forward.
17
18 A Processor's support for invariant TSC is indicated by CPUID.0x80000007.EDX[8].
19
20 Copyright (c) 2009 - 2011, Intel Corporation. All rights reserved.<BR>
21 This program and the accompanying materials
22 are licensed and made available under the terms and conditions of the BSD License
23 which accompanies this distribution. The full text of the license may be found at
24 http://opensource.org/licenses/bsd-license.php
25
26 THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
27 WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
28
29 **/
30
31 #include "TscTimerLibInternal.h"
32
33 /** Calculate TSC frequency.
34
35 The TSC counting frequency is determined by comparing how far it counts
36 during a 1ms period as determined by the ACPI timer. The ACPI timer is
37 used because it counts at a known frequency.
38 If ACPI I/O space not enabled, this function will enable it. Then the
39 TSC is sampled, followed by waiting for 3579 clocks of the ACPI timer, or 1ms.
40 The TSC is then sampled again. The difference multiplied by 1000 is the TSC
41 frequency. There will be a small error because of the overhead of reading
42 the ACPI timer. An attempt is made to determine and compensate for this error.
43
44 @return The number of TSC counts per second.
45
46 **/
47 UINT64
InternalCalculateTscFrequency(VOID)48 InternalCalculateTscFrequency (
49 VOID
50 )
51 {
52 UINT64 StartTSC;
53 UINT64 EndTSC;
54 UINT32 TimerAddr;
55 UINT32 Ticks;
56 UINT64 TscFrequency;
57
58 //
59 // If ACPI I/O space is not enabled yet, program ACPI I/O base address and enable it.
60 //
61 if ((PciRead8 (PCI_ICH_LPC_ADDRESS (R_ICH_LPC_ACPI_CNT)) & B_ICH_LPC_ACPI_CNT_ACPI_EN) == 0) {
62 PciWrite16 (PCI_ICH_LPC_ADDRESS (R_ICH_LPC_ACPI_BASE), PcdGet16 (PcdPerfPkgAcpiIoPortBaseAddress));
63 PciOr8 (PCI_ICH_LPC_ADDRESS (R_ICH_LPC_ACPI_CNT), B_ICH_LPC_ACPI_CNT_ACPI_EN);
64 }
65
66 //
67 // ACPI I/O space should be enabled now, locate the ACPI Timer.
68 // ACPI I/O base address maybe have be initialized by other driver with different value,
69 // So get it from PCI space directly.
70 //
71 TimerAddr = ((PciRead16 (PCI_ICH_LPC_ADDRESS (R_ICH_LPC_ACPI_BASE))) & B_ICH_LPC_ACPI_BASE_BAR) + R_ACPI_PM1_TMR;
72 Ticks = IoRead32 (TimerAddr) + (3579); // Set Ticks to 1ms in the future
73 StartTSC = AsmReadTsc(); // Get base value for the TSC
74 //
75 // Wait until the ACPI timer has counted 1ms.
76 // Timer wrap-arounds are handled correctly by this function.
77 // When the current ACPI timer value is greater than 'Ticks', the while loop will exit.
78 //
79 while (((Ticks - IoRead32 (TimerAddr)) & BIT23) == 0) {
80 CpuPause();
81 }
82 EndTSC = AsmReadTsc(); // TSC value 1ms later
83
84 TscFrequency = MultU64x32 (
85 (EndTSC - StartTSC), // Number of TSC counts in 1ms
86 1000 // Number of ms in a second
87 );
88
89 return TscFrequency;
90 }
91
92 /** Stalls the CPU for at least the given number of ticks.
93
94 Stalls the CPU for at least the given number of ticks. It's invoked by
95 MicroSecondDelay() and NanoSecondDelay().
96
97 @param[in] Delay A period of time to delay in ticks.
98
99 **/
100 VOID
InternalX86Delay(IN UINT64 Delay)101 InternalX86Delay (
102 IN UINT64 Delay
103 )
104 {
105 UINT64 Ticks;
106
107 //
108 // The target timer count is calculated here
109 //
110 Ticks = AsmReadTsc() + Delay;
111
112 //
113 // Wait until time out
114 // Timer wrap-arounds are NOT handled correctly by this function.
115 // Thus, this function must be called within 10 years of reset since
116 // Intel guarantees a minimum of 10 years before the TSC wraps.
117 //
118 while (AsmReadTsc() <= Ticks) CpuPause();
119 }
120
121 /** Stalls the CPU for at least the specified number of MicroSeconds.
122
123 @param[in] MicroSeconds The minimum number of microseconds to delay.
124
125 @return The value of MicroSeconds input.
126
127 **/
128 UINTN
129 EFIAPI
MicroSecondDelay(IN UINTN MicroSeconds)130 MicroSecondDelay (
131 IN UINTN MicroSeconds
132 )
133 {
134 InternalX86Delay (
135 DivU64x32 (
136 MultU64x64 (
137 InternalGetTscFrequency (),
138 MicroSeconds
139 ),
140 1000000u
141 )
142 );
143 return MicroSeconds;
144 }
145
146 /** Stalls the CPU for at least the specified number of NanoSeconds.
147
148 @param[in] NanoSeconds The minimum number of nanoseconds to delay.
149
150 @return The value of NanoSeconds input.
151
152 **/
153 UINTN
154 EFIAPI
NanoSecondDelay(IN UINTN NanoSeconds)155 NanoSecondDelay (
156 IN UINTN NanoSeconds
157 )
158 {
159 InternalX86Delay (
160 DivU64x32 (
161 MultU64x32 (
162 InternalGetTscFrequency (),
163 (UINT32)NanoSeconds
164 ),
165 1000000000u
166 )
167 );
168 return NanoSeconds;
169 }
170
171 /** Retrieves the current value of the 64-bit free running Time-Stamp counter.
172
173 The time-stamp counter (as implemented in the P6 family, Pentium, Pentium M,
174 Pentium 4, Intel Xeon, Intel Core Solo and Intel Core Duo processors and
175 later processors) is a 64-bit counter that is set to 0 following a RESET of
176 the processor. Following a RESET, the counter increments even when the
177 processor is halted by the HLT instruction or the external STPCLK# pin. Note
178 that the assertion of the external DPSLP# pin may cause the time-stamp
179 counter to stop.
180
181 The properties of the counter can be retrieved by the
182 GetPerformanceCounterProperties() function.
183
184 @return The current value of the free running performance counter.
185
186 **/
187 UINT64
188 EFIAPI
GetPerformanceCounter(VOID)189 GetPerformanceCounter (
190 VOID
191 )
192 {
193 return AsmReadTsc();
194 }
195
196 /** Retrieves the 64-bit frequency in Hz and the range of performance counter
197 values.
198
199 If StartValue is not NULL, then the value that the performance counter starts
200 with, 0x0, is returned in StartValue. If EndValue is not NULL, then the value
201 that the performance counter end with, 0xFFFFFFFFFFFFFFFF, is returned in
202 EndValue.
203
204 The 64-bit frequency of the performance counter, in Hz, is always returned.
205 To determine average processor clock frequency, Intel recommends the use of
206 EMON logic to count processor core clocks over the period of time for which
207 the average is required.
208
209
210 @param[out] StartValue Pointer to where the performance counter's starting value is saved, or NULL.
211 @param[out] EndValue Pointer to where the performance counter's ending value is saved, or NULL.
212
213 @return The frequency in Hz.
214
215 **/
216 UINT64
217 EFIAPI
GetPerformanceCounterProperties(OUT UINT64 * StartValue,OPTIONAL OUT UINT64 * EndValue OPTIONAL)218 GetPerformanceCounterProperties (
219 OUT UINT64 *StartValue, OPTIONAL
220 OUT UINT64 *EndValue OPTIONAL
221 )
222 {
223 if (StartValue != NULL) {
224 *StartValue = 0;
225 }
226 if (EndValue != NULL) {
227 *EndValue = 0xFFFFFFFFFFFFFFFFull;
228 }
229
230 return InternalGetTscFrequency ();
231 }
232
233 /**
234 Converts elapsed ticks of performance counter to time in nanoseconds.
235
236 This function converts the elapsed ticks of running performance counter to
237 time value in unit of nanoseconds.
238
239 @param Ticks The number of elapsed ticks of running performance counter.
240
241 @return The elapsed time in nanoseconds.
242
243 **/
244 UINT64
245 EFIAPI
GetTimeInNanoSecond(IN UINT64 Ticks)246 GetTimeInNanoSecond (
247 IN UINT64 Ticks
248 )
249 {
250 UINT64 Frequency;
251 UINT64 NanoSeconds;
252 UINT64 Remainder;
253 INTN Shift;
254
255 Frequency = GetPerformanceCounterProperties (NULL, NULL);
256
257 //
258 // Ticks
259 // Time = --------- x 1,000,000,000
260 // Frequency
261 //
262 NanoSeconds = MultU64x32 (DivU64x64Remainder (Ticks, Frequency, &Remainder), 1000000000u);
263
264 //
265 // Ensure (Remainder * 1,000,000,000) will not overflow 64-bit.
266 // Since 2^29 < 1,000,000,000 = 0x3B9ACA00 < 2^30, Remainder should < 2^(64-30) = 2^34,
267 // i.e. highest bit set in Remainder should <= 33.
268 //
269 Shift = MAX (0, HighBitSet64 (Remainder) - 33);
270 Remainder = RShiftU64 (Remainder, (UINTN) Shift);
271 Frequency = RShiftU64 (Frequency, (UINTN) Shift);
272 NanoSeconds += DivU64x64Remainder (MultU64x32 (Remainder, 1000000000u), Frequency, NULL);
273
274 return NanoSeconds;
275 }
276