169       NXPLOG_NCIHAL_E("NFC client received bad message");  in phNxpNciHal_client_thread()
318      NXPLOG_NCIHAL_E("FW download denied while SPI in use, Continue NFC init");  in phNxpNciHal_fw_download()
340         NXPLOG_NCIHAL_E("Unknown chip type, FW can't be upgraded");  in phNxpNciHal_fw_download()
364       NXPLOG_NCIHAL_E("FW download failed, Continue NFCC init");  in phNxpNciHal_fw_download()
377     NXPLOG_NCIHAL_E("TML Read status error status = %x", readRestoreStatus);  in phNxpNciHal_fw_download()
380       NXPLOG_NCIHAL_E("TML Shutdown failed. Status  = %x", readRestoreStatus);  in phNxpNciHal_fw_download()
390       NXPLOG_NCIHAL_E("Failed to restore GPIO values!!!\n");  in phNxpNciHal_fw_download()
461     NXPLOG_NCIHAL_E(  in phNxpNciHal_CheckValidFwVersion()
465     NXPLOG_NCIHAL_E("Wrong FW Version >>> Firmware download not allowed");  in phNxpNciHal_CheckValidFwVersion()
554     NXPLOG_NCIHAL_E("phNxpNciHal_MinOpen(): already open");  in phNxpNciHal_MinOpen()
571     NXPLOG_NCIHAL_E("Init monitor failed");  in phNxpNciHal_MinOpen()
596     NXPLOG_NCIHAL_E("malloc of nfc_dev_node failed ");  in phNxpNciHal_MinOpen()
600     NXPLOG_NCIHAL_E(  in phNxpNciHal_MinOpen()
617     NXPLOG_NCIHAL_E("phTmlNfc_Init Failed");  in phNxpNciHal_MinOpen()
634     NXPLOG_NCIHAL_E("pthread_create failed");  in phNxpNciHal_MinOpen()
646     NXPLOG_NCIHAL_E("TML Read status error status = %x", status);  in phNxpNciHal_MinOpen()
658     NXPLOG_NCIHAL_E("Force FW Download, NFCC not coming out from Standby");  in phNxpNciHal_MinOpen()
663     NXPLOG_NCIHAL_E("NCI_CORE_RESET: Failed");  in phNxpNciHal_MinOpen()
680       NXPLOG_NCIHAL_E("Chip is in NCI1.0 mode reset the chip to 2.0 mode");  in phNxpNciHal_MinOpen()
691     NXPLOG_NCIHAL_E("NCI_CORE_INIT : Failed");  in phNxpNciHal_MinOpen()
705   NXPLOG_NCIHAL_E("FW version for FW file = 0x%x", wFwVer);  in phNxpNciHal_MinOpen()
706   NXPLOG_NCIHAL_E("FW version from device = 0x%x", wFwVerRsp);  in phNxpNciHal_MinOpen()
764     NXPLOG_NCIHAL_E("phNxpNciHal_open already open");  in phNxpNciHal_open()
769       NXPLOG_NCIHAL_E("phNxpNciHal_MinOpen failed");  in phNxpNciHal_open()
979     NXPLOG_NCIHAL_E("write_unlocked status error");  in phNxpNciHal_write_unlocked()
986     NXPLOG_NCIHAL_E("write_unlocked semaphore error");  in phNxpNciHal_write_unlocked()
994       NXPLOG_NCIHAL_E(  in phNxpNciHal_write_unlocked()
1000       NXPLOG_NCIHAL_E(  in phNxpNciHal_write_unlocked()
1049     NXPLOG_NCIHAL_E("write error status = 0x%x", pInfo->wStatus);  in phNxpNciHal_write_complete()
1131     NXPLOG_NCIHAL_E("read error status = 0x%x", pInfo->wStatus);  in phNxpNciHal_read_complete()
1136     NXPLOG_NCIHAL_E("Ignoring read, HAL close triggered");  in phNxpNciHal_read_complete()
1144     NXPLOG_NCIHAL_E("read status error status = %x", status);  in phNxpNciHal_read_complete()
1157     NXPLOG_NCIHAL_E("read status error status = %x", status);  in read_retry()
1235       NXPLOG_NCIHAL_E("Force FW Download, NFCC not coming out from Standby");  in phNxpNciHal_core_initialized()
1239       NXPLOG_NCIHAL_E("NCI_CORE_RESET: Failed");  in phNxpNciHal_core_initialized()
1245       NXPLOG_NCIHAL_E(" Last command is CORE_RESET!!");  in phNxpNciHal_core_initialized()
1255       NXPLOG_NCIHAL_E("NCI_CORE_INIT : Failed");  in phNxpNciHal_core_initialized()
1261       NXPLOG_NCIHAL_E(" Last command is CORE_INIT!!");  in phNxpNciHal_core_initialized()
1279       NXPLOG_NCIHAL_E("NXP ACT Proprietary Ext failed");  in phNxpNciHal_core_initialized()
1288     NXPLOG_NCIHAL_E("cmd_ven_pulld_enable_nci: Failed");  in phNxpNciHal_core_initialized()
1300     NXPLOG_NCIHAL_E("NXP GET MW EEPROM AREA Proprietary Ext failed");  in phNxpNciHal_core_initialized()
1308     NXPLOG_NCIHAL_E("phNxpNciHal_check_clock_config failed");  in phNxpNciHal_core_initialized()
1344         NXPLOG_NCIHAL_E("NXP DPLL REG ACT Proprietary Ext failed");  in phNxpNciHal_core_initialized()
1365       NXPLOG_NCIHAL_E("NXP ACT Proprietary Ext failed");  in phNxpNciHal_core_initialized()
1384             NXPLOG_NCIHAL_E("EXT TVDD CFG 1 Settings failed");  in phNxpNciHal_core_initialized()
1395             NXPLOG_NCIHAL_E("EXT TVDD CFG 2 Settings failed");  in phNxpNciHal_core_initialized()
1406             NXPLOG_NCIHAL_E("EXT TVDD CFG 3 Settings failed");  in phNxpNciHal_core_initialized()
1412         NXPLOG_NCIHAL_E("Wrong Configuration Value %ld", num);  in phNxpNciHal_core_initialized()
1432         NXPLOG_NCIHAL_E("RF Settings BLK 1 failed");  in phNxpNciHal_core_initialized()
1454         NXPLOG_NCIHAL_E("RF Settings BLK 2 failed");  in phNxpNciHal_core_initialized()
1476         NXPLOG_NCIHAL_E("RF Settings BLK 3 failed");  in phNxpNciHal_core_initialized()
1498         NXPLOG_NCIHAL_E("RF Settings BLK 4 failed");  in phNxpNciHal_core_initialized()
1520         NXPLOG_NCIHAL_E("RF Settings BLK 5 failed");  in phNxpNciHal_core_initialized()
1542         NXPLOG_NCIHAL_E("RF Settings BLK 6 failed");  in phNxpNciHal_core_initialized()
1556         NXPLOG_NCIHAL_E("NXP Core configuration failed");  in phNxpNciHal_core_initialized()
1570       NXPLOG_NCIHAL_E("NXP configure UICC/eSE failed.");  in phNxpNciHal_core_initialized()
1592         NXPLOG_NCIHAL_E("Setting NXP_CORE_RF_FIELD status failed");  in phNxpNciHal_core_initialized()
1620           NXPLOG_NCIHAL_E("SWP switch timeout Setting Failed");  in phNxpNciHal_core_initialized()
1625         NXPLOG_NCIHAL_E("SWP switch timeout Setting Failed - out of range!");  in phNxpNciHal_core_initialized()
1631       NXPLOG_NCIHAL_E("phNxpNciHal_china_tianjin_rf_setting failed");  in phNxpNciHal_core_initialized()
1637       NXPLOG_NCIHAL_E("NXP Update MW EEPROM Proprietary Ext failed");  in phNxpNciHal_core_initialized()
1649       NXPLOG_NCIHAL_E("Core Set Config failed");  in phNxpNciHal_core_initialized()
1664       NXPLOG_NCIHAL_E("P2P listen mode routing failed");  in phNxpNciHal_core_initialized()
1679         NXPLOG_NCIHAL_E("SWP FULL PWR MODE SETTING ON CMD FAILED");  in phNxpNciHal_core_initialized()
1688         NXPLOG_NCIHAL_E("SWP FULL PWR MODE SETTING OFF CMD FAILED");  in phNxpNciHal_core_initialized()
1703         NXPLOG_NCIHAL_E("Android L AID Matching Platform Setting Failed");  in phNxpNciHal_core_initialized()
1713         NXPLOG_NCIHAL_E("Android L AID Matching Platform Setting Failed");  in phNxpNciHal_core_initialized()
1729     NXPLOG_NCIHAL_E(  in phNxpNciHal_core_initialized()
1735       NXPLOG_NCIHAL_E(  in phNxpNciHal_core_initialized()
1741     NXPLOG_NCIHAL_E("Sending DH and NFCC mode set as raw packet!!");  in phNxpNciHal_core_initialized()
1746       NXPLOG_NCIHAL_E("Sending DH and NFCC mode set as raw packet!! Failed");  in phNxpNciHal_core_initialized()
1751     NXPLOG_NCIHAL_E("Sending UICC Select Command as raw packet!!");  in phNxpNciHal_core_initialized()
1754       NXPLOG_NCIHAL_E("Sending UICC Select Command as raw packet!! Failed");  in phNxpNciHal_core_initialized()
1761       NXPLOG_NCIHAL_E("Sending Set Screen ON State Command as raw packet!!");  in phNxpNciHal_core_initialized()
1765         NXPLOG_NCIHAL_E(  in phNxpNciHal_core_initialized()
1771       NXPLOG_NCIHAL_E("Sending discovery as raw packet!!");  in phNxpNciHal_core_initialized()
1775         NXPLOG_NCIHAL_E("Sending discovery as raw packet Failed");  in phNxpNciHal_core_initialized()
1781       NXPLOG_NCIHAL_E("Sending Set Screen OFF State Command as raw packet!!");  in phNxpNciHal_core_initialized()
1786         NXPLOG_NCIHAL_E(  in phNxpNciHal_core_initialized()
1792     NXPLOG_NCIHAL_E("Sending last command for Recovery ");  in phNxpNciHal_core_initialized()
1835           NXPLOG_NCIHAL_E("Sending last command for Recovery Failed");  in phNxpNciHal_core_initialized()
1859       NXPLOG_NCIHAL_E("Invoking data callback!!");  in phNxpNciHal_core_initialized()
1937         NXPLOG_NCIHAL_E("TML Read status error status = %x", status);  in phNxpNciHalRFConfigCmdRecSequence()
2009     NXPLOG_NCIHAL_E("phNxpNciHal_close is already closed, ignoring close");  in phNxpNciHal_close()
2019       NXPLOG_NCIHAL_E("CMD_VEN_DISABLE_NCI: Failed");  in phNxpNciHal_close()
2027     NXPLOG_NCIHAL_E("NCI_CORE_RESET: Failed");  in phNxpNciHal_close()
2095     NXPLOG_NCIHAL_E("NCI_HAL_CLOSE: Failed");  in phNxpNciHal_configDiscShutdown()
2424       NXPLOG_NCIHAL_E("%s : Wrong arg = %ld", __func__, arg);  in phNxpNciHal_ioctl()
2454     NXPLOG_NCIHAL_E("unable to get the mw eeprom data");  in phNxpNciHal_get_mw_eeprom()
2494     NXPLOG_NCIHAL_E("unable to update the mw eeprom data");  in phNxpNciHal_set_mw_eeprom()
2538       NXPLOG_NCIHAL_E("Wrong clock freq, send default PLL@19.2MHz");  in phNxpNciHal_set_clock()
2550       NXPLOG_NCIHAL_E("PLL colck setting failed !!");  in phNxpNciHal_set_clock()
2557       NXPLOG_NCIHAL_E("XTAL colck setting failed !!");  in phNxpNciHal_set_clock()
2560     NXPLOG_NCIHAL_E("Wrong clock source. Dont apply any modification")  in phNxpNciHal_set_clock()
2567       NXPLOG_NCIHAL_E("Set-clk failed retry again ");  in phNxpNciHal_set_clock()
2599     NXPLOG_NCIHAL_E("unable to retrieve get_clk_src_sel");  in phNxpNciHal_check_clock_config()
2640     NXPLOG_NCIHAL_E("unable to get the RF setting");  in phNxpNciHal_china_tianjin_rf_setting()
2647     NXPLOG_NCIHAL_E("GET_CONFIG_RSP is FAILED for CHINA TIANJIN");  in phNxpNciHal_china_tianjin_rf_setting()
2669         NXPLOG_NCIHAL_E("unable to set the RF setting");  in phNxpNciHal_china_tianjin_rf_setting()
2701       NXPLOG_NCIHAL_E("Failed to get GPIO values!!!\n");  in phNxpNciHal_gpio_restore()
2712       NXPLOG_NCIHAL_E("Failed to set GPIO values!!!\n");  in phNxpNciHal_gpio_restore()
2720       NXPLOG_NCIHAL_E("Failed to get GPIO values!!!\n");  in phNxpNciHal_gpio_restore()
2732       NXPLOG_NCIHAL_E("Failed to set GPIO values!!!\n");  in phNxpNciHal_gpio_restore()
2736       NXPLOG_NCIHAL_E("GPIO Restore Invalid Option!!!\n");  in phNxpNciHal_gpio_restore()
2756     NXPLOG_NCIHAL_E("Retry: NCI_CORE_RESET");  in phNxpNciHal_nfcc_core_reset_init()
2760       NXPLOG_NCIHAL_E("NCI_CORE_RESET failed!!!\n");  in phNxpNciHal_nfcc_core_reset_init()
2775     NXPLOG_NCIHAL_E("Retry: NCI_CORE_INIT\n");  in phNxpNciHal_nfcc_core_reset_init()
2779     NXPLOG_NCIHAL_E("NCI_CORE_INIT failed!!!\n");  in phNxpNciHal_nfcc_core_reset_init()
2805       NXPLOG_NCIHAL_E("Retry: get chip info");  in phNxpNciHal_getChipInfoInFwDnldMode()
2809       NXPLOG_NCIHAL_E("Failed: get chip info");  in phNxpNciHal_getChipInfoInFwDnldMode()
2838       NXPLOG_NCIHAL_E("Wrong clock freq, send default PLL@19.2MHz");  in check_config_parameter()
2845     NXPLOG_NCIHAL_E("Wrong clock source. Dont apply any modification")  in check_config_parameter()
2876     NXPLOG_NCIHAL_E("unable to retrieve  get_i2c_fragmentation_cmd");  in phNxpNciHal_enable_i2c_fragmentation()
2893           NXPLOG_NCIHAL_E("NXP fragmentation enable failed");  in phNxpNciHal_enable_i2c_fragmentation()
2902           NXPLOG_NCIHAL_E("NXP fragmentation disable failed");  in phNxpNciHal_enable_i2c_fragmentation()
2907         NXPLOG_NCIHAL_E("NCI_CORE_RESET: Failed");  in phNxpNciHal_enable_i2c_fragmentation()
2916         NXPLOG_NCIHAL_E("NCI_CORE_INIT : Failed");  in phNxpNciHal_enable_i2c_fragmentation()
2957       NXPLOG_NCIHAL_E("%s: NXP Nfc Open failed", __func__);  in phNxpNciHal_do_factory_reset()
2963     NXPLOG_NCIHAL_E("%s failed. status = %x ",__func__, status);  in phNxpNciHal_do_factory_reset()