Lines Matching refs:configure

3 	* configure.ac (tilepro-*-*): Add gdb to noconfigdirs.
4 	* configure: Regenerate.
8 	* Makefile.tpl (configure): Depend on m4 files included.
38 	* configure.ac: Add mips and s390 to the gold target check.
39 	* configure: Regenerate.
47 	* configure.ac: Enable LTO for DJGPP
48 	* configure: Regenerate
61 	* configure: Regenerate.
67 	* configure: Regenerate.
89 	* configure.ac: Enable libmpx by default.
90 	* configure: Regenerated.
114 	* configure: Regenerate.
121 	* configure.ac: Same.
123 	* configure: Regenerate.
132 	* configure.ac: Add aarch64-*-darwin* and arm-*-darwin*.
133 	* configure: Regenerate.
138 	* configure.ac: Note the 'none' is an acceptable argument to
140 	* configure: Regenerate.
145 	* configure.ac: Add
147 	* configure: Regenerated.
163 	* configure.ac: Remove --with_host_libstdcxx support.
164 	* configure: Regenerate.
169 	* configure.ac (noconfigdirs): Don't add "target-libgomp" for target
171 	* configure: Regenerate.
184 	(configure-gcc): Depend on all-libiconv.
186 	(configure-libcpp): Ditto.
188 	(configure-intl): Ditto.
198 	* config-ml.in: Reflects renaming of configure.in to configure.ac
199 	* configure: Likewise
200 	* configure.ac: Likewise
225 	* configure.ac: FT32 target added.
226 	* configure: Regenerate.
234 	* configure.ac: Use -std=gnu++98.
238 	* configure.ac (--vtable-verify): Use AS_HELP_STRING for help.
239 	* configure: Regenerate.
243 	* configure.ac: Fix typo.
244 	* configure: Regenerate.
248 	* configure.ac: Match $host configured with triplets.
249 	* configure: Regenerate.
254 	* configure.ac (--enable-stage1-checking): Default to
258 	* configure: Regenerated.
266 	* configure.ac (ospace_frag): Enable for i?86*-*-elfiamcu
268 	* configure: Regenerate.
272 	* configure.ac: Disable configuration of GDB for HPUX targets.
273 	* configure: Regenerate.
279 	* configure.ac (extra_host_zlib_configure_flags): New.  Set
302 	* configure.ac: Add --with-system-zlib.
303 	* configure: Regenerated.
307 	* src-release.sh: Don't configure with  --with-target-subdir=.
336 	* configure.ac (target_configdirs): Exclude target-zlib if
338 	* configure: Regenerated.
351 	* configure.ac: Likewise.
353 	* configure: Likewise.
357 	* configure.ac: Add FT32 support.
358 	* configure: Regenerate.
362 	* configure.ac: Don't disable gprof for moxie.
363 	* configure: Rebuild.
373 	* configure.ac: Check for already installed target objcopy.
375 	* configure: Regenerate.
414 	* configure.ac: Add aarch64 to list of targets that support gold.
415 	* configure: Regenerate.
419 	* configure.ac: Add mips*-img-elf* target triple.
420 	* configure: Regenerate.
423 	* configure: Disable gdb for nds32*-*-* until supported.
424 	* configure.ac: Disable gdb for nds32*-*-* until supported.
428 	* configure: Regenerate.
438 	* configure.ac (or1k*-*-rtems*): gdb not supported.  The ordering
440 	* configure. Regenerated.
449 	* configure.ac (or1k*-*-*): Disable gdb.
450 	* configure: Regenerated.
454 	* configure.ac (target_makefile_frag): Set for nios2-*-elf*.
455 	* configure: Regenerated.
461 	* configure.ac: Don't bootstrap host fixincludes unless
464 	* configure: Regenerated.
468 	* configure.ac: Move BUILD_CONFIG set up earlier.  Add
474 	* configure: Regenerated.
485 	* configure.ac (tilepro-*-*) Change to tilepro*-*-*.
487 	* configure: Regenerate.
532 	* configure.ac: Add user-friendly check for native x86_64-linux
534 	* configure: Regenerate.
549 	* configure.ac: Added libcilkrts to noconfig list when C++ is not
551 	* configure: Regenerated.
562 	* configure: Regenerate.
563 	* configure.ac: Added libcilkrts to target binaries.  Also, restrict
573 	* configure.ac (target_libraries): Remove target-libmudflap.
575 	* configure: Rebuilt.
580 	* configure.ac: Update from GCC.
581 	* configure: Regenerate.
592 	* configure.ac: Update from GCC.
593 	* configure: Regenerate.
601 	* configure.ac: Update from GCC.
602 	* configure: Regenerate.
616 	* configure.ac: Sync with GCC repo.
618 	* configure: Regenerate.
628 	* configure.ac (mips*-*-bsd*, mips*-*-ultrix*, mips*-*-osf*)
631 	* configure: Regenerate.
654 	* configure.ac: Sync with GCC.
655 	* configure: Regenerate.
659 	* src-release (VER): Change bfd/configure.in sed to use the new
660 	`bfd/configure --version` output.
664 	* configure.ac: Sync with GCC repo.
665 	* configure: Ditto.
670 	* configure.ac: Disable libgo on some systems where it does not
672 	* configure: Rebuild.
676 	* configure: Regenerate after syncing config/.
680 	* configure.ac: Sync with GCC repo.
681 	* configure: Ditto.
704 	* Makefile.def (configure-gcc): Depend on all-gmp.
742 	* configure.ac (ENABLE_GOLD): Consider *-*-gnu* targets ELF.
743 	* configure: Regenerate.
749 	* configure.ac (bootstrap_target_libs): Add libsanitizer.
751 	* configure: Likewise.
759 	* configure.ac: Merge from GCC.
762 	* configure: Ditto.
766 	* configure.ac (noconfigdirs): Merge from GCC.
767 	* configure: Regenerate.
775 	* configure.ac (ENABLE_GOLD): Consider *-*-nacl* targets ELF.
776 	* configure: Regenerate.
780 	* configure.ac: Move libsanitizer logic to subdirectory.
781 	* configure: Regenerate.
785 	* configure.ac: Enable libsanitizer just on x86 linux for now.
786 	* configure: Re-generate.
790 	* configure.ac: Merge libquadmath sections.
791 	* configure: Regenerate.
795 	* configure.ac: Add libsanitizer to target_libraries.
797 	* configure: Regenerate.
802 	* configure: Regenerated.
806 	* configure.ac: add --disable-libstdcxx configure option
811 	* configure.ac (FLAGS_FOR_TARGET,target=cygwin): Fix for building
813 	* configure: Regenerate.
818 	* configure.ac (have_static_libs): Force 'no' for GCC version < 4.5.
819 	* configure: Regenerate.
830 	* configure.ac (have_static_libs): New variable and associated check.
833 	* configure: Regenerate.
853 	* configure.ac: Bump minimum GMP version to 4.2.3.
854 	* configure: Re-generate.
859 	* configure.ac (noconfigdirs,target=avr-*-*): Add target-newlib,
861 	* configure: Regenerate.
865 	* configure.ac: Fix --enable-languages=all.
870 	* configure.ac: Re-organize ISL / CLOOG checks to allow
872 	* configure: Regenerated.
876 	* configure.ac (noconfigdirs,target=avr): Add target-libquadmath.
877 	* configure: Regenerate.
881 	* configure.ac: Add mips*-mti-elf* target.
882 	* configure: Regenerate.
886 	* configure.ac (host_libs): Add libbacktrace.
890 	* configure, Makefile.in: Rebuild.
894 	* configure.ac (ENABLE_GOLD): support tilegx*
895 	* configure: rebuild
903 	* configure.ac: Add target-libquadmath to noconfigdirs for AIX.
905 	* configure: Regenerate.
921 	* configure.ac (ENABLE_BUILD_WITH_CXX): Remove.  Update all users.
923 	* configure: Regenerate.
931 	* configure: Likewise.
935 	* configure.ac (extra_isl_gmp_configure_flags): Initialize and subst.
938 	* configure: Regenerated.
951 	* configure.ac: If either the ISL or the CLooG check failed
954 	* configure: Regenerated.
964 	* configure.ac: Include config/isl.m4.  Add ISL host library,
968 	* configure: Likewise.
975 	* configure: Regenerated.
982 	* configure: Regenerated.
983 	* configure.ac: Require cloog isl 0.17.0
987 	* configure: Regenerated.
992 	* configure.ac: Skip C if explicitly selected.
993 	* configure: Regenerate.
997 	* configure.ac (CFLAGS_FOR_TARGET, CXXFLAGS_FOR_TARGET): Make sure
999 	* configure: Regenerate.
1019 	* configure.ac (mpfr-dir): When using in-tree MPFR sources
1022 	* configure: Regenerate.
1026 	* configure.ac: Bump minimum MPFR version to 2.4.0.
1027 	* configure: Regenerated.
1032 	* configure.ac (target_libraries): Add libatomic.
1034 	* Makefile.in, configure: Rebuild.
1047 	* configure.ac (CFLAGS_FOR_TARGET, CXXFLAGS_FOR_TARGET): Make sure
1049 	* configure: Regenerate.
1064 	* configure.ac (mpfr-dir): When using in-tree MPFR sources
1067 	* configure: Regenerate.
1071 	* configure.ac (ENABLE_GOLD): Consider *-*-nacl* targets ELF.
1072 	* configure: Regenerate.
1080 	* configure.ac (ia64*-*-*vms*): Add support for ld.
1081 	* configure: Regenerate.
1085 	* configure.ac (enable_libgomp): Remove *-*-irix6*.
1089 	* configure: Regenerate.
1093 	* configure.ac (enable_libgomp): Remove *-*-osf*.
1095 	* configure: Regenerate.
1109 	* configure.ac: Enable gdb and readline for ia64*-*-*vms*.
1110 	* configure: Regenerate.
1119 	* configure: Regenerate.
1127 	* configure.ac: Add tool checks for READELF and READELF_FOR_TARGET.
1128 	* configure: Rebuild.
1139 	* configure.ac: Test for libitm directory present first.
1141 	* configure.ac: Adjust srcdir for running libitm/configure.tgt.
1143 	* configure.ac: Test libitm/configure.tgt to disable libitm.
1144 	* configure: Rebuild.
1154 	* configure.ac (rl78-*-*) New case.
1155 	* configure: Regenerate.
1194 	* configure.ac (tic6x-*-*): Remove gdb from noconfigdirs.
1195 	* configure: Regenerate.
1202 	* configure.ac: Set have_compiler based on whether gcc directory
1204 	* configure: Rebuild.
1213 	* configure.ac: Move --enable-bootstrap handling earlier in file.
1216 	* configure: Rebuild.
1219 	* configure.ac: Add --enable-build-poststage1-with-cxx.  If set,
1224 	* configure, Makefile.in: Rebuild.
1236 	* configure.ac: Pass --disable-static in EXTRA_CONFIGARGS_LIBJAVA,
1239 	* configure: Likewise.
1247 	* configure.ac (target_libraries): Remove target-libiberty.
1254 	* configure, Makefile.in: Regenerate.
1265 	* configure: Regenerate.
1270 	* configure.ac (i[3456789]86-*-solaris2*): Also accept
1272 	* configure: Regenerate.
1276 	* configure.ac (tilepro-*-*) New case.
1278 	* configure: Regenerate.
1290 		* configure.ac: Propagate LDFLAGS_FOR_TARGET.
1291 		* configure: Regenerated.
1293 		value from configure.
1298 	* configure.ac (alpha*-dec-osf*, i[[3456789]]86-*-rdos*,
1327 	* configure: Regenerate.
1331 	* configure.ac: Remove code setting special library locations for
1334 	* configure: Regenerate.
1338 	* configure.ac: Separate libgloss_dir settings from general case
1340 	* configure: Regenerate.
1344 	* configure.ac (*-*-dragonfly*, *-*-freebsd*, *-*-netbsd*,
1363 	* configure: Regenerate.
1367 	* configure.ac: Disable Java for targets not supporting libffi.
1390 	* configure: Regenerate.
1399 	* configure.ac: Re-enable LTO on *-apple-darwin9*.
1400 	* configure: Regenerate.
1404 	* configure.ac: Separate cases disabling Java and Java libraries
1406 	* configure: Regenerate.
1410 	* configure.ac (build_tools): Remove build-byacc.
1419 	* configure: Regenerate.
1434 	* configure.ac (avr-*-*): Add comment about why libssp is disabled.
1436 	* configure: Regenerate.
1440 	* configure.ac: Remove code setting CONFIG_SHELL, config_shell and
1442 	* configure: Regenerate.
1448 	* configure.ac (*-*-sysv4*): Don't enable libgomp.
1455 	* configure: Regenerate.
1459 	* configure.ac: Separate cases disabling target-libssp,
1462 	* configure: Regenerate.
1466 	* configure.ac (*-*-chorusos): Don't disable libgcj.
1501 	* configure: Regenerate.
1505 	* configure.ac (i[[3456789]]86-*-msdosdjgpp*): Don't disable
1510 	* configure: Regenerate.
1514 	* configure.ac: Add support for *-*-dragonfly*
1515 	* configure: Regenerate.
1519 	* configure.ac (native_only): Remove.
1542 	* configure: Regenerate.
1546 	* configure.ac (target_tools): Remove target-groff.
1559 	* configure: Regenerate.
1563 	* configure.ac: Remove references to mt-mep, mt-netware,
1567 	* configure: Regenerate.
1576 	* configure.ac: Do not include mh-x86omitfp.
1577 	* configure: Regenerate.
1581 	* configure.ac: Remove empty cases.
1582 	* configure: Regenerate.
1591 	* configure.ac: Remove all mentions of mh-sysv4 and mh-solaris.
1592 	* configure: Regenerate.
1599 	* configure.ac: Remove all mentions of tentative_cc.
1600 	* configure: Regenerate.
1605 	* configure.ac: Re-enable LTO on *-apple-darwin9.
1606 	* configure: Regenerate.
1610 	* configure.ac (i[[3456789]]86-*-vsta, i[[3456789]]86-*-go32*,
1621 	* configure: Regenerate.
1625 	* configure.ac (ppc*-*-pe): Remove host case.
1630 	* configure: Regenerate.
1638 	* configure.ac (arm-semi-aof, crx-*-*, parisc*-*-linux*,
1641 	* configure: Regenerate.
1646 	* configure.ac (arc-*-*, crx-*-*, i[[3456789]]86-*-pe,
1649 	* configure: Regenerate.
1654 	* configure.ac (pwllib): Use LIBS instead of LDFLAGS.
1656 	* configure: Regenerate.
1665 	* configure.ac: Adjust test of with_ppl.
1666 	* configure: Regenerated.
1670 	* configure.ac: Add -lpwl to ppllibs.
1672 	* configure: Regenerated.
1706 	(configure-gcc): Depend on all-lto-plugin.
1711 	* configure.ac: Remove extra bracket.
1712 	* configure: Regenerate.
1723 	* configure.ac: If with_ppl is no, move setting with_cloog=no
1725 	* configure: Regenerated.
1729 	* configure.ac: Call AC_MSG_ERROR when PPL 0.11 is not present and
1731 	* configure: Regenerated.
1735 	* configure: Regenerated.
1736 	* configure.ac: Check for version 0.11 (or later revision) of PPL.
1740 	* configure: Regenerated.
1741 	* configure.ac: Use CLOOG_CHECK_VERSION(0,16,1).
1748 	configure.
1753 	* configure.ac: Discard --with-* flags for host when configuring
1755 	* configure: Rebuilt.
1763 	* configure.ac: Use AS_HELP_STRING throughout.
1764 	* configure: Regenerate.
1768 	* configure.ac (bfin-*-*): Remove gdb from noconfigdirs.
1769 	* configure: Regenerate.
1777 	* configure.ac: Remove readline, mmalloc, and gdb from noconfigdirs
1779 	* configure: Regenerate.
1786 	* configure.ac: (picochip): Disable libiberty.
1787 	* configure: Regenerate.
1796 	* configure.ac: For --disable-libgcj clear libgcj_saved.
1797 	* configure: Rebuild.
1802 	* configure.ac: Add --disable-libquadmath and
1804 	* configure: Regenerate.
1813 	* configure.ac (cris-*-elf, crisv32-*-elf): Disable target-libffi.
1814 	* configure: Regenerate.
1818 	* configure.ac: Always set default for poststage1_ldflags to
1827 	* configure.ac: Move comment to remove extra space in last argument
1833 	* configure.ac (CXX_FOR_TARGET): Add -funconfigured-libstdc++-v3.
1837 	* configure: Rebuilt.
1843 	* configure.ac: Correct comments for --enable-gold/--enable-ld.
1845 	* configure: Regnerated.
1849 	* configure.ac: For --enable-gold, handle value `default' instead of
1850 	`both*'.   New configure option --{en,dis}able-ld.
1851 	* configure: Regenerate.
1855 	* configure.ac: Only disable a language library if no language needs
1857 	* configure: Rebuild.
1861 	* configure: Regenerate.
1866 	* configure.ac: Fix just-built in-tree STRIP name to be
1868 	* configure: Regenerate.
1882 	* configure.ac: Add target-libgo to target_libraries.  Set
1893 	(dependencies): Add dependency from configure-target-libgo to
1894 	configure-target-libffi and all-target-libstdc++-v3.  Add
1897 	* configure: Rebuild.
1907 	* configure.ac: Check for lang_requires_boot_languages in
1909 	* configure: Rebuild.
1920 	* configure.ac: Add libquadmath.
1923 	* configure: Regenerate.
1927 	* configure.ac: Fix spelling in option names.
1928 	* configure: Regenerated.
1933 	* configure.ac (FLAGS_FOR_TARGET): Add include-fixed path.
1934 	* configure: Regenerated.
1940 	the configure checks, if necessary.
1941 	* configure: Regenerate.
1946 	* configure: regenerate
1951 	* configure: Regenerate.
1956 	* configure: Regenerate.
1960 	* configure.ac: Support official CLooG.org versions.
1961 	* configure: Regenerate.
1971 	* configure.ac (*-*-darwin*): Use mh-darwin for all Darwin variants.
1972 	* configure: Regenerate.
1978 	* configure.ac: Remove libelf tests.  Build lto-plugin on ELF always
1980 	* configure: Rebuild.
1985 	* configure.ac: Error when source path contains spaces.
1986 	* configure: Regenerate.
2004 	* configure.ac (build_lto_plugin): New shell variable.
2009 	* configure: Regenerate.
2015 	* configure.ac: Honor initial values of $build_configargs,
2018 	* configure: Regenerate.
2026 	* configure.ac (microblaze): Add target-libssp to noconfigdirs.
2027 	* configure: Regenerate.
2031 	* configure.ac (enable-lto): Add Darwin to the list of supported lto
2033 	* configure: Regenerate.
2037 	* configure.ac: Enable LTO by default on Darwin.
2038 	* configure: Regenerate.
2043 	* configure.ac (extra_mpfr_configure_flags): Copy from
2045 	* configure: Re-generated.
2061 	* configure.ac: Fix unportable shell quoting.
2062 	* configure: Regenerate.
2066 	* configure.ac: Support all v850 targets.
2067 	* configure: Regenerate.
2079 	* Makefile.def (configure-gcc): Depend on all-libelf.
2091 	* configure.ac: Allow all the versions greater than 0.10 of PPL.
2092 	* configure: Regenerated.
2095 	* configure.ac (BUILD_CONFIG): Redirect output to /dev/null.
2096 	* configure: Regenerate.
2099 	* configure.ac (*-*-rtems*): Add target-libiberty to $skipdirs.
2100 	* configure: Regenerate.
2103 	* configure.ac: Check for elf_getshdrstrndx or elf_getshstrndx
2105 	* configure: Regenerate.
2108 	* configure: Regenerate after change to elf.m4.
2111 	* configure.ac: Add brackets around AC_TRY_COMPILE alternative.
2112 	* configure: Regenerated.
2115 	* configure.ac: Print "buggy but acceptable" when CLooG
2117 	* configure: Regenerated.
2124 	* configure.ac (--enable-lto): All *-apple-darwin* now support LTO.
2125 	* configure: Regenerate.
2128 	* configure.ac (--enable-lto): Add x86_64-apple-darwin* as
2130 	* configure: Regenerate.
2134 	* configure.ac (--enable-lto): Refactor handling so libelf tests
2138 	* configure: Regenerate.
2143 	* configure.ac (--enable-gold): Support both, both/gold and
2145 	* configure: Regenerated.
2152 	* configure.ac (alpha*-*-*vms*): Remove ld from noconfigdirs.
2153 	* configure: Regenerate.
2162 	* configure.ac: Do not pass --enable-multilib nor
2165 	* configure: Regenerate.
2170 	* configure.ac: Do not pass --enable-multilib nor
2173 	* configure: Regenerate.
2177 	* configure.ac (tic6x-*-*): New case.
2178 	* configure: Regenerate.
2185 	* configure.ac: Only pass -c to ranlib for darwin9 and earlier.
2186 	* configure: Regenerate.
2204 	* configure.ac (RANLIB): Default to true.
2207 	* configure: Regenerate.
2219 	* configure.ac: Revert previous delta.
2220 	* configure: Regenerate.
2225 	* configure.ac: Delete config.cache files in sub-directories when
2227 	* configure: Regenerate.
2231 	* configure.ac: Sync from gcc.
2232 	* configure: Regenerate.
2237 	* configure.ac: Add "recommended" version checks for GMP/MPC.
2239 	* configure: Regenerate.
2244 	* configure.ac (bootstrap_target_libs): Make inclusion of
2246 	* configure: Regenerate.
2251 	* configure.ac (bootstrap_target_libs): Include target-libgomp.
2252 	* configure: Regenerate.
2257 	* configure.ac (target_configdirs): Substitute.
2259 	Add dependency of all-target-libstdc++-v3 on configure-target-libgomp.
2262 	* configure, Makefile.in: Regenerate.
2276 	* configure.ac: Include libtool m4 files.
2281 	* configure: Regenerate.
2305 	* configure.ac: Require MPC.
2306 	* configure: Regenerate.
2308 	* configure.ac: Update minimum MPC version to 0.8.
2309 	* configure: Regenerate.
2323 	* configure.ac: Add libelf to host_libs.  Enable in-tree configury
2327 	* configure: Rebuild.
2335 	(configure-stage[+id+]-[+prefix+][+module+]): Use it.  Add
2338 	(configure-[+prefix+][+module+], all-[+prefix+][+module+]): Add
2344 	* configure.ac (FLAGS_FOR_TARGET):  Add -L and -isystem
2346 	* configure: Regenerated.
2350 	* configure.ac: Disable target-winsup & co for
2352 	* configure: Regenerated.
2356 	* configure.ac (CLooG test): Use = with test.
2357 	* configure: Regenerate.
2361 	* configure.ac: Do not set LIBS for ppl/cloog checks.  Disable
2364 	* configure: Regenerate.
2368 	* configure.ac: Adjust the ppl and cloog configure to work as
2371 	* configure: Re-generate.
2375 	* configure.ac: Add 'lto' to enable_languages, not
2377 	* configure: Regenerate.
2390 	* configure.ac (host_libs): Add lto-plugin.
2391 	* configure: Regenerate.
2399 	* configure.ac: Add --enable-lto.
2404 	* configure: Regenerate.
2408 	* configure.ac: If --with-system-zlib, suppress local zlib and
2409 	pass --with-system-zlib to subdir configure scripts.
2410 	* configure: Regenerate.
2424 	* configure.ac: Update minimum MPC version to 0.7.
2425 	* configure: Regenerate.
2429 	* configure.ac: Pass any --cache-file=/dev/null option on to
2431 	* configure: Regenerate.
2445 	* configure.ac: Error out if $srcdir isn't '.' but contains
2447 	* configure: Regenerate.
2451 	* configure.ac: If bootstrapping a combined tree with
2453 	* configure: Regenerate.
2455 	* configure.ac: Also add target_libs of stage1_languages to
2457 	* configure: Regenerate.
2459 	* configure.ac: Diagnose --enable-build-with-cxx bootstrap
2461 	* configure: Regenerate.
2465 	* configure.ac: Disable java and boehm-gc for bfin-*-*.
2466 	* configure: Regenerate.
2470 	* configure.ac: Do not use $extrasub for replacing @if/@endif
2474 	* configure: Regenerate.
2478 	* configure.ac (with-build-config): Document.  Handle without.
2480 	* configure: Rebuilt.
2484 	* configure.ac (--with-build-config): New.  Set BUILD_CONFIG.
2486 	* configure: Rebuilt.
2487 	* Makefile.tpl: Make BUILD_CONFIG configure-configurable.
2502 	* configure.ac: Detect awk and sed.
2506 	* configure: Regenerate.
2524 	* configure.ac (AC_PREREQ): Bump to 2.64.
2531 	* configure.ac: Do not substitute datarootdir, htmldir,
2534 	* configure: Regenerate.
2536 	* configure: Regenerate.
2547 	* configure.ac: Call AC_DISABLE_OPTION_CHECKING.
2549 	* configure: Regenerate.
2551 	* Makefile.def (configure-target-libiberty): Depend on
2553 	(configure-target-newlib): Likewise.
2562 	* configure.ac (sh*-*-elf): Don't add target-libgloss to noconfigdirs.
2563 	* configure: Regenerate.
2567 	* configure.ac: Add missing comma in AC_ARG_WITH(boot-libs).
2568 	* configure: Rebuild.
2573 	* configure.ac (comparestring): Create new variable.
2575 	* configure: Regenerate.
2580 	* configure.ac: Add --enable-build-with-cxx.  When set, add c++ to
2593 	* configure, Makefile.in: Rebuild.
2597 	* configure.ac: Detect MPC in default directory.
2598 	* configure: Regenerate.
2602 	* configure.ac (powerpc-*-aix*, rs6000-*-aix*): Add target-newlib
2604 	* configure: Regenerate.
2609 	* configure.ac: Likewise.  Reorganize GMP/MPFR checks.
2611 	* Makefile.in, configure: Regenerate.
2620 	* configure.ac (cygwin noconfigdirs):  Remove libgcj.
2621 	* configure:  Regenerate.
2625 	* configure.ac ($with_ppl):  Default to no if not supplied.
2627 	configure:  Regenerate.
2632 	* configure.ac (extra_mpfr_configure_flags): Set and AC_SUBST.
2635 	* configure, Makefile.in: Regenerate.
2639 	* configure.ac: Change copyright header to refer to version
2648 	* configure.ac: Restore match for darwin9 or later. Use double
2650 	* configure: Regenerate.
2662 	* configure.ac: Add Microblaze target.
2663 	* configure: Regenerate.
2667 	* configure.ac: Do not exclude gas for i386-*-darwin.
2669 	* configure: Regenerate.
2675 	* configure.ac (host_tools): Add cgen.
2676 	* configure: Regenerate.
2684 	* configure.ac: Define is_elf for QNX Neutrino targets.
2685 	* configure: Regenerate.
2705 	* configure.ac: Support gold for target arm*-*-*.
2706 	* configure: Regenerate.
2766 	(configure-stageid-prefixmodule): Pass TFLAGS, adjust FLAGS.
2793 	* configure.ac: Add moxie support.
2794 	* configure: Rebuilt.
2798 	* configure.ac: Bump minimum GMP/MPFR versions to 4.2 and 2.3.1.
2799 	* configure: Regenerate.
2804 	* configure.ac: Require texinfo 4.7.
2805 	* configure: Regenerated.
2820 	* configure: Rebuild.
2821 	* configure.ac (host_libs): Add libiconv.
2824 	(configure-gdb, all-gdb): Depend on libiconv.
2828 	* configure.ac: Treat gdb as supported on x86_64-darwin.
2829 	* configure: Regenerate.
2837 	* configure.ac (--with-host-libstdcxx): New option.
2838 	* configure: Regenerate.
2842 	* configure.ac: Recognize GNU/kOpenSolaris (*-*-kopensolaris*-gnu).
2843 	* configure: Regenerate.
2848 	* configure.ac (cloog-polylib): Removed.
2850 	* configure: Regenerated.
2875 	* Makefile.def (configure-opcodes): Depend on configure-libiberty.
2881 	* configure.ac (ia64*-*-*vms*): Add case with no gdb or ld support.
2882 	* configure: Regenerate.
2909 	* configure.ac (ppllibs): Add by default the lib flags.
2910 	* configure: Regenerate.
2914 	* configure.ac: Add double brackets on darwin[912].
2915 	* configure: Regenerate.
2919 	* configure.ac: Expand to darwin10 and later.
2920 	* configure: Regenerate.
2924 	* Makefile.def: configure-target-boehm-gc depends on
2938 	* config-ml.in: Remove 64bit configure tests.
2953 	* configure: Regenerate.
2955 	* configure.ac (host_libs): Add ppl and cloog.
2963 	* configure.ac: Always pass -DCLOOG_PPL_BACKEND to the
2965 	* configure: Re-generate.
2969 	* configure.ac (--with-cloog-polylib): New.
2972 	* configure: Re-generate.
2976 	* configure.ac: Initialize clooglibs to -lcloog.
2977 	* configure: Re-generate.
2981 	* configure.ac (MPFR check): Bump minimum version to 2.3.0 and
2984 	* configure: Regenerate.
2988 	* configure.ac (spu-*-*): Remove special case.
2989 	* configure: Regenerate.
2995 	* configure.ac (RPATH_ENVVAR): Use PATH on Windows.
2998 	* configure: Regenerate.
3003 	* configure.ac: Build gdb for i?86-*-darwin*
3004 	* configure: Regenerated.
3030 	(LDFLAGS_FOR_TARGET): Initialize from configure script.
3032 	* Makefile.in, configure: Regenerated.
3033 	* configure.ac: Set CPPFLAGS_FOR_TARGET, LDFLAGS_FOR_TARGET,
3038 	* configure.ac [spu-*-*]: Do not set skipdirs.
3039 	* configure: Re-generate.
3058 	(LDFLAGS_FOR_TARGET): Initialize from configure script.
3060 	* Makefile.in, configure: Regenerated.
3061 	* configure.ac: Set CPPFLAGS_FOR_TARGET, LDFLAGS_FOR_TARGET,
3076 	* configure.ac (RPATH_ENVVAR): Use PATH on Windows.
3079 	* configure: Regenerate.
3084 	* configure.ac (powerpc-*-darwin*, i?86-*-darwin*,x86_64-*-darwin9):
3086 	* configure: Regenerate.
3095 	* configure.ac (mips*-*-*linux*, mips*-*-gnu*): Use mt-mips-gnu.
3096 	* configure: Regenerate.
3103 	* configure.ac: Add makefile fragments for hpux.
3106 	* configure: Regenerate.
3111 	* Makefile.tpl ($(srcdir)/configure): Update dependencies.
3113 	* configure: Regenerate.
3123 	* configure: Regenerate.
3127 	* configure.ac: Set TOPLEVEL_CONFIGURE_ARGUMENTS early, when
3129 	* configure: Regenerate.
3138 	* configure.ac (arm*-*-linux-gnueabi): Don't disable building
3140 	* configure: Regenerate.
3145 	* configure.ac: Add powerpc*-*-* to gold supported targets.
3146 	* configure: Regenerate.
3173 	* configure.ac: Include override.m4.
3174 	* configure: Regenerate.
3183 	* configure.ac: Do not build libssp for the AVR.
3184 	* configure: Regenerate.
3188 	* MAINTAINERS: Replace reference to configure.in with reference to
3189 	configure.ac.
3193 	* configure.ac (cr16-*-*): Add case for cr16 target and include gdb
3195 	* configure: Regenerate.
3199 	* configure.ac: Add sparc*-*-* to gold supported targets.
3200 	* configure: Regenerate.
3219 	* configure.ac: Run ACX_CHECK_CYGWIN_CAT_WORKS for cygwin hosted
3221 	* configure: Regenerate.
3226 	* configure.ac: Combine rules for mingw32 and mingw64.
3227 	* configure: Regenerate.
3236 	* configure.ac: Add support for --enable-gold.
3238 	* configure, Makefile.in: Regenerate.
3271 	* configure.ac: m4_include config/proginstall.m4.
3272 	* configure: Regenerate.
3315 	* configure.ac (CFLAGS_FOR_TARGET, CXXFLAGS_FOR_TARGET): Compute here.
3316 	* configure: Regenerate.
3325 	(configure-stage[+id+]-[+prefix+][+module+]): Pass stage_libcflags
3349 	* configure.ac: Enable fortran for cris-*-elf and crisv32-*-elf.
3350 	* configure: Regenerate.
3354 	* configure.ac (xtensa*-*-*): Recognize processor variants.
3355 	* configure: Regenerate.
3360 	* configure.ac (PARSE_ARGS): Push suitable setting of
3361 	ac_subdirs_all, for `./configure --help=recursive'.
3363 	* configure: Regenerate.
3383 	* configure.ac: Change required MPFR from 2.2.0 -> 2.2.1.
3385 	* configure: Regenerate.
3395 	* configure.ac: Enable libjava for x86_64-*-darwin9.
3396 	* configure: Regenerate.
3412 	* Makefile.def (dependencies): Make configure-gdb depend on
3435 	* configure.ac (CFLAGS_FOR_BUILD, CXXFLAGS_FOR_BUILD,
3439 	* configure: Regenerate.
3447 	* configure.ac: Default them to host tools for $host = $build.
3450 	* configure: Regenerate.
3455 	* configure.ac (mipsisa*-*-elfoabi*): New stanza.
3456 	* configure: Regenerate.
3460 	* configure.ac (TOPLEVEL_CONFIGURE_ARGUMENTS): Move libgomp before
3463 	* configure: Regenerate.
3468 	* configure.ac: Raise minimum makeinfo version to 4.6.
3469 	* configure: Regenerate.
3473 	* configure.ac: Correct makeinfo version check.
3474 	* configure: Regenerate.
3478 	* configure.ac (mips*-sde-elf*): New stanza.  Add target-libiberty
3481 	* configure: Regnerate.
3485 	* configure.ac: Remove mips64*-*-linux* noconfigdirs section, thus
3487 	* configure: Regenerate.
3491 	* configure.ac (--enable-stage1-checking): If neither --enable-checking
3494 	* configure: Re-generate.
3499 	* configure.ac: Use config/mh-mingw on mingw.
3500 	* configure: Regenerate.
3505 	* configure.ac: For libgloss targets, point the linker to the linker
3507 	* configure: Regenerate.
3511 	* configure.ac (noconfigdirs): Remove target-libffi and
3520 	* configure.ac: Add types checking to stage1 checking flags.
3521 	* configure: Regenerate.
3529 	* configure.ac (--with-debug-prefix-map): New.
3530 	* configure: Regenerate.
3535 	* configure.ac (mips*-sde-elf*): New stanza.  Use config/mt-sde
3537 	* configure: Regenerate.
3560 	* configure.ac (TOPLEVEL_CONFIGURE_ARGUMENTS, baseargs): Pass
3562 	* configure: Regenerate.
3577 	* configure.ac: Fix my previous change to really match GCC.
3578 	* configure: Regenerate.
3582 	* configure.ac: Rewrite 'configure --help' strings to look nicer.
3583 	* configure: Regenerate.
3587 	* configure.ac: Add some missing m4 quotation.
3588 	* configure: Regenerate.
3594 	* configure.ac: Likewise.
3596 	* configure: Regenerate.
3604 	* configure.ac: Don't add target-libmudflap to noconfigdirs for
3606 	* configure: Regenerate.
3610 	* configure.ac (arm*-*-linux-gnueabi): Don't build libgloss if we're
3612 	* configure: Regenerated.
3620 	* Makefile.def: Add dependency from configure-gdb to all-bfd.
3644 	* configure.ac: Don't use -fkeep-inline-functions for GCC < 3.3.1.
3645 	* configure: Rebuilt.
3679 	(configure-stage[+id+]-[+prefix+][+module+],
3694 	* configure.ac (TOPLEVEL_CONFIGURE_ARGUMENTS): Fix m4 quoting
3696 	* configure: Regenerate.
3705 	* configure: Regenerate.
3709 	* configure.ac: Add "--with-pdfdir" configure option,
3717 	* configure: Regenerate
3732 	* configure: Regenerate.
3733 	* configure.ac: Move statements after variable declarations.
3737 	* configure.ac: Adjust for loop syntax.
3738 	* configure: Regenerate.
3742 	* configure: Rebuilt.
3746 	* configure.ac: Drop multiple occurrences of --enable-languages,
3748 	* configure: Rebuilt.
3755 	* configure.ac (TOPLEVEL_CONFIGURE_ARGUMENTS): Fix quoting.
3756 	* configure: Regenerate.
3760 	* configure.ac (target_libraries): Move libgcc before libiberty.
3761 	* configure: Regenerated.
3765 	* configure: Regenerate again?
3769 	* configure: Reapply PR30748 fix which was lost in the previous commit.
3775 	* configure.ac: Remove obsolete build / host tests.  Use AC_PROG_CC
3777 	* configure: Regenerated.
3781 	* configure: Regenerate.
3786 	* configure.ac: Correct syntax for Solaris ksh.
3787 	* configure: Regenerated.
3794 	* configure: Regenerate.
3800 	* configure.in: Rename to...
3801 	* configure.ac: ...this.  Update AC_PREREQ.  Prevent error for
3803 	target_noncanonical.  Use them.  Rewrite removal of configure
3808 	* configure: Regenerated with autoconf 2.59.
3810 	* src-release (DEVO_SUPPORT, do-proto-toplev): Expect configure.ac.
3823 	* configure.in: Fix typo for mep's target_makefile_frag.
3824 	* configure: Regenerated.
3828 	* configure.in (mep*): Add -mlibrary to FLAGS_FOR_TARGET.
3829 	* configure: Regenerate.
3833 	* configure.in (target_makefile_frag): use mt-mep
3837 	* configure.in: Remove gdb from MeP skip list.
3841 	* configure.in (noconfigdirs): Remove gcc from MeP skip list.
3845 	* configure.in (noconfigdirs): Add gcc and gdb for MeP.
3858 	* configure.in: Change == to = in test command.
3859 	* configure: Regenerate.
3865 	* configure.in (build_configargs, host_configargs, target_configargs):
3873 	(configure): Add host_alias/target_alias arguments.  Adjust invocations.
3874 	* configure: Regenerate.
3879 	* configure.in: Try to link to functions only in mpfr 2.2.x
3880 	to improve robustness of configure tests.
3881 	* configure: Regenerate.
3885 	* configure.in: Add support for an x86_64-mingw* target.
3886 	* configure: Regenerate.
3892 	* configure.in: Omit libiberty if building only target libgcc.
3893 	* configure, Makefile.in: Regenerated.
3897 	* configure.in: Use DEV-PHASE to detect the default for --enable-werror.
3898 	* configure: Regenerate.
3905 	(configure-target-[+module+]): Emit --disable-bootstrap dependencies
3908 	* configure.in (target_libraries): Add target-libgcc.
3909 	* Makefile.in, configure: Regenerated.
3916 	* configure.in: Reorganize recognition of languages.  Add
3919 	* configure: Regenerate.
3928 	* configure.in: Warn that MPFR 2.2.0 is buggy.
3929 	* configure: Regenerate.
3933 	* configure.in: When removing Makefiles to force a reconfigure, also
3935 	* configure: Regenerate.
3947 	* configure.in: Remove "$build" case for powerpc-*-darwin* since
3949 	* configure: Regenerate.
3956 	(bootstrap_stage): Add STAGE1_CHECKING to stage1 configure flags,
3960 	* configure.in: Add --enable-stage1-checking.
3961 	* configure: Regenerate.
3966 	* configure.in: Update error message for missing GMP/MPFR.
3968 	* configure: Regenerate.
3972 	* configure.in: Update MPFR version in error message.
3974 	* configure: Regenerate.
3978 	* configure.in (--with-mpfr-dir, --with-gmp-dir): Remove flags.
3982 	* configure: Regenerate.
3987 	* configure.in: Correct x86 darwin support for libjava to powerpc
3989 	* configure: Regenerate.
3993 	* configure.in:  Handle spu makefile frag.
3996 	* configure: Regenerate.
4005 	* configure.in: Sync with GCC (spu-*-*).
4006 	* configure: Sync with GCC.
4028 	* configure.in: Sync with GCC (mpfr, gmp).
4029 	* configure: Sync with GCC.
4033 	* configure.in: Remove target-libgloss from noconfigdirs for
4035 	* configure: Regenerated.
4055 	* configure.in (RUNTEST): Look for 'runtest' in the source tree by using
4057 	* configure: Regenerated.
4065 	* configure.in: Remove redundant handling of mips*-dec-bsd*. Likewise
4067 	* configure: Regenerate.
4071 	* configure.in: Never build newlib for a Mingw host.
4077 	* configure: Regenerate.
4091 	* configure.in: Add -fkeep-inline-functions to CFLAGS for stage 1
4093 	* configure: Regenerate.
4097 	* configure.in: Allow mingw32 and cygwin targets to build cross-gdb.
4098 	* configure: Regenerated.
4102 	* Makefile.tpl (configure-stageN-MODULE): Pass --with-build-libsubdir
4107 	* Makefile.def: Add dependencies for configure-opcodes
4108 	on configure-intl and all-opcodes on all-intl.
4117 	* configure.in: Fix thinkos in previous check-in.
4118 	* configure: Regenerate.
4127 	* configure.in: Test subdir_requires and give an appropriate
4129 	* configure: Regenerate.
4134 	* configure.in: Only enable libgomp on IRIX 6.
4135 	* configure: Regenerate.
4140 	* configure.in: Add target-boehm-gc to noconfigdirs depending on
4143 	* configure: Regenerate.
4161 	* configure.in: Don't enable libgomp on hpux10.
4162 	* configure: Rebuilt.
4172 	* configure.in:	Remove target-boehm-gc from noconfigdirs where
4174 	* configure: Regenerate.
4195 	* configure.in: Add --enable-objc-gc at toplevel and have it
4203 	* configure: Regenerate.
4208 	* Makefile.tpl (configure-[+prefix+][+module+],
4217 	* configure.in:  Enable libgcj for hppa*-hp-hpux11*.
4218 	* configure: Rebuilt.
4225 	* configure.in (target_libraries): Add libgcc-math target library.
4226 	(--enable-libgcc-math): New configure switch.
4228 	* configure: Re-generate.
4238 	added configure dependencies to everything with an all dependency
4258 	* configure.in: Enable gprof for cross builds.
4259 	* configure: Regenerate.
4280 	* configure.in: Restore CFLAGS if GMP isn't present.
4281 	* configure: Regenerate.
4285 	* configure.in (m32c): Build libstdc++-v3.  Pass flags to
4288 	* configure: Regenerate.
4299 	* configure.in: Add --with-datarootdir, --with-docdir,
4301 	* configure: Regenerate.
4306 	* configure.in: Require makeinfo 4.4 or higher.
4307 	* configure: Regenerate.
4318 	* configure.in: Handle --disable-<component> generically.
4319 	* configure: Regenerate.
4325 	* configure.in: Remove AC_SUBST(target_configdirs).
4326 	* Makefile.in, configure: Regenerated.
4344 	* configure.in: (BUILD_PREFIX, BUILD_PREFIX_1): Don't substitute.
4349 	* Makefile.tpl (configure-stage[+id+]-[+prefix+][+module+],
4354 	(configure-[+prefix+][+module+], all-[+prefix+][+module+]): For
4364 	* configure: Regenerate.
4374 	* configure.in (target_libraries): Add libgcc-math target library.
4375 	(--enable-libgcc-math): New configure switch.
4377 	* configure: Re-generate.
4387 	* configure.in (target_libraries): Add target-libgomp.
4388 	* configure: Regenerate.
4393 	* configure: Regenerate.
4397 	* configure.in: Set with_gnu_as, with_gnu_ld, with_newlib earlier.
4400 	* configure: Regenerate.
4428 	* configure.in: Do not try to use symbolic links between directories.
4436 	configure substitution.
4439 	* configure.in: Remove lean bootstrap support from here.
4442 	* configure: Regenerate.
4446 	* configure.in: When reconfiguring remove Makefile in
4448 	* configure: Regenerate.
4452 	* configure.in: Add support for RDOS target.
4453 	* configure: Regenerate.
4468 	* configure.in: Do not include mt-ppc-aix target fragment.
4469 	* configure: Regenerate.
4473 	* configure.in: Select appropriate fragments for PowerPC/AIX.
4474 	* configure: Regenerate.
4498 	* configure.in: Flip the top-level bootstrap switch.
4499 	* configure: Regenerate.
4511 	(configure-[+prefix+][+module+]): Instead of [+deps+], handle
4513 	(configure-stage[+id+]-[+prefix+][+module+]): Likewise.
4524 	* configure.in: Replace ms1 arch with mt.
4525 	* configure: Rebuilt.
4534 	* configure.in: Replace ms1 arch with mt.
4535 	* configure: Rebuilt.
4543 	* configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4,
4576 	* configure.in (host_libs): Include libdecnumber.
4578 	* configure: Likewise.
4588 	(configure-gdb, install-gdb): New rules.
4589 	* configure.in: Set CONFIGURE_GDB_TK and INSTALL_GDB_TK.
4590 	* Makefile.in, configure: Regenerated.
4608 	* configure.in (bfin-*-*): Use test, not brackets, in if statement.
4609 	* configure: Regenerate.
4613 	* configure.in (arm-*-linux-gnueabi): Add to noconfigdirs
4616 	* configure: Regenerate.
4625 	* configure.in: Check for $OBJDUMP_FOR_TARGET.
4626 	* configure, Makefile.in: Regenerated.
4637 	* configure.in (default_target): Remove.
4643 	(bootstrap configure & all targets): Do not use stage*-start
4645 	(non-bootstrap configure & all targets): Prepend a $(unstage).
4651 	* configure: Regenerate.
4661 	* configure.in (bfin-*-*): Support bfin.
4662 	* configure: Regenerated.
4666 	* configure.in (*-*-darwin*): Build bfd, binutils and opcodes.
4667 	* configure: Regenerated.
4680 	* configure.in: Set LIPO_FOR_TARGET, STRIP_FOR_TARGET,
4683 	* configure: Regenerate.
4687 	* configure.in (powerpc-*-aix*): Add target-libssp to noconfigdirs.
4689 	* configure: Regenerate.
4693 	* configure.in: Recognize f95 in the --enable-languages option,
4695 	* configure: Regenerate.
4707 	* configure.in (*-*-vxworks*):  Add target-libstdc++-v3 to noconfigdirs.
4708 	* configure:  Regenerated.
4722 	* configure.in: Replace NCN_STRICT_CHECK_TOOL with
4725 	* configure: Regenerate.
4729 	* configure.in (CC_FOR_TARGET, CXX_FOR_TARGET, GCJ_FOR_TARGET,
4745 	* configure: Regenerate.
4760 	* configure.in (--with-build-sysroot): New option.
4761 	* configure: Regenerated.
4774 	* configure.in: Add cases for Renesas m32c.
4775 	* configure: Regenerated.
4785 	* configure.in: Add toplevel noconfigdir support for tpf.
4786 	* configure: Regenerate.
4791 	* configure.in (target_libraries): Add target-libssp.
4792 	* configure: Rebuilt.
4811 	* configure.in: Add --enable-libssp and --disable-libssp.
4812 	* configure: Regenerate with autoconf-2.13.
4816 	* configure.in: Don't build sim or rda when targetting darwin.
4817 	* configure: Regenerate.
4849 	* configure.in (unsupported_languages): New macro.
4856 	* configure: Regenerate.
4860 	* configure.in: Fix typo in handling of --with-mpfr-dir.
4861 	* configure: Regenerate.
4872 	* configure.in: Set noconfigdirs for ms1.
4874 	* configure: Regenerate.
4885 	* Makefile.def (configure-gcc): Depend on binutils having been built.
4891 	* configure.in: Rewrite misleading error message when requested
4893 	* configure: Regenerate.
4901 	* configure.in: Always pass --target to target configures as
4903 	* configure: Rebuilt.
4909 	(configure, all): Add bootstrap support.
4924 	* configure.in <crisv32-*-*, cris-*-*>: New local variable
4928 	* configure: Regenerate.
4934 	(configure, all): New macros.  Use them throughout.
4944 	* configure.in: Don't use it.
4945 	* configure: Regenerate.
4956 	* configure.in (set_lib_path, SET_LIB_PATH, SET_GCC_LIB_PATH): Remove.
4958 	* configure: Regenerate.
4962 	* configure.in (RPATH_ENVVAR): Set to DYLD_LIBRARY_PATH on Darwin.
4963 	* configure: Regenerate.
4972 	* configure.in: Do not reference config/gcc-version.m4 nor
4975 	* configure: Regenerate.
5011 	always configure out-of-srcdir.
5013 	* configure.in (FLAGS_FOR_TARGET, CC_FOR_TARGET, GCJ_FOR_TARGET,
5018 	* configure: Regenerate.
5025 	* configure.in: Include gnattools in host_tools; disable it if ada
5027 	* configure: Regenerate.
5031 	* configure: Regenerate.
5035 	* configure.in: Allow darwin targeted ports to build tk, itcl and
5041 	* configure.in (noconfigdirs) <sparc-*-solaris2.[0-6]>: Add libgcj.
5042 	* configure: Regenerate.
5055 	* configure.in (noconfigdirs) <crisv32-*-*>: Match like cris-*-*.
5058 	* configure: Regenerate.
5090 	* Makefile.tpl (configure-build-[+module+],
5091 	configure-target-[+module+]): Always build symlink tree
5102 	* configure.in (sh64-*-*): Reenable gprof.
5103 	* configure: Regenerate.
5124 	* configure.in: Include config/gxx-include-dir.m4.  Use
5126 	* configure: Regenerate.
5131 	* configure.in: Set libstdcxx_incdir directly.
5132 	* configure: Regenerate.
5144 	* configure.in: Clear gcc_version_trigger if the file doesn't exist.
5145 	* configure: Regenerate.
5149 	* configure.in: Include config/gcc-version.m4.  Use TL_AC_GCC_VERSION
5151 	* configure: Regenerate.
5155 	* configure.in (hppa*-*-linux*): Don't add libgcj to noconfigdirs.
5157 	* configure: Rebuilt.
5176 	* configure.in: Remove all instances of build-fixincludes from
5179 	* configure: Regenerate.
5186 	* configure.in (noconfigdirs) [mmix-*-*]: Disable
5188 	* configure: Regenerate.
5203 	* configure.in: Set up LD_LIBRARY_PATH by default for gcc.
5204 	* configure: Regenerated.
5208 	* configure.in (arm-*-oabi*, thumb-*-oabi*): Remove.
5209 	* configure: Regenerated.
5214 	* configure.in (case ${target}): Do not build fixincludes for avr.
5215 	* configure: Regenerated.
5219 	* configure.in (case ${target}): Do not build fixincludes
5221 	* configure: Regenerated.
5225 	* configure.in: Use an absolute path to install-sh.
5226 	* configure: Regenerated.
5239 	* configure.in (*-*-cygwin*): Supress warning if newlib not present.
5240 	* configure: Regenerate.
5263 	* configure.in: Enable target-libgloss for crx-*-*.
5264 	* configure: Regenerate.
5268 	* configure.in (--without-headers): Add missing double quotes.
5269 	* configure: Regenerate.
5284 	* configure.in (SET_GCC_LIB_PATH): Set and substitute.
5285 	* configure: Regenerated.
5296 	* configure.in: Use it to speed up bootstrap on some IA-32 hosts.
5297 	* configure: Regenerate.
5302 	* configure.in (*-*-darwin*): Renable libobjc.
5303 	* configure: Regenerate.
5309 	* configure.in: Ditto.
5311 	* configure: Ditto.
5410 	* configure.in: Remove target-libstdc++-v3 from noconfigdirs for
5414 	* configure: Likewise.
5433 	* configure.in: add test for powerpc-*-darwin* to specify makefile frag
5434 	* configure: regenerate
5442 	* configure.in: Fix indentation.
5443 	* configure: Regenerate.
5449 	* configure.in (build_tools): Add fixincludes.
5452 	* configure: Regenerate.
5457 	* Makefile.tpl (configure-stageN-*, all-stageN-*): Turned into
5465 	* configure.in: Only warn when bootstrapping but
5467 	* configure: Regenerate.
5472 	* configure.in:  Give a better error message if GMP/MPFR are missing
5474 	* configure:  Regenerated.
5478 	* configure.in:  Print a list of available language front-ends if
5480 	* configure:  Regenerated.
5485 	* configure: Regenerate.
5489 	* Makefile.tpl (configure-[+module+], all-[+module+]): Exit
5510 	* configure.in (build_configdirs): Always enable build_tools.
5521 	* configure.in: In noconfigdirs check, match GNU/k*BSD with GNU/Linux
5523 	* configure: Regenerate.
5527 	* Makefile.def, configure.in, src-release: Remove useless, bogus
5529 	* Makefile.in, configure: Regenerate.
5538 	* configure.in (arm*-*-eabi*): New target.
5539 	* configure: Regenerate.
5543 	* configure.in: Turn mt-linux into mt-gnu. Use mt-gnu and enable
5545 	* configure: Regenerate.
5553 	(configure-target-[+module+]): Depend on maybe-all-gcc
5560 	* configure.in (arm*-*-symbianelf*): Add ${libgcj} and
5565 	* configure.in: Check for MPFR as well as GMP.
5566 	* configure: Regenerate.
5573 	(configure-host, all-host, [+make_target+]-host, do-check,
5577 	(maybe-configure-gcc, configure-gcc, maybe-all-gcc, all-gcc,
5603 	* configure.in: Add noconfigdirs for crx-*-*.
5604 	* configure: Regenerate.
5612 	* configure.in: Build libmudflap by default on FreeBSD.
5613 	* configure: Regenerated.
5617 	* configure.in: Do not build libmudflap by default on non-GNU/Linux
5619 	* configure: Regenerated.
5630 	* configure.in:  Do not prepend $srcdir to /dev/null in
5632 	* configure:  Regenerate.
5657 	* configure.in: Better support for multiple build modules,
5662 	* configure: Regenerate.
5671 	* Makefile.tpl (configure-build-[+module+],
5672 	configure-[+module+], configure-target-[+module+]): Pass
5681 	(configure-gcc, all-gcc, GCC_STRAP_TARGETS, profiledbootstrap,
5689 	* configure.in: Check for srcdir/winsup rather than build directory
5691 	* configure: Regenerate.
5695 	* configure.in: Don't build Cygwin native newlib if winsup
5697 	* configure: Regenerate.
5719 	* configure.in: Call ACX_PROG_LN.
5720 	* configure: Regenerate.
5724 	* configure.in: Fix --enable-bootstrap breakage introduced in trees
5726 	* configure: Regenerate.
5735 	* configure.in: Remove new- prefix from toplevel
5737 	* configure: Regenerate.
5753 	target from configure.
5754 	(all-gcc, configure-gcc): Use conditionals to
5758 	* configure.in: Support --enable-bootstrap.
5771 	* configure: Regenerate.
5775 	* configure.in: Fix sed invocation for GFORTRAN_FOR_TARGET.
5776 	* configure: Regenerate.
5788 	* configure.in: Test the ability to symlink directories.
5789 	* configure: Regenerate.
5792 	* Makefile.tpl (configure-stage1-gcc,
5793 	configure-stage2-gcc, configure-stage3-gcc,
5812 	(configure-stage1-gcc): ...to here.
5816 	(configure-stage1-gcc, configure-stage2-gcc,
5817 	configure-stage3-gcc, all-stage1-gcc,
5826 	* configure.in: Add libcpp host module.
5827 	* configure: Regenerate.
5831 	* Makefile.def, Makefile.tpl, configure.in: Remove all mention
5833 	* configure, Makefile.in: Regenerate.
5845 	(configure-build*): Export GFORTRAN.
5846 	(configure-gcc): Export GMPLIBS and GMPINC.
5848 	(configure-target-libgfortran): Define.
5850 	* configure.in (host_libs): Add libbanshee.
5856 	* configure: Regenerate.
5863 	* configure: Regenerate.
5891 	* configure.in: Invoke ACX_PROG_CMP_IGNORE_INITIAL.
5892 	* configure: Regenerate.
5907 	* configure.in (mips*-*-irix5*): Enable ld.
5908 	* configure: Regenerate.
5912 	* Makefile.tpl (configure-[+module+], configure-gcc,
5913 	configure-stage1-gcc, configure-stage2-gcc, configure-stage3-gcc):
5921 	use the ones found by configure rather than hacking around with
5923 	* configure.in: Give Makefile.tpl the information necessary
5926 	* configure: Regenerate.
5931 	* configure.in: When computing baseargs, strip *all* copies of
5935 	* configure: Regenerate.
5939 	* configure.in (powerpc-*-aix*): Remove target-libada from noconfigdirs.
5941 	* configure: Regenerate.
5946 	* mpw-README, mpw-build.in, mpw-config.in, mpw-configure,
5957 	* configure.in (top level bootstrap support): Rework --enable-werror
5959 	* configure: Regenerate.
5961 	@stage2_werror_flag@ down to configure in stages 2 and 3.
5966 	* Makefile.tpl (new-bootstrap): Set CC and CC_FOR_BUILD in configure
5968 	OUTPUT_OPTION (now detected by configure) from the flags passed down
5980 	of coverage flags from 'make' to 'configure'; improve comments.
5984 	language setting from all- target to configure- target; disable
5988 	* configure.in: Comma-separate stage 1 language list for top
5990 	* configure: Regenerate.
5994 	prev-gcc in configure- targets as well as all- targets.
5999 	* configure.in: Remove symbolic link section.
6000 	* configure: Regenerate.
6007 	* configure.in (DEFAULT_YACC, DEFAULT_M4, DEFAULT_LEX):
6009 	* configure.in: Fix comment typo from last patch.
6010 	* configure: Regenerate.
6016 	* configure.in: Introduce support for top level bootstrap.
6017 	* configure: Regenerate.
6023 	* configure.in: Cope with shells that do not support unquoted ^
6024 	* configure: Regenerate.
6030 	* configure.in: Cope with shell that do not support nesting
6032 	* configure: Regenerate.
6037 	* configure.in: Fix escaping of $.
6038 	* configure: Regenerate.
6042 	* configure: Regenerate.
6048 	* configure.in: Find default values for the tools as
6055 	* configure.in (mips64*-*-linux*): Override mips*-*-linux* case
6057 	* configure: Regenerated.
6063 	* Makefile.tpl: Add dependency for configure-target-libada.
6089 	* configure.in (powerpc-*-aix*): Add target-libada to noconfigdirs.
6091 	* configure: Regenerate.
6095 	* configure.in (host): Add in missing $noconfigdirs to defines.
6096 	* configure: Regenerate.
6103 	* configure.in, Makefile.tpl, Makefile.def: Add target-libada,
6104 	with appropriate dependencies. Add --enable-libada configure switch.
6105 	* configure, Makefile.in: Regenerate.
6109 	* configure.in: Don't pass --with-stabs on IRIX 5 either.
6110 	* configure: Regenerate.
6136 	* Makefile.tpl (configure-target-[+module+]): Support stage.
6146 	* configure.in: Use ./config.cache, not config.cache.
6147 	* configure: Regenerate.
6151 	* configure.in: Don't share a cache file for host dirs.
6152 	* configure: Regenerate.
6164 	* configure.in: Don't use shared config.cache for target
6166 	* configure: Regenerate.
6170 	* configure.in (ia64*-*-hpux*): Disable building java libraries.
6171 	* configure: Regenerated.
6175 	* configure.in (*-*-uclinux): Exclude newlib, libgloss and rda.
6176 	* configure: Regenerated.
6183 	(configure-build-[+module+], configure-[+module+]): Likewise.
6184 	(configure-target-[+module+], configure-gcc, config.status): Likewise.
6189 	* configure.in (raw_libstdcxx_flags): Remove the leading space.
6190 	* configure: Regenerate.
6204 	* configure.in (*-*-vxworks):  Add target-libiberty to noconfdirs.
6205 	* configure:  Regenerate.
6215 	* configure.in: Allow explicit specification of CFLAGS_FOR_BUILD.
6216 	* configure: Rebuilt
6217 	* Makefile.tpl: Use CFLAGS_FOR_BUILD computed by configure
6236 	* configure.in: Pass a computed --program-transform-name
6238 	* configure: Regenerated.
6250 	* configure.in (TOPLEVEL_CONFIGURE_ARGUMENTS, baseargs): Fix
6252 	* configure: Regenerated.
6269 	* configure: Regenerate.
6273 	* configure.in: Match GNU/KFreeBSD with new kfreebsd*-gnu triplet.
6277 	* configure.in: Ensure arguments to sed are properly spaced.
6278 	* configure: Regenerate.
6290 	* configure.in: Set RAW_CXX_FOR_TARGET if unset.
6291 	* configure: Regenerated.
6295 	* configure.in:  Use newline instead of semicolon when assuming
6297 	* configure:  Regenerated.
6302 	* configure.in: When testing with_libs and with_headers, treat
6304 	* configure: Regenerate.
6306 	* configure.in (TOPLEVEL_CONFIGURE_ARGUMENTS): Quote properly for
6309 	* configure: Regenerate.
6313 	* configure.in: Disable libgcj for darwin not on powerpc.
6314 	* configure: Rebuild.
6341 	* configure.in (noconfigdirs): Do not add GDB when m32r-*-*.
6342 	* configure: Ditto.
6346 	* configure.in: Enable libgcj for darwin.
6347 	* configure: Rebuild.
6358 	* configure.in: Don't build dirs explicitly here.
6359 	* configure: Rebuild.
6378 	* configure.in: Use AC_PROG_INSTALL.
6380 	* configure: Regenerate.
6384 	* configure: Rebuilt.
6386 	* configure.in (noconfigdirs) [am33_2.0-*-linux*]: Don't build
6389 	* configure.in (am33_2.0-*-linux*): Added.
6393 	* configure.in: Add ${libgcj} to noconfigdirs for xtensa-*-* targets.
6394 	* configure: Regenerate.
6404 	* configure.in: Clean up config-lang.in handling.  Delete
6406 	* configure: Regenerate.
6410 	* configure.in: Rename 'target_libs' to 'target_libraries'.
6412 	* configure: Regenerate.
6416 	* Makefile.tpl: Add maybe-configure-itcl to configure-gdb.
6427 	* configure.in (noconfigdirs) <cris-*-*>: Disable target-newlib
6431 	* configure: Regenerate.
6435 	* configure.in: Update testsuite_flags to new location.
6436 	* configure. Regenerate.
6459 	* configure.in: Don't pass --with-stabs for mips*-sgi-irix6*o32.
6460 	* configure. Regenerate.
6464 	* configure.in: Disable serial configure by default.
6465 	* configure: Regenerate.
6490 	* configure.in: Add 'recursive targets' to maybe list.
6491 	* configure: Regenerate.
6522 	* Makefile.tpl (configure-target-libiberty): Depend only on gcc, not
6533 	* configure.in: Use curly braces in the definition of tooldir.
6534 	* configure: Regenerate.
6538 	* configure.in: Switch more things to use maybe dependencies.
6541 	* configure: Regenerate.
6546 	* configure.in: Accept i[3456789]86 for machine type.
6547 	* configure: Regenerate.
6551 	* configure.in: Switch more things to use maybe dependencies.
6553 	* configure: Regenerate.
6569 	* configure.in: Correct sed script so that options in quotes are not
6571 	* configure: Rebuild.
6575 	* configure.in (FLAGS_FOR_TARGET): Remove $$s/newlib/libc/sys/cygwin
6577 	* configure: Ditto.
6605 	* configure.in (powerpc64*-*-linux*): Remove.
6606 	* configure: Rebuilt.
6617 	* configure.in (arm-*-netbsdelf*): Enable building java libraries.
6618 	* configure: Regenerated.
6623 	* */configure: Rebuilt.
6639 	* configure.in: Clean up gxx_include_dir logic.
6640 	* configure: Regenerate.
6644 	* configure.in (gxx_include_dir): Fix typo.
6645 	* configure: Regenerated.
6653 	* configure.in: Include $(build_tooldir)/sys-include in
6655 	* configure: Regenerated.
6661 	* configure.in: Reindent.  Don't set unused variables.
6662 	* configure: Regenerate.
6669 	* configure.in: Remove unused logic relating to --enable-shared
6672 	* configure: Regenerate.
6674 	* configure.in: Replace ${libstdcxx_version} by its value.
6676 	* configure: Regenerate.
6685 	* configure: Remove site-file supprot - it is obsolete.
6689 	* configure.in: Add support for kaOS as cross build target system.
6690 	* configure: Regenerated.
6695 	configure-target-* as some target builds may require additional
6714 	* configure.in: Introduce --enable-maintainer-mode.
6715 	* configure: Rebuilt.
6716 	* Makefile.tpl (Makefile.in, configure): Enable dependencies only
6722 	* configure: Regenerate using autoconf 2.13.
6735 	* configure: Regenerate using autoconf 000227.
6739 	* configure.in (*-*-darwin*): Rename from powerpc*-*-darwin*,
6740 	don't configure target-libobjc.
6741 	* configure: Regenerate.
6753 	* configure.in: Remove all traces of snavigator, db, and grep.
6754 	* configure: Regenerated.
6767 	* configure.in:  Revert 24Jan change.
6768 	* configure:  Regenerate.
6772 	* configure.in: Revert previous change.
6773 	* configure: Regenerate.
6777 	* configure.in: Make rda native-only.
6778 	* configure: Regenerate.
6782 	* configure.in: Add missing \.
6783 	* configure: Rebuilt.
6787 	* configure.in (baseargs): Avoid using \| in sed regular
6789 	* configure: Rebuilt.
6793 	* configure.in (baseargs): Remove all supported forms of
6796 	* configure: Rebuilt.
6800 	* configure.in (noconfigdirs): Don't skip gas on IRIX 6.
6801 	* configure: Rebuilt.
6805 	* configure.in: Substitute TOPLEVEL_CONFIGURE_ARGUMENTS.
6808 	* configure: Regenerate.
6818 	* configure.in: Remove Makefile in build, host and target modules
6819 	unless configure was run with --no-recursion.
6820 	* configure: Rebuilt.
6829 	* configure: Regenerate with proper autoconf 2.13.
6833 	* configure.in: Add AC_PREREQ for consistency.
6834 	* configure: Regenerate.
6838 	* configure.in (GDB_TK): Add tcl directories conditional on
6840 	* configure: Regenerate.
6844 	* configure.in (LD): Improve test for gcc.  Try to set LD to the ld used
6846 	* configure: Rebuilt.
6859 	* configure.in: Fix use of $program_transform_name.
6860 	* configure: Regenerated.
6864 	* configure.in (baseargs): Don't remove first configure argument.
6865 	* configure: Regenerated.
6874 	(configure-build-[+module+], configure-[+module+],
6875 	configure-target-[+module+], configure-gcc): ... these.  Test
6878 	* configure.in: Move gcc-version-trigger to the end of
6880 	serdep.tmp.  Introduce --disable-serial-configure.  Remove
6883 	* configure: Rebuilt.
6887 	* configure.in (host_configargs): Replace reference to
6889 	* configure: Rebuilt.
6900 	(configure): Add $(srcdir).  Depend on config/acx.m4.  Use
6910 	* configure.in: Remove unnecessary PATH setting.
6911 	* configure: Regnerate.
6913 	* configure.in: Don't default to unprefixed tools unless
6915 	* configure: Regenerate.
6917 	* configure.in: Convert to autoconf script.  Blow away lots
6919 	* configure: Generate using Autoconf.
6925 	* configure: Remove unneeded 'export's.  Make CC_FOR_TARGET,
6926 	CXX_FOR_TARGET, GCJ_FOR_TARGET substituted in configure.in only.
6941 	* configure.in: Remove unnecessary leftovers.
6945 	* configure.in (extra_ranlibflags_for_target): New variable.
6947 	* configure (tooldir): Handle extra_ranlibflags_for_target.
6958 	* configure.in: Put build_prefix before $(BUILD_SUBDIR) here, and
6963 	* Makefile.tpl, configure.in: Substitute libstdcxx_incdir.
6971 	* configure.in (build_prefix): New. Substitute.
6989 	* configure.in (noconfigdirs) [mmix-*-*]: Disable libgloss and gdb.
7000 	* configure.in, Makefile.tpl, Makefile.def: Remove tclX.
7011 	* Makefile.tpl (configure-target-rda): Depend on $(ALL_GCC_C).
7016 	* configure: Fix bug put in by gremlins.
7019 	* configure: Substitute more autoconfily.
7024 	* Makefile.tpl (all-sim): Depend on maybe-configure-gdb.
7029 	* Makefile.tpl: Change configure dependencies to not have real
7034 	* configure.in: Revert unintentional change.
7041 	* configure.in: Substitute more.
7042 	* configure: Run subconfigures from the Makefile.
7052 	* configure.in (host_tools): Order binutils, gas and ld for
7057 	* configure.in: Introduce rules to serialize subconfigure runs.
7059 	* configure.in: Introduce BASE_CC_FOR_TARGET.
7061 	Realize configure-build-* targets.  Realize configure-target-* targets.
7066 	* configure: Move gcc_version_trigger stuff from here...
7067 	* configure.in: ...to here.
7069 	* configure.in: Separate subconfigure options added by this file from
7079 	* configure.in: Move host-specific darwin noconfigdirs into
7089 	* configure: Remove skip-this-dir support.
7102 	* configure.in: Fix deeply stupid bug.
7104 	* configure.in: Introduce RAW_CXX_FOR_TARGET and simplify embedded
7120 	* configure: Move GDB_TK substitution to configure.in.  Move
7121 	build_modules stuff to configure.in.
7122 	* configure.in: Implement soft dependency machinery.  Maybe-ize
7123 	GDB_TK, rearrange slightly.  Move build_modules stuff from configure.
7140 	* configure.in: Produce lists of subdir targets we're actually
7142 	* Makefile.tpl: Let configure set which subdir targets are hit.
7163 	* configure: More autoconf-style substitutions.
7170 	* configure: Substitute more variables in a more autoconf-friendly
7179 	* configure.in (v810*): Remove special setting of tools.
7181 	* configure: Add support for extra required flags for ar or nm.
7182 	* configure.in (aix4.3+): Use above support for target-specific
7188 	* configure: Remove 'removing', which doesn't work.  Replace $subdir
7204 	* configure.in (target_tool): Add target-rda to list.
7214 	* configure.in (i[3456]86-*-linux*): Add check to disable
7219 	* configure.in: Add tic4x target.
7225 	* configure.in: Make SET_LIB_PATH substitution more autoconfy.
7226 	* configure.in: Make RPATH_ENVVAR substitution more autoconfy.
7241 	* configure: Restore my original patch by syncing with gcc version.
7247 	* configure.in (s390*-*-linux*): Enable libgcj.
7255 	* configure: Move stray lines back to where they belong.
7259 	* Makefile.tpl: Insert configure-target target, for src-release.
7261 	* configure: Finish reverting change which Andrew Cagney started
7282 	* configure: Revert accidentally applied changes.
7286 	* configure: Make substitution more autoconf-like.
7290 	* configure.in (arm-*-coff, strongarm-*-coff, xscale-*-coff): Use a
7297 	* configure.in (powerpc-*-darwin*): Don't configure BFD, TK, or the
7304 	* configure: Make seds more autoconfy.
7310 	* configure.in: Rewrite sed statements to look autoconfy.
7313 	all-target-foo on configure-target-foo.
7323 	* configure.in: Minor rearrangement.  Simplify tests.
7327 	* configure.in (with_headers): Skip copy if value is "yes".
7332 	* configure.in (*-*-netbsd*): Use noconfigdirs, not skipdirs.
7333 	* configure.in (sh*-*-pe*): Ditto.
7334 	* configure.in (mips*-*-pe*): Ditto.
7335 	* configure.in (*arm-wince-pe): Ditto.
7337 	* configure.in: Rearrange.
7370 	* configure.in (CC_FOR_TARGET, GCJ_FOR_TARGET, CXX_FOR_TARGET,
7375 	* configure.in (hppa*-*-openbsd*): Treat like hppa*-*-*elf*.
7379 	* configure.in (mips*-*-linux*): Don't skip target-libffi.
7383 	* configure.in: Move generic linux case to end.	 Copy generic
7399 	* configure.in: Remove two redundant tests.
7403 	* configure.in (mips*-*-irix6*o32): Enable stabs.
7407 	* configure.in: Don't build grez.
7411 	* configure.in: Ditto.
7413 	* configure.in: Remove leftover reference to gdbtest.
7417 	* configure.in (gxx_include_dir):  Change to match versioned
7426 	* configure.in: Make --without-x work.
7436 	* configure.in: Rearrange target Makefile fragment collection.
7440 	* configure.in: Ditto.
7445 	* configure.in: Eliminate 'apache' targets.
7447 	* configure.in: Eliminate redundant tests.  Reorganize.
7451 	* config-ml.in: Eliminate references to Cygnus configure.
7457 	* configure.in: Add support for ip2k.
7461 	* configure.in (host_tools): Remove cgen.
7470 	* configure.in: Fix AIX configury bug.
7474 	* configure.in: Replace ${topsrcdir} with ${srcdir}.
7476 	* configure.in: Move definition of libstdcxx_flags right above
7479 	* configure.in: Pull definition of is_cross_compiler earlier.
7481 	* configure.in: Rearrange a little.
7483 	* configure.in: Remove references to librx.
7488 	* configure.in: Eliminate ${gasdir} variable.
7492 	* configure.in: Add support for frv.
7501 	* configure.in (vax-*-netbsd*): Re-enable gas.
7507 	* configure: Likewise.
7510 	* configure.in: Eliminate version-specific references to tcl8.1, tk8.1.
7518 	* configure.in (vax-*-netbsd*): Don't build gas for this
7523 	* configure.in (noconfigdirs): Don't compile libiberty, libstdcxx
7539 	* configure: Likewise.
7540 	* configure.in: Likewise.
7544 	* configure.in: Simplify makefile fragment collection.
7546 	* configure.in: Remove code to build emacs.
7548 	* configure.in : Remove --srcdir argument from targargs and buildargs
7551 	* configure: Move some logic to configure.in.
7552 	* configure.in: Move some logic from configure.
7564 	* configure.in (noconfigdirs): Don't disable libgcj on
7569 	* configure.in: Revert 2002-04-18's patch; fixed in libjava.
7573 	* configure.in (FLAGS_FOR_TARGET): Do not add
7579 	* configure.in (noconfigdirs): Replace [ ] with test.
7581 	* configure.in (noconfigdirs): Do not add target-newlib if
7591 	* configure.in: delete reference to absent file
7593 	* configure.in: replace '[' with 'test'
7595 	* configure.in: Eliminate references to gash.
7598 	* configure.in: remove useless references to 'pic' makefile fragments.
7600 	* configure.in: (*-*-windows*) Finish removing.
7602 	* configure.in: Eliminate redundant test for libgui.
7606 	* configure.in (h8300*-*-rtems*): Disable libf2c and libgcj.
7611 	* configure.in: remove references to dead files
7615 	* configure.in: Disallow configuring libgcj when it is already
7621 	* configure.in:  Move default CC setting out of config/mh-* fragments
7626 	* configure.in: don't even try to configure or make a subdirectory
7627 	if there's no configure script for it.
7638 	(CONFIGURE_TARGET_MODULES): Remove configure-target-libchill.
7642 	(configure-target-libchill): Remove.
7644 	* configure.in (target_libs): Remove target-libchill.
7650 	* Makefile.in, configure.in, configure: Sync with gcc, entries
7655 	* configure.in: Add FLAGS_FOR_TARGET to GCJ_FOR_TARGET.
7660 	* configure.in (i*86-*-netbsdelf*): Don't disable libgcj.
7664 	* configure.in (alpha*-dec-osf*): Enable libgcj.
7669 	* configure.in (mcore-pe): Disable the configuration of
7674 	* configure.in: Enable libgcj for xscale-elf target.
7678 	* configure.in (libstdcxx_flags): Don't add libstdc++-v3 flags for
7684 	* configure.in (CXX_FOR_TARGET): Add -shared-libgcc for
7698 	* configure.in: Added sh64-*-*.
7707 	* configure, configure.in: Use temp file for long sed commands.
7711 	* configure.in (noconfigdirs) [h8300*-*-*, h8500-*-*]: Disable
7716 	* configure.in (noconfigdirs) [mmix-*-*]: Disable libgcj.
7720 	* configure.in (noconfigdirs) [cris-*-*]: Disable libgcj.
7724 	* configure: Handle temporary files securely using mkdir.
7728 	* configure.in (*-*-linux*): Disable configuration of target-newlib
7742 	* configure.in (sh-*-linux*): New.
7746 	* configure.in (noconfigdirs): Don't compile libiberty, libstdcxx
7756 	* configure.in (libstdcxx_flags): Do not try to execute
7761 	* configure.in (libstdcxx_flags): Remove reference to libstdc++.INC.
7769 	* configure.in: Move *-chorusos target case to the proper switch.
7780 	* configure.in: Likewise.  Accept `parisc' alias for `hppa'.
7798 	* configure.in: Only use `lang_requires' for languages athat are
7803 	* configure.in: Allow config-lang.in to set `lang_requires' to list
7821 	* configure.in (target_libs): Remove libg++.
7831 	(configure-target-libg++): Remove.
7833 	(configure-target-libio): Remove.
7840 	(configure-target-libstdc++): Remove.
7847 	* configure: Introduce GCJ_FOR_TARGET.
7848 	* configure.in: Ditto.
7853 	* configure.in: for *-chorusos, don't config target-newlib and
7859 	* configure.in: Remove --enable-libstdcxx_v3 support.
7863 	* configure.in (target_makefile_frag) [alpha*-*]: Use mt-alphaieee.
7867 	* configure.in: Allow libgcj to be built on Sparc Solaris.
7871 	* configure.in: Enable libgcj on several additional platforms.
7875 	* configure.in: Enable libgcj for linux targets.
7884 	* configure: handle DOS-style absolute paths.
7888 	* configure.in: remove supported directories from $noconfigdirs for DJGPP.
7896 	* configure.in (gxx_include_dir): Use it.
7900 	* configure.in: Handle lang_dirs.
7904 	* configure.in: Disable libgcj for any target not specifically
7914 	* configure.in: Define libgcj.  Disable libgcj target libraries for
7919 	* configure.in (target_libs): Revert 2000-12-08 patch.
7930 	* configure.in (target_libs): Removed `target-libjava'.
7939 	(configure-target-fastjar, all-target-fastjar): Likewise.
7940 	* configure.in (host_tools): Added fastjar.
7948 	* configure.in (enable_libstdcxx_v3): Fix typo,
7953 	* configure: Provide the original toplevel configure arguments
7959 	* configure: Turn on libstdc++ V3 by default.
7963 	* configure (gcc/configargs.h): Only create if there is a build GCC
7968 	* configure: Save configure arguments to gcc/configargs.h.
7978 	* configure.in: Do not build byacc for hppa64.  Provide paths to the
7986 	* configure.in (host_libs): Add zlib.
7990 	* configure.in (FLAGS_FOR_TARGET): Use $target_configdirs and
7993 	* configure.in [disable-libstdcxx-v3] (libstdcxx_flags): Search
7998 	* configure.in (libstdcxx_flags): Remove -isystem $$s/libio/stdio.
8000 	* configure: Make enable_threads and enable_shared defaults
8002 	* configure.in: Accept *-*-linux* not just *-*-linux-gnu*.
8007 	* configure.in: Re-enable all references to libg++ and librx.
8011 	* configure.in: Add *-*-freebsd* configurations.
8052 	* configure.in: Enable gprof for mips*-*-linux*.
8056 	* configure.in (libstdcxx_flags): Don't add libstdc++-v3 flags for
8078 	* configure.in: Added sh64-*-*.
8108 	* configure.in (*-*-netbsd*): New.  Skip target-newlib,
8114 	* configure.in: Import StrongARM and XScale target_configdirs from
8126 	* configure.in (ia64*-*-hpux*): New target for IA64 HP-UX,
8139 	* configure.in: Remove target-bsp and target-cygmon from arm builds.
8153 	* configure.in (FLAGS_FOR_TARGET): Remove -nostdinc and -isystem
8180 	(all-build-libiberty): Depend on configure-build-libiberty.
8182 	* configure: Calculate and substitute proper value for
8184 	* configure.in: Create the build subdirectory.
8229 	* configure.in (--enable-languages): Be more permissive about
8246 	* Makefile.in (configure-target-gperf): Depend on $(ALL_GCC_CXX).
8263 	* configure.in (sparc-sun-solaris2*): Don't use /usr/bin/which on
8279 	* configure.in: Enable libstdc++-v3 for h8300 targets.
8341 	* configure.in : enable ld for aix
8352 	of subdir/configure scripts to use the new libtool.m4.
8361 	* configure.in (noconfigdirs) [*-cygwin*, *-mingw*, *-beos]: Disable
8366 	* configure.in (noconfigdirs): Don't reset it from scratch in the
8371 	* configure.in (noconfigdirs) [hppa*-*-*, mips*-*-irix6*,
8376 	* configure.in (libgcj_saved): Copy from $libgcj.
8395 	* configure.in: Subst CXX_FOR_TARGET_FOR_RECURSIVE_MAKE.
8399 	* configure.in (CXX_FOR_TARGET): Use xgcc for libstdc++-v3.
8439 	* configure.in (noconfigdirs): Allow configuration of texinfo
8446 	* configure.in: Likewise.
8450 	* configure: Output host type to stdout, not stderr.
8497 	* Makefile.in (ETC_SUPPORT): Add configure.texi and associated info
8506 	* configure.in (host_tools): Add sid.
8507 	Always configure cgen.
8517 	* configure.in: Disable language-specific target libraries for
8522 	* configure.in (xscale-elf): Add target.
8538 	configure-target-<library> when their configure scripts need the C
8557 	* configure.in (noconfigdirs): Don't compile some
8564 	all affected `configure' scripts.
8589 	* configure.in (FLAGS_FOR_TARGET): Use -nostdinc even for Canadian
8610 	* configure.in (host_tools): Add cgen.
8611 	Only configure cgen if --enable-cgen-maint.
8619 	* configure.in (libstdcxx_flags): Use
8624 	* configure.in (libstdcxx_flags): Use libstdc++-v3/src/INCLUDES.
8628 	* configure.in (CC_FOR_TARGET, CHILL_FOR_TARGET,
8635 	* configure.in (FLAGS_FOR_TARGET): invert test for xgcc, should mean
8642 	* configure.in (libstdcxx_flags): Don't use `"'.
8649 	* configure.in (CHILL_FOR_TARGET, CXX_FOR_TARGET): Convert blanks to
8654 	* configure.in (qCXX_FOR_TARGET): Use echo instead of expr.
8658 	* configure.in (qCXX_FOR_TARGET): Quote `&' characters in
8663 	* configure.in (CC_FOR_TARGET, CHILL_FOR_TARGET, CXX_FOR_TARGET):
8664 	Do not override if already set in the environment or in configure.
8673 	* configure.in: ... here.
8679 	* Makefile.in (configure-target-libf2c): Depend on $(ALL_GCC).
8680 	(configure-target-libchill, configure-target-libobjc): Likewise.
8682 	* configure.in: Use the same cache file for all target libs.
8687 	* configure (topsrcdir): Don't use dirname.
8691 	* configure.in: Remove all references to libg++ and librx.
8693 	* configure, configure.in, Makefile.in: Unify gcc and binutils.
8701 	* configure.in (host_makefile_frag): Use mh-ia64pic on IA-64 hosts.
8716 	will allow link tests run by configure scripts in
8730 	* configure.in (noconfigdirs): Set noconfigdirs for tic54x target.
8758 	* configure.in (hppa*64*-*-*): Do build ld for this configuration.
8762 	* Makefile.in (configure-target-libiberty): Depend on
8763 	configure-target-newlib.
8767 	* configure.in, Makefile.in: Merge all libffi-related
8784 	* configure.in: Special case powerpc*-*-aix* target_makefile_frag.
8797 	* configure.in (ia64*-*-elf*): Add gdb and friends to noconfigdirs.
8840 	* configure (warn_cflags): Delete.
8845 	* configure.in (enable_libstdcxx_v3): Add.
8857 	* configure.in: -linux-gnu*, not -linux-gnu.
8869 	* configure.in: Add entry for mips*-*-linux*, move catch all
8888 	* configure.in: Likewise.
8892 	* configure.in: Add mips-pe, sh-pe and arm-wince-pe targets.
8900 	* configure (gcc_version): When setting, narrow search to
8925 	* configure.in: Don't build some bits for beos.
8934 	* configure.in: Use mt-aix43 to handle *_TARGET defs,
8953 	* configure: Fix quoting inside arguments of eval.
8963 	* configure.in (i370-ibm-opened*): New.
8975 	* configure.in: Do not configure or build ld for AIX
8989 	* configure.in (i[3456]-*-mingw32*): Don't put gprof in
9000 	* configure (tmpfile): Change cONf$$ to cNf$$ to avoid an overly
9014 	* configure.in (target_libs): Added target-zlib.
9020 	(configure-target-zlib): New target.
9023 	(configure-target-libjava): Depend on configure-target-zlib.
9025 	* Makefile.in (configure-target-libjava): Depend on
9026 	configure-target-newlib.
9027 	(configure-target-boehm-gc): New target.
9028 	(configure-target-qthreads): New target.
9030 	* configure.in (target_libs): Added target-qthreads.
9037 	(configure-target-libjava): Depend on configure-target-qthreads.
9047 	* configure.in (target_libs): Added libjava, boehm-gc.
9052 	configure.bat in SUPPORT_FILES.
9060 	* configure.bat: Remove; obsolete.
9064 	* configure: Add -W -Wall to the default CFLAGS when compiling with
9069 	* configure.in: Build ld, binutils & gas for hppa*-*-linux-gnu*.
9073 	* configure.in: Build ld on IRIX6.
9121 	* configure.in (noconfigdirs): Don't build libstub for arm-elf targets.
9132 	* configure.in (i?86-*-beos*): Do config gperf; don't config
9151 	* configure.in (d30v-*): Use config/mt-d30v as makefile fragment,
9172 	* configure (gxx_include_dir): Removed.
9174 	* configure.in (gxx_include_dir): Handle it.
9187 	* configure.in (pc-msdosdjgpp): Set host_makefile_frag to
9202 	* configure.in: cleanup, add mh-*pic handling for arm, special
9207 	* configure.in (noconfigdirs): Removed target-libgloss so libnosys.a
9212 	* configure.in: Added bsp support to arm-*-coff and arm-*-elf
9229 	* configure.in (noconfigdirs): Changed target_configdirs to
9236 	* configure.in (*-*-windows*): Remove, no longer used.
9262 	* configure.in: Added target-bsp for sparclite.
9270 	* configure.in: Add support for strongarm port.
9275 	* configure.in (*-*-cygwin32*): Use config/mh-cygwin instead of
9281 	* configure.in: Do build ld for ix86 Solaris.
9291 	* configure.in (arm-*-oabi):  Handle.
9301 	* configure.in: Likewise.
9312 	* configure.in: makefile stub for cygwin target is probably
9317 	* configure.in: libtermcap.a should be built when cygwin is the
9336 	* configure.in: Add cygmon for x86-coff and x86-elf. Configure
9341 	* configure.in: Added target-bsp for several target architectures.
9355 	* configure (skip-this-dir): Add handling for new shell script, which
9356 	might be created by a sub-directory's configure to indicate, this particular
9372 	* configure.in: Add libtermcap to list of cygwin dependencies.
9381 	* configure.in (host_tools): Added zip.
9395 	* configure.in: Use -Os to build target libraries for the fr30.
9403 	* configure.in: drop "32" from config/mh-cygwin32.  Check
9413 	* Makefile.in configure.in: Add the ability to use tcl8.1 and tk8.1
9427 	* configure: Add pattern to replace "build_tooldir"'s
9452 	* configure.in: Likewise.
9458 	* configure.in: ditto
9467 	* configure.in (target_libs): Add libchill.
9471 	* configure.in (target_subdir): Remove duplicate line.
9479 	* configure.in: Minor cleanups for building in the $(target_alias)
9499 	* configure.in: Likewise.
9517 	* configure.in: Do not assume x86-svr4 or x86-unixware can handle
9527 	* configure.in (target_libs): Add libchill.
9536 	* configure (gxx_include_dir): Changed to
9548 	* configure.in: Use mh-aix43.
9552 	* configure: Fix --without/--disable cases for gxx-include-dir.
9565 	* configure.in: Add arm-elf and thumb-elf support.
9586 	* configure (extraconfigdirs): New variable.
9599 	(configure-target-libjava): Depend on $(ALL_GCC).
9615 	configure.
9623 	* configure.in (target_subdir): Set to ${target_alias} instead
9628 	* configure.in (target_subdir): Set to libraries if enable_multilib.
9638 	* configure.in: Strip any --no option from CONFIG_ARGUMENTS, to
9643 	* configure.in: Win32 hosts shouldn't use install -x
9650 	* configure.in: Don't build some bits for beos.
9654 	* configure: If CC is set but CFLAGS is not, and CC is gcc, make
9681 	* configure.in (target_subdir): Set to ${target_alias} instead
9689 	* configure (gcc_version): Change default initializer to empty
9699 	* configure (enable_version_specific_runtime_libs): Implement new flag
9707 	* configure (gcc_version): Initialize properly depending on
9708 	how and where configure is started.
9714 	* configure.in (noconfigdirs): Add configure pattern for mips tx39
9719 	* configure.in: Add cygmon and libstub support for mn10200.
9723 	* configure (gcc_version): Add new variable describing the
9752 	* configure.in: Add cygmon and libstub support for mn10300.
9767 	* configure: Use && rather than using -a in test, because odd
9769 	* configure.in: Likewise.
9802 	* configure.in: Add --with-newlib to CONFIG_ARGUMENTS if we are
9817 	* configure.in: Change alpha to alpha* in several places.
9825 	* configure.in (--enable-target-optspace): Remove debug echo.
9829 	* configure: Set CXXFLAGS from CXXFLAGS, not CFLAGS.
9841 	* configure.in (target_makefile_frag): If --enable-target-optspace,
9845 	* configure.in (target_cflags): Ditto for d30v.
9857 	* configure.in (host_tools): Fix typo, lbtool -> libtool.
9869 	* configure.in: Ditto. Build libstub for targets that have cygmon
9874 	* configure.in: Don't set PICFLAG on ix86-cygwin32.
9878 	* configure.in: Recognise i[3456]96-*-sysv5* as a valid host, and
9883 	* configure: Define DEFAULT_M4 by searching PATH.
9890 	* Makefile.in, configure.in: Add libtool as a native only directory
9891 	to configure and build.
9904 	* configure.in: add ash to native_only and host_tools lists
9914 	* configure.in (host_tools): Added gettext.
9921 	* configure: Do not disable building gdbtk for cygwin32 hosts.
9925 	* configure.in: Add thumb-coff target.
9972 	* configure.in: Add Thumb-pe target.
9977 	* configure.in - changed sn targets to snavigator
9987 	* configure: When making link, also check the current
9988 	directory. The configure scripts may create one.
9996 	* configure.in: Revert 3 Jan change for powerpc-linux-gnulibc1.
10010 	* configure.in: Remove libgloss from noconfigdirs for MN10300.
10014 	* configure.in: Don't build libgui for a cygwin32 target when not on
10019 	* configure (redirect): Set to null, so default behavior of
10020 	configure is now --verbose.
10024 	* Makefile.in ($(CONFIGURE_TARGET_MODULES)): Run configure with
10048 	* configure: Emit a definition for the new macro enable_shared
10053 	* configure.in (host_tools, native_only): Add libtool.
10057 	* configure.in: add target-gperf to noconfigdirs for Cygwin32.
10075 	* configure.in (target_libs): Add libf2c.
10079 	* configure.in: Remove expect from noconfigdirs when target
10085 	* configure.in: Do build expect, dejagnu, and cvssrc for a cygwin32
10098 	* configure (package_makefile_rules_frag): New variable, which names
10101 	* configure: Undo last change.
10110 	* configure (package_makefile_frag): Move inserting the
10125 	* configure.in: Revert 3 Jan change for alpha-linux-gnulibc1.
10134 	* configure.in: Check makefile fragments in the source
10139 	* configure.in: Check whether host and target makefile
10144 	* configure.in (target_configdirs): Add cygmon for sparc64-elf.
10148 	* configure.in: Make sure we only replace RPATH_ENVVAR on
10167 	* configure.in: Likewise.
10171 	* configure.in: Finalize support for {alpha|powerpc}*-*-linux-gnulibc1
10176 	* configure (gxx_include_dir): Provide a definition for subdirs
10190 	* configure.in: It's alpha*-...
10194 	* configure.in (host_makefile_frag, target_makefile_frag):
10205 	* configure.in (d30v-*-*): Allow configuring of libide, vmake, etc.
10211 	* configure.in: Add libgui directory.
10212 	* configure: Add all-libgui to GDB_TK.
10230 	* configure.in (host_tools): Change cvs to cvssrc.
10241 	* configure (gxx_include_dir): Fix thinko.
10250 	* configure.in (noconfigdirs): Add support for Thumb target.
10258 	* configure.in: Build cygmon for sparc-elf and sparclite-aout.
10263 	* configure (gxx_include_dir): Provide a definition for subdirs
10268 	* Makefile.in, configure, configure.in, ChangeLog: merge with foundry's
10284 	* configure.in (i[3456]86-ncr-sysv4.3*): Tweak.
10293 	* configure.in (d30v-*-*): Configure all directories.
10297 	* configure.in (d30v-*-*): Configure newlib, libiberty directories
10302 	* configure.in (d30v-*-*): Configure target-libgloss on the D30V.
10313 	* configure.in (d30v-*-*): Configure GCC now.
10317 	* configure.in: Remove a "second pass" of tweaking noconfigdirs,
10344 	* configure: Handle autoconf style directory options: --bindir,
10360 	* configure.in (d30v):  Remove tcl, tk, expect, gdb, itcl, tix, db,
10380 	* configure (tooldir): enable_gdbtk=YES for cygwin32, NO for
10381 	windows.  Consistent with gdb/configure.
10385 	* configure.in: Name Linux target fragment.
10387 	* configure: Rewrite so that project Makefile fragment is inserted
10396 	* configure.in: remove bison from noconfigdirs for Cygwin32 host
10402 	* configure.in (skipdirs): Add target-librx for Linux.
10427 	* configure.in (*-*-rtems*): Do not build libgloss for rtems.
10444 	* configure.in (target_subdir): Set to libraries if enable_multilib.
10466 	* configure.in (noconfigdirs): Add support for v850e target.
10472 	* configure.in (noconfigdirs): Add support for v850ea target.
10491 	* configure: Get CFLAGS and CXXFLAGS from Makefile, if possible.
10493 	* configure: When handling a Canadian Cross, handle YACC as well as
10506 	* configure: If OSTYPE matches *win32*, try to find a good value for
10512 	configure.in if it is present.
10521 	* configure.in: Likewise.
10530 	* configure: Changed sed delimiter from ':' to '|' when
10551 	* configure (tooldir): Set BISON to `bison -y' and not just bison.
10591 	* configure: Treat msdosdjgpp like go32.
10592 	* configure.in: Likewise.  Don't remove gprof for go32.
10594 	* configure: Change Makefile.tem2 to Makefile.tm2.
10598 	* configure.in (noconfigdirs): For alpha-dec-osf*, don't ignore grep.
10607 	* configure (GDB_TK): Needs itcl and tix.
10623 	* configure.in: If host is *-*-cygwin32*, set INSTALL_PROGRAM_ARGS
10629 	* configure.in, Makefile.in: Treat tix like itcl.
10641 	* configure: Treat WINDRES like DLLTOOL, and WINDRES_FOR_TARGET like
10646 	* configure.in: configure sim before gdb for win32-x-ppc
10651 	* configure.in (target_tools): Add target-gperf.
10655 	(configure-target-gperf): Empty rule.
10657 	(CONFIGURE_TARGET_MODULES): Add configure-target-gperf.
10668 	* configure.in: Don't set ENABLE_MULTILIB, so we'll be passing
10673 	* configure.in: If we're building mips-sgi-irix6* native, turn on
10682 	* configure.in: Use mh-ppcpic and mt-ppcpic for powerpc*-* targets.
10684 	* configure: Set CFLAGS and CXXFLAGS, and substitute them into
10692 	* configure.in: Build itl, db, sn, etc., when building for native
10705 	* configure.in (targargs): Strip out any supplied --build argument
10710 	* configure.in (targargs): Pass --build if we're doing
10715 	* configure: Use '|' instead of ":" as the separator in
10726 	* configure.in: Use install-sh, not install.sh.
10741 	* configure.in (host_tools): Add automake.
10745 	* configure: Default CXX to c++, not gcc.
10756 	* configure.in: Turn on multilib by default.
10772 	* configure.in: if target is cygwin32 but host isn't cygwin32,
10773 	don't configure gdb tcl tk expect, not just gdb.
10777 	* configure.in: Added gnuserv everywhere sn appears.
10805 	* configure: Use ${config_shell} with ${moveifchange}.  From Thomas
10815 	cfg-paper*, configure.{texi,man,info*}._
10828 	* configure.in (hppa1.1-*-rtems*): New target, like hppa-*-*elf*.
10832 	* configure.in: Remove noconfigdirs case since gdb also
10837 	* configure: Set cache_file to config.cache.
10846 	* configure.in (tic80-*-*): Remove G++ libraries and libgloss from
10860 	* configure.in (host_tools): Put sim before gdb, so gdb's
10861 	configure.tgt can determine if the simulator was configured.
10882 	* configure.in (noconfigdirs): Remove tcl and tk from
10887 	* configure.in (tic80-*-*): Remove ld from noconfigdirs.
10900 	* configure.in (noconfigdirs): Disable target-newlib,
10905 	* configure.in (noconfigdirs): Enable ld for d30v.
10909 	* configure.in (tic80-*-*): Build compiler.
10913 	* configure.in (d30v-*): Remove sim directory from list of
10918 	* config.sub, configure.in: Add d30v target cpu.
10953 	* configure.in: build gdb for mn10200
10961 	* configure.in (tic80-*-*): Turn off most targets right now.
10971 	* configure.in: Remove uses of config/mh-linux.
10992 	* configure.in (mips*-sgi-irix6*): Remove binutils from noconfigdirs.
10996 	* configure.in: Do build gcc and the target libraries for
11001 	* configure.in: don't avoid building gdb for mn10300 any more
11007 	* configure.in: Don't use --with-stabs on IRIX 6.
11011 	* configure.in (m32r): Build gdb, libg++ now.
11015 	* configure.in (mips*-sgi-irix6*):  Remove gdb and related
11033 	* configure.in: add findutils to list of host_tools
11041 	* configure.in (d10v-*): Do not build librx.
11045 	* configure.in (mn10300): Build everything except gdb & libgloss.
11111 	* configure.in (powerpc*-{eabi,elf,linux,rtem,sysv,solaris}*): Do
11116 	* configure.in (*-*-windows):  Exclude everything but those dirs
11125 	* configure.in:  Exclude mmalloc from i386-windows.
11144 	* configure: Handle GCC_FOR_TARGET like CC_FOR_TARGET.
11158 	* configure.in (m32r): Fix spelling of libg++ libs.
11166 	* configure: Don't get confused by CPU-VENDOR-linux-gnu.
11168 	* configure: Rework yesterday's sed script patch.
11187 	* configure: Avoid hpux10.20 sed bug.
11191 	* configure.in:  Add support for windows host
11200 	* configure.in: If configuring for newlib, pass --with-newlib to
11208 	* Makefile.in (ETC_SUPPORT): Add configure.
11212 	* configure.in: Use config/mh-dgux386 for i[345]86-dg-dgux
11217 	* configure.in: Break mn10x00 support into separate
11223 	* configure.in: Add lots of stuff to noconfigdirs for
11226 	* config.sub, configure.in: Add mn10x00 support.
11234 	* configure.in (noconfigdirs): Don't build libgloss for arm-coff
11241 	* mpw-configure: Add --norecursion and --help options.
11249 	* configure.in:  You can now configure GDB for the v850.
11253 	* configure.in (noconfigdirs): Don't configure any C++ dirs
11262 	* configure.in: Use a single line for host_tools and native_only.
11266 	* config.sub, configure.in: Add entries for m32r.
11274 	* configure.in:  Don't config lots of things for *-*-windows*.
11279 	(host_libs, host_tools): Copy from configure.in.
11280 	* mpw-configure: Don't complain about directories not found.
11284 	* configure.in (i[345]86): Recognize i686 for pentium pro.
11292 	* configure.in (noconfigdirs): Removed gdb for D10V.
11296 	* configure.in: Remove ld, target-libio, target-libg++, and
11301 	* configure: Fix three locations where shell scripts were
11306 	* configure.in (v850-*-*): Set up initial $noconfigdirs.
11311 	* mpw-configure: Handle multiple enable/disable options and
11318 	* configure.in (powerpc*-*-*): For eabi, system V.4, Linux, and
11332 	* configure.in (*-*-ose): Remove exclusion of libgloss for this
11341 	* configure.in (d10v-*-*): Remove ld from $noconfigdirs.
11345 	* configure.in (native_only): Add prms.
11354 	* configure.in (d10v-*-*): Don't configure ld or gdb until the
11359 	* configure.in (d10v-*-*): New target.
11374 	* mpw-configure: Look for g-mpw-make.sed in config/mpw.
11399 	* configure.in (mips-sgi-irix6*): Use mh-irix6 instead of mh-irix5.
11407 	* mpw-configure: Add support for --bindir.
11412 	* configure.in: add bash, time, gawk to list of hosttools and things
11425 	* configure.in: build diff and patch for cygwin32-hosted
11434 	* configure.in: enable dosrel for cygwin32-hosted builds,
11445 	* configure.in (mips*-sgi-irix6*): Set noconfigdirs appropriately.
11460 	* configure.in (alpha*-*-*vms*): Set noconfigdirs.
11469 	* configure: enable_gdbtk=no for cygwin32-hosted toolchains
11470 	* configure.in: remove make from disable-if-Can-Cross list
11486 	* configure.in: Added copyright notice.
11491 	* configure.in (powerpcle-*-solaris*): Until we get shared
11521 	* configure.in (alpha-*-linux*): Set enable_shared to yes.
11525 	* mpw-configure: Handle --enable-FOO and --disable-FOO.
11529 	* configure.in (*-*-cygwin32): Configure make.
11546 	* configure.in (powerpcle-*-solaris*): Turn off tk and tcl
11551 	* configure.in: Don't configure --with-gnu-ld on AIX.
11555 	* configure.in (powerpcle-*-solaris*): Turn off gdb temporarily.
11565 	* configure.in (host_tools): Added inet.
11571 	* configure.in: Don't configure libgloss if we are not configuring
11576 	* configure.in: Don't configure libgloss for unsupported
11590 	* configure.in: Added apache everywhere perl is seen.
11599 	* configure.in (*-*-ose) do not build libgloss.
11608 	* configure.in: Permit --enable-shared to specify a list of
11613 	* configure.in (host==solaris): Pass only the first word of $CC
11631 	* configure.in (host_tools): Include perl and guile.
11638 	* configure (--enable-*): Handle quoted option lists such as
11648 	* configure.in: Add missing global flag in sed substitution when
11656 	* configure.in (mips*-nec-sysvr4*): Use a host_makefile_frag of
11669 	* configure: Restore Canadian Cross handling of BISON and LEX,
11686 	* configure.in (m68k-*-netbsd*): Build everything now.
11694 	* configure.in (sparclet-*-*): Build everything now.
11698 	* configure.in (m68k-*-linux*): New host.
11702 	* configure: Check for bison before byacc.
11706 	* Makefile.in configure:  Change the way LEX and BISON/YACC are
11707 	set.  configure now defines DEFAULT_LEX and DEFAULT_YACC by
11718 	* configure.in (host *-*-cygwin32): Don't build gdb if we are
11723 	* configure.in: Don't get CC from the host Makefile fragment if we
11736 	* configure.in: On HP/UX, set RPATH_ENVVAR to SHLIB_PATH.
11740 	* config.sub, configure.in: Recognize sparclet cpu.
11763 	* configure.in: If --enable-shared was used, set SET_LIB_PATH to
11788 	* configure.in (noconfigdirs): Add missing # in front of comment.
11792 	* configure.in: add second pass to things added to noconfigdirs
11797 	* mpw-configure (extralibs_name, rez_name): Set correctly
11804 	* configure.in, config.sub: Recognize cygwin32.
11833 	* configure: Pass --nfp to recursive configures.
11844 	* configure: Add DLLTOOL.
11849 	* configure.in (i[345]86-*-sco3.2v5*): Use mh-sysv instead of
11859 	* configure.in: Make sure that ${CC} can be used to compile an
11865 	* configure (GDB_TK): Set GDB_TK to either "all-tcl all-tk" or
11874 	* configure.in (noconfigdirs): Put ld or gas in this early, if the
11907 	* configure.in (noconfigdirs): Add gas or ld if --with-gnu-as=no or
11917 	* configure.in (i386-win32): Don't build expect if we're not
11922 	* Makefile.in: (configure-target-examples, all-target-examples):
11923 	New targets, configure and build example programs.
11927 	* mpw-configure: If an mpw-config.in generated a file mk.sed,
11942 	* configure.in (host==powerpc-pe): Add many directories to noconfigdirs
11949 	* configure.in (noconfigdirs): Exclude target-newlib for all versions
11954 	* mpw-configure: Add support for exec-prefix.
11963 	* configure: Ignore new autoconf configure options.
11972 	* configure.in (noconfigdirs): Disable target-libio on v810-*-*.
11976 	* configure.in: Don't configure gas for alpha-dec-osf*.
11980 	* configure.in: Default to --with-stabs for some targets for which
11988 	controlling which directories to configure.  Remove extraneous
11994 	with configure's.
11998 	* configure: Don't turn -v into --v.
12002 	* configure.in (targargs): Fix typo.
12008 	* configure.in: Strip --host and --target options from
12009 	CONFIG_ARGUMENTS, and always configure for --host only.  Add
12011 	* configure: Canonicalize the arguments put into config.status by
12022 	* configure.in (target_configdirs): add target-winsup only
12028 	configure-target-newlib, since when libgloss is built it looks to
12038 	* configure: Handle LD and LD_FOR_TARGET when configuring a
12043 	* configure.in (target_libs): add target-winsup.
12052 	(configure-target-libg++): Depend on configure-target-librx.
12056 	* configure: Ensure srcdir="." if that's what it is.
12062 	* mpw-configure (--with-gnu-ld): New option, controls whether
12070 	* configure.in: Configure grez resource compiler if targeting Mac.
12075 	* configure: CXX defaults to gcc, not g++.  If we find
12080 	* configure: Default ${build} correctly.  Avoid picking up extra
12084 	* configure.in: When doing a Canadian Cross, don't try to
12085 	configure tools whose configure script can't handle it.
12093 	* configure:  Remove dubious bug reporting address.
12098 	configure script, run that instead of this directory's configure.
12103 	* configure.in: Before checking for the existence of various files,
12118 	* configure.in: If the only directory in target_configdirs which
12125 	* configure.in (host_makefile_frag): Use m68k-sun-sunos* instead
12131 	* configure.in (copy_dirs): Use sys-include instead of include
12136 	* Makefile.in, configure.in: Make winsup builds work with
12141 	* configure.in: Build the linker on AIX.
12158 	* configure.in:  Rename libFOO to target-libFOO, and xiberty
12163 	-> all-target-libiberty, configure-libFOO -> configure-target-libFOO,
12168 	(configure-target-XXX):  Depend on $(ALL_GCC), not all-gcc, to
12169 	allow ALL_GCC="" to only configure.
12180 	* configure.in:  Make sure that CC is undefined (as opposed to
12182 	problem with autoconf trying to configure on a host without GCC.
12186 	* mpw-configure: Set host alias from choice of host compiler,
12214 	* configure.in (host_makefile_frag): mh-aix & mh-sun removed.
12227 	* configure.in (i[345]86-*-win32): Always build newlib.
12228 	Don't configure cvs, autoconf or texinfo.
12237 	* configure.in: Winsup is configured when target is win32.
12247 	* configure: Fix sed loop which substitutes for CC and CXX to
12257 	* configure.in: Stop putting gas and binutils in noconfigdirs for
12280 	* configure.in: Allow configuration and build of emacs19 for the alpha.
12284 	* configure.in (CC): Get ^CC, not just any old CC, from
12289 	* configure.in (CC): Try to get CC from
12294 	* Makefile.in (TARGET_CONFIGDIRS): configure targetdirs
12299 	* configure: If CC and CXX are not set in the environment, set
12302 	* configure.in: Remove libm from target_libs.  Separate
12311 	by configure.in.
12316 	(configure-libg++, configure-libio): New targets.
12317 	(all-libg++): Depend upon configure-libg++.
12318 	(all-libio): Depend upon configure-libio.
12319 	(configure-libgloss, all-libgloss): New targets.
12320 	(configure-libstdc++): New target.
12321 	(all-libstdc++): Depend upon configure-libstdc++.
12322 	(configure-librx, all-librx): New targets.
12323 	(configure-newlib): New target.
12324 	(all-newlib): Depend upon configure-newlib
12325 	(configure-xiberty): New target.
12326 	(all-xiberty): Depend upon configure-xiberty.
12330 	* configure.in (host i[345]86-*-win32):  Expand the
12335 	* mpw-configure: Fix sed command file name.
12339 	* configure.in (host i[345]86-*-win32): Reduce the
12344 	* configure.in: Don't configure ld and gdb for powerpc*-*-winnt*
12350 	* mpw-configure: New option --cc to select compiler to use,
12371 	* configure.in (noconfigdirs): Disable libg++ and libstdc++ on
12376 	* configure.in (noconfigdirs): Disable bfd, binutils, gas, gcc,
12388 	* configure.in (noconfigdirs): Disable gdb on m68k-*-netbsd*.
12392 	* configure.in: Build ld in mips*-*-bsd* case.
12405 	* configure.in: treat i386-win32 canadian cross the same as
12423 	* configure: Add Makefile.tem to list of files to remove in trap
12446 	* configure.in (i386-go32 host): Fix typo (deja-gnu -> dejagnu).
12458 	mpw-configure.
12462 	* configure.in (appdirs): Use =, not ==, in test expression when
12491 	* configure.in: Don't build newlib for *-*-vxworks5.1.
12495 	* configure.in: Don't build newlib for a29k-*-vxworks5.1.
12518 	* config.sub, configure.in (win32): New target and host.
12522 	* configure.in: Add i386-pe configuration.
12540 	* configure: If per-host line isn't found, but AC_OUTPUT is found
12541 	and a configure script exists, run it instead.
12549 	* configure: Set build_{cpu,vendor,os,alias} to host values when
12564 	* configure.in (noconfigdirs): Enable all packages for
12569 	* configure.in (noconfigdirs): Don't configure tk for i386-go32
12576 	* configure.in: Omit arm linker only for riscix.
12592 	* configure.in (hppa*-*-lites*): Treat like hppa*-*-*elf*.
12609 	* configure.in: Don't build newlib for m68k-vxworks5.1.
12613 	* configure.in (mips-sgi-irix6): Use mh-irix5.
12627 	* configure.in: Recognize --with-newlib.
12643 	* mpw-configure: Added copyright.
12652 	* mpw-configure: Remove subdir-specific makefile hackery,
12657 	* mpw-configure (host_canonical): Set.
12666 	* mpw-configure (host_alias, target_alias): Rename from hostalias
12671 	* mpw-configure (config.status): Write only if changed.
12682 	* mpw-configure (prefix, mpw_prefix): Handle it.
12683 	* mpw-config.in (mmalloc, readline): Don't configure.
12691 	* mpw-configure: Add more things to the top of each configured
12699 	* mpw-configure: New file, configure script for MPW.
12704 	* configure.in (host_libs): Remove glob, since it is gone from the
12711 	* configure.in(target_makefile_frag): use config/mt-netware
12735 	* configure.in: Fix --enable-shared logic in per-host.
12739 	* configure.in (*-hp-hpux[78]*): Use mh-hpux8.
12743 	* configure.in (noconfigdirs): Don't build gas on AIX, for
12748 	* configure: Fix --cache-file to work if the file argument is a
12753 	* configure: If the --cache-file is used, pass it down to
12754 	configure in subdirectories.
12782 	* configure.in (enable_shared stuff): Fix typo.
12794 	* configure.in (rs6000-*-*): Don't build gas.
12809 	* configure: Don't use $ when handling program_suffix.
12813 	* configure.in:  Configure tk for hppa/hpux.
12830 	* configure.in (*-*-netware*): Don't configure xiberty.
12834 	* configure.in:  Remove tk from native_only list.
12843 	* Makefile.in (DEVO_SUPPORT): Remove configure.bat and
12845 	(binutils.tar.gz, gas+binutils.tar.gz): Add configure.bat and
12865 	* configure.in: Support --enable-shared.
12869 	* configure.in (target_libs):  Include libstdc++ again.
12874 	* Makefile.in (DEVO_SUPPORT): Include configure.bat and
12889 	* configure.in (target_libs):  Remove libstdc++ for libg++-2.6.1.
12892 	* configure.in:  Match on i?86-ncr-sysv4.3, not i?86-ncr-sysv43.
12896 	* configure: Since the "trap 0" handler will override the exit
12910 	* configure.in: Don't build emacs on Irix 5.
12914 	* configure.in (*-*-netware*): Add libio.
12933 	* configure.in (target_libs): Add libstdc++.
12942 	* configure: Use ${config_shell} when running ${configsub}.
12976 	* configure.in (arm-*-*): Don't configure ld for this target.
12980 	* configure.in (*-*-netware): don't configure libg++, libio,
12985 	* configure.in (alpha-dec-osf*): Use osf*, not osf1*.  Don't
12986 	configure ld--it works, but it doesn't support shared libraries.
13041 	* configure: Accept and ignore --cache*, for compatibility with
13077 	* configure.in: Recognize --with-headers, --with-libs, and
13083 	* configure.in: Change i[34]86 to i[345]86.
13087 	* configure (version): A few more tweaks to help message.
13096 	* configure: Fix up help message; from karl@owl.hq.ileaf.com
13101 	* configure.in:  Also configure librx.
13114 	* configure.in: Configure the examples directory.
13118 	* configure: Simplify Jun 2 1994 change.
13134 	* configure.in: Warn about use of /usr/ucb/cc on Solaris.  From
13143 	* configure:  Search current dir first in .gdbinit.
13161 	* configure.in: Use mh-cxux for m88k-harris-cxux*.
13189 	* configure: Check ${exec_prefixoption}, not ${exec_prefix}, to
13207 	* configure: Remove temporary files on receipt of a signal.
13211 	* configure: If there is a package_makefile_frag, remove
13227 	* configure.in:  Use mh-ncrsvr43.  Patch from
13237 	* configure: Set program_transform_nameoption correctly.
13246 	* configure: If config.guess result is a prefix of the user
13249 	* configure.in: Remove SunOS patch suffix removal hack.
13257 	* configure: Delete SunOs patch suffix from host_canonical
13259 	* configure.in: Add comments for easier maintenance.
13281 	* configure.in: To here, at Ian's suggestion.  The top-
13296 	* configure.in: Use ld for i[34]86-*-sysv4* and sparc-*-solaris2*.
13304 	* configure.in (go32): Don't build libg++ or libio.
13313 	* configure.in (target==go32): Don't build gdb.
13318 	* configure.in (host==go32): Configure dosrel too.
13330 	* configure.in (appdirs): New variable.  Currently empty, but will
13350 	* configure.in (mips*-dec-bsd*): New target; do build linker.
13355 	* configure.in: support rs6000-*-lynxos* configuration.
13363 	* configure.in (i[34]86-*-sco*): Move to be with other i386
13371 	* configure.in: Only set host_makefile_frag if config
13385 	* configure.in (*-*-lynxos*): Don't configure newlib for either
13400 	* configure: Make file links cleanly even if Lynx fails on
13410 	* configure: Unknown options are fatal again.
13414 	* configure: Ignore --x-includes and --x-libraries, for Autoconf
13424 	* configure.in:  Add mips-*-sysv4* support.
13434 	* configure: Support --silent, --quiet.
13438 	* configure: Support --disable-FEATURE.
13451 	* configure.in (powerpc-*-aix*): Treat like rs6000-*-*.
13455 	* configure: Make unrecognized options give nonfatal warnings
13462 	* configure: Add --enable-* options.  Clean up usage message and
13471 	* configure.in (hppa*-*-*): Enable binutils.
13504 	* configure.in (noconfigdirs for alpha): Remove libg++ and libio.
13520 	* configure: If subdir configure fails, print out a message with
13521 	subdirectory name, in case subdir's configure code didn't identify
13526 	* configure.in: Remove embedded newlines from configdirs.
13536 	* configure.in (alpha-dec-osf1*, alpha*-*-*): Build gas.
13540 	* configure.in (hppa*-*-osf*): Treat this just like most other
13550 	* configure.in (rs6000-*-*): Build gas.
13567 	* configure (while loop): Don't use "break 2" inside case
13581 	* configure:  Completely rewrite option processing.  Take
13593 	* configure.in: Don't issue warnings about directories which are
13598 	* configure.in: Don't build gas for alpha-dec-osf1*.
13602 	* configure:  Back out Per's change of 12/19/1993.  It changes the
13603 	behavior of configure in unexpected and confusing ways.
13610 	* configure.in, config.sub: Add support for VSTa micro-kernel.
13614 	* configure.in: Nuke hacks which were used to get a special
13619 	* configure:  If only ${target_alias} is given, use that
13621 	* configure:  Add missing back-slashes before nested quotes.
13638 	* configure.in: Don't try to configure newlib for Alpha.
13642 	* configure.in: Don't build ld for Irix 5.  Don't build gas,
13645 	* configure.in (mips*-sgi-irix5*): New target; use mh-irix5.
13654 	* configure.in (notsupp): ensure that a space is always at the end
13659 	* configure.in (target i386-sysv4.2): don't build ld, since static
13665 	* configure.in: Don't configure ld, binutils, or gprof for Apollo.
13727 	* configure.in (hppa target): check the source directory for the
13736 	* configure.in: Don't build ld on i386-solaris2, same as for
13745 	* configure.in:  Configure gdb for alpha.
13757 	* configure.in: Produce warning message for subdirectories not
13759 	configure gdb for vms.
13774 	* configure.in: Add * to end of all OS names.
13778 	* configure.in: Build newlib for LynxOS native.
13784 	* configure.in: Add comment about HP compiler vs. emacs.
13788 	* configure.in: don't build ld on solaris2 (not a viable option
13793 	* configure.in: Accept alpha-dec-osf1*, not just -osf1, since
13798 	* configure.in: Build linker and binutils for alpha-dec-osf1.
13807 	* configure.in: recognize mips*- instead of mips-
13820 	* configure.in: Remove alpha-dec-osf*, no longer necessary now that
13825 	* configure.in: Recognize hppa*-*-hiux* (currently synonym for hpux).
13832 	* configure.in: default to '--with-gnu-as' and '--with-gnu-ld'
13840 	* configure: substitute SHELL value in Makefile.in with
13845 	* configure.in: Build gas, ld, and binutils for *-*-sysv4* and
13864 	* configure.in: grab mt-hppa for HPPA targets; use 'gas ' instead
13869 	* configure: grab values for $(CC) and $(CXX) from the
13870 	environment, so that someone can do "CC=gcc configure; make" and
13873 	* configure.in, Makefile.in: add support for gash, the tcl
13891 	* configure.in: Match *-*-solaris2* not *-sun-solaris2*.
13915 	* configure.in: don't build libio for h8[35]00-*-* targets
13949 	* configure.in: use mh-hp300 for 68k HP hosts
13953 	* configure: add support for CONFIG_SHELL, so that you can use
13954 	some alternate shell for evaluating configure scripts
13959 	in configure script to bug-gdb@prep.ai.mit.edu when building
13986 	* configure: if ${newsrcdir}/configure doesn't exist, don't assume
13987 	that ${newsrcdir}/configure.in does.
13999 	* Makefile.in (Makefile): depend on configure.in.  Also drop the
14006 	* configure.in: Handle h8300h too.
14014 	* configure:  Remove extraneous output when guessing host type.
14022 	* configure: remove CROSS=-DCROSS_COMPILE and ALL=all.cross
14027 	* configure.in (target sh): Build gprof.
14035 	* configure.in: Use config/mh-riscos for mips-*-sysv*.
14039 	* configure: Correct error message for missing Makefile.in to
14066 	* Makefile.in (taz):  Replace 'configure -rm' by 'make distclean'.
14080 	* configure: put quotes around the final value of program_transform_name
14088 	* configure.in: Build diff for crosses, but not for go32 host.
14090 	* configure.in: Build gprof only for native, and don't build it
14095 	* configure.in: don't build gas,ld,binutils on for *-*-sysv4
14099 	* configure.in (host_tools): Add prms.
14174 	* configure.in: fix Alpha GDB typo; also, don't build DejaGnu for
14179 	* configure: change  so "-exec-prefix" gets passed down rather
14197 	* configure.in: actually use the Sun3 makefile fragment that's in
14206 	* configure.in: remove some program from Alpha targetted toolchains
14238 	* Makefile.in (make-gdb.tar.Z):  Add configure, config.guess,
14254 	* configure: Change help message to prefer --options rather than
14275 	* configure (tooldir): Fix for i386-aix again.
14279 	* configure, Makefile.in:  Change definition of $(tooldir)
14311 	* configure.in: Do configure ld/binutils/gas for it.
14315 	* configure (tooldir): Alter syntax used to set this, for systems
14320 	* configure: Pass program-transform-name, not
14334 	* configure.in: rename m88k-motorola-m88kbcs to m88k-motorola-sysv
14347 	* configure.in: add comment for --with-x default values
14357 	* configure.in: Removed obsolete references to bfd_target and
14362 	* test-build.mk: Really don't pass host to configure.
14367 	* configure: Handle an empty program-prefix, program-suffix or
14373 	* test-build.mk: Don't pass host argument to configure; make it
14395 	pass to configure.  Set to -with-gnu-as on mips-dec-ultrix.
14403 	* configure.in: Build gas for mips-*-*.
14436 	* configure: Actually implement the change zoo just documented.
14440 	* configure: when using config.guess, only set target_alias when
14449 	* configure: add support for package_makefile_fragment, handle the
14450 	case where a directory has a configure.in file but no Makefile.in
14458 	* configure: Must use both --host and --target in recursive calls.
14466 	* configure.in (h8300-*-*, h8500-*-*): Don't build libg++.
14470 	* configure.in: canonicalize all instances to *-*-solaris2*,
14477 	* Makefile.in, config.guess, config.sub, configure: bump
14492 	* configure.in: configure tclX too; don't remove Tk on RS/6000 anymore
14501 	* configure.in: Use config/mh-aix386 file for it.
14515 	* configure.in: Put back mips-dec-bsd* case.
14520 	* configure.in (vax-*-ultrix2*):  Add Ultrix 2.2 triplet.
14525 	* configure.in: remove no-op mips-dec-bsd* in "case $target"
14533 	* configure.in: For vms target, skip bfd, ld, binutils.  Do build
14538 	* configure (makesrcdir): If ${srcdir} is relative and not ".",
14543 	* configure.in: Added "dejagnu" to hosttools list.
14547 	* config.sub, configure.in, config.guess:  Add support
14560 	allow them to configure, build, and execute properly will be made
14566 	* configure.in: Likewise.
14589 	* configure.in, Makefile.in: add hello, tar, gzip, recode, indent
14649 	* configure: Include srcdir in message about target of link not
14655 	* configure.in: add uudecode to host_tools
14664 	* configure.in (mips-*-*): Build ld and binutils.
14668 	* configure: check return code from mkdir, print error message and
14685 	* configure: source directory missing is no longer a warning
14687 	* configure.in: recognize irix[34]* instead of irix[34]
14695 	* configure.in, Makefile.in:  Update accordingly.
14708 	* configure:  Call guess-systype if no host is specified.
14728 	  set exclusively by configure, using configure.in .
14745 	* configure: Accept -with arguments.
14766 	* configure.in (i[34]86-*-isc*): added; uses mh-sysv.
14770 	* configure.in: don't remove binutils from Solaris builds
14792 	* configure.in: split the configdirs list into 4 categories (native
14798 	* configure.in (hppa*-*-*):  Don't remove bfd and gdb from
14810 	* configure.in: handle some programs as cross-only, and others as
14819 	* configure.in: add m4, textutils, fileutils, sed, shellutils,
14823 	added to configure.in
14827 	* configure.in: use mh-sun for all *-sun-* hosts
14838 	* configure.in: start building libg++ for HP-UX targets
14847 	* configure.in (i[34]86-*-solaris2*):  Use config/mh-sysv4.
14851 	* configure: accept dash as well as underscore in long option
14860 	* configure.in: expand the section that adds or removes
14881 	* configure.in: remove most references to gdbtest, regularize
14890 	* configure.in: handle those directories if they exist
14933 	* configure: also define $(host_canonical) and
14943 	* configure.in (configdirs):  Add deja-gnu.
14947 	* README:  Update for configure.texi and gdb-4.7 release.
14987 	* configure.in: use *-*-* instead of nested cases for host and target
15002 	* configure: only set PWD if it is already set.
15006 	* configure: just set PWD=`pwd` at the top, since Ultrix sh
15013 	* configure: always set $(tooldir) to $(libdir)/$(target_alias),
15021 	(DEVO_SUPPORT):  Add configure.texi.
15029 	* configure.in, config.sub: added new target m68010-adobe-scout,
15030 	with alias of adobe68k.  Changed configure.in to check for
15061 	* configure: added -program_transform_name option, used as
15063 	configure.texi: added documentation for -program_prefix,
15076 	* config.sub, configure.in: accept OSE68000 and OSE68k.
15090 	* configure.texi, standards.texi: fix INFO-DIR-ENTRY
15103 	* configure.in: grab the HPUX makefile fragment if on HPUX
15108 	 configure.in: recognise m68{k,000}-ericsson-OSE.
15113 	* configure.in: rearrange the parts that remove programs from
15126 	* Makefile.in, configure.in: add tgas
15132 	* configure.in: add libm.
15142 	* configure: Add program_suffix (parallel to program_prefix)
15147 	* configure:  Minor $subdir-related fixes.
15151 	* configure: fix various problems with propogating
15153 	* configure.in: config libgcc if its there
15181 	* configure.texi: fix doc for the -nfp option to configure
15191 	* configure.in: added solaris* host_makefile_frag hook.
15209 	* configure:  If host_makefile_frag is absolute, don't
15210 	prefix ${invsubdir} (relevant to libg++ auto-configure).
15223 	* configure: do not bury `pwd` into config.status, thus do fewer
15226 	* configure: print the "Building in" message only when building in
15229 	* configure: remove -s, rework -v to better accomodate guested
15241 	* configure: get makesrcdir right for subdirs deeper than 1.
15260 	* configure: test for and move config.status pieces from
15265 	* configure:  Test for existance of files before trying to mv
15270 	* configure: correct final line of config.status.
15272 	* configure: patch from eggert.  Avoids a protection problem if
15275 	* configure: use move-if-change from gcc to create config.status.
15281 	* configure: test for config.sub with "config.sub sun4" rather
15292 	* configure: mkdir ${subdir} as needed.
15296 	* Makefile.in,configure.in: added autoconf.
15305 	* configure: correct makesrcdir when subdir is .
15309 	* configure:  Add support for 'subdirs' variable, which is
15310 	like 'configdirs', except that configure doesn't re-invoke
15312 	* configure.texi:  Document subdirs.
15316 	* configure.in: added flex to configdirs
15324 	* configure.in:  Add gdbtest to configdirs.
15330 	* configure.in:  Recognize new ncr3000 config.
15334 	* Makefile.in, configure.in: removed references to gdbm.
15344 	* configure.in:  sco is an os, not a vendor!
15346 	* configure:  Quote $( better.  Keep various shells happy.
15363 	* configure: re-add -rm.
15369 	* configure.in: remove gas from rs6000 build, use aix host fragment.
15373 	* configure: pass down site_option during recursion.
15381 	* configure: Change exec_prefix so that it really defaults to prefix.
15385 	* Makefile.in, configure.in:  Add support for mmalloc library.
15393 	* configure: adjusted error message on objdir/srcdir configure
15406 	* configure: added test for conflicting configuration in srcdir,
15408 	  gets cranky.  use relative paths for configure and srcdir
15422 	* configure.texi: fixed a node pointer problem.
15426 	* config.sub configure.in gdb/configure.in
15429 	gdb/config/mh-irix4 texinfo/configure.in:  Port to SGI Irix-4.x.
15433 	* configure: -recurring becomes -silent.  corrected help message
15440 	* configure: when building Makefile for crosses, replace
15451 	* Makefile.in, configure.in: removed traces of namesubdir,
15455 	* configure.texi: remove most references to multiple hosts,
15458 	* configure.man: removed rcsid. reference config.sub not
15465 	* configure.texi:  Explain better about .gdbinit and about
15466 	the environment that configure.in sections run in.
15470 	* configure.in:  Ultrix is only a decstation if it's a MIPS.
15474 	* README:  DOC.configure => cfg-paper.texi.
15487 	* bfd/configure.in, gdb/config/mh-i386sco,
15488 	gdb/config/mt-i386v32, gdb/configure.in, readline/configure.in:
15499 	* configure:  Change -x to -f to keep Ultrix /bin/test happy.
15512 	* Makefile.in (DEV_SUPPORT):  add configure.man.
15519 	(DEVO_SUPPORT):  DOC.configure => cfg-paper.texi.
15527 	* configure.in:  Add libg++.
15528 	* configure:  When verbose, don't output the command line at each
15534 	* configure.in, Makefile.in: fix clean-info, add flex.  add
15537 	* configure: be less sensitive to spaces in Makefile.in.  Do not
15539 	  might have their own configure.  If a subdir has it's own
15540 	  configure script, use it.
15554 	* configure.in:  Changed svr4 references to sysv4.
15558 	* configure: added -V for version number option.
15562 	* DOC.configure, cfg-paper.texi: revised, updated, and texinfo'd.
15563 	  renamed from DOC.configure to cfg-paper.texi.
15567 	* configure, config.subr, config.sub: config.subr is now
15572 	* configure.texi: new file, in progress.
15575 	  configure.
15577 	* configure.man: new file, first cut.
15579 	* configure: find config.subr again now that configuration "none"
15587 	* configure, config.sub, config.subr: merge config.sub into
15595 	* configure.in: add decstation host makefile frag.
15608 	* configure: \{1,2\} appears to be a sysv'ism.  Use a different
15617 	* configure: added PWD as a stand in for `pwd` (for speed). use
15623 	* configure: +options become --options.  -subdirs commented out.