/******************************************************************************
*
* Copyright 1999-2012 Broadcom Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
/******************************************************************************
*
* This file contains the L2CAP API code
*
******************************************************************************/
#define LOG_TAG "bt_l2cap"
#include
#include
#include
#include
#include
#include "bt_common.h"
#include "bt_types.h"
#include "btm_api.h"
#include "btu.h"
#include "device/include/controller.h"
#include "hcidefs.h"
#include "hcimsgs.h"
#include "l2c_int.h"
#include "l2cdefs.h"
#include "osi/include/allocator.h"
#include "osi/include/log.h"
using base::StringPrintf;
/*******************************************************************************
*
* Function L2CA_Register
*
* Description Other layers call this function to register for L2CAP
* services.
*
* Returns PSM to use or zero if error. Typically, the PSM returned
* is the same as was passed in, but for an outgoing-only
* connection to a dynamic PSM, a "virtual" PSM is returned
* and should be used in the calls to L2CA_ConnectReq(),
* L2CA_ErtmConnectReq() and L2CA_Deregister()
*
******************************************************************************/
uint16_t L2CA_Register(uint16_t psm, tL2CAP_APPL_INFO* p_cb_info) {
tL2C_RCB* p_rcb;
uint16_t vpsm = psm;
L2CAP_TRACE_API("L2CAP - L2CA_Register() called for PSM: 0x%04x", psm);
/* Verify that the required callback info has been filled in
** Note: Connection callbacks are required but not checked
** for here because it is possible to be only a client
** or only a server.
*/
if ((!p_cb_info->pL2CA_ConfigCfm_Cb) || (!p_cb_info->pL2CA_ConfigInd_Cb) ||
(!p_cb_info->pL2CA_DataInd_Cb) || (!p_cb_info->pL2CA_DisconnectInd_Cb)) {
L2CAP_TRACE_ERROR("L2CAP - no cb registering PSM: 0x%04x", psm);
return (0);
}
/* Verify PSM is valid */
if (L2C_INVALID_PSM(psm)) {
L2CAP_TRACE_ERROR("L2CAP - invalid PSM value, PSM: 0x%04x", psm);
return (0);
}
/* Check if this is a registration for an outgoing-only connection to */
/* a dynamic PSM. If so, allocate a "virtual" PSM for the app to use. */
if ((psm >= 0x1001) && (p_cb_info->pL2CA_ConnectInd_Cb == NULL)) {
for (vpsm = 0x1002; vpsm < 0x8000; vpsm += 2) {
p_rcb = l2cu_find_rcb_by_psm(vpsm);
if (p_rcb == NULL) break;
}
L2CAP_TRACE_API("L2CA_Register - Real PSM: 0x%04x Virtual PSM: 0x%04x",
psm, vpsm);
}
/* If registration block already there, just overwrite it */
p_rcb = l2cu_find_rcb_by_psm(vpsm);
if (p_rcb == NULL) {
p_rcb = l2cu_allocate_rcb(vpsm);
if (p_rcb == NULL) {
L2CAP_TRACE_WARNING("L2CAP - no RCB available, PSM: 0x%04x vPSM: 0x%04x",
psm, vpsm);
return (0);
}
}
p_rcb->api = *p_cb_info;
p_rcb->real_psm = psm;
return (vpsm);
}
/*******************************************************************************
*
* Function L2CA_Deregister
*
* Description Other layers call this function to de-register for L2CAP
* services.
*
* Returns void
*
******************************************************************************/
void L2CA_Deregister(uint16_t psm) {
tL2C_RCB* p_rcb;
tL2C_CCB* p_ccb;
tL2C_LCB* p_lcb;
int ii;
L2CAP_TRACE_API("L2CAP - L2CA_Deregister() called for PSM: 0x%04x", psm);
p_rcb = l2cu_find_rcb_by_psm(psm);
if (p_rcb != NULL) {
p_lcb = &l2cb.lcb_pool[0];
for (ii = 0; ii < MAX_L2CAP_LINKS; ii++, p_lcb++) {
if (p_lcb->in_use) {
p_ccb = p_lcb->ccb_queue.p_first_ccb;
if ((p_ccb == NULL) || (p_lcb->link_state == LST_DISCONNECTING)) {
continue;
}
if ((p_ccb->in_use) &&
((p_ccb->chnl_state == CST_W4_L2CAP_DISCONNECT_RSP) ||
(p_ccb->chnl_state == CST_W4_L2CA_DISCONNECT_RSP))) {
continue;
}
if (p_ccb->p_rcb == p_rcb) {
l2c_csm_execute(p_ccb, L2CEVT_L2CA_DISCONNECT_REQ, NULL);
}
}
}
l2cu_release_rcb(p_rcb);
} else {
L2CAP_TRACE_WARNING("L2CAP - PSM: 0x%04x not found for deregistration",
psm);
}
}
/*******************************************************************************
*
* Function L2CA_AllocatePSM
*
* Description Other layers call this function to find an unused PSM for
* L2CAP services.
*
* Returns PSM to use.
*
******************************************************************************/
uint16_t L2CA_AllocatePSM(void) {
bool done = false;
uint16_t psm = l2cb.dyn_psm;
L2CAP_TRACE_API("L2CA_AllocatePSM");
while (!done) {
psm += 2;
if (psm > 0xfeff) {
psm = 0x1001;
} else if (psm & 0x0100) {
/* the upper byte must be even */
psm += 0x0100;
}
/* if psm is in range of reserved BRCM Aware features */
if ((BRCM_RESERVED_PSM_START <= psm) && (psm <= BRCM_RESERVED_PSM_END))
continue;
/* make sure the newlly allocated psm is not used right now */
if ((l2cu_find_rcb_by_psm(psm)) == NULL) done = true;
}
l2cb.dyn_psm = psm;
return (psm);
}
/*******************************************************************************
*
* Function L2CA_AllocateLePSM
*
* Description To find an unused LE PSM for L2CAP services.
*
* Returns LE_PSM to use if success. Otherwise returns 0.
*
******************************************************************************/
uint16_t L2CA_AllocateLePSM(void) {
bool done = false;
uint16_t psm = l2cb.le_dyn_psm;
uint16_t count = 0;
L2CAP_TRACE_API("%s: last psm=%d", __func__, psm);
while (!done) {
count++;
if (count > LE_DYNAMIC_PSM_RANGE) {
L2CAP_TRACE_ERROR("%s: Out of free BLE PSM", __func__);
return 0;
}
psm++;
if (psm > LE_DYNAMIC_PSM_END) {
psm = LE_DYNAMIC_PSM_START;
}
if (!l2cb.le_dyn_psm_assigned[psm - LE_DYNAMIC_PSM_START]) {
/* make sure the newly allocated psm is not used right now */
if (l2cu_find_ble_rcb_by_psm(psm)) {
L2CAP_TRACE_WARNING("%s: supposedly-free PSM=%d have allocated rcb!",
__func__, psm);
continue;
}
l2cb.le_dyn_psm_assigned[psm - LE_DYNAMIC_PSM_START] = true;
L2CAP_TRACE_DEBUG("%s: assigned PSM=%d", __func__, psm);
done = true;
break;
}
}
l2cb.le_dyn_psm = psm;
return (psm);
}
/*******************************************************************************
*
* Function L2CA_FreeLePSM
*
* Description Free an assigned LE PSM.
*
* Returns void
*
******************************************************************************/
void L2CA_FreeLePSM(uint16_t psm) {
L2CAP_TRACE_API("%s: to free psm=%d", __func__, psm);
if ((psm < LE_DYNAMIC_PSM_START) || (psm > LE_DYNAMIC_PSM_END)) {
L2CAP_TRACE_ERROR("%s: Invalid PSM=%d value!", __func__, psm);
return;
}
if (!l2cb.le_dyn_psm_assigned[psm - LE_DYNAMIC_PSM_START]) {
L2CAP_TRACE_WARNING("%s: PSM=%d was not allocated!", __func__, psm);
}
l2cb.le_dyn_psm_assigned[psm - LE_DYNAMIC_PSM_START] = false;
}
/*******************************************************************************
*
* Function L2CA_ConnectReq
*
* Description Higher layers call this function to create an L2CAP
* connection. Note that the connection is not established at
* this time, but connection establishment gets started. The
* callback function will be invoked when connection
* establishes or fails.
*
* Returns the CID of the connection, or 0 if it failed to start
*
******************************************************************************/
uint16_t L2CA_ConnectReq(uint16_t psm, const RawAddress& p_bd_addr) {
return L2CA_ErtmConnectReq(psm, p_bd_addr, NULL);
}
/*******************************************************************************
*
* Function L2CA_ErtmConnectReq
*
* Description Higher layers call this function to create an L2CAP
* connection. Note that the connection is not established at
* this time, but connection establishment gets started. The
* callback function will be invoked when connection
* establishes or fails.
*
* Parameters: PSM: L2CAP PSM for the connection
* BD address of the peer
* Enhaced retransmission mode configurations
* Returns the CID of the connection, or 0 if it failed to start
*
******************************************************************************/
uint16_t L2CA_ErtmConnectReq(uint16_t psm, const RawAddress& p_bd_addr,
tL2CAP_ERTM_INFO* p_ertm_info) {
tL2C_LCB* p_lcb;
tL2C_CCB* p_ccb;
tL2C_RCB* p_rcb;
VLOG(1) << __func__ << "BDA " << p_bd_addr
<< StringPrintf(" PSM: 0x%04x allowed:0x%x preferred:%d", psm,
(p_ertm_info) ? p_ertm_info->allowed_modes : 0,
(p_ertm_info) ? p_ertm_info->preferred_mode : 0);
/* Fail if we have not established communications with the controller */
if (!BTM_IsDeviceUp()) {
L2CAP_TRACE_WARNING("L2CAP connect req - BTU not ready");
return (0);
}
/* Fail if the PSM is not registered */
p_rcb = l2cu_find_rcb_by_psm(psm);
if (p_rcb == NULL) {
L2CAP_TRACE_WARNING("L2CAP - no RCB for L2CA_conn_req, PSM: 0x%04x", psm);
return (0);
}
/* First, see if we already have a link to the remote */
/* assume all ERTM l2cap connection is going over BR/EDR for now */
p_lcb = l2cu_find_lcb_by_bd_addr(p_bd_addr, BT_TRANSPORT_BR_EDR);
if (p_lcb == NULL) {
/* No link. Get an LCB and start link establishment */
p_lcb = l2cu_allocate_lcb(p_bd_addr, false, BT_TRANSPORT_BR_EDR);
/* currently use BR/EDR for ERTM mode l2cap connection */
if ((p_lcb == NULL) || (!l2cu_create_conn(p_lcb, BT_TRANSPORT_BR_EDR))) {
L2CAP_TRACE_WARNING(
"L2CAP - conn not started for PSM: 0x%04x p_lcb: 0x%08x", psm,
p_lcb);
return (0);
}
}
/* Allocate a channel control block */
p_ccb = l2cu_allocate_ccb(p_lcb, 0);
if (p_ccb == NULL) {
L2CAP_TRACE_WARNING("L2CAP - no CCB for L2CA_conn_req, PSM: 0x%04x", psm);
return (0);
}
/* Save registration info */
p_ccb->p_rcb = p_rcb;
if (p_ertm_info) {
p_ccb->ertm_info = *p_ertm_info;
/* Replace default indicators with the actual default pool */
if (p_ccb->ertm_info.fcr_rx_buf_size == L2CAP_INVALID_ERM_BUF_SIZE)
p_ccb->ertm_info.fcr_rx_buf_size = L2CAP_FCR_RX_BUF_SIZE;
if (p_ccb->ertm_info.fcr_tx_buf_size == L2CAP_INVALID_ERM_BUF_SIZE)
p_ccb->ertm_info.fcr_tx_buf_size = L2CAP_FCR_TX_BUF_SIZE;
if (p_ccb->ertm_info.user_rx_buf_size == L2CAP_INVALID_ERM_BUF_SIZE)
p_ccb->ertm_info.user_rx_buf_size = L2CAP_USER_RX_BUF_SIZE;
if (p_ccb->ertm_info.user_tx_buf_size == L2CAP_INVALID_ERM_BUF_SIZE)
p_ccb->ertm_info.user_tx_buf_size = L2CAP_USER_TX_BUF_SIZE;
p_ccb->max_rx_mtu =
p_ertm_info->user_rx_buf_size -
(L2CAP_MIN_OFFSET + L2CAP_SDU_LEN_OFFSET + L2CAP_FCS_LEN);
}
/* If link is up, start the L2CAP connection */
if (p_lcb->link_state == LST_CONNECTED) {
l2c_csm_execute(p_ccb, L2CEVT_L2CA_CONNECT_REQ, NULL);
}
/* If link is disconnecting, save link info to retry after disconnect
* Possible Race condition when a reconnect occurs
* on the channel during a disconnect of link. This
* ccb will be automatically retried after link disconnect
* arrives
*/
else if (p_lcb->link_state == LST_DISCONNECTING) {
L2CAP_TRACE_DEBUG("L2CAP API - link disconnecting: RETRY LATER");
/* Save ccb so it can be started after disconnect is finished */
p_lcb->p_pending_ccb = p_ccb;
}
L2CAP_TRACE_API("L2CAP - L2CA_conn_req(psm: 0x%04x) returned CID: 0x%04x",
psm, p_ccb->local_cid);
/* Return the local CID as our handle */
return (p_ccb->local_cid);
}
/*******************************************************************************
*
* Function L2CA_RegisterLECoc
*
* Description Other layers call this function to register for L2CAP
* Connection Oriented Channel.
*
* Returns PSM to use or zero if error. Typically, the PSM returned
* is the same as was passed in, but for an outgoing-only
* connection to a dynamic PSM, a "virtual" PSM is returned
* and should be used in the calls to L2CA_ConnectLECocReq()
* and L2CA_DeregisterLECoc()
*
******************************************************************************/
uint16_t L2CA_RegisterLECoc(uint16_t psm, tL2CAP_APPL_INFO* p_cb_info) {
L2CAP_TRACE_API("%s called for LE PSM: 0x%04x", __func__, psm);
/* Verify that the required callback info has been filled in
** Note: Connection callbacks are required but not checked
** for here because it is possible to be only a client
** or only a server.
*/
if ((!p_cb_info->pL2CA_DataInd_Cb) || (!p_cb_info->pL2CA_DisconnectInd_Cb)) {
L2CAP_TRACE_ERROR("%s No cb registering BLE PSM: 0x%04x", __func__, psm);
return 0;
}
/* Verify PSM is valid */
if (!L2C_IS_VALID_LE_PSM(psm)) {
L2CAP_TRACE_ERROR("%s Invalid BLE PSM value, PSM: 0x%04x", __func__, psm);
return 0;
}
tL2C_RCB* p_rcb;
uint16_t vpsm = psm;
/* Check if this is a registration for an outgoing-only connection to */
/* a dynamic PSM. If so, allocate a "virtual" PSM for the app to use. */
if ((psm >= LE_DYNAMIC_PSM_START) &&
(p_cb_info->pL2CA_ConnectInd_Cb == NULL)) {
vpsm = L2CA_AllocateLePSM();
if (vpsm == 0) {
L2CAP_TRACE_ERROR("%s: Out of free BLE PSM", __func__);
return 0;
}
L2CAP_TRACE_API("%s Real PSM: 0x%04x Virtual PSM: 0x%04x", __func__, psm,
vpsm);
}
/* If registration block already there, just overwrite it */
p_rcb = l2cu_find_ble_rcb_by_psm(vpsm);
if (p_rcb == NULL) {
L2CAP_TRACE_API("%s Allocate rcp for Virtual PSM: 0x%04x", __func__, vpsm);
p_rcb = l2cu_allocate_ble_rcb(vpsm);
if (p_rcb == NULL) {
L2CAP_TRACE_WARNING("%s No BLE RCB available, PSM: 0x%04x vPSM: 0x%04x",
__func__, psm, vpsm);
return 0;
}
}
p_rcb->api = *p_cb_info;
p_rcb->real_psm = psm;
return vpsm;
}
/*******************************************************************************
*
* Function L2CA_DeregisterLECoc
*
* Description Other layers call this function to de-register for L2CAP
* Connection Oriented Channel.
*
* Returns void
*
******************************************************************************/
void L2CA_DeregisterLECoc(uint16_t psm) {
L2CAP_TRACE_API("%s called for PSM: 0x%04x", __func__, psm);
tL2C_RCB* p_rcb = l2cu_find_ble_rcb_by_psm(psm);
if (p_rcb == NULL) {
L2CAP_TRACE_WARNING("%s PSM: 0x%04x not found for deregistration", __func__,
psm);
return;
}
tL2C_LCB* p_lcb = &l2cb.lcb_pool[0];
for (int i = 0; i < MAX_L2CAP_LINKS; i++, p_lcb++) {
if (!p_lcb->in_use || p_lcb->transport != BT_TRANSPORT_LE) continue;
tL2C_CCB* p_ccb = p_lcb->ccb_queue.p_first_ccb;
if ((p_ccb == NULL) || (p_lcb->link_state == LST_DISCONNECTING)) continue;
if (p_ccb->in_use && (p_ccb->chnl_state == CST_W4_L2CAP_DISCONNECT_RSP ||
p_ccb->chnl_state == CST_W4_L2CA_DISCONNECT_RSP))
continue;
if (p_ccb->p_rcb == p_rcb)
l2c_csm_execute(p_ccb, L2CEVT_L2CA_DISCONNECT_REQ, NULL);
}
l2cu_release_ble_rcb(p_rcb);
}
/*******************************************************************************
*
* Function L2CA_ConnectLECocReq
*
* Description Higher layers call this function to create an L2CAP
* connection. Note that the connection is not established at
* this time, but connection establishment gets started. The
* callback function will be invoked when connection
* establishes or fails.
*
* Parameters: PSM: L2CAP PSM for the connection
* BD address of the peer
* Local Coc configurations
* Returns the CID of the connection, or 0 if it failed to start
*
******************************************************************************/
uint16_t L2CA_ConnectLECocReq(uint16_t psm, const RawAddress& p_bd_addr,
tL2CAP_LE_CFG_INFO* p_cfg) {
VLOG(1) << __func__ << " BDA: " << p_bd_addr
<< StringPrintf(" PSM: 0x%04x", psm);
/* Fail if we have not established communications with the controller */
if (!BTM_IsDeviceUp()) {
L2CAP_TRACE_WARNING("%s BTU not ready", __func__);
return 0;
}
/* Fail if the PSM is not registered */
tL2C_RCB* p_rcb = l2cu_find_ble_rcb_by_psm(psm);
if (p_rcb == NULL) {
L2CAP_TRACE_WARNING("%s No BLE RCB, PSM: 0x%04x", __func__, psm);
return 0;
}
/* First, see if we already have a le link to the remote */
tL2C_LCB* p_lcb = l2cu_find_lcb_by_bd_addr(p_bd_addr, BT_TRANSPORT_LE);
if (p_lcb == NULL) {
/* No link. Get an LCB and start link establishment */
p_lcb = l2cu_allocate_lcb(p_bd_addr, false, BT_TRANSPORT_LE);
if ((p_lcb == NULL)
/* currently use BR/EDR for ERTM mode l2cap connection */
|| (!l2cu_create_conn(p_lcb, BT_TRANSPORT_LE))) {
L2CAP_TRACE_WARNING("%s conn not started for PSM: 0x%04x p_lcb: 0x%08x",
__func__, psm, p_lcb);
return 0;
}
}
/* Allocate a channel control block */
tL2C_CCB* p_ccb = l2cu_allocate_ccb(p_lcb, 0);
if (p_ccb == NULL) {
L2CAP_TRACE_WARNING("%s no CCB, PSM: 0x%04x", __func__, psm);
return 0;
}
/* Save registration info */
p_ccb->p_rcb = p_rcb;
/* Save the configuration */
if (p_cfg) {
memcpy(&p_ccb->local_conn_cfg, p_cfg, sizeof(tL2CAP_LE_CFG_INFO));
p_ccb->remote_credit_count = p_cfg->credits;
}
/* If link is up, start the L2CAP connection */
if (p_lcb->link_state == LST_CONNECTED) {
if (p_ccb->p_lcb->transport == BT_TRANSPORT_LE) {
L2CAP_TRACE_DEBUG("%s LE Link is up", __func__);
l2c_csm_execute(p_ccb, L2CEVT_L2CA_CONNECT_REQ, NULL);
}
}
/* If link is disconnecting, save link info to retry after disconnect
* Possible Race condition when a reconnect occurs
* on the channel during a disconnect of link. This
* ccb will be automatically retried after link disconnect
* arrives
*/
else if (p_lcb->link_state == LST_DISCONNECTING) {
L2CAP_TRACE_DEBUG("%s link disconnecting: RETRY LATER", __func__);
/* Save ccb so it can be started after disconnect is finished */
p_lcb->p_pending_ccb = p_ccb;
}
L2CAP_TRACE_API("%s(psm: 0x%04x) returned CID: 0x%04x", __func__, psm,
p_ccb->local_cid);
/* Return the local CID as our handle */
return p_ccb->local_cid;
}
/*******************************************************************************
*
* Function L2CA_ConnectLECocRsp
*
* Description Higher layers call this function to accept an incoming
* L2CAP COC connection, for which they had gotten an connect
* indication callback.
*
* Returns true for success, false for failure
*
******************************************************************************/
bool L2CA_ConnectLECocRsp(const RawAddress& p_bd_addr, uint8_t id,
uint16_t lcid, uint16_t result, uint16_t status,
tL2CAP_LE_CFG_INFO* p_cfg) {
VLOG(1) << __func__ << " BDA: " << p_bd_addr
<< StringPrintf(" CID: 0x%04x Result: %d Status: %d", lcid, result,
status);
/* First, find the link control block */
tL2C_LCB* p_lcb = l2cu_find_lcb_by_bd_addr(p_bd_addr, BT_TRANSPORT_LE);
if (p_lcb == NULL) {
/* No link. Get an LCB and start link establishment */
L2CAP_TRACE_WARNING("%s no LCB", __func__);
return false;
}
/* Now, find the channel control block */
tL2C_CCB* p_ccb = l2cu_find_ccb_by_cid(p_lcb, lcid);
if (p_ccb == NULL) {
L2CAP_TRACE_WARNING("%s no CCB", __func__);
return false;
}
/* The IDs must match */
if (p_ccb->remote_id != id) {
L2CAP_TRACE_WARNING("%s bad id. Expected: %d Got: %d", __func__,
p_ccb->remote_id, id);
return false;
}
if (p_cfg) {
memcpy(&p_ccb->local_conn_cfg, p_cfg, sizeof(tL2CAP_LE_CFG_INFO));
p_ccb->remote_credit_count = p_cfg->credits;
}
if (result == L2CAP_CONN_OK)
l2c_csm_execute(p_ccb, L2CEVT_L2CA_CONNECT_RSP, NULL);
else {
tL2C_CONN_INFO conn_info;
conn_info.bd_addr = p_bd_addr;
conn_info.l2cap_result = result;
conn_info.l2cap_status = status;
l2c_csm_execute(p_ccb, L2CEVT_L2CA_CONNECT_RSP_NEG, &conn_info);
}
return true;
}
/*******************************************************************************
*
* Function L2CA_GetPeerLECocConfig
*
* Description Get a peers configuration for LE Connection Oriented
* Channel.
*
* Parameters: local channel id
* Pointers to peers configuration storage area
*
* Return value: true if peer is connected
*
******************************************************************************/
bool L2CA_GetPeerLECocConfig(uint16_t lcid, tL2CAP_LE_CFG_INFO* peer_cfg) {
L2CAP_TRACE_API("%s CID: 0x%04x", __func__, lcid);
tL2C_CCB* p_ccb = l2cu_find_ccb_by_cid(NULL, lcid);
if (p_ccb == NULL) {
L2CAP_TRACE_ERROR("%s No CCB for CID:0x%04x", __func__, lcid);
return false;
}
if (peer_cfg != NULL)
memcpy(peer_cfg, &p_ccb->peer_conn_cfg, sizeof(tL2CAP_LE_CFG_INFO));
return true;
}
bool L2CA_SetConnectionCallbacks(uint16_t local_cid,
const tL2CAP_APPL_INFO* callbacks) {
CHECK(callbacks != NULL);
CHECK(callbacks->pL2CA_ConnectInd_Cb == NULL);
CHECK(callbacks->pL2CA_ConnectCfm_Cb != NULL);
CHECK(callbacks->pL2CA_ConfigInd_Cb != NULL);
CHECK(callbacks->pL2CA_ConfigCfm_Cb != NULL);
CHECK(callbacks->pL2CA_DisconnectInd_Cb != NULL);
CHECK(callbacks->pL2CA_DisconnectCfm_Cb != NULL);
CHECK(callbacks->pL2CA_CongestionStatus_Cb != NULL);
CHECK(callbacks->pL2CA_DataInd_Cb != NULL);
CHECK(callbacks->pL2CA_TxComplete_Cb != NULL);
tL2C_CCB* channel_control_block = l2cu_find_ccb_by_cid(NULL, local_cid);
if (!channel_control_block) {
LOG_ERROR(LOG_TAG,
"%s no channel control block found for L2CAP LCID=0x%04x.",
__func__, local_cid);
return false;
}
// We're making a connection-specific registration control block so we check
// if we already have a private one allocated to us on the heap. If not, we
// make a new allocation, mark it as heap-allocated, and inherit the fields
// from the old control block.
tL2C_RCB* registration_control_block = channel_control_block->p_rcb;
if (!channel_control_block->should_free_rcb) {
registration_control_block = (tL2C_RCB*)osi_calloc(sizeof(tL2C_RCB));
*registration_control_block = *channel_control_block->p_rcb;
channel_control_block->p_rcb = registration_control_block;
channel_control_block->should_free_rcb = true;
}
registration_control_block->api = *callbacks;
return true;
}
/*******************************************************************************
*
* Function L2CA_ConnectRsp
*
* Description Higher layers call this function to accept an incoming
* L2CAP connection, for which they had gotten an connect
* indication callback.
*
* Returns true for success, false for failure
*
******************************************************************************/
bool L2CA_ConnectRsp(const RawAddress& p_bd_addr, uint8_t id, uint16_t lcid,
uint16_t result, uint16_t status) {
return L2CA_ErtmConnectRsp(p_bd_addr, id, lcid, result, status, NULL);
}
/*******************************************************************************
*
* Function L2CA_ErtmConnectRsp
*
* Description Higher layers call this function to accept an incoming
* L2CAP connection, for which they had gotten an connect
* indication callback.
*
* Returns true for success, false for failure
*
******************************************************************************/
bool L2CA_ErtmConnectRsp(const RawAddress& p_bd_addr, uint8_t id, uint16_t lcid,
uint16_t result, uint16_t status,
tL2CAP_ERTM_INFO* p_ertm_info) {
tL2C_LCB* p_lcb;
tL2C_CCB* p_ccb;
VLOG(1) << __func__ << " BDA: " << p_bd_addr
<< StringPrintf(" CID:0x%04x Result:%d Status:%d", lcid, result,
status);
/* First, find the link control block */
p_lcb = l2cu_find_lcb_by_bd_addr(p_bd_addr, BT_TRANSPORT_BR_EDR);
if (p_lcb == NULL) {
/* No link. Get an LCB and start link establishment */
L2CAP_TRACE_WARNING("L2CAP - no LCB for L2CA_conn_rsp");
return (false);
}
/* Now, find the channel control block */
p_ccb = l2cu_find_ccb_by_cid(p_lcb, lcid);
if (p_ccb == NULL) {
L2CAP_TRACE_WARNING("L2CAP - no CCB for L2CA_conn_rsp");
return (false);
}
/* The IDs must match */
if (p_ccb->remote_id != id) {
L2CAP_TRACE_WARNING("L2CAP - bad id in L2CA_conn_rsp. Exp: %d Got: %d",
p_ccb->remote_id, id);
return (false);
}
if (p_ertm_info) {
p_ccb->ertm_info = *p_ertm_info;
/* Replace default indicators with the actual default pool */
if (p_ccb->ertm_info.fcr_rx_buf_size == L2CAP_INVALID_ERM_BUF_SIZE)
p_ccb->ertm_info.fcr_rx_buf_size = L2CAP_FCR_RX_BUF_SIZE;
if (p_ccb->ertm_info.fcr_tx_buf_size == L2CAP_INVALID_ERM_BUF_SIZE)
p_ccb->ertm_info.fcr_tx_buf_size = L2CAP_FCR_TX_BUF_SIZE;
if (p_ccb->ertm_info.user_rx_buf_size == L2CAP_INVALID_ERM_BUF_SIZE)
p_ccb->ertm_info.user_rx_buf_size = L2CAP_USER_RX_BUF_SIZE;
if (p_ccb->ertm_info.user_tx_buf_size == L2CAP_INVALID_ERM_BUF_SIZE)
p_ccb->ertm_info.user_tx_buf_size = L2CAP_USER_TX_BUF_SIZE;
p_ccb->max_rx_mtu =
p_ertm_info->user_rx_buf_size -
(L2CAP_MIN_OFFSET + L2CAP_SDU_LEN_OFFSET + L2CAP_FCS_LEN);
}
if (result == L2CAP_CONN_OK) {
l2c_csm_execute(p_ccb, L2CEVT_L2CA_CONNECT_RSP, NULL);
} else {
tL2C_CONN_INFO conn_info;
conn_info.l2cap_result = result;
conn_info.l2cap_status = status;
if (result == L2CAP_CONN_PENDING)
l2c_csm_execute(p_ccb, L2CEVT_L2CA_CONNECT_RSP, &conn_info);
else
l2c_csm_execute(p_ccb, L2CEVT_L2CA_CONNECT_RSP_NEG, &conn_info);
}
return (true);
}
/*******************************************************************************
*
* Function L2CA_ConfigReq
*
* Description Higher layers call this function to send configuration.
*
* Note: The FCR options of p_cfg are not used.
*
* Returns true if configuration sent, else false
*
******************************************************************************/
bool L2CA_ConfigReq(uint16_t cid, tL2CAP_CFG_INFO* p_cfg) {
tL2C_CCB* p_ccb;
L2CAP_TRACE_API(
"L2CA_ConfigReq() CID 0x%04x: fcr_present:%d (mode %d) mtu_present:%d "
"(%d)",
cid, p_cfg->fcr_present, p_cfg->fcr.mode, p_cfg->mtu_present, p_cfg->mtu);
/* Find the channel control block. We don't know the link it is on. */
p_ccb = l2cu_find_ccb_by_cid(NULL, cid);
if (p_ccb == NULL) {
L2CAP_TRACE_WARNING("L2CAP - no CCB for L2CA_cfg_req, CID: %d", cid);
return (false);
}
/* We need to have at least one mode type common with the peer */
if (!l2c_fcr_adj_our_req_options(p_ccb, p_cfg)) return (false);
/* Don't adjust FCR options if not used */
if ((!p_cfg->fcr_present) || (p_cfg->fcr.mode == L2CAP_FCR_BASIC_MODE)) {
/* FCR and FCS options are not used in basic mode */
p_cfg->fcs_present = false;
p_cfg->ext_flow_spec_present = false;
if ((p_cfg->mtu_present) && (p_cfg->mtu > L2CAP_MTU_SIZE)) {
L2CAP_TRACE_WARNING("L2CAP - adjust MTU: %u too large", p_cfg->mtu);
p_cfg->mtu = L2CAP_MTU_SIZE;
}
}
/* Save the adjusted configuration in case it needs to be used for
* renegotiation */
p_ccb->our_cfg = *p_cfg;
l2c_csm_execute(p_ccb, L2CEVT_L2CA_CONFIG_REQ, p_cfg);
return (true);
}
/*******************************************************************************
*
* Function L2CA_ConfigRsp
*
* Description Higher layers call this function to send a configuration
* response.
*
* Returns true if configuration response sent, else false
*
******************************************************************************/
bool L2CA_ConfigRsp(uint16_t cid, tL2CAP_CFG_INFO* p_cfg) {
tL2C_CCB* p_ccb;
L2CAP_TRACE_API(
"L2CA_ConfigRsp() CID: 0x%04x Result: %d MTU present:%d Flush TO:%d "
"FCR:%d FCS:%d",
cid, p_cfg->result, p_cfg->mtu_present, p_cfg->flush_to_present,
p_cfg->fcr_present, p_cfg->fcs_present);
/* Find the channel control block. We don't know the link it is on. */
p_ccb = l2cu_find_ccb_by_cid(NULL, cid);
if (p_ccb == NULL) {
L2CAP_TRACE_WARNING("L2CAP - no CCB for L2CA_cfg_rsp, CID: %d", cid);
return (false);
}
if ((p_cfg->result == L2CAP_CFG_OK) || (p_cfg->result == L2CAP_CFG_PENDING))
l2c_csm_execute(p_ccb, L2CEVT_L2CA_CONFIG_RSP, p_cfg);
else {
p_cfg->fcr_present =
false; /* FCR options already negotiated before this point */
/* Clear out any cached options that are being returned as an error
* (excluding FCR) */
if (p_cfg->mtu_present) p_ccb->peer_cfg.mtu_present = false;
if (p_cfg->flush_to_present) p_ccb->peer_cfg.flush_to_present = false;
if (p_cfg->qos_present) p_ccb->peer_cfg.qos_present = false;
l2c_csm_execute(p_ccb, L2CEVT_L2CA_CONFIG_RSP_NEG, p_cfg);
}
return (true);
}
/*******************************************************************************
*
* Function L2CA_DisconnectReq
*
* Description Higher layers call this function to disconnect a channel.
*
* Returns true if disconnect sent, else false
*
******************************************************************************/
bool L2CA_DisconnectReq(uint16_t cid) {
tL2C_CCB* p_ccb;
L2CAP_TRACE_API("L2CA_DisconnectReq() CID: 0x%04x", cid);
/* Find the channel control block. We don't know the link it is on. */
p_ccb = l2cu_find_ccb_by_cid(NULL, cid);
if (p_ccb == NULL) {
L2CAP_TRACE_WARNING("L2CAP - no CCB for L2CA_disc_req, CID: %d", cid);
return (false);
}
l2c_csm_execute(p_ccb, L2CEVT_L2CA_DISCONNECT_REQ, NULL);
return (true);
}
/*******************************************************************************
*
* Function L2CA_DisconnectRsp
*
* Description Higher layers call this function to acknowledge the
* disconnection of a channel.
*
* Returns void
*
******************************************************************************/
bool L2CA_DisconnectRsp(uint16_t cid) {
tL2C_CCB* p_ccb;
L2CAP_TRACE_API("L2CA_DisconnectRsp() CID: 0x%04x", cid);
/* Find the channel control block. We don't know the link it is on. */
p_ccb = l2cu_find_ccb_by_cid(NULL, cid);
if (p_ccb == NULL) {
L2CAP_TRACE_WARNING("L2CAP - no CCB for L2CA_disc_rsp, CID: %d", cid);
return (false);
}
l2c_csm_execute(p_ccb, L2CEVT_L2CA_DISCONNECT_RSP, NULL);
return (true);
}
/*******************************************************************************
*
* Function L2CA_Ping
*
* Description Higher layers call this function to send an echo request.
*
* Returns true if echo request sent, else false.
*
******************************************************************************/
bool L2CA_Ping(const RawAddress& p_bd_addr, tL2CA_ECHO_RSP_CB* p_callback) {
tL2C_LCB* p_lcb;
VLOG(1) << __func__ << " BDA: " << p_bd_addr;
/* Fail if we have not established communications with the controller */
if (!BTM_IsDeviceUp()) return (false);
/* First, see if we already have a link to the remote */
p_lcb = l2cu_find_lcb_by_bd_addr(p_bd_addr, BT_TRANSPORT_BR_EDR);
if (p_lcb == NULL) {
/* No link. Get an LCB and start link establishment */
p_lcb = l2cu_allocate_lcb(p_bd_addr, false, BT_TRANSPORT_BR_EDR);
if (p_lcb == NULL) {
L2CAP_TRACE_WARNING("L2CAP - no LCB for L2CA_ping");
return (false);
}
if (!l2cu_create_conn(p_lcb, BT_TRANSPORT_BR_EDR)) {
return (false);
}
p_lcb->p_echo_rsp_cb = p_callback;
return (true);
}
/* We only allow 1 ping outstanding at a time */
if (p_lcb->p_echo_rsp_cb != NULL) {
L2CAP_TRACE_WARNING("L2CAP - rejected second L2CA_ping");
return (false);
}
/* Have a link control block. If link is disconnecting, tell user to retry
* later */
if (p_lcb->link_state == LST_DISCONNECTING) {
L2CAP_TRACE_WARNING("L2CAP - L2CA_ping rejected - link disconnecting");
return (false);
}
/* Save address of callback */
p_lcb->p_echo_rsp_cb = p_callback;
if (p_lcb->link_state == LST_CONNECTED) {
l2cu_adj_id(p_lcb, L2CAP_ADJ_BRCM_ID); /* Make sure not using Broadcom ID */
l2cu_send_peer_echo_req(p_lcb, NULL, 0);
alarm_set_on_mloop(p_lcb->l2c_lcb_timer, L2CAP_ECHO_RSP_TIMEOUT_MS,
l2c_lcb_timer_timeout, p_lcb);
}
return (true);
}
/*******************************************************************************
*
* Function L2CA_Echo
*
* Description Higher layers call this function to send an echo request
* with application-specific data.
*
* Returns true if echo request sent, else false.
*
******************************************************************************/
bool L2CA_Echo(const RawAddress& p_bd_addr, BT_HDR* p_data,
tL2CA_ECHO_DATA_CB* p_callback) {
tL2C_LCB* p_lcb;
uint8_t* pp;
VLOG(1) << __func__ << " BDA: " << p_bd_addr;
;
/* Fail if we have not established communications with the controller */
if (!BTM_IsDeviceUp()) return (false);
if (RawAddress::kAny == p_bd_addr && (p_data == NULL)) {
/* Only register callback without sending message. */
l2cb.p_echo_data_cb = p_callback;
return true;
}
/* We assume the upper layer will call this function only when the link is
* established. */
p_lcb = l2cu_find_lcb_by_bd_addr(p_bd_addr, BT_TRANSPORT_BR_EDR);
if (p_lcb == NULL) {
L2CAP_TRACE_ERROR("L2CA_Echo ERROR : link not established");
return false;
}
if (p_lcb->link_state != LST_CONNECTED) {
L2CAP_TRACE_ERROR("L2CA_Echo ERROR : link is not connected");
return false;
}
/* Save address of callback */
l2cb.p_echo_data_cb = p_callback;
/* Set the pointer to the beginning of the data */
pp = (uint8_t*)(p_data + 1) + p_data->offset;
l2cu_adj_id(p_lcb, L2CAP_ADJ_BRCM_ID); /* Make sure not using Broadcom ID */
l2cu_send_peer_echo_req(p_lcb, pp, p_data->len);
return (true);
}
bool L2CA_GetIdentifiers(uint16_t lcid, uint16_t* rcid, uint16_t* handle) {
tL2C_CCB* control_block = l2cu_find_ccb_by_cid(NULL, lcid);
if (!control_block) return false;
if (rcid) *rcid = control_block->remote_cid;
if (handle) *handle = control_block->p_lcb->handle;
return true;
}
/*******************************************************************************
*
* Function L2CA_SetIdleTimeout
*
* Description Higher layers call this function to set the idle timeout for
* a connection, or for all future connections. The "idle
* timeout" is the amount of time that a connection can remain
* up with no L2CAP channels on it. A timeout of zero means
* that the connection will be torn down immediately when the
* last channel is removed. A timeout of 0xFFFF means no
* timeout. Values are in seconds.
*
* Returns true if command succeeded, false if failed
*
* NOTE This timeout takes effect after at least 1 channel has been
* established and removed. L2CAP maintains its own timer from
* whan a connection is established till the first channel is
* set up.
******************************************************************************/
bool L2CA_SetIdleTimeout(uint16_t cid, uint16_t timeout, bool is_global) {
tL2C_CCB* p_ccb;
tL2C_LCB* p_lcb;
if (is_global) {
l2cb.idle_timeout = timeout;
} else {
/* Find the channel control block. We don't know the link it is on. */
p_ccb = l2cu_find_ccb_by_cid(NULL, cid);
if (p_ccb == NULL) {
L2CAP_TRACE_WARNING("L2CAP - no CCB for L2CA_SetIdleTimeout, CID: %d",
cid);
return (false);
}
p_lcb = p_ccb->p_lcb;
if ((p_lcb) && (p_lcb->in_use) && (p_lcb->link_state == LST_CONNECTED))
p_lcb->idle_timeout = timeout;
else
return (false);
}
return (true);
}
/*******************************************************************************
*
* Function L2CA_SetIdleTimeoutByBdAddr
*
* Description Higher layers call this function to set the idle timeout for
* a connection. The "idle timeout" is the amount of time that
* a connection can remain up with no L2CAP channels on it.
* A timeout of zero means that the connection will be torn
* down immediately when the last channel is removed.
* A timeout of 0xFFFF means no timeout. Values are in seconds.
* A bd_addr is the remote BD address. If bd_addr =
* RawAddress::kAny, then the idle timeouts for all active
* l2cap links will be changed.
*
* Returns true if command succeeded, false if failed
*
* NOTE This timeout applies to all logical channels active on the
* ACL link.
******************************************************************************/
bool L2CA_SetIdleTimeoutByBdAddr(const RawAddress& bd_addr, uint16_t timeout,
tBT_TRANSPORT transport) {
tL2C_LCB* p_lcb;
if (RawAddress::kAny != bd_addr) {
p_lcb = l2cu_find_lcb_by_bd_addr(bd_addr, transport);
if ((p_lcb) && (p_lcb->in_use) && (p_lcb->link_state == LST_CONNECTED)) {
p_lcb->idle_timeout = timeout;
if (!p_lcb->ccb_queue.p_first_ccb) l2cu_no_dynamic_ccbs(p_lcb);
} else
return false;
} else {
int xx;
tL2C_LCB* p_lcb = &l2cb.lcb_pool[0];
for (xx = 0; xx < MAX_L2CAP_LINKS; xx++, p_lcb++) {
if ((p_lcb->in_use) && (p_lcb->link_state == LST_CONNECTED)) {
p_lcb->idle_timeout = timeout;
if (!p_lcb->ccb_queue.p_first_ccb) l2cu_no_dynamic_ccbs(p_lcb);
}
}
}
return true;
}
/*******************************************************************************
*
* Function L2CA_SetTraceLevel
*
* Description This function sets the trace level for L2CAP. If called with
* a value of 0xFF, it simply reads the current trace level.
*
* Returns the new (current) trace level
*
******************************************************************************/
uint8_t L2CA_SetTraceLevel(uint8_t new_level) {
if (new_level != 0xFF) l2cb.l2cap_trace_level = new_level;
return (l2cb.l2cap_trace_level);
}
/*******************************************************************************
*
* Function L2CA_SetDesireRole
*
* Description This function sets the desire role for L2CAP.
* If the new role is L2CAP_ROLE_ALLOW_SWITCH, allow switch on
* HciCreateConnection.
* If the new role is L2CAP_ROLE_DISALLOW_SWITCH, do not allow
* switch on HciCreateConnection.
*
* If the new role is a valid role (HCI_ROLE_MASTER or
* HCI_ROLE_SLAVE), the desire role is set to the new value.
* Otherwise, it is not changed.
*
* Returns the new (current) role
*
******************************************************************************/
uint8_t L2CA_SetDesireRole(uint8_t new_role) {
L2CAP_TRACE_API("L2CA_SetDesireRole() new:x%x, disallow_switch:%d", new_role,
l2cb.disallow_switch);
if (L2CAP_ROLE_CHECK_SWITCH != (L2CAP_ROLE_CHECK_SWITCH & new_role)) {
/* do not process the allow_switch when both bits are set */
if (new_role & L2CAP_ROLE_ALLOW_SWITCH) {
l2cb.disallow_switch = false;
}
if (new_role & L2CAP_ROLE_DISALLOW_SWITCH) {
l2cb.disallow_switch = true;
}
}
if (new_role == HCI_ROLE_MASTER || new_role == HCI_ROLE_SLAVE)
l2cb.desire_role = new_role;
return (l2cb.desire_role);
}
/*******************************************************************************
*
* Function L2CA_LocalLoopbackReq
*
* Description This function sets up a CID for local loopback
*
* Returns CID of 0 if none.
*
******************************************************************************/
uint16_t L2CA_LocalLoopbackReq(uint16_t psm, uint16_t handle,
const RawAddress& p_bd_addr) {
tL2C_LCB* p_lcb;
tL2C_CCB* p_ccb;
tL2C_RCB* p_rcb;
L2CAP_TRACE_API("L2CA_LocalLoopbackReq() PSM: %d Handle: 0x%04x", psm,
handle);
/* Fail if we have not established communications with the controller */
if (!BTM_IsDeviceUp()) {
L2CAP_TRACE_WARNING("L2CAP loop req - BTU not ready");
return (0);
}
/* Fail if the PSM is not registered */
p_rcb = l2cu_find_rcb_by_psm(psm);
if (p_rcb == NULL) {
L2CAP_TRACE_WARNING("L2CAP - no RCB for L2CA_conn_req, PSM: %d", psm);
return (0);
}
p_lcb = l2cu_allocate_lcb(p_bd_addr, false, BT_TRANSPORT_BR_EDR);
if (p_lcb == NULL) {
L2CAP_TRACE_WARNING("L2CAP - no LCB for L2CA_conn_req");
return (0);
}
p_lcb->link_state = LST_CONNECTED;
p_lcb->handle = handle;
/* Allocate a channel control block */
p_ccb = l2cu_allocate_ccb(p_lcb, 0);
if (p_ccb == NULL) {
L2CAP_TRACE_WARNING("L2CAP - no CCB for L2CA_conn_req");
return (0);
}
/* Save registration info */
p_ccb->p_rcb = p_rcb;
p_ccb->chnl_state = CST_OPEN;
p_ccb->remote_cid = p_ccb->local_cid;
p_ccb->config_done = CFG_DONE_MASK;
/* Return the local CID as our handle */
return (p_ccb->local_cid);
}
/*******************************************************************************
*
* Function L2CA_SetAclPriority
*
* Description Sets the transmission priority for a channel.
* (For initial implementation only two values are valid.
* L2CAP_PRIORITY_NORMAL and L2CAP_PRIORITY_HIGH).
*
* Returns true if a valid channel, else false
*
******************************************************************************/
bool L2CA_SetAclPriority(const RawAddress& bd_addr, uint8_t priority) {
VLOG(1) << __func__ << " BDA: " << bd_addr
<< ", priority: " << std::to_string(priority);
return (l2cu_set_acl_priority(bd_addr, priority, false));
}
/*******************************************************************************
*
* Function L2CA_FlowControl
*
* Description Higher layers call this function to flow control a channel.
*
* data_enabled - true data flows, false data is stopped
*
* Returns true if valid channel, else false
*
******************************************************************************/
bool L2CA_FlowControl(uint16_t cid, bool data_enabled) {
tL2C_CCB* p_ccb;
bool on_off = !data_enabled;
L2CAP_TRACE_API("L2CA_FlowControl(%d) CID: 0x%04x", on_off, cid);
/* Find the channel control block. We don't know the link it is on. */
p_ccb = l2cu_find_ccb_by_cid(NULL, cid);
if (p_ccb == NULL) {
L2CAP_TRACE_WARNING(
"L2CAP - no CCB for L2CA_FlowControl, CID: 0x%04x data_enabled: %d",
cid, data_enabled);
return (false);
}
if (p_ccb->peer_cfg.fcr.mode != L2CAP_FCR_ERTM_MODE) {
L2CAP_TRACE_EVENT("L2CA_FlowControl() invalid mode:%d",
p_ccb->peer_cfg.fcr.mode);
return (false);
}
if (p_ccb->fcrb.local_busy != on_off) {
p_ccb->fcrb.local_busy = on_off;
if ((p_ccb->chnl_state == CST_OPEN) && (!p_ccb->fcrb.wait_ack)) {
if (on_off)
l2c_fcr_send_S_frame(p_ccb, L2CAP_FCR_SUP_RNR, 0);
else
l2c_fcr_send_S_frame(p_ccb, L2CAP_FCR_SUP_RR, L2CAP_FCR_P_BIT);
}
}
return (true);
}
/*******************************************************************************
*
* Function L2CA_SendTestSFrame
*
* Description Higher layers call this function to send a test S-frame.
*
* Returns true if valid Channel, else false
*
******************************************************************************/
bool L2CA_SendTestSFrame(uint16_t cid, uint8_t sup_type, uint8_t back_track) {
tL2C_CCB* p_ccb;
L2CAP_TRACE_API(
"L2CA_SendTestSFrame() CID: 0x%04x Type: 0x%02x back_track: %u", cid,
sup_type, back_track);
/* Find the channel control block. We don't know the link it is on. */
p_ccb = l2cu_find_ccb_by_cid(NULL, cid);
if (p_ccb == NULL) {
L2CAP_TRACE_WARNING("L2CAP - no CCB for L2CA_SendTestSFrame, CID: %d", cid);
return (false);
}
if ((p_ccb->chnl_state != CST_OPEN) ||
(p_ccb->peer_cfg.fcr.mode != L2CAP_FCR_ERTM_MODE))
return (false);
p_ccb->fcrb.next_seq_expected -= back_track;
l2c_fcr_send_S_frame(
p_ccb, (uint16_t)(sup_type & 3),
(uint16_t)(sup_type & (L2CAP_FCR_P_BIT | L2CAP_FCR_F_BIT)));
return (true);
}
/*******************************************************************************
*
* Function L2CA_SetTxPriority
*
* Description Sets the transmission priority for a channel.
*
* Returns true if a valid channel, else false
*
******************************************************************************/
bool L2CA_SetTxPriority(uint16_t cid, tL2CAP_CHNL_PRIORITY priority) {
tL2C_CCB* p_ccb;
L2CAP_TRACE_API("L2CA_SetTxPriority() CID: 0x%04x, priority:%d", cid,
priority);
/* Find the channel control block. We don't know the link it is on. */
p_ccb = l2cu_find_ccb_by_cid(NULL, cid);
if (p_ccb == NULL) {
L2CAP_TRACE_WARNING("L2CAP - no CCB for L2CA_SetTxPriority, CID: %d", cid);
return (false);
}
/* it will update the order of CCB in LCB by priority and update round robin
* service variables */
l2cu_change_pri_ccb(p_ccb, priority);
return (true);
}
/*******************************************************************************
*
* Function L2CA_SetChnlDataRate
*
* Description Sets the tx/rx data rate for a channel.
*
* Returns true if a valid channel, else false
*
******************************************************************************/
bool L2CA_SetChnlDataRate(uint16_t cid, tL2CAP_CHNL_DATA_RATE tx,
tL2CAP_CHNL_DATA_RATE rx) {
tL2C_CCB* p_ccb;
L2CAP_TRACE_API("L2CA_SetChnlDataRate() CID: 0x%04x, tx:%d, rx:%d", cid, tx,
rx);
/* Find the channel control block. We don't know the link it is on. */
p_ccb = l2cu_find_ccb_by_cid(NULL, cid);
if (p_ccb == NULL) {
L2CAP_TRACE_WARNING("L2CAP - no CCB for L2CA_SetChnlDataRate, CID: %d",
cid);
return (false);
}
p_ccb->tx_data_rate = tx;
p_ccb->rx_data_rate = rx;
/* Adjust channel buffer allocation */
l2c_link_adjust_chnl_allocation();
return (true);
}
/*******************************************************************************
*
* Function L2CA_SetFlushTimeout
*
* Description This function set the automatic flush time out in Baseband
* for ACL-U packets.
* BdAddr : the remote BD address of ACL link. If it is
* BT_DB_ANY then the flush time out will be applied to
* all ACL links.
* FlushTimeout: flush time out in ms
* 0x0000 : No automatic flush
* L2CAP_NO_RETRANSMISSION : No retransmission
* 0x0002 - 0xFFFE : flush time out, if
* (flush_tout * 8) + 3 / 5) <=
* HCI_MAX_AUTOMATIC_FLUSH_TIMEOUT
* (in 625us slot).
* Otherwise, return false.
* L2CAP_NO_AUTOMATIC_FLUSH : No automatic flush
*
* Returns true if command succeeded, false if failed
*
* NOTE This flush timeout applies to all logical channels active on
* the ACL link.
******************************************************************************/
bool L2CA_SetFlushTimeout(const RawAddress& bd_addr, uint16_t flush_tout) {
tL2C_LCB* p_lcb;
uint16_t hci_flush_to;
uint32_t temp;
/* no automatic flush (infinite timeout) */
if (flush_tout == 0x0000) {
hci_flush_to = flush_tout;
flush_tout = L2CAP_NO_AUTOMATIC_FLUSH;
}
/* no retransmission */
else if (flush_tout == L2CAP_NO_RETRANSMISSION) {
/* not mandatory range for controller */
/* Packet is flushed before getting any ACK/NACK */
/* To do this, flush timeout should be 1 baseband slot */
hci_flush_to = flush_tout;
}
/* no automatic flush (infinite timeout) */
else if (flush_tout == L2CAP_NO_AUTOMATIC_FLUSH) {
hci_flush_to = 0x0000;
} else {
/* convert L2CAP flush_to to 0.625 ms units, with round */
temp = (((uint32_t)flush_tout * 8) + 3) / 5;
/* if L2CAP flush_to within range of HCI, set HCI flush timeout */
if (temp > HCI_MAX_AUTOMATIC_FLUSH_TIMEOUT) {
L2CAP_TRACE_WARNING(
"WARNING L2CA_SetFlushTimeout timeout(0x%x) is out of range",
flush_tout);
return false;
} else {
hci_flush_to = (uint16_t)temp;
}
}
if (RawAddress::kAny != bd_addr) {
p_lcb = l2cu_find_lcb_by_bd_addr(bd_addr, BT_TRANSPORT_BR_EDR);
if ((p_lcb) && (p_lcb->in_use) && (p_lcb->link_state == LST_CONNECTED)) {
if (p_lcb->link_flush_tout != flush_tout) {
p_lcb->link_flush_tout = flush_tout;
VLOG(1) << __func__ << " BDA: " << bd_addr << " " << flush_tout << "ms";
btsnd_hcic_write_auto_flush_tout(p_lcb->handle, hci_flush_to);
}
} else {
LOG(WARNING) << __func__ << " No lcb for bd_addr " << bd_addr;
return (false);
}
} else {
int xx;
p_lcb = &l2cb.lcb_pool[0];
for (xx = 0; xx < MAX_L2CAP_LINKS; xx++, p_lcb++) {
if ((p_lcb->in_use) && (p_lcb->link_state == LST_CONNECTED)) {
if (p_lcb->link_flush_tout != flush_tout) {
p_lcb->link_flush_tout = flush_tout;
VLOG(1) << __func__ << " BDA: " << p_lcb->remote_bd_addr << " "
<< flush_tout << "ms";
btsnd_hcic_write_auto_flush_tout(p_lcb->handle, hci_flush_to);
}
}
}
}
return (true);
}
/*******************************************************************************
*
* Function L2CA_GetPeerFeatures
*
* Description Get a peers features and fixed channel map
*
* Parameters: BD address of the peer
* Pointers to features and channel mask storage area
*
* Return value: true if peer is connected
*
******************************************************************************/
bool L2CA_GetPeerFeatures(const RawAddress& bd_addr, uint32_t* p_ext_feat,
uint8_t* p_chnl_mask) {
tL2C_LCB* p_lcb;
/* We must already have a link to the remote */
p_lcb = l2cu_find_lcb_by_bd_addr(bd_addr, BT_TRANSPORT_BR_EDR);
if (p_lcb == NULL) {
LOG(WARNING) << __func__ << " No BDA: " << bd_addr;
return false;
}
VLOG(1) << __func__ << " BDA: " << bd_addr
<< StringPrintf(" ExtFea: 0x%08x Chnl_Mask[0]: 0x%02x",
p_lcb->peer_ext_fea, p_lcb->peer_chnl_mask[0]);
*p_ext_feat = p_lcb->peer_ext_fea;
memcpy(p_chnl_mask, p_lcb->peer_chnl_mask, L2CAP_FIXED_CHNL_ARRAY_SIZE);
return true;
}
/*******************************************************************************
*
* Function L2CA_GetBDAddrbyHandle
*
* Description Get BD address for the given HCI handle
*
* Parameters: HCI handle
* BD address of the peer
*
* Return value: true if found lcb for the given handle, false otherwise
*
******************************************************************************/
bool L2CA_GetBDAddrbyHandle(uint16_t handle, RawAddress& bd_addr) {
tL2C_LCB* p_lcb = NULL;
bool found_dev = false;
p_lcb = l2cu_find_lcb_by_handle(handle);
if (p_lcb) {
found_dev = true;
bd_addr = p_lcb->remote_bd_addr;
}
return found_dev;
}
/*******************************************************************************
*
* Function L2CA_GetChnlFcrMode
*
* Description Get the channel FCR mode
*
* Parameters: Local CID
*
* Return value: Channel mode
*
******************************************************************************/
uint8_t L2CA_GetChnlFcrMode(uint16_t lcid) {
tL2C_CCB* p_ccb = l2cu_find_ccb_by_cid(NULL, lcid);
if (p_ccb) {
L2CAP_TRACE_API("L2CA_GetChnlFcrMode() returns mode %d",
p_ccb->peer_cfg.fcr.mode);
return (p_ccb->peer_cfg.fcr.mode);
}
L2CAP_TRACE_API("L2CA_GetChnlFcrMode() returns mode L2CAP_FCR_BASIC_MODE");
return (L2CAP_FCR_BASIC_MODE);
}
#if (L2CAP_NUM_FIXED_CHNLS > 0)
/*******************************************************************************
*
* Function L2CA_RegisterFixedChannel
*
* Description Register a fixed channel.
*
* Parameters: Fixed Channel #
* Channel Callbacks and config
*
* Return value: -
*
******************************************************************************/
bool L2CA_RegisterFixedChannel(uint16_t fixed_cid,
tL2CAP_FIXED_CHNL_REG* p_freg) {
if ((fixed_cid < L2CAP_FIRST_FIXED_CHNL) ||
(fixed_cid > L2CAP_LAST_FIXED_CHNL)) {
L2CAP_TRACE_ERROR("L2CA_RegisterFixedChannel() Invalid CID: 0x%04x",
fixed_cid);
return (false);
}
l2cb.fixed_reg[fixed_cid - L2CAP_FIRST_FIXED_CHNL] = *p_freg;
return (true);
}
/*******************************************************************************
*
* Function L2CA_ConnectFixedChnl
*
* Description Connect an fixed signalling channel to a remote device.
*
* Parameters: Fixed CID
* BD Address of remote
*
* Return value: true if connection started
*
******************************************************************************/
bool L2CA_ConnectFixedChnl(uint16_t fixed_cid, const RawAddress& rem_bda) {
uint8_t phy = controller_get_interface()->get_le_all_initiating_phys();
return L2CA_ConnectFixedChnl(fixed_cid, rem_bda, phy);
}
bool L2CA_ConnectFixedChnl(uint16_t fixed_cid, const RawAddress& rem_bda,
uint8_t initiating_phys) {
tL2C_LCB* p_lcb;
tBT_TRANSPORT transport = BT_TRANSPORT_BR_EDR;
VLOG(1) << __func__ << " BDA: " << rem_bda
<< StringPrintf("CID: 0x%04x ", fixed_cid);
// Check CID is valid and registered
if ((fixed_cid < L2CAP_FIRST_FIXED_CHNL) ||
(fixed_cid > L2CAP_LAST_FIXED_CHNL) ||
(l2cb.fixed_reg[fixed_cid - L2CAP_FIRST_FIXED_CHNL].pL2CA_FixedData_Cb ==
NULL)) {
L2CAP_TRACE_ERROR("%s() Invalid CID: 0x%04x", __func__, fixed_cid);
return (false);
}
// Fail if BT is not yet up
if (!BTM_IsDeviceUp()) {
L2CAP_TRACE_WARNING("%s(0x%04x) - BTU not ready", __func__, fixed_cid);
return (false);
}
if (fixed_cid >= L2CAP_ATT_CID && fixed_cid <= L2CAP_SMP_CID)
transport = BT_TRANSPORT_LE;
tL2C_BLE_FIXED_CHNLS_MASK peer_channel_mask;
// If we already have a link to the remote, check if it supports that CID
p_lcb = l2cu_find_lcb_by_bd_addr(rem_bda, transport);
if (p_lcb != NULL) {
// Fixed channels are mandatory on LE transports so ignore the received
// channel mask and use the locally cached LE channel mask.
if (transport == BT_TRANSPORT_LE)
peer_channel_mask = l2cb.l2c_ble_fixed_chnls_mask;
else
peer_channel_mask = p_lcb->peer_chnl_mask[0];
// Check for supported channel
if (!(peer_channel_mask & (1 << fixed_cid))) {
VLOG(2) << __func__ << " BDA " << rem_bda
<< StringPrintf(" CID:0x%04x not supported", fixed_cid);
return false;
}
// Get a CCB and link the lcb to it
if (!l2cu_initialize_fixed_ccb(
p_lcb, fixed_cid,
&l2cb.fixed_reg[fixed_cid - L2CAP_FIRST_FIXED_CHNL]
.fixed_chnl_opts)) {
L2CAP_TRACE_WARNING("%s(0x%04x) - LCB but no CCB", __func__, fixed_cid);
return false;
}
// racing with disconnecting, queue the connection request
if (p_lcb->link_state == LST_DISCONNECTING) {
L2CAP_TRACE_DEBUG("$s() - link disconnecting: RETRY LATER", __func__);
/* Save ccb so it can be started after disconnect is finished */
p_lcb->p_pending_ccb =
p_lcb->p_fixed_ccbs[fixed_cid - L2CAP_FIRST_FIXED_CHNL];
return true;
}
(*l2cb.fixed_reg[fixed_cid - L2CAP_FIRST_FIXED_CHNL].pL2CA_FixedConn_Cb)(
fixed_cid, p_lcb->remote_bd_addr, true, 0, p_lcb->transport);
return true;
}
// No link. Get an LCB and start link establishment
p_lcb = l2cu_allocate_lcb(rem_bda, false, transport);
if (p_lcb == NULL) {
L2CAP_TRACE_WARNING("%s(0x%04x) - no LCB", __func__, fixed_cid);
return false;
}
// Get a CCB and link the lcb to it
if (!l2cu_initialize_fixed_ccb(
p_lcb, fixed_cid, &l2cb.fixed_reg[fixed_cid - L2CAP_FIRST_FIXED_CHNL]
.fixed_chnl_opts)) {
p_lcb->disc_reason = L2CAP_CONN_NO_RESOURCES;
L2CAP_TRACE_WARNING("%s(0x%04x) - no CCB", __func__, fixed_cid);
l2cu_release_lcb(p_lcb);
return false;
}
if (!l2cu_create_conn(p_lcb, transport, initiating_phys)) {
L2CAP_TRACE_WARNING("%s() - create_conn failed", __func__);
l2cu_release_lcb(p_lcb);
return false;
}
return true;
}
/*******************************************************************************
*
* Function L2CA_SendFixedChnlData
*
* Description Write data on a fixed channel.
*
* Parameters: Fixed CID
* BD Address of remote
* Pointer to buffer of type BT_HDR
*
* Return value L2CAP_DW_SUCCESS, if data accepted
* L2CAP_DW_FAILED, if error
*
******************************************************************************/
uint16_t L2CA_SendFixedChnlData(uint16_t fixed_cid, const RawAddress& rem_bda,
BT_HDR* p_buf) {
tL2C_LCB* p_lcb;
tBT_TRANSPORT transport = BT_TRANSPORT_BR_EDR;
VLOG(2) << __func__ << " BDA: " << rem_bda
<< StringPrintf(" CID: 0x%04x", fixed_cid);
if (fixed_cid >= L2CAP_ATT_CID && fixed_cid <= L2CAP_SMP_CID)
transport = BT_TRANSPORT_LE;
// Check CID is valid and registered
if ((fixed_cid < L2CAP_FIRST_FIXED_CHNL) ||
(fixed_cid > L2CAP_LAST_FIXED_CHNL) ||
(l2cb.fixed_reg[fixed_cid - L2CAP_FIRST_FIXED_CHNL].pL2CA_FixedData_Cb ==
NULL)) {
L2CAP_TRACE_ERROR("L2CA_SendFixedChnlData() Invalid CID: 0x%04x",
fixed_cid);
osi_free(p_buf);
return (L2CAP_DW_FAILED);
}
// Fail if BT is not yet up
if (!BTM_IsDeviceUp()) {
L2CAP_TRACE_WARNING("L2CA_SendFixedChnlData(0x%04x) - BTU not ready",
fixed_cid);
osi_free(p_buf);
return (L2CAP_DW_FAILED);
}
// We need to have a link up
p_lcb = l2cu_find_lcb_by_bd_addr(rem_bda, transport);
if (p_lcb == NULL || p_lcb->link_state == LST_DISCONNECTING) {
/* if link is disconnecting, also report data sending failure */
L2CAP_TRACE_WARNING("L2CA_SendFixedChnlData(0x%04x) - no LCB", fixed_cid);
osi_free(p_buf);
return (L2CAP_DW_FAILED);
}
tL2C_BLE_FIXED_CHNLS_MASK peer_channel_mask;
// Select peer channels mask to use depending on transport
if (transport == BT_TRANSPORT_LE)
peer_channel_mask = l2cb.l2c_ble_fixed_chnls_mask;
else
peer_channel_mask = p_lcb->peer_chnl_mask[0];
if ((peer_channel_mask & (1 << fixed_cid)) == 0) {
L2CAP_TRACE_WARNING(
"L2CA_SendFixedChnlData() - peer does not support fixed chnl: 0x%04x",
fixed_cid);
osi_free(p_buf);
return (L2CAP_DW_FAILED);
}
p_buf->event = 0;
p_buf->layer_specific = L2CAP_FLUSHABLE_CH_BASED;
if (!p_lcb->p_fixed_ccbs[fixed_cid - L2CAP_FIRST_FIXED_CHNL]) {
if (!l2cu_initialize_fixed_ccb(
p_lcb, fixed_cid,
&l2cb.fixed_reg[fixed_cid - L2CAP_FIRST_FIXED_CHNL]
.fixed_chnl_opts)) {
L2CAP_TRACE_WARNING("L2CA_SendFixedChnlData() - no CCB for chnl: 0x%4x",
fixed_cid);
osi_free(p_buf);
return (L2CAP_DW_FAILED);
}
}
// If already congested, do not accept any more packets
if (p_lcb->p_fixed_ccbs[fixed_cid - L2CAP_FIRST_FIXED_CHNL]->cong_sent) {
L2CAP_TRACE_ERROR(
"L2CAP - CID: 0x%04x cannot send, already congested \
xmit_hold_q.count: %u buff_quota: %u",
fixed_cid, fixed_queue_length(
p_lcb->p_fixed_ccbs[fixed_cid - L2CAP_FIRST_FIXED_CHNL]
->xmit_hold_q),
p_lcb->p_fixed_ccbs[fixed_cid - L2CAP_FIRST_FIXED_CHNL]->buff_quota);
osi_free(p_buf);
return (L2CAP_DW_FAILED);
}
l2c_enqueue_peer_data(p_lcb->p_fixed_ccbs[fixed_cid - L2CAP_FIRST_FIXED_CHNL],
p_buf);
l2c_link_check_send_pkts(p_lcb, NULL, NULL);
// If there is no dynamic CCB on the link, restart the idle timer each time
// something is sent
if (p_lcb->in_use && p_lcb->link_state == LST_CONNECTED &&
!p_lcb->ccb_queue.p_first_ccb) {
l2cu_no_dynamic_ccbs(p_lcb);
}
if (p_lcb->p_fixed_ccbs[fixed_cid - L2CAP_FIRST_FIXED_CHNL]->cong_sent)
return (L2CAP_DW_CONGESTED);
return (L2CAP_DW_SUCCESS);
}
/*******************************************************************************
*
* Function L2CA_RemoveFixedChnl
*
* Description Remove a fixed channel to a remote device.
*
* Parameters: Fixed CID
* BD Address of remote
* Idle timeout to use (or 0xFFFF if don't care)
*
* Return value: true if channel removed
*
******************************************************************************/
bool L2CA_RemoveFixedChnl(uint16_t fixed_cid, const RawAddress& rem_bda) {
tL2C_LCB* p_lcb;
tL2C_CCB* p_ccb;
tBT_TRANSPORT transport = BT_TRANSPORT_BR_EDR;
/* Check CID is valid and registered */
if ((fixed_cid < L2CAP_FIRST_FIXED_CHNL) ||
(fixed_cid > L2CAP_LAST_FIXED_CHNL) ||
(l2cb.fixed_reg[fixed_cid - L2CAP_FIRST_FIXED_CHNL].pL2CA_FixedData_Cb ==
NULL)) {
L2CAP_TRACE_ERROR("L2CA_RemoveFixedChnl() Invalid CID: 0x%04x", fixed_cid);
return (false);
}
if (fixed_cid >= L2CAP_ATT_CID && fixed_cid <= L2CAP_SMP_CID)
transport = BT_TRANSPORT_LE;
/* Is a fixed channel connected to the remote BDA ?*/
p_lcb = l2cu_find_lcb_by_bd_addr(rem_bda, transport);
if (((p_lcb) == NULL) ||
(!p_lcb->p_fixed_ccbs[fixed_cid - L2CAP_FIRST_FIXED_CHNL])) {
LOG(WARNING) << __func__ << " BDA: " << rem_bda
<< StringPrintf(" CID: 0x%04x not connected", fixed_cid);
return (false);
}
VLOG(2) << __func__ << " BDA: " << rem_bda
<< StringPrintf(" CID: 0x%04x", fixed_cid);
/* Release the CCB, starting an inactivity timeout on the LCB if no other CCBs
* exist */
p_ccb = p_lcb->p_fixed_ccbs[fixed_cid - L2CAP_FIRST_FIXED_CHNL];
p_lcb->p_fixed_ccbs[fixed_cid - L2CAP_FIRST_FIXED_CHNL] = NULL;
p_lcb->disc_reason = HCI_ERR_CONN_CAUSE_LOCAL_HOST;
// Retain the link for a few more seconds after SMP pairing is done, since
// the Android platform always does service discovery after pairing is
// complete. This will avoid the link down (pairing is complete) and an
// immediate re-connection for service discovery.
// Some devices do not do auto advertising when link is dropped, thus fail
// the second connection and service discovery.
if ((fixed_cid == L2CAP_ATT_CID) && !p_lcb->ccb_queue.p_first_ccb)
p_lcb->idle_timeout = 0;
l2cu_release_ccb(p_ccb);
return (true);
}
/*******************************************************************************
*
* Function L2CA_SetFixedChannelTout
*
* Description Higher layers call this function to set the idle timeout for
* a fixed channel. The "idle timeout" is the amount of time
* that a connection can remain up with no L2CAP channels on
* it. A timeout of zero means that the connection will be torn
* down immediately when the last channel is removed.
* A timeout of 0xFFFF means no timeout. Values are in seconds.
* A bd_addr is the remote BD address.
*
* Returns true if command succeeded, false if failed
*
******************************************************************************/
bool L2CA_SetFixedChannelTout(const RawAddress& rem_bda, uint16_t fixed_cid,
uint16_t idle_tout) {
tL2C_LCB* p_lcb;
tBT_TRANSPORT transport = BT_TRANSPORT_BR_EDR;
if (fixed_cid >= L2CAP_ATT_CID && fixed_cid <= L2CAP_SMP_CID)
transport = BT_TRANSPORT_LE;
/* Is a fixed channel connected to the remote BDA ?*/
p_lcb = l2cu_find_lcb_by_bd_addr(rem_bda, transport);
if (((p_lcb) == NULL) ||
(!p_lcb->p_fixed_ccbs[fixed_cid - L2CAP_FIRST_FIXED_CHNL])) {
LOG(WARNING) << __func__ << " BDA: " << rem_bda
<< StringPrintf(" CID: 0x%04x not connected", fixed_cid);
return (false);
}
p_lcb->p_fixed_ccbs[fixed_cid - L2CAP_FIRST_FIXED_CHNL]
->fixed_chnl_idle_tout = idle_tout;
if (p_lcb->in_use && p_lcb->link_state == LST_CONNECTED &&
!p_lcb->ccb_queue.p_first_ccb) {
/* If there are no dynamic CCBs, (re)start the idle timer in case we changed
* it */
l2cu_no_dynamic_ccbs(p_lcb);
}
return true;
}
#endif /* #if (L2CAP_NUM_FIXED_CHNLS > 0) */
/*******************************************************************************
*
* Function L2CA_GetCurrentConfig
*
* Description This function returns configurations of L2CAP channel
* pp_our_cfg : pointer of our saved configuration options
* p_our_cfg_bits : valid config in bitmap
* pp_peer_cfg: pointer of peer's saved configuration options
* p_peer_cfg_bits : valid config in bitmap
*
* Returns true if successful
*
******************************************************************************/
bool L2CA_GetCurrentConfig(uint16_t lcid, tL2CAP_CFG_INFO** pp_our_cfg,
tL2CAP_CH_CFG_BITS* p_our_cfg_bits,
tL2CAP_CFG_INFO** pp_peer_cfg,
tL2CAP_CH_CFG_BITS* p_peer_cfg_bits) {
tL2C_CCB* p_ccb;
L2CAP_TRACE_API("L2CA_GetCurrentConfig() CID: 0x%04x", lcid);
p_ccb = l2cu_find_ccb_by_cid(NULL, lcid);
if (p_ccb) {
*pp_our_cfg = &(p_ccb->our_cfg);
/* convert valid config items into bitmap */
*p_our_cfg_bits = 0;
if (p_ccb->our_cfg.mtu_present) *p_our_cfg_bits |= L2CAP_CH_CFG_MASK_MTU;
if (p_ccb->our_cfg.qos_present) *p_our_cfg_bits |= L2CAP_CH_CFG_MASK_QOS;
if (p_ccb->our_cfg.flush_to_present)
*p_our_cfg_bits |= L2CAP_CH_CFG_MASK_FLUSH_TO;
if (p_ccb->our_cfg.fcr_present) *p_our_cfg_bits |= L2CAP_CH_CFG_MASK_FCR;
if (p_ccb->our_cfg.fcs_present) *p_our_cfg_bits |= L2CAP_CH_CFG_MASK_FCS;
if (p_ccb->our_cfg.ext_flow_spec_present)
*p_our_cfg_bits |= L2CAP_CH_CFG_MASK_EXT_FLOW_SPEC;
*pp_peer_cfg = &(p_ccb->peer_cfg);
*p_peer_cfg_bits = p_ccb->peer_cfg_bits;
return true;
} else {
L2CAP_TRACE_ERROR("No CCB for CID:0x%04x", lcid);
return false;
}
}
/*******************************************************************************
*
* Function L2CA_GetConnectionConfig
*
* Description This function returns configurations of L2CAP channel
* pp_l2c_ccb : pointer to this channels L2CAP ccb data.
*
* Returns true if successful
*
******************************************************************************/
bool L2CA_GetConnectionConfig(uint16_t lcid, uint16_t* mtu, uint16_t* rcid,
uint16_t* handle) {
tL2C_CCB* p_ccb = l2cu_find_ccb_by_cid(NULL, lcid);
;
L2CAP_TRACE_API("%s CID: 0x%04x", __func__, lcid);
if (p_ccb) {
*mtu = L2CAP_MTU_SIZE;
if (p_ccb->our_cfg.mtu_present) *mtu = p_ccb->our_cfg.mtu;
*rcid = p_ccb->remote_cid;
*handle = p_ccb->p_lcb->handle;
return true;
}
L2CAP_TRACE_ERROR("%s No CCB for CID:0x%04x", __func__, lcid);
return false;
}
/*******************************************************************************
*
* Function L2CA_RegForNoCPEvt
*
* Description Register callback for Number of Completed Packets event.
*
* Input Param p_cb - callback for Number of completed packets event
* p_bda - BT address of remote device
*
* Returns true if registered OK, else false
*
******************************************************************************/
bool L2CA_RegForNoCPEvt(tL2CA_NOCP_CB* p_cb, const RawAddress& p_bda) {
tL2C_LCB* p_lcb;
/* Find the link that is associated with this remote bdaddr */
p_lcb = l2cu_find_lcb_by_bd_addr(p_bda, BT_TRANSPORT_BR_EDR);
/* If no link for this handle, nothing to do. */
if (!p_lcb) return false;
p_lcb->p_nocp_cb = p_cb;
return true;
}
/*******************************************************************************
*
* Function L2CA_DataWrite
*
* Description Higher layers call this function to write data.
*
* Returns L2CAP_DW_SUCCESS, if data accepted, else false
* L2CAP_DW_CONGESTED, if data accepted and the channel is
* congested
* L2CAP_DW_FAILED, if error
*
******************************************************************************/
uint8_t L2CA_DataWrite(uint16_t cid, BT_HDR* p_data) {
L2CAP_TRACE_API("L2CA_DataWrite() CID: 0x%04x Len: %d", cid, p_data->len);
return l2c_data_write(cid, p_data, L2CAP_FLUSHABLE_CH_BASED);
}
/*******************************************************************************
*
* Function L2CA_SetChnlFlushability
*
* Description Higher layers call this function to set a channels
* flushability flags
*
* Returns true if CID found, else false
*
******************************************************************************/
bool L2CA_SetChnlFlushability(uint16_t cid, bool is_flushable) {
#if (L2CAP_NON_FLUSHABLE_PB_INCLUDED == TRUE)
tL2C_CCB* p_ccb;
/* Find the channel control block. We don't know the link it is on. */
p_ccb = l2cu_find_ccb_by_cid(NULL, cid);
if (p_ccb == NULL) {
L2CAP_TRACE_WARNING("L2CAP - no CCB for L2CA_SetChnlFlushability, CID: %d",
cid);
return (false);
}
p_ccb->is_flushable = is_flushable;
L2CAP_TRACE_API("L2CA_SetChnlFlushability() CID: 0x%04x is_flushable: %d",
cid, is_flushable);
#endif
return (true);
}
/*******************************************************************************
*
* Function L2CA_DataWriteEx
*
* Description Higher layers call this function to write data with extended
* flags.
* flags : L2CAP_FLUSHABLE_CH_BASED
* L2CAP_FLUSHABLE_PKT
* L2CAP_NON_FLUSHABLE_PKT
*
* Returns L2CAP_DW_SUCCESS, if data accepted, else false
* L2CAP_DW_CONGESTED, if data accepted and the channel is
* congested
* L2CAP_DW_FAILED, if error
*
******************************************************************************/
uint8_t L2CA_DataWriteEx(uint16_t cid, BT_HDR* p_data, uint16_t flags) {
L2CAP_TRACE_API("L2CA_DataWriteEx() CID: 0x%04x Len: %d Flags:0x%04X", cid,
p_data->len, flags);
return l2c_data_write(cid, p_data, flags);
}
/*******************************************************************************
*
* Function L2CA_FlushChannel
*
* Description This function flushes none, some or all buffers queued up
* for xmission for a particular CID. If called with
* L2CAP_FLUSH_CHANS_GET (0), it simply returns the number
* of buffers queued for that CID L2CAP_FLUSH_CHANS_ALL (0xffff)
* flushes all buffers. All other values specifies the maximum
* buffers to flush.
*
* Returns Number of buffers left queued for that CID
*
******************************************************************************/
uint16_t L2CA_FlushChannel(uint16_t lcid, uint16_t num_to_flush) {
tL2C_CCB* p_ccb;
tL2C_LCB* p_lcb;
uint16_t num_left = 0, num_flushed1 = 0, num_flushed2 = 0;
p_ccb = l2cu_find_ccb_by_cid(NULL, lcid);
if (!p_ccb || (p_ccb->p_lcb == NULL)) {
L2CAP_TRACE_WARNING(
"L2CA_FlushChannel() abnormally returning 0 CID: 0x%04x", lcid);
return (0);
}
p_lcb = p_ccb->p_lcb;
if (num_to_flush != L2CAP_FLUSH_CHANS_GET) {
L2CAP_TRACE_API(
"L2CA_FlushChannel (FLUSH) CID: 0x%04x NumToFlush: %d QC: %u "
"pFirst: 0x%08x",
lcid, num_to_flush, fixed_queue_length(p_ccb->xmit_hold_q),
fixed_queue_try_peek_first(p_ccb->xmit_hold_q));
} else {
L2CAP_TRACE_API("L2CA_FlushChannel (QUERY) CID: 0x%04x", lcid);
}
/* Cannot flush eRTM buffers once they have a sequence number */
if (p_ccb->peer_cfg.fcr.mode != L2CAP_FCR_ERTM_MODE) {
#if (L2CAP_NON_FLUSHABLE_PB_INCLUDED == TRUE)
if (num_to_flush != L2CAP_FLUSH_CHANS_GET) {
/* If the controller supports enhanced flush, flush the data queued at the
* controller */
if ((HCI_NON_FLUSHABLE_PB_SUPPORTED(BTM_ReadLocalFeatures())) &&
(BTM_GetNumScoLinks() == 0)) {
if (!l2cb.is_flush_active) {
l2cb.is_flush_active = true;
/* The only packet type defined - 0 - Automatically-Flushable Only */
btsnd_hcic_enhanced_flush(p_lcb->handle, 0);
}
}
}
#endif
// Iterate though list and flush the amount requested from
// the transmit data queue that satisfy the layer and event conditions.
for (const list_node_t* node = list_begin(p_lcb->link_xmit_data_q);
(num_to_flush > 0) && node != list_end(p_lcb->link_xmit_data_q);) {
BT_HDR* p_buf = (BT_HDR*)list_node(node);
node = list_next(node);
if ((p_buf->layer_specific == 0) && (p_buf->event == lcid)) {
num_to_flush--;
num_flushed1++;
list_remove(p_lcb->link_xmit_data_q, p_buf);
osi_free(p_buf);
}
}
}
/* If needed, flush buffers in the CCB xmit hold queue */
while ((num_to_flush != 0) && (!fixed_queue_is_empty(p_ccb->xmit_hold_q))) {
BT_HDR* p_buf = (BT_HDR*)fixed_queue_try_dequeue(p_ccb->xmit_hold_q);
osi_free(p_buf);
num_to_flush--;
num_flushed2++;
}
/* If app needs to track all packets, call him */
if ((p_ccb->p_rcb) && (p_ccb->p_rcb->api.pL2CA_TxComplete_Cb) &&
(num_flushed2))
(*p_ccb->p_rcb->api.pL2CA_TxComplete_Cb)(p_ccb->local_cid, num_flushed2);
/* Now count how many are left */
for (const list_node_t* node = list_begin(p_lcb->link_xmit_data_q);
node != list_end(p_lcb->link_xmit_data_q); node = list_next(node)) {
BT_HDR* p_buf = (BT_HDR*)list_node(node);
if (p_buf->event == lcid) num_left++;
}
/* Add in the number in the CCB xmit queue */
num_left += fixed_queue_length(p_ccb->xmit_hold_q);
/* Return the local number of buffers left for the CID */
L2CAP_TRACE_DEBUG("L2CA_FlushChannel() flushed: %u + %u, num_left: %u",
num_flushed1, num_flushed2, num_left);
/* If we were congested, and now we are not, tell the app */
l2cu_check_channel_congestion(p_ccb);
return (num_left);
}