1 /* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ 2 /* 3 * include/linux/spi/spidev.h 4 * 5 * Copyright (C) 2006 SWAPP 6 * Andrea Paterniani <a.paterniani@swapp-eng.it> 7 * 8 * This program is free software; you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License as published by 10 * the Free Software Foundation; either version 2 of the License, or 11 * (at your option) any later version. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 21 */ 22 23 #ifndef SPIDEV_H 24 #define SPIDEV_H 25 26 #include <linux/types.h> 27 #include <linux/ioctl.h> 28 29 /* User space versions of kernel symbols for SPI clocking modes, 30 * matching <linux/spi/spi.h> 31 */ 32 33 #define SPI_CPHA 0x01 34 #define SPI_CPOL 0x02 35 36 #define SPI_MODE_0 (0|0) 37 #define SPI_MODE_1 (0|SPI_CPHA) 38 #define SPI_MODE_2 (SPI_CPOL|0) 39 #define SPI_MODE_3 (SPI_CPOL|SPI_CPHA) 40 41 #define SPI_CS_HIGH 0x04 42 #define SPI_LSB_FIRST 0x08 43 #define SPI_3WIRE 0x10 44 #define SPI_LOOP 0x20 45 #define SPI_NO_CS 0x40 46 #define SPI_READY 0x80 47 #define SPI_TX_DUAL 0x100 48 #define SPI_TX_QUAD 0x200 49 #define SPI_RX_DUAL 0x400 50 #define SPI_RX_QUAD 0x800 51 52 /*---------------------------------------------------------------------------*/ 53 54 /* IOCTL commands */ 55 56 #define SPI_IOC_MAGIC 'k' 57 58 /** 59 * struct spi_ioc_transfer - describes a single SPI transfer 60 * @tx_buf: Holds pointer to userspace buffer with transmit data, or null. 61 * If no data is provided, zeroes are shifted out. 62 * @rx_buf: Holds pointer to userspace buffer for receive data, or null. 63 * @len: Length of tx and rx buffers, in bytes. 64 * @speed_hz: Temporary override of the device's bitrate. 65 * @bits_per_word: Temporary override of the device's wordsize. 66 * @delay_usecs: If nonzero, how long to delay after the last bit transfer 67 * before optionally deselecting the device before the next transfer. 68 * @cs_change: True to deselect device before starting the next transfer. 69 * 70 * This structure is mapped directly to the kernel spi_transfer structure; 71 * the fields have the same meanings, except of course that the pointers 72 * are in a different address space (and may be of different sizes in some 73 * cases, such as 32-bit i386 userspace over a 64-bit x86_64 kernel). 74 * Zero-initialize the structure, including currently unused fields, to 75 * accommodate potential future updates. 76 * 77 * SPI_IOC_MESSAGE gives userspace the equivalent of kernel spi_sync(). 78 * Pass it an array of related transfers, they'll execute together. 79 * Each transfer may be half duplex (either direction) or full duplex. 80 * 81 * struct spi_ioc_transfer mesg[4]; 82 * ... 83 * status = ioctl(fd, SPI_IOC_MESSAGE(4), mesg); 84 * 85 * So for example one transfer might send a nine bit command (right aligned 86 * in a 16-bit word), the next could read a block of 8-bit data before 87 * terminating that command by temporarily deselecting the chip; the next 88 * could send a different nine bit command (re-selecting the chip), and the 89 * last transfer might write some register values. 90 */ 91 struct spi_ioc_transfer { 92 __u64 tx_buf; 93 __u64 rx_buf; 94 95 __u32 len; 96 __u32 speed_hz; 97 98 __u16 delay_usecs; 99 __u8 bits_per_word; 100 __u8 cs_change; 101 __u8 tx_nbits; 102 __u8 rx_nbits; 103 __u16 pad; 104 105 /* If the contents of 'struct spi_ioc_transfer' ever change 106 * incompatibly, then the ioctl number (currently 0) must change; 107 * ioctls with constant size fields get a bit more in the way of 108 * error checking than ones (like this) where that field varies. 109 * 110 * NOTE: struct layout is the same in 64bit and 32bit userspace. 111 */ 112 }; 113 114 /* not all platforms use <asm-generic/ioctl.h> or _IOC_TYPECHECK() ... */ 115 #define SPI_MSGSIZE(N) \ 116 ((((N)*(sizeof (struct spi_ioc_transfer))) < (1 << _IOC_SIZEBITS)) \ 117 ? ((N)*(sizeof (struct spi_ioc_transfer))) : 0) 118 #define SPI_IOC_MESSAGE(N) _IOW(SPI_IOC_MAGIC, 0, char[SPI_MSGSIZE(N)]) 119 120 121 /* Read / Write of SPI mode (SPI_MODE_0..SPI_MODE_3) (limited to 8 bits) */ 122 #define SPI_IOC_RD_MODE _IOR(SPI_IOC_MAGIC, 1, __u8) 123 #define SPI_IOC_WR_MODE _IOW(SPI_IOC_MAGIC, 1, __u8) 124 125 /* Read / Write SPI bit justification */ 126 #define SPI_IOC_RD_LSB_FIRST _IOR(SPI_IOC_MAGIC, 2, __u8) 127 #define SPI_IOC_WR_LSB_FIRST _IOW(SPI_IOC_MAGIC, 2, __u8) 128 129 /* Read / Write SPI device word length (1..N) */ 130 #define SPI_IOC_RD_BITS_PER_WORD _IOR(SPI_IOC_MAGIC, 3, __u8) 131 #define SPI_IOC_WR_BITS_PER_WORD _IOW(SPI_IOC_MAGIC, 3, __u8) 132 133 /* Read / Write SPI device default max speed hz */ 134 #define SPI_IOC_RD_MAX_SPEED_HZ _IOR(SPI_IOC_MAGIC, 4, __u32) 135 #define SPI_IOC_WR_MAX_SPEED_HZ _IOW(SPI_IOC_MAGIC, 4, __u32) 136 137 /* Read / Write of the SPI mode field */ 138 #define SPI_IOC_RD_MODE32 _IOR(SPI_IOC_MAGIC, 5, __u32) 139 #define SPI_IOC_WR_MODE32 _IOW(SPI_IOC_MAGIC, 5, __u32) 140 141 142 143 #endif /* SPIDEV_H */ 144