Searched refs:values (Results 1 – 25 of 301) sorted by relevance
12345678910>>...13
| /toolchain/binutils/binutils-2.27/gas/testsuite/gas/elf/ |
| D | bignums.s | 3 # On a 64-bit host the two values below will be read into a simple
9 # Note - some targets place .hword values on a 16-bit boundary, so we
16 # Check that on 64-bit hosts real bignum values also work.
|
| D | section10.s | 1 # Test numeric values for the section's flags field.
35 # FIXME: We ought to check setting 64-bit flag values for 64-bit ELF targets...
|
| D | bignums.d | 2 #name: bignum byte values
|
| /toolchain/binutils/binutils-2.27/ld/testsuite/ld-mips-elf/ |
| D | got-page-4b.s | 4 # Create page references to 16 values. The layout of the values
|
| D | dyn-sec64.d | 1 #name: objdump -p print 64-bit values
|
| D | got-page-4a.s | 4 # Add the 16 values that the next input file wants, but in such
|
| /toolchain/binutils/binutils-2.27/gas/testsuite/gas/tic6x/ |
| D | reloc-bad-3.s | 1 # Test relocation overflow and insufficiently divisible values. Note
2 # that divisibility checks for constant values are only applicable to
3 # load and store offsets, not ADDA, because constant values are
|
| /toolchain/binutils/binutils-2.27/gas/testsuite/gas/arc/ |
| D | mov.s | 7 # shimm values
15 # limm values
|
| /toolchain/binutils/binutils-2.27/gas/testsuite/gas/frv/ |
| D | immediates.d | 3 #name: Parsing immediate values
|
| /toolchain/binutils/binutils-2.27/ld/testsuite/ld-arm/ |
| D | attr-merge-wchar-42.d | 5 …s 2-byte wchar_t yet the output is to use 4-byte wchar_t; use of wchar_t values across objects may…
|
| D | attr-merge-wchar-24.d | 5 …s 4-byte wchar_t yet the output is to use 2-byte wchar_t; use of wchar_t values across objects may…
|
| /toolchain/binutils/binutils-2.27/zlib/doc/ |
| D | rfc1951.txt | 378 consecutive values, in the same order as the symbols
435 3) Assign numerical values to all codes, using consecutive
436 values for all codes of the same length with the base
437 values determined at step 2. Codes that are never used
468 Step 2 computes the following next_code values:
477 Step 3 produces the following code values:
570 position; for example, if the last 2 bytes decoded have values
594 byte values (0..255), or <length, backward distance> pairs,
598 values 0..255 represent literal bytes, the value 256 indicates
599 end-of-block, and values 257..285 represent length codes
[all …]
|
| /toolchain/binutils/binutils-2.27/gas/testsuite/gas/i386/ |
| D | avx512f-nondef.d | 3 #name: i386 AVX512F insns with nondefault values in ignored bits
|
| D | x86-64-avx512f-nondef.d | 3 #name: x86-64 AVX512F insns with nondefault values in ignored bits
|
| /toolchain/binutils/binutils-2.27/gas/testsuite/gas/sh/sh64/ |
| D | err-3.s | 6 ! operands, and no errors for nearby valid values.
|
| /toolchain/binutils/binutils-2.27/config/ |
| D | inttypes-pri.m4 | 12 # macros to non-string values. This is the case on AIX 4.3.3.
|
| D | lib-prefix.m4 | 121 dnl acl_final_exec_prefix, containing the values to which $prefix and
144 dnl variables prefix and exec_prefix bound to the values they will have
|
| /toolchain/binutils/binutils-2.27/cpu/ |
| D | simplify.inc | 92 indices values handlers)
95 indices values handlers () () ())
105 ; Simpler version of dnh that leaves out the indices, values, handlers,
|
| D | ip2k.cpu | 199 (values
630 ; Separate the 16 bit values into the H and L regs
694 ; Separate the 16 bit values into the H and L regs
753 ; Separate the 16 bit values into the H and L regs
847 ; Separate the 16 bit values into the H and L regs
956 ; Separate the 16 bit values into the H and L regs
999 ; Separate the 16 bit values into the H and L regs
1200 ; Separate the 16 bit values into the H and L regs
1243 ; Separate the 16 bit values into the H and L regs
|
| /toolchain/binutils/binutils-2.27/ld/testsuite/ld-cris/ |
| D | tls-e-tpiecomm1.d | 8 # symbols and that the values entered in the GOT are right.
|
| D | tls-err-67.d | 8 # explanations with default values when bailing out and omitting
|
| /toolchain/binutils/binutils-2.27/gas/doc/ |
| D | c-aarch64.texi | 261 Select the target architecture. Valid values for @var{name} are the same as
270 values for @var{name} are the same as those accepted as architectural
286 Set the target processor. Valid values for @var{name} are the same as
293 The @code{.dword} directive produces 64 bit values.
392 The @code{.xword} directive produces 64 bit values. This is the same
|
| D | c-arm.texi | 359 The following values are recognized:
369 The following values are recognized:
599 These directives write 2, 4 or 8 byte values to the output section.
610 Select the target architecture. Valid values for @var{name} are the same as
619 values for @var{name} are the same as those accepted as architectural
649 Select the target processor. Valid values for @var{name} are the same as
717 Note - the following legacy values are also accepted by @var{tag}:
729 These directives write 12byte long double floating-point values to the
757 Select the floating-point unit to assemble for. Valid values for @var{name}
817 Valid values for @var{name} are the same as for the @code{.arch} directive.
[all …]
|
| /toolchain/binutils/binutils-2.27/bfd/doc/ |
| D | doc.str | 124 "Here are the possible values for @code{enum "
|
| /toolchain/binutils/binutils-2.27/binutils/ |
| D | ChangeLog-9899 | 62 (dump_relocations): Use print_vma to display bfd_vma values.
63 (process_file_header): Use print_vma to display bfd_vma values.
64 (process_program_headers): Use print_vma to display bfd_vma values.
65 (process_section_headers): Use print_vma to display bfd_vma values.
66 (dynamic_segment_parisc_val): Use print_vma to display bfd_vma values.
67 (process_dynamic_segment): Use print_vma to display bfd_vma values.
68 (process_symbol_table): Use print_vma to display bfd_vma values.
69 (process_mips_specific): Use print_vma to display bfd_vma values.
100 * dlltool.c (flush_page): Clip short values to prevent warnings
156 * readelf.c (get_parisc_dynamic_type): Handle DT_HP_GST_* values.
[all …]
|
12345678910>>...13