1dnl Process this file with autoconf to produce a configure script. 2dnl 3dnl And be careful when changing it! If you must add tests with square 4dnl brackets, be sure changequote invocations surround it. 5dnl 6dnl Copyright (C) 2012-2016 Free Software Foundation, Inc. 7dnl 8dnl This file is free software; you can redistribute it and/or modify 9dnl it under the terms of the GNU General Public License as published by 10dnl the Free Software Foundation; either version 3 of the License, or 11dnl (at your option) any later version. 12dnl 13dnl This program is distributed in the hope that it will be useful, 14dnl but WITHOUT ANY WARRANTY; without even the implied warranty of 15dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16dnl GNU General Public License for more details. 17dnl 18dnl You should have received a copy of the GNU General Public License 19dnl along with this program; see the file COPYING3. If not see 20dnl <http://www.gnu.org/licenses/>. 21dnl 22dnl v2.5 needed for --bindir et al 23AC_PREREQ(2.59) 24m4_include([../bfd/version.m4]) 25AC_INIT([gas], BFD_VERSION) 26AC_CONFIG_SRCDIR(as.h) 27 28dnl Autoconf 2.57 will find the aux dir without this. However, unless 29dnl we specify this explicitly, automake-1.7 will assume that ylwrap is in 30dnl gas/ instead of gas/../. 31AC_CONFIG_AUX_DIR(..) 32AC_CANONICAL_TARGET 33AC_ISC_POSIX 34 35AM_INIT_AUTOMAKE 36 37AC_PROG_CC 38AC_GNU_SOURCE 39AC_USE_SYSTEM_EXTENSIONS 40 41LT_INIT 42ACX_LARGEFILE 43 44AC_ARG_ENABLE(targets, 45[ --enable-targets alternative target configurations besides the primary], 46[case "${enableval}" in 47 yes | "") AC_MSG_ERROR(enable-targets option must specify target names or 'all') 48 ;; 49 no) enable_targets= ;; 50 *) enable_targets=$enableval ;; 51esac])dnl 52 53ac_checking=yes 54if grep '^RELEASE=y' ${srcdir}/../bfd/Makefile.am >/dev/null 2>/dev/null ; then 55 ac_checking= 56fi 57AC_ARG_ENABLE(checking, 58[ --enable-checking enable run-time checks], 59[case "${enableval}" in 60 no|none) ac_checking= ;; 61 *) ac_checking=yes ;; 62esac])dnl 63if test x$ac_checking != x ; then 64 AC_DEFINE(ENABLE_CHECKING, 1, [Define if you want run-time sanity checks.]) 65fi 66 67# PR gas/19109 68# Decide the default method for compressing debug sections. 69ac_default_compressed_debug_sections=unset 70# Provide a configure time option to override our default. 71AC_ARG_ENABLE(compressed_debug_sections, 72 AS_HELP_STRING([--enable-compressed-debug-sections={all,gas,none}], 73 [compress debug sections by default]), 74[case ,"${enableval}", in 75 ,yes, | ,all, | *,gas,*) ac_default_compressed_debug_sections=yes ;; 76 ,no, | ,none,) ac_default_compressed_debug_sections=no ;; 77 *) ac_default_compressed_debug_sections=unset ;; 78esac])dnl 79 80# PR gas/19520 81# Decide if x86 assembler should generate relax relocations. 82ac_default_x86_relax_relocations=unset 83# Provide a configure time option to override our default. 84AC_ARG_ENABLE(x86_relax_relocations, 85 AS_HELP_STRING([--enable-x86-relax-relocations], 86 [generate x86 relax relocations by default]), 87[case "${enableval}" in 88 no) ac_default_x86_relax_relocations=0 ;; 89esac])dnl 90 91# Decide if ELF assembler should generate common symbols with the 92# STT_COMMON type. 93ac_default_elf_stt_common=unset 94# Provide a configure time option to override our default. 95AC_ARG_ENABLE(elf_stt_common, 96 AS_HELP_STRING([--enable-elf-stt-common], 97 [generate ELF common symbols with STT_COMMON type by default]), 98[case "${enableval}" in 99 yes) ac_default_elf_stt_common=1 ;; 100esac])dnl 101 102using_cgen=no 103 104AM_BINUTILS_WARNINGS 105 106# Generate a header file 107AC_CONFIG_HEADERS(config.h:config.in) 108 109dnl Option --with-cpu=TYPE allows configure type control of the default 110dnl cpu type within the assembler. Currently only the ARC target 111dnl supports this feature, but others may be added in the future. 112AC_ARG_WITH(cpu, 113 AS_HELP_STRING([--with-cpu=CPU], 114 [default cpu variant is CPU (currently only supported on ARC)]), 115 [AC_DEFINE_UNQUOTED(TARGET_WITH_CPU, 116 "${with_cpu}", 117 [Target specific CPU.])], 118 []) 119 120# PR 14072 121AH_VERBATIM([00_CONFIG_H_CHECK], 122[/* Check that config.h is #included before system headers 123 (this works only for glibc, but that should be enough). */ 124#if defined(__GLIBC__) && !defined(__FreeBSD_kernel__) && !defined(__CONFIG_H__) 125# error config.h must be #included before system headers 126#endif 127#define __CONFIG_H__ 1]) 128 129# If we are on a DOS filesystem, we must use gdb.ini rather than 130# .gdbinit. 131case "${host}" in 132 *-*-msdos* | *-*-go32* | *-*-mingw32* | *-*-windows*) 133 GDBINIT="gdb.ini" 134 AC_CONFIG_FILES(gdb.ini:gdbinit.in) 135 ;; 136 *) 137 GDBINIT=".gdbinit" 138 AC_CONFIG_FILES(.gdbinit:gdbinit.in) 139 ;; 140esac 141AC_SUBST(GDBINIT) 142 143#We need this for the host. BOUT header is in host order. 144AC_C_BIGENDIAN 145 146te_file=generic 147 148# Makefile target for installing gas in $(tooldir)/bin. 149install_tooldir=install-exec-tooldir 150 151canon_targets="" 152all_targets=no 153if test -n "$enable_targets" ; then 154 for t in `echo $enable_targets | sed 's/,/ /g'`; do 155 if test $t = "all"; then 156 all_targets=yes 157 continue 158 fi 159 result=`$ac_config_sub $t 2>/dev/null` 160 if test -n "$result" ; then 161 canon_targets="$canon_targets $result" 162# else 163# # Permit "all", etc. We don't support it yet though. 164# canon_targets="$canon_targets $t" 165 fi 166 done 167 GAS_UNIQ(canon_targets) 168fi 169 170emulations="" 171 172for this_target in $target $canon_targets ; do 173 174 targ=${this_target} 175 . ${srcdir}/configure.tgt 176 177 case ${target_cpu} in 178 crisv32) 179 AC_DEFINE_UNQUOTED(DEFAULT_CRIS_ARCH, $arch, 180 [Default CRIS architecture.]) 181 ;; 182 esac 183 184 if test ${this_target} = $target ; then 185 target_cpu_type=${cpu_type} 186 elif test ${target_cpu_type} != ${cpu_type} ; then 187 continue 188 fi 189 190 generic_target=${cpu_type}-${target_vendor}-${target_os} 191 case ${generic_target} in 192 i386-*-sco3.2v5*) 193 if test ${this_target} = $target; then 194 AC_DEFINE(SCO_ELF, 1, [Define if defaulting to ELF on SCO 5.]) 195 fi 196 ;; 197 198 i386-*-msdosdjgpp* \ 199 | i386-*-go32* \ 200 | i386-go32-rtems*) 201 AC_DEFINE(STRICTCOFF, 1, [Using strict COFF?]) 202 ;; 203 204 i386-*-solaris2 \ 205 | x86_64-*-solaris2 \ 206 | i386-*-solaris2.[[0-9]] \ 207 | i386-*-solaris2.1[[01]] \ 208 | x86_64-*-solaris2.1[[01]]) 209 if test ${this_target} = $target \ 210 && test ${ac_default_x86_relax_relocations} = unset; then 211 ac_default_x86_relax_relocations=0 212 fi 213 ;; 214 215 i860-*-*) 216 AC_MSG_WARN(GAS support for ${generic_target} is preliminary and a work in progress) 217 ;; 218 219 microblaze*) 220 ;; 221 222changequote(,)dnl 223 ppc-*-aix[5-9].*) 224changequote([,])dnl 225 AC_DEFINE(AIX_WEAK_SUPPORT, 1, 226 [Define if using AIX 5.2 value for C_WEAKEXT.]) 227 ;; 228 ppc-*-solaris*) 229 if test ${this_target} = $target; then 230 AC_DEFINE(TARGET_SOLARIS_COMMENT, 1, 231 [Define if default target is PowerPC Solaris.]) 232 fi 233 if test x${endian} = xbig; then 234 AC_MSG_ERROR(Solaris must be configured little endian) 235 fi 236 ;; 237 238 sh*-*-symbianelf*) 239 AC_DEFINE(TARGET_SYMBIAN, 1, [Define if target is Symbian OS.]) 240 ;; 241 esac 242 243 if test ${this_target} = $target ; then 244 endian_def= 245 if test x${endian} = xbig; then 246 endian_def=1 247 elif test x${endian} = xlittle; then 248 endian_def=0 249 fi 250 if test x${endian_def} != x; then 251 AC_DEFINE_UNQUOTED(TARGET_BYTES_BIG_ENDIAN, $endian_def, 252 [Define as 1 if big endian.]) 253 fi 254 fi 255 256# Other random stuff. 257 258 case ${cpu_type} in 259 mips) 260 # Set mips_cpu to the name of the default CPU. 261 case ${target_cpu} in 262 mips | mipsbe | mipseb | mipsle | mipsel | mips64 | mips64el) 263 mips_cpu=from-abi 264 ;; 265 mipsisa32 | mipsisa32el) 266 mips_cpu=mips32 267 ;; 268 mipsisa32r2 | mipsisa32r2el) 269 mips_cpu=mips32r2 270 ;; 271 mipsisa32r3 | mipsisa32r3el) 272 mips_cpu=mips32r3 273 ;; 274 mipsisa32r5 | mipsisa32r5el) 275 mips_cpu=mips32r5 276 ;; 277 mipsisa32r6 | mipsisa32r6el) 278 mips_cpu=mips32r6 279 ;; 280 mipsisa64 | mipsisa64el) 281 mips_cpu=mips64 282 ;; 283 mipsisa64r2 | mipsisa64r2el) 284 mips_cpu=mips64r2 285 ;; 286 mipsisa64r3 | mipsisa64r3el) 287 mips_cpu=mips64r3 288 ;; 289 mipsisa64r5 | mipsisa64r5el) 290 mips_cpu=mips64r5 291 ;; 292 mipsisa64r6 | mipsisa64r6el) 293 mips_cpu=mips64r6 294 ;; 295 mipstx39 | mipstx39el) 296 mips_cpu=r3900 297 ;; 298 mips64vr | mips64vrel) 299 mips_cpu=vr4100 300 ;; 301 mipsisa32r2* | mipsisa64r2*) 302changequote(,)dnl 303 mips_cpu=`echo $target_cpu | sed -e 's/[a-z]*..r2//' -e 's/el$//'` 304changequote([,])dnl 305 ;; 306 mipsisa32r6* | mipsisa64r6*) 307changequote(,)dnl 308 mips_cpu=`echo $target_cpu | sed -e 's/[a-z]*..r6//' -e 's/el$//'` 309changequote([,])dnl 310 ;; 311 mips64* | mipsisa64* | mipsisa32*) 312changequote(,)dnl 313 mips_cpu=`echo $target_cpu | sed -e 's/[a-z]*..//' -e 's/el$//'` 314changequote([,])dnl 315 ;; 316 mips*) 317changequote(,)dnl 318 mips_cpu=`echo $target_cpu | sed -e 's/^mips//' -e 's/el$//'` 319changequote([,])dnl 320 ;; 321 *) 322 AC_MSG_ERROR($target_cpu isn't a supported MIPS CPU name) 323 ;; 324 esac 325 # See whether it's appropriate to set E_MIPS_ABI_O32 for o32 326 # binaries. It's a GNU extension that some OSes don't understand. 327 case ${target} in 328 *-*-irix*) 329 use_e_mips_abi_o32=0 330 ;; 331 *) 332 use_e_mips_abi_o32=1 333 ;; 334 esac 335 # Decide whether to generate 32-bit or 64-bit code by default. 336 # Used to resolve -march=from-abi when an embedded ABI is selected. 337 case ${target} in 338 mips64*-*-* | mipsisa64*-*-*) 339 mips_default_64bit=1 340 ;; 341 *) 342 mips_default_64bit=0 343 ;; 344 esac 345 # Decide which ABI to target by default. 346 case ${target} in 347 mips64*-linux* | mips-sgi-irix6* | mips64*-freebsd* | mips64*-kfreebsd*-gnu) 348 mips_default_abi=N32_ABI 349 ;; 350 mips*-linux* | mips*-freebsd* | mips*-kfreebsd*-gnu) 351 mips_default_abi=O32_ABI 352 ;; 353 mips64*-openbsd*) 354 mips_default_abi=N64_ABI 355 ;; 356 *) 357 mips_default_abi=NO_ABI 358 ;; 359 esac 360 AC_DEFINE_UNQUOTED(MIPS_CPU_STRING_DEFAULT, "$mips_cpu", 361 [Default CPU for MIPS targets. ]) 362 AC_DEFINE_UNQUOTED(USE_E_MIPS_ABI_O32, $use_e_mips_abi_o32, 363 [Allow use of E_MIPS_ABI_O32 on MIPS targets. ]) 364 AC_DEFINE_UNQUOTED(MIPS_DEFAULT_64BIT, $mips_default_64bit, 365 [Generate 64-bit code by default on MIPS targets. ]) 366 AC_DEFINE_UNQUOTED(MIPS_DEFAULT_ABI, $mips_default_abi, 367 [Choose a default ABI for MIPS targets. ]) 368 ;; 369 esac 370 371 # Do we need the opcodes library? 372 case ${cpu_type} in 373 vax | tic30) 374 ;; 375 376 *) 377 need_opcodes=yes 378 379 case "${enable_shared}" in 380 yes) shared_opcodes=true ;; 381 *opcodes*) shared_opcodes=true ;; 382 *) shared_opcodes=false ;; 383 esac 384 ;; 385 esac 386 387 # Any other special object files needed ? 388 case ${cpu_type} in 389 390 bfin) 391 echo ${extra_objects} | grep -s "bfin-parse.o" 392 if test $? -ne 0 ; then 393 extra_objects="$extra_objects bfin-parse.o" 394 fi 395 396 echo ${extra_objects} | grep -s "bfin-lex-wrapper.o" 397 if test $? -ne 0 ; then 398 extra_objects="$extra_objects bfin-lex-wrapper.o" 399 fi 400 ;; 401 402 epiphany | fr30 | ip2k | iq2000 | lm32 | m32r | or1k) 403 using_cgen=yes 404 ;; 405 406 m32c) 407 using_cgen=yes 408 ;; 409 frv) 410 using_cgen=yes 411 ;; 412 m68k) 413 case ${extra_objects} in 414 *m68k-parse.o*) ;; 415 *) extra_objects="$extra_objects m68k-parse.o" ;; 416 esac 417 ;; 418 419 mep) 420 using_cgen=yes 421 ;; 422 423 mips) 424 echo ${extra_objects} | grep -s "itbl-parse.o" 425 if test $? -ne 0 ; then 426 extra_objects="$extra_objects itbl-parse.o" 427 fi 428 429 echo ${extra_objects} | grep -s "itbl-lex-wrapper.o" 430 if test $? -ne 0 ; then 431 extra_objects="$extra_objects itbl-lex-wrapper.o" 432 fi 433 434 echo ${extra_objects} | grep -s "itbl-ops.o" 435 if test $? -ne 0 ; then 436 extra_objects="$extra_objects itbl-ops.o" 437 fi 438 ;; 439 440 mt) 441 using_cgen=yes 442 ;; 443 444 nds32) 445 # Decide BASELINE, REDUCED_REGS, FPU_DP_EXT, FPU_SP_EXT features 446 # based on arch_name. 447 AC_MSG_CHECKING(for default configuration of --with-arch) 448 if test "x${with_arch}" != x; then 449 case ${with_arch} in 450 v2j | v2s | v2f | v2 | v3m | v3j | v3s | v3f | v3 ) 451 AC_DEFINE_UNQUOTED(NDS32_DEFAULT_ARCH_NAME, "$with_arch", 452 [Define value for nds32_arch_name]) 453 ;; 454 *) 455 AC_MSG_ERROR(This kind of arch name does *NOT* exist!) 456 ;; 457 esac 458 fi 459 AC_MSG_RESULT($with_arch) 460 461 # Decide features one by one. 462 AC_MSG_CHECKING(for default configuration of --enable-dx-regs) 463 if test "x${enable_dx_regs}" = xyes; then 464 AC_DEFINE(NDS32_DEFAULT_DX_REGS, 1, 465 [Define value for nds32_dx_regs]) 466 else 467 AC_DEFINE(NDS32_DEFAULT_DX_REGS, 0, 468 [Define default value for nds32_dx_regs]) 469 fi 470 AC_MSG_RESULT($enable_dx_regs) 471 472 AC_MSG_CHECKING(for default configuration of --enable-perf-ext) 473 if test "x${enable_perf_ext}" = xno; then 474 AC_DEFINE(NDS32_DEFAULT_PERF_EXT, 0, 475 [Define value for nds32_perf_ext]) 476 else 477 AC_DEFINE(NDS32_DEFAULT_PERF_EXT, 1, 478 [Define default value for nds32_perf_ext]) 479 fi 480 AC_MSG_RESULT($enable_perf_ext) 481 482 AC_MSG_CHECKING(for default configuration of --enable-perf-ext2) 483 if test "x${enable_perf_ext2}" = xno; then 484 AC_DEFINE(NDS32_DEFAULT_PERF_EXT2, 0, 485 [Define value for nds32_perf_ext2]) 486 else 487 AC_DEFINE(NDS32_DEFAULT_PERF_EXT2, 1, 488 [Define default value for nds32_perf_ext2]) 489 fi 490 AC_MSG_RESULT($enable_perf_ext2) 491 492 AC_MSG_CHECKING(for default configuration of --enable-string-ext) 493 if test "x${enable_string_ext}" = xno; then 494 AC_DEFINE(NDS32_DEFAULT_STRING_EXT, 0, 495 [Define value for nds32_string_ext]) 496 else 497 AC_DEFINE(NDS32_DEFAULT_STRING_EXT, 1, 498 [Define default value for nds32_string_ext]) 499 fi 500 AC_MSG_RESULT($enable_string_ext) 501 502 AC_MSG_CHECKING(for default configuration of --enable-audio-ext) 503 if test "x${enable_audio_ext}" = xno; then 504 AC_DEFINE(NDS32_DEFAULT_AUDIO_EXT, 0, 505 [Define value for nds32_audio_ext]) 506 else 507 AC_DEFINE(NDS32_DEFAULT_AUDIO_EXT, 1, 508 [Define default value for nds32_audio_ext]) 509 fi 510 AC_MSG_RESULT($enable_audio_ext) 511 ;; 512 513 i386 | s390 | sparc) 514 if test $this_target = $target ; then 515 AC_DEFINE_UNQUOTED(DEFAULT_ARCH, "${arch}", [Default architecture.]) 516 fi 517 ;; 518 519 rl78) 520 echo ${extra_objects} | grep -s "rl78-parse.o" 521 if test $? -ne 0 ; then 522 extra_objects="$extra_objects rl78-parse.o" 523 fi 524 ;; 525 526 rx) 527 echo ${extra_objects} | grep -s "rx-parse.o" 528 if test $? -ne 0 ; then 529 extra_objects="$extra_objects rx-parse.o" 530 fi 531 ;; 532 533 xstormy16) 534 using_cgen=yes 535 ;; 536 537 xc16x) 538 using_cgen=yes 539 ;; 540 541 xtensa) 542 echo ${extra_objects} | grep -s "xtensa-relax.o" 543 if test $? -ne 0 ; then 544 extra_objects="$extra_objects xtensa-relax.o" 545 fi 546 ;; 547 548 *) 549 ;; 550 esac 551 552 if test $using_cgen = yes ; then 553 case "x${extra_objects}" in 554 *cgen.o*) ;; 555 *) extra_objects="$extra_objects cgen.o" ;; 556 esac 557 fi 558 559# See if we really can support this configuration with the emulation code. 560 561 if test $this_target = $target ; then 562 obj_format=$fmt 563 te_file=$em 564 fi 565 566 case ${te_file} in 567 vms) extra_objects="$extra_objects te-vms.o" ;; 568 esac 569 570# From target name and format, produce a list of supported emulations. 571 572 case ${generic_target}-${fmt} in 573 mips-*-*-*) case "$endian" in 574 big) emulation="mipsbelf mipslelf mipself" ;; 575 *) emulation="mipslelf mipsbelf mipself" ;; 576 esac ;; 577 # i386-pc-pe-coff != i386-pc-coff. 578 i386-*-pe-coff) ;; 579 # Uncommenting the next line will turn on support for i386 AOUT 580 # for the default linux configuration 581 # i386-*-linux*-elf) emulation="i386elf i386aout" ;; 582 # 583 i386-*-aout) emulation="i386aout" ;; 584 i386-*-coff) emulation="i386coff" ;; 585 i386-*-elf) emulation="i386elf" ;; 586 587 # Always all formats. The first stated emulation becomes the default. 588 cris-*-*aout*) emulation="crisaout criself" ;; 589 cris-*-*) emulation="criself crisaout" ;; 590 esac 591 592 emulations="$emulations $emulation" 593 594done 595 596if test ${ac_default_x86_relax_relocations} = unset; then 597 ac_default_x86_relax_relocations=1 598fi 599AC_DEFINE_UNQUOTED(DEFAULT_GENERATE_X86_RELAX_RELOCATIONS, 600 $ac_default_x86_relax_relocations, 601 [Define to 1 if you want to generate x86 relax relocations by default.]) 602 603if test ${ac_default_elf_stt_common} = unset; then 604 ac_default_elf_stt_common=0 605fi 606AC_DEFINE_UNQUOTED(DEFAULT_GENERATE_ELF_STT_COMMON, 607 $ac_default_elf_stt_common, 608 [Define to 1 if you want to generate ELF common symbols with the 609 STT_COMMON type by default.]) 610 611if test x$ac_default_compressed_debug_sections = xyes ; then 612 AC_DEFINE(DEFAULT_FLAG_COMPRESS_DEBUG, 1, [Define if you want compressed debug sections by default.]) 613fi 614 615# Turn on all targets if possible 616if test ${all_targets} = "yes"; then 617 case ${target_cpu_type} in 618 i386) 619 case ${obj_format} in 620 aout) 621 emulations="$emulations i386coff i386elf" 622 ;; 623 coff) 624 emulations="$emulations i386aout i386elf" 625 ;; 626 elf) 627 emulations="$emulations i386aout i386coff" 628 ;; 629 esac 630 ;; 631 x86_64) 632 case ${obj_format} in 633 aout) 634 emulations="$emulations i386coff i386elf" 635 ;; 636 coff) 637 emulations="$emulations i386aout i386elf" 638 ;; 639 elf) 640 emulations="$emulations i386aout i386coff" 641 ;; 642 esac 643 ;; 644 esac 645fi 646 647# PE code has way too many macros tweaking behaviour 648case ${te_file} in 649 pe*) emulations="" ;; 650esac 651 652# Assign floating point type. Most processors with FP support 653# IEEE FP. On those that don't support FP at all, usually IEEE 654# is emulated. 655case ${target_cpu} in 656 vax | pdp11 ) atof=vax ;; 657 *) atof=ieee ;; 658esac 659 660case "${obj_format}" in 661 "") AC_MSG_ERROR(GAS does not know what format to use for target ${target}) ;; 662esac 663 664# Unfortunately the cpu in cpu-opc.h file isn't always $(TARGET_CPU). 665cgen_cpu_prefix="" 666if test $using_cgen = yes ; then 667 case ${target_cpu} in 668 or1knd) 669 cgen_cpu_prefix=or1k ;; 670 *) cgen_cpu_prefix=${target_cpu} ;; 671 esac 672 AC_SUBST(cgen_cpu_prefix) 673 AC_DEFINE(USING_CGEN, 1, [Using cgen code?]) 674fi 675 676dnl 677dnl Make sure the desired support files exist. 678dnl 679 680if test ! -r ${srcdir}/config/tc-${target_cpu_type}.c; then 681 AC_MSG_ERROR(GAS does not support target CPU ${target_cpu_type}) 682fi 683 684if test ! -r ${srcdir}/config/obj-${obj_format}.c; then 685 AC_MSG_ERROR(GAS does not have support for object file format ${obj_format}) 686fi 687 688# Some COFF configurations want these random other flags set. 689case ${obj_format} in 690 coff) 691 case ${target_cpu_type} in 692 i386) AC_DEFINE(I386COFF, 1, [Using i386 COFF?]) ;; 693 m68k) AC_DEFINE(M68KCOFF, 1, [Using m68k COFF?]) ;; 694 m88k) AC_DEFINE(M88KCOFF, 1, [Using m88k COFF?]) ;; 695 x86_64) AC_DEFINE(I386COFF, 1, [Using i386 COFF?]) ;; 696 esac 697 ;; 698esac 699 700# Getting this done right is going to be a bitch. Each configuration specified 701# with --enable-targets=... should be checked for environment, format, cpu 702# setting. 703# 704# For each configuration, the necessary object file support code must be linked 705# in. This might be only one, it might be up to four. The necessary emulation 706# code needs to be provided, too. 707# 708# And then there's "--enable-targets=all".... 709# 710# For now, just always do it for MIPS ELF configurations. Sigh. 711 712formats="${obj_format}" 713emfiles="" 714EMULATIONS="" 715GAS_UNIQ(emulations) 716for em in . $emulations ; do 717 case $em in 718 .) continue ;; 719 mipsbelf | mipslelf | mipself) 720 fmt=elf file=mipself ;; 721 *coff) 722 fmt=coff file=$em ;; 723 *aout) 724 fmt=aout file=$em ;; 725 *elf) 726 fmt=elf file=$em ;; 727 esac 728 formats="$formats $fmt" 729 emfiles="$emfiles e-$file.o" 730 EMULATIONS="$EMULATIONS &$em," 731done 732GAS_UNIQ(formats) 733GAS_UNIQ(emfiles) 734if test `set . $formats ; shift ; echo $#` -gt 1 ; then 735 for fmt in $formats ; do 736 case $fmt in 737 aout) AC_DEFINE(OBJ_MAYBE_AOUT, 1, [a.out support?]) ;; 738 bout) AC_DEFINE(OBJ_MAYBE_BOUT, 1, [b.out support?]) ;; 739 coff) AC_DEFINE(OBJ_MAYBE_COFF, 1, [COFF support?]) ;; 740 ecoff) AC_DEFINE(OBJ_MAYBE_ECOFF, 1, [ECOFF support?]) ;; 741 elf) AC_DEFINE(OBJ_MAYBE_ELF, 1, [ELF support?]) ;; 742 generic) AC_DEFINE(OBJ_MAYBE_GENERIC, 1, [generic support?]) ;; 743 som) AC_DEFINE(OBJ_MAYBE_SOM, 1, [SOM support?]) ;; 744 esac 745 extra_objects="$extra_objects obj-$fmt.o" 746 done 747 obj_format=multi 748fi 749if test `set . $emfiles ; shift ; echo $#` -gt 0 ; then 750 DEFAULT_EMULATION=`set . $emulations ; echo $2` 751 # e-mipself has more than one emulation per file, e-i386* has just one at the 752 # moment. If only one emulation is specified, then don't define 753 # USE_EMULATIONS or include any of the e-files as they will only be bloat. 754 case "${obj_format}${emfiles}" in 755 multi* | *mipself*) 756 extra_objects="$extra_objects $emfiles" 757 AC_DEFINE(USE_EMULATIONS, 1, [Use emulation support?]) ;; 758 esac 759fi 760AC_SUBST(extra_objects) 761AC_DEFINE_UNQUOTED(EMULATIONS, $EMULATIONS, [Supported emulations.]) 762AC_DEFINE_UNQUOTED(DEFAULT_EMULATION, "$DEFAULT_EMULATION", 763 [Default emulation.]) 764 765reject_dev_configs=yes 766 767case ${reject_dev_configs}-${dev} in 768 yes-yes) # Oops. 769 AC_MSG_ERROR(GAS does not support the ${generic_target} configuration.) 770 ;; 771esac 772 773AC_SUBST(target_cpu_type) 774AC_SUBST(obj_format) 775AC_SUBST(te_file) 776AC_SUBST(install_tooldir) 777AC_SUBST(atof) 778dnl AC_SUBST(emulation) 779 780# do we need the opcodes library? 781case "${need_opcodes}" in 782yes) 783 OPCODES_LIB=../opcodes/libopcodes.la 784 ;; 785esac 786 787AC_SUBST(OPCODES_LIB) 788 789AC_DEFINE_UNQUOTED(TARGET_ALIAS, "${target_alias}", [Target alias.]) 790AC_DEFINE_UNQUOTED(TARGET_CANONICAL, "${target}", [Canonical target.]) 791AC_DEFINE_UNQUOTED(TARGET_CPU, "${target_cpu}", [Target CPU.]) 792AC_DEFINE_UNQUOTED(TARGET_VENDOR, "${target_vendor}", [Target vendor.]) 793AC_DEFINE_UNQUOTED(TARGET_OS, "${target_os}", [Target OS.]) 794 795AC_PROG_YACC 796AM_PROG_LEX 797 798ALL_LINGUAS="fr tr es rw id ru fi ja zh_CN" 799ZW_GNU_GETTEXT_SISTER_DIR 800AM_PO_SUBDIRS 801 802AM_MAINTAINER_MODE 803AM_CONDITIONAL(GENINSRC_NEVER, false) 804AC_EXEEXT 805 806AC_CHECK_HEADERS(string.h stdlib.h memory.h strings.h unistd.h errno.h sys/types.h limits.h locale.h time.h sys/stat.h) 807ACX_HEADER_STRING 808 809# Put this here so that autoconf's "cross-compiling" message doesn't confuse 810# people who are not cross-compiling but are compiling cross-assemblers. 811AC_MSG_CHECKING(whether compiling a cross-assembler) 812if test "${host}" = "${target}"; then 813 cross_gas=no 814else 815 cross_gas=yes 816 AC_DEFINE(CROSS_COMPILE, 1, [Compiling cross-assembler?]) 817fi 818AC_MSG_RESULT($cross_gas) 819 820dnl ansidecl.h will deal with const 821dnl AC_C_CONST 822AC_FUNC_ALLOCA 823AC_C_INLINE 824 825# VMS doesn't have unlink. 826AC_CHECK_FUNCS(unlink remove, break) 827AC_CHECK_FUNCS(sbrk setlocale) 828 829AM_LC_MESSAGES 830 831# do we need the math library? 832case "${need_libm}" in 833yes) 834 LT_LIB_M 835 AC_SUBST(LIBM) 836 ;; 837esac 838 839# Some non-ANSI preprocessors botch requoting inside strings. That's bad 840# enough, but on some of those systems, the assert macro relies on requoting 841# working properly! 842GAS_WORKING_ASSERT 843 844# On some systems, the system header files may not declare malloc, realloc, 845# and free. There are places where gas needs these functions to have been 846# declared -- such as when taking their addresses. 847gas_test_headers=" 848#ifdef HAVE_MEMORY_H 849#include <memory.h> 850#endif 851#ifdef HAVE_STRING_H 852#include <string.h> 853#else 854#ifdef HAVE_STRINGS_H 855#include <strings.h> 856#endif 857#endif 858#ifdef HAVE_STDLIB_H 859#include <stdlib.h> 860#endif 861#ifdef HAVE_UNISTD_H 862#include <unistd.h> 863#endif 864" 865 866# Does errno.h declare errno, or do we have to add a separate declaration 867# for it? 868GAS_CHECK_DECL_NEEDED(errno, f, int f, [ 869#ifdef HAVE_ERRNO_H 870#include <errno.h> 871#endif 872]) 873 874AC_MSG_CHECKING(for a known getopt prototype in unistd.h) 875AC_CACHE_VAL(gas_cv_decl_getopt_unistd_h, 876[AC_COMPILE_IFELSE([AC_LANG_PROGRAM([#include <unistd.h>], [extern int getopt (int, char *const*, const char *);])], 877gas_cv_decl_getopt_unistd_h=yes, gas_cv_decl_getopt_unistd_h=no)]) 878AC_MSG_RESULT($gas_cv_decl_getopt_unistd_h) 879if test $gas_cv_decl_getopt_unistd_h = yes; then 880 AC_DEFINE([HAVE_DECL_GETOPT], 1, 881 [Is the prototype for getopt in <unistd.h> in the expected format?]) 882fi 883 884GAS_CHECK_DECL_NEEDED(environ, f, char **f, $gas_test_headers) 885GAS_CHECK_DECL_NEEDED(ffs, f, int (*f)(int), $gas_test_headers) 886GAS_CHECK_DECL_NEEDED(free, f, void (*f)(), $gas_test_headers) 887GAS_CHECK_DECL_NEEDED(malloc, f, char *(*f)(), $gas_test_headers) 888GAS_CHECK_DECL_NEEDED(sbrk, f, char *(*f)(), $gas_test_headers) 889GAS_CHECK_DECL_NEEDED(strstr, f, char *(*f)(), $gas_test_headers) 890 891AC_CHECK_DECLS([free, getenv, malloc, mempcpy, realloc, stpcpy, strstr, vsnprintf, asprintf]) 892 893BFD_BINARY_FOPEN 894 895# Link in zlib if we can. This allows us to write compressed debug sections. 896AM_ZLIB 897 898# Support for VMS timestamps via cross compile 899 900if test "$ac_cv_header_time_h" = yes; then 901 GAS_HAVE_TIME_TYPE_MEMBER(struct tm, tm_gmtoff) 902fi 903 904if test "$ac_cv_header_sys_stat_h" = yes; then 905 GAS_HAVE_SYS_STAT_TYPE_MEMBER(struct stat, st_mtim, tv_sec) 906 GAS_HAVE_SYS_STAT_TYPE_MEMBER(struct stat, st_mtim, tv_nsec) 907fi 908 909 910dnl Required for html, pdf, install-pdf and install-html targets. 911AC_SUBST(datarootdir) 912AC_SUBST(docdir) 913AC_SUBST(htmldir) 914AC_SUBST(pdfdir) 915 916dnl This must come last. 917 918dnl We used to make symlinks to files in the source directory, but now 919dnl we just use the right name for .c files, and create .h files in 920dnl the build directory which include the right .h file. Make sure 921dnl the old symlinks don't exist, so that a reconfigure in an existing 922dnl directory behaves reasonably. 923 924AC_CONFIG_FILES(Makefile doc/Makefile po/Makefile.in:po/Make-in) 925AC_CONFIG_COMMANDS([default], 926[rm -f targ-cpu.c targ-cpu.h obj-format.h obj-format.c targ-env.h atof-targ.c itbl-cpu.h 927 echo '#include "tc-'"${target_cpu_type}"'.h"' > targ-cpu.h 928 echo '#include "obj-'"${obj_format}"'.h"' > obj-format.h 929 echo '#include "te-'"${te_file}"'.h"' > targ-env.h 930 echo '#include "itbl-'"${target_cpu_type}"'.h"' > itbl-cpu.h 931 if test "x$cgen_cpu_prefix" != x ; then 932 echo '#include "opcodes/'"${cgen_cpu_prefix}"'-desc.h"' > cgen-desc.h 933 fi], 934[target_cpu_type=${target_cpu_type} 935 cgen_cpu_prefix=${cgen_cpu_prefix} 936 obj_format=${obj_format} 937 te_file=${te_file}]) 938 939AC_OUTPUT 940