1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * Copyright 2015 Freescale Semiconductor
4 *
5 * Freescale LS1043ARDB board-specific CPLD controlling supports.
6 */
7
8 #include <common.h>
9 #include <command.h>
10 #include <asm/io.h>
11 #include "cpld.h"
12
cpld_read(unsigned int reg)13 u8 cpld_read(unsigned int reg)
14 {
15 void *p = (void *)CONFIG_SYS_CPLD_BASE;
16
17 return in_8(p + reg);
18 }
19
cpld_write(unsigned int reg,u8 value)20 void cpld_write(unsigned int reg, u8 value)
21 {
22 void *p = (void *)CONFIG_SYS_CPLD_BASE;
23
24 out_8(p + reg, value);
25 }
26
27 /* Set the boot bank to the alternate bank */
cpld_set_altbank(void)28 void cpld_set_altbank(void)
29 {
30 u16 reg = CPLD_CFG_RCW_SRC_NOR;
31 u8 reg4 = CPLD_READ(soft_mux_on);
32 u8 reg5 = (u8)(reg >> 1);
33 u8 reg6 = (u8)(reg & 1);
34 u8 reg7 = CPLD_READ(vbank);
35
36 cpld_rev_bit(®5);
37
38 CPLD_WRITE(soft_mux_on, reg4 | CPLD_SW_MUX_BANK_SEL | 1);
39
40 CPLD_WRITE(cfg_rcw_src1, reg5);
41 CPLD_WRITE(cfg_rcw_src2, reg6);
42
43 reg7 = (reg7 & ~CPLD_BANK_SEL_MASK) | CPLD_BANK_SEL_ALTBANK;
44 CPLD_WRITE(vbank, reg7);
45
46 CPLD_WRITE(system_rst, 1);
47 }
48
49 /* Set the boot bank to the default bank */
cpld_set_defbank(void)50 void cpld_set_defbank(void)
51 {
52 u16 reg = CPLD_CFG_RCW_SRC_NOR;
53 u8 reg4 = CPLD_READ(soft_mux_on);
54 u8 reg5 = (u8)(reg >> 1);
55 u8 reg6 = (u8)(reg & 1);
56
57 cpld_rev_bit(®5);
58
59 CPLD_WRITE(soft_mux_on, reg4 | CPLD_SW_MUX_BANK_SEL | 1);
60
61 CPLD_WRITE(cfg_rcw_src1, reg5);
62 CPLD_WRITE(cfg_rcw_src2, reg6);
63
64 CPLD_WRITE(vbank, 0);
65
66 CPLD_WRITE(system_rst, 1);
67 }
68
cpld_set_nand(void)69 void cpld_set_nand(void)
70 {
71 u16 reg = CPLD_CFG_RCW_SRC_NAND;
72 u8 reg5 = (u8)(reg >> 1);
73 u8 reg6 = (u8)(reg & 1);
74
75 cpld_rev_bit(®5);
76
77 CPLD_WRITE(soft_mux_on, 1);
78
79 CPLD_WRITE(cfg_rcw_src1, reg5);
80 CPLD_WRITE(cfg_rcw_src2, reg6);
81
82 CPLD_WRITE(system_rst, 1);
83 }
84
cpld_set_sd(void)85 void cpld_set_sd(void)
86 {
87 u16 reg = CPLD_CFG_RCW_SRC_SD;
88 u8 reg5 = (u8)(reg >> 1);
89 u8 reg6 = (u8)(reg & 1);
90
91 cpld_rev_bit(®5);
92
93 CPLD_WRITE(soft_mux_on, 1);
94
95 CPLD_WRITE(cfg_rcw_src1, reg5);
96 CPLD_WRITE(cfg_rcw_src2, reg6);
97
98 CPLD_WRITE(system_rst, 1);
99 }
100 #ifdef DEBUG
cpld_dump_regs(void)101 static void cpld_dump_regs(void)
102 {
103 printf("cpld_ver = %x\n", CPLD_READ(cpld_ver));
104 printf("cpld_ver_sub = %x\n", CPLD_READ(cpld_ver_sub));
105 printf("pcba_ver = %x\n", CPLD_READ(pcba_ver));
106 printf("soft_mux_on = %x\n", CPLD_READ(soft_mux_on));
107 printf("cfg_rcw_src1 = %x\n", CPLD_READ(cfg_rcw_src1));
108 printf("cfg_rcw_src2 = %x\n", CPLD_READ(cfg_rcw_src2));
109 printf("vbank = %x\n", CPLD_READ(vbank));
110 printf("sysclk_sel = %x\n", CPLD_READ(sysclk_sel));
111 printf("uart_sel = %x\n", CPLD_READ(uart_sel));
112 printf("sd1refclk_sel = %x\n", CPLD_READ(sd1refclk_sel));
113 printf("tdmclk_mux_sel = %x\n", CPLD_READ(tdmclk_mux_sel));
114 printf("sdhc_spics_sel = %x\n", CPLD_READ(sdhc_spics_sel));
115 printf("status_led = %x\n", CPLD_READ(status_led));
116 putc('\n');
117 }
118 #endif
119
cpld_rev_bit(unsigned char * value)120 void cpld_rev_bit(unsigned char *value)
121 {
122 u8 rev_val, val;
123 int i;
124
125 val = *value;
126 rev_val = val & 1;
127 for (i = 1; i <= 7; i++) {
128 val >>= 1;
129 rev_val <<= 1;
130 rev_val |= val & 1;
131 }
132
133 *value = rev_val;
134 }
135
do_cpld(cmd_tbl_t * cmdtp,int flag,int argc,char * const argv[])136 int do_cpld(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
137 {
138 int rc = 0;
139
140 if (argc <= 1)
141 return cmd_usage(cmdtp);
142
143 if (strcmp(argv[1], "reset") == 0) {
144 if (strcmp(argv[2], "altbank") == 0)
145 cpld_set_altbank();
146 else if (strcmp(argv[2], "nand") == 0)
147 cpld_set_nand();
148 else if (strcmp(argv[2], "sd") == 0)
149 cpld_set_sd();
150 else
151 cpld_set_defbank();
152 #ifdef DEBUG
153 } else if (strcmp(argv[1], "dump") == 0) {
154 cpld_dump_regs();
155 #endif
156 } else {
157 rc = cmd_usage(cmdtp);
158 }
159
160 return rc;
161 }
162
163 U_BOOT_CMD(
164 cpld, CONFIG_SYS_MAXARGS, 1, do_cpld,
165 "Reset the board or alternate bank",
166 "reset: reset to default bank\n"
167 "cpld reset altbank: reset to alternate bank\n"
168 "cpld reset nand: reset to boot from NAND flash\n"
169 "cpld reset sd: reset to boot from SD card\n"
170 #ifdef DEBUG
171 "cpld dump - display the CPLD registers\n"
172 #endif
173 );
174